GENERIC SYSTEM INTERCONNECT SUBSYSTEM

Introduction

This framework is designed to provide a standard kernel interface to control the settings of the interconnects on an SoC. These settings can be throughput, latency and priority between multiple interconnected devices or functional blocks. This can be controlled dynamically in order to save power or provide maximum performance.

The interconnect bus is hardware with configurable parameters, which can be set on a data path according to the requests received from various drivers. An example of interconnect buses are the interconnects between various components or functional blocks in chipsets. There can be multiple interconnects on an SoC that can be multi-tiered.

Below is a simplified diagram of a real-world SoC interconnect bus topology.

+----------------+    +----------------+
| HW Accelerator |--->|      M NoC     |<---------------+
+----------------+    +----------------+                |
                        |      |                    +------------+
 +-----+  +-------------+      V       +------+     |            |
 | DDR |  |                +--------+  | PCIe |     |            |
 +-----+  |                | Slaves |  +------+     |            |
   ^ ^    |                +--------+     |         |   C NoC    |
   | |    V                               V         |            |
+------------------+   +------------------------+   |            |   +-----+
|                  |-->|                        |-->|            |-->| CPU |
|                  |-->|                        |<--|            |   +-----+
|     Mem NoC      |   |         S NoC          |   +------------+
|                  |<--|                        |---------+    |
|                  |<--|                        |<------+ |    |   +--------+
+------------------+   +------------------------+       | |    +-->| Slaves |
  ^  ^    ^    ^          ^                             | |        +--------+
  |  |    |    |          |                             | V
+------+  |  +-----+   +-----+  +---------+   +----------------+   +--------+
| CPUs |  |  | GPU |   | DSP |  | Masters |-->|       P NoC    |-->| Slaves |
+------+  |  +-----+   +-----+  +---------+   +----------------+   +--------+
          |
      +-------+
      | Modem |
      +-------+

Terminology

Interconnect provider is the software definition of the interconnect hardware. The interconnect providers on the above diagram are M NoC, S NoC, C NoC, P NoC and Mem NoC.

Interconnect node is the software definition of the interconnect hardware port. Each interconnect provider consists of multiple interconnect nodes, which are connected to other SoC components including other interconnect providers. The point on the diagram where the CPUs connect to the memory is called an interconnect node, which belongs to the Mem NoC interconnect provider.

Interconnect endpoints are the first or the last element of the path. Every endpoint is a node, but not every node is an endpoint.

Interconnect path is everything between two endpoints including all the nodes that have to be traversed to reach from a source to destination node. It may include multiple master-slave pairs across several interconnect providers.

Interconnect consumers are the entities which make use of the data paths exposed by the providers. The consumers send requests to providers requesting various throughput, latency and priority. Usually the consumers are device drivers, that send request based on their needs. An example for a consumer is a video decoder that supports various formats and image sizes.

Interconnect providers

Interconnect provider is an entity that implements methods to initialize and configure interconnect bus hardware. The interconnect provider drivers should be registered with the interconnect provider core.

struct icc_onecell_data

driver data for onecell interconnect providers

Definition

struct icc_onecell_data {
  unsigned int num_nodes;
  struct icc_node *nodes[];
};

Members

num_nodes
number of nodes in this device
nodes
array of pointers to the nodes in this device
struct icc_provider

interconnect provider (controller) entity that might provide multiple interconnect controls

Definition

struct icc_provider {
  struct list_head        provider_list;
  struct list_head        nodes;
  int (*set)(struct icc_node *src, struct icc_node *dst);
  int (*aggregate)(struct icc_node *node, u32 tag, u32 avg_bw, u32 peak_bw, u32 *agg_avg, u32 *agg_peak);
  void (*pre_aggregate)(struct icc_node *node);
  struct icc_node* (*xlate)(struct of_phandle_args *spec, void *data);
  struct device           *dev;
  int users;
  void *data;
};

Members

provider_list
list of the registered interconnect providers
nodes
internal list of the interconnect provider nodes
set
pointer to device specific set operation function
aggregate
pointer to device specific aggregate operation function
pre_aggregate
pointer to device specific function that is called before the aggregation begins (optional)
xlate
provider-specific callback for mapping nodes from phandle arguments
dev
the device this interconnect provider belongs to
users
count of active users
data
pointer to private data
struct icc_node

entity that is part of the interconnect topology

Definition

struct icc_node {
  int id;
  const char              *name;
  struct icc_node         **links;
  size_t num_links;
  struct icc_provider     *provider;
  struct list_head        node_list;
  struct list_head        search_list;
  struct icc_node         *reverse;
  u8 is_traversed:1;
  struct hlist_head       req_list;
  u32 avg_bw;
  u32 peak_bw;
  void *data;
};

Members

id
platform specific node id
name
node name used in debugfs
links
a list of targets pointing to where we can go next when traversing
num_links
number of links to other interconnect nodes
provider
points to the interconnect provider of this node
node_list
the list entry in the parent provider's "nodes" list
search_list
list used when walking the nodes graph
reverse
pointer to previous node when walking the nodes graph
is_traversed
flag that is used when walking the nodes graph
req_list
a list of QoS constraint requests associated with this node
avg_bw
aggregated value of average bandwidth requests from all consumers
peak_bw
aggregated value of peak bandwidth requests from all consumers
data
pointer to private data

Interconnect consumers

Interconnect consumers are the clients which use the interconnect APIs to get paths between endpoints and set their bandwidth/latency/QoS requirements for these interconnect paths. These interfaces are not currently documented.