Triggers

In many situations it is useful for a driver to be able to capture data based on some external event (trigger) as opposed to periodically polling for data. An IIO trigger can be provided by a device driver that also has an IIO device based on hardware generated events (e.g. data ready or threshold exceeded) or provided by a separate driver from an independent interrupt source (e.g. GPIO line connected to some external system, timer interrupt or user space writing a specific file in sysfs). A trigger may initiate data capture for a number of sensors and also it may be completely unrelated to the sensor itself.

IIO trigger sysfs interface

There are two locations in sysfs related to triggers:

  • /sys/bus/iio/devices/triggerY/*, this file is created once an IIO trigger is registered with the IIO core and corresponds to trigger with index Y. Because triggers can be very different depending on type there are few standard attributes that we can describe here:

    • name, trigger name that can be later used for association with a device.

    • sampling_frequency, some timer based triggers use this attribute to specify the frequency for trigger calls.

  • /sys/bus/iio/devices/iio:deviceX/trigger/*, this directory is created once the device supports a triggered buffer. We can associate a trigger with our device by writing the trigger’s name in the current_trigger file.

IIO trigger setup

Let’s see a simple example of how to setup a trigger to be used by a driver:

struct iio_trigger_ops trigger_ops = {
    .set_trigger_state = sample_trigger_state,
    .validate_device = sample_validate_device,
}

struct iio_trigger *trig;

/* first, allocate memory for our trigger */
trig = iio_trigger_alloc(dev, "trig-%s-%d", name, idx);

/* setup trigger operations field */
trig->ops = &trigger_ops;

/* now register the trigger with the IIO core */
iio_trigger_register(trig);

IIO trigger ops

Notice that a trigger has a set of operations attached:

  • set_trigger_state, switch the trigger on/off on demand.

  • validate_device, function to validate the device when the current trigger gets changed.

More details

struct iio_trigger_ops

operations structure for an iio_trigger.

Definition:

struct iio_trigger_ops {
    int (*set_trigger_state)(struct iio_trigger *trig, bool state);
    void (*reenable)(struct iio_trigger *trig);
    int (*validate_device)(struct iio_trigger *trig, struct iio_dev *indio_dev);
};

Members

set_trigger_state

switch on/off the trigger on demand

reenable

function to reenable the trigger when the use count is zero (may be NULL)

validate_device

function to validate the device when the current trigger gets changed.

Description

This is typically static const within a driver and shared by instances of a given device.

struct iio_trigger

industrial I/O trigger device

Definition:

struct iio_trigger {
    const struct iio_trigger_ops    *ops;
    struct module                   *owner;
    int id;
    const char                      *name;
    struct device                   dev;
    struct list_head                list;
    struct list_head                alloc_list;
    atomic_t use_count;
    struct irq_chip                 subirq_chip;
    int subirq_base;
    struct iio_subirq subirqs[CONFIG_IIO_CONSUMERS_PER_TRIGGER];
    unsigned long pool[BITS_TO_LONGS(CONFIG_IIO_CONSUMERS_PER_TRIGGER)];
    struct mutex                    pool_lock;
    bool attached_own_device;
    struct work_struct              reenable_work;
};

Members

ops

[DRIVER] operations structure

owner

[INTERN] owner of this driver module

id

[INTERN] unique id number

name

[DRIVER] unique name

dev

[DRIVER] associated device (if relevant)

list

[INTERN] used in maintenance of global trigger list

alloc_list

[DRIVER] used for driver specific trigger list

use_count

[INTERN] use count for the trigger.

subirq_chip

[INTERN] associate ‘virtual’ irq chip.

subirq_base

[INTERN] base number for irqs provided by trigger.

subirqs

[INTERN] information about the ‘child’ irqs.

pool

[INTERN] bitmap of irqs currently in use.

pool_lock

[INTERN] protection of the irq pool.

attached_own_device

[INTERN] if we are using our own device as trigger, i.e. if we registered a poll function to the same device as the one providing the trigger.

reenable_work

[INTERN] work item used to ensure reenable can sleep.

void iio_trigger_set_drvdata(struct iio_trigger *trig, void *data)

Set trigger driver data

Parameters

struct iio_trigger *trig

IIO trigger structure

void *data

Driver specific data

Description

Allows to attach an arbitrary pointer to an IIO trigger, which can later be retrieved by iio_trigger_get_drvdata().

void *iio_trigger_get_drvdata(struct iio_trigger *trig)

Get trigger driver data

Parameters

struct iio_trigger *trig

IIO trigger structure

Description

Returns the data previously set with iio_trigger_set_drvdata()

int iio_trigger_register(struct iio_trigger *trig_info)

register a trigger with the IIO core

Parameters

struct iio_trigger *trig_info

trigger to be registered

void iio_trigger_unregister(struct iio_trigger *trig_info)

unregister a trigger from the core

Parameters

struct iio_trigger *trig_info

trigger to be unregistered

int iio_trigger_set_immutable(struct iio_dev *indio_dev, struct iio_trigger *trig)

set an immutable trigger on destination

Parameters

struct iio_dev *indio_dev

IIO device structure containing the device

struct iio_trigger *trig

trigger to assign to device

bool iio_trigger_using_own(struct iio_dev *indio_dev)

tells us if we use our own HW trigger ourselves

Parameters

struct iio_dev *indio_dev

device to check

void iio_trigger_poll(struct iio_trigger *trig)

Call the IRQ trigger handler of the consumers

Parameters

struct iio_trigger *trig

trigger which occurred

Description

This function should only be called from a hard IRQ context.

void iio_trigger_poll_nested(struct iio_trigger *trig)

Call the threaded trigger handler of the consumers

Parameters

struct iio_trigger *trig

trigger which occurred

Description

This function should only be called from a kernel thread context.

struct iio_trigger *__iio_trigger_alloc(struct device *parent, struct module *this_mod, const char *fmt, ...)

Allocate a trigger

Parameters

struct device *parent

Device to allocate iio_trigger for

struct module *this_mod

module allocating the trigger

const char *fmt

trigger name format. If it includes format specifiers, the additional arguments following format are formatted and inserted in the resulting string replacing their respective specifiers.

...

variable arguments

Return

Pointer to allocated iio_trigger on success, NULL on failure.

struct iio_trigger *__devm_iio_trigger_alloc(struct device *parent, struct module *this_mod, const char *fmt, ...)

Resource-managed iio_trigger_alloc() Managed iio_trigger_alloc. iio_trigger allocated with this function is automatically freed on driver detach.

Parameters

struct device *parent

Device to allocate iio_trigger for

struct module *this_mod

module allocating the trigger

const char *fmt

trigger name format. If it includes format specifiers, the additional arguments following format are formatted and inserted in the resulting string replacing their respective specifiers.

...

variable arguments

Return

Pointer to allocated iio_trigger on success, NULL on failure.

int devm_iio_trigger_register(struct device *dev, struct iio_trigger *trig_info)

Resource-managed iio_trigger_register()

Parameters

struct device *dev

device this trigger was allocated for

struct iio_trigger *trig_info

trigger to register

Description

Managed iio_trigger_register(). The IIO trigger registered with this function is automatically unregistered on driver detach. This function calls iio_trigger_register() internally. Refer to that function for more information.

Return

0 on success, negative error number on failure.

int iio_validate_own_trigger(struct iio_dev *idev, struct iio_trigger *trig)

Check if a trigger and IIO device belong to the same device

Parameters

struct iio_dev *idev

the IIO device to check

struct iio_trigger *trig

the IIO trigger to check

Description

This function can be used as the validate_trigger callback for triggers that can only be attached to their own device.

Return

0 if both the trigger and the IIO device belong to the same device, -EINVAL otherwise.

int iio_trigger_validate_own_device(struct iio_trigger *trig, struct iio_dev *indio_dev)

Check if a trigger and IIO device belong to the same device

Parameters

struct iio_trigger *trig

The IIO trigger to check

struct iio_dev *indio_dev

the IIO device to check

Description

This function can be used as the validate_device callback for triggers that can only be attached to their own device.

Return

0 if both the trigger and the IIO device belong to the same device, -EINVAL otherwise.