Kernel driver lm25066

Supported chips:

Author: Guenter Roeck <linux@roeck-us.net>

Description

This driver supports hardware monitoring for National Semiconductor / TI LM25056, LM25066, LM5064, and LM5066/LM5066I Power Management, Monitoring, Control, and Protection ICs.

The driver is a client driver to the core PMBus driver. Please see Kernel driver pmbus for details on PMBus client drivers.

Usage Notes

This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see How to instantiate I2C devices for details.

Platform data support

The driver supports standard PMBus driver platform data.

Sysfs entries

The following attributes are supported. Limits are read-write; all other attributes are read-only.

in1_label “vin”
in1_input Measured input voltage.
in1_average Average measured input voltage.
in1_min Minimum input voltage.
in1_max Maximum input voltage.
in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
in2_label “vmon”
in2_input Measured voltage on VAUX pin
in2_min Minimum VAUX voltage (LM25056 only).
in2_max Maximum VAUX voltage (LM25056 only).
in2_min_alarm VAUX voltage low alarm (LM25056 only).
in2_max_alarm VAUX voltage high alarm (LM25056 only).
in3_label “vout1” Not supported on LM25056.
in3_input Measured output voltage.
in3_average Average measured output voltage.
in3_min Minimum output voltage.
in3_min_alarm Output voltage low alarm.
curr1_label “iin”
curr1_input Measured input current.
curr1_average Average measured input current.
curr1_max Maximum input current.
curr1_max_alarm Input current high alarm.
power1_label “pin”
power1_input Measured input power.
power1_average Average measured input power.
power1_max Maximum input power limit.
power1_alarm Input power alarm
power1_input_highest Historical maximum power.
power1_reset_history Write any value to reset maximum power history.
temp1_input Measured temperature.
temp1_max Maximum temperature.
temp1_crit Critical high temperature.
temp1_max_alarm Chip temperature high alarm.
temp1_crit_alarm Chip temperature critical high alarm.