diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-03-21 12:35:20 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-03-21 12:35:20 -0700 |
| commit | e09bf86f3d53ecf4da61163d88036c4c16419d70 (patch) | |
| tree | 48993f46e882041015edb54c0f9ef7e7f98bd5e0 | |
| parent | 2ac2b1665d3fbec6ca709dd6ef3ea05f4a51ee4c (diff) | |
| parent | a788e53c05aee6e3d60792a59e10c0fac56b5086 (diff) | |
| download | linux-e09bf86f3d53ecf4da61163d88036c4c16419d70.tar.gz | |
Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
178 files changed, 9080 insertions, 2436 deletions
diff --git a/Documentation/ABI/testing/configfs-usb-gadget-ffs b/Documentation/ABI/testing/configfs-usb-gadget-ffs index e39b27653c65c..bf8936ff6d38c 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-ffs +++ b/Documentation/ABI/testing/configfs-usb-gadget-ffs @@ -4,6 +4,14 @@ KernelVersion: 3.13 Description: The purpose of this directory is to create and remove it. A corresponding USB function instance is created/removed. - There are no attributes here. - All parameters are set through FunctionFS. + All attributes are read only: + + ============= ============================================ + ready 1 if the function is ready to be used, E.G. + if userspace has written descriptors and + strings to ep0, so the gadget can be + enabled - 0 otherwise. + ============= ============================================ + + All other parameters are set through FunctionFS. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 2b7108e219775..af9b653422f16 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -442,6 +442,16 @@ What: /sys/bus/usb/devices/usbX/descriptors Description: Contains the interface descriptors, in binary. +What: /sys/bus/usb/devices/usbX/bos_descriptors +Date: March 2024 +Contact: Elbert Mai <code@elbertmai.com> +Description: + Binary file containing the cached binary device object store (BOS) + of the device. This consists of the BOS descriptor followed by the + set of device capability descriptors. All descriptors read from + this file are in bus-endian format. Note that the kernel will not + request the BOS from a device if its bcdUSB is less than 0x0201. + What: /sys/bus/usb/devices/usbX/idProduct Description: Product ID, in hexadecimal. diff --git a/Documentation/ABI/testing/sysfs-class-usb_role b/Documentation/ABI/testing/sysfs-class-usb_role index 3b810a425a52c..9fab3f06679e2 100644 --- a/Documentation/ABI/testing/sysfs-class-usb_role +++ b/Documentation/ABI/testing/sysfs-class-usb_role @@ -19,3 +19,9 @@ Description: - none - host - device + +What: /sys/class/usb_role/<switch>/connector +Date: Feb 2024 +Contact: Heikki Krogerus <heikki.krogerus@linux.intel.com> +Description: + Optional symlink to the USB Type-C connector. diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml index 8afb40c67af31..33ae1f786802e 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml @@ -26,6 +26,7 @@ properties: - enum: - qcom,pm4125-vbus-reg - qcom,pm6150-vbus-reg + - qcom,pmi632-vbus-reg - const: qcom,pm8150b-vbus-reg reg: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml index d3f3259ef77d5..4310bae6c58ef 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml @@ -23,6 +23,7 @@ properties: oneOf: - items: - enum: + - qcom,qcm6490-pmic-glink - qcom,sc8180x-pmic-glink - qcom,sc8280xp-pmic-glink - qcom,sm8350-pmic-glink diff --git a/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml b/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml new file mode 100644 index 0000000000000..37161d2aa96e1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,q6usb.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,q6usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm ASoC DPCM USB backend DAI + +maintainers: + - Wesley Cheng <quic_wcheng@quicinc.com> + +description: + The USB port is a supported AFE path on the Q6 DSP. This ASoC DPCM + backend DAI will communicate the required settings to initialize the + XHCI host controller properly for enabling the offloaded audio stream. + Parameters defined under this node will carry settings, which will be + passed along during the QMI stream enable request and configuration of + the XHCI host controller. + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - qcom,q6usb + + iommus: + maxItems: 1 + + "#sound-dai-cells": + const: 1 + + qcom,usb-audio-intr-idx: + description: + Desired XHCI interrupter number to use. Depending on the audio DSP + on the platform, it will operate on a specific XHCI interrupter. + $ref: /schemas/types.yaml#/definitions/uint16 + maximum: 8 + +required: + - compatible + - "#sound-dai-cells" + - qcom,usb-audio-intr-idx + +additionalProperties: false + +examples: + - | + dais { + compatible = "qcom,q6usb"; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x180f 0x0>; + qcom,usb-audio-intr-idx = /bits/ 16 <2>; + }; diff --git a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml index e4d893369d57b..3f5857aee3b0e 100644 --- a/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml +++ b/Documentation/devicetree/bindings/usb/analogix,anx7411.yaml @@ -23,24 +23,11 @@ properties: connector: type: object $ref: ../connector/usb-connector.yaml - unevaluatedProperties: false - - description: - Properties for usb c connector. properties: compatible: const: usb-c-connector - power-role: true - - data-role: true - - try-power-role: true - - required: - - compatible - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml index b7e664f7395b3..3b56e0edb1c67 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.yaml @@ -313,7 +313,7 @@ properties: usb-phy: description: phandle for the PHY device. Use "phys" instead. - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 deprecated: true fsl,usbphy: diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml index f9410eb76a621..8b25b9a01ced3 100644 --- a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml +++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml @@ -27,13 +27,8 @@ properties: vcc-supply: description: power supply (2.7V-5.5V) - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true port: $ref: /schemas/graph.yaml#/$defs/port-base @@ -79,6 +74,9 @@ required: - reg - port +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml index 87986c45be88e..2ed178f16a782 100644 --- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml +++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml @@ -77,6 +77,7 @@ properties: - const: usb-ehci - enum: - generic-ehci + - marvell,ac5-ehci - marvell,armada-3700-ehci - marvell,orion-ehci - nuvoton,npcm750-ehci diff --git a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml index d3b2b666ec2a4..88e1607cf053a 100644 --- a/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml +++ b/Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml @@ -33,13 +33,8 @@ properties: vcc-supply: description: power supply - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true port: $ref: /schemas/graph.yaml#/properties/port @@ -54,6 +49,9 @@ required: - orientation-switch - port +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml b/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml new file mode 100644 index 0000000000000..f3011694393d8 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/hisilicon,hi3798mv200-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Hi3798MV200 DWC3 USB SoC controller + +maintainers: + - Yang Xiwen <forbidden405@foxmail.com> + +properties: + compatible: + const: hisilicon,hi3798mv200-dwc3 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + + clocks: + items: + - description: Controller bus clock + - description: Controller suspend clock + - description: Controller reference clock + - description: Controller gm clock + - description: Controller gs clock + - description: Controller utmi clock + - description: Controller pipe clock + + clock-names: + items: + - const: bus + - const: suspend + - const: ref + - const: gm + - const: gs + - const: utmi + - const: pipe + + resets: + maxItems: 1 + + reset-names: + const: soft + +patternProperties: + '^usb@[0-9a-f]+$': + $ref: snps,dwc3.yaml# + +required: + - compatible + - ranges + - '#address-cells' + - '#size-cells' + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb { + compatible = "hisilicon,hi3798mv200-dwc3"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clk_bus>, + <&clk_suspend>, + <&clk_ref>, + <&clk_gm>, + <&clk_gs>, + <&clk_utmi>, + <&clk_pipe>; + clock-names = "bus", "suspend", "ref", "gm", "gs", "utmi", "pipe"; + resets = <&crg 0xb0 12>; + reset-names = "soft"; + + usb@98a0000 { + compatible = "snps,dwc3"; + reg = <0x98a0000 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_bus>, + <&clk_suspend>, + <&clk_ref>; + clock-names = "bus_early", "suspend", "ref"; + phys = <&usb2_phy1_port2>, <&combphy0 0>; + phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; + dr_mode = "host"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ite,it5205.yaml b/Documentation/devicetree/bindings/usb/ite,it5205.yaml new file mode 100644 index 0000000000000..36ec4251b5f20 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ite,it5205.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ite,it5205.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE IT5202 Type-C USB Alternate Mode Passive MUX + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + - Tianping Fang <tianping.fang@mediatek.com> + +properties: + compatible: + const: ite,it5205 + + reg: + maxItems: 1 + + vcc-supply: + description: Power supply for VCC pin (3.3V) + + mode-switch: + description: Flag the port as possible handle of altmode switching + type: boolean + + orientation-switch: + description: Flag the port as possible handler of orientation switching + type: boolean + + ite,ovp-enable: + description: Enable Over Voltage Protection functionality + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the IT5205 to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + +required: + - compatible + - reg + - orientation-switch + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c2 { + #address-cells = <1>; + #size-cells = <0>; + + typec-mux@48 { + compatible = "ite,it5205"; + reg = <0x48>; + + mode-switch; + orientation-switch; + + vcc-supply = <&mt6359_vibr_ldo_reg>; + + port { + it5205_usbss_sbu: endpoint { + remote-endpoint = <&typec_controller>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml index a59d91243ac83..d4e187c78a0b5 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -185,7 +185,10 @@ properties: 2 - used by mt2712 etc, revision 2 with following IPM rule; 101 - used by mt8183, specific 1.01; 102 - used by mt8192, specific 1.02; - enum: [1, 2, 101, 102] + 103 - used by mt8195, IP0, specific 1.03; + 105 - used by mt8195, IP2, specific 1.05; + 106 - used by mt8195, IP3, specific 1.06; + enum: [1, 2, 101, 102, 103, 105, 106] mediatek,u3p-dis-msk: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml index 445183d9d6db1..e2a72deae7760 100644 --- a/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml +++ b/Documentation/devicetree/bindings/usb/microchip,usb5744.yaml @@ -72,8 +72,6 @@ allOf: i2c-bus: false else: $ref: /schemas/usb/usb-device.yaml - required: - - peer-hub additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml index eee548ac1abea..d805dde80796f 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn36502.yaml @@ -20,13 +20,8 @@ properties: vdd18-supply: description: Power supply for VDD18 pin - retimer-switch: - description: Flag the port as possible handle of SuperSpeed signals retiming - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + orientation-switch: true + retimer-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -49,6 +44,9 @@ required: - compatible - reg +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml index eaedb4cc6b6cc..65a8632b4d9ed 100644 --- a/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml +++ b/Documentation/devicetree/bindings/usb/nxp,ptn5110.yaml @@ -11,7 +11,9 @@ maintainers: properties: compatible: - const: nxp,ptn5110 + items: + - const: nxp,ptn5110 + - const: tcpci reg: maxItems: 1 @@ -41,7 +43,7 @@ examples: #size-cells = <0>; tcpci@50 { - compatible = "nxp,ptn5110"; + compatible = "nxp,ptn5110", "tcpci"; reg = <0x50>; interrupt-parent = <&gpio3>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; diff --git a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml index c0201da002f62..589914d22bf25 100644 --- a/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml +++ b/Documentation/devicetree/bindings/usb/onnn,nb7vpq904m.yaml @@ -21,14 +21,8 @@ properties: description: power supply (1.8V) enable-gpios: true - - retimer-switch: - description: Flag the port as possible handle of SuperSpeed signals retiming - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + orientation-switch: true + retimer-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -95,6 +89,9 @@ required: - compatible - reg +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index 63d150b216c52..38a3404ec71bb 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -102,7 +102,7 @@ properties: description: | Different types of interrupts are used based on HS PHY used on target: - pwr_event: Used for wakeup based on other power events. - - hs_phY_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is + - hs_phy_irq: Apart from DP/DM/QUSB2 PHY interrupts, there is hs_phy_irq which is not triggered by default and its functionality is mutually exclusive to that of {dp/dm}_hs_phy_irq and qusb2_phy_irq. diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml index 55df3129a0bc7..d9694570c419e 100644 --- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml @@ -14,8 +14,19 @@ description: properties: compatible: - enum: - - qcom,pm8150b-typec + oneOf: + - enum: + - qcom,pmi632-typec + - qcom,pm8150b-typec + - items: + - enum: + - qcom,pm6150-typec + - const: qcom,pm8150b-typec + - items: + - enum: + - qcom,pm4125-typec + - const: qcom,pmi632-typec + connector: type: object @@ -24,9 +35,11 @@ properties: reg: description: Type-C port and pdphy SPMI register base offsets + minItems: 1 maxItems: 2 interrupts: + minItems: 8 items: - description: Type-C CC attach notification, VBUS error, tCCDebounce done - description: Type-C VCONN powered @@ -46,6 +59,7 @@ properties: - description: Power Domain Fast Role Swap event interrupt-names: + minItems: 8 items: - const: or-rid-detect-change - const: vpd-detect @@ -81,7 +95,33 @@ required: - interrupts - interrupt-names - vdd-vbus-supply - - vdd-pdphy-supply + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi632-typec + then: + properties: + reg: + maxItems: 1 + interrupts: + maxItems: 8 + interrupt-names: + maxItems: 8 + vdd-pdphy-supply: false + else: + properties: + reg: + maxItems: 2 + interrupts: + minItems: 16 + interrupt-names: + maxItems: 16 + required: + - vdd-pdphy-supply additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml index 7ddfd3313a185..96346723f3e9c 100644 --- a/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,wcd939x-usbss.yaml @@ -35,13 +35,8 @@ properties: vdd-supply: description: USBSS VDD power supply - mode-switch: - description: Flag the port as possible handle of altmode switching - type: boolean - - orientation-switch: - description: Flag the port as possible handler of orientation switching - type: boolean + mode-switch: true + orientation-switch: true ports: $ref: /schemas/graph.yaml#/properties/ports @@ -63,6 +58,9 @@ required: - reg - ports +allOf: + - $ref: usb-switch.yaml# + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml index f0784d2e86dae..0874fc21f66fb 100644 --- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml +++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml @@ -21,6 +21,12 @@ properties: reg: true + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + vdd-supply: description: phandle to the regulator that provides power to the hub. @@ -30,6 +36,36 @@ properties: description: phandle to the peer hub on the controller. + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + 1st downstream facing USB port + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: + 2nd downstream facing USB port + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: + 3rd downstream facing USB port + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: + 4th downstream facing USB port + +patternProperties: + '^.*@[1-4]$': + description: The hard wired USB devices + type: object + $ref: /schemas/usb/usb-device.yaml + required: - peer-hub - compatible @@ -50,6 +86,13 @@ examples: reg = <1>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_3_0>; + #address-cells = <1>; + #size-cells = <0>; + /* USB 2.0 device on port 2 */ + device@2 { + compatible = "usb123,4567"; + reg = <2>; + }; }; /* 3.0 hub on port 2 */ @@ -58,5 +101,17 @@ examples: reg = <2>; vdd-supply = <&pp3300_hub>; peer-hub = <&hub_2_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + /* Type-A connector on port 4 */ + port@4 { + reg = <4>; + endpoint { + remote-endpoint = <&usb_a0_ss>; + }; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml index fec5651f56029..f6e6d084d1c5a 100644 --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml @@ -14,7 +14,10 @@ properties: const: ti,am62-usb reg: - maxItems: 1 + minItems: 1 + items: + - description: USB CFG register space + - description: USB PHY2 register space ranges: true @@ -82,7 +85,8 @@ examples: usbss1: usb@f910000 { compatible = "ti,am62-usb"; - reg = <0x00 0x0f910000 0x00 0x800>; + reg = <0x00 0x0f910000 0x00 0x800>, + <0x00 0x0f918000 0x00 0x400>; clocks = <&k3_clks 162 3>; clock-names = "ref"; ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>; diff --git a/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml new file mode 100644 index 0000000000000..8ef117793e113 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,usb8020b.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,usb8020b.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI USB8020B USB 3.0 hub controller + +maintainers: + - Macpaul Lin <macpaul.lin@mediatek.com> + +allOf: + - $ref: usb-device.yaml# + +properties: + compatible: + enum: + - usb451,8025 + - usb451,8027 + + reg: true + + reset-gpios: + items: + - description: GPIO specifier for GRST# pin. + + vdd-supply: + description: + VDD power supply to the hub + + peer-hub: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to the peer hub on the controller. + +required: + - compatible + - reg + - peer-hub + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + usb { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + + /* 2.0 hub on port 1 */ + hub_2_0: hub@1 { + compatible = "usb451,8027"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + + /* 3.0 hub on port 2 */ + hub_3_0: hub@2 { + compatible = "usb451,8025"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&usb_hub_fixed_3v3>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml index 6734f4d3aa789..9b3ea23654af6 100644 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.yaml @@ -37,10 +37,11 @@ properties: description: Should specify the GPIO detecting a VBus insertion maxItems: 1 - vbus-regulator: - description: Should specify the regulator supplying current drawn from - the VBus line. - $ref: /schemas/types.yaml#/definitions/phandle + vbus-supply: + description: regulator supplying VBUS. It will be enabled and disabled + dynamically in OTG mode. If the regulator is controlled by a + GPIO line, this should be modeled as a regulator-fixed and + referenced by this supply. wakeup-source: description: @@ -65,7 +66,7 @@ examples: vcc-supply = <&hsusb1_vcc_regulator>; reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; - vbus-regulator = <&vbus_regulator>; + vbus-supply = <&vbus_regulator>; #phy-cells = <0>; }; diff --git a/Documentation/devicetree/bindings/usb/usb-switch.yaml b/Documentation/devicetree/bindings/usb/usb-switch.yaml new file mode 100644 index 0000000000000..da76118e73a53 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-switch.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/usb-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: USB Orientation and Mode Switches Common Properties + +maintainers: + - Greg Kroah-Hartman <gregkh@linuxfoundation.org> + +description: + Common properties for devices handling USB mode and orientation switching. + +properties: + mode-switch: + description: Possible handler of altmode switching + type: boolean + + orientation-switch: + description: Possible handler of orientation switching + type: boolean + + retimer-switch: + description: Possible handler of SuperSpeed signals retiming + type: boolean + + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the device to a TypeC controller for the purpose of + handling altmode muxing and orientation switching. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Super Speed (SS) Output endpoint to the Type-C connector + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: + Super Speed (SS) Input endpoint from the Super-Speed PHY + unevaluatedProperties: false + + properties: + endpoint: + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false + properties: + data-lanes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + uniqueItems: true + items: + maximum: 8 + +oneOf: + - required: + - port + - required: + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml index 326b14f05d1c4..1761b7aa92f05 100644 --- a/Documentation/devicetree/bindings/usb/usb.yaml +++ b/Documentation/devicetree/bindings/usb/usb.yaml @@ -25,6 +25,8 @@ properties: usb-phy: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 description: List of all the USB PHYs on this HCD to be accepted by the legacy USB Physical Layer subsystem. diff --git a/Documentation/driver-api/usb/callbacks.rst b/Documentation/driver-api/usb/callbacks.rst index 2b80cf54bcc31..927da49b8f002 100644 --- a/Documentation/driver-api/usb/callbacks.rst +++ b/Documentation/driver-api/usb/callbacks.rst @@ -99,8 +99,10 @@ The disconnect() callback This callback is a signal to break any connection with an interface. You are not allowed any IO to a device after returning from this callback. You also may not do any other operation that may interfere -with another driver bound the interface, eg. a power management -operation. +with another driver bound to the interface, eg. a power management +operation. Outstanding operations on the device must be completed or +aborted before this callback may return. + If you are called due to a physical disconnection, all your URBs will be killed by usbcore. Note that in this case disconnect will be called some time after the physical disconnection. Thus your driver must be prepared diff --git a/Documentation/usb/functionfs.rst b/Documentation/usb/functionfs.rst index a3054bea38f3c..d05a775bc45bc 100644 --- a/Documentation/usb/functionfs.rst +++ b/Documentation/usb/functionfs.rst @@ -2,6 +2,9 @@ How FunctionFS works ==================== +Overview +======== + From kernel point of view it is just a composite function with some unique behaviour. It may be added to an USB configuration only after the user space driver has registered by writing descriptors and @@ -66,3 +69,36 @@ have been written to their ep0's. Conversely, the gadget is unregistered after the first USB function closes its endpoints. + +DMABUF interface +================ + +FunctionFS additionally supports a DMABUF based interface, where the +userspace can attach DMABUF objects (externally created) to an endpoint, +and subsequently use them for data transfers. + +A userspace application can then use this interface to share DMABUF +objects between several interfaces, allowing it to transfer data in a +zero-copy fashion, for instance between IIO and the USB stack. + +As part of this interface, three new IOCTLs have been added. These three +IOCTLs have to be performed on a data endpoint (ie. not ep0). They are: + + ``FUNCTIONFS_DMABUF_ATTACH(int)`` + Attach the DMABUF object, identified by its file descriptor, to the + data endpoint. Returns zero on success, and a negative errno value + on error. + + ``FUNCTIONFS_DMABUF_DETACH(int)`` + Detach the given DMABUF object, identified by its file descriptor, + from the data endpoint. Returns zero on success, and a negative + errno value on error. Note that closing the endpoint's file + descriptor will automatically detach all attached DMABUFs. + + ``FUNCTIONFS_DMABUF_TRANSFER(struct usb_ffs_dmabuf_transfer_req *)`` + Enqueue the previously attached DMABUF to the transfer queue. + The argument is a structure that packs the DMABUF's file descriptor, + the size in bytes to transfer (which should generally correspond to + the size of the DMABUF), and a 'flags' field which is unused + for now. Returns zero on success, and a negative errno value on + error. diff --git a/Documentation/usb/gadget-testing.rst b/Documentation/usb/gadget-testing.rst index 077dfac7ed98f..b086c7ab72f06 100644 --- a/Documentation/usb/gadget-testing.rst +++ b/Documentation/usb/gadget-testing.rst @@ -206,6 +206,14 @@ the standard procedure for using FunctionFS (mount it, run the userspace process which implements the function proper). The gadget should be enabled by writing a suitable string to usb_gadget/<gadget>/UDC. +The FFS function provides just one attribute in its function directory: + + ready + +The attribute is read-only and signals if the function is ready (1) to be +used, E.G. if userspace has written descriptors and strings to ep0, so +the gadget can be enabled. + Testing the FFS function ------------------------ diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi index ddbaf7280b030..11158c2bd5241 100644 --- a/arch/arm64/boot/dts/qcom/pm6150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi @@ -63,6 +63,52 @@ }; }; + pm6150_vbus: usb-vbus-regulator@1100 { + compatible = "qcom,pm6150-vbus-reg, + qcom,pm8150b-vbus-reg"; + reg = <0x1100>; + status = "disabled"; + }; + + pm6150_typec: typec@1500 { + compatible = "qcom,pm6150-typec, + qcom,pm8150b-typec"; + reg = <0x1500>, <0x1700>; + interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>, + <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x00 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x01 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x02 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x03 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x04 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x05 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x06 IRQ_TYPE_EDGE_RISING>, + <0x0 0x17 0x07 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "or-rid-detect-change", + "vpd-detect", + "cc-state-change", + "vconn-oc", + "vbus-change", + "attach-detach", + "legacy-cable-detect", + "try-snk-src-detect", + "sig-tx", + "sig-rx", + "msg-tx", + "msg-rx", + "msg-tx-failed", + "msg-tx-discarded", + "msg-rx-discarded", + "fr-swap"; + status = "disabled"; + }; + pm6150_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts index df18f8dc46428..343326c303802 100644 --- a/arch/powerpc/boot/dts/akebono.dts +++ b/arch/powerpc/boot/dts/akebono.dts @@ -126,7 +126,7 @@ interrupts = <93 2>; }; - EHCI0: ehci@30010000000 { + EHCI0: usb@30010000000 { compatible = "ibm,476gtr-ehci", "generic-ehci"; reg = <0x300 0x10000000 0x0 0x10000>; interrupt-parent = <&MPIC>; @@ -140,14 +140,14 @@ interrupt-parent = <&MPIC>; }; - OHCI0: ohci@30010010000 { + OHCI0: usb@30010010000 { compatible = "ibm,476gtr-ohci", "generic-ohci"; reg = <0x300 0x10010000 0x0 0x10000>; interrupt-parent = <&MPIC>; interrupts = <89 1>; }; - OHCI1: ohci@30010020000 { + OHCI1: usb@30010020000 { compatible = "ibm,476gtr-ohci", "generic-ohci"; reg = <0x300 0x10020000 0x0 0x10000>; interrupt-parent = <&MPIC>; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 4cef568231bf0..787354b849c75 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -87,6 +87,7 @@ source "drivers/phy/motorola/Kconfig" source "drivers/phy/mscc/Kconfig" source "drivers/phy/qualcomm/Kconfig" source "drivers/phy/ralink/Kconfig" +source "drivers/phy/realtek/Kconfig" source "drivers/phy/renesas/Kconfig" source "drivers/phy/rockchip/Kconfig" source "drivers/phy/samsung/Kconfig" diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index fb3dc9de61115..868a220ed0f6d 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -26,6 +26,7 @@ obj-y += allwinner/ \ mscc/ \ qualcomm/ \ ralink/ \ + realtek/ \ renesas/ \ rockchip/ \ samsung/ \ diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 7f9b4de772eed..c5c8d70bc8533 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -490,6 +490,53 @@ int phy_calibrate(struct phy *phy) EXPORT_SYMBOL_GPL(phy_calibrate); /** + * phy_notify_connect() - phy connect notification + * @phy: the phy returned by phy_get() + * @port: the port index for connect + * + * If the phy needs to get connection status, the callback can be used. + * Returns: %0 if successful, a negative error code otherwise + */ +int phy_notify_connect(struct phy *phy, int port) +{ + int ret; + + if (!phy || !phy->ops->connect) + return 0; + + mutex_lock(&phy->mutex); + ret = phy->ops->connect(phy, port); + mutex_unlock(&phy->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_notify_connect); + +/** + * phy_notify_disconnect() - phy disconnect notification + * @phy: the phy returned by phy_get() + * @port: the port index for disconnect + * + * If the phy needs to get connection status, the callback can be used. + * + * Returns: %0 if successful, a negative error code otherwise + */ +int phy_notify_disconnect(struct phy *phy, int port) +{ + int ret; + + if (!phy || !phy->ops->disconnect) + return 0; + + mutex_lock(&phy->mutex); + ret = phy->ops->disconnect(phy, port); + mutex_unlock(&phy->mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(phy_notify_disconnect); + +/** * phy_configure() - Changes the phy parameters * @phy: the phy returned by phy_get() * @opts: New configuration to apply diff --git a/drivers/phy/realtek/Kconfig b/drivers/phy/realtek/Kconfig new file mode 100644 index 0000000000000..75ac7e7c31aec --- /dev/null +++ b/drivers/phy/realtek/Kconfig @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Phy drivers for Realtek platforms +# + +if ARCH_REALTEK || COMPILE_TEST + +config PHY_RTK_RTD_USB2PHY + tristate "Realtek RTD USB2 PHY Transceiver Driver" + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + select USB_COMMON + help + Enable this to support Realtek SoC USB2 phy transceiver. + The DHC (digital home center) RTD series SoCs used the Synopsys + DWC3 USB IP. This driver will do the PHY initialization + of the parameters. + +config PHY_RTK_RTD_USB3PHY + tristate "Realtek RTD USB3 PHY Transceiver Driver" + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + select USB_COMMON + help + Enable this to support Realtek SoC USB3 phy transceiver. + The DHC (digital home center) RTD series SoCs used the Synopsys + DWC3 USB IP. This driver will do the PHY initialization + of the parameters. + +endif # ARCH_REALTEK || COMPILE_TEST diff --git a/drivers/phy/realtek/Makefile b/drivers/phy/realtek/Makefile new file mode 100644 index 0000000000000..ed7b47ff8a268 --- /dev/null +++ b/drivers/phy/realtek/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-$(CONFIG_PHY_RTK_RTD_USB2PHY) += phy-rtk-usb2.o +obj-$(CONFIG_PHY_RTK_RTD_USB3PHY) += phy-rtk-usb3.o diff --git a/drivers/phy/realtek/phy-rtk-usb2.c b/drivers/phy/realtek/phy-rtk-usb2.c new file mode 100644 index 0000000000000..e3ad7cea51099 --- /dev/null +++ b/drivers/phy/realtek/phy-rtk-usb2.c @@ -0,0 +1,1312 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * phy-rtk-usb2.c RTK usb2.0 PHY driver + * + * Copyright (C) 2023 Realtek Semiconductor Corporation + * + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/debugfs.h> +#include <linux/nvmem-consumer.h> +#include <linux/regmap.h> +#include <linux/sys_soc.h> +#include <linux/mfd/syscon.h> +#include <linux/phy/phy.h> +#include <linux/usb.h> + +/* GUSB2PHYACCn register */ +#define PHY_NEW_REG_REQ BIT(25) +#define PHY_VSTS_BUSY BIT(23) +#define PHY_VCTRL_SHIFT 8 +#define PHY_REG_DATA_MASK 0xff + +#define GET_LOW_NIBBLE(addr) ((addr) & 0x0f) +#define GET_HIGH_NIBBLE(addr) (((addr) & 0xf0) >> 4) + +#define EFUS_USB_DC_CAL_RATE 2 +#define EFUS_USB_DC_CAL_MAX 7 + +#define EFUS_USB_DC_DIS_RATE 1 +#define EFUS_USB_DC_DIS_MAX 7 + +#define MAX_PHY_DATA_SIZE 20 +#define OFFEST_PHY_READ 0x20 + +#define MAX_USB_PHY_NUM 4 +#define MAX_USB_PHY_PAGE0_DATA_SIZE 16 +#define MAX_USB_PHY_PAGE1_DATA_SIZE 16 +#define MAX_USB_PHY_PAGE2_DATA_SIZE 8 + +#define SET_PAGE_OFFSET 0xf4 +#define SET_PAGE_0 0x9b +#define SET_PAGE_1 0xbb +#define SET_PAGE_2 0xdb + +#define PAGE_START 0xe0 +#define PAGE0_0XE4 0xe4 +#define PAGE0_0XE6 0xe6 +#define PAGE0_0XE7 0xe7 +#define PAGE1_0XE0 0xe0 +#define PAGE1_0XE2 0xe2 + +#define SENSITIVITY_CTRL (BIT(4) | BIT(5) | BIT(6)) +#define ENABLE_AUTO_SENSITIVITY_CALIBRATION BIT(2) +#define DEFAULT_DC_DRIVING_VALUE (0x8) +#define DEFAULT_DC_DISCONNECTION_VALUE (0x6) +#define HS_CLK_SELECT BIT(6) + +struct phy_reg { + void __iomem *reg_wrap_vstatus; + void __iomem *reg_gusb2phyacc0; + int vstatus_index; +}; + +struct phy_data { + u8 addr; + u8 data; +}; + +struct phy_cfg { + int page0_size; + struct phy_data page0[MAX_USB_PHY_PAGE0_DATA_SIZE]; + int page1_size; + struct phy_data page1[MAX_USB_PHY_PAGE1_DATA_SIZE]; + int page2_size; + struct phy_data page2[MAX_USB_PHY_PAGE2_DATA_SIZE]; + + int num_phy; + + bool check_efuse; + int check_efuse_version; +#define CHECK_EFUSE_V1 1 +#define CHECK_EFUSE_V2 2 + int efuse_dc_driving_rate; + int efuse_dc_disconnect_rate; + int dc_driving_mask; + int dc_disconnect_mask; + bool usb_dc_disconnect_at_page0; + int driving_updated_for_dev_dis; + + bool do_toggle; + bool do_toggle_driving; + bool use_default_parameter; + bool is_double_sensitivity_mode; +}; + +struct phy_parameter { + struct phy_reg phy_reg; + + /* Get from efuse */ + s8 efuse_usb_dc_cal; + s8 efuse_usb_dc_dis; + + /* Get from dts */ + bool inverse_hstx_sync_clock; + u32 driving_level; + s32 driving_level_compensate; + s32 disconnection_compensate; +}; + +struct rtk_phy { + struct device *dev; + + struct phy_cfg *phy_cfg; + int num_phy; + struct phy_parameter *phy_parameter; + + struct dentry *debug_dir; +}; + +/* mapping 0xE0 to 0 ... 0xE7 to 7, 0xF0 to 8 ,,, 0xF7 to 15 */ +static inline int page_addr_to_array_index(u8 addr) +{ + return (int)((((addr) - PAGE_START) & 0x7) + + ((((addr) - PAGE_START) & 0x10) >> 1)); +} + +static inline u8 array_index_to_page_addr(int index) +{ + return ((((index) + PAGE_START) & 0x7) + + ((((index) & 0x8) << 1) + PAGE_START)); +} + +#define PHY_IO_TIMEOUT_USEC (50000) +#define PHY_IO_DELAY_US (100) + +static inline int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) +{ + int ret; + unsigned int val; + + ret = read_poll_timeout(readl, val, ((val & mask) == result), + PHY_IO_DELAY_US, PHY_IO_TIMEOUT_USEC, false, reg); + if (ret) { + pr_err("%s can't program USB phy\n", __func__); + return -ETIMEDOUT; + } + + return 0; +} + +static char rtk_phy_read(struct phy_reg *phy_reg, char addr) +{ + void __iomem *reg_gusb2phyacc0 = phy_reg->reg_gusb2phyacc0; + unsigned int val; + int ret = 0; + + addr -= OFFEST_PHY_READ; + + /* polling until VBusy == 0 */ + ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); + if (ret) + return (char)ret; + + /* VCtrl = low nibble of addr, and set PHY_NEW_REG_REQ */ + val = PHY_NEW_REG_REQ | (GET_LOW_NIBBLE(addr) << PHY_VCTRL_SHIFT); + writel(val, reg_gusb2phyacc0); + ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); + if (ret) + return (char)ret; + + /* VCtrl = high nibble of addr, and set PHY_NEW_REG_REQ */ + val = PHY_NEW_REG_REQ | (GET_HIGH_NIBBLE(addr) << PHY_VCTRL_SHIFT); + writel(val, reg_gusb2phyacc0); + ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); + if (ret) + return (char)ret; + + val = readl(reg_gusb2phyacc0); + + return (char)(val & PHY_REG_DATA_MASK); +} + +static int rtk_phy_write(struct phy_reg *phy_reg, char addr, char data) +{ + unsigned int val; + void __iomem *reg_wrap_vstatus = phy_reg->reg_wrap_vstatus; + void __iomem *reg_gusb2phyacc0 = phy_reg->reg_gusb2phyacc0; + int shift_bits = phy_reg->vstatus_index * 8; + int ret = 0; + + /* write data to VStatusOut2 (data output to phy) */ + writel((u32)data << shift_bits, reg_wrap_vstatus); + + ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); + if (ret) + return ret; + + /* VCtrl = low nibble of addr, set PHY_NEW_REG_REQ */ + val = PHY_NEW_REG_REQ | (GET_LOW_NIBBLE(addr) << PHY_VCTRL_SHIFT); + + writel(val, reg_gusb2phyacc0); + ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); + if (ret) + return ret; + + /* VCtrl = high nibble of addr, set PHY_NEW_REG_REQ */ + val = PHY_NEW_REG_REQ | (GET_HIGH_NIBBLE(addr) << PHY_VCTRL_SHIFT); + + writel(val, reg_gusb2phyacc0); + ret = utmi_wait_register(reg_gusb2phyacc0, PHY_VSTS_BUSY, 0); + if (ret) + return ret; + + return 0; +} + +static int rtk_phy_set_page(struct phy_reg *phy_reg, int page) +{ + switch (page) { + case 0: + return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_0); + case 1: + return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_1); + case 2: + return rtk_phy_write(phy_reg, SET_PAGE_OFFSET, SET_PAGE_2); + default: + pr_err("%s error page=%d\n", __func__, page); + } + + return -EINVAL; +} + +static u8 __updated_dc_disconnect_level_page0_0xe4(struct phy_cfg *phy_cfg, + struct phy_parameter *phy_parameter, u8 data) +{ + u8 ret; + s32 val; + s32 dc_disconnect_mask = phy_cfg->dc_disconnect_mask; + int offset = 4; + + val = (s32)((data >> offset) & dc_disconnect_mask) + + phy_parameter->efuse_usb_dc_dis + + phy_parameter->disconnection_compensate; + + if (val > dc_disconnect_mask) + val = dc_disconnect_mask; + else if (val < 0) + val = 0; + + ret = (data & (~(dc_disconnect_mask << offset))) | + (val & dc_disconnect_mask) << offset; + + return ret; +} + +/* updated disconnect level at page0 */ +static void update_dc_disconnect_level_at_page0(struct rtk_phy *rtk_phy, + struct phy_parameter *phy_parameter, bool update) +{ + struct phy_cfg *phy_cfg; + struct phy_reg *phy_reg; + struct phy_data *phy_data_page; + struct phy_data *phy_data; + u8 addr, data; + int offset = 4; + s32 dc_disconnect_mask; + int i; + + phy_cfg = rtk_phy->phy_cfg; + phy_reg = &phy_parameter->phy_reg; + + /* Set page 0 */ + phy_data_page = phy_cfg->page0; + rtk_phy_set_page(phy_reg, 0); + + i = page_addr_to_array_index(PAGE0_0XE4); + phy_data = phy_data_page + i; + if (!phy_data->addr) { + phy_data->addr = PAGE0_0XE4; + phy_data->data = rtk_phy_read(phy_reg, PAGE0_0XE4); + } + + addr = phy_data->addr; + data = phy_data->data; + dc_disconnect_mask = phy_cfg->dc_disconnect_mask; + + if (update) + data = __updated_dc_disconnect_level_page0_0xe4(phy_cfg, phy_parameter, data); + else + data = (data & ~(dc_disconnect_mask << offset)) | + (DEFAULT_DC_DISCONNECTION_VALUE << offset); + + if (rtk_phy_write(phy_reg, addr, data)) + dev_err(rtk_phy->dev, + "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", + __func__, addr, data); +} + +static u8 __updated_dc_disconnect_level_page1_0xe2(struct phy_cfg *phy_cfg, + struct phy_parameter *phy_parameter, u8 data) +{ + u8 ret; + s32 val; + s32 dc_disconnect_mask = phy_cfg->dc_disconnect_mask; + + if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { + val = (s32)(data & dc_disconnect_mask) + + phy_parameter->efuse_usb_dc_dis + + phy_parameter->disconnection_compensate; + } else { /* for CHECK_EFUSE_V2 or no efuse */ + if (phy_parameter->efuse_usb_dc_dis) + val = (s32)(phy_parameter->efuse_usb_dc_dis + + phy_parameter->disconnection_compensate); + else + val = (s32)((data & dc_disconnect_mask) + + phy_parameter->disconnection_compensate); + } + + if (val > dc_disconnect_mask) + val = dc_disconnect_mask; + else if (val < 0) + val = 0; + + ret = (data & (~dc_disconnect_mask)) | (val & dc_disconnect_mask); + + return ret; +} + +/* updated disconnect level at page1 */ +static void update_dc_disconnect_level_at_page1(struct rtk_phy *rtk_phy, + struct phy_parameter *phy_parameter, bool update) +{ + struct phy_cfg *phy_cfg; + struct phy_data *phy_data_page; + struct phy_data *phy_data; + struct phy_reg *phy_reg; + u8 addr, data; + s32 dc_disconnect_mask; + int i; + + phy_cfg = rtk_phy->phy_cfg; + phy_reg = &phy_parameter->phy_reg; + + /* Set page 1 */ + phy_data_page = phy_cfg->page1; + rtk_phy_set_page(phy_reg, 1); + + i = page_addr_to_array_index(PAGE1_0XE2); + phy_data = phy_data_page + i; + if (!phy_data->addr) { + phy_data->addr = PAGE1_0XE2; + phy_data->data = rtk_phy_read(phy_reg, PAGE1_0XE2); + } + + addr = phy_data->addr; + data = phy_data->data; + dc_disconnect_mask = phy_cfg->dc_disconnect_mask; + + if (update) + data = __updated_dc_disconnect_level_page1_0xe2(phy_cfg, phy_parameter, data); + else + data = (data & ~dc_disconnect_mask) | DEFAULT_DC_DISCONNECTION_VALUE; + + if (rtk_phy_write(phy_reg, addr, data)) + dev_err(rtk_phy->dev, + "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", + __func__, addr, data); +} + +static void update_dc_disconnect_level(struct rtk_phy *rtk_phy, + struct phy_parameter *phy_parameter, bool update) +{ + struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; + + if (phy_cfg->usb_dc_disconnect_at_page0) + update_dc_disconnect_level_at_page0(rtk_phy, phy_parameter, update); + else + update_dc_disconnect_level_at_page1(rtk_phy, phy_parameter, update); +} + +static u8 __update_dc_driving_page0_0xe4(struct phy_cfg *phy_cfg, + struct phy_parameter *phy_parameter, u8 data) +{ + s32 driving_level_compensate = phy_parameter->driving_level_compensate; + s32 dc_driving_mask = phy_cfg->dc_driving_mask; + s32 val; + u8 ret; + + if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { + val = (s32)(data & dc_driving_mask) + driving_level_compensate + + phy_parameter->efuse_usb_dc_cal; + } else { /* for CHECK_EFUSE_V2 or no efuse */ + if (phy_parameter->efuse_usb_dc_cal) + val = (s32)((phy_parameter->efuse_usb_dc_cal & dc_driving_mask) + + driving_level_compensate); + else + val = (s32)(data & dc_driving_mask); + } + + if (val > dc_driving_mask) + val = dc_driving_mask; + else if (val < 0) + val = 0; + + ret = (data & (~dc_driving_mask)) | (val & dc_driving_mask); + + return ret; +} + +static void update_dc_driving_level(struct rtk_phy *rtk_phy, + struct phy_parameter *phy_parameter) +{ + struct phy_cfg *phy_cfg; + struct phy_reg *phy_reg; + + phy_reg = &phy_parameter->phy_reg; + phy_cfg = rtk_phy->phy_cfg; + if (!phy_cfg->page0[4].addr) { + rtk_phy_set_page(phy_reg, 0); + phy_cfg->page0[4].addr = PAGE0_0XE4; + phy_cfg->page0[4].data = rtk_phy_read(phy_reg, PAGE0_0XE4); + } + + if (phy_parameter->driving_level != DEFAULT_DC_DRIVING_VALUE) { + u32 dc_driving_mask; + u8 driving_level; + u8 data; + + data = phy_cfg->page0[4].data; + dc_driving_mask = phy_cfg->dc_driving_mask; + driving_level = data & dc_driving_mask; + + dev_dbg(rtk_phy->dev, "%s driving_level=%d => dts driving_level=%d\n", + __func__, driving_level, phy_parameter->driving_level); + + phy_cfg->page0[4].data = (data & (~dc_driving_mask)) | + (phy_parameter->driving_level & dc_driving_mask); + } + + phy_cfg->page0[4].data = __update_dc_driving_page0_0xe4(phy_cfg, + phy_parameter, + phy_cfg->page0[4].data); +} + +static void update_hs_clk_select(struct rtk_phy *rtk_phy, + struct phy_parameter *phy_parameter) +{ + struct phy_cfg *phy_cfg; + struct phy_reg *phy_reg; + + phy_cfg = rtk_phy->phy_cfg; + phy_reg = &phy_parameter->phy_reg; + + if (phy_parameter->inverse_hstx_sync_clock) { + if (!phy_cfg->page0[6].addr) { + rtk_phy_set_page(phy_reg, 0); + phy_cfg->page0[6].addr = PAGE0_0XE6; + phy_cfg->page0[6].data = rtk_phy_read(phy_reg, PAGE0_0XE6); + } + + phy_cfg->page0[6].data = phy_cfg->page0[6].data | HS_CLK_SELECT; + } +} + +static void do_rtk_phy_toggle(struct rtk_phy *rtk_phy, + int index, bool connect) +{ + struct phy_parameter *phy_parameter; + struct phy_cfg *phy_cfg; + struct phy_reg *phy_reg; + struct phy_data *phy_data_page; + u8 addr, data; + int i; + + phy_cfg = rtk_phy->phy_cfg; + phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; + phy_reg = &phy_parameter->phy_reg; + + if (!phy_cfg->do_toggle) + goto out; + + if (phy_cfg->is_double_sensitivity_mode) + goto do_toggle_driving; + + /* Set page 0 */ + rtk_phy_set_page(phy_reg, 0); + + addr = PAGE0_0XE7; + data = rtk_phy_read(phy_reg, addr); + + if (connect) + rtk_phy_write(phy_reg, addr, data & (~SENSITIVITY_CTRL)); + else + rtk_phy_write(phy_reg, addr, data | (SENSITIVITY_CTRL)); + +do_toggle_driving: + + if (!phy_cfg->do_toggle_driving) + goto do_toggle; + + /* Page 0 addr 0xE4 driving capability */ + + /* Set page 0 */ + phy_data_page = phy_cfg->page0; + rtk_phy_set_page(phy_reg, 0); + + i = page_addr_to_array_index(PAGE0_0XE4); + addr = phy_data_page[i].addr; + data = phy_data_page[i].data; + + if (connect) { + rtk_phy_write(phy_reg, addr, data); + } else { + u8 value; + s32 tmp; + s32 driving_updated = + phy_cfg->driving_updated_for_dev_dis; + s32 dc_driving_mask = phy_cfg->dc_driving_mask; + + tmp = (s32)(data & dc_driving_mask) + driving_updated; + + if (tmp > dc_driving_mask) + tmp = dc_driving_mask; + else if (tmp < 0) + tmp = 0; + + value = (data & (~dc_driving_mask)) | (tmp & dc_driving_mask); + + rtk_phy_write(phy_reg, addr, value); + } + +do_toggle: + /* restore dc disconnect level before toggle */ + update_dc_disconnect_level(rtk_phy, phy_parameter, false); + + /* Set page 1 */ + rtk_phy_set_page(phy_reg, 1); + + addr = PAGE1_0XE0; + data = rtk_phy_read(phy_reg, addr); + + rtk_phy_write(phy_reg, addr, data & + (~ENABLE_AUTO_SENSITIVITY_CALIBRATION)); + mdelay(1); + rtk_phy_write(phy_reg, addr, data | + (ENABLE_AUTO_SENSITIVITY_CALIBRATION)); + + /* update dc disconnect level after toggle */ + update_dc_disconnect_level(rtk_phy, phy_parameter, true); + +out: + return; +} + +static int do_rtk_phy_init(struct rtk_phy *rtk_phy, int index) +{ + struct phy_parameter *phy_parameter; + struct phy_cfg *phy_cfg; + struct phy_data *phy_data_page; + struct phy_reg *phy_reg; + int i; + + phy_cfg = rtk_phy->phy_cfg; + phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; + phy_reg = &phy_parameter->phy_reg; + + if (phy_cfg->use_default_parameter) { + dev_dbg(rtk_phy->dev, "%s phy#%d use default parameter\n", + __func__, index); + goto do_toggle; + } + + /* Set page 0 */ + phy_data_page = phy_cfg->page0; + rtk_phy_set_page(phy_reg, 0); + + for (i = 0; i < phy_cfg->page0_size; i++) { + struct phy_data *phy_data = phy_data_page + i; + u8 addr = phy_data->addr; + u8 data = phy_data->data; + + if (!addr) + continue; + + if (rtk_phy_write(phy_reg, addr, data)) { + dev_err(rtk_phy->dev, + "%s: Error to set page0 parameter addr=0x%x value=0x%x\n", + __func__, addr, data); + return -EINVAL; + } + } + + /* Set page 1 */ + phy_data_page = phy_cfg->page1; + rtk_phy_set_page(phy_reg, 1); + + for (i = 0; i < phy_cfg->page1_size; i++) { + struct phy_data *phy_data = phy_data_page + i; + u8 addr = phy_data->addr; + u8 data = phy_data->data; + + if (!addr) + continue; + + if (rtk_phy_write(phy_reg, addr, data)) { + dev_err(rtk_phy->dev, + "%s: Error to set page1 parameter addr=0x%x value=0x%x\n", + __func__, addr, data); + return -EINVAL; + } + } + + if (phy_cfg->page2_size == 0) + goto do_toggle; + + /* Set page 2 */ + phy_data_page = phy_cfg->page2; + rtk_phy_set_page(phy_reg, 2); + + for (i = 0; i < phy_cfg->page2_size; i++) { + struct phy_data *phy_data = phy_data_page + i; + u8 addr = phy_data->addr; + u8 data = phy_data->data; + + if (!addr) + continue; + + if (rtk_phy_write(phy_reg, addr, data)) { + dev_err(rtk_phy->dev, + "%s: Error to set page2 parameter addr=0x%x value=0x%x\n", + __func__, addr, data); + return -EINVAL; + } + } + +do_toggle: + do_rtk_phy_toggle(rtk_phy, index, false); + + return 0; +} + +static int rtk_phy_init(struct phy *phy) +{ + struct rtk_phy *rtk_phy = phy_get_drvdata(phy); + unsigned long phy_init_time = jiffies; + int i, ret = 0; + + if (!rtk_phy) + return -EINVAL; + + for (i = 0; i < rtk_phy->num_phy; i++) + ret = do_rtk_phy_init(rtk_phy, i); + + dev_dbg(rtk_phy->dev, "Initialized RTK USB 2.0 PHY (take %dms)\n", + jiffies_to_msecs(jiffies - phy_init_time)); + return ret; +} + +static int rtk_phy_exit(struct phy *phy) +{ + return 0; +} + +static void rtk_phy_toggle(struct rtk_phy *rtk_phy, bool connect, int port) +{ + int index = port; + + if (index > rtk_phy->num_phy) { + dev_err(rtk_phy->dev, "%s: The port=%d is not in usb phy (num_phy=%d)\n", + __func__, index, rtk_phy->num_phy); + return; + } + + do_rtk_phy_toggle(rtk_phy, index, connect); +} + +static int rtk_phy_connect(struct phy *phy, int port) +{ + struct rtk_phy *rtk_phy = phy_get_drvdata(phy); + + dev_dbg(rtk_phy->dev, "%s port=%d\n", __func__, port); + rtk_phy_toggle(rtk_phy, true, port); + + return 0; +} + +static int rtk_phy_disconnect(struct phy *phy, int port) +{ + struct rtk_phy *rtk_phy = phy_get_drvdata(phy); + + dev_dbg(rtk_phy->dev, "%s port=%d\n", __func__, port); + rtk_phy_toggle(rtk_phy, false, port); + + return 0; +} + +static const struct phy_ops ops = { + .init = rtk_phy_init, + .exit = rtk_phy_exit, + .connect = rtk_phy_connect, + .disconnect = rtk_phy_disconnect, + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_DEBUG_FS +static struct dentry *create_phy_debug_root(void) +{ + struct dentry *phy_debug_root; + + phy_debug_root = debugfs_lookup("phy", usb_debug_root); + if (!phy_debug_root) + phy_debug_root = debugfs_create_dir("phy", usb_debug_root); + + return phy_debug_root; +} + +static int rtk_usb2_parameter_show(struct seq_file *s, void *unused) +{ + struct rtk_phy *rtk_phy = s->private; + struct phy_cfg *phy_cfg; + int i, index; + + phy_cfg = rtk_phy->phy_cfg; + + seq_puts(s, "Property:\n"); + seq_printf(s, " check_efuse: %s\n", + phy_cfg->check_efuse ? "Enable" : "Disable"); + seq_printf(s, " check_efuse_version: %d\n", + phy_cfg->check_efuse_version); + seq_printf(s, " efuse_dc_driving_rate: %d\n", + phy_cfg->efuse_dc_driving_rate); + seq_printf(s, " dc_driving_mask: 0x%x\n", + phy_cfg->dc_driving_mask); + seq_printf(s, " efuse_dc_disconnect_rate: %d\n", + phy_cfg->efuse_dc_disconnect_rate); + seq_printf(s, " dc_disconnect_mask: 0x%x\n", + phy_cfg->dc_disconnect_mask); + seq_printf(s, " usb_dc_disconnect_at_page0: %s\n", + phy_cfg->usb_dc_disconnect_at_page0 ? "true" : "false"); + seq_printf(s, " do_toggle: %s\n", + phy_cfg->do_toggle ? "Enable" : "Disable"); + seq_printf(s, " do_toggle_driving: %s\n", + phy_cfg->do_toggle_driving ? "Enable" : "Disable"); + seq_printf(s, " driving_updated_for_dev_dis: 0x%x\n", + phy_cfg->driving_updated_for_dev_dis); + seq_printf(s, " use_default_parameter: %s\n", + phy_cfg->use_default_parameter ? "Enable" : "Disable"); + seq_printf(s, " is_double_sensitivity_mode: %s\n", + phy_cfg->is_double_sensitivity_mode ? "Enable" : "Disable"); + + for (index = 0; index < rtk_phy->num_phy; index++) { + struct phy_parameter *phy_parameter; + struct phy_reg *phy_reg; + struct phy_data *phy_data_page; + + phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; + phy_reg = &phy_parameter->phy_reg; + + seq_printf(s, "PHY %d:\n", index); + + seq_puts(s, "Page 0:\n"); + /* Set page 0 */ + phy_data_page = phy_cfg->page0; + rtk_phy_set_page(phy_reg, 0); + + for (i = 0; i < phy_cfg->page0_size; i++) { + struct phy_data *phy_data = phy_data_page + i; + u8 addr = array_index_to_page_addr(i); + u8 data = phy_data->data; + u8 value = rtk_phy_read(phy_reg, addr); + + if (phy_data->addr) + seq_printf(s, " Page 0: addr=0x%x data=0x%02x ==> read value=0x%02x\n", + addr, data, value); + else + seq_printf(s, " Page 0: addr=0x%x data=none ==> read value=0x%02x\n", + addr, value); + } + + seq_puts(s, "Page 1:\n"); + /* Set page 1 */ + phy_data_page = phy_cfg->page1; + rtk_phy_set_page(phy_reg, 1); + + for (i = 0; i < phy_cfg->page1_size; i++) { + struct phy_data *phy_data = phy_data_page + i; + u8 addr = array_index_to_page_addr(i); + u8 data = phy_data->data; + u8 value = rtk_phy_read(phy_reg, addr); + + if (phy_data->addr) + seq_printf(s, " Page 1: addr=0x%x data=0x%02x ==> read value=0x%02x\n", + addr, data, value); + else + seq_printf(s, " Page 1: addr=0x%x data=none ==> read value=0x%02x\n", + addr, value); + } + + if (phy_cfg->page2_size == 0) + goto out; + + seq_puts(s, "Page 2:\n"); + /* Set page 2 */ + phy_data_page = phy_cfg->page2; + rtk_phy_set_page(phy_reg, 2); + + for (i = 0; i < phy_cfg->page2_size; i++) { + struct phy_data *phy_data = phy_data_page + i; + u8 addr = array_index_to_page_addr(i); + u8 data = phy_data->data; + u8 value = rtk_phy_read(phy_reg, addr); + + if (phy_data->addr) + seq_printf(s, " Page 2: addr=0x%x data=0x%02x ==> read value=0x%02x\n", + addr, data, value); + else + seq_printf(s, " Page 2: addr=0x%x data=none ==> read value=0x%02x\n", + addr, value); + } + +out: + seq_puts(s, "PHY Property:\n"); + seq_printf(s, " efuse_usb_dc_cal: %d\n", + (int)phy_parameter->efuse_usb_dc_cal); + seq_printf(s, " efuse_usb_dc_dis: %d\n", + (int)phy_parameter->efuse_usb_dc_dis); + seq_printf(s, " inverse_hstx_sync_clock: %s\n", + phy_parameter->inverse_hstx_sync_clock ? "Enable" : "Disable"); + seq_printf(s, " driving_level: %d\n", + phy_parameter->driving_level); + seq_printf(s, " driving_level_compensate: %d\n", + phy_parameter->driving_level_compensate); + seq_printf(s, " disconnection_compensate: %d\n", + phy_parameter->disconnection_compensate); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(rtk_usb2_parameter); + +static inline void create_debug_files(struct rtk_phy *rtk_phy) +{ + struct dentry *phy_debug_root = NULL; + + phy_debug_root = create_phy_debug_root(); + if (!phy_debug_root) + return; + + rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), + phy_debug_root); + + debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, + &rtk_usb2_parameter_fops); +} + +static inline void remove_debug_files(struct rtk_phy *rtk_phy) +{ + debugfs_remove_recursive(rtk_phy->debug_dir); +} +#else +static inline void create_debug_files(struct rtk_phy *rtk_phy) { } +static inline void remove_debug_files(struct rtk_phy *rtk_phy) { } +#endif /* CONFIG_DEBUG_FS */ + +static int get_phy_data_by_efuse(struct rtk_phy *rtk_phy, + struct phy_parameter *phy_parameter, int index) +{ + struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; + u8 value = 0; + struct nvmem_cell *cell; + struct soc_device_attribute rtk_soc_groot[] = { + { .family = "Realtek Groot",}, + { /* empty */ } }; + + if (!phy_cfg->check_efuse) + goto out; + + /* Read efuse for usb dc cal */ + cell = nvmem_cell_get(rtk_phy->dev, "usb-dc-cal"); + if (IS_ERR(cell)) { + dev_dbg(rtk_phy->dev, "%s no usb-dc-cal: %ld\n", + __func__, PTR_ERR(cell)); + } else { + unsigned char *buf; + size_t buf_size; + + buf = nvmem_cell_read(cell, &buf_size); + if (!IS_ERR(buf)) { + value = buf[0] & phy_cfg->dc_driving_mask; + kfree(buf); + } + nvmem_cell_put(cell); + } + + if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { + int rate = phy_cfg->efuse_dc_driving_rate; + + if (value <= EFUS_USB_DC_CAL_MAX) + phy_parameter->efuse_usb_dc_cal = (int8_t)(value * rate); + else + phy_parameter->efuse_usb_dc_cal = -(int8_t) + ((EFUS_USB_DC_CAL_MAX & value) * rate); + + if (soc_device_match(rtk_soc_groot)) { + dev_dbg(rtk_phy->dev, "For groot IC we need a workaround to adjust efuse_usb_dc_cal\n"); + + /* We don't multiple dc_cal_rate=2 for positive dc cal compensate */ + if (value <= EFUS_USB_DC_CAL_MAX) + phy_parameter->efuse_usb_dc_cal = (int8_t)(value); + + /* We set max dc cal compensate is 0x8 if otp is 0x7 */ + if (value == 0x7) + phy_parameter->efuse_usb_dc_cal = (int8_t)(value + 1); + } + } else { /* for CHECK_EFUSE_V2 */ + phy_parameter->efuse_usb_dc_cal = value & phy_cfg->dc_driving_mask; + } + + /* Read efuse for usb dc disconnect level */ + value = 0; + cell = nvmem_cell_get(rtk_phy->dev, "usb-dc-dis"); + if (IS_ERR(cell)) { + dev_dbg(rtk_phy->dev, "%s no usb-dc-dis: %ld\n", + __func__, PTR_ERR(cell)); + } else { + unsigned char *buf; + size_t buf_size; + + buf = nvmem_cell_read(cell, &buf_size); + if (!IS_ERR(buf)) { + value = buf[0] & phy_cfg->dc_disconnect_mask; + kfree(buf); + } + nvmem_cell_put(cell); + } + + if (phy_cfg->check_efuse_version == CHECK_EFUSE_V1) { + int rate = phy_cfg->efuse_dc_disconnect_rate; + + if (value <= EFUS_USB_DC_DIS_MAX) + phy_parameter->efuse_usb_dc_dis = (int8_t)(value * rate); + else + phy_parameter->efuse_usb_dc_dis = -(int8_t) + ((EFUS_USB_DC_DIS_MAX & value) * rate); + } else { /* for CHECK_EFUSE_V2 */ + phy_parameter->efuse_usb_dc_dis = value & phy_cfg->dc_disconnect_mask; + } + +out: + return 0; +} + +static int parse_phy_data(struct rtk_phy *rtk_phy) +{ + struct device *dev = rtk_phy->dev; + struct device_node *np = dev->of_node; + struct phy_parameter *phy_parameter; + int ret = 0; + int index; + + rtk_phy->phy_parameter = devm_kzalloc(dev, sizeof(struct phy_parameter) * + rtk_phy->num_phy, GFP_KERNEL); + if (!rtk_phy->phy_parameter) + return -ENOMEM; + + for (index = 0; index < rtk_phy->num_phy; index++) { + phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; + + phy_parameter->phy_reg.reg_wrap_vstatus = of_iomap(np, 0); + phy_parameter->phy_reg.reg_gusb2phyacc0 = of_iomap(np, 1) + index; + phy_parameter->phy_reg.vstatus_index = index; + + if (of_property_read_bool(np, "realtek,inverse-hstx-sync-clock")) + phy_parameter->inverse_hstx_sync_clock = true; + else + phy_parameter->inverse_hstx_sync_clock = false; + + if (of_property_read_u32_index(np, "realtek,driving-level", + index, &phy_parameter->driving_level)) + phy_parameter->driving_level = DEFAULT_DC_DRIVING_VALUE; + + if (of_property_read_u32_index(np, "realtek,driving-level-compensate", + index, &phy_parameter->driving_level_compensate)) + phy_parameter->driving_level_compensate = 0; + + if (of_property_read_u32_index(np, "realtek,disconnection-compensate", + index, &phy_parameter->disconnection_compensate)) + phy_parameter->disconnection_compensate = 0; + + get_phy_data_by_efuse(rtk_phy, phy_parameter, index); + + update_dc_driving_level(rtk_phy, phy_parameter); + + update_hs_clk_select(rtk_phy, phy_parameter); + } + + return ret; +} + +static int rtk_usb2phy_probe(struct platform_device *pdev) +{ + struct rtk_phy *rtk_phy; + struct device *dev = &pdev->dev; + struct phy *generic_phy; + struct phy_provider *phy_provider; + const struct phy_cfg *phy_cfg; + int ret = 0; + + phy_cfg = of_device_get_match_data(dev); + if (!phy_cfg) { + dev_err(dev, "phy config are not assigned!\n"); + return -EINVAL; + } + + rtk_phy = devm_kzalloc(dev, sizeof(*rtk_phy), GFP_KERNEL); + if (!rtk_phy) + return -ENOMEM; + + rtk_phy->dev = &pdev->dev; + rtk_phy->phy_cfg = devm_kzalloc(dev, sizeof(*phy_cfg), GFP_KERNEL); + + memcpy(rtk_phy->phy_cfg, phy_cfg, sizeof(*phy_cfg)); + + rtk_phy->num_phy = phy_cfg->num_phy; + + ret = parse_phy_data(rtk_phy); + if (ret) + goto err; + + platform_set_drvdata(pdev, rtk_phy); + + generic_phy = devm_phy_create(rtk_phy->dev, NULL, &ops); + if (IS_ERR(generic_phy)) + return PTR_ERR(generic_phy); + + phy_set_drvdata(generic_phy, rtk_phy); + + phy_provider = devm_of_phy_provider_register(rtk_phy->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + create_debug_files(rtk_phy); + +err: + return ret; +} + +static void rtk_usb2phy_remove(struct platform_device *pdev) +{ + struct rtk_phy *rtk_phy = platform_get_drvdata(pdev); + + remove_debug_files(rtk_phy); +} + +static const struct phy_cfg rtd1295_phy_cfg = { + .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, + .page0 = { [0] = {0xe0, 0x90}, + [3] = {0xe3, 0x3a}, + [4] = {0xe4, 0x68}, + [6] = {0xe6, 0x91}, + [13] = {0xf5, 0x81}, + [15] = {0xf7, 0x02}, }, + .page1_size = 8, + .page1 = { /* default parameter */ }, + .page2_size = 0, + .page2 = { /* no parameter */ }, + .num_phy = 1, + .check_efuse = false, + .check_efuse_version = CHECK_EFUSE_V1, + .efuse_dc_driving_rate = 1, + .dc_driving_mask = 0xf, + .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, + .dc_disconnect_mask = 0xf, + .usb_dc_disconnect_at_page0 = true, + .do_toggle = true, + .do_toggle_driving = false, + .driving_updated_for_dev_dis = 0xf, + .use_default_parameter = false, + .is_double_sensitivity_mode = false, +}; + +static const struct phy_cfg rtd1395_phy_cfg = { + .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, + .page0 = { [4] = {0xe4, 0xac}, + [13] = {0xf5, 0x00}, + [15] = {0xf7, 0x02}, }, + .page1_size = 8, + .page1 = { /* default parameter */ }, + .page2_size = 0, + .page2 = { /* no parameter */ }, + .num_phy = 1, + .check_efuse = false, + .check_efuse_version = CHECK_EFUSE_V1, + .efuse_dc_driving_rate = 1, + .dc_driving_mask = 0xf, + .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, + .dc_disconnect_mask = 0xf, + .usb_dc_disconnect_at_page0 = true, + .do_toggle = true, + .do_toggle_driving = false, + .driving_updated_for_dev_dis = 0xf, + .use_default_parameter = false, + .is_double_sensitivity_mode = false, +}; + +static const struct phy_cfg rtd1395_phy_cfg_2port = { + .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, + .page0 = { [4] = {0xe4, 0xac}, + [13] = {0xf5, 0x00}, + [15] = {0xf7, 0x02}, }, + .page1_size = 8, + .page1 = { /* default parameter */ }, + .page2_size = 0, + .page2 = { /* no parameter */ }, + .num_phy = 2, + .check_efuse = false, + .check_efuse_version = CHECK_EFUSE_V1, + .efuse_dc_driving_rate = 1, + .dc_driving_mask = 0xf, + .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, + .dc_disconnect_mask = 0xf, + .usb_dc_disconnect_at_page0 = true, + .do_toggle = true, + .do_toggle_driving = false, + .driving_updated_for_dev_dis = 0xf, + .use_default_parameter = false, + .is_double_sensitivity_mode = false, +}; + +static const struct phy_cfg rtd1619_phy_cfg = { + .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, + .page0 = { [4] = {0xe4, 0x68}, }, + .page1_size = 8, + .page1 = { /* default parameter */ }, + .page2_size = 0, + .page2 = { /* no parameter */ }, + .num_phy = 1, + .check_efuse = true, + .check_efuse_version = CHECK_EFUSE_V1, + .efuse_dc_driving_rate = 1, + .dc_driving_mask = 0xf, + .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, + .dc_disconnect_mask = 0xf, + .usb_dc_disconnect_at_page0 = true, + .do_toggle = true, + .do_toggle_driving = false, + .driving_updated_for_dev_dis = 0xf, + .use_default_parameter = false, + .is_double_sensitivity_mode = false, +}; + +static const struct phy_cfg rtd1319_phy_cfg = { + .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, + .page0 = { [0] = {0xe0, 0x18}, + [4] = {0xe4, 0x6a}, + [7] = {0xe7, 0x71}, + [13] = {0xf5, 0x15}, + [15] = {0xf7, 0x32}, }, + .page1_size = 8, + .page1 = { [3] = {0xe3, 0x44}, }, + .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, + .page2 = { [0] = {0xe0, 0x01}, }, + .num_phy = 1, + .check_efuse = true, + .check_efuse_version = CHECK_EFUSE_V1, + .efuse_dc_driving_rate = 1, + .dc_driving_mask = 0xf, + .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, + .dc_disconnect_mask = 0xf, + .usb_dc_disconnect_at_page0 = true, + .do_toggle = true, + .do_toggle_driving = true, + .driving_updated_for_dev_dis = 0xf, + .use_default_parameter = false, + .is_double_sensitivity_mode = true, +}; + +static const struct phy_cfg rtd1312c_phy_cfg = { + .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, + .page0 = { [0] = {0xe0, 0x14}, + [4] = {0xe4, 0x67}, + [5] = {0xe5, 0x55}, }, + .page1_size = 8, + .page1 = { [3] = {0xe3, 0x23}, + [6] = {0xe6, 0x58}, }, + .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, + .page2 = { /* default parameter */ }, + .num_phy = 1, + .check_efuse = true, + .check_efuse_version = CHECK_EFUSE_V1, + .efuse_dc_driving_rate = 1, + .dc_driving_mask = 0xf, + .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, + .dc_disconnect_mask = 0xf, + .usb_dc_disconnect_at_page0 = true, + .do_toggle = true, + .do_toggle_driving = true, + .driving_updated_for_dev_dis = 0xf, + .use_default_parameter = false, + .is_double_sensitivity_mode = true, +}; + +static const struct phy_cfg rtd1619b_phy_cfg = { + .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, + .page0 = { [0] = {0xe0, 0xa3}, + [4] = {0xe4, 0xa8}, + [5] = {0xe5, 0x4f}, + [6] = {0xe6, 0x02}, }, + .page1_size = 8, + .page1 = { [3] = {0xe3, 0x64}, }, + .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, + .page2 = { [7] = {0xe7, 0x45}, }, + .num_phy = 1, + .check_efuse = true, + .check_efuse_version = CHECK_EFUSE_V1, + .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, + .dc_driving_mask = 0x1f, + .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, + .dc_disconnect_mask = 0xf, + .usb_dc_disconnect_at_page0 = false, + .do_toggle = true, + .do_toggle_driving = true, + .driving_updated_for_dev_dis = 0x8, + .use_default_parameter = false, + .is_double_sensitivity_mode = true, +}; + +static const struct phy_cfg rtd1319d_phy_cfg = { + .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, + .page0 = { [0] = {0xe0, 0xa3}, + [4] = {0xe4, 0x8e}, + [5] = {0xe5, 0x4f}, + [6] = {0xe6, 0x02}, }, + .page1_size = MAX_USB_PHY_PAGE1_DATA_SIZE, + .page1 = { [14] = {0xf5, 0x1}, }, + .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, + .page2 = { [7] = {0xe7, 0x44}, }, + .check_efuse = true, + .num_phy = 1, + .check_efuse_version = CHECK_EFUSE_V1, + .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, + .dc_driving_mask = 0x1f, + .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, + .dc_disconnect_mask = 0xf, + .usb_dc_disconnect_at_page0 = false, + .do_toggle = true, + .do_toggle_driving = false, + .driving_updated_for_dev_dis = 0x8, + .use_default_parameter = false, + .is_double_sensitivity_mode = true, +}; + +static const struct phy_cfg rtd1315e_phy_cfg = { + .page0_size = MAX_USB_PHY_PAGE0_DATA_SIZE, + .page0 = { [0] = {0xe0, 0xa3}, + [4] = {0xe4, 0x8c}, + [5] = {0xe5, 0x4f}, + [6] = {0xe6, 0x02}, }, + .page1_size = MAX_USB_PHY_PAGE1_DATA_SIZE, + .page1 = { [3] = {0xe3, 0x7f}, + [14] = {0xf5, 0x01}, }, + .page2_size = MAX_USB_PHY_PAGE2_DATA_SIZE, + .page2 = { [7] = {0xe7, 0x44}, }, + .num_phy = 1, + .check_efuse = true, + .check_efuse_version = CHECK_EFUSE_V2, + .efuse_dc_driving_rate = EFUS_USB_DC_CAL_RATE, + .dc_driving_mask = 0x1f, + .efuse_dc_disconnect_rate = EFUS_USB_DC_DIS_RATE, + .dc_disconnect_mask = 0xf, + .usb_dc_disconnect_at_page0 = false, + .do_toggle = true, + .do_toggle_driving = false, + .driving_updated_for_dev_dis = 0x8, + .use_default_parameter = false, + .is_double_sensitivity_mode = true, +}; + +static const struct of_device_id usbphy_rtk_dt_match[] = { + { .compatible = "realtek,rtd1295-usb2phy", .data = &rtd1295_phy_cfg }, + { .compatible = "realtek,rtd1312c-usb2phy", .data = &rtd1312c_phy_cfg }, + { .compatible = "realtek,rtd1315e-usb2phy", .data = &rtd1315e_phy_cfg }, + { .compatible = "realtek,rtd1319-usb2phy", .data = &rtd1319_phy_cfg }, + { .compatible = "realtek,rtd1319d-usb2phy", .data = &rtd1319d_phy_cfg }, + { .compatible = "realtek,rtd1395-usb2phy", .data = &rtd1395_phy_cfg }, + { .compatible = "realtek,rtd1395-usb2phy-2port", .data = &rtd1395_phy_cfg_2port }, + { .compatible = "realtek,rtd1619-usb2phy", .data = &rtd1619_phy_cfg }, + { .compatible = "realtek,rtd1619b-usb2phy", .data = &rtd1619b_phy_cfg }, + {}, +}; +MODULE_DEVICE_TABLE(of, usbphy_rtk_dt_match); + +static struct platform_driver rtk_usb2phy_driver = { + .probe = rtk_usb2phy_probe, + .remove_new = rtk_usb2phy_remove, + .driver = { + .name = "rtk-usb2phy", + .of_match_table = usbphy_rtk_dt_match, + }, +}; + +module_platform_driver(rtk_usb2phy_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Stanley Chang <stanley_chang@realtek.com>"); +MODULE_DESCRIPTION("Realtek usb 2.0 phy driver"); diff --git a/drivers/phy/realtek/phy-rtk-usb3.c b/drivers/phy/realtek/phy-rtk-usb3.c new file mode 100644 index 0000000000000..dfcf4b921bba6 --- /dev/null +++ b/drivers/phy/realtek/phy-rtk-usb3.c @@ -0,0 +1,748 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * phy-rtk-usb3.c RTK usb3.0 phy driver + * + * copyright (c) 2023 realtek semiconductor corporation + * + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> +#include <linux/uaccess.h> +#include <linux/debugfs.h> +#include <linux/nvmem-consumer.h> +#include <linux/regmap.h> +#include <linux/sys_soc.h> +#include <linux/mfd/syscon.h> +#include <linux/phy/phy.h> +#include <linux/usb.h> + +#define USB_MDIO_CTRL_PHY_BUSY BIT(7) +#define USB_MDIO_CTRL_PHY_WRITE BIT(0) +#define USB_MDIO_CTRL_PHY_ADDR_SHIFT 8 +#define USB_MDIO_CTRL_PHY_DATA_SHIFT 16 + +#define MAX_USB_PHY_DATA_SIZE 0x30 +#define PHY_ADDR_0X09 0x09 +#define PHY_ADDR_0X0B 0x0b +#define PHY_ADDR_0X0D 0x0d +#define PHY_ADDR_0X10 0x10 +#define PHY_ADDR_0X1F 0x1f +#define PHY_ADDR_0X20 0x20 +#define PHY_ADDR_0X21 0x21 +#define PHY_ADDR_0X30 0x30 + +#define REG_0X09_FORCE_CALIBRATION BIT(9) +#define REG_0X0B_RX_OFFSET_RANGE_MASK 0xc +#define REG_0X0D_RX_DEBUG_TEST_EN BIT(6) +#define REG_0X10_DEBUG_MODE_SETTING 0x3c0 +#define REG_0X10_DEBUG_MODE_SETTING_MASK 0x3f8 +#define REG_0X1F_RX_OFFSET_CODE_MASK 0x1e + +#define USB_U3_TX_LFPS_SWING_TRIM_SHIFT 4 +#define USB_U3_TX_LFPS_SWING_TRIM_MASK 0xf +#define AMPLITUDE_CONTROL_COARSE_MASK 0xff +#define AMPLITUDE_CONTROL_FINE_MASK 0xffff +#define AMPLITUDE_CONTROL_COARSE_DEFAULT 0xff +#define AMPLITUDE_CONTROL_FINE_DEFAULT 0xffff + +#define PHY_ADDR_MAP_ARRAY_INDEX(addr) (addr) +#define ARRAY_INDEX_MAP_PHY_ADDR(index) (index) + +struct phy_reg { + void __iomem *reg_mdio_ctl; +}; + +struct phy_data { + u8 addr; + u16 data; +}; + +struct phy_cfg { + int param_size; + struct phy_data param[MAX_USB_PHY_DATA_SIZE]; + + bool check_efuse; + bool do_toggle; + bool do_toggle_once; + bool use_default_parameter; + bool check_rx_front_end_offset; +}; + +struct phy_parameter { + struct phy_reg phy_reg; + + /* Get from efuse */ + u8 efuse_usb_u3_tx_lfps_swing_trim; + + /* Get from dts */ + u32 amplitude_control_coarse; + u32 amplitude_control_fine; +}; + +struct rtk_phy { + struct device *dev; + + struct phy_cfg *phy_cfg; + int num_phy; + struct phy_parameter *phy_parameter; + + struct dentry *debug_dir; +}; + +#define PHY_IO_TIMEOUT_USEC (50000) +#define PHY_IO_DELAY_US (100) + +static inline int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) +{ + int ret; + unsigned int val; + + ret = read_poll_timeout(readl, val, ((val & mask) == result), + PHY_IO_DELAY_US, PHY_IO_TIMEOUT_USEC, false, reg); + if (ret) { + pr_err("%s can't program USB phy\n", __func__); + return -ETIMEDOUT; + } + + return 0; +} + +static int rtk_phy3_wait_vbusy(struct phy_reg *phy_reg) +{ + return utmi_wait_register(phy_reg->reg_mdio_ctl, USB_MDIO_CTRL_PHY_BUSY, 0); +} + +static u16 rtk_phy_read(struct phy_reg *phy_reg, char addr) +{ + unsigned int tmp; + u32 value; + + tmp = (addr << USB_MDIO_CTRL_PHY_ADDR_SHIFT); + + writel(tmp, phy_reg->reg_mdio_ctl); + + rtk_phy3_wait_vbusy(phy_reg); + + value = readl(phy_reg->reg_mdio_ctl); + value = value >> USB_MDIO_CTRL_PHY_DATA_SHIFT; + + return (u16)value; +} + +static int rtk_phy_write(struct phy_reg *phy_reg, char addr, u16 data) +{ + unsigned int val; + + val = USB_MDIO_CTRL_PHY_WRITE | + (addr << USB_MDIO_CTRL_PHY_ADDR_SHIFT) | + (data << USB_MDIO_CTRL_PHY_DATA_SHIFT); + + writel(val, phy_reg->reg_mdio_ctl); + + rtk_phy3_wait_vbusy(phy_reg); + + return 0; +} + +static void do_rtk_usb3_phy_toggle(struct rtk_phy *rtk_phy, int index, bool connect) +{ + struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; + struct phy_reg *phy_reg; + struct phy_parameter *phy_parameter; + struct phy_data *phy_data; + u8 addr; + u16 data; + int i; + + phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; + phy_reg = &phy_parameter->phy_reg; + + if (!phy_cfg->do_toggle) + return; + + i = PHY_ADDR_MAP_ARRAY_INDEX(PHY_ADDR_0X09); + phy_data = phy_cfg->param + i; + addr = phy_data->addr; + data = phy_data->data; + + if (!addr && !data) { + addr = PHY_ADDR_0X09; + data = rtk_phy_read(phy_reg, addr); + phy_data->addr = addr; + phy_data->data = data; + } + + rtk_phy_write(phy_reg, addr, data & (~REG_0X09_FORCE_CALIBRATION)); + mdelay(1); + rtk_phy_write(phy_reg, addr, data | REG_0X09_FORCE_CALIBRATION); +} + +static int do_rtk_phy_init(struct rtk_phy *rtk_phy, int index) +{ + struct phy_cfg *phy_cfg; + struct phy_reg *phy_reg; + struct phy_parameter *phy_parameter; + int i = 0; + + phy_cfg = rtk_phy->phy_cfg; + phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; + phy_reg = &phy_parameter->phy_reg; + + if (phy_cfg->use_default_parameter) + goto do_toggle; + + for (i = 0; i < phy_cfg->param_size; i++) { + struct phy_data *phy_data = phy_cfg->param + i; + u8 addr = phy_data->addr; + u16 data = phy_data->data; + + if (!addr && !data) + continue; + + rtk_phy_write(phy_reg, addr, data); + } + +do_toggle: + if (phy_cfg->do_toggle_once) + phy_cfg->do_toggle = true; + + do_rtk_usb3_phy_toggle(rtk_phy, index, false); + + if (phy_cfg->do_toggle_once) { + u16 check_value = 0; + int count = 10; + u16 value_0x0d, value_0x10; + + /* Enable Debug mode by set 0x0D and 0x10 */ + value_0x0d = rtk_phy_read(phy_reg, PHY_ADDR_0X0D); + value_0x10 = rtk_phy_read(phy_reg, PHY_ADDR_0X10); + + rtk_phy_write(phy_reg, PHY_ADDR_0X0D, + value_0x0d | REG_0X0D_RX_DEBUG_TEST_EN); + rtk_phy_write(phy_reg, PHY_ADDR_0X10, + (value_0x10 & ~REG_0X10_DEBUG_MODE_SETTING_MASK) | + REG_0X10_DEBUG_MODE_SETTING); + + check_value = rtk_phy_read(phy_reg, PHY_ADDR_0X30); + + while (!(check_value & BIT(15))) { + check_value = rtk_phy_read(phy_reg, PHY_ADDR_0X30); + mdelay(1); + if (count-- < 0) + break; + } + + if (!(check_value & BIT(15))) + dev_info(rtk_phy->dev, "toggle fail addr=0x%02x, data=0x%04x\n", + PHY_ADDR_0X30, check_value); + + /* Disable Debug mode by set 0x0D and 0x10 to default*/ + rtk_phy_write(phy_reg, PHY_ADDR_0X0D, value_0x0d); + rtk_phy_write(phy_reg, PHY_ADDR_0X10, value_0x10); + + phy_cfg->do_toggle = false; + } + + if (phy_cfg->check_rx_front_end_offset) { + u16 rx_offset_code, rx_offset_range; + u16 code_mask = REG_0X1F_RX_OFFSET_CODE_MASK; + u16 range_mask = REG_0X0B_RX_OFFSET_RANGE_MASK; + bool do_update = false; + + rx_offset_code = rtk_phy_read(phy_reg, PHY_ADDR_0X1F); + if (((rx_offset_code & code_mask) == 0x0) || + ((rx_offset_code & code_mask) == code_mask)) + do_update = true; + + rx_offset_range = rtk_phy_read(phy_reg, PHY_ADDR_0X0B); + if (((rx_offset_range & range_mask) == range_mask) && do_update) { + dev_warn(rtk_phy->dev, "Don't update rx_offset_range (rx_offset_code=0x%x, rx_offset_range=0x%x)\n", + rx_offset_code, rx_offset_range); + do_update = false; + } + + if (do_update) { + u16 tmp1, tmp2; + + tmp1 = rx_offset_range & (~range_mask); + tmp2 = rx_offset_range & range_mask; + tmp2 += (1 << 2); + rx_offset_range = tmp1 | (tmp2 & range_mask); + rtk_phy_write(phy_reg, PHY_ADDR_0X0B, rx_offset_range); + goto do_toggle; + } + } + + return 0; +} + +static int rtk_phy_init(struct phy *phy) +{ + struct rtk_phy *rtk_phy = phy_get_drvdata(phy); + int ret = 0; + int i; + unsigned long phy_init_time = jiffies; + + for (i = 0; i < rtk_phy->num_phy; i++) + ret = do_rtk_phy_init(rtk_phy, i); + + dev_dbg(rtk_phy->dev, "Initialized RTK USB 3.0 PHY (take %dms)\n", + jiffies_to_msecs(jiffies - phy_init_time)); + + return ret; +} + +static int rtk_phy_exit(struct phy *phy) +{ + return 0; +} + +static void rtk_phy_toggle(struct rtk_phy *rtk_phy, bool connect, int port) +{ + int index = port; + + if (index > rtk_phy->num_phy) { + dev_err(rtk_phy->dev, "%s: The port=%d is not in usb phy (num_phy=%d)\n", + __func__, index, rtk_phy->num_phy); + return; + } + + do_rtk_usb3_phy_toggle(rtk_phy, index, connect); +} + +static int rtk_phy_connect(struct phy *phy, int port) +{ + struct rtk_phy *rtk_phy = phy_get_drvdata(phy); + + dev_dbg(rtk_phy->dev, "%s port=%d\n", __func__, port); + rtk_phy_toggle(rtk_phy, true, port); + + return 0; +} + +static int rtk_phy_disconnect(struct phy *phy, int port) +{ + struct rtk_phy *rtk_phy = phy_get_drvdata(phy); + + dev_dbg(rtk_phy->dev, "%s port=%d\n", __func__, port); + rtk_phy_toggle(rtk_phy, false, port); + + return 0; +} + +static const struct phy_ops ops = { + .init = rtk_phy_init, + .exit = rtk_phy_exit, + .connect = rtk_phy_connect, + .disconnect = rtk_phy_disconnect, + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_DEBUG_FS +static struct dentry *create_phy_debug_root(void) +{ + struct dentry *phy_debug_root; + + phy_debug_root = debugfs_lookup("phy", usb_debug_root); + if (!phy_debug_root) + phy_debug_root = debugfs_create_dir("phy", usb_debug_root); + + return phy_debug_root; +} + +static int rtk_usb3_parameter_show(struct seq_file *s, void *unused) +{ + struct rtk_phy *rtk_phy = s->private; + struct phy_cfg *phy_cfg; + int i, index; + + phy_cfg = rtk_phy->phy_cfg; + + seq_puts(s, "Property:\n"); + seq_printf(s, " check_efuse: %s\n", + phy_cfg->check_efuse ? "Enable" : "Disable"); + seq_printf(s, " do_toggle: %s\n", + phy_cfg->do_toggle ? "Enable" : "Disable"); + seq_printf(s, " do_toggle_once: %s\n", + phy_cfg->do_toggle_once ? "Enable" : "Disable"); + seq_printf(s, " use_default_parameter: %s\n", + phy_cfg->use_default_parameter ? "Enable" : "Disable"); + + for (index = 0; index < rtk_phy->num_phy; index++) { + struct phy_reg *phy_reg; + struct phy_parameter *phy_parameter; + + phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; + phy_reg = &phy_parameter->phy_reg; + + seq_printf(s, "PHY %d:\n", index); + + for (i = 0; i < phy_cfg->param_size; i++) { + struct phy_data *phy_data = phy_cfg->param + i; + u8 addr = ARRAY_INDEX_MAP_PHY_ADDR(i); + u16 data = phy_data->data; + + if (!phy_data->addr && !data) + seq_printf(s, " addr = 0x%02x, data = none ==> read value = 0x%04x\n", + addr, rtk_phy_read(phy_reg, addr)); + else + seq_printf(s, " addr = 0x%02x, data = 0x%04x ==> read value = 0x%04x\n", + addr, data, rtk_phy_read(phy_reg, addr)); + } + + seq_puts(s, "PHY Property:\n"); + seq_printf(s, " efuse_usb_u3_tx_lfps_swing_trim: 0x%x\n", + (int)phy_parameter->efuse_usb_u3_tx_lfps_swing_trim); + seq_printf(s, " amplitude_control_coarse: 0x%x\n", + (int)phy_parameter->amplitude_control_coarse); + seq_printf(s, " amplitude_control_fine: 0x%x\n", + (int)phy_parameter->amplitude_control_fine); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(rtk_usb3_parameter); + +static inline void create_debug_files(struct rtk_phy *rtk_phy) +{ + struct dentry *phy_debug_root = NULL; + + phy_debug_root = create_phy_debug_root(); + + if (!phy_debug_root) + return; + + rtk_phy->debug_dir = debugfs_create_dir(dev_name(rtk_phy->dev), phy_debug_root); + + debugfs_create_file("parameter", 0444, rtk_phy->debug_dir, rtk_phy, + &rtk_usb3_parameter_fops); +} + +static inline void remove_debug_files(struct rtk_phy *rtk_phy) +{ + debugfs_remove_recursive(rtk_phy->debug_dir); +} +#else +static inline void create_debug_files(struct rtk_phy *rtk_phy) { } +static inline void remove_debug_files(struct rtk_phy *rtk_phy) { } +#endif /* CONFIG_DEBUG_FS */ + +static int get_phy_data_by_efuse(struct rtk_phy *rtk_phy, + struct phy_parameter *phy_parameter, int index) +{ + struct phy_cfg *phy_cfg = rtk_phy->phy_cfg; + u8 value = 0; + struct nvmem_cell *cell; + + if (!phy_cfg->check_efuse) + goto out; + + cell = nvmem_cell_get(rtk_phy->dev, "usb_u3_tx_lfps_swing_trim"); + if (IS_ERR(cell)) { + dev_dbg(rtk_phy->dev, "%s no usb_u3_tx_lfps_swing_trim: %ld\n", + __func__, PTR_ERR(cell)); + } else { + unsigned char *buf; + size_t buf_size; + + buf = nvmem_cell_read(cell, &buf_size); + if (!IS_ERR(buf)) { + value = buf[0] & USB_U3_TX_LFPS_SWING_TRIM_MASK; + kfree(buf); + } + nvmem_cell_put(cell); + } + + if (value > 0 && value < 0x8) + phy_parameter->efuse_usb_u3_tx_lfps_swing_trim = 0x8; + else + phy_parameter->efuse_usb_u3_tx_lfps_swing_trim = (u8)value; + +out: + return 0; +} + +static void update_amplitude_control_value(struct rtk_phy *rtk_phy, + struct phy_parameter *phy_parameter) +{ + struct phy_cfg *phy_cfg; + struct phy_reg *phy_reg; + + phy_reg = &phy_parameter->phy_reg; + phy_cfg = rtk_phy->phy_cfg; + + if (phy_parameter->amplitude_control_coarse != AMPLITUDE_CONTROL_COARSE_DEFAULT) { + u16 val_mask = AMPLITUDE_CONTROL_COARSE_MASK; + u16 data; + + if (!phy_cfg->param[PHY_ADDR_0X20].addr && !phy_cfg->param[PHY_ADDR_0X20].data) { + phy_cfg->param[PHY_ADDR_0X20].addr = PHY_ADDR_0X20; + data = rtk_phy_read(phy_reg, PHY_ADDR_0X20); + } else { + data = phy_cfg->param[PHY_ADDR_0X20].data; + } + + data &= (~val_mask); + data |= (phy_parameter->amplitude_control_coarse & val_mask); + + phy_cfg->param[PHY_ADDR_0X20].data = data; + } + + if (phy_parameter->efuse_usb_u3_tx_lfps_swing_trim) { + u8 efuse_val = phy_parameter->efuse_usb_u3_tx_lfps_swing_trim; + u16 val_mask = USB_U3_TX_LFPS_SWING_TRIM_MASK; + int val_shift = USB_U3_TX_LFPS_SWING_TRIM_SHIFT; + u16 data; + + if (!phy_cfg->param[PHY_ADDR_0X20].addr && !phy_cfg->param[PHY_ADDR_0X20].data) { + phy_cfg->param[PHY_ADDR_0X20].addr = PHY_ADDR_0X20; + data = rtk_phy_read(phy_reg, PHY_ADDR_0X20); + } else { + data = phy_cfg->param[PHY_ADDR_0X20].data; + } + + data &= ~(val_mask << val_shift); + data |= ((efuse_val & val_mask) << val_shift); + + phy_cfg->param[PHY_ADDR_0X20].data = data; + } + + if (phy_parameter->amplitude_control_fine != AMPLITUDE_CONTROL_FINE_DEFAULT) { + u16 val_mask = AMPLITUDE_CONTROL_FINE_MASK; + + if (!phy_cfg->param[PHY_ADDR_0X21].addr && !phy_cfg->param[PHY_ADDR_0X21].data) + phy_cfg->param[PHY_ADDR_0X21].addr = PHY_ADDR_0X21; + + phy_cfg->param[PHY_ADDR_0X21].data = + phy_parameter->amplitude_control_fine & val_mask; + } +} + +static int parse_phy_data(struct rtk_phy *rtk_phy) +{ + struct device *dev = rtk_phy->dev; + struct phy_parameter *phy_parameter; + int ret = 0; + int index; + + rtk_phy->phy_parameter = devm_kzalloc(dev, sizeof(struct phy_parameter) * + rtk_phy->num_phy, GFP_KERNEL); + if (!rtk_phy->phy_parameter) + return -ENOMEM; + + for (index = 0; index < rtk_phy->num_phy; index++) { + phy_parameter = &((struct phy_parameter *)rtk_phy->phy_parameter)[index]; + + phy_parameter->phy_reg.reg_mdio_ctl = of_iomap(dev->of_node, 0) + index; + + /* Amplitude control address 0x20 bit 0 to bit 7 */ + if (of_property_read_u32(dev->of_node, "realtek,amplitude-control-coarse-tuning", + &phy_parameter->amplitude_control_coarse)) + phy_parameter->amplitude_control_coarse = AMPLITUDE_CONTROL_COARSE_DEFAULT; + + /* Amplitude control address 0x21 bit 0 to bit 16 */ + if (of_property_read_u32(dev->of_node, "realtek,amplitude-control-fine-tuning", + &phy_parameter->amplitude_control_fine)) + phy_parameter->amplitude_control_fine = AMPLITUDE_CONTROL_FINE_DEFAULT; + + get_phy_data_by_efuse(rtk_phy, phy_parameter, index); + + update_amplitude_control_value(rtk_phy, phy_parameter); + } + + return ret; +} + +static int rtk_usb3phy_probe(struct platform_device *pdev) +{ + struct rtk_phy *rtk_phy; + struct device *dev = &pdev->dev; + struct phy *generic_phy; + struct phy_provider *phy_provider; + const struct phy_cfg *phy_cfg; + int ret; + + phy_cfg = of_device_get_match_data(dev); + if (!phy_cfg) { + dev_err(dev, "phy config are not assigned!\n"); + return -EINVAL; + } + + rtk_phy = devm_kzalloc(dev, sizeof(*rtk_phy), GFP_KERNEL); + if (!rtk_phy) + return -ENOMEM; + + rtk_phy->dev = &pdev->dev; + rtk_phy->phy_cfg = devm_kzalloc(dev, sizeof(*phy_cfg), GFP_KERNEL); + + memcpy(rtk_phy->phy_cfg, phy_cfg, sizeof(*phy_cfg)); + + rtk_phy->num_phy = 1; + + ret = parse_phy_data(rtk_phy); + if (ret) + goto err; + + platform_set_drvdata(pdev, rtk_phy); + + generic_phy = devm_phy_create(rtk_phy->dev, NULL, &ops); + if (IS_ERR(generic_phy)) + return PTR_ERR(generic_phy); + + phy_set_drvdata(generic_phy, rtk_phy); + + phy_provider = devm_of_phy_provider_register(rtk_phy->dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + create_debug_files(rtk_phy); + +err: + return ret; +} + +static void rtk_usb3phy_remove(struct platform_device *pdev) +{ + struct rtk_phy *rtk_phy = platform_get_drvdata(pdev); + + remove_debug_files(rtk_phy); +} + +static const struct phy_cfg rtd1295_phy_cfg = { + .param_size = MAX_USB_PHY_DATA_SIZE, + .param = { [0] = {0x01, 0x4008}, [1] = {0x01, 0xe046}, + [2] = {0x02, 0x6046}, [3] = {0x03, 0x2779}, + [4] = {0x04, 0x72f5}, [5] = {0x05, 0x2ad3}, + [6] = {0x06, 0x000e}, [7] = {0x07, 0x2e00}, + [8] = {0x08, 0x3591}, [9] = {0x09, 0x525c}, + [10] = {0x0a, 0xa600}, [11] = {0x0b, 0xa904}, + [12] = {0x0c, 0xc000}, [13] = {0x0d, 0xef1c}, + [14] = {0x0e, 0x2000}, [15] = {0x0f, 0x0000}, + [16] = {0x10, 0x000c}, [17] = {0x11, 0x4c00}, + [18] = {0x12, 0xfc00}, [19] = {0x13, 0x0c81}, + [20] = {0x14, 0xde01}, [21] = {0x15, 0x0000}, + [22] = {0x16, 0x0000}, [23] = {0x17, 0x0000}, + [24] = {0x18, 0x0000}, [25] = {0x19, 0x4004}, + [26] = {0x1a, 0x1260}, [27] = {0x1b, 0xff00}, + [28] = {0x1c, 0xcb00}, [29] = {0x1d, 0xa03f}, + [30] = {0x1e, 0xc2e0}, [31] = {0x1f, 0x2807}, + [32] = {0x20, 0x947a}, [33] = {0x21, 0x88aa}, + [34] = {0x22, 0x0057}, [35] = {0x23, 0xab66}, + [36] = {0x24, 0x0800}, [37] = {0x25, 0x0000}, + [38] = {0x26, 0x040a}, [39] = {0x27, 0x01d6}, + [40] = {0x28, 0xf8c2}, [41] = {0x29, 0x3080}, + [42] = {0x2a, 0x3082}, [43] = {0x2b, 0x2078}, + [44] = {0x2c, 0xffff}, [45] = {0x2d, 0xffff}, + [46] = {0x2e, 0x0000}, [47] = {0x2f, 0x0040}, }, + .check_efuse = false, + .do_toggle = true, + .do_toggle_once = false, + .use_default_parameter = false, + .check_rx_front_end_offset = false, +}; + +static const struct phy_cfg rtd1619_phy_cfg = { + .param_size = MAX_USB_PHY_DATA_SIZE, + .param = { [8] = {0x08, 0x3591}, + [38] = {0x26, 0x840b}, + [40] = {0x28, 0xf842}, }, + .check_efuse = false, + .do_toggle = true, + .do_toggle_once = false, + .use_default_parameter = false, + .check_rx_front_end_offset = false, +}; + +static const struct phy_cfg rtd1319_phy_cfg = { + .param_size = MAX_USB_PHY_DATA_SIZE, + .param = { [1] = {0x01, 0xac86}, + [6] = {0x06, 0x0003}, + [9] = {0x09, 0x924c}, + [10] = {0x0a, 0xa608}, + [11] = {0x0b, 0xb905}, + [14] = {0x0e, 0x2010}, + [32] = {0x20, 0x705a}, + [33] = {0x21, 0xf645}, + [34] = {0x22, 0x0013}, + [35] = {0x23, 0xcb66}, + [41] = {0x29, 0xff00}, }, + .check_efuse = true, + .do_toggle = true, + .do_toggle_once = false, + .use_default_parameter = false, + .check_rx_front_end_offset = false, +}; + +static const struct phy_cfg rtd1619b_phy_cfg = { + .param_size = MAX_USB_PHY_DATA_SIZE, + .param = { [1] = {0x01, 0xac8c}, + [6] = {0x06, 0x0017}, + [9] = {0x09, 0x724c}, + [10] = {0x0a, 0xb610}, + [11] = {0x0b, 0xb90d}, + [13] = {0x0d, 0xef2a}, + [15] = {0x0f, 0x9050}, + [16] = {0x10, 0x000c}, + [32] = {0x20, 0x70ff}, + [34] = {0x22, 0x0013}, + [35] = {0x23, 0xdb66}, + [38] = {0x26, 0x8609}, + [41] = {0x29, 0xff13}, + [42] = {0x2a, 0x3070}, }, + .check_efuse = true, + .do_toggle = false, + .do_toggle_once = true, + .use_default_parameter = false, + .check_rx_front_end_offset = false, +}; + +static const struct phy_cfg rtd1319d_phy_cfg = { + .param_size = MAX_USB_PHY_DATA_SIZE, + .param = { [1] = {0x01, 0xac89}, + [4] = {0x04, 0xf2f5}, + [6] = {0x06, 0x0017}, + [9] = {0x09, 0x424c}, + [10] = {0x0a, 0x9610}, + [11] = {0x0b, 0x9901}, + [12] = {0x0c, 0xf000}, + [13] = {0x0d, 0xef2a}, + [14] = {0x0e, 0x1000}, + [15] = {0x0f, 0x9050}, + [32] = {0x20, 0x7077}, + [35] = {0x23, 0x0b62}, + [37] = {0x25, 0x10ec}, + [42] = {0x2a, 0x3070}, }, + .check_efuse = true, + .do_toggle = false, + .do_toggle_once = true, + .use_default_parameter = false, + .check_rx_front_end_offset = true, +}; + +static const struct of_device_id usbphy_rtk_dt_match[] = { + { .compatible = "realtek,rtd1295-usb3phy", .data = &rtd1295_phy_cfg }, + { .compatible = "realtek,rtd1319-usb3phy", .data = &rtd1319_phy_cfg }, + { .compatible = "realtek,rtd1319d-usb3phy", .data = &rtd1319d_phy_cfg }, + { .compatible = "realtek,rtd1619-usb3phy", .data = &rtd1619_phy_cfg }, + { .compatible = "realtek,rtd1619b-usb3phy", .data = &rtd1619b_phy_cfg }, + {}, +}; +MODULE_DEVICE_TABLE(of, usbphy_rtk_dt_match); + +static struct platform_driver rtk_usb3phy_driver = { + .probe = rtk_usb3phy_probe, + .remove_new = rtk_usb3phy_remove, + .driver = { + .name = "rtk-usb3phy", + .of_match_table = usbphy_rtk_dt_match, + }, +}; + +module_platform_driver(rtk_usb3phy_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Stanley Chang <stanley_chang@realtek.com>"); +MODULE_DESCRIPTION("Realtek usb 3.0 phy driver"); diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 0dc86a7740e38..cfdb54b6070a4 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -1531,6 +1531,19 @@ int tegra_xusb_padctl_get_usb3_companion(struct tegra_xusb_padctl *padctl, } EXPORT_SYMBOL_GPL(tegra_xusb_padctl_get_usb3_companion); +int tegra_xusb_padctl_get_port_number(struct phy *phy) +{ + struct tegra_xusb_lane *lane; + + if (!phy) + return -ENODEV; + + lane = phy_get_drvdata(phy); + + return lane->index; +} +EXPORT_SYMBOL_GPL(tegra_xusb_padctl_get_port_number); + MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>"); MODULE_DESCRIPTION("Tegra XUSB Pad Controller driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c index 2b2f14a1b7119..4d305876ec08f 100644 --- a/drivers/platform/chrome/cros_ec_typec.c +++ b/drivers/platform/chrome/cros_ec_typec.c @@ -24,6 +24,23 @@ #define DP_PORT_VDO (DP_CONF_SET_PIN_ASSIGN(BIT(DP_PIN_ASSIGN_C) | BIT(DP_PIN_ASSIGN_D)) | \ DP_CAP_DFP_D | DP_CAP_RECEPTACLE) +static void cros_typec_role_switch_quirk(struct fwnode_handle *fwnode) +{ +#ifdef CONFIG_ACPI + struct fwnode_handle *switch_fwnode; + + /* Supply the USB role switch with the correct pld_crc if it's missing. */ + switch_fwnode = fwnode_find_reference(fwnode, "usb-role-switch", 0); + if (!IS_ERR_OR_NULL(switch_fwnode)) { + struct acpi_device *adev = to_acpi_device_node(switch_fwnode); + + if (adev && !adev->pld_crc) + adev->pld_crc = to_acpi_device_node(fwnode)->pld_crc; + fwnode_handle_put(switch_fwnode); + } +#endif +} + static int cros_typec_parse_port_props(struct typec_capability *cap, struct fwnode_handle *fwnode, struct device *dev) @@ -66,6 +83,8 @@ static int cros_typec_parse_port_props(struct typec_capability *cap, cap->prefer_role = ret; } + cros_typec_role_switch_quirk(fwnode); + cap->fwnode = fwnode; return 0; diff --git a/drivers/thunderbolt/Makefile b/drivers/thunderbolt/Makefile index c8b3d7b780982..b44b32dcb8322 100644 --- a/drivers/thunderbolt/Makefile +++ b/drivers/thunderbolt/Makefile @@ -1,4 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only +ccflags-y := -I$(src) obj-${CONFIG_USB4} := thunderbolt.o thunderbolt-objs := nhi.o nhi_ops.o ctl.o tb.o switch.o cap.o path.o tunnel.o eeprom.o thunderbolt-objs += domain.o dma_port.o icm.o property.o xdomain.o lc.o tmu.o usb4.o diff --git a/drivers/thunderbolt/ctl.c b/drivers/thunderbolt/ctl.c index d997a4c545f79..4bdb2d45e0bff 100644 --- a/drivers/thunderbolt/ctl.c +++ b/drivers/thunderbolt/ctl.c @@ -15,6 +15,8 @@ #include "ctl.h" +#define CREATE_TRACE_POINTS +#include "trace.h" #define TB_CTL_RX_PKG_COUNT 10 #define TB_CTL_RETRIES 4 @@ -32,6 +34,7 @@ * @timeout_msec: Default timeout for non-raw control messages * @callback: Callback called when hotplug message is received * @callback_data: Data passed to @callback + * @index: Domain number. This will be output with the trace record. */ struct tb_ctl { struct tb_nhi *nhi; @@ -47,6 +50,8 @@ struct tb_ctl { int timeout_msec; event_cb callback; void *callback_data; + + int index; }; @@ -369,6 +374,9 @@ static int tb_ctl_tx(struct tb_ctl *ctl, const void *data, size_t len, pkg->frame.size = len + 4; pkg->frame.sof = type; pkg->frame.eof = type; + + trace_tb_tx(ctl->index, type, data, len); + cpu_to_be32_array(pkg->buffer, data, len / 4); *(__be32 *) (pkg->buffer + len) = tb_crc(pkg->buffer, len); @@ -384,6 +392,7 @@ static int tb_ctl_tx(struct tb_ctl *ctl, const void *data, size_t len, static bool tb_ctl_handle_event(struct tb_ctl *ctl, enum tb_cfg_pkg_type type, struct ctl_pkg *pkg, size_t size) { + trace_tb_event(ctl->index, type, pkg->buffer, size); return ctl->callback(ctl->callback_data, type, pkg->buffer, size); } @@ -489,6 +498,9 @@ static void tb_ctl_rx_callback(struct tb_ring *ring, struct ring_frame *frame, * triggered from messing with the active requests. */ req = tb_cfg_request_find(pkg->ctl, pkg); + + trace_tb_rx(pkg->ctl->index, frame->eof, pkg->buffer, frame->size, !req); + if (req) { if (req->copy(req, pkg)) schedule_work(&req->work); @@ -614,6 +626,7 @@ struct tb_cfg_result tb_cfg_request_sync(struct tb_ctl *ctl, /** * tb_ctl_alloc() - allocate a control channel * @nhi: Pointer to NHI + * @index: Domain number * @timeout_msec: Default timeout used with non-raw control messages * @cb: Callback called for plug events * @cb_data: Data passed to @cb @@ -622,14 +635,16 @@ struct tb_cfg_result tb_cfg_request_sync(struct tb_ctl *ctl, * * Return: Returns a pointer on success or NULL on failure. */ -struct tb_ctl *tb_ctl_alloc(struct tb_nhi *nhi, int timeout_msec, event_cb cb, - void *cb_data) +struct tb_ctl *tb_ctl_alloc(struct tb_nhi *nhi, int index, int timeout_msec, + event_cb cb, void *cb_data) { int i; struct tb_ctl *ctl = kzalloc(sizeof(*ctl), GFP_KERNEL); if (!ctl) return NULL; + ctl->nhi = nhi; + ctl->index = index; ctl->timeout_msec = timeout_msec; ctl->callback = cb; ctl->callback_data = cb_data; diff --git a/drivers/thunderbolt/ctl.h b/drivers/thunderbolt/ctl.h index eec5c953c743c..bf930a1914723 100644 --- a/drivers/thunderbolt/ctl.h +++ b/drivers/thunderbolt/ctl.h @@ -21,8 +21,8 @@ struct tb_ctl; typedef bool (*event_cb)(void *data, enum tb_cfg_pkg_type type, const void *buf, size_t size); -struct tb_ctl *tb_ctl_alloc(struct tb_nhi *nhi, int timeout_msec, event_cb cb, - void *cb_data); +struct tb_ctl *tb_ctl_alloc(struct tb_nhi *nhi, int index, int timeout_msec, + event_cb cb, void *cb_data); void tb_ctl_start(struct tb_ctl *ctl); void tb_ctl_stop(struct tb_ctl *ctl); void tb_ctl_free(struct tb_ctl *ctl); diff --git a/drivers/thunderbolt/domain.c b/drivers/thunderbolt/domain.c index 9fb1a64f3300b..0023017299f76 100644 --- a/drivers/thunderbolt/domain.c +++ b/drivers/thunderbolt/domain.c @@ -321,12 +321,12 @@ static void tb_domain_release(struct device *dev) tb_ctl_free(tb->ctl); destroy_workqueue(tb->wq); - ida_simple_remove(&tb_domain_ida, tb->index); + ida_free(&tb_domain_ida, tb->index); mutex_destroy(&tb->lock); kfree(tb); } -struct device_type tb_domain_type = { +const struct device_type tb_domain_type = { .name = "thunderbolt_domain", .release = tb_domain_release, }; @@ -389,7 +389,7 @@ struct tb *tb_domain_alloc(struct tb_nhi *nhi, int timeout_msec, size_t privsize tb->nhi = nhi; mutex_init(&tb->lock); - tb->index = ida_simple_get(&tb_domain_ida, 0, 0, GFP_KERNEL); + tb->index = ida_alloc(&tb_domain_ida, GFP_KERNEL); if (tb->index < 0) goto err_free; @@ -397,7 +397,7 @@ struct tb *tb_domain_alloc(struct tb_nhi *nhi, int timeout_msec, size_t privsize if (!tb->wq) goto err_remove_ida; - tb->ctl = tb_ctl_alloc(nhi, timeout_msec, tb_domain_event_cb, tb); + tb->ctl = tb_ctl_alloc(nhi, tb->index, timeout_msec, tb_domain_event_cb, tb); if (!tb->ctl) goto err_destroy_wq; @@ -413,7 +413,7 @@ struct tb *tb_domain_alloc(struct tb_nhi *nhi, int timeout_msec, size_t privsize err_destroy_wq: destroy_workqueue(tb->wq); err_remove_ida: - ida_simple_remove(&tb_domain_ida, tb->index); + ida_free(&tb_domain_ida, tb->index); err_free: kfree(tb); @@ -423,6 +423,7 @@ err_free: /** * tb_domain_add() - Add domain to the system * @tb: Domain to add + * @reset: Issue reset to the host router * * Starts the domain and adds it to the system. Hotplugging devices will * work after this has been returned successfully. In order to remove @@ -431,7 +432,7 @@ err_free: * * Return: %0 in case of success and negative errno in case of error */ -int tb_domain_add(struct tb *tb) +int tb_domain_add(struct tb *tb, bool reset) { int ret; @@ -460,7 +461,7 @@ int tb_domain_add(struct tb *tb) /* Start the domain */ if (tb->cm_ops->start) { - ret = tb->cm_ops->start(tb); + ret = tb->cm_ops->start(tb, reset); if (ret) goto err_domain_del; } @@ -505,6 +506,10 @@ void tb_domain_remove(struct tb *tb) mutex_unlock(&tb->lock); flush_workqueue(tb->wq); + + if (tb->cm_ops->deinit) + tb->cm_ops->deinit(tb); + device_unregister(&tb->dev); } diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c index 56790d50f9e32..baf10d099c778 100644 --- a/drivers/thunderbolt/icm.c +++ b/drivers/thunderbolt/icm.c @@ -2144,7 +2144,7 @@ static int icm_runtime_resume(struct tb *tb) return 0; } -static int icm_start(struct tb *tb) +static int icm_start(struct tb *tb, bool not_used) { struct icm *icm = tb_priv(tb); int ret; diff --git a/drivers/thunderbolt/lc.c b/drivers/thunderbolt/lc.c index 633970fbe9b05..63cb4b6afb718 100644 --- a/drivers/thunderbolt/lc.c +++ b/drivers/thunderbolt/lc.c @@ -6,6 +6,8 @@ * Author: Mika Westerberg <mika.westerberg@linux.intel.com> */ +#include <linux/delay.h> + #include "tb.h" /** @@ -45,6 +47,49 @@ static int find_port_lc_cap(struct tb_port *port) return sw->cap_lc + start + phys * size; } +/** + * tb_lc_reset_port() - Trigger downstream port reset through LC + * @port: Port that is reset + * + * Triggers downstream port reset through link controller registers. + * Returns %0 in case of success negative errno otherwise. Only supports + * non-USB4 routers with link controller (that's Thunderbolt 2 and + * Thunderbolt 3). + */ +int tb_lc_reset_port(struct tb_port *port) +{ + struct tb_switch *sw = port->sw; + int cap, ret; + u32 mode; + + if (sw->generation < 2) + return -EINVAL; + + cap = find_port_lc_cap(port); + if (cap < 0) + return cap; + + ret = tb_sw_read(sw, &mode, TB_CFG_SWITCH, cap + TB_LC_PORT_MODE, 1); + if (ret) + return ret; + + mode |= TB_LC_PORT_MODE_DPR; + + ret = tb_sw_write(sw, &mode, TB_CFG_SWITCH, cap + TB_LC_PORT_MODE, 1); + if (ret) + return ret; + + fsleep(10000); + + ret = tb_sw_read(sw, &mode, TB_CFG_SWITCH, cap + TB_LC_PORT_MODE, 1); + if (ret) + return ret; + + mode &= ~TB_LC_PORT_MODE_DPR; + + return tb_sw_write(sw, &mode, TB_CFG_SWITCH, cap + TB_LC_PORT_MODE, 1); +} + static int tb_lc_set_port_configured(struct tb_port *port, bool configured) { bool upstream = tb_is_upstream_port(port); diff --git a/drivers/thunderbolt/nhi.c b/drivers/thunderbolt/nhi.c index fb4f46e51753a..7af2642b97cb8 100644 --- a/drivers/thunderbolt/nhi.c +++ b/drivers/thunderbolt/nhi.c @@ -48,7 +48,7 @@ static bool host_reset = true; module_param(host_reset, bool, 0444); -MODULE_PARM_DESC(host_reset, "reset USBv2 host router (default: true)"); +MODULE_PARM_DESC(host_reset, "reset USB4 host router (default: true)"); static int ring_interrupt_index(const struct tb_ring *ring) { @@ -465,7 +465,7 @@ static int ring_request_msix(struct tb_ring *ring, bool no_suspend) if (!nhi->pdev->msix_enabled) return 0; - ret = ida_simple_get(&nhi->msix_ida, 0, MSIX_MAX_VECS, GFP_KERNEL); + ret = ida_alloc_max(&nhi->msix_ida, MSIX_MAX_VECS - 1, GFP_KERNEL); if (ret < 0) return ret; @@ -485,7 +485,7 @@ static int ring_request_msix(struct tb_ring *ring, bool no_suspend) return 0; err_ida_remove: - ida_simple_remove(&nhi->msix_ida, ring->vector); + ida_free(&nhi->msix_ida, ring->vector); return ret; } @@ -496,7 +496,7 @@ static void ring_release_msix(struct tb_ring *ring) return; free_irq(ring->irq, ring); - ida_simple_remove(&ring->nhi->msix_ida, ring->vector); + ida_free(&ring->nhi->msix_ida, ring->vector); ring->vector = 0; ring->irq = 0; } @@ -1364,7 +1364,6 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id) nhi_check_quirks(nhi); nhi_check_iommu(nhi); - nhi_reset(nhi); res = nhi_init_msi(nhi); @@ -1392,7 +1391,7 @@ static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id) dev_dbg(dev, "NHI initialized, starting thunderbolt\n"); - res = tb_domain_add(tb); + res = tb_domain_add(tb, host_reset); if (res) { /* * At this point the RX/TX rings might already have been diff --git a/drivers/thunderbolt/nvm.c b/drivers/thunderbolt/nvm.c index 69fb3b0fa34fa..8901db2de327c 100644 --- a/drivers/thunderbolt/nvm.c +++ b/drivers/thunderbolt/nvm.c @@ -330,7 +330,7 @@ struct tb_nvm *tb_nvm_alloc(struct device *dev) if (!nvm) return ERR_PTR(-ENOMEM); - ret = ida_simple_get(&nvm_ida, 0, 0, GFP_KERNEL); + ret = ida_alloc(&nvm_ida, GFP_KERNEL); if (ret < 0) { kfree(nvm); return ERR_PTR(ret); @@ -528,7 +528,7 @@ void tb_nvm_free(struct tb_nvm *nvm) nvmem_unregister(nvm->non_active); nvmem_unregister(nvm->active); vfree(nvm->buf); - ida_simple_remove(&nvm_ida, nvm->id); + ida_free(&nvm_ida, nvm->id); } kfree(nvm); } diff --git a/drivers/thunderbolt/path.c b/drivers/thunderbolt/path.c index 091a81bbdbdc9..f760e54cd9bd1 100644 --- a/drivers/thunderbolt/path.c +++ b/drivers/thunderbolt/path.c @@ -446,6 +446,19 @@ static int __tb_path_deactivate_hop(struct tb_port *port, int hop_index, return -ETIMEDOUT; } +/** + * tb_path_deactivate_hop() - Deactivate one path in path config space + * @port: Lane or protocol adapter + * @hop_index: HopID of the path to be cleared + * + * This deactivates or clears a single path config space entry at + * @hop_index. Returns %0 in success and negative errno otherwise. + */ +int tb_path_deactivate_hop(struct tb_port *port, int hop_index) +{ + return __tb_path_deactivate_hop(port, hop_index, true); +} + static void __tb_path_deactivate_hops(struct tb_path *path, int first_hop) { int i, res; diff --git a/drivers/thunderbolt/quirks.c b/drivers/thunderbolt/quirks.c index e6bfa63b40aee..e81de9c30eac9 100644 --- a/drivers/thunderbolt/quirks.c +++ b/drivers/thunderbolt/quirks.c @@ -43,6 +43,12 @@ static void quirk_usb3_maximum_bandwidth(struct tb_switch *sw) } } +static void quirk_block_rpm_in_redrive(struct tb_switch *sw) +{ + sw->quirks |= QUIRK_KEEP_POWER_IN_DP_REDRIVE; + tb_sw_dbg(sw, "preventing runtime PM in DP redrive mode\n"); +} + struct tb_quirk { u16 hw_vendor_id; u16 hw_device_id; @@ -87,6 +93,14 @@ static const struct tb_quirk tb_quirks[] = { { 0x8087, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HUB_40G_BRIDGE, 0x0000, 0x0000, quirk_usb3_maximum_bandwidth }, /* + * Block Runtime PM in DP redrive mode for Intel Barlow Ridge host + * controllers. + */ + { 0x8087, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_80G_NHI, 0x0000, 0x0000, + quirk_block_rpm_in_redrive }, + { 0x8087, PCI_DEVICE_ID_INTEL_BARLOW_RIDGE_HOST_40G_NHI, 0x0000, 0x0000, + quirk_block_rpm_in_redrive }, + /* * CLx is not supported on AMD USB4 Yellow Carp and Pink Sardine platforms. */ { 0x0438, 0x0208, 0x0000, 0x0000, quirk_clx_disable }, diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c index d49d6628dbf29..6bb49bdcd6c18 100644 --- a/drivers/thunderbolt/retimer.c +++ b/drivers/thunderbolt/retimer.c @@ -356,7 +356,7 @@ static void tb_retimer_release(struct device *dev) kfree(rt); } -struct device_type tb_retimer_type = { +const struct device_type tb_retimer_type = { .name = "thunderbolt_retimer", .groups = retimer_groups, .release = tb_retimer_release, diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index fad40c4bc7103..6ffc4e81ffed7 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -676,6 +676,13 @@ int tb_port_disable(struct tb_port *port) return __tb_port_enable(port, false); } +static int tb_port_reset(struct tb_port *port) +{ + if (tb_switch_is_usb4(port->sw)) + return port->cap_usb4 ? usb4_port_reset(port) : 0; + return tb_lc_reset_port(port); +} + /* * tb_init_port() - initialize a port * @@ -771,7 +778,7 @@ static int tb_port_alloc_hopid(struct tb_port *port, bool in, int min_hopid, if (max_hopid < 0 || max_hopid > port_max_hopid) max_hopid = port_max_hopid; - return ida_simple_get(ida, min_hopid, max_hopid + 1, GFP_KERNEL); + return ida_alloc_range(ida, min_hopid, max_hopid, GFP_KERNEL); } /** @@ -809,7 +816,7 @@ int tb_port_alloc_out_hopid(struct tb_port *port, int min_hopid, int max_hopid) */ void tb_port_release_in_hopid(struct tb_port *port, int hopid) { - ida_simple_remove(&port->in_hopids, hopid); + ida_free(&port->in_hopids, hopid); } /** @@ -819,7 +826,7 @@ void tb_port_release_in_hopid(struct tb_port *port, int hopid) */ void tb_port_release_out_hopid(struct tb_port *port, int hopid) { - ida_simple_remove(&port->out_hopids, hopid); + ida_free(&port->out_hopids, hopid); } static inline bool tb_switch_is_reachable(const struct tb_switch *parent, @@ -1120,7 +1127,7 @@ int tb_port_lane_bonding_enable(struct tb_port *port) ret = tb_port_set_link_width(port->dual_link_port, TB_LINK_WIDTH_DUAL); if (ret) - goto err_lane0; + goto err_lane1; } /* @@ -1534,29 +1541,124 @@ static void tb_dump_switch(const struct tb *tb, const struct tb_switch *sw) regs->__unknown1, regs->__unknown4); } +static int tb_switch_reset_host(struct tb_switch *sw) +{ + if (sw->generation > 1) { + struct tb_port *port; + + tb_switch_for_each_port(sw, port) { + int i, ret; + + /* + * For lane adapters we issue downstream port + * reset and clear up path config spaces. + * + * For protocol adapters we disable the path and + * clear path config space one by one (from 8 to + * Max Input HopID of the adapter). + */ + if (tb_port_is_null(port) && !tb_is_upstream_port(port)) { + ret = tb_port_reset(port); + if (ret) + return ret; + } else if (tb_port_is_usb3_down(port) || + tb_port_is_usb3_up(port)) { + tb_usb3_port_enable(port, false); + } else if (tb_port_is_dpin(port) || + tb_port_is_dpout(port)) { + tb_dp_port_enable(port, false); + } else if (tb_port_is_pcie_down(port) || + tb_port_is_pcie_up(port)) { + tb_pci_port_enable(port, false); + } else { + continue; + } + + /* Cleanup path config space of protocol adapter */ + for (i = TB_PATH_MIN_HOPID; + i <= port->config.max_in_hop_id; i++) { + ret = tb_path_deactivate_hop(port, i); + if (ret) + return ret; + } + } + } else { + struct tb_cfg_result res; + + /* Thunderbolt 1 uses the "reset" config space packet */ + res.err = tb_sw_write(sw, ((u32 *) &sw->config) + 2, + TB_CFG_SWITCH, 2, 2); + if (res.err) + return res.err; + res = tb_cfg_reset(sw->tb->ctl, tb_route(sw)); + if (res.err > 0) + return -EIO; + else if (res.err < 0) + return res.err; + } + + return 0; +} + +static int tb_switch_reset_device(struct tb_switch *sw) +{ + return tb_port_reset(tb_switch_downstream_port(sw)); +} + +static bool tb_switch_enumerated(struct tb_switch *sw) +{ + u32 val; + int ret; + + /* + * Read directly from the hardware because we use this also + * during system sleep where sw->config.enabled is already set + * by us. + */ + ret = tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_3, 1); + if (ret) + return false; + + return !!(val & ROUTER_CS_3_V); +} + /** - * tb_switch_reset() - reconfigure route, enable and send TB_CFG_PKG_RESET - * @sw: Switch to reset + * tb_switch_reset() - Perform reset to the router + * @sw: Router to reset * - * Return: Returns 0 on success or an error code on failure. + * Issues reset to the router @sw. Can be used for any router. For host + * routers, resets all the downstream ports and cleans up path config + * spaces accordingly. For device routers issues downstream port reset + * through the parent router, so as side effect there will be unplug + * soon after this is finished. + * + * If the router is not enumerated does nothing. + * + * Returns %0 on success or negative errno in case of failure. */ int tb_switch_reset(struct tb_switch *sw) { - struct tb_cfg_result res; + int ret; - if (sw->generation > 1) + /* + * We cannot access the port config spaces unless the router is + * already enumerated. If the router is not enumerated it is + * equal to being reset so we can skip that here. + */ + if (!tb_switch_enumerated(sw)) return 0; - tb_sw_dbg(sw, "resetting switch\n"); + tb_sw_dbg(sw, "resetting\n"); - res.err = tb_sw_write(sw, ((u32 *) &sw->config) + 2, - TB_CFG_SWITCH, 2, 2); - if (res.err) - return res.err; - res = tb_cfg_reset(sw->tb->ctl, tb_route(sw)); - if (res.err > 0) - return -EIO; - return res.err; + if (tb_route(sw)) + ret = tb_switch_reset_device(sw); + else + ret = tb_switch_reset_host(sw); + + if (ret) + tb_sw_warn(sw, "failed to reset\n"); + + return ret; } /** @@ -2228,7 +2330,7 @@ static const struct dev_pm_ops tb_switch_pm_ops = { NULL) }; -struct device_type tb_switch_type = { +const struct device_type tb_switch_type = { .name = "thunderbolt_device", .release = tb_switch_release, .uevent = tb_switch_uevent, diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index 846d2813bb1a5..c5ce7a694b27d 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -17,6 +17,7 @@ #include "tunnel.h" #define TB_TIMEOUT 100 /* ms */ +#define TB_RELEASE_BW_TIMEOUT 10000 /* ms */ /* * Minimum bandwidth (in Mb/s) that is needed in the single transmitter/receiver @@ -75,112 +76,6 @@ struct tb_hotplug_event { bool unplug; }; -static void tb_init_bandwidth_groups(struct tb_cm *tcm) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(tcm->groups); i++) { - struct tb_bandwidth_group *group = &tcm->groups[i]; - - group->tb = tcm_to_tb(tcm); - group->index = i + 1; - INIT_LIST_HEAD(&group->ports); - } -} - -static void tb_bandwidth_group_attach_port(struct tb_bandwidth_group *group, - struct tb_port *in) -{ - if (!group || WARN_ON(in->group)) - return; - - in->group = group; - list_add_tail(&in->group_list, &group->ports); - - tb_port_dbg(in, "attached to bandwidth group %d\n", group->index); -} - -static struct tb_bandwidth_group *tb_find_free_bandwidth_group(struct tb_cm *tcm) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(tcm->groups); i++) { - struct tb_bandwidth_group *group = &tcm->groups[i]; - - if (list_empty(&group->ports)) - return group; - } - - return NULL; -} - -static struct tb_bandwidth_group * -tb_attach_bandwidth_group(struct tb_cm *tcm, struct tb_port *in, - struct tb_port *out) -{ - struct tb_bandwidth_group *group; - struct tb_tunnel *tunnel; - - /* - * Find all DP tunnels that go through all the same USB4 links - * as this one. Because we always setup tunnels the same way we - * can just check for the routers at both ends of the tunnels - * and if they are the same we have a match. - */ - list_for_each_entry(tunnel, &tcm->tunnel_list, list) { - if (!tb_tunnel_is_dp(tunnel)) - continue; - - if (tunnel->src_port->sw == in->sw && - tunnel->dst_port->sw == out->sw) { - group = tunnel->src_port->group; - if (group) { - tb_bandwidth_group_attach_port(group, in); - return group; - } - } - } - - /* Pick up next available group then */ - group = tb_find_free_bandwidth_group(tcm); - if (group) - tb_bandwidth_group_attach_port(group, in); - else - tb_port_warn(in, "no available bandwidth groups\n"); - - return group; -} - -static void tb_discover_bandwidth_group(struct tb_cm *tcm, struct tb_port *in, - struct tb_port *out) -{ - if (usb4_dp_port_bandwidth_mode_enabled(in)) { - int index, i; - - index = usb4_dp_port_group_id(in); - for (i = 0; i < ARRAY_SIZE(tcm->groups); i++) { - if (tcm->groups[i].index == index) { - tb_bandwidth_group_attach_port(&tcm->groups[i], in); - return; - } - } - } - - tb_attach_bandwidth_group(tcm, in, out); -} - -static void tb_detach_bandwidth_group(struct tb_port *in) -{ - struct tb_bandwidth_group *group = in->group; - - if (group) { - in->group = NULL; - list_del_init(&in->group_list); - - tb_port_dbg(in, "detached from bandwidth group %d\n", group->index); - } -} - static void tb_handle_hotplug(struct work_struct *work); static void tb_queue_hotplug(struct tb *tb, u64 route, u8 port, bool unplug) @@ -472,34 +367,6 @@ static void tb_switch_discover_tunnels(struct tb_switch *sw, } } -static void tb_discover_tunnels(struct tb *tb) -{ - struct tb_cm *tcm = tb_priv(tb); - struct tb_tunnel *tunnel; - - tb_switch_discover_tunnels(tb->root_switch, &tcm->tunnel_list, true); - - list_for_each_entry(tunnel, &tcm->tunnel_list, list) { - if (tb_tunnel_is_pci(tunnel)) { - struct tb_switch *parent = tunnel->dst_port->sw; - - while (parent != tunnel->src_port->sw) { - parent->boot = true; - parent = tb_switch_parent(parent); - } - } else if (tb_tunnel_is_dp(tunnel)) { - struct tb_port *in = tunnel->src_port; - struct tb_port *out = tunnel->dst_port; - - /* Keep the domain from powering down */ - pm_runtime_get_sync(&in->sw->dev); - pm_runtime_get_sync(&out->sw->dev); - - tb_discover_bandwidth_group(tcm, in, out); - } - } -} - static int tb_port_configure_xdomain(struct tb_port *port, struct tb_xdomain *xd) { if (tb_switch_is_usb4(port->sw)) @@ -681,6 +548,10 @@ static int tb_consumed_usb3_pcie_bandwidth(struct tb *tb, * Calculates consumed DP bandwidth at @port between path from @src_port * to @dst_port. Does not take tunnel starting from @src_port and ending * from @src_port into account. + * + * If there is bandwidth reserved for any of the groups between + * @src_port and @dst_port (but not yet used) that is also taken into + * account in the returned consumed bandwidth. */ static int tb_consumed_dp_bandwidth(struct tb *tb, struct tb_port *src_port, @@ -689,9 +560,11 @@ static int tb_consumed_dp_bandwidth(struct tb *tb, int *consumed_up, int *consumed_down) { + int group_reserved[MAX_GROUPS] = {}; struct tb_cm *tcm = tb_priv(tb); struct tb_tunnel *tunnel; - int ret; + bool downstream; + int i, ret; *consumed_up = *consumed_down = 0; @@ -700,6 +573,7 @@ static int tb_consumed_dp_bandwidth(struct tb *tb, * their consumed bandwidth from the available. */ list_for_each_entry(tunnel, &tcm->tunnel_list, list) { + const struct tb_bandwidth_group *group; int dp_consumed_up, dp_consumed_down; if (tb_tunnel_is_invalid(tunnel)) @@ -712,6 +586,15 @@ static int tb_consumed_dp_bandwidth(struct tb *tb, continue; /* + * Calculate what is reserved for groups crossing the + * same ports only once (as that is reserved for all the + * tunnels in the group). + */ + group = tunnel->src_port->group; + if (group && group->reserved && !group_reserved[group->index]) + group_reserved[group->index] = group->reserved; + + /* * Ignore the DP tunnel between src_port and dst_port * because it is the same tunnel and we may be * re-calculating estimated bandwidth. @@ -729,6 +612,14 @@ static int tb_consumed_dp_bandwidth(struct tb *tb, *consumed_down += dp_consumed_down; } + downstream = tb_port_path_direction_downstream(src_port, dst_port); + for (i = 0; i < ARRAY_SIZE(group_reserved); i++) { + if (downstream) + *consumed_down += group_reserved[i]; + else + *consumed_up += group_reserved[i]; + } + return 0; } @@ -1181,8 +1072,6 @@ static int tb_configure_asym(struct tb *tb, struct tb_port *src_port, * @tb: Domain structure * @src_port: Source adapter to start the transition * @dst_port: Destination adapter - * @requested_up: New lower bandwidth request upstream (Mb/s) - * @requested_down: New lower bandwidth request downstream (Mb/s) * @keep_asym: Keep asymmetric link if preferred * * Goes over each link from @src_port to @dst_port and tries to @@ -1190,8 +1079,7 @@ static int tb_configure_asym(struct tb *tb, struct tb_port *src_port, * allows and link asymmetric preference is ignored (if @keep_asym is %false). */ static int tb_configure_sym(struct tb *tb, struct tb_port *src_port, - struct tb_port *dst_port, int requested_up, - int requested_down, bool keep_asym) + struct tb_port *dst_port, bool keep_asym) { bool clx = false, clx_disabled = false, downstream; struct tb_switch *sw; @@ -1230,10 +1118,10 @@ static int tb_configure_sym(struct tb *tb, struct tb_port *src_port, * guard band 10%) as the link was configured asymmetric * already. */ - if (consumed_down + requested_down >= asym_threshold) + if (consumed_down >= asym_threshold) continue; } else { - if (consumed_up + requested_up >= asym_threshold) + if (consumed_up >= asym_threshold) continue; } @@ -1306,7 +1194,7 @@ static void tb_configure_link(struct tb_port *down, struct tb_port *up, struct tb_port *host_port; host_port = tb_port_at(tb_route(sw), tb->root_switch); - tb_configure_sym(tb, host_port, up, 0, 0, false); + tb_configure_sym(tb, host_port, up, false); } /* Set the link configured */ @@ -1464,6 +1352,297 @@ out_rpm_put: } } +static void +tb_recalc_estimated_bandwidth_for_group(struct tb_bandwidth_group *group) +{ + struct tb_tunnel *first_tunnel; + struct tb *tb = group->tb; + struct tb_port *in; + int ret; + + tb_dbg(tb, "re-calculating bandwidth estimation for group %u\n", + group->index); + + first_tunnel = NULL; + list_for_each_entry(in, &group->ports, group_list) { + int estimated_bw, estimated_up, estimated_down; + struct tb_tunnel *tunnel; + struct tb_port *out; + + if (!usb4_dp_port_bandwidth_mode_enabled(in)) + continue; + + tunnel = tb_find_tunnel(tb, TB_TUNNEL_DP, in, NULL); + if (WARN_ON(!tunnel)) + break; + + if (!first_tunnel) { + /* + * Since USB3 bandwidth is shared by all DP + * tunnels under the host router USB4 port, even + * if they do not begin from the host router, we + * can release USB3 bandwidth just once and not + * for each tunnel separately. + */ + first_tunnel = tunnel; + ret = tb_release_unused_usb3_bandwidth(tb, + first_tunnel->src_port, first_tunnel->dst_port); + if (ret) { + tb_tunnel_warn(tunnel, + "failed to release unused bandwidth\n"); + break; + } + } + + out = tunnel->dst_port; + ret = tb_available_bandwidth(tb, in, out, &estimated_up, + &estimated_down, true); + if (ret) { + tb_tunnel_warn(tunnel, + "failed to re-calculate estimated bandwidth\n"); + break; + } + + /* + * Estimated bandwidth includes: + * - already allocated bandwidth for the DP tunnel + * - available bandwidth along the path + * - bandwidth allocated for USB 3.x but not used. + */ + if (tb_tunnel_direction_downstream(tunnel)) + estimated_bw = estimated_down; + else + estimated_bw = estimated_up; + + /* + * If there is reserved bandwidth for the group that is + * not yet released we report that too. + */ + tb_tunnel_dbg(tunnel, + "re-calculated estimated bandwidth %u (+ %u reserved) = %u Mb/s\n", + estimated_bw, group->reserved, + estimated_bw + group->reserved); + + if (usb4_dp_port_set_estimated_bandwidth(in, + estimated_bw + group->reserved)) + tb_tunnel_warn(tunnel, + "failed to update estimated bandwidth\n"); + } + + if (first_tunnel) + tb_reclaim_usb3_bandwidth(tb, first_tunnel->src_port, + first_tunnel->dst_port); + + tb_dbg(tb, "bandwidth estimation for group %u done\n", group->index); +} + +static void tb_recalc_estimated_bandwidth(struct tb *tb) +{ + struct tb_cm *tcm = tb_priv(tb); + int i; + + tb_dbg(tb, "bandwidth consumption changed, re-calculating estimated bandwidth\n"); + + for (i = 0; i < ARRAY_SIZE(tcm->groups); i++) { + struct tb_bandwidth_group *group = &tcm->groups[i]; + + if (!list_empty(&group->ports)) + tb_recalc_estimated_bandwidth_for_group(group); + } + + tb_dbg(tb, "bandwidth re-calculation done\n"); +} + +static bool __release_group_bandwidth(struct tb_bandwidth_group *group) +{ + if (group->reserved) { + tb_dbg(group->tb, "group %d released total %d Mb/s\n", group->index, + group->reserved); + group->reserved = 0; + return true; + } + return false; +} + +static void __configure_group_sym(struct tb_bandwidth_group *group) +{ + struct tb_tunnel *tunnel; + struct tb_port *in; + + if (list_empty(&group->ports)) + return; + + /* + * All the tunnels in the group go through the same USB4 links + * so we find the first one here and pass the IN and OUT + * adapters to tb_configure_sym() which now transitions the + * links back to symmetric if bandwidth requirement < asym_threshold. + * + * We do this here to avoid unnecessary transitions (for example + * if the graphics released bandwidth for other tunnel in the + * same group). + */ + in = list_first_entry(&group->ports, struct tb_port, group_list); + tunnel = tb_find_tunnel(group->tb, TB_TUNNEL_DP, in, NULL); + if (tunnel) + tb_configure_sym(group->tb, in, tunnel->dst_port, true); +} + +static void tb_bandwidth_group_release_work(struct work_struct *work) +{ + struct tb_bandwidth_group *group = + container_of(work, typeof(*group), release_work.work); + struct tb *tb = group->tb; + + mutex_lock(&tb->lock); + if (__release_group_bandwidth(group)) + tb_recalc_estimated_bandwidth(tb); + __configure_group_sym(group); + mutex_unlock(&tb->lock); +} + +static void tb_init_bandwidth_groups(struct tb_cm *tcm) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(tcm->groups); i++) { + struct tb_bandwidth_group *group = &tcm->groups[i]; + + group->tb = tcm_to_tb(tcm); + group->index = i + 1; + INIT_LIST_HEAD(&group->ports); + INIT_DELAYED_WORK(&group->release_work, + tb_bandwidth_group_release_work); + } +} + +static void tb_bandwidth_group_attach_port(struct tb_bandwidth_group *group, + struct tb_port *in) +{ + if (!group || WARN_ON(in->group)) + return; + + in->group = group; + list_add_tail(&in->group_list, &group->ports); + + tb_port_dbg(in, "attached to bandwidth group %d\n", group->index); +} + +static struct tb_bandwidth_group *tb_find_free_bandwidth_group(struct tb_cm *tcm) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(tcm->groups); i++) { + struct tb_bandwidth_group *group = &tcm->groups[i]; + + if (list_empty(&group->ports)) + return group; + } + + return NULL; +} + +static struct tb_bandwidth_group * +tb_attach_bandwidth_group(struct tb_cm *tcm, struct tb_port *in, + struct tb_port *out) +{ + struct tb_bandwidth_group *group; + struct tb_tunnel *tunnel; + + /* + * Find all DP tunnels that go through all the same USB4 links + * as this one. Because we always setup tunnels the same way we + * can just check for the routers at both ends of the tunnels + * and if they are the same we have a match. + */ + list_for_each_entry(tunnel, &tcm->tunnel_list, list) { + if (!tb_tunnel_is_dp(tunnel)) + continue; + + if (tunnel->src_port->sw == in->sw && + tunnel->dst_port->sw == out->sw) { + group = tunnel->src_port->group; + if (group) { + tb_bandwidth_group_attach_port(group, in); + return group; + } + } + } + + /* Pick up next available group then */ + group = tb_find_free_bandwidth_group(tcm); + if (group) + tb_bandwidth_group_attach_port(group, in); + else + tb_port_warn(in, "no available bandwidth groups\n"); + + return group; +} + +static void tb_discover_bandwidth_group(struct tb_cm *tcm, struct tb_port *in, + struct tb_port *out) +{ + if (usb4_dp_port_bandwidth_mode_enabled(in)) { + int index, i; + + index = usb4_dp_port_group_id(in); + for (i = 0; i < ARRAY_SIZE(tcm->groups); i++) { + if (tcm->groups[i].index == index) { + tb_bandwidth_group_attach_port(&tcm->groups[i], in); + return; + } + } + } + + tb_attach_bandwidth_group(tcm, in, out); +} + +static void tb_detach_bandwidth_group(struct tb_port *in) +{ + struct tb_bandwidth_group *group = in->group; + + if (group) { + in->group = NULL; + list_del_init(&in->group_list); + + tb_port_dbg(in, "detached from bandwidth group %d\n", group->index); + + /* No more tunnels so release the reserved bandwidth if any */ + if (list_empty(&group->ports)) { + cancel_delayed_work(&group->release_work); + __release_group_bandwidth(group); + } + } +} + +static void tb_discover_tunnels(struct tb *tb) +{ + struct tb_cm *tcm = tb_priv(tb); + struct tb_tunnel *tunnel; + + tb_switch_discover_tunnels(tb->root_switch, &tcm->tunnel_list, true); + + list_for_each_entry(tunnel, &tcm->tunnel_list, list) { + if (tb_tunnel_is_pci(tunnel)) { + struct tb_switch *parent = tunnel->dst_port->sw; + + while (parent != tunnel->src_port->sw) { + parent->boot = true; + parent = tb_switch_parent(parent); + } + } else if (tb_tunnel_is_dp(tunnel)) { + struct tb_port *in = tunnel->src_port; + struct tb_port *out = tunnel->dst_port; + + /* Keep the domain from powering down */ + pm_runtime_get_sync(&in->sw->dev); + pm_runtime_get_sync(&out->sw->dev); + + tb_discover_bandwidth_group(tcm, in, out); + } + } +} + static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel) { struct tb_port *src_port, *dst_port; @@ -1491,7 +1670,7 @@ static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel) * If bandwidth on a link is < asym_threshold * transition the link to symmetric. */ - tb_configure_sym(tb, src_port, dst_port, 0, 0, true); + tb_configure_sym(tb, src_port, dst_port, true); /* Now we can allow the domain to runtime suspend again */ pm_runtime_mark_last_busy(&dst_port->sw->dev); pm_runtime_put_autosuspend(&dst_port->sw->dev); @@ -1605,101 +1784,6 @@ out: return tb_find_unused_port(sw, TB_TYPE_PCIE_DOWN); } -static void -tb_recalc_estimated_bandwidth_for_group(struct tb_bandwidth_group *group) -{ - struct tb_tunnel *first_tunnel; - struct tb *tb = group->tb; - struct tb_port *in; - int ret; - - tb_dbg(tb, "re-calculating bandwidth estimation for group %u\n", - group->index); - - first_tunnel = NULL; - list_for_each_entry(in, &group->ports, group_list) { - int estimated_bw, estimated_up, estimated_down; - struct tb_tunnel *tunnel; - struct tb_port *out; - - if (!usb4_dp_port_bandwidth_mode_enabled(in)) - continue; - - tunnel = tb_find_tunnel(tb, TB_TUNNEL_DP, in, NULL); - if (WARN_ON(!tunnel)) - break; - - if (!first_tunnel) { - /* - * Since USB3 bandwidth is shared by all DP - * tunnels under the host router USB4 port, even - * if they do not begin from the host router, we - * can release USB3 bandwidth just once and not - * for each tunnel separately. - */ - first_tunnel = tunnel; - ret = tb_release_unused_usb3_bandwidth(tb, - first_tunnel->src_port, first_tunnel->dst_port); - if (ret) { - tb_tunnel_warn(tunnel, - "failed to release unused bandwidth\n"); - break; - } - } - - out = tunnel->dst_port; - ret = tb_available_bandwidth(tb, in, out, &estimated_up, - &estimated_down, true); - if (ret) { - tb_tunnel_warn(tunnel, - "failed to re-calculate estimated bandwidth\n"); - break; - } - - /* - * Estimated bandwidth includes: - * - already allocated bandwidth for the DP tunnel - * - available bandwidth along the path - * - bandwidth allocated for USB 3.x but not used. - */ - tb_tunnel_dbg(tunnel, - "re-calculated estimated bandwidth %u/%u Mb/s\n", - estimated_up, estimated_down); - - if (tb_port_path_direction_downstream(in, out)) - estimated_bw = estimated_down; - else - estimated_bw = estimated_up; - - if (usb4_dp_port_set_estimated_bandwidth(in, estimated_bw)) - tb_tunnel_warn(tunnel, - "failed to update estimated bandwidth\n"); - } - - if (first_tunnel) - tb_reclaim_usb3_bandwidth(tb, first_tunnel->src_port, - first_tunnel->dst_port); - - tb_dbg(tb, "bandwidth estimation for group %u done\n", group->index); -} - -static void tb_recalc_estimated_bandwidth(struct tb *tb) -{ - struct tb_cm *tcm = tb_priv(tb); - int i; - - tb_dbg(tb, "bandwidth consumption changed, re-calculating estimated bandwidth\n"); - - for (i = 0; i < ARRAY_SIZE(tcm->groups); i++) { - struct tb_bandwidth_group *group = &tcm->groups[i]; - - if (!list_empty(&group->ports)) - tb_recalc_estimated_bandwidth_for_group(group); - } - - tb_dbg(tb, "bandwidth re-calculation done\n"); -} - static struct tb_port *tb_find_dp_out(struct tb *tb, struct tb_port *in) { struct tb_port *host_port, *port; @@ -1737,49 +1821,15 @@ static struct tb_port *tb_find_dp_out(struct tb *tb, struct tb_port *in) return NULL; } -static bool tb_tunnel_one_dp(struct tb *tb) +static bool tb_tunnel_one_dp(struct tb *tb, struct tb_port *in, + struct tb_port *out) { int available_up, available_down, ret, link_nr; struct tb_cm *tcm = tb_priv(tb); - struct tb_port *port, *in, *out; int consumed_up, consumed_down; struct tb_tunnel *tunnel; /* - * Find pair of inactive DP IN and DP OUT adapters and then - * establish a DP tunnel between them. - */ - tb_dbg(tb, "looking for DP IN <-> DP OUT pairs:\n"); - - in = NULL; - out = NULL; - list_for_each_entry(port, &tcm->dp_resources, list) { - if (!tb_port_is_dpin(port)) - continue; - - if (tb_port_is_enabled(port)) { - tb_port_dbg(port, "DP IN in use\n"); - continue; - } - - in = port; - tb_port_dbg(in, "DP IN available\n"); - - out = tb_find_dp_out(tb, port); - if (out) - break; - } - - if (!in) { - tb_dbg(tb, "no suitable DP IN adapter available, not tunneling\n"); - return false; - } - if (!out) { - tb_dbg(tb, "no suitable DP OUT adapter available, not tunneling\n"); - return false; - } - - /* * This is only applicable to links that are not bonded (so * when Thunderbolt 1 hardware is involved somewhere in the * topology). For these try to share the DP bandwidth between @@ -1839,15 +1889,19 @@ static bool tb_tunnel_one_dp(struct tb *tb) goto err_free; } + /* If fail reading tunnel's consumed bandwidth, tear it down */ + ret = tb_tunnel_consumed_bandwidth(tunnel, &consumed_up, &consumed_down); + if (ret) + goto err_deactivate; + list_add_tail(&tunnel->list, &tcm->tunnel_list); - tb_reclaim_usb3_bandwidth(tb, in, out); + tb_reclaim_usb3_bandwidth(tb, in, out); /* * Transition the links to asymmetric if the consumption exceeds * the threshold. */ - if (!tb_tunnel_consumed_bandwidth(tunnel, &consumed_up, &consumed_down)) - tb_configure_asym(tb, in, out, consumed_up, consumed_down); + tb_configure_asym(tb, in, out, consumed_up, consumed_down); /* Update the domain with the new bandwidth estimation */ tb_recalc_estimated_bandwidth(tb); @@ -1859,6 +1913,8 @@ static bool tb_tunnel_one_dp(struct tb *tb) tb_increase_tmu_accuracy(tunnel); return true; +err_deactivate: + tb_tunnel_deactivate(tunnel); err_free: tb_tunnel_free(tunnel); err_reclaim_usb: @@ -1878,13 +1934,86 @@ err_rpm_put: static void tb_tunnel_dp(struct tb *tb) { + struct tb_cm *tcm = tb_priv(tb); + struct tb_port *port, *in, *out; + if (!tb_acpi_may_tunnel_dp()) { tb_dbg(tb, "DP tunneling disabled, not creating tunnel\n"); return; } - while (tb_tunnel_one_dp(tb)) - ; + /* + * Find pair of inactive DP IN and DP OUT adapters and then + * establish a DP tunnel between them. + */ + tb_dbg(tb, "looking for DP IN <-> DP OUT pairs:\n"); + + in = NULL; + out = NULL; + list_for_each_entry(port, &tcm->dp_resources, list) { + if (!tb_port_is_dpin(port)) + continue; + + if (tb_port_is_enabled(port)) { + tb_port_dbg(port, "DP IN in use\n"); + continue; + } + + in = port; + tb_port_dbg(in, "DP IN available\n"); + + out = tb_find_dp_out(tb, port); + if (out) + tb_tunnel_one_dp(tb, in, out); + else + tb_port_dbg(in, "no suitable DP OUT adapter available, not tunneling\n"); + } + + if (!in) + tb_dbg(tb, "no suitable DP IN adapter available, not tunneling\n"); +} + +static void tb_enter_redrive(struct tb_port *port) +{ + struct tb_switch *sw = port->sw; + + if (!(sw->quirks & QUIRK_KEEP_POWER_IN_DP_REDRIVE)) + return; + + /* + * If we get hot-unplug for the DP IN port of the host router + * and the DP resource is not available anymore it means there + * is a monitor connected directly to the Type-C port and we are + * in "redrive" mode. For this to work we cannot enter RTD3 so + * we bump up the runtime PM reference count here. + */ + if (!tb_port_is_dpin(port)) + return; + if (tb_route(sw)) + return; + if (!tb_switch_query_dp_resource(sw, port)) { + port->redrive = true; + pm_runtime_get(&sw->dev); + tb_port_dbg(port, "enter redrive mode, keeping powered\n"); + } +} + +static void tb_exit_redrive(struct tb_port *port) +{ + struct tb_switch *sw = port->sw; + + if (!(sw->quirks & QUIRK_KEEP_POWER_IN_DP_REDRIVE)) + return; + + if (!tb_port_is_dpin(port)) + return; + if (tb_route(sw)) + return; + if (port->redrive && tb_switch_query_dp_resource(sw, port)) { + port->redrive = false; + pm_runtime_put(&sw->dev); + tb_port_dbg(port, "exit redrive mode\n"); + } } static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port) @@ -1903,7 +2032,10 @@ static void tb_dp_resource_unavailable(struct tb *tb, struct tb_port *port) } tunnel = tb_find_tunnel(tb, TB_TUNNEL_DP, in, out); - tb_deactivate_and_free_tunnel(tunnel); + if (tunnel) + tb_deactivate_and_free_tunnel(tunnel); + else + tb_enter_redrive(port); list_del_init(&port->list); /* @@ -1930,6 +2062,7 @@ static void tb_dp_resource_available(struct tb *tb, struct tb_port *port) tb_port_dbg(port, "DP %s resource available after hotplug\n", tb_port_is_dpin(port) ? "IN" : "OUT"); list_add_tail(&port->list, &tcm->dp_resources); + tb_exit_redrive(port); /* Look for suitable DP IN <-> DP OUT pairs now */ tb_tunnel_dp(tb); @@ -2243,8 +2376,10 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up, int allocated_up, allocated_down, available_up, available_down, ret; int requested_up_corrected, requested_down_corrected, granularity; int max_up, max_down, max_up_rounded, max_down_rounded; + struct tb_bandwidth_group *group; struct tb *tb = tunnel->tb; struct tb_port *in, *out; + bool downstream; ret = tb_tunnel_allocated_bandwidth(tunnel, &allocated_up, &allocated_down); if (ret) @@ -2270,11 +2405,11 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up, */ ret = tb_tunnel_maximum_bandwidth(tunnel, &max_up, &max_down); if (ret) - return ret; + goto fail; ret = usb4_dp_port_granularity(in); if (ret < 0) - return ret; + goto fail; granularity = ret; max_up_rounded = roundup(max_up, granularity); @@ -2304,24 +2439,48 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up, "bandwidth request too high (%d/%d Mb/s > %d/%d Mb/s)\n", requested_up_corrected, requested_down_corrected, max_up_rounded, max_down_rounded); - return -ENOBUFS; + ret = -ENOBUFS; + goto fail; } + downstream = tb_tunnel_direction_downstream(tunnel); + group = in->group; + if ((*requested_up >= 0 && requested_up_corrected <= allocated_up) || (*requested_down >= 0 && requested_down_corrected <= allocated_down)) { - /* - * If bandwidth on a link is < asym_threshold transition - * the link to symmetric. - */ - tb_configure_sym(tb, in, out, *requested_up, *requested_down, true); - /* - * If requested bandwidth is less or equal than what is - * currently allocated to that tunnel we simply change - * the reservation of the tunnel. Since all the tunnels - * going out from the same USB4 port are in the same - * group the released bandwidth will be taken into - * account for the other tunnels automatically below. - */ + if (tunnel->bw_mode) { + int reserved; + /* + * If requested bandwidth is less or equal than + * what is currently allocated to that tunnel we + * simply change the reservation of the tunnel + * and add the released bandwidth for the group + * for the next 10s. Then we release it for + * others to use. + */ + if (downstream) + reserved = allocated_down - *requested_down; + else + reserved = allocated_up - *requested_up; + + if (reserved > 0) { + group->reserved += reserved; + tb_dbg(tb, "group %d reserved %d total %d Mb/s\n", + group->index, reserved, group->reserved); + + /* + * If it was not already pending, + * schedule release now. If it is then + * postpone it for the next 10s (unless + * it is already running in which case + * the 10s already expired and we should + * give the reserved back to others). + */ + mod_delayed_work(system_wq, &group->release_work, + msecs_to_jiffies(TB_RELEASE_BW_TIMEOUT)); + } + } + return tb_tunnel_alloc_bandwidth(tunnel, requested_up, requested_down); } @@ -2332,7 +2491,7 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up, */ ret = tb_release_unused_usb3_bandwidth(tb, in, out); if (ret) - return ret; + goto fail; /* * Then go over all tunnels that cross the same USB4 ports (they @@ -2344,11 +2503,15 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up, if (ret) goto reclaim; - tb_tunnel_dbg(tunnel, "bandwidth available for allocation %d/%d Mb/s\n", - available_up, available_down); + tb_tunnel_dbg(tunnel, "bandwidth available for allocation %d/%d (+ %u reserved) Mb/s\n", + available_up, available_down, group->reserved); + + if ((*requested_up >= 0 && + available_up + group->reserved >= requested_up_corrected) || + (*requested_down >= 0 && + available_down + group->reserved >= requested_down_corrected)) { + int released = 0; - if ((*requested_up >= 0 && available_up >= requested_up_corrected) || - (*requested_down >= 0 && available_down >= requested_down_corrected)) { /* * If bandwidth on a link is >= asym_threshold * transition the link to asymmetric. @@ -2356,15 +2519,28 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up, ret = tb_configure_asym(tb, in, out, *requested_up, *requested_down); if (ret) { - tb_configure_sym(tb, in, out, 0, 0, true); - return ret; + tb_configure_sym(tb, in, out, true); + goto fail; } ret = tb_tunnel_alloc_bandwidth(tunnel, requested_up, requested_down); if (ret) { tb_tunnel_warn(tunnel, "failed to allocate bandwidth\n"); - tb_configure_sym(tb, in, out, 0, 0, true); + tb_configure_sym(tb, in, out, true); + } + + if (downstream) { + if (*requested_down > available_down) + released = *requested_down - available_down; + } else { + if (*requested_up > available_up) + released = *requested_up - available_up; + } + if (released) { + group->reserved -= released; + tb_dbg(tb, "group %d released %d total %d Mb/s\n", + group->index, released, group->reserved); } } else { ret = -ENOBUFS; @@ -2372,6 +2548,18 @@ static int tb_alloc_dp_bandwidth(struct tb_tunnel *tunnel, int *requested_up, reclaim: tb_reclaim_usb3_bandwidth(tb, in, out); +fail: + if (ret && ret != -ENODEV) { + /* + * Write back the same allocated (so no change), this + * makes the DPTX request fail on graphics side. + */ + tb_tunnel_dbg(tunnel, + "failing the request by rewriting allocated %d/%d Mb/s\n", + allocated_up, allocated_down); + tb_tunnel_alloc_bandwidth(tunnel, &allocated_up, &allocated_down); + } + return ret; } @@ -2379,11 +2567,11 @@ static void tb_handle_dp_bandwidth_request(struct work_struct *work) { struct tb_hotplug_event *ev = container_of(work, typeof(*ev), work); int requested_bw, requested_up, requested_down, ret; - struct tb_port *in, *out; struct tb_tunnel *tunnel; struct tb *tb = ev->tb; struct tb_cm *tcm = tb_priv(tb); struct tb_switch *sw; + struct tb_port *in; pm_runtime_get_sync(&tb->dev); @@ -2406,32 +2594,48 @@ static void tb_handle_dp_bandwidth_request(struct work_struct *work) tb_port_dbg(in, "handling bandwidth allocation request\n"); + tunnel = tb_find_tunnel(tb, TB_TUNNEL_DP, in, NULL); + if (!tunnel) { + tb_port_warn(in, "failed to find tunnel\n"); + goto put_sw; + } + if (!usb4_dp_port_bandwidth_mode_enabled(in)) { - tb_port_warn(in, "bandwidth allocation mode not enabled\n"); + if (tunnel->bw_mode) { + /* + * Reset the tunnel back to use the legacy + * allocation. + */ + tunnel->bw_mode = false; + tb_port_dbg(in, "DPTX disabled bandwidth allocation mode\n"); + } else { + tb_port_warn(in, "bandwidth allocation mode not enabled\n"); + } goto put_sw; } ret = usb4_dp_port_requested_bandwidth(in); if (ret < 0) { - if (ret == -ENODATA) - tb_port_dbg(in, "no bandwidth request active\n"); - else + if (ret == -ENODATA) { + /* + * There is no request active so this means the + * BW allocation mode was enabled from graphics + * side. At this point we know that the graphics + * driver has read the DRPX capabilities so we + * can offer an better bandwidth estimatation. + */ + tb_port_dbg(in, "DPTX enabled bandwidth allocation mode, updating estimated bandwidth\n"); + tb_recalc_estimated_bandwidth(tb); + } else { tb_port_warn(in, "failed to read requested bandwidth\n"); + } goto put_sw; } requested_bw = ret; tb_port_dbg(in, "requested bandwidth %d Mb/s\n", requested_bw); - tunnel = tb_find_tunnel(tb, TB_TUNNEL_DP, in, NULL); - if (!tunnel) { - tb_port_warn(in, "failed to find tunnel\n"); - goto put_sw; - } - - out = tunnel->dst_port; - - if (tb_port_path_direction_downstream(in, out)) { + if (tb_tunnel_direction_downstream(tunnel)) { requested_up = -1; requested_down = requested_bw; } else { @@ -2560,6 +2764,16 @@ static void tb_stop(struct tb *tb) tcm->hotplug_active = false; /* signal tb_handle_hotplug to quit */ } +static void tb_deinit(struct tb *tb) +{ + struct tb_cm *tcm = tb_priv(tb); + int i; + + /* Cancel all the release bandwidth workers */ + for (i = 0; i < ARRAY_SIZE(tcm->groups); i++) + cancel_delayed_work_sync(&tcm->groups[i].release_work); +} + static int tb_scan_finalize_switch(struct device *dev, void *data) { if (tb_is_switch(dev)) { @@ -2581,9 +2795,10 @@ static int tb_scan_finalize_switch(struct device *dev, void *data) return 0; } -static int tb_start(struct tb *tb) +static int tb_start(struct tb *tb, bool reset) { struct tb_cm *tcm = tb_priv(tb); + bool discover = true; int ret; tb->root_switch = tb_switch_alloc(tb, &tb->dev, 0); @@ -2622,12 +2837,28 @@ static int tb_start(struct tb *tb) tb_switch_tmu_configure(tb->root_switch, TB_SWITCH_TMU_MODE_LOWRES); /* Enable TMU if it is off */ tb_switch_tmu_enable(tb->root_switch); - /* Full scan to discover devices added before the driver was loaded. */ - tb_scan_switch(tb->root_switch); - /* Find out tunnels created by the boot firmware */ - tb_discover_tunnels(tb); - /* Add DP resources from the DP tunnels created by the boot firmware */ - tb_discover_dp_resources(tb); + + /* + * Boot firmware might have created tunnels of its own. Since we + * cannot be sure they are usable for us, tear them down and + * reset the ports to handle it as new hotplug for USB4 v1 + * routers (for USB4 v2 and beyond we already do host reset). + */ + if (reset && tb_switch_is_usb4(tb->root_switch)) { + discover = false; + if (usb4_switch_version(tb->root_switch) == 1) + tb_switch_reset(tb->root_switch); + } + + if (discover) { + /* Full scan to discover devices added before the driver was loaded. */ + tb_scan_switch(tb->root_switch); + /* Find out tunnels created by the boot firmware */ + tb_discover_tunnels(tb); + /* Add DP resources from the DP tunnels created by the boot firmware */ + tb_discover_dp_resources(tb); + } + /* * If the boot firmware did not create USB 3.x tunnels create them * now for the whole topology. @@ -2698,8 +2929,12 @@ static int tb_resume_noirq(struct tb *tb) tb_dbg(tb, "resuming...\n"); - /* remove any pci devices the firmware might have setup */ - tb_switch_reset(tb->root_switch); + /* + * For non-USB4 hosts (Apple systems) remove any PCIe devices + * the firmware might have setup. + */ + if (!tb_switch_is_usb4(tb->root_switch)) + tb_switch_reset(tb->root_switch); tb_switch_resume(tb->root_switch); tb_free_invalid_tunnels(tb); @@ -2847,6 +3082,7 @@ static int tb_runtime_resume(struct tb *tb) static const struct tb_cm_ops tb_cm_ops = { .start = tb_start, .stop = tb_stop, + .deinit = tb_deinit, .suspend_noirq = tb_suspend_noirq, .resume_noirq = tb_resume_noirq, .freeze_noirq = tb_freeze_noirq, diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index 997c5a5369052..feed8ecaf712e 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -23,6 +23,8 @@ #define QUIRK_FORCE_POWER_LINK_CONTROLLER BIT(0) /* Disable CLx if not supported */ #define QUIRK_NO_CLX BIT(1) +/* Need to keep power on while USB4 port is in redrive mode */ +#define QUIRK_KEEP_POWER_IN_DP_REDRIVE BIT(2) /** * struct tb_nvm - Structure holding NVM information @@ -217,6 +219,11 @@ struct tb_switch { * @tb: Pointer to the domain the group belongs to * @index: Index of the group (aka Group_ID). Valid values %1-%7 * @ports: DP IN adapters belonging to this group are linked here + * @reserved: Bandwidth released by one tunnel in the group, available + * to others. This is reported as part of estimated_bw for + * the group. + * @release_work: Worker to release the @reserved if it is not used by + * any of the tunnels. * * Any tunnel that requires isochronous bandwidth (that's DP for now) is * attached to a bandwidth group. All tunnels going through the same @@ -227,6 +234,8 @@ struct tb_bandwidth_group { struct tb *tb; int index; struct list_head ports; + int reserved; + struct delayed_work release_work; }; /** @@ -258,6 +267,7 @@ struct tb_bandwidth_group { * @group_list: The adapter is linked to the group's list of ports through this * @max_bw: Maximum possible bandwidth through this adapter if set to * non-zero. + * @redrive: For DP IN, if true the adapter is in redrive mode. * * In USB4 terminology this structure represents an adapter (protocol or * lane adapter). @@ -286,6 +296,7 @@ struct tb_port { struct tb_bandwidth_group *group; struct list_head group_list; unsigned int max_bw; + bool redrive; }; /** @@ -452,6 +463,8 @@ struct tb_path { * ICM to send driver ready message to the firmware. * @start: Starts the domain * @stop: Stops the domain + * @deinit: Perform any cleanup after the domain is stopped but before + * it is unregistered. Called without @tb->lock taken. Optional. * @suspend_noirq: Connection manager specific suspend_noirq * @resume_noirq: Connection manager specific resume_noirq * @suspend: Connection manager specific suspend @@ -483,8 +496,9 @@ struct tb_path { */ struct tb_cm_ops { int (*driver_ready)(struct tb *tb); - int (*start)(struct tb *tb); + int (*start)(struct tb *tb, bool reset); void (*stop)(struct tb *tb); + void (*deinit)(struct tb *tb); int (*suspend_noirq)(struct tb *tb); int (*resume_noirq)(struct tb *tb); int (*suspend)(struct tb *tb); @@ -735,10 +749,10 @@ static inline int tb_port_write(struct tb_port *port, const void *buffer, struct tb *icm_probe(struct tb_nhi *nhi); struct tb *tb_probe(struct tb_nhi *nhi); -extern struct device_type tb_domain_type; -extern struct device_type tb_retimer_type; -extern struct device_type tb_switch_type; -extern struct device_type usb4_port_device_type; +extern const struct device_type tb_domain_type; +extern const struct device_type tb_retimer_type; +extern const struct device_type tb_switch_type; +extern const struct device_type usb4_port_device_type; int tb_domain_init(void); void tb_domain_exit(void); @@ -746,7 +760,7 @@ int tb_xdomain_init(void); void tb_xdomain_exit(void); struct tb *tb_domain_alloc(struct tb_nhi *nhi, int timeout_msec, size_t privsize); -int tb_domain_add(struct tb *tb); +int tb_domain_add(struct tb *tb, bool reset); void tb_domain_remove(struct tb *tb); int tb_domain_suspend_noirq(struct tb *tb); int tb_domain_resume_noirq(struct tb *tb); @@ -1150,6 +1164,7 @@ struct tb_path *tb_path_alloc(struct tb *tb, struct tb_port *src, int src_hopid, void tb_path_free(struct tb_path *path); int tb_path_activate(struct tb_path *path); void tb_path_deactivate(struct tb_path *path); +int tb_path_deactivate_hop(struct tb_port *port, int hop_index); bool tb_path_is_invalid(struct tb_path *path); bool tb_path_port_on_path(const struct tb_path *path, const struct tb_port *port); @@ -1169,6 +1184,7 @@ int tb_drom_read(struct tb_switch *sw); int tb_drom_read_uid_only(struct tb_switch *sw, u64 *uid); int tb_lc_read_uuid(struct tb_switch *sw, u32 *uuid); +int tb_lc_reset_port(struct tb_port *port); int tb_lc_configure_port(struct tb_port *port); void tb_lc_unconfigure_port(struct tb_port *port); int tb_lc_configure_xdomain(struct tb_port *port); @@ -1301,6 +1317,7 @@ void usb4_switch_remove_ports(struct tb_switch *sw); int usb4_port_unlock(struct tb_port *port); int usb4_port_hotplug_enable(struct tb_port *port); +int usb4_port_reset(struct tb_port *port); int usb4_port_configure(struct tb_port *port); void usb4_port_unconfigure(struct tb_port *port); int usb4_port_configure_xdomain(struct tb_port *port, struct tb_xdomain *xd); diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h index 6f798f6a2b848..4e43b47f9f119 100644 --- a/drivers/thunderbolt/tb_regs.h +++ b/drivers/thunderbolt/tb_regs.h @@ -194,6 +194,8 @@ struct tb_regs_switch_header { #define USB4_VERSION_MAJOR_MASK GENMASK(7, 5) #define ROUTER_CS_1 0x01 +#define ROUTER_CS_3 0x03 +#define ROUTER_CS_3_V BIT(31) #define ROUTER_CS_4 0x04 /* Used with the router cmuv field */ #define ROUTER_CS_4_CMUV_V1 0x10 @@ -389,6 +391,7 @@ struct tb_regs_port_header { #define PORT_CS_18_CSA BIT(22) #define PORT_CS_18_TIP BIT(24) #define PORT_CS_19 0x13 +#define PORT_CS_19_DPR BIT(0) #define PORT_CS_19_PC BIT(3) #define PORT_CS_19_PID BIT(4) #define PORT_CS_19_WOC BIT(16) @@ -584,6 +587,9 @@ struct tb_regs_hop { #define TB_LC_POWER 0x740 /* Link controller registers */ +#define TB_LC_PORT_MODE 0x26 +#define TB_LC_PORT_MODE_DPR BIT(0) + #define TB_LC_CS_42 0x2a #define TB_LC_CS_42_USB_PLUGGED BIT(31) diff --git a/drivers/thunderbolt/trace.h b/drivers/thunderbolt/trace.h new file mode 100644 index 0000000000000..4dccfcf7af6a3 --- /dev/null +++ b/drivers/thunderbolt/trace.h @@ -0,0 +1,188 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Thunderbolt tracing support + * + * Copyright (C) 2024, Intel Corporation + * Author: Mika Westerberg <mika.westerberg@linux.intel.com> + * Gil Fine <gil.fine@intel.com> + */ + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM thunderbolt + +#if !defined(TB_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ) +#define TB_TRACE_H_ + +#include <linux/trace_seq.h> +#include <linux/tracepoint.h> + +#include "tb_msgs.h" + +#define tb_cfg_type_name(type) { type, #type } +#define show_type_name(val) \ + __print_symbolic(val, \ + tb_cfg_type_name(TB_CFG_PKG_READ), \ + tb_cfg_type_name(TB_CFG_PKG_WRITE), \ + tb_cfg_type_name(TB_CFG_PKG_ERROR), \ + tb_cfg_type_name(TB_CFG_PKG_NOTIFY_ACK), \ + tb_cfg_type_name(TB_CFG_PKG_EVENT), \ + tb_cfg_type_name(TB_CFG_PKG_XDOMAIN_REQ), \ + tb_cfg_type_name(TB_CFG_PKG_XDOMAIN_RESP), \ + tb_cfg_type_name(TB_CFG_PKG_OVERRIDE), \ + tb_cfg_type_name(TB_CFG_PKG_RESET), \ + tb_cfg_type_name(TB_CFG_PKG_ICM_EVENT), \ + tb_cfg_type_name(TB_CFG_PKG_ICM_CMD), \ + tb_cfg_type_name(TB_CFG_PKG_ICM_RESP)) + +#ifndef TB_TRACE_HELPERS +#define TB_TRACE_HELPERS +static inline const char *show_data_read_write(struct trace_seq *p, + const u32 *data) +{ + const struct cfg_read_pkg *msg = (const struct cfg_read_pkg *)data; + const char *ret = trace_seq_buffer_ptr(p); + + trace_seq_printf(p, "offset=%#x, len=%u, port=%d, config=%#x, seq=%d, ", + msg->addr.offset, msg->addr.length, msg->addr.port, + msg->addr.space, msg->addr.seq); + + return ret; +} + +static inline const char *show_data_error(struct trace_seq *p, const u32 *data) +{ + const struct cfg_error_pkg *msg = (const struct cfg_error_pkg *)data; + const char *ret = trace_seq_buffer_ptr(p); + + trace_seq_printf(p, "error=%#x, port=%d, plug=%#x, ", msg->error, + msg->port, msg->pg); + + return ret; +} + +static inline const char *show_data_event(struct trace_seq *p, const u32 *data) +{ + const struct cfg_event_pkg *msg = (const struct cfg_event_pkg *)data; + const char *ret = trace_seq_buffer_ptr(p); + + trace_seq_printf(p, "port=%d, unplug=%#x, ", msg->port, msg->unplug); + + return ret; +} + +static inline const char *show_route(struct trace_seq *p, const u32 *data) +{ + const struct tb_cfg_header *header = (const struct tb_cfg_header *)data; + const char *ret = trace_seq_buffer_ptr(p); + + trace_seq_printf(p, "route=%llx, ", tb_cfg_get_route(header)); + + return ret; +} + +static inline const char *show_data(struct trace_seq *p, u8 type, + const u32 *data, u32 length) +{ + const char *ret = trace_seq_buffer_ptr(p); + const char *prefix = ""; + int i; + + show_route(p, data); + + switch (type) { + case TB_CFG_PKG_READ: + case TB_CFG_PKG_WRITE: + show_data_read_write(p, data); + break; + + case TB_CFG_PKG_ERROR: + show_data_error(p, data); + break; + + case TB_CFG_PKG_EVENT: + show_data_event(p, data); + break; + + default: + break; + } + + trace_seq_printf(p, "data=["); + for (i = 0; i < length; i++) { + trace_seq_printf(p, "%s0x%08x", prefix, data[i]); + prefix = ", "; + } + trace_seq_printf(p, "]"); + trace_seq_putc(p, 0); + + return ret; +} +#endif + +DECLARE_EVENT_CLASS(tb_raw, + TP_PROTO(int index, u8 type, const void *data, size_t size), + TP_ARGS(index, type, data, size), + TP_STRUCT__entry( + __field(int, index) + __field(u8, type) + __field(size_t, size) + __dynamic_array(u32, data, size / 4) + ), + TP_fast_assign( + __entry->index = index; + __entry->type = type; + __entry->size = size / 4; + memcpy(__get_dynamic_array(data), data, size); + ), + TP_printk("type=%s, size=%zd, domain=%d, %s", + show_type_name(__entry->type), __entry->size, __entry->index, + show_data(p, __entry->type, __get_dynamic_array(data), + __entry->size) + ) +); + +DEFINE_EVENT(tb_raw, tb_tx, + TP_PROTO(int index, u8 type, const void *data, size_t size), + TP_ARGS(index, type, data, size) +); + +DEFINE_EVENT(tb_raw, tb_event, + TP_PROTO(int index, u8 type, const void *data, size_t size), + TP_ARGS(index, type, data, size) +); + +TRACE_EVENT(tb_rx, + TP_PROTO(int index, u8 type, const void *data, size_t size, bool dropped), + TP_ARGS(index, type, data, size, dropped), + TP_STRUCT__entry( + __field(int, index) + __field(u8, type) + __field(size_t, size) + __dynamic_array(u32, data, size / 4) + __field(bool, dropped) + ), + TP_fast_assign( + __entry->index = index; + __entry->type = type; + __entry->size = size / 4; + memcpy(__get_dynamic_array(data), data, size); + __entry->dropped = dropped; + ), + TP_printk("type=%s, dropped=%u, size=%zd, domain=%d, %s", + show_type_name(__entry->type), __entry->dropped, + __entry->size, __entry->index, + show_data(p, __entry->type, __get_dynamic_array(data), + __entry->size) + ) +); + +#endif /* TB_TRACE_H_ */ + +#undef TRACE_INCLUDE_PATH +#define TRACE_INCLUDE_PATH . + +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_FILE trace + +/* This part must be outside protection */ +#include <trace/define_trace.h> diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c index 6fffb2c82d3d1..cb6609a56a03f 100644 --- a/drivers/thunderbolt/tunnel.c +++ b/drivers/thunderbolt/tunnel.c @@ -706,7 +706,7 @@ static int tb_dp_xchg_caps(struct tb_tunnel *tunnel) "DP OUT maximum supported bandwidth %u Mb/s x%u = %u Mb/s\n", out_rate, out_lanes, bw); - if (tb_port_path_direction_downstream(in, out)) + if (tb_tunnel_direction_downstream(tunnel)) max_bw = tunnel->max_down; else max_bw = tunnel->max_up; @@ -831,7 +831,7 @@ static int tb_dp_bandwidth_alloc_mode_enable(struct tb_tunnel *tunnel) * max_up/down fields. For discovery we just read what the * estimation was set to. */ - if (tb_port_path_direction_downstream(in, out)) + if (tb_tunnel_direction_downstream(tunnel)) estimated_bw = tunnel->max_down; else estimated_bw = tunnel->max_up; @@ -926,12 +926,18 @@ static int tb_dp_activate(struct tb_tunnel *tunnel, bool active) return 0; } -/* max_bw is rounded up to next granularity */ +/** + * tb_dp_bandwidth_mode_maximum_bandwidth() - Maximum possible bandwidth + * @tunnel: DP tunnel to check + * @max_bw_rounded: Maximum bandwidth in Mb/s rounded up to the next granularity + * + * Returns maximum possible bandwidth for this tunnel in Mb/s. + */ static int tb_dp_bandwidth_mode_maximum_bandwidth(struct tb_tunnel *tunnel, - int *max_bw) + int *max_bw_rounded) { struct tb_port *in = tunnel->src_port; - int ret, rate, lanes, nrd_bw; + int ret, rate, lanes, max_bw; u32 cap; /* @@ -947,41 +953,26 @@ static int tb_dp_bandwidth_mode_maximum_bandwidth(struct tb_tunnel *tunnel, return ret; rate = tb_dp_cap_get_rate_ext(cap); - if (tb_dp_is_uhbr_rate(rate)) { - /* - * When UHBR is used there is no reduction in lanes so - * we can use this directly. - */ - lanes = tb_dp_cap_get_lanes(cap); - } else { - /* - * If there is no UHBR supported then check the - * non-reduced rate and lanes. - */ - ret = usb4_dp_port_nrd(in, &rate, &lanes); - if (ret) - return ret; - } + lanes = tb_dp_cap_get_lanes(cap); - nrd_bw = tb_dp_bandwidth(rate, lanes); + max_bw = tb_dp_bandwidth(rate, lanes); - if (max_bw) { + if (max_bw_rounded) { ret = usb4_dp_port_granularity(in); if (ret < 0) return ret; - *max_bw = roundup(nrd_bw, ret); + *max_bw_rounded = roundup(max_bw, ret); } - return nrd_bw; + return max_bw; } static int tb_dp_bandwidth_mode_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, int *consumed_down) { - struct tb_port *out = tunnel->dst_port; struct tb_port *in = tunnel->src_port; - int ret, allocated_bw, max_bw; + int ret, allocated_bw, max_bw_rounded; if (!usb4_dp_port_bandwidth_mode_enabled(in)) return -EOPNOTSUPP; @@ -995,13 +986,13 @@ static int tb_dp_bandwidth_mode_consumed_bandwidth(struct tb_tunnel *tunnel, return ret; allocated_bw = ret; - ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw); + ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw_rounded); if (ret < 0) return ret; - if (allocated_bw == max_bw) + if (allocated_bw == max_bw_rounded) allocated_bw = ret; - if (tb_port_path_direction_downstream(in, out)) { + if (tb_tunnel_direction_downstream(tunnel)) { *consumed_up = 0; *consumed_down = allocated_bw; } else { @@ -1015,7 +1006,6 @@ static int tb_dp_bandwidth_mode_consumed_bandwidth(struct tb_tunnel *tunnel, static int tb_dp_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up, int *allocated_down) { - struct tb_port *out = tunnel->dst_port; struct tb_port *in = tunnel->src_port; /* @@ -1023,20 +1013,21 @@ static int tb_dp_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up * Otherwise we read it from the DPRX. */ if (usb4_dp_port_bandwidth_mode_enabled(in) && tunnel->bw_mode) { - int ret, allocated_bw, max_bw; + int ret, allocated_bw, max_bw_rounded; ret = usb4_dp_port_allocated_bandwidth(in); if (ret < 0) return ret; allocated_bw = ret; - ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw); + ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, + &max_bw_rounded); if (ret < 0) return ret; - if (allocated_bw == max_bw) + if (allocated_bw == max_bw_rounded) allocated_bw = ret; - if (tb_port_path_direction_downstream(in, out)) { + if (tb_tunnel_direction_downstream(tunnel)) { *allocated_up = 0; *allocated_down = allocated_bw; } else { @@ -1053,26 +1044,25 @@ static int tb_dp_allocated_bandwidth(struct tb_tunnel *tunnel, int *allocated_up static int tb_dp_alloc_bandwidth(struct tb_tunnel *tunnel, int *alloc_up, int *alloc_down) { - struct tb_port *out = tunnel->dst_port; struct tb_port *in = tunnel->src_port; - int max_bw, ret, tmp; + int max_bw_rounded, ret, tmp; if (!usb4_dp_port_bandwidth_mode_enabled(in)) return -EOPNOTSUPP; - ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw); + ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, &max_bw_rounded); if (ret < 0) return ret; - if (tb_port_path_direction_downstream(in, out)) { - tmp = min(*alloc_down, max_bw); + if (tb_tunnel_direction_downstream(tunnel)) { + tmp = min(*alloc_down, max_bw_rounded); ret = usb4_dp_port_allocate_bandwidth(in, tmp); if (ret) return ret; *alloc_down = tmp; *alloc_up = 0; } else { - tmp = min(*alloc_up, max_bw); + tmp = min(*alloc_up, max_bw_rounded); ret = usb4_dp_port_allocate_bandwidth(in, tmp); if (ret) return ret; @@ -1150,17 +1140,16 @@ static int tb_dp_read_cap(struct tb_tunnel *tunnel, unsigned int cap, u32 *rate, static int tb_dp_maximum_bandwidth(struct tb_tunnel *tunnel, int *max_up, int *max_down) { - struct tb_port *in = tunnel->src_port; int ret; - if (!usb4_dp_port_bandwidth_mode_enabled(in)) + if (!usb4_dp_port_bandwidth_mode_enabled(tunnel->src_port)) return -EOPNOTSUPP; ret = tb_dp_bandwidth_mode_maximum_bandwidth(tunnel, NULL); if (ret < 0) return ret; - if (tb_port_path_direction_downstream(in, tunnel->dst_port)) { + if (tb_tunnel_direction_downstream(tunnel)) { *max_up = 0; *max_down = ret; } else { @@ -1174,8 +1163,7 @@ static int tb_dp_maximum_bandwidth(struct tb_tunnel *tunnel, int *max_up, static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, int *consumed_down) { - struct tb_port *in = tunnel->src_port; - const struct tb_switch *sw = in->sw; + const struct tb_switch *sw = tunnel->src_port->sw; u32 rate = 0, lanes = 0; int ret; @@ -1196,17 +1184,13 @@ static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, /* * Then see if the DPRX negotiation is ready and if yes * return that bandwidth (it may be smaller than the - * reduced one). Otherwise return the remote (possibly - * reduced) caps. + * reduced one). According to VESA spec, the DPRX + * negotiation shall compete in 5 seconds after tunnel + * established. We give it 100ms extra just in case. */ - ret = tb_dp_wait_dprx(tunnel, 150); - if (ret) { - if (ret == -ETIMEDOUT) - ret = tb_dp_read_cap(tunnel, DP_REMOTE_CAP, - &rate, &lanes); - if (ret) - return ret; - } + ret = tb_dp_wait_dprx(tunnel, 5100); + if (ret) + return ret; ret = tb_dp_read_cap(tunnel, DP_COMMON_CAP, &rate, &lanes); if (ret) return ret; @@ -1221,7 +1205,7 @@ static int tb_dp_consumed_bandwidth(struct tb_tunnel *tunnel, int *consumed_up, return 0; } - if (tb_port_path_direction_downstream(in, tunnel->dst_port)) { + if (tb_tunnel_direction_downstream(tunnel)) { *consumed_up = 0; *consumed_down = tb_dp_bandwidth(rate, lanes); } else { diff --git a/drivers/thunderbolt/tunnel.h b/drivers/thunderbolt/tunnel.h index b4cff5482112d..1a27ccd08b861 100644 --- a/drivers/thunderbolt/tunnel.h +++ b/drivers/thunderbolt/tunnel.h @@ -139,6 +139,12 @@ static inline bool tb_tunnel_is_usb3(const struct tb_tunnel *tunnel) return tunnel->type == TB_TUNNEL_USB3; } +static inline bool tb_tunnel_direction_downstream(const struct tb_tunnel *tunnel) +{ + return tb_port_path_direction_downstream(tunnel->src_port, + tunnel->dst_port); +} + const char *tb_tunnel_type_name(const struct tb_tunnel *tunnel); #define __TB_TUNNEL_PRINT(level, tunnel, fmt, arg...) \ diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index 1515eff8cc3e2..9860b49d7a2b2 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -1113,6 +1113,45 @@ int usb4_port_hotplug_enable(struct tb_port *port) return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_5, 1); } +/** + * usb4_port_reset() - Issue downstream port reset + * @port: USB4 port to reset + * + * Issues downstream port reset to @port. + */ +int usb4_port_reset(struct tb_port *port) +{ + int ret; + u32 val; + + if (!port->cap_usb4) + return -EINVAL; + + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); + if (ret) + return ret; + + val |= PORT_CS_19_DPR; + + ret = tb_port_write(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); + if (ret) + return ret; + + fsleep(10000); + + ret = tb_port_read(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); + if (ret) + return ret; + + val &= ~PORT_CS_19_DPR; + + return tb_port_write(port, &val, TB_CFG_PORT, + port->cap_usb4 + PORT_CS_19, 1); +} + static int usb4_port_set_configured(struct tb_port *port, bool configured) { int ret; @@ -2819,8 +2858,10 @@ static int usb4_dp_port_wait_and_clear_cm_ack(struct tb_port *port, usleep_range(50, 100); } while (ktime_before(ktime_get(), end)); - if (val & ADP_DP_CS_8_DR) + if (val & ADP_DP_CS_8_DR) { + tb_port_warn(port, "timeout waiting for DPTX request to clear\n"); return -ETIMEDOUT; + } ret = tb_port_read(port, &val, TB_CFG_PORT, port->cap_adap + ADP_DP_CS_2, 1); diff --git a/drivers/thunderbolt/usb4_port.c b/drivers/thunderbolt/usb4_port.c index e355bfd6343ff..5150879888cac 100644 --- a/drivers/thunderbolt/usb4_port.c +++ b/drivers/thunderbolt/usb4_port.c @@ -243,7 +243,7 @@ static void usb4_port_device_release(struct device *dev) kfree(usb4); } -struct device_type usb4_port_device_type = { +const struct device_type usb4_port_device_type = { .name = "usb4_port", .groups = usb4_port_device_groups, .release = usb4_port_device_release, diff --git a/drivers/thunderbolt/xdomain.c b/drivers/thunderbolt/xdomain.c index 9495742913d5c..940ae97987ff3 100644 --- a/drivers/thunderbolt/xdomain.c +++ b/drivers/thunderbolt/xdomain.c @@ -997,12 +997,12 @@ static void tb_service_release(struct device *dev) struct tb_xdomain *xd = tb_service_parent(svc); tb_service_debugfs_remove(svc); - ida_simple_remove(&xd->service_ids, svc->id); + ida_free(&xd->service_ids, svc->id); kfree(svc->key); kfree(svc); } -struct device_type tb_service_type = { +const struct device_type tb_service_type = { .name = "thunderbolt_service", .groups = tb_service_attr_groups, .uevent = tb_service_uevent, @@ -1099,7 +1099,7 @@ static void enumerate_services(struct tb_xdomain *xd) break; } - id = ida_simple_get(&xd->service_ids, 0, 0, GFP_KERNEL); + id = ida_alloc(&xd->service_ids, GFP_KERNEL); if (id < 0) { kfree(svc->key); kfree(svc); @@ -1791,13 +1791,13 @@ static ssize_t rx_lanes_show(struct device *dev, struct device_attribute *attr, switch (xd->link_width) { case TB_LINK_WIDTH_SINGLE: - case TB_LINK_WIDTH_ASYM_RX: + case TB_LINK_WIDTH_ASYM_TX: width = 1; break; case TB_LINK_WIDTH_DUAL: width = 2; break; - case TB_LINK_WIDTH_ASYM_TX: + case TB_LINK_WIDTH_ASYM_RX: width = 3; break; default: @@ -1817,13 +1817,13 @@ static ssize_t tx_lanes_show(struct device *dev, struct device_attribute *attr, switch (xd->link_width) { case TB_LINK_WIDTH_SINGLE: - case TB_LINK_WIDTH_ASYM_TX: + case TB_LINK_WIDTH_ASYM_RX: width = 1; break; case TB_LINK_WIDTH_DUAL: width = 2; break; - case TB_LINK_WIDTH_ASYM_RX: + case TB_LINK_WIDTH_ASYM_TX: width = 3; break; default: @@ -1893,7 +1893,7 @@ static const struct dev_pm_ops tb_xdomain_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(tb_xdomain_suspend, tb_xdomain_resume) }; -struct device_type tb_xdomain_type = { +const struct device_type tb_xdomain_type = { .name = "thunderbolt_xdomain", .release = tb_xdomain_release, .pm = &tb_xdomain_pm_ops, diff --git a/drivers/usb/cdns3/drd.c b/drivers/usb/cdns3/drd.c index ee917f1b091c8..8b936a2e93a0d 100644 --- a/drivers/usb/cdns3/drd.c +++ b/drivers/usb/cdns3/drd.c @@ -435,7 +435,7 @@ int cdns_drd_init(struct cdns *cdns) writel(1, &cdns->otg_v1_regs->simulate); cdns->version = CDNS3_CONTROLLER_V1; } else { - dev_err(cdns->dev, "not supporte DID=0x%08x\n", state); + dev_err(cdns->dev, "not supported DID=0x%08x\n", state); return -EINVAL; } diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 351ede4b5de20..58e3ca7e47939 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -116,3 +116,30 @@ config USB_AUTOSUSPEND_DELAY The default value Linux has always had is 2 seconds. Change this value if you want a different delay and cannot modify the command line or module parameter. + +config USB_DEFAULT_AUTHORIZATION_MODE + int "Default authorization mode for USB devices" + range 0 2 + default 1 + depends on USB + help + Select the default USB device authorization mode. Can be overridden + with usbcore.authorized_default command line or module parameter. + + This option allows you to choose whether USB devices that are + connected to the system can be used by default, or if they are + locked down. + + With value 0 all connected USB devices with the exception of root + hub require user space authorization before they can be used. + + With value 1 (default) no user space authorization is required to + use connected USB devices. + + With value 2 all connected USB devices with exception of internal + USB devices require user space authorization before they can be + used. Note that in this mode the differentiation between internal + and external USB devices relies on ACPI, and on systems without + ACPI selecting value 2 is analogous to selecting value 0. + + If unsure, keep the default value. diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e01b1913d02bf..e02ba15f6e34f 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1710,9 +1710,7 @@ int usb_autoresume_device(struct usb_device *udev) { int status; - status = pm_runtime_get_sync(&udev->dev); - if (status < 0) - pm_runtime_put_sync(&udev->dev); + status = pm_runtime_resume_and_get(&udev->dev); dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&udev->dev.power.usage_count), status); @@ -1818,9 +1816,7 @@ int usb_autopm_get_interface(struct usb_interface *intf) { int status; - status = pm_runtime_get_sync(&intf->dev); - if (status < 0) - pm_runtime_put_sync(&intf->dev); + status = pm_runtime_resume_and_get(&intf->dev); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), status); diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index a2530811cf7de..4b38b87a13438 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -141,7 +141,7 @@ static void ep_device_release(struct device *dev) kfree(ep_dev); } -struct device_type usb_ep_device_type = { +const struct device_type usb_ep_device_type = { .name = "usb_endpoint", .release = ep_device_release, }; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index edf74458474a1..c0e005670d67d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -357,12 +357,10 @@ static const u8 ss_rh_config_descriptor[] = { #define USB_AUTHORIZE_ALL 1 #define USB_AUTHORIZE_INTERNAL 2 -static int authorized_default = USB_AUTHORIZE_WIRED; +static int authorized_default = CONFIG_USB_DEFAULT_AUTHORIZATION_MODE; module_param(authorized_default, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(authorized_default, - "Default USB device authorization: 0 is not authorized, 1 is " - "authorized, 2 is authorized for internal devices, -1 is " - "authorized (default, same as 1)"); + "Default USB device authorization: 0 is not authorized, 1 is authorized (default), 2 is authorized for internal devices, -1 is authorized (same as 1)"); /*-------------------------------------------------------------------------*/ /** @@ -2795,10 +2793,16 @@ int usb_add_hcd(struct usb_hcd *hcd, struct usb_device *rhdev; struct usb_hcd *shared_hcd; - if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { - hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); - if (IS_ERR(hcd->phy_roothub)) - return PTR_ERR(hcd->phy_roothub); + if (!hcd->skip_phy_initialization) { + if (usb_hcd_is_primary_hcd(hcd)) { + hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); + if (IS_ERR(hcd->phy_roothub)) + return PTR_ERR(hcd->phy_roothub); + } else { + hcd->phy_roothub = usb_phy_roothub_alloc_usb3_phy(hcd->self.sysdev); + if (IS_ERR(hcd->phy_roothub)) + return PTR_ERR(hcd->phy_roothub); + } retval = usb_phy_roothub_init(hcd->phy_roothub); if (retval) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index e38a4124f6102..3ee8455585b6b 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -37,6 +37,7 @@ #include <asm/byteorder.h> #include "hub.h" +#include "phy.h" #include "otg_productlist.h" #define USB_VENDOR_GENESYS_LOGIC 0x05e3 @@ -634,6 +635,34 @@ static int hub_ext_port_status(struct usb_hub *hub, int port1, int type, ret = 0; } mutex_unlock(&hub->status_mutex); + + /* + * There is no need to lock status_mutex here, because status_mutex + * protects hub->status, and the phy driver only checks the port + * status without changing the status. + */ + if (!ret) { + struct usb_device *hdev = hub->hdev; + + /* + * Only roothub will be notified of connection changes, + * since the USB PHY only cares about changes at the next + * level. + */ + if (is_root_hub(hdev)) { + struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + bool connect; + bool connect_change; + + connect_change = *change & USB_PORT_STAT_C_CONNECTION; + connect = *status & USB_PORT_STAT_CONNECTION; + if (connect_change && connect) + usb_phy_roothub_notify_connect(hcd->phy_roothub, port1 - 1); + else if (connect_change) + usb_phy_roothub_notify_disconnect(hcd->phy_roothub, port1 - 1); + } + } + return ret; } diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 077dfe48d01c1..d2b2787be4092 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1198,6 +1198,8 @@ EXPORT_SYMBOL_GPL(usb_get_status); * same status code used to report a true stall. * * This call is synchronous, and may not be used in an interrupt context. + * If a thread in your driver uses this call, make sure your disconnect() + * method can wait for it to complete. * * Return: Zero on success, or else the status code returned by the * underlying usb_control_msg() call. @@ -1516,7 +1518,8 @@ void usb_enable_interface(struct usb_device *dev, * This call is synchronous, and may not be used in an interrupt context. * Also, drivers must not change altsettings while urbs are scheduled for * endpoints in that interface; all such urbs must first be completed - * (perhaps forced by unlinking). + * (perhaps forced by unlinking). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. * * Return: Zero on success, or else the status code returned by the * underlying usb_control_msg() call. @@ -1849,7 +1852,7 @@ static int usb_if_uevent(const struct device *dev, struct kobj_uevent_env *env) return 0; } -struct device_type usb_if_device_type = { +const struct device_type usb_if_device_type = { .name = "usb_interface", .release = usb_release_interface, .uevent = usb_if_uevent, diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c index db4ccf9ce3d9b..f1a499ee482c3 100644 --- a/drivers/usb/core/of.c +++ b/drivers/usb/core/of.c @@ -8,6 +8,7 @@ */ #include <linux/of.h> +#include <linux/of_graph.h> #include <linux/usb/of.h> /** @@ -75,6 +76,76 @@ bool usb_of_has_combined_node(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_of_has_combined_node); +static bool usb_of_has_devices_or_graph(const struct usb_device *hub) +{ + const struct device_node *np = hub->dev.of_node; + struct device_node *child; + + if (of_graph_is_present(np)) + return true; + + for_each_child_of_node(np, child) + if (of_property_present(child, "reg")) + return true; + + return false; +} + +/** + * usb_of_get_connect_type() - get a USB hub's port connect_type + * @hub: hub to which port is for @port1 + * @port1: one-based index of port + * + * Get the connect_type of @port1 based on the device node for @hub. If the + * port is described in the OF graph, the connect_type is "hotplug". If the + * @hub has a child device has with a 'reg' property equal to @port1 the + * connect_type is "hard-wired". If there isn't an OF graph or child node at + * all then the connect_type is "unknown". Otherwise, the port is considered + * "unused" because it isn't described at all. + * + * Return: A connect_type for @port1 based on the device node for @hub. + */ +enum usb_port_connect_type usb_of_get_connect_type(struct usb_device *hub, int port1) +{ + struct device_node *np, *child, *ep, *remote_np; + enum usb_port_connect_type connect_type; + + /* Only set connect_type if binding has ports/hardwired devices. */ + if (!usb_of_has_devices_or_graph(hub)) + return USB_PORT_CONNECT_TYPE_UNKNOWN; + + /* Assume port is unused if there's a graph or a child node. */ + connect_type = USB_PORT_NOT_USED; + + np = hub->dev.of_node; + /* + * Hotplug ports are connected to an available remote node, e.g. + * usb-a-connector compatible node, in the OF graph. + */ + if (of_graph_is_present(np)) { + ep = of_graph_get_endpoint_by_regs(np, port1, -1); + if (ep) { + remote_np = of_graph_get_remote_port_parent(ep); + of_node_put(ep); + if (of_device_is_available(remote_np)) + connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG; + of_node_put(remote_np); + } + } + + /* + * Hard-wired ports are child nodes with a reg property corresponding + * to the port number, i.e. a usb device. + */ + child = usb_of_get_device_node(hub, port1); + if (of_device_is_available(child)) + connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED; + of_node_put(child); + + return connect_type; +} +EXPORT_SYMBOL_GPL(usb_of_get_connect_type); + /** * usb_of_get_interface_node() - get a USB interface node * @udev: USB device of interface diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c index fb1588e7c2823..faa20054ad5a1 100644 --- a/drivers/usb/core/phy.c +++ b/drivers/usb/core/phy.c @@ -19,6 +19,30 @@ struct usb_phy_roothub { struct list_head list; }; +/* Allocate the roothub_entry by specific name of phy */ +static int usb_phy_roothub_add_phy_by_name(struct device *dev, const char *name, + struct list_head *list) +{ + struct usb_phy_roothub *roothub_entry; + struct phy *phy; + + phy = devm_of_phy_get(dev, dev->of_node, name); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL); + if (!roothub_entry) + return -ENOMEM; + + INIT_LIST_HEAD(&roothub_entry->list); + + roothub_entry->phy = phy; + + list_add_tail(&roothub_entry->list, list); + + return 0; +} + static int usb_phy_roothub_add_phy(struct device *dev, int index, struct list_head *list) { @@ -65,6 +89,9 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev) INIT_LIST_HEAD(&phy_roothub->list); + if (!usb_phy_roothub_add_phy_by_name(dev, "usb2-phy", &phy_roothub->list)) + return phy_roothub; + for (i = 0; i < num_phys; i++) { err = usb_phy_roothub_add_phy(dev, i, &phy_roothub->list); if (err) @@ -75,6 +102,41 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev) } EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc); +/** + * usb_phy_roothub_alloc_usb3_phy - alloc the roothub + * @dev: the device of the host controller + * + * Allocate the usb phy roothub if the host use a generic usb3-phy. + * + * Return: On success, a pointer to the usb_phy_roothub. Otherwise, + * %NULL if no use usb3 phy or %-ENOMEM if out of memory. + */ +struct usb_phy_roothub *usb_phy_roothub_alloc_usb3_phy(struct device *dev) +{ + struct usb_phy_roothub *phy_roothub; + int num_phys; + + if (!IS_ENABLED(CONFIG_GENERIC_PHY)) + return NULL; + + num_phys = of_count_phandle_with_args(dev->of_node, "phys", + "#phy-cells"); + if (num_phys <= 0) + return NULL; + + phy_roothub = devm_kzalloc(dev, sizeof(*phy_roothub), GFP_KERNEL); + if (!phy_roothub) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&phy_roothub->list); + + if (!usb_phy_roothub_add_phy_by_name(dev, "usb3-phy", &phy_roothub->list)) + return phy_roothub; + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc_usb3_phy); + int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub) { struct usb_phy_roothub *roothub_entry; @@ -172,6 +234,64 @@ int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub) } EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate); +/** + * usb_phy_roothub_notify_connect() - connect notification + * @phy_roothub: the phy of roothub, if the host use a generic phy. + * @port: the port index for connect + * + * If the phy needs to get connection status, the callback can be used. + * Returns: %0 if successful, a negative error code otherwise + */ +int usb_phy_roothub_notify_connect(struct usb_phy_roothub *phy_roothub, int port) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_notify_connect(roothub_entry->phy, port); + if (err) + return err; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_notify_connect); + +/** + * usb_phy_roothub_notify_disconnect() - disconnect notification + * @phy_roothub: the phy of roothub, if the host use a generic phy. + * @port: the port index for disconnect + * + * If the phy needs to get connection status, the callback can be used. + * Returns: %0 if successful, a negative error code otherwise + */ +int usb_phy_roothub_notify_disconnect(struct usb_phy_roothub *phy_roothub, int port) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_notify_disconnect(roothub_entry->phy, port); + if (err) + return err; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_notify_disconnect); + int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub) { struct usb_phy_roothub *roothub_entry; diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h index 20a267cd986b2..88b49c0ea6b58 100644 --- a/drivers/usb/core/phy.h +++ b/drivers/usb/core/phy.h @@ -12,6 +12,7 @@ struct device; struct usb_phy_roothub; struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev); +struct usb_phy_roothub *usb_phy_roothub_alloc_usb3_phy(struct device *dev); int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); @@ -19,6 +20,8 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub, enum phy_mode mode); int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub); +int usb_phy_roothub_notify_connect(struct usb_phy_roothub *phy_roothub, int port); +int usb_phy_roothub_notify_disconnect(struct usb_phy_roothub *phy_roothub, int port); int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub); void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub); diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 4d63496f98b6c..5b5e613a11e59 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -11,6 +11,7 @@ #include <linux/slab.h> #include <linux/pm_qos.h> #include <linux/component.h> +#include <linux/usb/of.h> #include "hub.h" @@ -429,7 +430,7 @@ static const struct dev_pm_ops usb_port_pm_ops = { #endif }; -struct device_type usb_port_device_type = { +const struct device_type usb_port_device_type = { .name = "usb_port", .release = usb_port_device_release, .pm = &usb_port_pm_ops, @@ -709,6 +710,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) return -ENOMEM; } + port_dev->connect_type = usb_of_get_connect_type(hdev, port1); hub->ports[port1 - 1] = port_dev; port_dev->portnum = port1; set_bit(port1, hub->power_bits); diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 5d21718afb05c..f98263e21c2a7 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -273,9 +273,10 @@ static ssize_t avoid_reset_quirk_store(struct device *dev, const char *buf, size_t count) { struct usb_device *udev = to_usb_device(dev); - int val, rc; + bool val; + int rc; - if (sscanf(buf, "%d", &val) != 1 || val < 0 || val > 1) + if (kstrtobool(buf, &val) != 0) return -EINVAL; rc = usb_lock_device_interruptible(udev); if (rc < 0) @@ -322,13 +323,14 @@ static ssize_t persist_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct usb_device *udev = to_usb_device(dev); - int value, rc; + bool value; + int rc; /* Hubs are always enabled for USB_PERSIST */ if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) return -EPERM; - if (sscanf(buf, "%d", &value) != 1) + if (kstrtobool(buf, &value) != 0) return -EINVAL; rc = usb_lock_device_interruptible(udev); @@ -739,14 +741,14 @@ static ssize_t authorized_store(struct device *dev, { ssize_t result; struct usb_device *usb_dev = to_usb_device(dev); - unsigned val; - result = sscanf(buf, "%u\n", &val); - if (result != 1) + bool val; + + if (kstrtobool(buf, &val) != 0) result = -EINVAL; - else if (val == 0) - result = usb_deauthorize_device(usb_dev); - else + else if (val) result = usb_authorize_device(usb_dev); + else + result = usb_deauthorize_device(usb_dev); return result < 0 ? result : size; } static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR, @@ -847,16 +849,10 @@ static const struct attribute_group dev_string_attr_grp = { .is_visible = dev_string_attrs_are_visible, }; -const struct attribute_group *usb_device_groups[] = { - &dev_attr_grp, - &dev_string_attr_grp, - NULL -}; - /* Binary descriptors */ static ssize_t -read_descriptors(struct file *filp, struct kobject *kobj, +descriptors_read(struct file *filp, struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t off, size_t count) { @@ -878,7 +874,7 @@ read_descriptors(struct file *filp, struct kobject *kobj, srclen = sizeof(struct usb_device_descriptor); } else { src = udev->rawdescriptors[cfgno]; - srclen = __le16_to_cpu(udev->config[cfgno].desc. + srclen = le16_to_cpu(udev->config[cfgno].desc. wTotalLength); } if (off < srclen) { @@ -893,11 +889,69 @@ read_descriptors(struct file *filp, struct kobject *kobj, } return count - nleft; } +static BIN_ATTR_RO(descriptors, 18 + 65535); /* dev descr + max-size raw descriptor */ + +static ssize_t +bos_descriptors_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct usb_device *udev = to_usb_device(dev); + struct usb_host_bos *bos = udev->bos; + struct usb_bos_descriptor *desc; + size_t desclen, n = 0; + + if (bos) { + desc = bos->desc; + desclen = le16_to_cpu(desc->wTotalLength); + if (off < desclen) { + n = min(count, desclen - (size_t) off); + memcpy(buf, (void *) desc + off, n); + } + } + return n; +} +static BIN_ATTR_RO(bos_descriptors, 65535); /* max-size BOS */ -static struct bin_attribute dev_bin_attr_descriptors = { - .attr = {.name = "descriptors", .mode = 0444}, - .read = read_descriptors, - .size = 18 + 65535, /* dev descr + max-size raw descriptor */ +/* When modifying this list, be sure to modify dev_bin_attrs_are_visible() + * accordingly. + */ +static struct bin_attribute *dev_bin_attrs[] = { + &bin_attr_descriptors, + &bin_attr_bos_descriptors, + NULL +}; + +static umode_t dev_bin_attrs_are_visible(struct kobject *kobj, + struct bin_attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct usb_device *udev = to_usb_device(dev); + + /* + * There's no need to check if the descriptors attribute should + * be visible because all devices have a device descriptor. The + * bos_descriptors attribute should be visible if and only if + * the device has a BOS, so check if it exists here. + */ + if (a == &bin_attr_bos_descriptors) { + if (udev->bos == NULL) + return 0; + } + return a->attr.mode; +} + +static const struct attribute_group dev_bin_attr_grp = { + .bin_attrs = dev_bin_attrs, + .is_bin_visible = dev_bin_attrs_are_visible, +}; + +const struct attribute_group *usb_device_groups[] = { + &dev_attr_grp, + &dev_string_attr_grp, + &dev_bin_attr_grp, + NULL }; /* @@ -1015,10 +1069,6 @@ int usb_create_sysfs_dev_files(struct usb_device *udev) struct device *dev = &udev->dev; int retval; - retval = device_create_bin_file(dev, &dev_bin_attr_descriptors); - if (retval) - goto error; - retval = add_persist_attributes(dev); if (retval) goto error; @@ -1048,7 +1098,6 @@ void usb_remove_sysfs_dev_files(struct usb_device *udev) remove_power_attributes(dev); remove_persist_attributes(dev); - device_remove_bin_file(dev, &dev_bin_attr_descriptors); } /* Interface Association Descriptor fields */ diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index a34b22537d7cc..7f8a912d4fe2a 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -142,12 +142,19 @@ int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable) } EXPORT_SYMBOL_GPL(usb_acpi_set_power_state); -static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle, - struct acpi_pld_info *pld) +/* + * Private to usb-acpi, all the core needs to know is that + * port_dev->location is non-zero when it has been set by the firmware. + */ +#define USB_ACPI_LOCATION_VALID (1 << 31) + +static void +usb_acpi_get_connect_type(struct usb_port *port_dev, acpi_handle *handle) { enum usb_port_connect_type connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *upc = NULL; + struct acpi_pld_info *pld = NULL; acpi_status status; /* @@ -158,6 +165,12 @@ static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle, * a usb device is directly hard-wired to the port. If no visible and * no connectable, the port would be not used. */ + + status = acpi_get_physical_device_location(handle, &pld); + if (ACPI_SUCCESS(status) && pld) + port_dev->location = USB_ACPI_LOCATION_VALID | + pld->group_token << 8 | pld->group_position; + status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer); if (ACPI_FAILURE(status)) goto out; @@ -166,25 +179,22 @@ static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle, if (!upc || (upc->type != ACPI_TYPE_PACKAGE) || upc->package.count != 4) goto out; + /* UPC states port is connectable */ if (upc->package.elements[0].integer.value) - if (pld->user_visible) + if (!pld) + ; /* keep connect_type as unknown */ + else if (pld->user_visible) connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG; else connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED; - else if (!pld->user_visible) + else connect_type = USB_PORT_NOT_USED; out: + port_dev->connect_type = connect_type; kfree(upc); - return connect_type; + ACPI_FREE(pld); } - -/* - * Private to usb-acpi, all the core needs to know is that - * port_dev->location is non-zero when it has been set by the firmware. - */ -#define USB_ACPI_LOCATION_VALID (1 << 31) - static struct acpi_device * usb_acpi_get_companion_for_port(struct usb_port *port_dev) { @@ -222,22 +232,12 @@ static struct acpi_device * usb_acpi_find_companion_for_port(struct usb_port *port_dev) { struct acpi_device *adev; - struct acpi_pld_info *pld; - acpi_handle *handle; - acpi_status status; adev = usb_acpi_get_companion_for_port(port_dev); if (!adev) return NULL; - handle = adev->handle; - status = acpi_get_physical_device_location(handle, &pld); - if (ACPI_SUCCESS(status) && pld) { - port_dev->location = USB_ACPI_LOCATION_VALID - | pld->group_token << 8 | pld->group_position; - port_dev->connect_type = usb_acpi_get_connect_type(handle, pld); - ACPI_FREE(pld); - } + usb_acpi_get_connect_type(port_dev, adev->handle); return adev; } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index dc8d9228a5e75..a0c432b14b20b 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -592,7 +592,7 @@ static char *usb_devnode(const struct device *dev, usb_dev->bus->busnum, usb_dev->devnum); } -struct device_type usb_device_type = { +const struct device_type usb_device_type = { .name = "usb_device", .release = usb_release_dev, .uevent = usb_dev_uevent, diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index bfecb50773b6b..b8324ea05b20f 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -144,10 +144,10 @@ static inline int usb_disable_usb2_hardware_lpm(struct usb_device *udev) extern const struct class usbmisc_class; extern const struct bus_type usb_bus_type; extern struct mutex usb_port_peer_mutex; -extern struct device_type usb_device_type; -extern struct device_type usb_if_device_type; -extern struct device_type usb_ep_device_type; -extern struct device_type usb_port_device_type; +extern const struct device_type usb_device_type; +extern const struct device_type usb_if_device_type; +extern const struct device_type usb_ep_device_type; +extern const struct device_type usb_port_device_type; extern struct usb_device_driver usb_generic_driver; static inline int is_usb_device(const struct device *dev) diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 5fc27b20df630..31078f3d41b88 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -131,7 +131,7 @@ config USB_DWC3_QCOM tristate "Qualcomm Platform" depends on ARCH_QCOM || COMPILE_TEST depends on EXTCON || !EXTCON - depends on (OF || ACPI) + depends on OF default USB_DWC3 help Some Qualcomm SoCs use DesignWare Core IP for USB2/3 diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index e120611a5174f..c07edfc954f72 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -755,6 +755,7 @@ struct dwc3_ep { #define DWC3_EP_PENDING_CLEAR_STALL BIT(11) #define DWC3_EP_TXFIFO_RESIZED BIT(12) #define DWC3_EP_DELAY_STOP BIT(13) +#define DWC3_EP_RESOURCE_ALLOCATED BIT(14) /* This last one is specific to EP0 */ #define DWC3_EP0_DIR_IN BIT(31) @@ -1257,6 +1258,7 @@ struct dwc3 { #define DWC31_REVISION_170A 0x3137302a #define DWC31_REVISION_180A 0x3138302a #define DWC31_REVISION_190A 0x3139302a +#define DWC31_REVISION_200A 0x3230302a #define DWC32_REVISION_ANY 0x0 #define DWC32_REVISION_100A 0x3130302a diff --git a/drivers/usb/dwc3/dwc3-am62.c b/drivers/usb/dwc3/dwc3-am62.c index 90a587bc29b74..fad151e78fd66 100644 --- a/drivers/usb/dwc3/dwc3-am62.c +++ b/drivers/usb/dwc3/dwc3-am62.c @@ -97,9 +97,15 @@ #define USBSS_VBUS_STAT_SESSVALID BIT(2) #define USBSS_VBUS_STAT_VBUSVALID BIT(0) -/* Mask for PHY PLL REFCLK */ +/* USB_PHY_CTRL register bits in CTRL_MMR */ +#define PHY_CORE_VOLTAGE_MASK BIT(31) #define PHY_PLL_REFCLK_MASK GENMASK(3, 0) +/* USB PHY2 register offsets */ +#define USB_PHY_PLL_REG12 0x130 +#define USB_PHY_PLL_LDO_REF_EN BIT(5) +#define USB_PHY_PLL_LDO_REF_EN_EN BIT(4) + #define DWC3_AM62_AUTOSUSPEND_DELAY 100 struct dwc3_am62 { @@ -162,6 +168,13 @@ static int phy_syscon_pll_refclk(struct dwc3_am62 *am62) am62->offset = args.args[0]; + /* Core voltage. PHY_CORE_VOLTAGE bit Recommended to be 0 always */ + ret = regmap_update_bits(am62->syscon, am62->offset, PHY_CORE_VOLTAGE_MASK, 0); + if (ret) { + dev_err(dev, "failed to set phy core voltage\n"); + return ret; + } + ret = regmap_update_bits(am62->syscon, am62->offset, PHY_PLL_REFCLK_MASK, am62->rate_code); if (ret) { dev_err(dev, "failed to set phy pll reference clock rate\n"); @@ -176,8 +189,9 @@ static int dwc3_ti_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *node = pdev->dev.of_node; struct dwc3_am62 *am62; - int i, ret; unsigned long rate; + void __iomem *phy; + int i, ret; u32 reg; am62 = devm_kzalloc(dev, sizeof(*am62), GFP_KERNEL); @@ -219,6 +233,17 @@ static int dwc3_ti_probe(struct platform_device *pdev) if (ret) return ret; + /* Workaround Errata i2409 */ + phy = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(phy)) { + dev_err(dev, "can't map PHY IOMEM resource. Won't apply i2409 fix.\n"); + phy = NULL; + } else { + reg = readl(phy + USB_PHY_PLL_REG12); + reg |= USB_PHY_PLL_LDO_REF_EN | USB_PHY_PLL_LDO_REF_EN_EN; + writel(reg, phy + USB_PHY_PLL_REG12); + } + /* VBUS divider select */ am62->vbus_divider = device_property_read_bool(dev, "ti,vbus-divider"); reg = dwc3_ti_readl(am62, USBSS_PHY_CONFIG); @@ -267,21 +292,15 @@ err_pm_disable: return ret; } -static int dwc3_ti_remove_core(struct device *dev, void *c) -{ - struct platform_device *pdev = to_platform_device(dev); - - platform_device_unregister(pdev); - return 0; -} - static void dwc3_ti_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct dwc3_am62 *am62 = platform_get_drvdata(pdev); u32 reg; - device_for_each_child(dev, NULL, dwc3_ti_remove_core); + pm_runtime_get_sync(dev); + device_init_wakeup(dev, false); + of_platform_depopulate(dev); /* Clear mode valid bit */ reg = dwc3_ti_readl(am62, USBSS_MODE_CONTROL); @@ -289,7 +308,6 @@ static void dwc3_ti_remove(struct platform_device *pdev) dwc3_ti_writel(am62, USBSS_MODE_CONTROL, reg); pm_runtime_put_sync(dev); - clk_disable_unprepare(am62->usb2_refclk); pm_runtime_disable(dev); pm_runtime_set_suspended(dev); } diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c index d1539fc9eabda..be7be00ecb349 100644 --- a/drivers/usb/dwc3/dwc3-of-simple.c +++ b/drivers/usb/dwc3/dwc3-of-simple.c @@ -52,8 +52,7 @@ static int dwc3_of_simple_probe(struct platform_device *pdev) if (of_device_is_compatible(np, "rockchip,rk3399-dwc3")) simple->need_reset = true; - simple->resets = of_reset_control_array_get(np, false, true, - true); + simple->resets = of_reset_control_array_get_optional_exclusive(np); if (IS_ERR(simple->resets)) { ret = PTR_ERR(simple->resets); dev_err(dev, "failed to get device resets, err=%d\n", ret); @@ -173,6 +172,7 @@ static const struct of_device_id of_dwc3_simple_match[] = { { .compatible = "sprd,sc9860-dwc3" }, { .compatible = "allwinner,sun50i-h6-dwc3" }, { .compatible = "hisilicon,hi3670-dwc3" }, + { .compatible = "hisilicon,hi3798mv200-dwc3" }, { .compatible = "intel,keembay-dwc3" }, { /* Sentinel */ } }; diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index dbd6a5b2b2892..f6b2fab49d5e6 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -4,7 +4,6 @@ * Inspired by dwc3-of-simple.c */ -#include <linux/acpi.h> #include <linux/io.h> #include <linux/of.h> #include <linux/clk.h> @@ -53,22 +52,10 @@ #define APPS_USB_AVG_BW 0 #define APPS_USB_PEAK_BW MBps_to_icc(40) -struct dwc3_acpi_pdata { - u32 qscratch_base_offset; - u32 qscratch_base_size; - u32 dwc3_core_base_size; - int qusb2_phy_irq_index; - int dp_hs_phy_irq_index; - int dm_hs_phy_irq_index; - int ss_phy_irq_index; - bool is_urs; -}; - struct dwc3_qcom { struct device *dev; void __iomem *qscratch_base; struct platform_device *dwc3; - struct platform_device *urs_usb; struct clk **clks; int num_clocks; struct reset_control *resets; @@ -84,8 +71,6 @@ struct dwc3_qcom { struct notifier_block vbus_nb; struct notifier_block host_nb; - const struct dwc3_acpi_pdata *acpi_pdata; - enum usb_dr_mode mode; bool is_suspended; bool pm_suspended; @@ -248,9 +233,6 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom) struct device *dev = qcom->dev; int ret; - if (has_acpi_companion(dev)) - return 0; - qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr"); if (IS_ERR(qcom->icc_path_ddr)) { return dev_err_probe(dev, PTR_ERR(qcom->icc_path_ddr), @@ -519,31 +501,13 @@ static void dwc3_qcom_select_utmi_clk(struct dwc3_qcom *qcom) PIPE_UTMI_CLK_DIS); } -static int dwc3_qcom_get_irq(struct platform_device *pdev, - const char *name, int num) -{ - struct dwc3_qcom *qcom = platform_get_drvdata(pdev); - struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : pdev; - struct device_node *np = pdev->dev.of_node; - int ret; - - if (np) - ret = platform_get_irq_byname_optional(pdev_irq, name); - else - ret = platform_get_irq_optional(pdev_irq, num); - - return ret; -} - static int dwc3_qcom_setup_irq(struct platform_device *pdev) { struct dwc3_qcom *qcom = platform_get_drvdata(pdev); - const struct dwc3_acpi_pdata *pdata = qcom->acpi_pdata; int irq; int ret; - irq = dwc3_qcom_get_irq(pdev, "qusb2_phy", - pdata ? pdata->qusb2_phy_irq_index : -1); + irq = platform_get_irq_byname_optional(pdev, "qusb2_phy"); if (irq > 0) { /* Keep wakeup interrupts disabled until suspend */ ret = devm_request_threaded_irq(qcom->dev, irq, NULL, @@ -557,8 +521,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) qcom->qusb2_phy_irq = irq; } - irq = dwc3_qcom_get_irq(pdev, "dp_hs_phy_irq", - pdata ? pdata->dp_hs_phy_irq_index : -1); + irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq"); if (irq > 0) { ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, @@ -571,8 +534,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) qcom->dp_hs_phy_irq = irq; } - irq = dwc3_qcom_get_irq(pdev, "dm_hs_phy_irq", - pdata ? pdata->dm_hs_phy_irq_index : -1); + irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq"); if (irq > 0) { ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, @@ -585,8 +547,7 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev) qcom->dm_hs_phy_irq = irq; } - irq = dwc3_qcom_get_irq(pdev, "ss_phy_irq", - pdata ? pdata->ss_phy_irq_index : -1); + irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq"); if (irq > 0) { ret = devm_request_threaded_irq(qcom->dev, irq, NULL, qcom_dwc3_resume_irq, @@ -649,88 +610,6 @@ static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count) return 0; } -static const struct property_entry dwc3_qcom_acpi_properties[] = { - PROPERTY_ENTRY_STRING("dr_mode", "host"), - {} -}; - -static const struct software_node dwc3_qcom_swnode = { - .properties = dwc3_qcom_acpi_properties, -}; - -static int dwc3_qcom_acpi_register_core(struct platform_device *pdev) -{ - struct dwc3_qcom *qcom = platform_get_drvdata(pdev); - struct device *dev = &pdev->dev; - struct resource *res, *child_res = NULL; - struct platform_device *pdev_irq = qcom->urs_usb ? qcom->urs_usb : - pdev; - int irq; - int ret; - - qcom->dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO); - if (!qcom->dwc3) - return -ENOMEM; - - qcom->dwc3->dev.parent = dev; - qcom->dwc3->dev.type = dev->type; - qcom->dwc3->dev.dma_mask = dev->dma_mask; - qcom->dwc3->dev.dma_parms = dev->dma_parms; - qcom->dwc3->dev.coherent_dma_mask = dev->coherent_dma_mask; - - child_res = kcalloc(2, sizeof(*child_res), GFP_KERNEL); - if (!child_res) { - platform_device_put(qcom->dwc3); - return -ENOMEM; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get memory resource\n"); - ret = -ENODEV; - goto out; - } - - child_res[0].flags = res->flags; - child_res[0].start = res->start; - child_res[0].end = child_res[0].start + - qcom->acpi_pdata->dwc3_core_base_size; - - irq = platform_get_irq(pdev_irq, 0); - if (irq < 0) { - ret = irq; - goto out; - } - child_res[1].flags = IORESOURCE_IRQ; - child_res[1].start = child_res[1].end = irq; - - ret = platform_device_add_resources(qcom->dwc3, child_res, 2); - if (ret) { - dev_err(&pdev->dev, "failed to add resources\n"); - goto out; - } - - ret = device_add_software_node(&qcom->dwc3->dev, &dwc3_qcom_swnode); - if (ret < 0) { - dev_err(&pdev->dev, "failed to add properties\n"); - goto out; - } - - ret = platform_device_add(qcom->dwc3); - if (ret) { - dev_err(&pdev->dev, "failed to add device\n"); - device_remove_software_node(&qcom->dwc3->dev); - goto out; - } - kfree(child_res); - return 0; - -out: - platform_device_put(qcom->dwc3); - kfree(child_res); - return ret; -} - static int dwc3_qcom_of_register_core(struct platform_device *pdev) { struct dwc3_qcom *qcom = platform_get_drvdata(pdev); @@ -763,57 +642,12 @@ node_put: return ret; } -static struct platform_device *dwc3_qcom_create_urs_usb_platdev(struct device *dev) -{ - struct platform_device *urs_usb = NULL; - struct fwnode_handle *fwh; - struct acpi_device *adev; - char name[8]; - int ret; - int id; - - /* Figure out device id */ - ret = sscanf(fwnode_get_name(dev->fwnode), "URS%d", &id); - if (!ret) - return NULL; - - /* Find the child using name */ - snprintf(name, sizeof(name), "USB%d", id); - fwh = fwnode_get_named_child_node(dev->fwnode, name); - if (!fwh) - return NULL; - - adev = to_acpi_device_node(fwh); - if (!adev) - goto err_put_handle; - - urs_usb = acpi_create_platform_device(adev, NULL); - if (IS_ERR_OR_NULL(urs_usb)) - goto err_put_handle; - - return urs_usb; - -err_put_handle: - fwnode_handle_put(fwh); - - return urs_usb; -} - -static void dwc3_qcom_destroy_urs_usb_platdev(struct platform_device *urs_usb) -{ - struct fwnode_handle *fwh = urs_usb->dev.fwnode; - - platform_device_unregister(urs_usb); - fwnode_handle_put(fwh); -} - static int dwc3_qcom_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct device *dev = &pdev->dev; struct dwc3_qcom *qcom; - struct resource *res, *parent_res = NULL; - struct resource local_res; + struct resource *res; int ret, i; bool ignore_pipe_clk; bool wakeup_source; @@ -825,14 +659,6 @@ static int dwc3_qcom_probe(struct platform_device *pdev) platform_set_drvdata(pdev, qcom); qcom->dev = &pdev->dev; - if (has_acpi_companion(dev)) { - qcom->acpi_pdata = acpi_device_get_match_data(dev); - if (!qcom->acpi_pdata) { - dev_err(&pdev->dev, "no supporting ACPI device data\n"); - return -EINVAL; - } - } - qcom->resets = devm_reset_control_array_get_optional_exclusive(dev); if (IS_ERR(qcom->resets)) { return dev_err_probe(&pdev->dev, PTR_ERR(qcom->resets), @@ -861,40 +687,16 @@ static int dwc3_qcom_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (np) { - parent_res = res; - } else { - memcpy(&local_res, res, sizeof(struct resource)); - parent_res = &local_res; - - parent_res->start = res->start + - qcom->acpi_pdata->qscratch_base_offset; - parent_res->end = parent_res->start + - qcom->acpi_pdata->qscratch_base_size; - - if (qcom->acpi_pdata->is_urs) { - qcom->urs_usb = dwc3_qcom_create_urs_usb_platdev(dev); - if (IS_ERR_OR_NULL(qcom->urs_usb)) { - dev_err(dev, "failed to create URS USB platdev\n"); - if (!qcom->urs_usb) - ret = -ENODEV; - else - ret = PTR_ERR(qcom->urs_usb); - goto clk_disable; - } - } - } - - qcom->qscratch_base = devm_ioremap_resource(dev, parent_res); + qcom->qscratch_base = devm_ioremap_resource(dev, res); if (IS_ERR(qcom->qscratch_base)) { ret = PTR_ERR(qcom->qscratch_base); - goto free_urs; + goto clk_disable; } ret = dwc3_qcom_setup_irq(pdev); if (ret) { dev_err(dev, "failed to setup IRQs, err=%d\n", ret); - goto free_urs; + goto clk_disable; } /* @@ -906,14 +708,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev) if (ignore_pipe_clk) dwc3_qcom_select_utmi_clk(qcom); - if (np) - ret = dwc3_qcom_of_register_core(pdev); - else - ret = dwc3_qcom_acpi_register_core(pdev); - + ret = dwc3_qcom_of_register_core(pdev); if (ret) { dev_err(dev, "failed to register DWC3 Core, err=%d\n", ret); - goto free_urs; + goto clk_disable; } ret = dwc3_qcom_interconnect_init(qcom); @@ -945,16 +743,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev) interconnect_exit: dwc3_qcom_interconnect_exit(qcom); depopulate: - if (np) { - of_platform_depopulate(&pdev->dev); - } else { - device_remove_software_node(&qcom->dwc3->dev); - platform_device_del(qcom->dwc3); - } + of_platform_depopulate(&pdev->dev); platform_device_put(qcom->dwc3); -free_urs: - if (qcom->urs_usb) - dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb); clk_disable: for (i = qcom->num_clocks - 1; i >= 0; i--) { clk_disable_unprepare(qcom->clks[i]); @@ -969,21 +759,12 @@ reset_assert: static void dwc3_qcom_remove(struct platform_device *pdev) { struct dwc3_qcom *qcom = platform_get_drvdata(pdev); - struct device_node *np = pdev->dev.of_node; struct device *dev = &pdev->dev; int i; - if (np) { - of_platform_depopulate(&pdev->dev); - } else { - device_remove_software_node(&qcom->dwc3->dev); - platform_device_del(qcom->dwc3); - } + of_platform_depopulate(&pdev->dev); platform_device_put(qcom->dwc3); - if (qcom->urs_usb) - dwc3_qcom_destroy_urs_usb_platdev(qcom->urs_usb); - for (i = qcom->num_clocks - 1; i >= 0; i--) { clk_disable_unprepare(qcom->clks[i]); clk_put(qcom->clks[i]); @@ -1053,38 +834,6 @@ static const struct of_device_id dwc3_qcom_of_match[] = { }; MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match); -#ifdef CONFIG_ACPI -static const struct dwc3_acpi_pdata sdm845_acpi_pdata = { - .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET, - .qscratch_base_size = SDM845_QSCRATCH_SIZE, - .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE, - .qusb2_phy_irq_index = 1, - .dp_hs_phy_irq_index = 4, - .dm_hs_phy_irq_index = 3, - .ss_phy_irq_index = 2 -}; - -static const struct dwc3_acpi_pdata sdm845_acpi_urs_pdata = { - .qscratch_base_offset = SDM845_QSCRATCH_BASE_OFFSET, - .qscratch_base_size = SDM845_QSCRATCH_SIZE, - .dwc3_core_base_size = SDM845_DWC3_CORE_SIZE, - .qusb2_phy_irq_index = 1, - .dp_hs_phy_irq_index = 4, - .dm_hs_phy_irq_index = 3, - .ss_phy_irq_index = 2, - .is_urs = true, -}; - -static const struct acpi_device_id dwc3_qcom_acpi_match[] = { - { "QCOM2430", (unsigned long)&sdm845_acpi_pdata }, - { "QCOM0304", (unsigned long)&sdm845_acpi_urs_pdata }, - { "QCOM0497", (unsigned long)&sdm845_acpi_urs_pdata }, - { "QCOM04A6", (unsigned long)&sdm845_acpi_pdata }, - { }, -}; -MODULE_DEVICE_TABLE(acpi, dwc3_qcom_acpi_match); -#endif - static struct platform_driver dwc3_qcom_driver = { .probe = dwc3_qcom_probe, .remove_new = dwc3_qcom_remove, @@ -1092,7 +841,6 @@ static struct platform_driver dwc3_qcom_driver = { .name = "dwc3-qcom", .pm = &dwc3_qcom_dev_pm_ops, .of_match_table = dwc3_qcom_of_match, - .acpi_match_table = ACPI_PTR(dwc3_qcom_acpi_match), }, }; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 6ae8a36f21cf6..72bb722da2f25 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -646,6 +646,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) return -EINVAL; case USB_STATE_ADDRESS: + dwc3_gadget_start_config(dwc, 2); dwc3_gadget_clear_tx_fifos(dwc); ret = dwc3_ep0_delegate_req(dwc, ctrl); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 28f49400f3e8b..40c52dbc28d3b 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -519,77 +519,56 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep) static int dwc3_gadget_set_xfer_resource(struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; + int ret; + + if (dep->flags & DWC3_EP_RESOURCE_ALLOCATED) + return 0; memset(¶ms, 0x00, sizeof(params)); params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1); - return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE, + ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE, ¶ms); + if (ret) + return ret; + + dep->flags |= DWC3_EP_RESOURCE_ALLOCATED; + return 0; } /** - * dwc3_gadget_start_config - configure ep resources - * @dep: endpoint that is being enabled - * - * Issue a %DWC3_DEPCMD_DEPSTARTCFG command to @dep. After the command's - * completion, it will set Transfer Resource for all available endpoints. - * - * The assignment of transfer resources cannot perfectly follow the data book - * due to the fact that the controller driver does not have all knowledge of the - * configuration in advance. It is given this information piecemeal by the - * composite gadget framework after every SET_CONFIGURATION and - * SET_INTERFACE. Trying to follow the databook programming model in this - * scenario can cause errors. For two reasons: - * - * 1) The databook says to do %DWC3_DEPCMD_DEPSTARTCFG for every - * %USB_REQ_SET_CONFIGURATION and %USB_REQ_SET_INTERFACE (8.1.5). This is - * incorrect in the scenario of multiple interfaces. - * - * 2) The databook does not mention doing more %DWC3_DEPCMD_DEPXFERCFG for new - * endpoint on alt setting (8.1.6). - * - * The following simplified method is used instead: + * dwc3_gadget_start_config - reset endpoint resources + * @dwc: pointer to the DWC3 context + * @resource_index: DEPSTARTCFG.XferRscIdx value (must be 0 or 2) * - * All hardware endpoints can be assigned a transfer resource and this setting - * will stay persistent until either a core reset or hibernation. So whenever we - * do a %DWC3_DEPCMD_DEPSTARTCFG(0) we can go ahead and do - * %DWC3_DEPCMD_DEPXFERCFG for every hardware endpoint as well. We are - * guaranteed that there are as many transfer resources as endpoints. + * Set resource_index=0 to reset all endpoints' resources allocation. Do this as + * part of the power-on/soft-reset initialization. * - * This function is called for each endpoint when it is being enabled but is - * triggered only when called for EP0-out, which always happens first, and which - * should only happen in one of the above conditions. + * Set resource_index=2 to reset only non-control endpoints' resources. Do this + * on receiving the SET_CONFIGURATION request or hibernation resume. */ -static int dwc3_gadget_start_config(struct dwc3_ep *dep) +int dwc3_gadget_start_config(struct dwc3 *dwc, unsigned int resource_index) { struct dwc3_gadget_ep_cmd_params params; - struct dwc3 *dwc; u32 cmd; int i; int ret; - if (dep->number) - return 0; + if (resource_index != 0 && resource_index != 2) + return -EINVAL; memset(¶ms, 0x00, sizeof(params)); cmd = DWC3_DEPCMD_DEPSTARTCFG; - dwc = dep->dwc; + cmd |= DWC3_DEPCMD_PARAM(resource_index); - ret = dwc3_send_gadget_ep_cmd(dep, cmd, ¶ms); + ret = dwc3_send_gadget_ep_cmd(dwc->eps[0], cmd, ¶ms); if (ret) return ret; - for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) { - struct dwc3_ep *dep = dwc->eps[i]; - - if (!dep) - continue; - - ret = dwc3_gadget_set_xfer_resource(dep); - if (ret) - return ret; - } + /* Reset resource allocation flags */ + for (i = resource_index; i < dwc->num_eps && dwc->eps[i]; i++) + dwc->eps[i]->flags &= ~DWC3_EP_RESOURCE_ALLOCATED; return 0; } @@ -884,16 +863,18 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action) ret = dwc3_gadget_resize_tx_fifos(dep); if (ret) return ret; - - ret = dwc3_gadget_start_config(dep); - if (ret) - return ret; } ret = dwc3_gadget_set_ep_config(dep, action); if (ret) return ret; + if (!(dep->flags & DWC3_EP_RESOURCE_ALLOCATED)) { + ret = dwc3_gadget_set_xfer_resource(dep); + if (ret) + return ret; + } + if (!(dep->flags & DWC3_EP_ENABLED)) { struct dwc3_trb *trb_st_hw; struct dwc3_trb *trb_link; @@ -1047,7 +1028,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) dep->stream_capable = false; dep->type = 0; - mask = DWC3_EP_TXFIFO_RESIZED; + mask = DWC3_EP_TXFIFO_RESIZED | DWC3_EP_RESOURCE_ALLOCATED; /* * dwc3_remove_requests() can exit early if DWC3 EP delayed stop is * set. Do not clear DEP flags, so that the end transfer command will @@ -2913,6 +2894,12 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) /* Start with SuperSpeed Default */ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); + ret = dwc3_gadget_start_config(dwc, 0); + if (ret) { + dev_err(dwc->dev, "failed to config endpoints\n"); + return ret; + } + dep = dwc->eps[0]; dep->flags = 0; ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); @@ -3428,7 +3415,7 @@ static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep, struct dwc3_request *req, const struct dwc3_event_depevt *event, int status) { - struct dwc3_trb *trb = &dep->trb_pool[dep->trb_dequeue]; + struct dwc3_trb *trb; struct scatterlist *sg = req->sg; struct scatterlist *s; unsigned int num_queued = req->num_queued_sgs; diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 55a56cf67d736..d73e735e40810 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -119,6 +119,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol); void dwc3_ep0_send_delayed_status(struct dwc3 *dwc); void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt); +int dwc3_gadget_start_config(struct dwc3 *dwc, unsigned int resource_index); /** * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 43230915323c7..5a5cb6ce9946d 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -11,8 +11,52 @@ #include <linux/of.h> #include <linux/platform_device.h> +#include "../host/xhci-port.h" +#include "../host/xhci-ext-caps.h" +#include "../host/xhci-caps.h" #include "core.h" +#define XHCI_HCSPARAMS1 0x4 +#define XHCI_PORTSC_BASE 0x400 + +/** + * dwc3_power_off_all_roothub_ports - Power off all Root hub ports + * @dwc: Pointer to our controller context structure + */ +static void dwc3_power_off_all_roothub_ports(struct dwc3 *dwc) +{ + void __iomem *xhci_regs; + u32 op_regs_base; + int port_num; + u32 offset; + u32 reg; + int i; + + /* xhci regs is not mapped yet, do it temperary here */ + if (dwc->xhci_resources[0].start) { + xhci_regs = ioremap(dwc->xhci_resources[0].start, DWC3_XHCI_REGS_END); + if (!xhci_regs) { + dev_err(dwc->dev, "Failed to ioremap xhci_regs\n"); + return; + } + + op_regs_base = HC_LENGTH(readl(xhci_regs)); + reg = readl(xhci_regs + XHCI_HCSPARAMS1); + port_num = HCS_MAX_PORTS(reg); + + for (i = 1; i <= port_num; i++) { + offset = op_regs_base + XHCI_PORTSC_BASE + 0x10 * (i - 1); + reg = readl(xhci_regs + offset); + reg &= ~PORT_POWER; + writel(reg, xhci_regs + offset); + } + + iounmap(xhci_regs); + } else { + dev_err(dwc->dev, "xhci base reg invalid\n"); + } +} + static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc, int irq, char *name) { @@ -66,6 +110,12 @@ int dwc3_host_init(struct dwc3 *dwc) int ret, irq; int prop_idx = 0; + /* + * Some platforms need to power off all Root hub ports immediately after DWC3 set to host + * mode to avoid VBUS glitch happen when xhci get reset later. + */ + dwc3_power_off_all_roothub_ports(dwc); + irq = dwc3_host_get_irq(dwc); if (irq < 0) return irq; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index b3592bcb0f966..566ff0b1282a8 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -190,6 +190,7 @@ config USB_F_MASS_STORAGE tristate config USB_F_FS + select DMA_SHARED_BUFFER tristate config USB_F_UAC1 diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 6bff6cb937891..bffbc1dc651f9 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -15,6 +15,9 @@ /* #define VERBOSE_DEBUG */ #include <linux/blkdev.h> +#include <linux/dma-buf.h> +#include <linux/dma-fence.h> +#include <linux/dma-resv.h> #include <linux/pagemap.h> #include <linux/export.h> #include <linux/fs_parser.h> @@ -43,6 +46,8 @@ #define FUNCTIONFS_MAGIC 0xa647361 /* Chosen by a honest dice roll ;) */ +MODULE_IMPORT_NS(DMA_BUF); + /* Reference counter handling */ static void ffs_data_get(struct ffs_data *ffs); static void ffs_data_put(struct ffs_data *ffs); @@ -124,6 +129,25 @@ struct ffs_ep { u8 num; }; +struct ffs_dmabuf_priv { + struct list_head entry; + struct kref ref; + struct ffs_data *ffs; + struct dma_buf_attachment *attach; + struct sg_table *sgt; + enum dma_data_direction dir; + spinlock_t lock; + u64 context; + struct usb_request *req; /* P: ffs->eps_lock */ + struct usb_ep *ep; /* P: ffs->eps_lock */ +}; + +struct ffs_dma_fence { + struct dma_fence base; + struct ffs_dmabuf_priv *priv; + struct work_struct work; +}; + struct ffs_epfile { /* Protects ep->ep and ep->req. */ struct mutex mutex; @@ -197,6 +221,11 @@ struct ffs_epfile { unsigned char isoc; /* P: ffs->eps_lock */ unsigned char _pad; + + /* Protects dmabufs */ + struct mutex dmabufs_mutex; + struct list_head dmabufs; /* P: dmabufs_mutex */ + atomic_t seqno; }; struct ffs_buffer { @@ -934,31 +963,44 @@ static ssize_t __ffs_epfile_read_data(struct ffs_epfile *epfile, return ret; } -static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) +static struct ffs_ep *ffs_epfile_wait_ep(struct file *file) { struct ffs_epfile *epfile = file->private_data; - struct usb_request *req; struct ffs_ep *ep; - char *data = NULL; - ssize_t ret, data_len = -EINVAL; - int halt; - - /* Are we still active? */ - if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) - return -ENODEV; + int ret; /* Wait for endpoint to be enabled */ ep = epfile->ep; if (!ep) { if (file->f_flags & O_NONBLOCK) - return -EAGAIN; + return ERR_PTR(-EAGAIN); ret = wait_event_interruptible( epfile->ffs->wait, (ep = epfile->ep)); if (ret) - return -EINTR; + return ERR_PTR(-EINTR); } + return ep; +} + +static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) +{ + struct ffs_epfile *epfile = file->private_data; + struct usb_request *req; + struct ffs_ep *ep; + char *data = NULL; + ssize_t ret, data_len = -EINVAL; + int halt; + + /* Are we still active? */ + if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) + return -ENODEV; + + ep = ffs_epfile_wait_ep(file); + if (IS_ERR(ep)) + return PTR_ERR(ep); + /* Do we halt? */ halt = (!io_data->read == !epfile->in); if (halt && epfile->isoc) @@ -1258,10 +1300,58 @@ static ssize_t ffs_epfile_read_iter(struct kiocb *kiocb, struct iov_iter *to) return res; } +static void ffs_dmabuf_release(struct kref *ref) +{ + struct ffs_dmabuf_priv *priv = container_of(ref, struct ffs_dmabuf_priv, ref); + struct dma_buf_attachment *attach = priv->attach; + struct dma_buf *dmabuf = attach->dmabuf; + + pr_vdebug("FFS DMABUF release\n"); + dma_resv_lock(dmabuf->resv, NULL); + dma_buf_unmap_attachment(attach, priv->sgt, priv->dir); + dma_resv_unlock(dmabuf->resv); + + dma_buf_detach(attach->dmabuf, attach); + dma_buf_put(dmabuf); + kfree(priv); +} + +static void ffs_dmabuf_get(struct dma_buf_attachment *attach) +{ + struct ffs_dmabuf_priv *priv = attach->importer_priv; + + kref_get(&priv->ref); +} + +static void ffs_dmabuf_put(struct dma_buf_attachment *attach) +{ + struct ffs_dmabuf_priv *priv = attach->importer_priv; + + kref_put(&priv->ref, ffs_dmabuf_release); +} + static int ffs_epfile_release(struct inode *inode, struct file *file) { struct ffs_epfile *epfile = inode->i_private; + struct ffs_dmabuf_priv *priv, *tmp; + struct ffs_data *ffs = epfile->ffs; + + mutex_lock(&epfile->dmabufs_mutex); + + /* Close all attached DMABUFs */ + list_for_each_entry_safe(priv, tmp, &epfile->dmabufs, entry) { + /* Cancel any pending transfer */ + spin_lock_irq(&ffs->eps_lock); + if (priv->ep && priv->req) + usb_ep_dequeue(priv->ep, priv->req); + spin_unlock_irq(&ffs->eps_lock); + + list_del(&priv->entry); + ffs_dmabuf_put(priv->attach); + } + + mutex_unlock(&epfile->dmabufs_mutex); __ffs_epfile_read_buffer_free(epfile); ffs_data_closed(epfile->ffs); @@ -1269,6 +1359,356 @@ ffs_epfile_release(struct inode *inode, struct file *file) return 0; } +static void ffs_dmabuf_cleanup(struct work_struct *work) +{ + struct ffs_dma_fence *dma_fence = + container_of(work, struct ffs_dma_fence, work); + struct ffs_dmabuf_priv *priv = dma_fence->priv; + struct dma_buf_attachment *attach = priv->attach; + struct dma_fence *fence = &dma_fence->base; + + ffs_dmabuf_put(attach); + dma_fence_put(fence); +} + +static void ffs_dmabuf_signal_done(struct ffs_dma_fence *dma_fence, int ret) +{ + struct ffs_dmabuf_priv *priv = dma_fence->priv; + struct dma_fence *fence = &dma_fence->base; + bool cookie = dma_fence_begin_signalling(); + + dma_fence_get(fence); + fence->error = ret; + dma_fence_signal(fence); + dma_fence_end_signalling(cookie); + + /* + * The fence will be unref'd in ffs_dmabuf_cleanup. + * It can't be done here, as the unref functions might try to lock + * the resv object, which would deadlock. + */ + INIT_WORK(&dma_fence->work, ffs_dmabuf_cleanup); + queue_work(priv->ffs->io_completion_wq, &dma_fence->work); +} + +static void ffs_epfile_dmabuf_io_complete(struct usb_ep *ep, + struct usb_request *req) +{ + pr_vdebug("FFS: DMABUF transfer complete, status=%d\n", req->status); + ffs_dmabuf_signal_done(req->context, req->status); + usb_ep_free_request(ep, req); +} + +static const char *ffs_dmabuf_get_driver_name(struct dma_fence *fence) +{ + return "functionfs"; +} + +static const char *ffs_dmabuf_get_timeline_name(struct dma_fence *fence) +{ + return ""; +} + +static void ffs_dmabuf_fence_release(struct dma_fence *fence) +{ + struct ffs_dma_fence *dma_fence = + container_of(fence, struct ffs_dma_fence, base); + + kfree(dma_fence); +} + +static const struct dma_fence_ops ffs_dmabuf_fence_ops = { + .get_driver_name = ffs_dmabuf_get_driver_name, + .get_timeline_name = ffs_dmabuf_get_timeline_name, + .release = ffs_dmabuf_fence_release, +}; + +static int ffs_dma_resv_lock(struct dma_buf *dmabuf, bool nonblock) +{ + if (!nonblock) + return dma_resv_lock_interruptible(dmabuf->resv, NULL); + + if (!dma_resv_trylock(dmabuf->resv)) + return -EBUSY; + + return 0; +} + +static struct dma_buf_attachment * +ffs_dmabuf_find_attachment(struct ffs_epfile *epfile, struct dma_buf *dmabuf) +{ + struct device *dev = epfile->ffs->gadget->dev.parent; + struct dma_buf_attachment *attach = NULL; + struct ffs_dmabuf_priv *priv; + + mutex_lock(&epfile->dmabufs_mutex); + + list_for_each_entry(priv, &epfile->dmabufs, entry) { + if (priv->attach->dev == dev + && priv->attach->dmabuf == dmabuf) { + attach = priv->attach; + break; + } + } + + if (attach) + ffs_dmabuf_get(attach); + + mutex_unlock(&epfile->dmabufs_mutex); + + return attach ?: ERR_PTR(-EPERM); +} + +static int ffs_dmabuf_attach(struct file *file, int fd) +{ + bool nonblock = file->f_flags & O_NONBLOCK; + struct ffs_epfile *epfile = file->private_data; + struct usb_gadget *gadget = epfile->ffs->gadget; + struct dma_buf_attachment *attach; + struct ffs_dmabuf_priv *priv; + enum dma_data_direction dir; + struct sg_table *sg_table; + struct dma_buf *dmabuf; + int err; + + if (!gadget || !gadget->sg_supported) + return -EPERM; + + dmabuf = dma_buf_get(fd); + if (IS_ERR(dmabuf)) + return PTR_ERR(dmabuf); + + attach = dma_buf_attach(dmabuf, gadget->dev.parent); + if (IS_ERR(attach)) { + err = PTR_ERR(attach); + goto err_dmabuf_put; + } + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + err = -ENOMEM; + goto err_dmabuf_detach; + } + + dir = epfile->in ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + + err = ffs_dma_resv_lock(dmabuf, nonblock); + if (err) + goto err_free_priv; + + sg_table = dma_buf_map_attachment(attach, dir); + dma_resv_unlock(dmabuf->resv); + + if (IS_ERR(sg_table)) { + err = PTR_ERR(sg_table); + goto err_free_priv; + } + + attach->importer_priv = priv; + + priv->sgt = sg_table; + priv->dir = dir; + priv->ffs = epfile->ffs; + priv->attach = attach; + spin_lock_init(&priv->lock); + kref_init(&priv->ref); + priv->context = dma_fence_context_alloc(1); + + mutex_lock(&epfile->dmabufs_mutex); + list_add(&priv->entry, &epfile->dmabufs); + mutex_unlock(&epfile->dmabufs_mutex); + + return 0; + +err_free_priv: + kfree(priv); +err_dmabuf_detach: + dma_buf_detach(dmabuf, attach); +err_dmabuf_put: + dma_buf_put(dmabuf); + + return err; +} + +static int ffs_dmabuf_detach(struct file *file, int fd) +{ + struct ffs_epfile *epfile = file->private_data; + struct ffs_data *ffs = epfile->ffs; + struct device *dev = ffs->gadget->dev.parent; + struct ffs_dmabuf_priv *priv, *tmp; + struct dma_buf *dmabuf; + int ret = -EPERM; + + dmabuf = dma_buf_get(fd); + if (IS_ERR(dmabuf)) + return PTR_ERR(dmabuf); + + mutex_lock(&epfile->dmabufs_mutex); + + list_for_each_entry_safe(priv, tmp, &epfile->dmabufs, entry) { + if (priv->attach->dev == dev + && priv->attach->dmabuf == dmabuf) { + /* Cancel any pending transfer */ + spin_lock_irq(&ffs->eps_lock); + if (priv->ep && priv->req) + usb_ep_dequeue(priv->ep, priv->req); + spin_unlock_irq(&ffs->eps_lock); + + list_del(&priv->entry); + + /* Unref the reference from ffs_dmabuf_attach() */ + ffs_dmabuf_put(priv->attach); + ret = 0; + break; + } + } + + mutex_unlock(&epfile->dmabufs_mutex); + dma_buf_put(dmabuf); + + return ret; +} + +static int ffs_dmabuf_transfer(struct file *file, + const struct usb_ffs_dmabuf_transfer_req *req) +{ + bool nonblock = file->f_flags & O_NONBLOCK; + struct ffs_epfile *epfile = file->private_data; + struct dma_buf_attachment *attach; + struct ffs_dmabuf_priv *priv; + struct ffs_dma_fence *fence; + struct usb_request *usb_req; + struct dma_buf *dmabuf; + struct ffs_ep *ep; + bool cookie; + u32 seqno; + int ret; + + if (req->flags & ~USB_FFS_DMABUF_TRANSFER_MASK) + return -EINVAL; + + dmabuf = dma_buf_get(req->fd); + if (IS_ERR(dmabuf)) + return PTR_ERR(dmabuf); + + if (req->length > dmabuf->size || req->length == 0) { + ret = -EINVAL; + goto err_dmabuf_put; + } + + attach = ffs_dmabuf_find_attachment(epfile, dmabuf); + if (IS_ERR(attach)) { + ret = PTR_ERR(attach); + goto err_dmabuf_put; + } + + priv = attach->importer_priv; + + ep = ffs_epfile_wait_ep(file); + if (IS_ERR(ep)) { + ret = PTR_ERR(ep); + goto err_attachment_put; + } + + ret = ffs_dma_resv_lock(dmabuf, nonblock); + if (ret) + goto err_attachment_put; + + /* Make sure we don't have writers */ + if (!dma_resv_test_signaled(dmabuf->resv, DMA_RESV_USAGE_WRITE)) { + pr_vdebug("FFS WRITE fence is not signaled\n"); + ret = -EBUSY; + goto err_resv_unlock; + } + + /* If we're writing to the DMABUF, make sure we don't have readers */ + if (epfile->in && + !dma_resv_test_signaled(dmabuf->resv, DMA_RESV_USAGE_READ)) { + pr_vdebug("FFS READ fence is not signaled\n"); + ret = -EBUSY; + goto err_resv_unlock; + } + + ret = dma_resv_reserve_fences(dmabuf->resv, 1); + if (ret) + goto err_resv_unlock; + + fence = kmalloc(sizeof(*fence), GFP_KERNEL); + if (!fence) { + ret = -ENOMEM; + goto err_resv_unlock; + } + + fence->priv = priv; + + spin_lock_irq(&epfile->ffs->eps_lock); + + /* In the meantime, endpoint got disabled or changed. */ + if (epfile->ep != ep) { + ret = -ESHUTDOWN; + goto err_fence_put; + } + + usb_req = usb_ep_alloc_request(ep->ep, GFP_ATOMIC); + if (!usb_req) { + ret = -ENOMEM; + goto err_fence_put; + } + + /* + * usb_ep_queue() guarantees that all transfers are processed in the + * order they are enqueued, so we can use a simple incrementing + * sequence number for the dma_fence. + */ + seqno = atomic_add_return(1, &epfile->seqno); + + dma_fence_init(&fence->base, &ffs_dmabuf_fence_ops, + &priv->lock, priv->context, seqno); + + dma_resv_add_fence(dmabuf->resv, &fence->base, + dma_resv_usage_rw(epfile->in)); + dma_resv_unlock(dmabuf->resv); + + /* Now that the dma_fence is in place, queue the transfer. */ + + usb_req->length = req->length; + usb_req->buf = NULL; + usb_req->sg = priv->sgt->sgl; + usb_req->num_sgs = sg_nents_for_len(priv->sgt->sgl, req->length); + usb_req->sg_was_mapped = true; + usb_req->context = fence; + usb_req->complete = ffs_epfile_dmabuf_io_complete; + + cookie = dma_fence_begin_signalling(); + ret = usb_ep_queue(ep->ep, usb_req, GFP_ATOMIC); + dma_fence_end_signalling(cookie); + if (!ret) { + priv->req = usb_req; + priv->ep = ep->ep; + } else { + pr_warn("FFS: Failed to queue DMABUF: %d\n", ret); + ffs_dmabuf_signal_done(fence, ret); + usb_ep_free_request(ep->ep, usb_req); + } + + spin_unlock_irq(&epfile->ffs->eps_lock); + dma_buf_put(dmabuf); + + return ret; + +err_fence_put: + spin_unlock_irq(&epfile->ffs->eps_lock); + dma_fence_put(&fence->base); +err_resv_unlock: + dma_resv_unlock(dmabuf->resv); +err_attachment_put: + ffs_dmabuf_put(attach); +err_dmabuf_put: + dma_buf_put(dmabuf); + + return ret; +} + static long ffs_epfile_ioctl(struct file *file, unsigned code, unsigned long value) { @@ -1279,18 +1719,49 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code, if (WARN_ON(epfile->ffs->state != FFS_ACTIVE)) return -ENODEV; - /* Wait for endpoint to be enabled */ - ep = epfile->ep; - if (!ep) { - if (file->f_flags & O_NONBLOCK) - return -EAGAIN; + switch (code) { + case FUNCTIONFS_DMABUF_ATTACH: + { + int fd; - ret = wait_event_interruptible( - epfile->ffs->wait, (ep = epfile->ep)); - if (ret) - return -EINTR; + if (copy_from_user(&fd, (void __user *)value, sizeof(fd))) { + ret = -EFAULT; + break; + } + + return ffs_dmabuf_attach(file, fd); + } + case FUNCTIONFS_DMABUF_DETACH: + { + int fd; + + if (copy_from_user(&fd, (void __user *)value, sizeof(fd))) { + ret = -EFAULT; + break; + } + + return ffs_dmabuf_detach(file, fd); + } + case FUNCTIONFS_DMABUF_TRANSFER: + { + struct usb_ffs_dmabuf_transfer_req req; + + if (copy_from_user(&req, (void __user *)value, sizeof(req))) { + ret = -EFAULT; + break; + } + + return ffs_dmabuf_transfer(file, &req); + } + default: + break; } + /* Wait for endpoint to be enabled */ + ep = ffs_epfile_wait_ep(file); + if (IS_ERR(ep)) + return PTR_ERR(ep); + spin_lock_irq(&epfile->ffs->eps_lock); /* In the meantime, endpoint got disabled or changed. */ @@ -1863,6 +2334,8 @@ static int ffs_epfiles_create(struct ffs_data *ffs) for (i = 1; i <= count; ++i, ++epfile) { epfile->ffs = ffs; mutex_init(&epfile->mutex); + mutex_init(&epfile->dmabufs_mutex); + INIT_LIST_HEAD(&epfile->dmabufs); if (ffs->user_flags & FUNCTIONFS_VIRTUAL_ADDR) sprintf(epfile->name, "ep%02x", ffs->eps_addrmap[i]); else @@ -3445,6 +3918,25 @@ static inline struct f_fs_opts *to_ffs_opts(struct config_item *item) func_inst.group); } +static ssize_t f_fs_opts_ready_show(struct config_item *item, char *page) +{ + struct f_fs_opts *opts = to_ffs_opts(item); + int ready; + + ffs_dev_lock(); + ready = opts->dev->desc_ready; + ffs_dev_unlock(); + + return sprintf(page, "%d\n", ready); +} + +CONFIGFS_ATTR_RO(f_fs_opts_, ready); + +static struct configfs_attribute *ffs_attrs[] = { + &f_fs_opts_attr_ready, + NULL, +}; + static void ffs_attr_release(struct config_item *item) { struct f_fs_opts *opts = to_ffs_opts(item); @@ -3458,6 +3950,7 @@ static struct configfs_item_operations ffs_item_ops = { static const struct config_item_type ffs_func_type = { .ct_item_ops = &ffs_item_ops, + .ct_attrs = ffs_attrs, .ct_owner = THIS_MODULE, }; diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 3c5a6f6ac3414..444212c0b5a98 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -718,7 +718,7 @@ static const struct net_device_ops eth_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -static struct device_type gadget_type = { +static const struct device_type gadget_type = { .name = "gadget", }; diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c index dd3241fc6939d..d41f5f31dadd5 100644 --- a/drivers/usb/gadget/function/uvc_video.c +++ b/drivers/usb/gadget/function/uvc_video.c @@ -35,6 +35,9 @@ uvc_video_encode_header(struct uvc_video *video, struct uvc_buffer *buf, data[1] = UVC_STREAM_EOH | video->fid; + if (video->queue.flags & UVC_QUEUE_DROP_INCOMPLETE) + data[1] |= UVC_STREAM_ERR; + if (video->queue.buf_used == 0 && ts.tv_sec) { /* dwClockFrequency is 48 MHz */ u32 pts = ((u64)ts.tv_sec * USEC_PER_SEC + ts.tv_nsec / NSEC_PER_USEC) * 48; @@ -370,6 +373,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req) struct uvc_video *video = ureq->video; struct uvc_video_queue *queue = &video->queue; struct uvc_buffer *last_buf; + struct usb_request *to_queue = req; unsigned long flags; bool is_bulk = video->max_payload_size; int ret = 0; @@ -397,7 +401,8 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req) case -EXDEV: uvcg_dbg(&video->uvc->func, "VS request missed xfer.\n"); - queue->flags |= UVC_QUEUE_DROP_INCOMPLETE; + if (req->length != 0) + queue->flags |= UVC_QUEUE_DROP_INCOMPLETE; break; case -ESHUTDOWN: /* disconnect from host. */ @@ -425,59 +430,59 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req) * we're still streaming before queueing the usb_request * back to req_free */ - if (video->is_enabled) { + if (!video->is_enabled) { + uvc_video_free_request(ureq, ep); + spin_unlock_irqrestore(&video->req_lock, flags); + uvcg_queue_cancel(queue, 0); + + return; + } + + /* + * Here we check whether any request is available in the ready + * list. If it is, queue it to the ep and add the current + * usb_request to the req_free list - for video_pump to fill in. + * Otherwise, just use the current usb_request to queue a 0 + * length request to the ep. Since we always add to the req_free + * list if we dequeue from the ready list, there will never + * be a situation where the req_free list is completely out of + * requests and cannot recover. + */ + to_queue->length = 0; + if (!list_empty(&video->req_ready)) { + to_queue = list_first_entry(&video->req_ready, + struct usb_request, list); + list_del(&to_queue->list); + list_add_tail(&req->list, &video->req_free); /* - * Here we check whether any request is available in the ready - * list. If it is, queue it to the ep and add the current - * usb_request to the req_free list - for video_pump to fill in. - * Otherwise, just use the current usb_request to queue a 0 - * length request to the ep. Since we always add to the req_free - * list if we dequeue from the ready list, there will never - * be a situation where the req_free list is completely out of - * requests and cannot recover. + * Queue work to the wq as well since it is possible that a + * buffer may not have been completely encoded with the set of + * in-flight usb requests for whih the complete callbacks are + * firing. + * In that case, if we do not queue work to the worker thread, + * the buffer will never be marked as complete - and therefore + * not be returned to userpsace. As a result, + * dequeue -> queue -> dequeue flow of uvc buffers will not + * happen. */ - struct usb_request *to_queue = req; - - to_queue->length = 0; - if (!list_empty(&video->req_ready)) { - to_queue = list_first_entry(&video->req_ready, - struct usb_request, list); - list_del(&to_queue->list); - list_add_tail(&req->list, &video->req_free); - /* - * Queue work to the wq as well since it is possible that a - * buffer may not have been completely encoded with the set of - * in-flight usb requests for whih the complete callbacks are - * firing. - * In that case, if we do not queue work to the worker thread, - * the buffer will never be marked as complete - and therefore - * not be returned to userpsace. As a result, - * dequeue -> queue -> dequeue flow of uvc buffers will not - * happen. - */ - queue_work(video->async_wq, &video->pump); - } + queue_work(video->async_wq, &video->pump); + } + /* + * Queue to the endpoint. The actual queueing to ep will + * only happen on one thread - the async_wq for bulk endpoints + * and this thread for isoc endpoints. + */ + ret = uvcg_video_usb_req_queue(video, to_queue, !is_bulk); + if (ret < 0) { /* - * Queue to the endpoint. The actual queueing to ep will - * only happen on one thread - the async_wq for bulk endpoints - * and this thread for isoc endpoints. + * Endpoint error, but the stream is still enabled. + * Put request back in req_free for it to be cleaned + * up later. */ - ret = uvcg_video_usb_req_queue(video, to_queue, !is_bulk); - if (ret < 0) { - /* - * Endpoint error, but the stream is still enabled. - * Put request back in req_free for it to be cleaned - * up later. - */ - list_add_tail(&to_queue->list, &video->req_free); - } - } else { - uvc_video_free_request(ureq, ep); - ret = 0; + list_add_tail(&to_queue->list, &video->req_free); } + spin_unlock_irqrestore(&video->req_lock, flags); - if (ret < 0) - uvcg_queue_cancel(queue, 0); } static int @@ -594,10 +599,7 @@ static void uvcg_video_pump(struct work_struct *work) */ spin_lock_irqsave(&queue->irqlock, flags); buf = uvcg_queue_head(queue); - - if (buf != NULL) { - video->encode(req, video, buf); - } else { + if (!buf) { /* * Either the queue has been disconnected or no video buffer * available for bulk transfer. Either way, stop processing @@ -607,6 +609,8 @@ static void uvcg_video_pump(struct work_struct *work) break; } + video->encode(req, video, buf); + spin_unlock_irqrestore(&queue->irqlock, flags); spin_lock_irqsave(&video->req_lock, flags); @@ -623,14 +627,7 @@ static void uvcg_video_pump(struct work_struct *work) uvcg_queue_cancel(queue, 0); break; } - - /* The request is owned by the endpoint / ready list. */ - req = NULL; } - - if (!req) - return; - spin_lock_irqsave(&video->req_lock, flags); if (video->is_enabled) list_add_tail(&req->list, &video->req_free); diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index d59f94464b870..9d4150124fdb8 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -903,6 +903,11 @@ int usb_gadget_map_request_by_dev(struct device *dev, if (req->length == 0) return 0; + if (req->sg_was_mapped) { + req->num_mapped_sgs = req->num_sgs; + return 0; + } + if (req->num_sgs) { int mapped; @@ -948,7 +953,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_map_request); void usb_gadget_unmap_request_by_dev(struct device *dev, struct usb_request *req, int is_in) { - if (req->length == 0) + if (req->length == 0 || req->sg_was_mapped) return; if (req->num_mapped_sgs) { diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index e8042c158f6dc..e82d03224f940 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -13,7 +13,7 @@ * code from Dave Liu and Shlomi Gridish. */ -#undef VERBOSE +#define pr_fmt(x) "udc: " x #include <linux/module.h> #include <linux/kernel.h> @@ -183,9 +183,9 @@ __acquires(ep->udc->lock) usb_gadget_unmap_request(&ep->udc->gadget, &req->req, ep_is_in(ep)); if (status && (status != -ESHUTDOWN)) - VDBG("complete %s req %p stat %d len %u/%u", - ep->ep.name, &req->req, status, - req->req.actual, req->req.length); + dev_vdbg(&udc->gadget.dev, "complete %s req %p stat %d len %u/%u\n", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); ep->stopped = 1; @@ -285,7 +285,7 @@ static int dr_controller_setup(struct fsl_udc *udc) timeout = jiffies + FSL_UDC_RESET_TIMEOUT; while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) { if (time_after(jiffies, timeout)) { - ERR("udc reset timeout!\n"); + dev_err(&udc->gadget.dev, "udc reset timeout!\n"); return -ETIMEDOUT; } cpu_relax(); @@ -308,9 +308,10 @@ static int dr_controller_setup(struct fsl_udc *udc) tmp &= USB_EP_LIST_ADDRESS_MASK; fsl_writel(tmp, &dr_regs->endpointlistaddr); - VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x", - udc->ep_qh, (int)tmp, - fsl_readl(&dr_regs->endpointlistaddr)); + dev_vdbg(&udc->gadget.dev, + "vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x\n", + udc->ep_qh, (int)tmp, + fsl_readl(&dr_regs->endpointlistaddr)); max_no_of_ep = (0x0000001F & fsl_readl(&dr_regs->dccparams)); for (ep_num = 1; ep_num < max_no_of_ep; ep_num++) { @@ -498,7 +499,7 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS; break; default: - VDBG("error ep type is %d", ep_type); + dev_vdbg(&udc->gadget.dev, "error ep type is %d\n", ep_type); return; } if (zlt) @@ -611,10 +612,10 @@ static int fsl_ep_enable(struct usb_ep *_ep, spin_unlock_irqrestore(&udc->lock, flags); retval = 0; - VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name, - ep->ep.desc->bEndpointAddress & 0x0f, - (desc->bEndpointAddress & USB_DIR_IN) - ? "in" : "out", max); + dev_vdbg(&udc->gadget.dev, "enabled %s (ep%d%s) maxpacket %d\n", + ep->ep.name, ep->ep.desc->bEndpointAddress & 0x0f, + (desc->bEndpointAddress & USB_DIR_IN) ? "in" : "out", + max); en_done: return retval; } @@ -633,7 +634,10 @@ static int fsl_ep_disable(struct usb_ep *_ep) ep = container_of(_ep, struct fsl_ep, ep); if (!_ep || !ep->ep.desc) { - VDBG("%s not enabled", _ep ? ep->ep.name : NULL); + /* + * dev_vdbg(&udc->gadget.dev, "%s not enabled\n", + * _ep ? ep->ep.name : NULL); + */ return -EINVAL; } @@ -659,7 +663,7 @@ static int fsl_ep_disable(struct usb_ep *_ep) ep->stopped = 1; spin_unlock_irqrestore(&udc->lock, flags); - VDBG("disabled %s OK", _ep->name); + dev_vdbg(&udc->gadget.dev, "disabled %s OK\n", _ep->name); return 0; } @@ -719,8 +723,8 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) { u32 temp, bitmask, tmp_stat; - /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr); - VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */ + /* dev_vdbg(&udc->gadget.dev, "QH addr Register 0x%8x\n", dr_regs->endpointlistaddr); + dev_vdbg(&udc->gadget.dev, "ep_qh[%d] addr is 0x%8x\n", i, (u32)&(ep->udc->ep_qh[i])); */ bitmask = ep_is_in(ep) ? (1 << (ep_index(ep) + 16)) @@ -808,7 +812,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length, *is_last = 0; if ((*is_last) == 0) - VDBG("multi-dtd request!"); + dev_vdbg(&udc_controller->gadget.dev, "multi-dtd request!\n"); /* Fill in the transfer size; set active bit */ swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE); @@ -820,7 +824,7 @@ static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length, mb(); - VDBG("length = %d address= 0x%x", *length, (int)*dma); + dev_vdbg(&udc_controller->gadget.dev, "length = %d address= 0x%x\n", *length, (int)*dma); return dtd; } @@ -871,11 +875,11 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* catch various bogus parameters */ if (!_req || !req->req.complete || !req->req.buf || !list_empty(&req->queue)) { - VDBG("%s, bad params", __func__); + dev_vdbg(&udc->gadget.dev, "%s, bad params\n", __func__); return -EINVAL; } if (unlikely(!_ep || !ep->ep.desc)) { - VDBG("%s, bad ep", __func__); + dev_vdbg(&udc->gadget.dev, "%s, bad ep\n", __func__); return -EINVAL; } if (usb_endpoint_xfer_isoc(ep->ep.desc)) { @@ -1036,8 +1040,8 @@ static int fsl_ep_set_halt(struct usb_ep *_ep, int value) udc->ep0_dir = 0; } out: - VDBG(" %s %s halt stat %d", ep->ep.name, - value ? "set" : "clear", status); + dev_vdbg(&udc->gadget.dev, "%s %s halt stat %d\n", ep->ep.name, + value ? "set" : "clear", status); return status; } @@ -1105,7 +1109,8 @@ static void fsl_ep_fifo_flush(struct usb_ep *_ep) /* Wait until flush complete */ while (fsl_readl(&dr_regs->endptflush)) { if (time_after(jiffies, timeout)) { - ERR("ep flush timeout\n"); + dev_err(&udc_controller->gadget.dev, + "ep flush timeout\n"); return; } cpu_relax(); @@ -1177,7 +1182,7 @@ static int fsl_vbus_session(struct usb_gadget *gadget, int is_active) udc = container_of(gadget, struct fsl_udc, gadget); spin_lock_irqsave(&udc->lock, flags); - VDBG("VBUS %s", is_active ? "on" : "off"); + dev_vdbg(&gadget->dev, "VBUS %s\n", is_active ? "on" : "off"); udc->vbus_active = (is_active != 0); if (can_pullup(udc)) fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), @@ -1543,7 +1548,7 @@ static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0, udc->ep0_state = WAIT_FOR_SETUP; break; case WAIT_FOR_SETUP: - ERR("Unexpected ep0 packets\n"); + dev_err(&udc->gadget.dev, "Unexpected ep0 packets\n"); break; default: ep0stall(udc); @@ -1612,7 +1617,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe, errors = hc32_to_cpu(curr_td->size_ioc_sts); if (errors & DTD_ERROR_MASK) { if (errors & DTD_STATUS_HALTED) { - ERR("dTD error %08x QH=%d\n", errors, pipe); + dev_err(&udc->gadget.dev, "dTD error %08x QH=%d\n", errors, pipe); /* Clear the errors and Halt condition */ tmp = hc32_to_cpu(curr_qh->size_ioc_int_sts); tmp &= ~errors; @@ -1623,32 +1628,35 @@ static int process_ep_req(struct fsl_udc *udc, int pipe, break; } if (errors & DTD_STATUS_DATA_BUFF_ERR) { - VDBG("Transfer overflow"); + dev_vdbg(&udc->gadget.dev, "Transfer overflow\n"); status = -EPROTO; break; } else if (errors & DTD_STATUS_TRANSACTION_ERR) { - VDBG("ISO error"); + dev_vdbg(&udc->gadget.dev, "ISO error\n"); status = -EILSEQ; break; } else - ERR("Unknown error has occurred (0x%x)!\n", + dev_err(&udc->gadget.dev, + "Unknown error has occurred (0x%x)!\n", errors); } else if (hc32_to_cpu(curr_td->size_ioc_sts) & DTD_STATUS_ACTIVE) { - VDBG("Request not complete"); + dev_vdbg(&udc->gadget.dev, "Request not complete\n"); status = REQ_UNCOMPLETE; return status; } else if (remaining_length) { if (direction) { - VDBG("Transmit dTD remaining length not zero"); + dev_vdbg(&udc->gadget.dev, + "Transmit dTD remaining length not zero\n"); status = -EPROTO; break; } else { break; } } else { - VDBG("dTD transmitted successful"); + dev_vdbg(&udc->gadget.dev, + "dTD transmitted successful\n"); } if (j != curr_req->dtd_count - 1) @@ -1691,7 +1699,7 @@ static void dtd_complete_irq(struct fsl_udc *udc) /* If the ep is configured */ if (!curr_ep->ep.name) { - WARNING("Invalid EP?"); + dev_warn(&udc->gadget.dev, "Invalid EP?\n"); continue; } @@ -1700,8 +1708,9 @@ static void dtd_complete_irq(struct fsl_udc *udc) queue) { status = process_ep_req(udc, i, curr_req); - VDBG("status of process_ep_req= %d, ep = %d", - status, ep_num); + dev_vdbg(&udc->gadget.dev, + "status of process_ep_req= %d, ep = %d\n", + status, ep_num); if (status == REQ_UNCOMPLETE) break; /* write back status to req */ @@ -1820,7 +1829,7 @@ static void reset_irq(struct fsl_udc *udc) while (fsl_readl(&dr_regs->endpointprime)) { /* Wait until all endptprime bits cleared */ if (time_after(jiffies, timeout)) { - ERR("Timeout for reset\n"); + dev_err(&udc->gadget.dev, "Timeout for reset\n"); break; } cpu_relax(); @@ -1830,7 +1839,7 @@ static void reset_irq(struct fsl_udc *udc) fsl_writel(0xffffffff, &dr_regs->endptflush); if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) { - VDBG("Bus reset"); + dev_vdbg(&udc->gadget.dev, "Bus reset\n"); /* Bus is reseting */ udc->bus_reset = 1; /* Reset all the queues, include XD, dTD, EP queue @@ -1838,7 +1847,7 @@ static void reset_irq(struct fsl_udc *udc) reset_queues(udc, true); udc->usb_state = USB_STATE_DEFAULT; } else { - VDBG("Controller reset"); + dev_vdbg(&udc->gadget.dev, "Controller reset\n"); /* initialize usb hw reg except for regs for EP, not * touch usbintr reg */ dr_controller_setup(udc); @@ -1872,7 +1881,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc) /* Clear notification bits */ fsl_writel(irq_src, &dr_regs->usbsts); - /* VDBG("irq_src [0x%8x]", irq_src); */ + /* dev_vdbg(&udc->gadget.dev, "irq_src [0x%8x]", irq_src); */ /* Need to resume? */ if (udc->usb_state == USB_STATE_SUSPENDED) @@ -1881,7 +1890,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc) /* USB Interrupt */ if (irq_src & USB_STS_INT) { - VDBG("Packet int"); + dev_vdbg(&udc->gadget.dev, "Packet int\n"); /* Setup package, we only support ep0 as control ep */ if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) { tripwire_handler(udc, 0, @@ -1910,7 +1919,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc) /* Reset Received */ if (irq_src & USB_STS_RESET) { - VDBG("reset int"); + dev_vdbg(&udc->gadget.dev, "reset int\n"); reset_irq(udc); status = IRQ_HANDLED; } @@ -1922,7 +1931,7 @@ static irqreturn_t fsl_udc_irq(int irq, void *_udc) } if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) { - VDBG("Error IRQ %x", irq_src); + dev_vdbg(&udc->gadget.dev, "Error IRQ %x\n", irq_src); } spin_unlock_irqrestore(&udc->lock, flags); @@ -1958,7 +1967,7 @@ static int fsl_udc_start(struct usb_gadget *g, udc_controller->transceiver->otg, &udc_controller->gadget); if (retval < 0) { - ERR("can't bind to transceiver\n"); + dev_err(&udc_controller->gadget.dev, "can't bind to transceiver\n"); udc_controller->driver = NULL; return retval; } @@ -2243,7 +2252,7 @@ static int struct_udc_setup(struct fsl_udc *udc, udc->eps = kcalloc(udc->max_ep, sizeof(struct fsl_ep), GFP_KERNEL); if (!udc->eps) { - ERR("kmalloc udc endpoint status failed\n"); + dev_err(&udc->gadget.dev, "kmalloc udc endpoint status failed\n"); goto eps_alloc_failed; } @@ -2258,7 +2267,7 @@ static int struct_udc_setup(struct fsl_udc *udc, udc->ep_qh = dma_alloc_coherent(&pdev->dev, size, &udc->ep_qh_dma, GFP_KERNEL); if (!udc->ep_qh) { - ERR("malloc QHs for udc failed\n"); + dev_err(&udc->gadget.dev, "malloc QHs for udc failed\n"); goto ep_queue_alloc_failed; } @@ -2269,14 +2278,14 @@ static int struct_udc_setup(struct fsl_udc *udc, udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL), struct fsl_req, req); if (!udc->status_req) { - ERR("kzalloc for udc status request failed\n"); + dev_err(&udc->gadget.dev, "kzalloc for udc status request failed\n"); goto udc_status_alloc_failed; } /* allocate a small amount of memory to get valid address */ udc->status_req->req.buf = kmalloc(8, GFP_KERNEL); if (!udc->status_req->req.buf) { - ERR("kzalloc for udc request buffer failed\n"); + dev_err(&udc->gadget.dev, "kzalloc for udc request buffer failed\n"); goto udc_req_buf_alloc_failed; } @@ -2373,7 +2382,7 @@ static int fsl_udc_probe(struct platform_device *pdev) if (pdata->operating_mode == FSL_USB2_DR_OTG) { udc_controller->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); if (IS_ERR_OR_NULL(udc_controller->transceiver)) { - ERR("Can't find OTG driver!\n"); + dev_err(&udc_controller->gadget.dev, "Can't find OTG driver!\n"); ret = -ENODEV; goto err_kfree; } @@ -2389,7 +2398,7 @@ static int fsl_udc_probe(struct platform_device *pdev) if (pdata->operating_mode == FSL_USB2_DR_DEVICE) { if (!request_mem_region(res->start, resource_size(res), driver_name)) { - ERR("request mem region for %s failed\n", pdev->name); + dev_err(&udc_controller->gadget.dev, "request mem region for %s failed\n", pdev->name); ret = -EBUSY; goto err_kfree; } @@ -2420,7 +2429,7 @@ static int fsl_udc_probe(struct platform_device *pdev) /* Read Device Controller Capability Parameters register */ dccparams = fsl_readl(&dr_regs->dccparams); if (!(dccparams & DCCPARAMS_DC)) { - ERR("This SOC doesn't support device role\n"); + dev_err(&udc_controller->gadget.dev, "This SOC doesn't support device role\n"); ret = -ENODEV; goto err_exit; } @@ -2438,14 +2447,14 @@ static int fsl_udc_probe(struct platform_device *pdev) ret = request_irq(udc_controller->irq, fsl_udc_irq, IRQF_SHARED, driver_name, udc_controller); if (ret != 0) { - ERR("cannot request irq %d err %d\n", + dev_err(&udc_controller->gadget.dev, "cannot request irq %d err %d\n", udc_controller->irq, ret); goto err_exit; } /* Initialize the udc structure including QH member and other member */ if (struct_udc_setup(udc_controller, pdev)) { - ERR("Can't initialize udc data structure\n"); + dev_err(&udc_controller->gadget.dev, "Can't initialize udc data structure\n"); ret = -ENOMEM; goto err_free_irq; } @@ -2486,7 +2495,7 @@ static int fsl_udc_probe(struct platform_device *pdev) /* setup the udc->eps[] for non-control endpoints and link * to gadget.ep_list */ for (i = 1; i < (int)(udc_controller->max_ep / 2); i++) { - char name[14]; + char name[16]; sprintf(name, "ep%dout", i); struct_ep_setup(udc_controller, i * 2, name, 1); @@ -2666,6 +2675,15 @@ static const struct platform_device_id fsl_udc_devtype[] = { } }; MODULE_DEVICE_TABLE(platform, fsl_udc_devtype); + +static const struct of_device_id fsl_udc_dt_ids[] = { + { .compatible = "fsl-usb2-dr" }, + { .compatible = "fsl-usb2-mph" }, + { .compatible = "fsl,mpc5121-usb2-dr" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, fsl_udc_dt_ids); + static struct platform_driver udc_driver = { .probe = fsl_udc_probe, .remove_new = fsl_udc_remove, @@ -2675,6 +2693,7 @@ static struct platform_driver udc_driver = { .resume = fsl_udc_resume, .driver = { .name = driver_name, + .of_match_table = fsl_udc_dt_ids, /* udc suspend/resume called from OTG driver */ .suspend = fsl_udc_otg_suspend, .resume = fsl_udc_otg_resume, diff --git a/drivers/usb/gadget/udc/fsl_usb2_udc.h b/drivers/usb/gadget/udc/fsl_usb2_udc.h index 2efc5a930b48e..cc1756f3e89d1 100644 --- a/drivers/usb/gadget/udc/fsl_usb2_udc.h +++ b/drivers/usb/gadget/udc/fsl_usb2_udc.h @@ -508,53 +508,6 @@ struct fsl_udc { /*-------------------------------------------------------------------------*/ -#ifdef DEBUG -#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt "\n", \ - __func__, ## args) -#else -#define DBG(fmt, args...) do{}while(0) -#endif - -#if 0 -static void dump_msg(const char *label, const u8 * buf, unsigned int length) -{ - unsigned int start, num, i; - char line[52], *p; - - if (length >= 512) - return; - DBG("%s, length %u:\n", label, length); - start = 0; - while (length > 0) { - num = min(length, 16u); - p = line; - for (i = 0; i < num; ++i) { - if (i == 8) - *p++ = ' '; - sprintf(p, " %02x", buf[i]); - p += 3; - } - *p = 0; - printk(KERN_DEBUG "%6x: %s\n", start, line); - buf += num; - start += num; - length -= num; - } -} -#endif - -#ifdef VERBOSE -#define VDBG DBG -#else -#define VDBG(stuff...) do{}while(0) -#endif - -#define ERR(stuff...) pr_err("udc: " stuff) -#define WARNING(stuff...) pr_warn("udc: " stuff) -#define INFO(stuff...) pr_info("udc: " stuff) - -/*-------------------------------------------------------------------------*/ - /* ### Add board specific defines here */ diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c index 12e76bb62c209..19bbc38f3d35d 100644 --- a/drivers/usb/gadget/udc/net2272.c +++ b/drivers/usb/gadget/udc/net2272.c @@ -2650,7 +2650,7 @@ net2272_plat_probe(struct platform_device *pdev) goto err_req; } - ret = net2272_probe_fin(dev, IRQF_TRIGGER_LOW); + ret = net2272_probe_fin(dev, irqflags); if (ret) goto err_io; diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index 61424cfd2e1cb..1a6317e4b2a32 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -24,7 +24,6 @@ #include <linux/byteorder/generic.h> #include <linux/platform_data/pxa2xx_udc.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/usb.h> #include <linux/usb/ch9.h> diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c index 547af2ed9e5e0..ba5a066905077 100644 --- a/drivers/usb/gadget/udc/snps_udc_plat.c +++ b/drivers/usb/gadget/udc/snps_udc_plat.c @@ -8,7 +8,6 @@ #include <linux/extcon.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> #include <linux/module.h> diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c index cb85168fd00c2..7aa46d426f31b 100644 --- a/drivers/usb/gadget/udc/tegra-xudc.c +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -3491,8 +3491,8 @@ static void tegra_xudc_device_params_init(struct tegra_xudc *xudc) static int tegra_xudc_phy_get(struct tegra_xudc *xudc) { - int err = 0, usb3; - unsigned int i; + int err = 0, usb3_companion_port; + unsigned int i, j; xudc->utmi_phy = devm_kcalloc(xudc->dev, xudc->soc->num_phys, sizeof(*xudc->utmi_phy), GFP_KERNEL); @@ -3520,7 +3520,7 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc) if (IS_ERR(xudc->utmi_phy[i])) { err = PTR_ERR(xudc->utmi_phy[i]); dev_err_probe(xudc->dev, err, - "failed to get usb2-%d PHY\n", i); + "failed to get PHY for phy-name usb2-%d\n", i); goto clean_up; } else if (xudc->utmi_phy[i]) { /* Get usb-phy, if utmi phy is available */ @@ -3539,19 +3539,30 @@ static int tegra_xudc_phy_get(struct tegra_xudc *xudc) } /* Get USB3 phy */ - usb3 = tegra_xusb_padctl_get_usb3_companion(xudc->padctl, i); - if (usb3 < 0) + usb3_companion_port = tegra_xusb_padctl_get_usb3_companion(xudc->padctl, i); + if (usb3_companion_port < 0) continue; - snprintf(phy_name, sizeof(phy_name), "usb3-%d", usb3); - xudc->usb3_phy[i] = devm_phy_optional_get(xudc->dev, phy_name); - if (IS_ERR(xudc->usb3_phy[i])) { - err = PTR_ERR(xudc->usb3_phy[i]); - dev_err_probe(xudc->dev, err, - "failed to get usb3-%d PHY\n", usb3); - goto clean_up; - } else if (xudc->usb3_phy[i]) - dev_dbg(xudc->dev, "usb3-%d PHY registered", usb3); + for (j = 0; j < xudc->soc->num_phys; j++) { + snprintf(phy_name, sizeof(phy_name), "usb3-%d", j); + xudc->usb3_phy[i] = devm_phy_optional_get(xudc->dev, phy_name); + if (IS_ERR(xudc->usb3_phy[i])) { + err = PTR_ERR(xudc->usb3_phy[i]); + dev_err_probe(xudc->dev, err, + "failed to get PHY for phy-name usb3-%d\n", j); + goto clean_up; + } else if (xudc->usb3_phy[i]) { + int usb2_port = + tegra_xusb_padctl_get_port_number(xudc->utmi_phy[i]); + int usb3_port = + tegra_xusb_padctl_get_port_number(xudc->usb3_phy[i]); + if (usb3_port == usb3_companion_port) { + dev_dbg(xudc->dev, "USB2 port %d is paired with USB3 port %d for device mode port %d\n", + usb2_port, usb3_port, i); + break; + } + } + } } return err; diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 6c47ab0a491d5..ad145a54ca74e 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -66,6 +66,15 @@ struct orion_ehci_hcd { static struct hc_driver __read_mostly ehci_orion_hc_driver; /* + * Legacy DMA mask is 32 bit. + * AC5 has the DDR starting at 8GB, hence it requires + * a larger (34-bit) DMA mask, in order for DMA allocations + * to succeed: + */ +static const u64 dma_mask_orion = DMA_BIT_MASK(32); +static const u64 dma_mask_ac5 = DMA_BIT_MASK(34); + +/* * Implement Orion USB controller specification guidelines */ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd) @@ -211,6 +220,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) int irq, err; enum orion_ehci_phy_ver phy_version; struct orion_ehci_hcd *priv; + u64 *dma_mask_ptr; if (usb_disabled()) return -ENODEV; @@ -228,7 +238,8 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) * set. Since shared usb code relies on it, set it here for * now. Once we have dma capability bindings this can go away. */ - err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + dma_mask_ptr = (u64 *)of_device_get_match_data(&pdev->dev); + err = dma_coerce_mask_and_coherent(&pdev->dev, *dma_mask_ptr); if (err) goto err; @@ -332,8 +343,9 @@ static void ehci_orion_drv_remove(struct platform_device *pdev) } static const struct of_device_id ehci_orion_dt_ids[] = { - { .compatible = "marvell,orion-ehci", }, - { .compatible = "marvell,armada-3700-ehci", }, + { .compatible = "marvell,orion-ehci", .data = &dma_mask_orion}, + { .compatible = "marvell,armada-3700-ehci", .data = &dma_mask_orion}, + { .compatible = "marvell,ac5-ehci", .data = &dma_mask_ac5}, {}, }; MODULE_DEVICE_TABLE(of, ehci_orion_dt_ids); diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index 357d9aee38a37..3348c25ddb18d 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -27,7 +27,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/of_platform.h> -#include <linux/of_gpio.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/pxa2xx_udc.h> #include <linux/platform_device.h> diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 0956495bba575..2b871540bb500 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -585,6 +585,7 @@ done(struct sl811 *sl811, struct sl811h_ep *ep, u8 bank) finish_request(sl811, ep, urb, urbstat); } +#ifdef QUIRK2 static inline u8 checkdone(struct sl811 *sl811) { u8 ctl; @@ -616,6 +617,7 @@ static inline u8 checkdone(struct sl811 *sl811) #endif return irqstat; } +#endif static irqreturn_t sl811h_irq(struct usb_hcd *hcd) { diff --git a/drivers/usb/host/xhci-caps.h b/drivers/usb/host/xhci-caps.h new file mode 100644 index 0000000000000..9e94cebf4a56d --- /dev/null +++ b/drivers/usb/host/xhci-caps.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* hc_capbase bitmasks */ +/* bits 7:0 - how long is the Capabilities register */ +#define HC_LENGTH(p) XHCI_HC_LENGTH(p) +/* bits 31:16 */ +#define HC_VERSION(p) (((p) >> 16) & 0xffff) + +/* HCSPARAMS1 - hcs_params1 - bitmasks */ +/* bits 0:7, Max Device Slots */ +#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff) +#define HCS_SLOTS_MASK 0xff +/* bits 8:18, Max Interrupters */ +#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff) +/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */ +#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f) + +/* HCSPARAMS2 - hcs_params2 - bitmasks */ +/* bits 0:3, frames or uframes that SW needs to queue transactions + * ahead of the HW to meet periodic deadlines */ +#define HCS_IST(p) (((p) >> 0) & 0xf) +/* bits 4:7, max number of Event Ring segments */ +#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf) +/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */ +/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */ +/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */ +#define HCS_MAX_SCRATCHPAD(p) ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f)) + +/* HCSPARAMS3 - hcs_params3 - bitmasks */ +/* bits 0:7, Max U1 to U0 latency for the roothub ports */ +#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff) +/* bits 16:31, Max U2 to U0 latency for the roothub ports */ +#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff) + +/* HCCPARAMS - hcc_params - bitmasks */ +/* true: HC can use 64-bit address pointers */ +#define HCC_64BIT_ADDR(p) ((p) & (1 << 0)) +/* true: HC can do bandwidth negotiation */ +#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1)) +/* true: HC uses 64-byte Device Context structures + * FIXME 64-byte context structures aren't supported yet. + */ +#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2)) +/* true: HC has port power switches */ +#define HCC_PPC(p) ((p) & (1 << 3)) +/* true: HC has port indicators */ +#define HCS_INDICATOR(p) ((p) & (1 << 4)) +/* true: HC has Light HC Reset Capability */ +#define HCC_LIGHT_RESET(p) ((p) & (1 << 5)) +/* true: HC supports latency tolerance messaging */ +#define HCC_LTC(p) ((p) & (1 << 6)) +/* true: no secondary Stream ID Support */ +#define HCC_NSS(p) ((p) & (1 << 7)) +/* true: HC supports Stopped - Short Packet */ +#define HCC_SPC(p) ((p) & (1 << 9)) +/* true: HC has Contiguous Frame ID Capability */ +#define HCC_CFC(p) ((p) & (1 << 11)) +/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */ +#define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1)) +/* Extended Capabilities pointer from PCI base - section 5.3.6 */ +#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p) + +#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32) + +/* db_off bitmask - bits 0:1 reserved */ +#define DBOFF_MASK (~0x3) + +/* run_regs_off bitmask - bits 0:4 reserved */ +#define RTSOFF_MASK (~0x1f) + +/* HCCPARAMS2 - hcc_params2 - bitmasks */ +/* true: HC supports U3 entry Capability */ +#define HCC2_U3C(p) ((p) & (1 << 0)) +/* true: HC supports Configure endpoint command Max exit latency too large */ +#define HCC2_CMC(p) ((p) & (1 << 1)) +/* true: HC supports Force Save context Capability */ +#define HCC2_FSC(p) ((p) & (1 << 2)) +/* true: HC supports Compliance Transition Capability */ +#define HCC2_CTC(p) ((p) & (1 << 3)) +/* true: HC support Large ESIT payload Capability > 48k */ +#define HCC2_LEC(p) ((p) & (1 << 4)) +/* true: HC support Configuration Information Capability */ +#define HCC2_CIC(p) ((p) & (1 << 5)) +/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */ +#define HCC2_ETC(p) ((p) & (1 << 6)) diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index d82935d31126d..8a9869ef0db66 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -634,7 +634,8 @@ static int xhci_dbc_start(struct xhci_dbc *dbc) return ret; } - return mod_delayed_work(system_wq, &dbc->event_work, 1); + return mod_delayed_work(system_wq, &dbc->event_work, + msecs_to_jiffies(dbc->poll_interval)); } static void xhci_dbc_stop(struct xhci_dbc *dbc) @@ -899,8 +900,10 @@ static void xhci_dbc_handle_events(struct work_struct *work) enum evtreturn evtr; struct xhci_dbc *dbc; unsigned long flags; + unsigned int poll_interval; dbc = container_of(to_delayed_work(work), struct xhci_dbc, event_work); + poll_interval = dbc->poll_interval; spin_lock_irqsave(&dbc->lock, flags); evtr = xhci_dbc_do_handle_events(dbc); @@ -916,13 +919,18 @@ static void xhci_dbc_handle_events(struct work_struct *work) dbc->driver->disconnect(dbc); break; case EVT_DONE: + /* set fast poll rate if there are pending data transfers */ + if (!list_empty(&dbc->eps[BULK_OUT].list_pending) || + !list_empty(&dbc->eps[BULK_IN].list_pending)) + poll_interval = 1; break; default: dev_info(dbc->dev, "stop handling dbc events\n"); return; } - mod_delayed_work(system_wq, &dbc->event_work, 1); + mod_delayed_work(system_wq, &dbc->event_work, + msecs_to_jiffies(poll_interval)); } static const char * const dbc_state_strings[DS_MAX] = { @@ -1175,6 +1183,7 @@ xhci_alloc_dbc(struct device *dev, void __iomem *base, const struct dbc_driver * dbc->idVendor = DBC_VENDOR_ID; dbc->bcdDevice = DBC_DEVICE_REV; dbc->bInterfaceProtocol = DBC_PROTOCOL; + dbc->poll_interval = DBC_POLL_INTERVAL_DEFAULT; if (readl(&dbc->regs->control) & DBC_CTRL_DBC_ENABLE) goto err; diff --git a/drivers/usb/host/xhci-dbgcap.h b/drivers/usb/host/xhci-dbgcap.h index e39e3ae1677ae..92661b555c2a2 100644 --- a/drivers/usb/host/xhci-dbgcap.h +++ b/drivers/usb/host/xhci-dbgcap.h @@ -94,6 +94,7 @@ struct dbc_ep { #define DBC_QUEUE_SIZE 16 #define DBC_WRITE_BUF_SIZE 8192 +#define DBC_POLL_INTERVAL_DEFAULT 64 /* milliseconds */ /* * Private structure for DbC hardware state: @@ -140,6 +141,7 @@ struct xhci_dbc { enum dbc_state state; struct delayed_work event_work; + unsigned int poll_interval; /* ms */ unsigned resume_required:1; struct dbc_ep eps[2]; diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 0980ade2a234a..61f083de6e196 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -448,38 +448,6 @@ u32 xhci_port_state_to_neutral(u32 state) } EXPORT_SYMBOL_GPL(xhci_port_state_to_neutral); -/** - * xhci_find_slot_id_by_port() - Find slot id of a usb device on a roothub port - * @hcd: pointer to hcd of the roothub - * @xhci: pointer to xhci structure - * @port: one-based port number of the port in this roothub. - * - * Return: Slot id of the usb device connected to the root port, 0 if not found - */ - -int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, - u16 port) -{ - int slot_id; - int i; - enum usb_device_speed speed; - - slot_id = 0; - for (i = 0; i < MAX_HC_SLOTS; i++) { - if (!xhci->devs[i] || !xhci->devs[i]->udev) - continue; - speed = xhci->devs[i]->udev->speed; - if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3)) - && xhci->devs[i]->fake_port == port) { - slot_id = i; - break; - } - } - - return slot_id; -} -EXPORT_SYMBOL_GPL(xhci_find_slot_id_by_port); - /* * Stop device * It issues stop endpoint command for EP 0 to 30. And wait the last command @@ -930,7 +898,6 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port, struct xhci_bus_state *bus_state; struct xhci_hcd *xhci; struct usb_hcd *hcd; - int slot_id; u32 wIndex; hcd = port->rhub->hcd; @@ -986,13 +953,11 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port, spin_lock_irqsave(&xhci->lock, *flags); if (time_left) { - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - wIndex + 1); - if (!slot_id) { + if (!port->slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); return -ENODEV; } - xhci_ring_device(xhci, slot_id); + xhci_ring_device(xhci, port->slot_id); } else { int port_status = readl(port->addr); @@ -1202,7 +1167,6 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, unsigned long flags; u32 temp, status; int retval = 0; - int slot_id; struct xhci_bus_state *bus_state; u16 link_state = 0; u16 wake_mask = 0; @@ -1332,15 +1296,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; } - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - portnum1); - if (!slot_id) { + if (!port->slot_id) { xhci_warn(xhci, "slot_id is zero\n"); goto error; } /* unlock to execute stop endpoint commands */ spin_unlock_irqrestore(&xhci->lock, flags); - xhci_stop_device(xhci, slot_id, 1); + xhci_stop_device(xhci, port->slot_id, 1); spin_lock_irqsave(&xhci->lock, flags); xhci_set_link_state(xhci, port, XDEV_U3); @@ -1463,14 +1425,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (link_state == USB_SS_PORT_LS_U3) { int retries = 16; - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - portnum1); - if (slot_id) { + if (port->slot_id) { /* unlock to execute stop endpoint * commands */ spin_unlock_irqrestore(&xhci->lock, flags); - xhci_stop_device(xhci, slot_id, 1); + xhci_stop_device(xhci, port->slot_id, 1); spin_lock_irqsave(&xhci->lock, flags); } xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U3); @@ -1584,13 +1544,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } bus_state->port_c_suspend |= 1 << wIndex; - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - portnum1); - if (!slot_id) { + if (!port->slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto error; } - xhci_ring_device(xhci, slot_id); + xhci_ring_device(xhci, port->slot_id); break; case USB_PORT_FEAT_C_SUSPEND: bus_state->port_c_suspend &= ~(1 << wIndex); @@ -1821,10 +1779,7 @@ retry: if (!portsc_buf[port_index]) continue; if (test_bit(port_index, &bus_state->bus_suspended)) { - int slot_id; - - slot_id = xhci_find_slot_id_by_port(hcd, xhci, - port_index + 1); + int slot_id = ports[port_index]->slot_id; if (slot_id) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_stop_device(xhci, slot_id, 1); @@ -1877,7 +1832,6 @@ int xhci_bus_resume(struct usb_hcd *hcd) struct xhci_bus_state *bus_state; unsigned long flags; int max_ports, port_index; - int slot_id; int sret; u32 next_state; u32 temp, portsc; @@ -1970,9 +1924,8 @@ int xhci_bus_resume(struct usb_hcd *hcd) continue; } xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC); - slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1); - if (slot_id) - xhci_ring_device(xhci, slot_id); + if (ports[port_index]->slot_id) + xhci_ring_device(xhci, ports[port_index]->slot_id); } (void) readl(&xhci->op_regs->command); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index a7716202a8dd5..69dd866698833 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -84,7 +84,7 @@ static void xhci_free_segments_for_ring(struct xhci_hcd *xhci, struct xhci_segment *seg; seg = first->next; - while (seg != first) { + while (seg && seg != first) { struct xhci_segment *next = seg->next; xhci_segment_free(xhci, seg); seg = next; @@ -351,17 +351,10 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci, next = xhci_segment_alloc(xhci, cycle_state, max_packet, num, flags); - if (!next) { - prev = *first; - while (prev) { - next = prev->next; - xhci_segment_free(xhci, prev); - prev = next; - } - return -ENOMEM; - } - xhci_link_segments(prev, next, type, chain_links); + if (!next) + goto free_segments; + xhci_link_segments(prev, next, type, chain_links); prev = next; num++; } @@ -369,6 +362,10 @@ static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci, *last = prev; return 0; + +free_segments: + xhci_free_segments_for_ring(xhci, *first); + return -ENOMEM; } /* @@ -444,19 +441,11 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, if (ret) return -ENOMEM; - if (ring->type == TYPE_STREAM) + if (ring->type == TYPE_STREAM) { ret = xhci_update_stream_segment_mapping(ring->trb_address_map, ring, first, last, flags); - if (ret) { - struct xhci_segment *next; - do { - next = first->next; - xhci_segment_free(xhci, first); - if (first == last) - break; - first = next; - } while (true); - return ret; + if (ret) + goto free_segments; } xhci_link_rings(xhci, ring, first, last, num_new_segs); @@ -466,6 +455,10 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, ring->num_segs); return 0; + +free_segments: + xhci_free_segments_for_ring(xhci, first); + return ret; } struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci, @@ -789,15 +782,14 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci, bool slot_found = false; /* If the device never made it past the Set Address stage, - * it may not have the real_port set correctly. + * it may not have the root hub port pointer set correctly. */ - if (virt_dev->real_port == 0 || - virt_dev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) { - xhci_dbg(xhci, "Bad real port.\n"); + if (!virt_dev->rhub_port) { + xhci_dbg(xhci, "Bad rhub port.\n"); return; } - tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts); + tt_list_head = &(xhci->rh_bw[virt_dev->rhub_port->hw_portnum].tts); list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) { /* Multi-TT hubs will have more than one entry */ if (tt_info->slot_id == slot_id) { @@ -834,7 +826,7 @@ int xhci_alloc_tt_info(struct xhci_hcd *xhci, goto free_tts; INIT_LIST_HEAD(&tt_info->tt_list); list_add(&tt_info->tt_list, - &xhci->rh_bw[virt_dev->real_port - 1].tts); + &xhci->rh_bw[virt_dev->rhub_port->hw_portnum].tts); tt_info->slot_id = virt_dev->udev->slot_id; if (tt->multi) tt_info->ttport = i+1; @@ -908,6 +900,8 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) if (dev->udev && dev->udev->slot_id) dev->udev->slot_id = 0; + if (dev->rhub_port && dev->rhub_port->slot_id == slot_id) + dev->rhub_port->slot_id = 0; kfree(xhci->devs[slot_id]); xhci->devs[slot_id] = NULL; } @@ -929,13 +923,12 @@ static void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_i if (!vdev) return; - if (vdev->real_port == 0 || - vdev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) { - xhci_dbg(xhci, "Bad vdev->real_port.\n"); + if (!vdev->rhub_port) { + xhci_dbg(xhci, "Bad rhub port.\n"); goto out; } - tt_list_head = &(xhci->rh_bw[vdev->real_port - 1].tts); + tt_list_head = &(xhci->rh_bw[vdev->rhub_port->hw_portnum].tts); list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) { /* is this a hub device that added a tt_info to the tts list */ if (tt_info->slot_id == slot_id) { @@ -1051,16 +1044,16 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, * The xHCI roothub may have ports of differing speeds in any order in the port * status registers. * - * The xHCI hardware wants to know the roothub port number that the USB device + * The xHCI hardware wants to know the roothub port that the USB device * is attached to (or the roothub port its ancestor hub is attached to). All we * know is the index of that port under either the USB 2.0 or the USB 3.0 * roothub, but that doesn't give us the real index into the HW port status - * registers. Call xhci_find_raw_port_number() to get real index. + * registers. */ -static u32 xhci_find_real_port_number(struct xhci_hcd *xhci, - struct usb_device *udev) +static struct xhci_port *xhci_find_rhub_port(struct xhci_hcd *xhci, struct usb_device *udev) { struct usb_device *top_dev; + struct xhci_hub *rhub; struct usb_hcd *hcd; if (udev->speed >= USB_SPEED_SUPER) @@ -1072,7 +1065,8 @@ static u32 xhci_find_real_port_number(struct xhci_hcd *xhci, top_dev = top_dev->parent) /* Found device below root hub */; - return xhci_find_raw_port_number(hcd, top_dev->portnum); + rhub = xhci_get_rhub(hcd); + return rhub->ports[top_dev->portnum - 1]; } /* Setup an xHCI virtual device for a Set Address command */ @@ -1081,9 +1075,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud struct xhci_virt_device *dev; struct xhci_ep_ctx *ep0_ctx; struct xhci_slot_ctx *slot_ctx; - u32 port_num; u32 max_packets; - struct usb_device *top_dev; dev = xhci->devs[udev->slot_id]; /* Slot ID 0 is reserved */ @@ -1124,18 +1116,15 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud return -EINVAL; } /* Find the root hub port this device is under */ - port_num = xhci_find_real_port_number(xhci, udev); - if (!port_num) + dev->rhub_port = xhci_find_rhub_port(xhci, udev); + if (!dev->rhub_port) return -EINVAL; - slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(port_num)); - /* Set the port number in the virtual_device to the faked port number */ - for (top_dev = udev; top_dev->parent && top_dev->parent->parent; - top_dev = top_dev->parent) - /* Found device below root hub */; - dev->fake_port = top_dev->portnum; - dev->real_port = port_num; - xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num); - xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->fake_port); + /* Slot ID is set to the device directly below the root hub */ + if (!udev->parent->parent) + dev->rhub_port->slot_id = udev->slot_id; + slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(dev->rhub_port->hw_portnum + 1)); + xhci_dbg(xhci, "Slot ID %d: HW portnum %d, hcd portnum %d\n", + udev->slot_id, dev->rhub_port->hw_portnum, dev->rhub_port->hcd_portnum); /* Find the right bandwidth table that this device will be a part of. * If this is a full speed device attached directly to a root port (or a @@ -1144,12 +1133,12 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud * will never be created for the HS root hub. */ if (!udev->tt || !udev->tt->hub->parent) { - dev->bw_table = &xhci->rh_bw[port_num - 1].bw_table; + dev->bw_table = &xhci->rh_bw[dev->rhub_port->hw_portnum].bw_table; } else { struct xhci_root_port_bw_info *rh_bw; struct xhci_tt_bw_info *tt_bw; - rh_bw = &xhci->rh_bw[port_num - 1]; + rh_bw = &xhci->rh_bw[dev->rhub_port->hw_portnum]; /* Find the right TT. */ list_for_each_entry(tt_bw, &rh_bw->tts, tt_list) { if (tt_bw->slot_id != udev->tt->hub->slot_id) @@ -2533,7 +2522,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) if (xhci_add_interrupter(xhci, ir, 0)) goto fail; - xhci->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX; + ir->isoc_bei_interval = AVOID_BEI_INTERVAL_MAX; /* * XXX: Might need to set the Interrupter Moderation Register to diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 61f3f8bbdcead..27eb384a39634 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -122,10 +122,6 @@ static u32 get_bw_boundary(enum usb_device_speed speed) * each HS root port is treated as a single bandwidth domain, * but each SS root port is treated as two bandwidth domains, one for IN eps, * one for OUT eps. -* @real_port value is defined as follow according to xHCI spec: -* 1 for SSport0, ..., N+1 for SSportN, N+2 for HSport0, N+3 for HSport1, etc -* so the bandwidth domain array is organized as follow for simplification: -* SSport0-OUT, SSport0-IN, ..., SSportX-OUT, SSportX-IN, HSport0, ..., HSportY */ static struct mu3h_sch_bw_info * get_bw_info(struct xhci_hcd_mtk *mtk, struct usb_device *udev, @@ -136,19 +132,19 @@ get_bw_info(struct xhci_hcd_mtk *mtk, struct usb_device *udev, int bw_index; virt_dev = xhci->devs[udev->slot_id]; - if (!virt_dev->real_port) { - WARN_ONCE(1, "%s invalid real_port\n", dev_name(&udev->dev)); + if (!virt_dev->rhub_port) { + WARN_ONCE(1, "%s invalid rhub port\n", dev_name(&udev->dev)); return NULL; } if (udev->speed >= USB_SPEED_SUPER) { if (usb_endpoint_dir_out(&ep->desc)) - bw_index = (virt_dev->real_port - 1) * 2; + bw_index = (virt_dev->rhub_port->hw_portnum) * 2; else - bw_index = (virt_dev->real_port - 1) * 2 + 1; + bw_index = (virt_dev->rhub_port->hw_portnum) * 2 + 1; } else { /* add one more for each SS port */ - bw_index = virt_dev->real_port + xhci->usb3_rhub.num_ports - 1; + bw_index = virt_dev->rhub_port->hw_portnum + xhci->usb3_rhub.num_ports; } return &mtk->sch_array[bw_index]; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index b534ca9752be4..93b6976480188 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -307,8 +307,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_RESET_ON_RESUME; } - if (pdev->vendor == PCI_VENDOR_ID_AMD) + if (pdev->vendor == PCI_VENDOR_ID_AMD) { xhci->quirks |= XHCI_TRUST_TX_LENGTH; + if (pdev->device == 0x43f7) + xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW; + } if ((pdev->vendor == PCI_VENDOR_ID_AMD) && ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) || @@ -820,7 +823,6 @@ static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup) struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_port *port; struct usb_device *udev; - unsigned int slot_id; u32 portsc; int i; @@ -843,15 +845,14 @@ static int xhci_pci_poweroff_late(struct usb_hcd *hcd, bool do_wakeup) if ((portsc & PORT_PLS_MASK) != XDEV_U3) continue; - slot_id = xhci_find_slot_id_by_port(port->rhub->hcd, xhci, - port->hcd_portnum + 1); - if (!slot_id || !xhci->devs[slot_id]) { + if (!port->slot_id || !xhci->devs[port->slot_id]) { xhci_err(xhci, "No dev for slot_id %d for port %d-%d in U3\n", - slot_id, port->rhub->hcd->self.busnum, port->hcd_portnum + 1); + port->slot_id, port->rhub->hcd->self.busnum, + port->hcd_portnum + 1); continue; } - udev = xhci->devs[slot_id]->udev; + udev = xhci->devs[port->slot_id]->udev; /* if wakeup is enabled then don't disable the port */ if (udev->do_remote_wakeup && do_wakeup) diff --git a/drivers/usb/host/xhci-port.h b/drivers/usb/host/xhci-port.h new file mode 100644 index 0000000000000..f19efb966d180 --- /dev/null +++ b/drivers/usb/host/xhci-port.h @@ -0,0 +1,176 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* PORTSC - Port Status and Control Register - port_status_base bitmasks */ +/* true: device connected */ +#define PORT_CONNECT (1 << 0) +/* true: port enabled */ +#define PORT_PE (1 << 1) +/* bit 2 reserved and zeroed */ +/* true: port has an over-current condition */ +#define PORT_OC (1 << 3) +/* true: port reset signaling asserted */ +#define PORT_RESET (1 << 4) +/* Port Link State - bits 5:8 + * A read gives the current link PM state of the port, + * a write with Link State Write Strobe set sets the link state. + */ +#define PORT_PLS_MASK (0xf << 5) +#define XDEV_U0 (0x0 << 5) +#define XDEV_U1 (0x1 << 5) +#define XDEV_U2 (0x2 << 5) +#define XDEV_U3 (0x3 << 5) +#define XDEV_DISABLED (0x4 << 5) +#define XDEV_RXDETECT (0x5 << 5) +#define XDEV_INACTIVE (0x6 << 5) +#define XDEV_POLLING (0x7 << 5) +#define XDEV_RECOVERY (0x8 << 5) +#define XDEV_HOT_RESET (0x9 << 5) +#define XDEV_COMP_MODE (0xa << 5) +#define XDEV_TEST_MODE (0xb << 5) +#define XDEV_RESUME (0xf << 5) + +/* true: port has power (see HCC_PPC) */ +#define PORT_POWER (1 << 9) +/* bits 10:13 indicate device speed: + * 0 - undefined speed - port hasn't be initialized by a reset yet + * 1 - full speed + * 2 - low speed + * 3 - high speed + * 4 - super speed + * 5-15 reserved + */ +#define DEV_SPEED_MASK (0xf << 10) +#define XDEV_FS (0x1 << 10) +#define XDEV_LS (0x2 << 10) +#define XDEV_HS (0x3 << 10) +#define XDEV_SS (0x4 << 10) +#define XDEV_SSP (0x5 << 10) +#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10)) +#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS) +#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS) +#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS) +#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS) +#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP) +#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS) +#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f) + +/* Bits 20:23 in the Slot Context are the speed for the device */ +#define SLOT_SPEED_FS (XDEV_FS << 10) +#define SLOT_SPEED_LS (XDEV_LS << 10) +#define SLOT_SPEED_HS (XDEV_HS << 10) +#define SLOT_SPEED_SS (XDEV_SS << 10) +#define SLOT_SPEED_SSP (XDEV_SSP << 10) +/* Port Indicator Control */ +#define PORT_LED_OFF (0 << 14) +#define PORT_LED_AMBER (1 << 14) +#define PORT_LED_GREEN (2 << 14) +#define PORT_LED_MASK (3 << 14) +/* Port Link State Write Strobe - set this when changing link state */ +#define PORT_LINK_STROBE (1 << 16) +/* true: connect status change */ +#define PORT_CSC (1 << 17) +/* true: port enable change */ +#define PORT_PEC (1 << 18) +/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port + * into an enabled state, and the device into the default state. A "warm" reset + * also resets the link, forcing the device through the link training sequence. + * SW can also look at the Port Reset register to see when warm reset is done. + */ +#define PORT_WRC (1 << 19) +/* true: over-current change */ +#define PORT_OCC (1 << 20) +/* true: reset change - 1 to 0 transition of PORT_RESET */ +#define PORT_RC (1 << 21) +/* port link status change - set on some port link state transitions: + * Transition Reason + * ------------------------------------------------------------------------------ + * - U3 to Resume Wakeup signaling from a device + * - Resume to Recovery to U0 USB 3.0 device resume + * - Resume to U0 USB 2.0 device resume + * - U3 to Recovery to U0 Software resume of USB 3.0 device complete + * - U3 to U0 Software resume of USB 2.0 device complete + * - U2 to U0 L1 resume of USB 2.1 device complete + * - U0 to U0 (???) L1 entry rejection by USB 2.1 device + * - U0 to disabled L1 entry error with USB 2.1 device + * - Any state to inactive Error on USB 3.0 port + */ +#define PORT_PLC (1 << 22) +/* port configure error change - port failed to configure its link partner */ +#define PORT_CEC (1 << 23) +#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ + PORT_RC | PORT_PLC | PORT_CEC) + + +/* Cold Attach Status - xHC can set this bit to report device attached during + * Sx state. Warm port reset should be perfomed to clear this bit and move port + * to connected state. + */ +#define PORT_CAS (1 << 24) +/* wake on connect (enable) */ +#define PORT_WKCONN_E (1 << 25) +/* wake on disconnect (enable) */ +#define PORT_WKDISC_E (1 << 26) +/* wake on over-current (enable) */ +#define PORT_WKOC_E (1 << 27) +/* bits 28:29 reserved */ +/* true: device is non-removable - for USB 3.0 roothub emulation */ +#define PORT_DEV_REMOVE (1 << 30) +/* Initiate a warm port reset - complete when PORT_WRC is '1' */ +#define PORT_WR (1 << 31) + +/* We mark duplicate entries with -1 */ +#define DUPLICATE_ENTRY ((u8)(-1)) + +/* Port Power Management Status and Control - port_power_base bitmasks */ +/* Inactivity timer value for transitions into U1, in microseconds. + * Timeout can be up to 127us. 0xFF means an infinite timeout. + */ +#define PORT_U1_TIMEOUT(p) ((p) & 0xff) +#define PORT_U1_TIMEOUT_MASK 0xff +/* Inactivity timer value for transitions into U2 */ +#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8) +#define PORT_U2_TIMEOUT_MASK (0xff << 8) +/* Bits 24:31 for port testing */ + +/* USB2 Protocol PORTSPMSC */ +#define PORT_L1S_MASK 7 +#define PORT_L1S_SUCCESS 1 +#define PORT_RWE (1 << 3) +#define PORT_HIRD(p) (((p) & 0xf) << 4) +#define PORT_HIRD_MASK (0xf << 4) +#define PORT_L1DS_MASK (0xff << 8) +#define PORT_L1DS(p) (((p) & 0xff) << 8) +#define PORT_HLE (1 << 16) +#define PORT_TEST_MODE_SHIFT 28 + +/* USB3 Protocol PORTLI Port Link Information */ +#define PORT_RX_LANES(p) (((p) >> 16) & 0xf) +#define PORT_TX_LANES(p) (((p) >> 20) & 0xf) + +/* USB2 Protocol PORTHLPMC */ +#define PORT_HIRDM(p)((p) & 3) +#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2) +#define PORT_BESLD(p)(((p) & 0xf) << 10) + +/* use 512 microseconds as USB2 LPM L1 default timeout. */ +#define XHCI_L1_TIMEOUT 512 + +/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency. + * Safe to use with mixed HIRD and BESL systems (host and device) and is used + * by other operating systems. + * + * XHCI 1.0 errata 8/14/12 Table 13 notes: + * "Software should choose xHC BESL/BESLD field values that do not violate a + * device's resume latency requirements, + * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached, + * or not program values < '4' if BLC = '0' and a BESL device is attached. + */ +#define XHCI_DEFAULT_BESL 4 + +/* + * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports + * to complete link training. usually link trainig completes much faster + * so check status 10 times with 36ms sleep in places we need to wait for + * polling to complete. + */ +#define XHCI_PORT_POLLING_LFPS_TIME 36 diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 4f64b814d4aa2..52278afea94be 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -113,6 +113,12 @@ static bool last_td_in_urb(struct xhci_td *td) return urb_priv->num_tds_done == urb_priv->num_tds; } +static bool unhandled_event_trb(struct xhci_ring *ring) +{ + return ((le32_to_cpu(ring->dequeue->event_cmd.flags) & TRB_CYCLE) == + ring->cycle_state); +} + static void inc_td_cnt(struct urb *urb) { struct urb_priv *urb_priv = urb->hcpriv; @@ -1154,6 +1160,15 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, break; ep->ep_state &= ~EP_STOP_CMD_PENDING; return; + case EP_STATE_STOPPED: + /* + * NEC uPD720200 sometimes sets this state and fails with + * Context Error while continuing to process TRBs. + * Be conservative and trust EP_CTX_STATE on other chips. + */ + if (!(xhci->quirks & XHCI_NEC_HOST)) + break; + fallthrough; case EP_STATE_RUNNING: /* Race, HW handled stop ep cmd before ep was running */ xhci_dbg(xhci, "Stop ep completion ctx error, ep is running\n"); @@ -1870,7 +1885,6 @@ static void handle_port_status(struct xhci_hcd *xhci, u32 port_id; u32 portsc, cmd_reg; int max_ports; - int slot_id; unsigned int hcd_portnum; struct xhci_bus_state *bus_state; bool bogus_port_status = false; @@ -1922,9 +1936,8 @@ static void handle_port_status(struct xhci_hcd *xhci, if (hcd->speed >= HCD_USB3 && (portsc & PORT_PLS_MASK) == XDEV_INACTIVE) { - slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1); - if (slot_id && xhci->devs[slot_id]) - xhci->devs[slot_id]->flags |= VDEV_PORT_ERROR; + if (port->slot_id && xhci->devs[port->slot_id]) + xhci->devs[port->slot_id]->flags |= VDEV_PORT_ERROR; } if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) { @@ -1982,9 +1995,8 @@ static void handle_port_status(struct xhci_hcd *xhci, * so the roothub behavior is consistent with external * USB 3.0 hub behavior. */ - slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1); - if (slot_id && xhci->devs[slot_id]) - xhci_ring_device(xhci, slot_id); + if (port->slot_id && xhci->devs[port->slot_id]) + xhci_ring_device(xhci, port->slot_id); if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) { xhci_test_and_clear_bit(xhci, port, PORT_PLC); usb_wakeup_notification(hcd->self.root_hub, @@ -2816,7 +2828,7 @@ static int handle_tx_event(struct xhci_hcd *xhci, td_num--; /* Is this a TRB in the currently executing TD? */ - ep_seg = trb_in_td(xhci, ep_ring->deq_seg, ep_ring->dequeue, + ep_seg = trb_in_td(xhci, td->start_seg, td->first_trb, td->last_trb, ep_trb_dma, false); /* @@ -2884,9 +2896,8 @@ static int handle_tx_event(struct xhci_hcd *xhci, "part of current TD ep_index %d " "comp_code %u\n", ep_index, trb_comp_code); - trb_in_td(xhci, ep_ring->deq_seg, - ep_ring->dequeue, td->last_trb, - ep_trb_dma, true); + trb_in_td(xhci, td->start_seg, td->first_trb, + td->last_trb, ep_trb_dma, true); return -ESHUTDOWN; } } @@ -2962,32 +2973,18 @@ err_out: } /* - * This function handles all OS-owned events on the event ring. It may drop + * This function handles one OS-owned event on the event ring. It may drop * xhci->lock between event processing (e.g. to pass up port status changes). - * Returns >0 for "possibly more events to process" (caller should call again), - * otherwise 0 if done. In future, <0 returns should indicate error code. */ -static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir) +static int xhci_handle_event_trb(struct xhci_hcd *xhci, struct xhci_interrupter *ir, + union xhci_trb *event) { - union xhci_trb *event; u32 trb_type; - /* Event ring hasn't been allocated yet. */ - if (!ir || !ir->event_ring || !ir->event_ring->dequeue) { - xhci_err(xhci, "ERROR interrupter not ready\n"); - return -ENOMEM; - } - - event = ir->event_ring->dequeue; - /* Does the HC or OS own the TRB? */ - if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) != - ir->event_ring->cycle_state) - return 0; - trace_xhci_handle_event(ir->event_ring, &event->generic); /* - * Barrier between reading the TRB_CYCLE (valid) flag above and any + * Barrier between reading the TRB_CYCLE (valid) flag before, and any * speculative reads of the event's flags/data below. */ rmb(); @@ -3017,18 +3014,11 @@ static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir) * to make sure a watchdog timer didn't mark the host as non-responsive. */ if (xhci->xhc_state & XHCI_STATE_DYING) { - xhci_dbg(xhci, "xHCI host dying, returning from " - "event handler.\n"); - return 0; + xhci_dbg(xhci, "xHCI host dying, returning from event handler.\n"); + return -ENODEV; } - /* Update SW event ring dequeue pointer */ - inc_deq(xhci, ir->event_ring); - - /* Are there more items on the event ring? Caller will call us again to - * check. - */ - return 1; + return 0; } /* @@ -3038,30 +3028,26 @@ static int xhci_handle_event(struct xhci_hcd *xhci, struct xhci_interrupter *ir) */ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, struct xhci_interrupter *ir, - union xhci_trb *event_ring_deq, bool clear_ehb) { u64 temp_64; dma_addr_t deq; temp_64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); - /* If necessary, update the HW's version of the event ring deq ptr. */ - if (event_ring_deq != ir->event_ring->dequeue) { - deq = xhci_trb_virt_to_dma(ir->event_ring->deq_seg, - ir->event_ring->dequeue); - if (deq == 0) - xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n"); - /* - * Per 4.9.4, Software writes to the ERDP register shall - * always advance the Event Ring Dequeue Pointer value. - */ - if ((temp_64 & ERST_PTR_MASK) == (deq & ERST_PTR_MASK)) - return; + deq = xhci_trb_virt_to_dma(ir->event_ring->deq_seg, + ir->event_ring->dequeue); + if (deq == 0) + xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n"); + /* + * Per 4.9.4, Software writes to the ERDP register shall always advance + * the Event Ring Dequeue Pointer value. + */ + if ((temp_64 & ERST_PTR_MASK) == (deq & ERST_PTR_MASK) && !clear_ehb) + return; - /* Update HC event ring dequeue pointer */ - temp_64 = ir->event_ring->deq_seg->num & ERST_DESI_MASK; - temp_64 |= deq & ERST_PTR_MASK; - } + /* Update HC event ring dequeue pointer */ + temp_64 = ir->event_ring->deq_seg->num & ERST_DESI_MASK; + temp_64 |= deq & ERST_PTR_MASK; /* Clear the event handler busy flag (RW1C) */ if (clear_ehb) @@ -3069,6 +3055,76 @@ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, xhci_write_64(xhci, temp_64, &ir->ir_set->erst_dequeue); } +/* Clear the interrupt pending bit for a specific interrupter. */ +static void xhci_clear_interrupt_pending(struct xhci_hcd *xhci, + struct xhci_interrupter *ir) +{ + if (!ir->ip_autoclear) { + u32 irq_pending; + + irq_pending = readl(&ir->ir_set->irq_pending); + irq_pending |= IMAN_IP; + writel(irq_pending, &ir->ir_set->irq_pending); + } +} + +/* + * Handle all OS-owned events on an interrupter event ring. It may drop + * and reaquire xhci->lock between event processing. + */ +static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir) +{ + int event_loop = 0; + int err; + u64 temp; + + xhci_clear_interrupt_pending(xhci, ir); + + /* Event ring hasn't been allocated yet. */ + if (!ir->event_ring || !ir->event_ring->dequeue) { + xhci_err(xhci, "ERROR interrupter event ring not ready\n"); + return -ENOMEM; + } + + if (xhci->xhc_state & XHCI_STATE_DYING || + xhci->xhc_state & XHCI_STATE_HALTED) { + xhci_dbg(xhci, "xHCI dying, ignoring interrupt. Shouldn't IRQs be disabled?\n"); + + /* Clear the event handler busy flag (RW1C) */ + temp = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); + xhci_write_64(xhci, temp | ERST_EHB, &ir->ir_set->erst_dequeue); + return -ENODEV; + } + + /* Process all OS owned event TRBs on this event ring */ + while (unhandled_event_trb(ir->event_ring)) { + err = xhci_handle_event_trb(xhci, ir, ir->event_ring->dequeue); + + /* + * If half a segment of events have been handled in one go then + * update ERDP, and force isoc trbs to interrupt more often + */ + if (event_loop++ > TRBS_PER_SEGMENT / 2) { + xhci_update_erst_dequeue(xhci, ir, false); + + if (ir->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN) + ir->isoc_bei_interval = ir->isoc_bei_interval / 2; + + event_loop = 0; + } + + /* Update SW event ring dequeue pointer */ + inc_deq(xhci, ir->event_ring); + + if (err) + break; + } + + xhci_update_erst_dequeue(xhci, ir, true); + + return 0; +} + /* * xHCI spec says we can get an interrupt, and if the HC has an error condition, * we might get bad data out of the event ring. Section 4.10.2.7 has a list of @@ -3077,12 +3133,8 @@ static void xhci_update_erst_dequeue(struct xhci_hcd *xhci, irqreturn_t xhci_irq(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - union xhci_trb *event_ring_deq; - struct xhci_interrupter *ir; irqreturn_t ret = IRQ_NONE; - u64 temp_64; u32 status; - int event_loop = 0; spin_lock(&xhci->lock); /* Check if the xHC generated the interrupt, or the irq is shared */ @@ -3115,50 +3167,10 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) */ status |= STS_EINT; writel(status, &xhci->op_regs->status); - - /* This is the handler of the primary interrupter */ - ir = xhci->interrupters[0]; - if (!hcd->msi_enabled) { - u32 irq_pending; - irq_pending = readl(&ir->ir_set->irq_pending); - irq_pending |= IMAN_IP; - writel(irq_pending, &ir->ir_set->irq_pending); - } - - if (xhci->xhc_state & XHCI_STATE_DYING || - xhci->xhc_state & XHCI_STATE_HALTED) { - xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " - "Shouldn't IRQs be disabled?\n"); - /* Clear the event handler busy flag (RW1C); - * the event ring should be empty. - */ - temp_64 = xhci_read_64(xhci, &ir->ir_set->erst_dequeue); - xhci_write_64(xhci, temp_64 | ERST_EHB, - &ir->ir_set->erst_dequeue); - ret = IRQ_HANDLED; - goto out; - } - - event_ring_deq = ir->event_ring->dequeue; - /* FIXME this should be a delayed service routine - * that clears the EHB. - */ - while (xhci_handle_event(xhci, ir) > 0) { - if (event_loop++ < TRBS_PER_SEGMENT / 2) - continue; - xhci_update_erst_dequeue(xhci, ir, event_ring_deq, false); - event_ring_deq = ir->event_ring->dequeue; - - /* ring is half-full, force isoc trbs to interrupt more often */ - if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN) - xhci->isoc_bei_interval = xhci->isoc_bei_interval / 2; - - event_loop = 0; - } - - xhci_update_erst_dequeue(xhci, ir, event_ring_deq, true); ret = IRQ_HANDLED; + /* This is the handler of the primary interrupter */ + xhci_handle_events(xhci, xhci->interrupters[0]); out: spin_unlock(&xhci->lock); @@ -4019,7 +4031,8 @@ static int xhci_get_isoc_frame_id(struct xhci_hcd *xhci, } /* Check if we should generate event interrupt for a TD in an isoc URB */ -static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i) +static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i, + struct xhci_interrupter *ir) { if (xhci->hci_version < 0x100) return false; @@ -4030,8 +4043,8 @@ static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i) * If AVOID_BEI is set the host handles full event rings poorly, * generate an event at least every 8th TD to clear the event ring */ - if (i && xhci->quirks & XHCI_AVOID_BEI) - return !!(i % xhci->isoc_bei_interval); + if (i && ir->isoc_bei_interval && xhci->quirks & XHCI_AVOID_BEI) + return !!(i % ir->isoc_bei_interval); return true; } @@ -4040,6 +4053,7 @@ static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i) static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index) { + struct xhci_interrupter *ir; struct xhci_ring *ep_ring; struct urb_priv *urb_priv; struct xhci_td *td; @@ -4057,6 +4071,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, xep = &xhci->devs[slot_id]->eps[ep_index]; ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; + ir = xhci->interrupters[0]; num_tds = urb->number_of_packets; if (num_tds < 1) { @@ -4144,7 +4159,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, td->last_trb = ep_ring->enqueue; td->last_trb_seg = ep_ring->enq_seg; field |= TRB_IOC; - if (trb_block_event_intr(xhci, num_tds, i)) + if (trb_block_event_intr(xhci, num_tds, i, ir)) field |= TRB_BEI; } /* Calculate TRB length */ diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index ac47b1c0544a6..1740000d54c29 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -172,8 +172,8 @@ DECLARE_EVENT_CLASS(xhci_log_free_virt_dev, __field(void *, vdev) __field(unsigned long long, out_ctx) __field(unsigned long long, in_ctx) - __field(u8, fake_port) - __field(u8, real_port) + __field(int, hcd_portnum) + __field(int, hw_portnum) __field(u16, current_mel) ), @@ -181,13 +181,13 @@ DECLARE_EVENT_CLASS(xhci_log_free_virt_dev, __entry->vdev = vdev; __entry->in_ctx = (unsigned long long) vdev->in_ctx->dma; __entry->out_ctx = (unsigned long long) vdev->out_ctx->dma; - __entry->fake_port = (u8) vdev->fake_port; - __entry->real_port = (u8) vdev->real_port; + __entry->hcd_portnum = (int) vdev->rhub_port->hcd_portnum; + __entry->hw_portnum = (int) vdev->rhub_port->hw_portnum; __entry->current_mel = (u16) vdev->current_mel; ), - TP_printk("vdev %p ctx %llx | %llx fake_port %d real_port %d current_mel %d", + TP_printk("vdev %p ctx %llx | %llx hcd_portnum %d hw_portnum %d current_mel %d", __entry->vdev, __entry->in_ctx, __entry->out_ctx, - __entry->fake_port, __entry->real_port, __entry->current_mel + __entry->hcd_portnum, __entry->hw_portnum, __entry->current_mel ) ); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index c057c42c36f4c..8579603edaff1 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -346,6 +346,23 @@ static int xhci_disable_interrupter(struct xhci_interrupter *ir) return 0; } +/* interrupt moderation interval imod_interval in nanoseconds */ +static int xhci_set_interrupter_moderation(struct xhci_interrupter *ir, + u32 imod_interval) +{ + u32 imod; + + if (!ir || !ir->ir_set || imod_interval > U16_MAX * 250) + return -EINVAL; + + imod = readl(&ir->ir_set->irq_control); + imod &= ~ER_IRQ_INTERVAL_MASK; + imod |= (imod_interval / 250) & ER_IRQ_INTERVAL_MASK; + writel(imod, &ir->ir_set->irq_control); + + return 0; +} + static void compliance_mode_recovery(struct timer_list *t) { struct xhci_hcd *xhci; @@ -528,7 +545,6 @@ static int xhci_run_finished(struct xhci_hcd *xhci) */ int xhci_run(struct usb_hcd *hcd) { - u32 temp; u64 temp_64; int ret; struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -538,6 +554,9 @@ int xhci_run(struct usb_hcd *hcd) */ hcd->uses_new_polling = 1; + if (hcd->msi_enabled) + ir->ip_autoclear = true; + if (!usb_hcd_is_primary_hcd(hcd)) return xhci_run_finished(xhci); @@ -548,12 +567,7 @@ int xhci_run(struct usb_hcd *hcd) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "ERST deq = 64'h%0lx", (long unsigned int) temp_64); - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "// Set the interrupt modulation register"); - temp = readl(&ir->ir_set->irq_control); - temp &= ~ER_IRQ_INTERVAL_MASK; - temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK; - writel(temp, &ir->ir_set->irq_control); + xhci_set_interrupter_moderation(ir, xhci->imod_interval); if (xhci->quirks & XHCI_NEC_HOST) { struct xhci_command *command; @@ -780,19 +794,7 @@ static void xhci_clear_command_ring(struct xhci_hcd *xhci) seg = seg->next; } while (seg != ring->deq_seg); - /* Reset the software enqueue and dequeue pointers */ - ring->deq_seg = ring->first_seg; - ring->dequeue = ring->first_seg->trbs; - ring->enq_seg = ring->deq_seg; - ring->enqueue = ring->dequeue; - - ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1; - /* - * Ring is now zeroed, so the HW should look for change of ownership - * when the cycle bit is set to 1. - */ - ring->cycle_state = 1; - + xhci_initialize_ring_info(ring, 1); /* * Reset the hardware dequeue pointer. * Yes, this will need to be re-written after resume, but we're paranoid @@ -1217,6 +1219,8 @@ static int xhci_map_temp_buffer(struct usb_hcd *hcd, struct urb *urb) temp = kzalloc_node(buf_len, GFP_ATOMIC, dev_to_node(hcd->self.sysdev)); + if (!temp) + return -ENOMEM; if (usb_urb_dir_out(urb)) sg_pcopy_to_buffer(urb->sg, urb->num_sgs, @@ -2259,7 +2263,7 @@ static int xhci_check_tt_bw_table(struct xhci_hcd *xhci, struct xhci_tt_bw_info *tt_info; /* Find the bandwidth table for the root port this TT is attached to. */ - bw_table = &xhci->rh_bw[virt_dev->real_port - 1].bw_table; + bw_table = &xhci->rh_bw[virt_dev->rhub_port->hw_portnum].bw_table; tt_info = virt_dev->tt_info; /* If this TT already had active endpoints, the bandwidth for this TT * has already been added. Removing all periodic endpoints (and thus @@ -2377,7 +2381,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci, if (virt_dev->tt_info) { xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "Recalculating BW for rootport %u", - virt_dev->real_port); + virt_dev->rhub_port->hw_portnum + 1); if (xhci_check_tt_bw_table(xhci, virt_dev, old_active_eps)) { xhci_warn(xhci, "Not enough bandwidth on HS bus for " "newly activated TT.\n"); @@ -2390,7 +2394,7 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci, } else { xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "Recalculating BW for rootport %u", - virt_dev->real_port); + virt_dev->rhub_port->hw_portnum + 1); } /* Add in how much bandwidth will be used for interval zero, or the @@ -2487,14 +2491,12 @@ static int xhci_check_bw_table(struct xhci_hcd *xhci, bw_used += overhead + packet_size; if (!virt_dev->tt_info && virt_dev->udev->speed == USB_SPEED_HIGH) { - unsigned int port_index = virt_dev->real_port - 1; - /* OK, we're manipulating a HS device attached to a * root port bandwidth domain. Include the number of active TTs * in the bandwidth used. */ bw_used += TT_HS_OVERHEAD * - xhci->rh_bw[port_index].num_active_tts; + xhci->rh_bw[virt_dev->rhub_port->hw_portnum].num_active_tts; } xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, @@ -2681,7 +2683,7 @@ void xhci_update_tt_active_eps(struct xhci_hcd *xhci, if (!virt_dev->tt_info) return; - rh_bw_info = &xhci->rh_bw[virt_dev->real_port - 1]; + rh_bw_info = &xhci->rh_bw[virt_dev->rhub_port->hw_portnum]; if (old_active_eps == 0 && virt_dev->tt_info->active_eps != 0) { rh_bw_info->num_active_tts += 1; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 6f82d404883f9..6f4bf98a62824 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -22,6 +22,9 @@ #include "xhci-ext-caps.h" #include "pci-quirks.h" +#include "xhci-port.h" +#include "xhci-caps.h" + /* max buffer size for trace and debug messages */ #define XHCI_MSG_MAX 500 @@ -62,90 +65,6 @@ struct xhci_cap_regs { /* Reserved up to (CAPLENGTH - 0x1C) */ }; -/* hc_capbase bitmasks */ -/* bits 7:0 - how long is the Capabilities register */ -#define HC_LENGTH(p) XHCI_HC_LENGTH(p) -/* bits 31:16 */ -#define HC_VERSION(p) (((p) >> 16) & 0xffff) - -/* HCSPARAMS1 - hcs_params1 - bitmasks */ -/* bits 0:7, Max Device Slots */ -#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff) -#define HCS_SLOTS_MASK 0xff -/* bits 8:18, Max Interrupters */ -#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff) -/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */ -#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f) - -/* HCSPARAMS2 - hcs_params2 - bitmasks */ -/* bits 0:3, frames or uframes that SW needs to queue transactions - * ahead of the HW to meet periodic deadlines */ -#define HCS_IST(p) (((p) >> 0) & 0xf) -/* bits 4:7, max number of Event Ring segments */ -#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf) -/* bits 21:25 Hi 5 bits of Scratchpad buffers SW must allocate for the HW */ -/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */ -/* bits 27:31 Lo 5 bits of Scratchpad buffers SW must allocate for the HW */ -#define HCS_MAX_SCRATCHPAD(p) ((((p) >> 16) & 0x3e0) | (((p) >> 27) & 0x1f)) - -/* HCSPARAMS3 - hcs_params3 - bitmasks */ -/* bits 0:7, Max U1 to U0 latency for the roothub ports */ -#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff) -/* bits 16:31, Max U2 to U0 latency for the roothub ports */ -#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff) - -/* HCCPARAMS - hcc_params - bitmasks */ -/* true: HC can use 64-bit address pointers */ -#define HCC_64BIT_ADDR(p) ((p) & (1 << 0)) -/* true: HC can do bandwidth negotiation */ -#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1)) -/* true: HC uses 64-byte Device Context structures - * FIXME 64-byte context structures aren't supported yet. - */ -#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2)) -/* true: HC has port power switches */ -#define HCC_PPC(p) ((p) & (1 << 3)) -/* true: HC has port indicators */ -#define HCS_INDICATOR(p) ((p) & (1 << 4)) -/* true: HC has Light HC Reset Capability */ -#define HCC_LIGHT_RESET(p) ((p) & (1 << 5)) -/* true: HC supports latency tolerance messaging */ -#define HCC_LTC(p) ((p) & (1 << 6)) -/* true: no secondary Stream ID Support */ -#define HCC_NSS(p) ((p) & (1 << 7)) -/* true: HC supports Stopped - Short Packet */ -#define HCC_SPC(p) ((p) & (1 << 9)) -/* true: HC has Contiguous Frame ID Capability */ -#define HCC_CFC(p) ((p) & (1 << 11)) -/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */ -#define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1)) -/* Extended Capabilities pointer from PCI base - section 5.3.6 */ -#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p) - -#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32) - -/* db_off bitmask - bits 0:1 reserved */ -#define DBOFF_MASK (~0x3) - -/* run_regs_off bitmask - bits 0:4 reserved */ -#define RTSOFF_MASK (~0x1f) - -/* HCCPARAMS2 - hcc_params2 - bitmasks */ -/* true: HC supports U3 entry Capability */ -#define HCC2_U3C(p) ((p) & (1 << 0)) -/* true: HC supports Configure endpoint command Max exit latency too large */ -#define HCC2_CMC(p) ((p) & (1 << 1)) -/* true: HC supports Force Save context Capability */ -#define HCC2_FSC(p) ((p) & (1 << 2)) -/* true: HC supports Compliance Transition Capability */ -#define HCC2_CTC(p) ((p) & (1 << 3)) -/* true: HC support Large ESIT payload Capability > 48k */ -#define HCC2_LEC(p) ((p) & (1 << 4)) -/* true: HC support Configuration Information Capability */ -#define HCC2_CIC(p) ((p) & (1 << 5)) -/* true: HC support Extended TBC Capability, Isoc burst count > 65535 */ -#define HCC2_ETC(p) ((p) & (1 << 6)) - /* Number of registers per port */ #define NUM_PORT_REGS 4 @@ -291,181 +210,6 @@ struct xhci_op_regs { #define CONFIG_CIE (1 << 9) /* bits 10:31 - reserved and should be preserved */ -/* PORTSC - Port Status and Control Register - port_status_base bitmasks */ -/* true: device connected */ -#define PORT_CONNECT (1 << 0) -/* true: port enabled */ -#define PORT_PE (1 << 1) -/* bit 2 reserved and zeroed */ -/* true: port has an over-current condition */ -#define PORT_OC (1 << 3) -/* true: port reset signaling asserted */ -#define PORT_RESET (1 << 4) -/* Port Link State - bits 5:8 - * A read gives the current link PM state of the port, - * a write with Link State Write Strobe set sets the link state. - */ -#define PORT_PLS_MASK (0xf << 5) -#define XDEV_U0 (0x0 << 5) -#define XDEV_U1 (0x1 << 5) -#define XDEV_U2 (0x2 << 5) -#define XDEV_U3 (0x3 << 5) -#define XDEV_DISABLED (0x4 << 5) -#define XDEV_RXDETECT (0x5 << 5) -#define XDEV_INACTIVE (0x6 << 5) -#define XDEV_POLLING (0x7 << 5) -#define XDEV_RECOVERY (0x8 << 5) -#define XDEV_HOT_RESET (0x9 << 5) -#define XDEV_COMP_MODE (0xa << 5) -#define XDEV_TEST_MODE (0xb << 5) -#define XDEV_RESUME (0xf << 5) - -/* true: port has power (see HCC_PPC) */ -#define PORT_POWER (1 << 9) -/* bits 10:13 indicate device speed: - * 0 - undefined speed - port hasn't be initialized by a reset yet - * 1 - full speed - * 2 - low speed - * 3 - high speed - * 4 - super speed - * 5-15 reserved - */ -#define DEV_SPEED_MASK (0xf << 10) -#define XDEV_FS (0x1 << 10) -#define XDEV_LS (0x2 << 10) -#define XDEV_HS (0x3 << 10) -#define XDEV_SS (0x4 << 10) -#define XDEV_SSP (0x5 << 10) -#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10)) -#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS) -#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS) -#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS) -#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS) -#define DEV_SUPERSPEEDPLUS(p) (((p) & DEV_SPEED_MASK) == XDEV_SSP) -#define DEV_SUPERSPEED_ANY(p) (((p) & DEV_SPEED_MASK) >= XDEV_SS) -#define DEV_PORT_SPEED(p) (((p) >> 10) & 0x0f) - -/* Bits 20:23 in the Slot Context are the speed for the device */ -#define SLOT_SPEED_FS (XDEV_FS << 10) -#define SLOT_SPEED_LS (XDEV_LS << 10) -#define SLOT_SPEED_HS (XDEV_HS << 10) -#define SLOT_SPEED_SS (XDEV_SS << 10) -#define SLOT_SPEED_SSP (XDEV_SSP << 10) -/* Port Indicator Control */ -#define PORT_LED_OFF (0 << 14) -#define PORT_LED_AMBER (1 << 14) -#define PORT_LED_GREEN (2 << 14) -#define PORT_LED_MASK (3 << 14) -/* Port Link State Write Strobe - set this when changing link state */ -#define PORT_LINK_STROBE (1 << 16) -/* true: connect status change */ -#define PORT_CSC (1 << 17) -/* true: port enable change */ -#define PORT_PEC (1 << 18) -/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port - * into an enabled state, and the device into the default state. A "warm" reset - * also resets the link, forcing the device through the link training sequence. - * SW can also look at the Port Reset register to see when warm reset is done. - */ -#define PORT_WRC (1 << 19) -/* true: over-current change */ -#define PORT_OCC (1 << 20) -/* true: reset change - 1 to 0 transition of PORT_RESET */ -#define PORT_RC (1 << 21) -/* port link status change - set on some port link state transitions: - * Transition Reason - * ------------------------------------------------------------------------------ - * - U3 to Resume Wakeup signaling from a device - * - Resume to Recovery to U0 USB 3.0 device resume - * - Resume to U0 USB 2.0 device resume - * - U3 to Recovery to U0 Software resume of USB 3.0 device complete - * - U3 to U0 Software resume of USB 2.0 device complete - * - U2 to U0 L1 resume of USB 2.1 device complete - * - U0 to U0 (???) L1 entry rejection by USB 2.1 device - * - U0 to disabled L1 entry error with USB 2.1 device - * - Any state to inactive Error on USB 3.0 port - */ -#define PORT_PLC (1 << 22) -/* port configure error change - port failed to configure its link partner */ -#define PORT_CEC (1 << 23) -#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ - PORT_RC | PORT_PLC | PORT_CEC) - - -/* Cold Attach Status - xHC can set this bit to report device attached during - * Sx state. Warm port reset should be perfomed to clear this bit and move port - * to connected state. - */ -#define PORT_CAS (1 << 24) -/* wake on connect (enable) */ -#define PORT_WKCONN_E (1 << 25) -/* wake on disconnect (enable) */ -#define PORT_WKDISC_E (1 << 26) -/* wake on over-current (enable) */ -#define PORT_WKOC_E (1 << 27) -/* bits 28:29 reserved */ -/* true: device is non-removable - for USB 3.0 roothub emulation */ -#define PORT_DEV_REMOVE (1 << 30) -/* Initiate a warm port reset - complete when PORT_WRC is '1' */ -#define PORT_WR (1 << 31) - -/* We mark duplicate entries with -1 */ -#define DUPLICATE_ENTRY ((u8)(-1)) - -/* Port Power Management Status and Control - port_power_base bitmasks */ -/* Inactivity timer value for transitions into U1, in microseconds. - * Timeout can be up to 127us. 0xFF means an infinite timeout. - */ -#define PORT_U1_TIMEOUT(p) ((p) & 0xff) -#define PORT_U1_TIMEOUT_MASK 0xff -/* Inactivity timer value for transitions into U2 */ -#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8) -#define PORT_U2_TIMEOUT_MASK (0xff << 8) -/* Bits 24:31 for port testing */ - -/* USB2 Protocol PORTSPMSC */ -#define PORT_L1S_MASK 7 -#define PORT_L1S_SUCCESS 1 -#define PORT_RWE (1 << 3) -#define PORT_HIRD(p) (((p) & 0xf) << 4) -#define PORT_HIRD_MASK (0xf << 4) -#define PORT_L1DS_MASK (0xff << 8) -#define PORT_L1DS(p) (((p) & 0xff) << 8) -#define PORT_HLE (1 << 16) -#define PORT_TEST_MODE_SHIFT 28 - -/* USB3 Protocol PORTLI Port Link Information */ -#define PORT_RX_LANES(p) (((p) >> 16) & 0xf) -#define PORT_TX_LANES(p) (((p) >> 20) & 0xf) - -/* USB2 Protocol PORTHLPMC */ -#define PORT_HIRDM(p)((p) & 3) -#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2) -#define PORT_BESLD(p)(((p) & 0xf) << 10) - -/* use 512 microseconds as USB2 LPM L1 default timeout. */ -#define XHCI_L1_TIMEOUT 512 - -/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency. - * Safe to use with mixed HIRD and BESL systems (host and device) and is used - * by other operating systems. - * - * XHCI 1.0 errata 8/14/12 Table 13 notes: - * "Software should choose xHC BESL/BESLD field values that do not violate a - * device's resume latency requirements, - * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached, - * or not program values < '4' if BLC = '0' and a BESL device is attached. - */ -#define XHCI_DEFAULT_BESL 4 - -/* - * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports - * to complete link training. usually link trainig completes much faster - * so check status 10 times with 36ms sleep in places we need to wait for - * polling to complete. - */ -#define XHCI_PORT_POLLING_LFPS_TIME 36 - /** * struct xhci_intr_reg - Interrupt Register Set * @irq_pending: IMAN - Interrupt Management Register. Used to enable @@ -995,8 +739,7 @@ struct xhci_virt_device { /* Used for addressing devices and configuration changes */ struct xhci_container_ctx *in_ctx; struct xhci_virt_ep eps[EP_CTX_PER_DEV]; - u8 fake_port; - u8 real_port; + struct xhci_port *rhub_port; struct xhci_interval_bw_table *bw_table; struct xhci_tt_bw_info *tt_info; /* @@ -1688,6 +1431,8 @@ struct xhci_interrupter { struct xhci_erst erst; struct xhci_intr_reg __iomem *ir_set; unsigned int intr_num; + bool ip_autoclear; + u32 isoc_bei_interval; /* For interrupter registers save and restore over suspend/resume */ u32 s3_irq_pending; u32 s3_irq_control; @@ -1717,6 +1462,8 @@ struct xhci_port { unsigned int lpm_incapable:1; unsigned long resume_timestamp; bool rexit_active; + /* Slot ID is the index of the device directly connected to the port */ + int slot_id; struct completion rexit_done; struct completion u3exit_done; }; @@ -1760,7 +1507,6 @@ struct xhci_hcd { u8 isoc_threshold; /* imod_interval in ns (I * 250ns) */ u32 imod_interval; - u32 isoc_bei_interval; int event_ring_max; /* 4KB min, 128MB max */ int page_size; @@ -2200,8 +1946,6 @@ unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd); #endif /* CONFIG_PM */ u32 xhci_port_state_to_neutral(u32 state); -int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, - u16 port); void xhci_ring_device(struct xhci_hcd *xhci, int slot_id); /* xHCI contexts */ diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index 67f098579fb45..7b7e1554ea20e 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -631,7 +631,6 @@ static int mdc800_device_open (struct inode* inode, struct file *file) mdc800->camera_busy=0; mdc800->camera_request_ready=0; - retval=0; mdc800->irq_urb->dev = mdc800->dev; retval = usb_submit_urb (mdc800->irq_urb, GFP_KERNEL); if (retval) { diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c index 0dd2b032c90b9..c6101ed2d9d49 100644 --- a/drivers/usb/misc/onboard_usb_hub.c +++ b/drivers/usb/misc/onboard_usb_hub.c @@ -260,7 +260,7 @@ static int onboard_hub_probe(struct platform_device *pdev) if (!hub) return -ENOMEM; - hub->pdata = device_get_match_data(&pdev->dev); + hub->pdata = device_get_match_data(dev); if (!hub->pdata) return -EINVAL; @@ -454,6 +454,8 @@ static const struct usb_device_id onboard_hub_id_table[] = { { USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */ { USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */ + { USB_DEVICE(VENDOR_ID_TI, 0x8025) }, /* TI USB8020B 3.0 */ + { USB_DEVICE(VENDOR_ID_TI, 0x8027) }, /* TI USB8020B 2.0 */ { USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */ { USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */ { USB_DEVICE(VENDOR_ID_VIA, 0x0817) }, /* VIA VL817 3.1 */ diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h index f360d5cf8d8a0..b4b15d45f84d6 100644 --- a/drivers/usb/misc/onboard_usb_hub.h +++ b/drivers/usb/misc/onboard_usb_hub.h @@ -26,6 +26,11 @@ static const struct onboard_hub_pdata realtek_rts5411_data = { .num_supplies = 1, }; +static const struct onboard_hub_pdata ti_tusb8020b_data = { + .reset_us = 3000, + .num_supplies = 1, +}; + static const struct onboard_hub_pdata ti_tusb8041_data = { .reset_us = 3000, .num_supplies = 1, @@ -62,6 +67,8 @@ static const struct of_device_id onboard_hub_match[] = { { .compatible = "usb424,2517", .data = µchip_usb424_data, }, { .compatible = "usb424,2744", .data = µchip_usb5744_data, }, { .compatible = "usb424,5744", .data = µchip_usb5744_data, }, + { .compatible = "usb451,8025", .data = &ti_tusb8020b_data, }, + { .compatible = "usb451,8027", .data = &ti_tusb8020b_data, }, { .compatible = "usb451,8140", .data = &ti_tusb8041_data, }, { .compatible = "usb451,8142", .data = &ti_tusb8041_data, }, { .compatible = "usb4b4,6504", .data = &cypress_hx3_data, }, diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c index 9f2be22af8440..7c657ea2dabd1 100644 --- a/drivers/usb/mtu3/mtu3_host.c +++ b/drivers/usb/mtu3/mtu3_host.c @@ -34,6 +34,18 @@ #define WC0_SSUSB0_CDEN BIT(6) #define WC0_IS_SPM_EN BIT(1) +/* mt8195 */ +#define PERI_WK_CTRL0_8195 0x04 +#define WC0_IS_P_95 BIT(30) /* polarity */ +#define WC0_IS_C_95(x) ((u32)(((x) & 0x7) << 27)) +#define WC0_IS_EN_P3_95 BIT(26) +#define WC0_IS_EN_P2_95 BIT(25) + +#define PERI_WK_CTRL1_8195 0x20 +#define WC1_IS_C_95(x) ((u32)(((x) & 0xf) << 28)) +#define WC1_IS_P_95 BIT(12) +#define WC1_IS_EN_P0_95 BIT(6) + /* mt2712 etc */ #define PERI_SSUSB_SPM_CTRL 0x0 #define SSC_IP_SLEEP_EN BIT(4) @@ -44,6 +56,9 @@ enum ssusb_uwk_vers { SSUSB_UWK_V2, SSUSB_UWK_V1_1 = 101, /* specific revision 1.01 */ SSUSB_UWK_V1_2, /* specific revision 1.02 */ + SSUSB_UWK_V1_3, /* mt8195 IP0 */ + SSUSB_UWK_V1_5 = 105, /* mt8195 IP2 */ + SSUSB_UWK_V1_6, /* mt8195 IP3 */ }; /* @@ -70,6 +85,21 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable) msk = WC0_SSUSB0_CDEN | WC0_IS_SPM_EN; val = enable ? msk : 0; break; + case SSUSB_UWK_V1_3: + reg = ssusb->uwk_reg_base + PERI_WK_CTRL1_8195; + msk = WC1_IS_EN_P0_95 | WC1_IS_C_95(0xf) | WC1_IS_P_95; + val = enable ? (WC1_IS_EN_P0_95 | WC1_IS_C_95(0x1)) : 0; + break; + case SSUSB_UWK_V1_5: + reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8195; + msk = WC0_IS_EN_P2_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95; + val = enable ? (WC0_IS_EN_P2_95 | WC0_IS_C_95(0x1)) : 0; + break; + case SSUSB_UWK_V1_6: + reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8195; + msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95; + val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) : 0; + break; case SSUSB_UWK_V2: reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL; msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 051c6da7cf6d7..55df0ee413d8e 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1744,7 +1744,6 @@ static inline void musb_g_init_endpoints(struct musb *musb) { u8 epnum; struct musb_hw_ep *hw_ep; - unsigned count = 0; /* initialize endpoint list just once */ INIT_LIST_HEAD(&(musb->g.ep_list)); @@ -1754,17 +1753,14 @@ static inline void musb_g_init_endpoints(struct musb *musb) epnum++, hw_ep++) { if (hw_ep->is_shared_fifo /* || !epnum */) { init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 0); - count++; } else { if (hw_ep->max_packet_sz_tx) { init_peripheral_ep(musb, &hw_ep->ep_in, epnum, 1); - count++; } if (hw_ep->max_packet_sz_rx) { init_peripheral_ep(musb, &hw_ep->ep_out, epnum, 0); - count++; } } } diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c index 9ab50f26db607..8f735a86cd197 100644 --- a/drivers/usb/phy/phy-generic.c +++ b/drivers/usb/phy/phy-generic.c @@ -74,33 +74,26 @@ static void nop_reset(struct usb_phy_generic *nop) } /* interface to regulator framework */ -static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA) +static int nop_set_vbus(struct usb_otg *otg, bool enable) { - struct regulator *vbus_draw = nop->vbus_draw; - int enabled; - int ret; + int ret = 0; + struct usb_phy_generic *nop = dev_get_drvdata(otg->usb_phy->dev); - if (!vbus_draw) - return; + if (!nop->vbus_draw) + return 0; - enabled = nop->vbus_draw_enabled; - if (mA) { - regulator_set_current_limit(vbus_draw, 0, 1000 * mA); - if (!enabled) { - ret = regulator_enable(vbus_draw); - if (ret < 0) - return; - nop->vbus_draw_enabled = 1; - } - } else { - if (enabled) { - ret = regulator_disable(vbus_draw); - if (ret < 0) - return; - nop->vbus_draw_enabled = 0; - } + if (enable && !nop->vbus_draw_enabled) { + ret = regulator_enable(nop->vbus_draw); + if (ret) + nop->vbus_draw_enabled = false; + else + nop->vbus_draw_enabled = true; + + } else if (!enable && nop->vbus_draw_enabled) { + ret = regulator_disable(nop->vbus_draw); + nop->vbus_draw_enabled = false; } - nop->mA = mA; + return ret; } @@ -120,14 +113,9 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) otg->state = OTG_STATE_B_PERIPHERAL; nop->phy.last_event = status; - /* drawing a "unit load" is *always* OK, except for OTG */ - nop_set_vbus_draw(nop, 100); - atomic_notifier_call_chain(&nop->phy.notifier, status, otg->gadget); } else { - nop_set_vbus_draw(nop, 0); - status = USB_EVENT_NONE; otg->state = OTG_STATE_B_IDLE; nop->phy.last_event = status; @@ -274,6 +262,13 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop) return dev_err_probe(dev, PTR_ERR(nop->vbus_draw), "could not get vbus regulator\n"); + nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus"); + if (PTR_ERR(nop->vbus_draw) == -ENODEV) + nop->vbus_draw = NULL; + if (IS_ERR(nop->vbus_draw)) + return dev_err_probe(dev, PTR_ERR(nop->vbus_draw), + "could not get vbus regulator\n"); + nop->dev = dev; nop->phy.dev = nop->dev; nop->phy.label = "nop-xceiv"; @@ -284,6 +279,7 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop) nop->phy.otg->usb_phy = &nop->phy; nop->phy.otg->set_host = nop_set_host; nop->phy.otg->set_peripheral = nop_set_peripheral; + nop->phy.otg->set_vbus = nop_set_vbus; return 0; } @@ -341,6 +337,9 @@ static void usb_phy_generic_remove(struct platform_device *pdev) struct usb_phy_generic *nop = platform_get_drvdata(pdev); usb_remove_phy(&nop->phy); + + if (nop->vbus_draw && nop->vbus_draw_enabled) + regulator_disable(nop->vbus_draw); } static const struct of_device_id nop_xceiv_dt_ids[] = { diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index 4b468bde19cfb..06e0fb23566ce 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -699,7 +699,7 @@ out: } EXPORT_SYMBOL_GPL(usb_add_phy); -static struct device_type usb_phy_dev_type = { +static const struct device_type usb_phy_dev_type = { .name = "usb_phy", .uevent = usb_phy_uevent, }; diff --git a/drivers/usb/roles/class.c b/drivers/usb/roles/class.c index 70165dd86b5de..d7aa913ceb8a0 100644 --- a/drivers/usb/roles/class.c +++ b/drivers/usb/roles/class.c @@ -7,6 +7,7 @@ * Hans de Goede <hdegoede@redhat.com> */ +#include <linux/component.h> #include <linux/usb/role.h> #include <linux/property.h> #include <linux/device.h> @@ -36,6 +37,32 @@ struct usb_role_switch { #define to_role_switch(d) container_of(d, struct usb_role_switch, dev) +static int connector_bind(struct device *dev, struct device *connector, void *data) +{ + int ret; + + ret = sysfs_create_link(&dev->kobj, &connector->kobj, "connector"); + if (ret) + return ret; + + ret = sysfs_create_link(&connector->kobj, &dev->kobj, "usb-role-switch"); + if (ret) + sysfs_remove_link(&dev->kobj, "connector"); + + return ret; +} + +static void connector_unbind(struct device *dev, struct device *connector, void *data) +{ + sysfs_remove_link(&connector->kobj, "usb-role-switch"); + sysfs_remove_link(&dev->kobj, "connector"); +} + +static const struct component_ops connector_ops = { + .bind = connector_bind, + .unbind = connector_unbind, +}; + /** * usb_role_switch_set_role - Set USB role for a switch * @sw: USB role switch @@ -361,6 +388,12 @@ usb_role_switch_register(struct device *parent, return ERR_PTR(ret); } + if (dev_fwnode(&sw->dev)) { + ret = component_add(&sw->dev, &connector_ops); + if (ret) + dev_warn(&sw->dev, "failed to add component\n"); + } + sw->registered = true; /* TODO: Symlinks for the host port and the device controller. */ @@ -377,10 +410,12 @@ EXPORT_SYMBOL_GPL(usb_role_switch_register); */ void usb_role_switch_unregister(struct usb_role_switch *sw) { - if (!IS_ERR_OR_NULL(sw)) { - sw->registered = false; - device_unregister(&sw->dev); - } + if (IS_ERR_OR_NULL(sw)) + return; + sw->registered = false; + if (dev_fwnode(&sw->dev)) + component_del(&sw->dev, &connector_ops); + device_unregister(&sw->dev); } EXPORT_SYMBOL_GPL(usb_role_switch_unregister); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 923e0ed85444b..21fd26609252b 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -56,6 +56,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ + { USB_DEVICE(0x04BF, 0x1301) }, /* TDK Corporation NC0110013M - Network Controller */ + { USB_DEVICE(0x04BF, 0x1303) }, /* TDK Corporation MM0110113M - i3 Micro Module */ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */ { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ @@ -144,6 +146,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ + { USB_DEVICE(0x10C4, 0x863C) }, /* MGP Instruments PDS100 */ { USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */ { USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */ { USB_DEVICE(0x10C4, 0x87ED) }, /* IMST USB-Stick for Smart Meter */ @@ -177,6 +180,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */ { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ + { USB_DEVICE(0x11CA, 0x0212) }, /* Verifone USB to Printer (UART, CP2102) */ { USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */ { USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 13a56783830df..76a04ab411006 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1077,6 +1077,8 @@ static const struct usb_device_id id_table_combined[] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + /* GMC devices */ + { USB_DEVICE(GMC_VID, GMC_Z216C_PID) }, { } /* Terminating entry */ }; @@ -2610,7 +2612,7 @@ static void ftdi_set_termios(struct tty_struct *tty, struct device *ddev = &port->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); struct ktermios *termios = &tty->termios; - unsigned int cflag = termios->c_cflag; + unsigned int cflag; u16 value, index; int ret; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 21a2b5a25fc09..5ee60ba2a73cd 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1606,3 +1606,9 @@ #define UBLOX_VID 0x1546 #define UBLOX_C099F9P_ZED_PID 0x0502 #define UBLOX_C099F9P_ODIN_PID 0x0503 + +/* + * GMC devices + */ +#define GMC_VID 0x1cd7 +#define GMC_Z216C_PID 0x0217 /* GMC Z216C Adapter IR-USB */ diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 93b17e0e05a33..0a783985197c3 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -921,7 +921,6 @@ static void usa28_indat_callback(struct urb *urb) port = urb->context; p_priv = usb_get_serial_port_data(port); - data = urb->transfer_buffer; if (urb != p_priv->in_urbs[p_priv->in_flip]) return; diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2ae124c49d448..55a65d941ccbf 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -613,6 +613,11 @@ static void option_instat_callback(struct urb *urb); /* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */ #define LUAT_PRODUCT_AIR720U 0x4e00 +/* MeiG Smart Technology products */ +#define MEIGSMART_VENDOR_ID 0x2dee +/* MeiG Smart SLM320 based on UNISOC UIS8910 */ +#define MEIGSMART_PRODUCT_SLM320 0x4d41 + /* Device flags */ /* Highest interface number which can be used with NCTRL() and RSVD() */ @@ -2282,6 +2287,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c index 6365cfe5402cb..fa07f6ff9ecc8 100644 --- a/drivers/usb/serial/oti6858.c +++ b/drivers/usb/serial/oti6858.c @@ -409,7 +409,6 @@ static void oti6858_set_termios(struct tty_struct *tty, cflag = tty->termios.c_cflag; spin_lock_irqsave(&priv->lock, flags); - divisor = priv->pending_setup.divisor; frame_fmt = priv->pending_setup.frame_fmt; control = priv->pending_setup.control; spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 2b098b55c4cbb..c3ce51c2dabde 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -534,7 +534,6 @@ static void pdump(struct us_data *us, void *ibuffer, int length) } line[offset] = 0; usb_stor_dbg(us, "%s\n", line); - offset = 0; } #endif diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index 15dc25801cdcc..0aa079405d23c 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -196,7 +196,7 @@ static int sddr55_read_data(struct us_data *us, unsigned char *buffer; unsigned int pba; - unsigned long address; + unsigned int address; unsigned short pages; unsigned int len, offset; @@ -316,7 +316,7 @@ static int sddr55_write_data(struct us_data *us, unsigned int pba; unsigned int new_pba; - unsigned long address; + unsigned int address; unsigned short pages; int i; diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index f8ea3054be542..038dc51f429dd 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -50,13 +50,17 @@ enum { enum dp_state { DP_STATE_IDLE, DP_STATE_ENTER, + DP_STATE_ENTER_PRIME, DP_STATE_UPDATE, DP_STATE_CONFIGURE, + DP_STATE_CONFIGURE_PRIME, DP_STATE_EXIT, + DP_STATE_EXIT_PRIME, }; struct dp_altmode { struct typec_displayport_data data; + struct typec_displayport_data data_prime; enum dp_state state; bool hpd; @@ -67,6 +71,7 @@ struct dp_altmode { struct typec_altmode *alt; const struct typec_altmode *port; struct fwnode_handle *connector_fwnode; + struct typec_altmode *plug_prime; }; static int dp_altmode_notify(struct dp_altmode *dp) @@ -99,12 +104,18 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con) conf |= DP_CONF_UFP_U_AS_DFP_D; pin_assign = DP_CAP_UFP_D_PIN_ASSIGN(dp->alt->vdo) & DP_CAP_DFP_D_PIN_ASSIGN(dp->port->vdo); + /* Account for active cable capabilities */ + if (dp->plug_prime) + pin_assign &= DP_CAP_DFP_D_PIN_ASSIGN(dp->plug_prime->vdo); break; case DP_STATUS_CON_UFP_D: case DP_STATUS_CON_BOTH: /* NOTE: First acting as DP source */ conf |= DP_CONF_UFP_U_AS_UFP_D; pin_assign = DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo) & DP_CAP_PIN_ASSIGN_DFP_D(dp->port->vdo); + /* Account for active cable capabilities */ + if (dp->plug_prime) + pin_assign &= DP_CAP_UFP_D_PIN_ASSIGN(dp->plug_prime->vdo); break; default: break; @@ -130,6 +141,8 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con) } dp->data.conf = conf; + if (dp->plug_prime) + dp->data_prime.conf = conf; return 0; } @@ -143,13 +156,16 @@ static int dp_altmode_status_update(struct dp_altmode *dp) if (configured && (dp->data.status & DP_STATUS_SWITCH_TO_USB)) { dp->data.conf = 0; - dp->state = DP_STATE_CONFIGURE; + dp->data_prime.conf = 0; + dp->state = dp->plug_prime ? DP_STATE_CONFIGURE_PRIME : + DP_STATE_CONFIGURE; } else if (dp->data.status & DP_STATUS_EXIT_DP_MODE) { dp->state = DP_STATE_EXIT; } else if (!(con & DP_CONF_CURRENTLY(dp->data.conf))) { ret = dp_altmode_configure(dp, con); if (!ret) { - dp->state = DP_STATE_CONFIGURE; + dp->state = dp->plug_prime ? DP_STATE_CONFIGURE_PRIME : + DP_STATE_CONFIGURE; if (dp->hpd != hpd) { dp->hpd = hpd; dp->pending_hpd = true; @@ -209,6 +225,19 @@ static int dp_altmode_configure_vdm(struct dp_altmode *dp, u32 conf) return ret; } +static int dp_altmode_configure_vdm_cable(struct dp_altmode *dp, u32 conf) +{ + int svdm_version = typec_altmode_get_cable_svdm_version(dp->plug_prime); + u32 header; + + if (svdm_version < 0) + return svdm_version; + + header = DP_HEADER(dp, svdm_version, DP_CMD_CONFIGURE); + + return typec_cable_altmode_vdm(dp->plug_prime, TYPEC_PLUG_SOP_P, header, &conf, 2); +} + static void dp_altmode_work(struct work_struct *work) { struct dp_altmode *dp = container_of(work, struct dp_altmode, work); @@ -225,6 +254,19 @@ static void dp_altmode_work(struct work_struct *work) if (ret && ret != -EBUSY) dev_err(&dp->alt->dev, "failed to enter mode\n"); break; + case DP_STATE_ENTER_PRIME: + ret = typec_cable_altmode_enter(dp->alt, TYPEC_PLUG_SOP_P, NULL); + /* + * If we fail to enter Alt Mode on SOP', then we should drop the + * plug from the driver and attempt to run the driver without + * it. + */ + if (ret && ret != -EBUSY) { + dev_err(&dp->alt->dev, "plug failed to enter mode\n"); + dp->state = DP_STATE_ENTER; + goto disable_prime; + } + break; case DP_STATE_UPDATE: svdm_version = typec_altmode_get_svdm_version(dp->alt); if (svdm_version < 0) @@ -243,10 +285,24 @@ static void dp_altmode_work(struct work_struct *work) dev_err(&dp->alt->dev, "unable to send Configure command (%d)\n", ret); break; + case DP_STATE_CONFIGURE_PRIME: + ret = dp_altmode_configure_vdm_cable(dp, dp->data_prime.conf); + if (ret) { + dev_err(&dp->plug_prime->dev, + "unable to send Configure command (%d)\n", + ret); + dp->state = DP_STATE_CONFIGURE; + goto disable_prime; + } + break; case DP_STATE_EXIT: if (typec_altmode_exit(dp->alt)) dev_err(&dp->alt->dev, "Exit Mode Failed!\n"); break; + case DP_STATE_EXIT_PRIME: + if (typec_cable_altmode_exit(dp->plug_prime, TYPEC_PLUG_SOP_P)) + dev_err(&dp->plug_prime->dev, "Exit Mode Failed!\n"); + break; default: break; } @@ -254,6 +310,13 @@ static void dp_altmode_work(struct work_struct *work) dp->state = DP_STATE_IDLE; mutex_unlock(&dp->lock); + return; + +disable_prime: + typec_altmode_put_plug(dp->plug_prime); + dp->plug_prime = NULL; + schedule_work(&dp->work); + mutex_unlock(&dp->lock); } static void dp_altmode_attention(struct typec_altmode *alt, const u32 vdo) @@ -314,6 +377,8 @@ static int dp_altmode_vdm(struct typec_altmode *alt, dp->hpd = false; sysfs_notify(&dp->alt->dev.kobj, "displayport", "hpd"); } + if (dp->plug_prime) + dp->state = DP_STATE_EXIT_PRIME; break; case DP_CMD_STATUS_UPDATE: dp->data.status = *vdo; @@ -348,10 +413,84 @@ err_unlock: return ret; } +static int dp_cable_altmode_vdm(struct typec_altmode *alt, enum typec_plug_index sop, + const u32 hdr, const u32 *vdo, int count) +{ + struct dp_altmode *dp = typec_altmode_get_drvdata(alt); + int cmd_type = PD_VDO_CMDT(hdr); + int cmd = PD_VDO_CMD(hdr); + int ret = 0; + + mutex_lock(&dp->lock); + + if (dp->state != DP_STATE_IDLE) { + ret = -EBUSY; + goto err_unlock; + } + + switch (cmd_type) { + case CMDT_RSP_ACK: + switch (cmd) { + case CMD_ENTER_MODE: + typec_altmode_update_active(dp->plug_prime, true); + dp->state = DP_STATE_ENTER; + break; + case CMD_EXIT_MODE: + dp->data_prime.status = 0; + dp->data_prime.conf = 0; + typec_altmode_update_active(dp->plug_prime, false); + break; + case DP_CMD_CONFIGURE: + dp->state = DP_STATE_CONFIGURE; + break; + default: + break; + } + break; + case CMDT_RSP_NAK: + switch (cmd) { + case DP_CMD_CONFIGURE: + dp->data_prime.conf = 0; + /* Attempt to configure on SOP, drop plug */ + typec_altmode_put_plug(dp->plug_prime); + dp->plug_prime = NULL; + dp->state = DP_STATE_CONFIGURE; + break; + default: + break; + } + break; + default: + break; + } + + if (dp->state != DP_STATE_IDLE) + schedule_work(&dp->work); + +err_unlock: + mutex_unlock(&dp->lock); + return ret; +} + static int dp_altmode_activate(struct typec_altmode *alt, int activate) { - return activate ? typec_altmode_enter(alt, NULL) : - typec_altmode_exit(alt); + struct dp_altmode *dp = typec_altmode_get_drvdata(alt); + int ret; + + if (activate) { + if (dp->plug_prime) { + ret = typec_cable_altmode_enter(alt, TYPEC_PLUG_SOP_P, NULL); + if (ret < 0) { + typec_altmode_put_plug(dp->plug_prime); + dp->plug_prime = NULL; + } else { + return ret; + } + } + return typec_altmode_enter(alt, NULL); + } else { + return typec_altmode_exit(alt); + } } static const struct typec_altmode_ops dp_altmode_ops = { @@ -360,6 +499,10 @@ static const struct typec_altmode_ops dp_altmode_ops = { .activate = dp_altmode_activate, }; +static const struct typec_cable_ops dp_cable_ops = { + .vdm = dp_cable_altmode_vdm, +}; + static const char * const configurations[] = { [DP_CONF_USB] = "USB", [DP_CONF_DFP_D] = "source", @@ -501,6 +644,7 @@ pin_assignment_store(struct device *dev, struct device_attribute *attr, /* Only send Configure command if a configuration has been set */ if (dp->alt->active && DP_CONF_CURRENTLY(dp->data.conf)) { + /* todo: send manual configure over SOP'*/ ret = dp_altmode_configure_vdm(dp, conf); if (ret) goto out_unlock; @@ -579,6 +723,7 @@ static const struct attribute_group *displayport_groups[] = { int dp_altmode_probe(struct typec_altmode *alt) { const struct typec_altmode *port = typec_altmode_get_partner(alt); + struct typec_altmode *plug = typec_altmode_get_plug(alt, TYPEC_PLUG_SOP_P); struct fwnode_handle *fwnode; struct dp_altmode *dp; @@ -603,6 +748,13 @@ int dp_altmode_probe(struct typec_altmode *alt) alt->desc = "DisplayPort"; alt->ops = &dp_altmode_ops; + if (plug) { + plug->desc = "Displayport"; + plug->cable_ops = &dp_cable_ops; + } + + dp->plug_prime = plug; + fwnode = dev_fwnode(alt->dev.parent->parent); /* typec_port fwnode */ if (fwnode_property_present(fwnode, "displayport")) dp->connector_fwnode = fwnode_find_reference(fwnode, "displayport", 0); @@ -612,8 +764,10 @@ int dp_altmode_probe(struct typec_altmode *alt) dp->connector_fwnode = NULL; typec_altmode_set_drvdata(alt, dp); + if (plug) + typec_altmode_set_drvdata(plug, dp); - dp->state = DP_STATE_ENTER; + dp->state = plug ? DP_STATE_ENTER_PRIME : DP_STATE_ENTER; schedule_work(&dp->work); return 0; @@ -625,6 +779,7 @@ void dp_altmode_remove(struct typec_altmode *alt) struct dp_altmode *dp = typec_altmode_get_drvdata(alt); cancel_work_sync(&dp->work); + typec_altmode_put_plug(dp->plug_prime); if (dp->connector_fwnode) { drm_connector_oob_hotplug_event(dp->connector_fwnode, diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c index e95ec7e382bb7..6ea103e1abae9 100644 --- a/drivers/usb/typec/bus.c +++ b/drivers/usb/typec/bus.c @@ -245,6 +245,108 @@ typec_altmode_get_partner(struct typec_altmode *adev) EXPORT_SYMBOL_GPL(typec_altmode_get_partner); /* -------------------------------------------------------------------------- */ +/* API for cable alternate modes */ + +/** + * typec_cable_altmode_enter - Enter Mode + * @adev: The alternate mode + * @sop: Cable plug target for Enter Mode command + * @vdo: VDO for the Enter Mode command + * + * Alternate mode drivers use this function to enter mode on the cable plug. + * If the alternate mode does not require VDO, @vdo must be NULL. + */ +int typec_cable_altmode_enter(struct typec_altmode *adev, enum typec_plug_index sop, u32 *vdo) +{ + struct altmode *partner = to_altmode(adev)->partner; + struct typec_altmode *pdev; + + if (!adev || adev->active) + return 0; + + if (!partner) + return -ENODEV; + + pdev = &partner->adev; + + if (!pdev->active) + return -EPERM; + + if (!pdev->cable_ops || !pdev->cable_ops->enter) + return -EOPNOTSUPP; + + return pdev->cable_ops->enter(pdev, sop, vdo); +} +EXPORT_SYMBOL_GPL(typec_cable_altmode_enter); + +/** + * typec_cable_altmode_exit - Exit Mode + * @adev: The alternate mode + * @sop: Cable plug target for Exit Mode command + * + * The alternate mode drivers use this function to exit mode on the cable plug. + */ +int typec_cable_altmode_exit(struct typec_altmode *adev, enum typec_plug_index sop) +{ + struct altmode *partner = to_altmode(adev)->partner; + struct typec_altmode *pdev; + + if (!adev || !adev->active) + return 0; + + if (!partner) + return -ENODEV; + + pdev = &partner->adev; + + if (!pdev->cable_ops || !pdev->cable_ops->exit) + return -EOPNOTSUPP; + + return pdev->cable_ops->exit(pdev, sop); +} +EXPORT_SYMBOL_GPL(typec_cable_altmode_exit); + +/** + * typec_cable_altmode_vdm - Send Vendor Defined Messages (VDM) between the cable plug and port. + * @adev: Alternate mode handle + * @sop: Cable plug target for VDM + * @header: VDM Header + * @vdo: Array of Vendor Defined Data Objects + * @count: Number of Data Objects + * + * The alternate mode drivers use this function for SVID specific communication + * with the cable plugs. The port drivers use it to deliver the Structured VDMs + * received from the cable plugs to the alternate mode drivers. + */ +int typec_cable_altmode_vdm(struct typec_altmode *adev, enum typec_plug_index sop, + const u32 header, const u32 *vdo, int count) +{ + struct altmode *altmode; + struct typec_altmode *pdev; + + if (!adev) + return 0; + + altmode = to_altmode(adev); + + if (is_typec_plug(adev->dev.parent)) { + if (!altmode->partner) + return -ENODEV; + pdev = &altmode->partner->adev; + } else { + if (!altmode->plug[sop]) + return -ENODEV; + pdev = &altmode->plug[sop]->adev; + } + + if (!pdev->cable_ops || !pdev->cable_ops->vdm) + return -EOPNOTSUPP; + + return pdev->cable_ops->vdm(pdev, sop, header, vdo, count); +} +EXPORT_SYMBOL_GPL(typec_cable_altmode_vdm); + +/* -------------------------------------------------------------------------- */ /* API for the alternate mode drivers */ /** diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 015aa92533536..389c7f0b8d935 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -21,7 +21,7 @@ static DEFINE_IDA(typec_index_ida); -struct class typec_class = { +const struct class typec_class = { .name = "typec", }; @@ -2132,6 +2132,46 @@ int typec_get_negotiated_svdm_version(struct typec_port *port) EXPORT_SYMBOL_GPL(typec_get_negotiated_svdm_version); /** + * typec_get_cable_svdm_version - Get cable negotiated SVDM Version + * @port: USB Type-C Port. + * + * Get the negotiated SVDM Version for the cable. The Version is set to the port + * default value based on the PD Revision during cable registration, and updated + * after a successful Discover Identity if the negotiated value is less than the + * default. + * + * Returns usb_pd_svdm_ver if the cable has been registered otherwise -ENODEV. + */ +int typec_get_cable_svdm_version(struct typec_port *port) +{ + enum usb_pd_svdm_ver svdm_version; + struct device *cable_dev; + + cable_dev = device_find_child(&port->dev, NULL, cable_match); + if (!cable_dev) + return -ENODEV; + + svdm_version = to_typec_cable(cable_dev)->svdm_version; + put_device(cable_dev); + + return svdm_version; +} +EXPORT_SYMBOL_GPL(typec_get_cable_svdm_version); + +/** + * typec_cable_set_svdm_version - Set negotiated Structured VDM (SVDM) Version + * @cable: USB Type-C Active Cable that supports SVDM + * @svdm_version: Negotiated SVDM Version + * + * This routine is used to save the negotiated SVDM Version. + */ +void typec_cable_set_svdm_version(struct typec_cable *cable, enum usb_pd_svdm_ver svdm_version) +{ + cable->svdm_version = svdm_version; +} +EXPORT_SYMBOL_GPL(typec_cable_set_svdm_version); + +/** * typec_get_drvdata - Return private driver data pointer * @port: USB Type-C port */ @@ -2281,6 +2321,25 @@ void typec_port_register_altmodes(struct typec_port *port, EXPORT_SYMBOL_GPL(typec_port_register_altmodes); /** + * typec_port_register_cable_ops - Register typec_cable_ops to port altmodes + * @altmodes: USB Type-C Port's altmode vector + * @max_altmodes: The maximum number of alt modes supported by the port + * @ops: Cable alternate mode vector + */ +void typec_port_register_cable_ops(struct typec_altmode **altmodes, int max_altmodes, + const struct typec_cable_ops *ops) +{ + int i; + + for (i = 0; i < max_altmodes; i++) { + if (!altmodes[i]) + return; + altmodes[i]->cable_ops = ops; + } +} +EXPORT_SYMBOL_GPL(typec_port_register_cable_ops); + +/** * typec_register_port - Register a USB Type-C Port * @parent: Parent device * @cap: Description of the port diff --git a/drivers/usb/typec/class.h b/drivers/usb/typec/class.h index c36761ba3f599..7485cdb9dd201 100644 --- a/drivers/usb/typec/class.h +++ b/drivers/usb/typec/class.h @@ -23,6 +23,7 @@ struct typec_cable { struct usb_pd_identity *identity; unsigned int active:1; u16 pd_revision; /* 0300H = "3.0" */ + enum usb_pd_svdm_ver svdm_version; }; struct typec_partner { @@ -92,9 +93,9 @@ extern const struct device_type typec_port_dev_type; #define is_typec_plug(dev) ((dev)->type == &typec_plug_dev_type) #define is_typec_port(dev) ((dev)->type == &typec_port_dev_type) -extern struct class typec_mux_class; -extern struct class retimer_class; -extern struct class typec_class; +extern const struct class typec_mux_class; +extern const struct class retimer_class; +extern const struct class typec_class; #if defined(CONFIG_ACPI) int typec_link_ports(struct typec_port *connector); diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c index 80dd91938d960..49926d6e72c71 100644 --- a/drivers/usb/typec/mux.c +++ b/drivers/usb/typec/mux.c @@ -469,6 +469,6 @@ void *typec_mux_get_drvdata(struct typec_mux_dev *mux_dev) } EXPORT_SYMBOL_GPL(typec_mux_get_drvdata); -struct class typec_mux_class = { +const struct class typec_mux_class = { .name = "typec_mux", }; diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig index d2cb5e733e573..399c7b0983df3 100644 --- a/drivers/usb/typec/mux/Kconfig +++ b/drivers/usb/typec/mux/Kconfig @@ -36,6 +36,16 @@ config TYPEC_MUX_INTEL_PMC control the USB role switch and also the multiplexer/demultiplexer switches used with USB Type-C Alternate Modes. +config TYPEC_MUX_IT5205 + tristate "ITE IT5205 Type-C USB Alt Mode Passive MUX driver" + depends on I2C + select REGMAP_I2C + help + Driver for the ITE IT5205 Type-C USB Alternate Mode Passive MUX + which provides support for muxing DisplayPort and sideband signals + on a common USB Type-C connector. + If compiled as a module, the module will be named it5205. + config TYPEC_MUX_NB7VPQ904M tristate "On Semiconductor NB7VPQ904M Type-C redriver driver" depends on I2C diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile index 57dc9ac6f8dcf..bb96f30267af0 100644 --- a/drivers/usb/typec/mux/Makefile +++ b/drivers/usb/typec/mux/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_TYPEC_MUX_FSA4480) += fsa4480.o obj-$(CONFIG_TYPEC_MUX_GPIO_SBU) += gpio-sbu-mux.o obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o obj-$(CONFIG_TYPEC_MUX_INTEL_PMC) += intel_pmc_mux.o +obj-$(CONFIG_TYPEC_MUX_IT5205) += it5205.o obj-$(CONFIG_TYPEC_MUX_NB7VPQ904M) += nb7vpq904m.o obj-$(CONFIG_TYPEC_MUX_PTN36502) += ptn36502.o obj-$(CONFIG_TYPEC_MUX_WCD939X_USBSS) += wcd939x-usbss.o diff --git a/drivers/usb/typec/mux/it5205.c b/drivers/usb/typec/mux/it5205.c new file mode 100644 index 0000000000000..5535932e42cde --- /dev/null +++ b/drivers/usb/typec/mux/it5205.c @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ITE IT5205 Type-C USB alternate mode passive mux + * + * Copyright (c) 2020 MediaTek Inc. + * Copyright (c) 2024 Collabora Ltd. + * AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + * + */ + +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/tcpm.h> +#include <linux/usb/typec.h> +#include <linux/usb/typec_dp.h> +#include <linux/usb/typec_mux.h> + +#define IT5205_REG_CHIP_ID(x) (0x4 + (x)) +#define IT5205FN_CHIP_ID 0x35323035 /* "5205" */ + +/* MUX power down register */ +#define IT5205_REG_MUXPDR 0x10 +#define IT5205_MUX_POWER_DOWN BIT(0) + +/* MUX control register */ +#define IT5205_REG_MUXCR 0x11 +#define IT5205_POLARITY_INVERTED BIT(4) +#define IT5205_DP_USB_CTRL_MASK GENMASK(3, 0) +#define IT5205_DP 0x0f +#define IT5205_DP_USB 0x03 +#define IT5205_USB 0x07 + +/* Vref Select Register */ +#define IT5205_REG_VSR 0x10 +#define IT5205_VREF_SELECT_MASK GENMASK(5, 4) +#define IT5205_VREF_SELECT_3_3V 0x00 +#define IT5205_VREF_SELECT_OFF 0x20 + +/* CSBU Over Voltage Protection Register */ +#define IT5205_REG_CSBUOVPSR 0x1e +#define IT5205_OVP_SELECT_MASK GENMASK(5, 4) +#define IT5205_OVP_3_90V 0x00 +#define IT5205_OVP_3_68V 0x10 +#define IT5205_OVP_3_62V 0x20 +#define IT5205_OVP_3_57V 0x30 + +/* CSBU Switch Register */ +#define IT5205_REG_CSBUSR 0x22 +#define IT5205_CSBUSR_SWITCH BIT(0) + +/* Interrupt Switch Register */ +#define IT5205_REG_ISR 0x25 +#define IT5205_ISR_CSBU_MASK BIT(4) +#define IT5205_ISR_CSBU_OVP BIT(0) + +struct it5205 { + struct i2c_client *client; + struct regmap *regmap; + struct typec_switch_dev *sw; + struct typec_mux_dev *mux; +}; + +static int it5205_switch_set(struct typec_switch_dev *sw, enum typec_orientation orientation) +{ + struct it5205 *it = typec_switch_get_drvdata(sw); + + switch (orientation) { + case TYPEC_ORIENTATION_NORMAL: + regmap_update_bits(it->regmap, IT5205_REG_MUXCR, + IT5205_POLARITY_INVERTED, 0); + break; + case TYPEC_ORIENTATION_REVERSE: + regmap_update_bits(it->regmap, IT5205_REG_MUXCR, + IT5205_POLARITY_INVERTED, IT5205_POLARITY_INVERTED); + break; + case TYPEC_ORIENTATION_NONE: + fallthrough; + default: + regmap_write(it->regmap, IT5205_REG_MUXCR, 0); + break; + } + + return 0; +} + +static int it5205_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) +{ + struct it5205 *it = typec_mux_get_drvdata(mux); + u8 val; + + if (state->mode >= TYPEC_STATE_MODAL && + state->alt->svid != USB_TYPEC_DP_SID) + return -EINVAL; + + switch (state->mode) { + case TYPEC_STATE_USB: + val = IT5205_USB; + break; + case TYPEC_DP_STATE_C: + fallthrough; + case TYPEC_DP_STATE_E: + val = IT5205_DP; + break; + case TYPEC_DP_STATE_D: + val = IT5205_DP_USB; + break; + case TYPEC_STATE_SAFE: + fallthrough; + default: + val = 0; + break; + } + + return regmap_update_bits(it->regmap, IT5205_REG_MUXCR, + IT5205_DP_USB_CTRL_MASK, val); +} + +static irqreturn_t it5205_irq_handler(int irq, void *data) +{ + struct it5205 *it = data; + int ret; + u32 val; + + ret = regmap_read(it->regmap, IT5205_REG_ISR, &val); + if (ret) + return IRQ_NONE; + + if (val & IT5205_ISR_CSBU_OVP) { + dev_warn(&it->client->dev, "Overvoltage detected!\n"); + + /* Reset CSBU */ + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR, + IT5205_CSBUSR_SWITCH, 0); + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR, + IT5205_CSBUSR_SWITCH, IT5205_CSBUSR_SWITCH); + } + + return IRQ_HANDLED; +} + +static void it5205_enable_ovp(struct it5205 *it) +{ + /* Select Vref 3.3v */ + regmap_update_bits(it->regmap, IT5205_REG_VSR, + IT5205_VREF_SELECT_MASK, IT5205_VREF_SELECT_3_3V); + + /* Trigger OVP at 3.68V */ + regmap_update_bits(it->regmap, IT5205_REG_CSBUOVPSR, + IT5205_OVP_SELECT_MASK, IT5205_OVP_3_68V); + + /* Unmask OVP interrupt */ + regmap_update_bits(it->regmap, IT5205_REG_ISR, + IT5205_ISR_CSBU_MASK, 0); + + /* Enable CSBU Interrupt */ + regmap_update_bits(it->regmap, IT5205_REG_CSBUSR, + IT5205_CSBUSR_SWITCH, IT5205_CSBUSR_SWITCH); +} + +static const struct regmap_config it5205_regmap = { + .max_register = 0x2f, + .reg_bits = 8, + .val_bits = 8, +}; + +static int it5205_probe(struct i2c_client *client) +{ + struct typec_switch_desc sw_desc = { }; + struct typec_mux_desc mux_desc = { }; + struct device *dev = &client->dev; + struct it5205 *it; + u32 val, chipid = 0; + int i, ret; + + it = devm_kzalloc(dev, sizeof(*it), GFP_KERNEL); + if (!it) + return -ENOMEM; + + ret = devm_regulator_get_enable(dev, "vcc"); + if (ret) + return dev_err_probe(dev, ret, "Failed to get regulator\n"); + + it->client = client; + + it->regmap = devm_regmap_init_i2c(client, &it5205_regmap); + if (IS_ERR(it->regmap)) + return dev_err_probe(dev, PTR_ERR(it->regmap), + "Failed to init regmap\n"); + + /* IT5205 needs a long time to power up after enabling regulator */ + msleep(50); + + /* Unset poweroff bit */ + ret = regmap_write(it->regmap, IT5205_REG_MUXPDR, 0); + if (ret) + return dev_err_probe(dev, ret, "Failed to set power on\n"); + + /* Read the 32 bits ChipID */ + for (i = 3; i >= 0; i--) { + ret = regmap_read(it->regmap, IT5205_REG_CHIP_ID(i), &val); + if (ret) + return ret; + + chipid |= val << (i * 8); + } + + if (chipid != IT5205FN_CHIP_ID) + return dev_err_probe(dev, -EINVAL, + "Unknown ChipID 0x%x\n", chipid); + + /* Initialize as USB mode with default (non-inverted) polarity */ + ret = regmap_write(it->regmap, IT5205_REG_MUXCR, IT5205_USB); + if (ret) + return dev_err_probe(dev, ret, "Cannot set mode to USB\n"); + + sw_desc.drvdata = it; + sw_desc.fwnode = dev_fwnode(dev); + sw_desc.set = it5205_switch_set; + + it->sw = typec_switch_register(dev, &sw_desc); + if (IS_ERR(it->sw)) + return dev_err_probe(dev, PTR_ERR(it->sw), + "failed to register typec switch\n"); + + mux_desc.drvdata = it; + mux_desc.fwnode = dev_fwnode(dev); + mux_desc.set = it5205_mux_set; + + it->mux = typec_mux_register(dev, &mux_desc); + if (IS_ERR(it->mux)) { + typec_switch_unregister(it->sw); + return dev_err_probe(dev, PTR_ERR(it->mux), + "failed to register typec mux\n"); + } + + i2c_set_clientdata(client, it); + + if (of_property_read_bool(dev->of_node, "ite,ovp-enable") && client->irq) { + it5205_enable_ovp(it); + + ret = devm_request_threaded_irq(dev, client->irq, NULL, + it5205_irq_handler, + IRQF_ONESHOT, dev_name(dev), it); + if (ret) { + typec_mux_unregister(it->mux); + typec_switch_unregister(it->sw); + return dev_err_probe(dev, ret, "Failed to request irq\n"); + } + } + + return 0; +} + +static void it5205_remove(struct i2c_client *client) +{ + struct it5205 *it = i2c_get_clientdata(client); + + typec_mux_unregister(it->mux); + typec_switch_unregister(it->sw); +} + +static const struct i2c_device_id it5205_table[] = { + { "it5205" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, it5205_table); + +static const struct of_device_id it5205_of_table[] = { + { .compatible = "ite,it5205" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, it5205_of_table); + +static struct i2c_driver it5205_driver = { + .driver = { + .name = "it5205", + .of_match_table = it5205_of_table, + }, + .probe = it5205_probe, + .remove = it5205_remove, + .id_table = it5205_table, +}; +module_i2c_driver(it5205_driver); + +MODULE_AUTHOR("Tianping Fang <tianping.fang@mediatek.com>"); +MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>"); +MODULE_DESCRIPTION("ITE IT5205 alternate mode passive MUX driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/typec/pd.c b/drivers/usb/typec/pd.c index b9cca2be76fce..d78c04a421bc2 100644 --- a/drivers/usb/typec/pd.c +++ b/drivers/usb/typec/pd.c @@ -157,7 +157,7 @@ static const struct attribute_group source_fixed_supply_group = { }; __ATTRIBUTE_GROUPS(source_fixed_supply); -static struct device_type source_fixed_supply_type = { +static const struct device_type source_fixed_supply_type = { .name = "pdo", .release = pdo_release, .groups = source_fixed_supply_groups, @@ -182,7 +182,7 @@ static const struct attribute_group sink_fixed_supply_group = { }; __ATTRIBUTE_GROUPS(sink_fixed_supply); -static struct device_type sink_fixed_supply_type = { +static const struct device_type sink_fixed_supply_type = { .name = "pdo", .release = pdo_release, .groups = sink_fixed_supply_groups, @@ -213,7 +213,7 @@ static struct attribute *source_variable_supply_attrs[] = { }; ATTRIBUTE_GROUPS(source_variable_supply); -static struct device_type source_variable_supply_type = { +static const struct device_type source_variable_supply_type = { .name = "pdo", .release = pdo_release, .groups = source_variable_supply_groups, @@ -227,7 +227,7 @@ static struct attribute *sink_variable_supply_attrs[] = { }; ATTRIBUTE_GROUPS(sink_variable_supply); -static struct device_type sink_variable_supply_type = { +static const struct device_type sink_variable_supply_type = { .name = "pdo", .release = pdo_release, .groups = sink_variable_supply_groups, @@ -258,7 +258,7 @@ static struct attribute *source_battery_attrs[] = { }; ATTRIBUTE_GROUPS(source_battery); -static struct device_type source_battery_type = { +static const struct device_type source_battery_type = { .name = "pdo", .release = pdo_release, .groups = source_battery_groups, @@ -272,7 +272,7 @@ static struct attribute *sink_battery_attrs[] = { }; ATTRIBUTE_GROUPS(sink_battery); -static struct device_type sink_battery_type = { +static const struct device_type sink_battery_type = { .name = "pdo", .release = pdo_release, .groups = sink_battery_groups, @@ -339,7 +339,7 @@ static struct attribute *source_pps_attrs[] = { }; ATTRIBUTE_GROUPS(source_pps); -static struct device_type source_pps_type = { +static const struct device_type source_pps_type = { .name = "pdo", .release = pdo_release, .groups = source_pps_groups, @@ -353,7 +353,7 @@ static struct attribute *sink_pps_attrs[] = { }; ATTRIBUTE_GROUPS(sink_pps); -static struct device_type sink_pps_type = { +static const struct device_type sink_pps_type = { .name = "pdo", .release = pdo_release, .groups = sink_pps_groups, @@ -371,30 +371,30 @@ static const char * const apdo_supply_name[] = { [APDO_TYPE_PPS] = "programmable_supply", }; -static struct device_type *source_type[] = { +static const struct device_type *source_type[] = { [PDO_TYPE_FIXED] = &source_fixed_supply_type, [PDO_TYPE_BATT] = &source_battery_type, [PDO_TYPE_VAR] = &source_variable_supply_type, }; -static struct device_type *source_apdo_type[] = { +static const struct device_type *source_apdo_type[] = { [APDO_TYPE_PPS] = &source_pps_type, }; -static struct device_type *sink_type[] = { +static const struct device_type *sink_type[] = { [PDO_TYPE_FIXED] = &sink_fixed_supply_type, [PDO_TYPE_BATT] = &sink_battery_type, [PDO_TYPE_VAR] = &sink_variable_supply_type, }; -static struct device_type *sink_apdo_type[] = { +static const struct device_type *sink_apdo_type[] = { [APDO_TYPE_PPS] = &sink_pps_type, }; /* REVISIT: Export when EPR_*_Capabilities need to be supported. */ static int add_pdo(struct usb_power_delivery_capabilities *cap, u32 pdo, int position) { - struct device_type *type; + const struct device_type *type; const char *name; struct pdo *p; int ret; @@ -460,7 +460,7 @@ static void pd_capabilities_release(struct device *dev) kfree(to_usb_power_delivery_capabilities(dev)); } -static struct device_type pd_capabilities_type = { +static const struct device_type pd_capabilities_type = { .name = "capabilities", .release = pd_capabilities_release, }; @@ -575,7 +575,7 @@ static void pd_release(struct device *dev) kfree(pd); } -static struct device_type pd_type = { +static const struct device_type pd_type = { .name = "usb_power_delivery", .release = pd_release, .groups = pd_groups, diff --git a/drivers/usb/typec/retimer.c b/drivers/usb/typec/retimer.c index 4a7d1b5c4d866..b519fcf358caf 100644 --- a/drivers/usb/typec/retimer.c +++ b/drivers/usb/typec/retimer.c @@ -155,6 +155,6 @@ void *typec_retimer_get_drvdata(struct typec_retimer *retimer) } EXPORT_SYMBOL_GPL(typec_retimer_get_drvdata); -struct class retimer_class = { +const struct class retimer_class = { .name = "retimer", }; diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index bc21006e979c6..ef18a448b7406 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -1467,7 +1467,7 @@ static int fusb302_pd_read_message(struct fusb302_chip *chip, if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC)) tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS); else - tcpm_pd_receive(chip->tcpm_port, msg); + tcpm_pd_receive(chip->tcpm_port, msg, TCPC_TX_SOP); return ret; } diff --git a/drivers/usb/typec/tcpm/qcom/Makefile b/drivers/usb/typec/tcpm/qcom/Makefile index dc1e8832e197a..cc23042b94878 100644 --- a/drivers/usb/typec/tcpm/qcom/Makefile +++ b/drivers/usb/typec/tcpm/qcom/Makefile @@ -3,4 +3,5 @@ obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom_pmic_tcpm.o qcom_pmic_tcpm-y += qcom_pmic_typec.o \ qcom_pmic_typec_port.o \ - qcom_pmic_typec_pdphy.o + qcom_pmic_typec_pdphy.o \ + qcom_pmic_typec_pdphy_stub.o \ diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c index 1a2b4bddaa97e..e48412cdcb0fb 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c @@ -20,130 +20,15 @@ #include <drm/bridge/aux-bridge.h> +#include "qcom_pmic_typec.h" #include "qcom_pmic_typec_pdphy.h" #include "qcom_pmic_typec_port.h" struct pmic_typec_resources { - struct pmic_typec_pdphy_resources *pdphy_res; - struct pmic_typec_port_resources *port_res; + const struct pmic_typec_pdphy_resources *pdphy_res; + const struct pmic_typec_port_resources *port_res; }; -struct pmic_typec { - struct device *dev; - struct tcpm_port *tcpm_port; - struct tcpc_dev tcpc; - struct pmic_typec_pdphy *pmic_typec_pdphy; - struct pmic_typec_port *pmic_typec_port; - bool vbus_enabled; - struct mutex lock; /* VBUS state serialization */ -}; - -#define tcpc_to_tcpm(_tcpc_) container_of(_tcpc_, struct pmic_typec, tcpc) - -static int qcom_pmic_typec_get_vbus(struct tcpc_dev *tcpc) -{ - struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); - int ret; - - mutex_lock(&tcpm->lock); - ret = tcpm->vbus_enabled || qcom_pmic_typec_port_get_vbus(tcpm->pmic_typec_port); - mutex_unlock(&tcpm->lock); - - return ret; -} - -static int qcom_pmic_typec_set_vbus(struct tcpc_dev *tcpc, bool on, bool sink) -{ - struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); - int ret = 0; - - mutex_lock(&tcpm->lock); - if (tcpm->vbus_enabled == on) - goto done; - - ret = qcom_pmic_typec_port_set_vbus(tcpm->pmic_typec_port, on); - if (ret) - goto done; - - tcpm->vbus_enabled = on; - tcpm_vbus_change(tcpm->tcpm_port); - -done: - dev_dbg(tcpm->dev, "set_vbus set: %d result %d\n", on, ret); - mutex_unlock(&tcpm->lock); - - return ret; -} - -static int qcom_pmic_typec_set_vconn(struct tcpc_dev *tcpc, bool on) -{ - struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); - - return qcom_pmic_typec_port_set_vconn(tcpm->pmic_typec_port, on); -} - -static int qcom_pmic_typec_get_cc(struct tcpc_dev *tcpc, - enum typec_cc_status *cc1, - enum typec_cc_status *cc2) -{ - struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); - - return qcom_pmic_typec_port_get_cc(tcpm->pmic_typec_port, cc1, cc2); -} - -static int qcom_pmic_typec_set_cc(struct tcpc_dev *tcpc, - enum typec_cc_status cc) -{ - struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); - - return qcom_pmic_typec_port_set_cc(tcpm->pmic_typec_port, cc); -} - -static int qcom_pmic_typec_set_polarity(struct tcpc_dev *tcpc, - enum typec_cc_polarity pol) -{ - /* Polarity is set separately by phy-qcom-qmp.c */ - return 0; -} - -static int qcom_pmic_typec_start_toggling(struct tcpc_dev *tcpc, - enum typec_port_type port_type, - enum typec_cc_status cc) -{ - struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); - - return qcom_pmic_typec_port_start_toggling(tcpm->pmic_typec_port, - port_type, cc); -} - -static int qcom_pmic_typec_set_roles(struct tcpc_dev *tcpc, bool attached, - enum typec_role power_role, - enum typec_data_role data_role) -{ - struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); - - return qcom_pmic_typec_pdphy_set_roles(tcpm->pmic_typec_pdphy, - data_role, power_role); -} - -static int qcom_pmic_typec_set_pd_rx(struct tcpc_dev *tcpc, bool on) -{ - struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); - - return qcom_pmic_typec_pdphy_set_pd_rx(tcpm->pmic_typec_pdphy, on); -} - -static int qcom_pmic_typec_pd_transmit(struct tcpc_dev *tcpc, - enum tcpm_transmit_type type, - const struct pd_message *msg, - unsigned int negotiated_rev) -{ - struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); - - return qcom_pmic_typec_pdphy_pd_transmit(tcpm->pmic_typec_pdphy, type, - msg, negotiated_rev); -} - static int qcom_pmic_typec_init(struct tcpc_dev *tcpc) { return 0; @@ -157,7 +42,7 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev) const struct pmic_typec_resources *res; struct regmap *regmap; struct device *bridge_dev; - u32 base[2]; + u32 base; int ret; res = of_device_get_match_data(dev); @@ -170,16 +55,6 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev) tcpm->dev = dev; tcpm->tcpc.init = qcom_pmic_typec_init; - tcpm->tcpc.get_vbus = qcom_pmic_typec_get_vbus; - tcpm->tcpc.set_vbus = qcom_pmic_typec_set_vbus; - tcpm->tcpc.set_cc = qcom_pmic_typec_set_cc; - tcpm->tcpc.get_cc = qcom_pmic_typec_get_cc; - tcpm->tcpc.set_polarity = qcom_pmic_typec_set_polarity; - tcpm->tcpc.set_vconn = qcom_pmic_typec_set_vconn; - tcpm->tcpc.start_toggling = qcom_pmic_typec_start_toggling; - tcpm->tcpc.set_pd_rx = qcom_pmic_typec_set_pd_rx; - tcpm->tcpc.set_roles = qcom_pmic_typec_set_roles; - tcpm->tcpc.pd_transmit = qcom_pmic_typec_pd_transmit; regmap = dev_get_regmap(dev->parent, NULL); if (!regmap) { @@ -187,29 +62,30 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev) return -ENODEV; } - ret = of_property_read_u32_array(np, "reg", base, 2); + ret = of_property_read_u32_index(np, "reg", 0, &base); if (ret) return ret; - tcpm->pmic_typec_port = qcom_pmic_typec_port_alloc(dev); - if (IS_ERR(tcpm->pmic_typec_port)) - return PTR_ERR(tcpm->pmic_typec_port); - - tcpm->pmic_typec_pdphy = qcom_pmic_typec_pdphy_alloc(dev); - if (IS_ERR(tcpm->pmic_typec_pdphy)) - return PTR_ERR(tcpm->pmic_typec_pdphy); - - ret = qcom_pmic_typec_port_probe(pdev, tcpm->pmic_typec_port, - res->port_res, regmap, base[0]); + ret = qcom_pmic_typec_port_probe(pdev, tcpm, + res->port_res, regmap, base); if (ret) return ret; - ret = qcom_pmic_typec_pdphy_probe(pdev, tcpm->pmic_typec_pdphy, - res->pdphy_res, regmap, base[1]); - if (ret) - return ret; + if (res->pdphy_res) { + ret = of_property_read_u32_index(np, "reg", 1, &base); + if (ret) + return ret; + + ret = qcom_pmic_typec_pdphy_probe(pdev, tcpm, + res->pdphy_res, regmap, base); + if (ret) + return ret; + } else { + ret = qcom_pmic_typec_pdphy_stub_probe(pdev, tcpm); + if (ret) + return ret; + } - mutex_init(&tcpm->lock); platform_set_drvdata(pdev, tcpm); tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector"); @@ -226,13 +102,11 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev) goto fwnode_remove; } - ret = qcom_pmic_typec_port_start(tcpm->pmic_typec_port, - tcpm->tcpm_port); + ret = tcpm->port_start(tcpm, tcpm->tcpm_port); if (ret) goto fwnode_remove; - ret = qcom_pmic_typec_pdphy_start(tcpm->pmic_typec_pdphy, - tcpm->tcpm_port); + ret = tcpm->pdphy_start(tcpm, tcpm->tcpm_port); if (ret) goto fwnode_remove; @@ -248,91 +122,25 @@ static void qcom_pmic_typec_remove(struct platform_device *pdev) { struct pmic_typec *tcpm = platform_get_drvdata(pdev); - qcom_pmic_typec_pdphy_stop(tcpm->pmic_typec_pdphy); - qcom_pmic_typec_port_stop(tcpm->pmic_typec_port); + tcpm->pdphy_stop(tcpm); + tcpm->port_stop(tcpm); tcpm_unregister_port(tcpm->tcpm_port); fwnode_remove_software_node(tcpm->tcpc.fwnode); } -static struct pmic_typec_pdphy_resources pm8150b_pdphy_res = { - .irq_params = { - { - .virq = PMIC_PDPHY_SIG_TX_IRQ, - .irq_name = "sig-tx", - }, - { - .virq = PMIC_PDPHY_SIG_RX_IRQ, - .irq_name = "sig-rx", - }, - { - .virq = PMIC_PDPHY_MSG_TX_IRQ, - .irq_name = "msg-tx", - }, - { - .virq = PMIC_PDPHY_MSG_RX_IRQ, - .irq_name = "msg-rx", - }, - { - .virq = PMIC_PDPHY_MSG_TX_FAIL_IRQ, - .irq_name = "msg-tx-failed", - }, - { - .virq = PMIC_PDPHY_MSG_TX_DISCARD_IRQ, - .irq_name = "msg-tx-discarded", - }, - { - .virq = PMIC_PDPHY_MSG_RX_DISCARD_IRQ, - .irq_name = "msg-rx-discarded", - }, - }, - .nr_irqs = 7, -}; - -static struct pmic_typec_port_resources pm8150b_port_res = { - .irq_params = { - { - .irq_name = "vpd-detect", - .virq = PMIC_TYPEC_VPD_IRQ, - }, - - { - .irq_name = "cc-state-change", - .virq = PMIC_TYPEC_CC_STATE_IRQ, - }, - { - .irq_name = "vconn-oc", - .virq = PMIC_TYPEC_VCONN_OC_IRQ, - }, - - { - .irq_name = "vbus-change", - .virq = PMIC_TYPEC_VBUS_IRQ, - }, - - { - .irq_name = "attach-detach", - .virq = PMIC_TYPEC_ATTACH_DETACH_IRQ, - }, - { - .irq_name = "legacy-cable-detect", - .virq = PMIC_TYPEC_LEGACY_CABLE_IRQ, - }, - - { - .irq_name = "try-snk-src-detect", - .virq = PMIC_TYPEC_TRY_SNK_SRC_IRQ, - }, - }, - .nr_irqs = 7, +static const struct pmic_typec_resources pm8150b_typec_res = { + .pdphy_res = &pm8150b_pdphy_res, + .port_res = &pm8150b_port_res, }; -static struct pmic_typec_resources pm8150b_typec_res = { - .pdphy_res = &pm8150b_pdphy_res, +static const struct pmic_typec_resources pmi632_typec_res = { + /* PD PHY not present */ .port_res = &pm8150b_port_res, }; static const struct of_device_id qcom_pmic_typec_table[] = { { .compatible = "qcom,pm8150b-typec", .data = &pm8150b_typec_res }, + { .compatible = "qcom,pmi632-typec", .data = &pmi632_typec_res }, { } }; MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table); diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.h b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.h new file mode 100644 index 0000000000000..3c75820c91876 --- /dev/null +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.h @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Linaro Ltd. All rights reserved. + */ + +#ifndef __QCOM_PMIC_TYPEC_H__ +#define __QCOM_PMIC_TYPEC_H__ + +struct pmic_typec { + struct device *dev; + struct tcpm_port *tcpm_port; + struct tcpc_dev tcpc; + struct pmic_typec_pdphy *pmic_typec_pdphy; + struct pmic_typec_port *pmic_typec_port; + + int (*pdphy_start)(struct pmic_typec *tcpm, + struct tcpm_port *tcpm_port); + void (*pdphy_stop)(struct pmic_typec *tcpm); + + int (*port_start)(struct pmic_typec *tcpm, + struct tcpm_port *tcpm_port); + void (*port_stop)(struct pmic_typec *tcpm); +}; + +#define tcpc_to_tcpm(_tcpc_) container_of(_tcpc_, struct pmic_typec, tcpc) + +#endif diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c index 52c81378e36ef..6560f4fc98d5a 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c @@ -14,8 +14,74 @@ #include <linux/slab.h> #include <linux/usb/pd.h> #include <linux/usb/tcpm.h> +#include "qcom_pmic_typec.h" #include "qcom_pmic_typec_pdphy.h" +/* PD PHY register offsets and bit fields */ +#define USB_PDPHY_MSG_CONFIG_REG 0x40 +#define MSG_CONFIG_PORT_DATA_ROLE BIT(3) +#define MSG_CONFIG_PORT_POWER_ROLE BIT(2) +#define MSG_CONFIG_SPEC_REV_MASK (BIT(1) | BIT(0)) + +#define USB_PDPHY_EN_CONTROL_REG 0x46 +#define CONTROL_ENABLE BIT(0) + +#define USB_PDPHY_RX_STATUS_REG 0x4A +#define RX_FRAME_TYPE (BIT(0) | BIT(1) | BIT(2)) + +#define USB_PDPHY_FRAME_FILTER_REG 0x4C +#define FRAME_FILTER_EN_HARD_RESET BIT(5) +#define FRAME_FILTER_EN_SOP BIT(0) + +#define USB_PDPHY_TX_SIZE_REG 0x42 +#define TX_SIZE_MASK 0xF + +#define USB_PDPHY_TX_CONTROL_REG 0x44 +#define TX_CONTROL_RETRY_COUNT(n) (((n) & 0x3) << 5) +#define TX_CONTROL_FRAME_TYPE(n) (((n) & 0x7) << 2) +#define TX_CONTROL_FRAME_TYPE_CABLE_RESET (0x1 << 2) +#define TX_CONTROL_SEND_SIGNAL BIT(1) +#define TX_CONTROL_SEND_MSG BIT(0) + +#define USB_PDPHY_RX_SIZE_REG 0x48 + +#define USB_PDPHY_RX_ACKNOWLEDGE_REG 0x4B +#define RX_BUFFER_TOKEN BIT(0) + +#define USB_PDPHY_BIST_MODE_REG 0x4E +#define BIST_MODE_MASK 0xF +#define BIST_ENABLE BIT(7) +#define PD_MSG_BIST 0x3 +#define PD_BIST_TEST_DATA_MODE 0x8 + +#define USB_PDPHY_TX_BUFFER_HDR_REG 0x60 +#define USB_PDPHY_TX_BUFFER_DATA_REG 0x62 + +#define USB_PDPHY_RX_BUFFER_REG 0x80 + +/* VDD regulator */ +#define VDD_PDPHY_VOL_MIN 2800000 /* uV */ +#define VDD_PDPHY_VOL_MAX 3300000 /* uV */ +#define VDD_PDPHY_HPM_LOAD 3000 /* uA */ + +/* Message Spec Rev field */ +#define PD_MSG_HDR_REV(hdr) (((hdr) >> 6) & 3) + +/* timers */ +#define RECEIVER_RESPONSE_TIME 15 /* tReceiverResponse */ +#define HARD_RESET_COMPLETE_TIME 5 /* tHardResetComplete */ + +/* Interrupt numbers */ +#define PMIC_PDPHY_SIG_TX_IRQ 0x0 +#define PMIC_PDPHY_SIG_RX_IRQ 0x1 +#define PMIC_PDPHY_MSG_TX_IRQ 0x2 +#define PMIC_PDPHY_MSG_RX_IRQ 0x3 +#define PMIC_PDPHY_MSG_TX_FAIL_IRQ 0x4 +#define PMIC_PDPHY_MSG_TX_DISCARD_IRQ 0x5 +#define PMIC_PDPHY_MSG_RX_DISCARD_IRQ 0x6 +#define PMIC_PDPHY_FR_SWAP_IRQ 0x7 + + struct pmic_typec_pdphy_irq_data { int virq; int irq; @@ -231,11 +297,13 @@ done: return ret; } -int qcom_pmic_typec_pdphy_pd_transmit(struct pmic_typec_pdphy *pmic_typec_pdphy, - enum tcpm_transmit_type type, - const struct pd_message *msg, - unsigned int negotiated_rev) +static int qcom_pmic_typec_pdphy_pd_transmit(struct tcpc_dev *tcpc, + enum tcpm_transmit_type type, + const struct pd_message *msg, + unsigned int negotiated_rev) { + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct pmic_typec_pdphy *pmic_typec_pdphy = tcpm->pmic_typec_pdphy; struct device *dev = pmic_typec_pdphy->dev; int ret; @@ -299,7 +367,7 @@ done: if (!ret) { dev_vdbg(dev, "pd_receive: handing %d bytes to tcpm\n", size); - tcpm_pd_receive(pmic_typec_pdphy->tcpm_port, &msg); + tcpm_pd_receive(pmic_typec_pdphy->tcpm_port, &msg, TCPC_TX_SOP); } } @@ -336,8 +404,10 @@ static irqreturn_t qcom_pmic_typec_pdphy_isr(int irq, void *dev_id) return IRQ_HANDLED; } -int qcom_pmic_typec_pdphy_set_pd_rx(struct pmic_typec_pdphy *pmic_typec_pdphy, bool on) +static int qcom_pmic_typec_pdphy_set_pd_rx(struct tcpc_dev *tcpc, bool on) { + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct pmic_typec_pdphy *pmic_typec_pdphy = tcpm->pmic_typec_pdphy; unsigned long flags; int ret; @@ -353,9 +423,12 @@ int qcom_pmic_typec_pdphy_set_pd_rx(struct pmic_typec_pdphy *pmic_typec_pdphy, b return ret; } -int qcom_pmic_typec_pdphy_set_roles(struct pmic_typec_pdphy *pmic_typec_pdphy, - bool data_role_host, bool power_role_src) +static int qcom_pmic_typec_pdphy_set_roles(struct tcpc_dev *tcpc, bool attached, + enum typec_role power_role, + enum typec_data_role data_role) { + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct pmic_typec_pdphy *pmic_typec_pdphy = tcpm->pmic_typec_pdphy; struct device *dev = pmic_typec_pdphy->dev; unsigned long flags; int ret; @@ -366,12 +439,13 @@ int qcom_pmic_typec_pdphy_set_roles(struct pmic_typec_pdphy *pmic_typec_pdphy, pmic_typec_pdphy->base + USB_PDPHY_MSG_CONFIG_REG, MSG_CONFIG_PORT_DATA_ROLE | MSG_CONFIG_PORT_POWER_ROLE, - data_role_host << 3 | power_role_src << 2); + (data_role == TYPEC_HOST ? MSG_CONFIG_PORT_DATA_ROLE : 0) | + (power_role == TYPEC_SOURCE ? MSG_CONFIG_PORT_POWER_ROLE : 0)); spin_unlock_irqrestore(&pmic_typec_pdphy->lock, flags); dev_dbg(dev, "pdphy_set_roles: data_role_host=%d power_role_src=%d\n", - data_role_host, power_role_src); + data_role, power_role); return ret; } @@ -435,9 +509,10 @@ done: return ret; } -int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy, - struct tcpm_port *tcpm_port) +static int qcom_pmic_typec_pdphy_start(struct pmic_typec *tcpm, + struct tcpm_port *tcpm_port) { + struct pmic_typec_pdphy *pmic_typec_pdphy = tcpm->pmic_typec_pdphy; int i; int ret; @@ -457,8 +532,9 @@ int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy, return 0; } -void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy) +static void qcom_pmic_typec_pdphy_stop(struct pmic_typec *tcpm) { + struct pmic_typec_pdphy *pmic_typec_pdphy = tcpm->pmic_typec_pdphy; int i; for (i = 0; i < pmic_typec_pdphy->nr_irqs; i++) @@ -469,21 +545,21 @@ void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy) regulator_disable(pmic_typec_pdphy->vdd_pdphy); } -struct pmic_typec_pdphy *qcom_pmic_typec_pdphy_alloc(struct device *dev) -{ - return devm_kzalloc(dev, sizeof(struct pmic_typec_pdphy), GFP_KERNEL); -} - int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev, - struct pmic_typec_pdphy *pmic_typec_pdphy, - struct pmic_typec_pdphy_resources *res, + struct pmic_typec *tcpm, + const struct pmic_typec_pdphy_resources *res, struct regmap *regmap, u32 base) { + struct pmic_typec_pdphy *pmic_typec_pdphy; struct device *dev = &pdev->dev; struct pmic_typec_pdphy_irq_data *irq_data; int i, ret, irq; + pmic_typec_pdphy = devm_kzalloc(dev, sizeof(*pmic_typec_pdphy), GFP_KERNEL); + if (!pmic_typec_pdphy) + return -ENOMEM; + if (!res->nr_irqs || res->nr_irqs > PMIC_PDPHY_MAX_IRQS) return -EINVAL; @@ -522,5 +598,48 @@ int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev, return ret; } + tcpm->pmic_typec_pdphy = pmic_typec_pdphy; + + tcpm->tcpc.set_pd_rx = qcom_pmic_typec_pdphy_set_pd_rx; + tcpm->tcpc.set_roles = qcom_pmic_typec_pdphy_set_roles; + tcpm->tcpc.pd_transmit = qcom_pmic_typec_pdphy_pd_transmit; + + tcpm->pdphy_start = qcom_pmic_typec_pdphy_start; + tcpm->pdphy_stop = qcom_pmic_typec_pdphy_stop; + return 0; } + +const struct pmic_typec_pdphy_resources pm8150b_pdphy_res = { + .irq_params = { + { + .virq = PMIC_PDPHY_SIG_TX_IRQ, + .irq_name = "sig-tx", + }, + { + .virq = PMIC_PDPHY_SIG_RX_IRQ, + .irq_name = "sig-rx", + }, + { + .virq = PMIC_PDPHY_MSG_TX_IRQ, + .irq_name = "msg-tx", + }, + { + .virq = PMIC_PDPHY_MSG_RX_IRQ, + .irq_name = "msg-rx", + }, + { + .virq = PMIC_PDPHY_MSG_TX_FAIL_IRQ, + .irq_name = "msg-tx-failed", + }, + { + .virq = PMIC_PDPHY_MSG_TX_DISCARD_IRQ, + .irq_name = "msg-tx-discarded", + }, + { + .virq = PMIC_PDPHY_MSG_RX_DISCARD_IRQ, + .irq_name = "msg-rx-discarded", + }, + }, + .nr_irqs = 7, +}; diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h index e67954e31b149..04dee20293cfa 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h @@ -8,74 +8,6 @@ #include <linux/platform_device.h> #include <linux/regmap.h> -#include <linux/usb/tcpm.h> - -#define USB_PDPHY_MAX_DATA_OBJ_LEN 28 -#define USB_PDPHY_MSG_HDR_LEN 2 - -/* PD PHY register offsets and bit fields */ -#define USB_PDPHY_MSG_CONFIG_REG 0x40 -#define MSG_CONFIG_PORT_DATA_ROLE BIT(3) -#define MSG_CONFIG_PORT_POWER_ROLE BIT(2) -#define MSG_CONFIG_SPEC_REV_MASK (BIT(1) | BIT(0)) - -#define USB_PDPHY_EN_CONTROL_REG 0x46 -#define CONTROL_ENABLE BIT(0) - -#define USB_PDPHY_RX_STATUS_REG 0x4A -#define RX_FRAME_TYPE (BIT(0) | BIT(1) | BIT(2)) - -#define USB_PDPHY_FRAME_FILTER_REG 0x4C -#define FRAME_FILTER_EN_HARD_RESET BIT(5) -#define FRAME_FILTER_EN_SOP BIT(0) - -#define USB_PDPHY_TX_SIZE_REG 0x42 -#define TX_SIZE_MASK 0xF - -#define USB_PDPHY_TX_CONTROL_REG 0x44 -#define TX_CONTROL_RETRY_COUNT(n) (((n) & 0x3) << 5) -#define TX_CONTROL_FRAME_TYPE(n) (((n) & 0x7) << 2) -#define TX_CONTROL_FRAME_TYPE_CABLE_RESET (0x1 << 2) -#define TX_CONTROL_SEND_SIGNAL BIT(1) -#define TX_CONTROL_SEND_MSG BIT(0) - -#define USB_PDPHY_RX_SIZE_REG 0x48 - -#define USB_PDPHY_RX_ACKNOWLEDGE_REG 0x4B -#define RX_BUFFER_TOKEN BIT(0) - -#define USB_PDPHY_BIST_MODE_REG 0x4E -#define BIST_MODE_MASK 0xF -#define BIST_ENABLE BIT(7) -#define PD_MSG_BIST 0x3 -#define PD_BIST_TEST_DATA_MODE 0x8 - -#define USB_PDPHY_TX_BUFFER_HDR_REG 0x60 -#define USB_PDPHY_TX_BUFFER_DATA_REG 0x62 - -#define USB_PDPHY_RX_BUFFER_REG 0x80 - -/* VDD regulator */ -#define VDD_PDPHY_VOL_MIN 2800000 /* uV */ -#define VDD_PDPHY_VOL_MAX 3300000 /* uV */ -#define VDD_PDPHY_HPM_LOAD 3000 /* uA */ - -/* Message Spec Rev field */ -#define PD_MSG_HDR_REV(hdr) (((hdr) >> 6) & 3) - -/* timers */ -#define RECEIVER_RESPONSE_TIME 15 /* tReceiverResponse */ -#define HARD_RESET_COMPLETE_TIME 5 /* tHardResetComplete */ - -/* Interrupt numbers */ -#define PMIC_PDPHY_SIG_TX_IRQ 0x0 -#define PMIC_PDPHY_SIG_RX_IRQ 0x1 -#define PMIC_PDPHY_MSG_TX_IRQ 0x2 -#define PMIC_PDPHY_MSG_RX_IRQ 0x3 -#define PMIC_PDPHY_MSG_TX_FAIL_IRQ 0x4 -#define PMIC_PDPHY_MSG_TX_DISCARD_IRQ 0x5 -#define PMIC_PDPHY_MSG_RX_DISCARD_IRQ 0x6 -#define PMIC_PDPHY_FR_SWAP_IRQ 0x7 /* Resources */ #define PMIC_PDPHY_MAX_IRQS 0x08 @@ -87,33 +19,19 @@ struct pmic_typec_pdphy_irq_params { struct pmic_typec_pdphy_resources { unsigned int nr_irqs; - struct pmic_typec_pdphy_irq_params irq_params[PMIC_PDPHY_MAX_IRQS]; + const struct pmic_typec_pdphy_irq_params irq_params[PMIC_PDPHY_MAX_IRQS]; }; /* API */ struct pmic_typec_pdphy; -struct pmic_typec_pdphy *qcom_pmic_typec_pdphy_alloc(struct device *dev); - +extern const struct pmic_typec_pdphy_resources pm8150b_pdphy_res; int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev, - struct pmic_typec_pdphy *pmic_typec_pdphy, - struct pmic_typec_pdphy_resources *res, + struct pmic_typec *tcpm, + const struct pmic_typec_pdphy_resources *res, struct regmap *regmap, u32 base); - -int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy, - struct tcpm_port *tcpm_port); - -void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy); - -int qcom_pmic_typec_pdphy_set_roles(struct pmic_typec_pdphy *pmic_typec_pdphy, - bool power_role_src, bool data_role_host); - -int qcom_pmic_typec_pdphy_set_pd_rx(struct pmic_typec_pdphy *pmic_typec_pdphy, bool on); - -int qcom_pmic_typec_pdphy_pd_transmit(struct pmic_typec_pdphy *pmic_typec_pdphy, - enum tcpm_transmit_type type, - const struct pd_message *msg, - unsigned int negotiated_rev); +int qcom_pmic_typec_pdphy_stub_probe(struct platform_device *pdev, + struct pmic_typec *tcpm); #endif /* __QCOM_PMIC_TYPEC_PDPHY_H__ */ diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c new file mode 100644 index 0000000000000..df79059cda675 --- /dev/null +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2024, Linaro Ltd. All rights reserved. + */ + +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/usb/pd.h> +#include <linux/usb/tcpm.h> +#include "qcom_pmic_typec.h" +#include "qcom_pmic_typec_pdphy.h" + +static int qcom_pmic_typec_pdphy_stub_pd_transmit(struct tcpc_dev *tcpc, + enum tcpm_transmit_type type, + const struct pd_message *msg, + unsigned int negotiated_rev) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct device *dev = tcpm->dev; + + dev_dbg(dev, "pdphy_transmit: type=%d\n", type); + + tcpm_pd_transmit_complete(tcpm->tcpm_port, + TCPC_TX_SUCCESS); + + return 0; +} + +static int qcom_pmic_typec_pdphy_stub_set_pd_rx(struct tcpc_dev *tcpc, bool on) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct device *dev = tcpm->dev; + + dev_dbg(dev, "set_pd_rx: %s\n", on ? "on" : "off"); + + return 0; +} + +static int qcom_pmic_typec_pdphy_stub_set_roles(struct tcpc_dev *tcpc, bool attached, + enum typec_role power_role, + enum typec_data_role data_role) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct device *dev = tcpm->dev; + + dev_dbg(dev, "pdphy_set_roles: data_role_host=%d power_role_src=%d\n", + data_role, power_role); + + return 0; +} + +static int qcom_pmic_typec_pdphy_stub_start(struct pmic_typec *tcpm, + struct tcpm_port *tcpm_port) +{ + return 0; +} + +static void qcom_pmic_typec_pdphy_stub_stop(struct pmic_typec *tcpm) +{ +} + +int qcom_pmic_typec_pdphy_stub_probe(struct platform_device *pdev, + struct pmic_typec *tcpm) +{ + tcpm->tcpc.set_pd_rx = qcom_pmic_typec_pdphy_stub_set_pd_rx; + tcpm->tcpc.set_roles = qcom_pmic_typec_pdphy_stub_set_roles; + tcpm->tcpc.pd_transmit = qcom_pmic_typec_pdphy_stub_pd_transmit; + + tcpm->pdphy_start = qcom_pmic_typec_pdphy_stub_start; + tcpm->pdphy_stop = qcom_pmic_typec_pdphy_stub_stop; + + return 0; +} diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c index a8f3f4d3a4509..a747baa297849 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.c @@ -16,8 +16,147 @@ #include <linux/usb/tcpm.h> #include <linux/usb/typec_mux.h> #include <linux/workqueue.h> + +#include "qcom_pmic_typec.h" #include "qcom_pmic_typec_port.h" +#define TYPEC_SNK_STATUS_REG 0x06 +#define DETECTED_SNK_TYPE_MASK GENMASK(6, 0) +#define SNK_DAM_MASK GENMASK(6, 4) +#define SNK_DAM_500MA BIT(6) +#define SNK_DAM_1500MA BIT(5) +#define SNK_DAM_3000MA BIT(4) +#define SNK_RP_STD BIT(3) +#define SNK_RP_1P5 BIT(2) +#define SNK_RP_3P0 BIT(1) +#define SNK_RP_SHORT BIT(0) + +#define TYPEC_SRC_STATUS_REG 0x08 +#define DETECTED_SRC_TYPE_MASK GENMASK(4, 0) +#define SRC_HIGH_BATT BIT(5) +#define SRC_DEBUG_ACCESS BIT(4) +#define SRC_RD_OPEN BIT(3) +#define SRC_RD_RA_VCONN BIT(2) +#define SRC_RA_OPEN BIT(1) +#define AUDIO_ACCESS_RA_RA BIT(0) + +#define TYPEC_STATE_MACHINE_STATUS_REG 0x09 +#define TYPEC_ATTACH_DETACH_STATE BIT(5) + +#define TYPEC_SM_STATUS_REG 0x0A +#define TYPEC_SM_VBUS_VSAFE5V BIT(5) +#define TYPEC_SM_VBUS_VSAFE0V BIT(6) +#define TYPEC_SM_USBIN_LT_LV BIT(7) + +#define TYPEC_MISC_STATUS_REG 0x0B +#define TYPEC_WATER_DETECTION_STATUS BIT(7) +#define SNK_SRC_MODE BIT(6) +#define TYPEC_VBUS_DETECT BIT(5) +#define TYPEC_VBUS_ERROR_STATUS BIT(4) +#define TYPEC_DEBOUNCE_DONE BIT(3) +#define CC_ORIENTATION BIT(1) +#define CC_ATTACHED BIT(0) + +#define LEGACY_CABLE_STATUS_REG 0x0D +#define TYPEC_LEGACY_CABLE_STATUS BIT(1) +#define TYPEC_NONCOMP_LEGACY_CABLE_STATUS BIT(0) + +#define TYPEC_U_USB_STATUS_REG 0x0F +#define U_USB_GROUND_NOVBUS BIT(6) +#define U_USB_GROUND BIT(4) +#define U_USB_FMB1 BIT(3) +#define U_USB_FLOAT1 BIT(2) +#define U_USB_FMB2 BIT(1) +#define U_USB_FLOAT2 BIT(0) + +#define TYPEC_MODE_CFG_REG 0x44 +#define TYPEC_TRY_MODE_MASK GENMASK(4, 3) +#define EN_TRY_SNK BIT(4) +#define EN_TRY_SRC BIT(3) +#define TYPEC_POWER_ROLE_CMD_MASK GENMASK(2, 0) +#define EN_SRC_ONLY BIT(2) +#define EN_SNK_ONLY BIT(1) +#define TYPEC_DISABLE_CMD BIT(0) + +#define TYPEC_VCONN_CONTROL_REG 0x46 +#define VCONN_EN_ORIENTATION BIT(2) +#define VCONN_EN_VALUE BIT(1) +#define VCONN_EN_SRC BIT(0) + +#define TYPEC_CCOUT_CONTROL_REG 0x48 +#define TYPEC_CCOUT_BUFFER_EN BIT(2) +#define TYPEC_CCOUT_VALUE BIT(1) +#define TYPEC_CCOUT_SRC BIT(0) + +#define DEBUG_ACCESS_SRC_CFG_REG 0x4C +#define EN_UNORIENTED_DEBUG_ACCESS_SRC BIT(0) + +#define TYPE_C_CRUDE_SENSOR_CFG_REG 0x4e +#define EN_SRC_CRUDE_SENSOR BIT(1) +#define EN_SNK_CRUDE_SENSOR BIT(0) + +#define TYPEC_EXIT_STATE_CFG_REG 0x50 +#define BYPASS_VSAFE0V_DURING_ROLE_SWAP BIT(3) +#define SEL_SRC_UPPER_REF BIT(2) +#define USE_TPD_FOR_EXITING_ATTACHSRC BIT(1) +#define EXIT_SNK_BASED_ON_CC BIT(0) + +#define TYPEC_CURRSRC_CFG_REG 0x52 +#define TYPEC_SRC_RP_SEL_330UA BIT(1) +#define TYPEC_SRC_RP_SEL_180UA BIT(0) +#define TYPEC_SRC_RP_SEL_80UA 0 +#define TYPEC_SRC_RP_SEL_MASK GENMASK(1, 0) + +#define TYPEC_INTERRUPT_EN_CFG_1_REG 0x5E +#define TYPEC_LEGACY_CABLE_INT_EN BIT(7) +#define TYPEC_NONCOMPLIANT_LEGACY_CABLE_INT_EN BIT(6) +#define TYPEC_TRYSOURCE_DETECT_INT_EN BIT(5) +#define TYPEC_TRYSINK_DETECT_INT_EN BIT(4) +#define TYPEC_CCOUT_DETACH_INT_EN BIT(3) +#define TYPEC_CCOUT_ATTACH_INT_EN BIT(2) +#define TYPEC_VBUS_DEASSERT_INT_EN BIT(1) +#define TYPEC_VBUS_ASSERT_INT_EN BIT(0) + +#define TYPEC_INTERRUPT_EN_CFG_2_REG 0x60 +#define TYPEC_SRC_BATT_HPWR_INT_EN BIT(6) +#define MICRO_USB_STATE_CHANGE_INT_EN BIT(5) +#define TYPEC_STATE_MACHINE_CHANGE_INT_EN BIT(4) +#define TYPEC_DEBUG_ACCESS_DETECT_INT_EN BIT(3) +#define TYPEC_WATER_DETECTION_INT_EN BIT(2) +#define TYPEC_VBUS_ERROR_INT_EN BIT(1) +#define TYPEC_DEBOUNCE_DONE_INT_EN BIT(0) + +#define TYPEC_DEBOUNCE_OPTION_REG 0x62 +#define REDUCE_TCCDEBOUNCE_TO_2MS BIT(2) + +#define TYPE_C_SBU_CFG_REG 0x6A +#define SEL_SBU1_ISRC_VAL 0x04 +#define SEL_SBU2_ISRC_VAL 0x01 + +#define TYPEC_U_USB_CFG_REG 0x70 +#define EN_MICRO_USB_FACTORY_MODE BIT(1) +#define EN_MICRO_USB_MODE BIT(0) + +#define TYPEC_PMI632_U_USB_WATER_PROTECTION_CFG_REG 0x72 + +#define TYPEC_U_USB_WATER_PROTECTION_CFG_REG 0x73 +#define EN_MICRO_USB_WATER_PROTECTION BIT(4) +#define MICRO_USB_DETECTION_ON_TIME_CFG_MASK GENMASK(3, 2) +#define MICRO_USB_DETECTION_PERIOD_CFG_MASK GENMASK(1, 0) + +#define TYPEC_PMI632_MICRO_USB_MODE_REG 0x73 +#define MICRO_USB_MODE_ONLY BIT(0) + +/* Interrupt numbers */ +#define PMIC_TYPEC_OR_RID_IRQ 0x0 +#define PMIC_TYPEC_VPD_IRQ 0x1 +#define PMIC_TYPEC_CC_STATE_IRQ 0x2 +#define PMIC_TYPEC_VCONN_OC_IRQ 0x3 +#define PMIC_TYPEC_VBUS_IRQ 0x4 +#define PMIC_TYPEC_ATTACH_DETACH_IRQ 0x5 +#define PMIC_TYPEC_LEGACY_CABLE_IRQ 0x6 +#define PMIC_TYPEC_TRY_SNK_SRC_IRQ 0x7 + struct pmic_typec_port_irq_data { int virq; int irq; @@ -33,6 +172,8 @@ struct pmic_typec_port { struct pmic_typec_port_irq_data *irq_data; struct regulator *vdd_vbus; + bool vbus_enabled; + struct mutex vbus_lock; /* VBUS state serialization */ int cc; bool debouncing_cc; @@ -131,7 +272,7 @@ done: return IRQ_HANDLED; } -int qcom_pmic_typec_port_get_vbus(struct pmic_typec_port *pmic_typec_port) +static int qcom_pmic_typec_port_vbus_detect(struct pmic_typec_port *pmic_typec_port) { struct device *dev = pmic_typec_port->dev; unsigned int misc; @@ -148,7 +289,7 @@ int qcom_pmic_typec_port_get_vbus(struct pmic_typec_port *pmic_typec_port) return !!(misc & TYPEC_VBUS_DETECT); } -int qcom_pmic_typec_port_set_vbus(struct pmic_typec_port *pmic_typec_port, bool on) +static int qcom_pmic_typec_port_vbus_toggle(struct pmic_typec_port *pmic_typec_port, bool on) { u32 sm_stat; u32 val; @@ -179,10 +320,49 @@ int qcom_pmic_typec_port_set_vbus(struct pmic_typec_port *pmic_typec_port, bool return 0; } -int qcom_pmic_typec_port_get_cc(struct pmic_typec_port *pmic_typec_port, - enum typec_cc_status *cc1, - enum typec_cc_status *cc2) +static int qcom_pmic_typec_port_get_vbus(struct tcpc_dev *tcpc) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port; + int ret; + + mutex_lock(&pmic_typec_port->vbus_lock); + ret = pmic_typec_port->vbus_enabled || qcom_pmic_typec_port_vbus_detect(pmic_typec_port); + mutex_unlock(&pmic_typec_port->vbus_lock); + + return ret; +} + +static int qcom_pmic_typec_port_set_vbus(struct tcpc_dev *tcpc, bool on, bool sink) +{ + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port; + int ret = 0; + + mutex_lock(&pmic_typec_port->vbus_lock); + if (pmic_typec_port->vbus_enabled == on) + goto done; + + ret = qcom_pmic_typec_port_vbus_toggle(pmic_typec_port, on); + if (ret) + goto done; + + pmic_typec_port->vbus_enabled = on; + tcpm_vbus_change(tcpm->tcpm_port); + +done: + dev_dbg(tcpm->dev, "set_vbus set: %d result %d\n", on, ret); + mutex_unlock(&pmic_typec_port->vbus_lock); + + return ret; +} + +static int qcom_pmic_typec_port_get_cc(struct tcpc_dev *tcpc, + enum typec_cc_status *cc1, + enum typec_cc_status *cc2) { + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port; struct device *dev = pmic_typec_port->dev; unsigned int misc, val; bool attached; @@ -275,9 +455,11 @@ static void qcom_pmic_set_cc_debounce(struct pmic_typec_port *pmic_typec_port) msecs_to_jiffies(2)); } -int qcom_pmic_typec_port_set_cc(struct pmic_typec_port *pmic_typec_port, - enum typec_cc_status cc) +static int qcom_pmic_typec_port_set_cc(struct tcpc_dev *tcpc, + enum typec_cc_status cc) { + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port; struct device *dev = pmic_typec_port->dev; unsigned int mode, currsrc; unsigned int misc; @@ -341,8 +523,17 @@ done: return ret; } -int qcom_pmic_typec_port_set_vconn(struct pmic_typec_port *pmic_typec_port, bool on) +static int qcom_pmic_typec_port_set_polarity(struct tcpc_dev *tcpc, + enum typec_cc_polarity pol) +{ + /* Polarity is set separately by phy-qcom-qmp.c */ + return 0; +} + +static int qcom_pmic_typec_port_set_vconn(struct tcpc_dev *tcpc, bool on) { + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port; struct device *dev = pmic_typec_port->dev; unsigned int orientation, misc, mask, value; unsigned long flags; @@ -377,10 +568,12 @@ done: return ret; } -int qcom_pmic_typec_port_start_toggling(struct pmic_typec_port *pmic_typec_port, - enum typec_port_type port_type, - enum typec_cc_status cc) +static int qcom_pmic_typec_port_start_toggling(struct tcpc_dev *tcpc, + enum typec_port_type port_type, + enum typec_cc_status cc) { + struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc); + struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port; struct device *dev = pmic_typec_port->dev; unsigned int misc; u8 mode = 0; @@ -441,9 +634,10 @@ done: (TYPEC_STATE_MACHINE_CHANGE_INT_EN | TYPEC_VBUS_ERROR_INT_EN | \ TYPEC_DEBOUNCE_DONE_INT_EN) -int qcom_pmic_typec_port_start(struct pmic_typec_port *pmic_typec_port, - struct tcpm_port *tcpm_port) +static int qcom_pmic_typec_port_start(struct pmic_typec *tcpm, + struct tcpm_port *tcpm_port) { + struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port; int i; int mask; int ret; @@ -491,29 +685,30 @@ done: return ret; } -void qcom_pmic_typec_port_stop(struct pmic_typec_port *pmic_typec_port) +static void qcom_pmic_typec_port_stop(struct pmic_typec *tcpm) { + struct pmic_typec_port *pmic_typec_port = tcpm->pmic_typec_port; int i; for (i = 0; i < pmic_typec_port->nr_irqs; i++) disable_irq(pmic_typec_port->irq_data[i].irq); } -struct pmic_typec_port *qcom_pmic_typec_port_alloc(struct device *dev) -{ - return devm_kzalloc(dev, sizeof(struct pmic_typec_port), GFP_KERNEL); -} - int qcom_pmic_typec_port_probe(struct platform_device *pdev, - struct pmic_typec_port *pmic_typec_port, - struct pmic_typec_port_resources *res, + struct pmic_typec *tcpm, + const struct pmic_typec_port_resources *res, struct regmap *regmap, u32 base) { struct device *dev = &pdev->dev; struct pmic_typec_port_irq_data *irq_data; + struct pmic_typec_port *pmic_typec_port; int i, ret, irq; + pmic_typec_port = devm_kzalloc(dev, sizeof(*pmic_typec_port), GFP_KERNEL); + if (!pmic_typec_port) + return -ENOMEM; + if (!res->nr_irqs || res->nr_irqs > PMIC_TYPEC_MAX_IRQS) return -EINVAL; @@ -522,6 +717,8 @@ int qcom_pmic_typec_port_probe(struct platform_device *pdev, if (!irq_data) return -ENOMEM; + mutex_init(&pmic_typec_port->vbus_lock); + pmic_typec_port->vdd_vbus = devm_regulator_get(dev, "vdd-vbus"); if (IS_ERR(pmic_typec_port->vdd_vbus)) return PTR_ERR(pmic_typec_port->vdd_vbus); @@ -556,5 +753,56 @@ int qcom_pmic_typec_port_probe(struct platform_device *pdev, return ret; } + tcpm->pmic_typec_port = pmic_typec_port; + + tcpm->tcpc.get_vbus = qcom_pmic_typec_port_get_vbus; + tcpm->tcpc.set_vbus = qcom_pmic_typec_port_set_vbus; + tcpm->tcpc.set_cc = qcom_pmic_typec_port_set_cc; + tcpm->tcpc.get_cc = qcom_pmic_typec_port_get_cc; + tcpm->tcpc.set_polarity = qcom_pmic_typec_port_set_polarity; + tcpm->tcpc.set_vconn = qcom_pmic_typec_port_set_vconn; + tcpm->tcpc.start_toggling = qcom_pmic_typec_port_start_toggling; + + tcpm->port_start = qcom_pmic_typec_port_start; + tcpm->port_stop = qcom_pmic_typec_port_stop; + return 0; } + +const struct pmic_typec_port_resources pm8150b_port_res = { + .irq_params = { + { + .irq_name = "vpd-detect", + .virq = PMIC_TYPEC_VPD_IRQ, + }, + + { + .irq_name = "cc-state-change", + .virq = PMIC_TYPEC_CC_STATE_IRQ, + }, + { + .irq_name = "vconn-oc", + .virq = PMIC_TYPEC_VCONN_OC_IRQ, + }, + + { + .irq_name = "vbus-change", + .virq = PMIC_TYPEC_VBUS_IRQ, + }, + + { + .irq_name = "attach-detach", + .virq = PMIC_TYPEC_ATTACH_DETACH_IRQ, + }, + { + .irq_name = "legacy-cable-detect", + .virq = PMIC_TYPEC_LEGACY_CABLE_IRQ, + }, + + { + .irq_name = "try-snk-src-detect", + .virq = PMIC_TYPEC_TRY_SNK_SRC_IRQ, + }, + }, + .nr_irqs = 7, +}; diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h index d4d358c680b6b..2ca83a46cf3b5 100644 --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_port.h @@ -3,149 +3,12 @@ * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved. * Copyright (c) 2023, Linaro Ltd. All rights reserved. */ -#ifndef __QCOM_PMIC_TYPEC_H__ -#define __QCOM_PMIC_TYPEC_H__ +#ifndef __QCOM_PMIC_TYPEC_PORT_H__ +#define __QCOM_PMIC_TYPEC_PORT_H__ #include <linux/platform_device.h> #include <linux/usb/tcpm.h> -#define TYPEC_SNK_STATUS_REG 0x06 -#define DETECTED_SNK_TYPE_MASK GENMASK(6, 0) -#define SNK_DAM_MASK GENMASK(6, 4) -#define SNK_DAM_500MA BIT(6) -#define SNK_DAM_1500MA BIT(5) -#define SNK_DAM_3000MA BIT(4) -#define SNK_RP_STD BIT(3) -#define SNK_RP_1P5 BIT(2) -#define SNK_RP_3P0 BIT(1) -#define SNK_RP_SHORT BIT(0) - -#define TYPEC_SRC_STATUS_REG 0x08 -#define DETECTED_SRC_TYPE_MASK GENMASK(4, 0) -#define SRC_HIGH_BATT BIT(5) -#define SRC_DEBUG_ACCESS BIT(4) -#define SRC_RD_OPEN BIT(3) -#define SRC_RD_RA_VCONN BIT(2) -#define SRC_RA_OPEN BIT(1) -#define AUDIO_ACCESS_RA_RA BIT(0) - -#define TYPEC_STATE_MACHINE_STATUS_REG 0x09 -#define TYPEC_ATTACH_DETACH_STATE BIT(5) - -#define TYPEC_SM_STATUS_REG 0x0A -#define TYPEC_SM_VBUS_VSAFE5V BIT(5) -#define TYPEC_SM_VBUS_VSAFE0V BIT(6) -#define TYPEC_SM_USBIN_LT_LV BIT(7) - -#define TYPEC_MISC_STATUS_REG 0x0B -#define TYPEC_WATER_DETECTION_STATUS BIT(7) -#define SNK_SRC_MODE BIT(6) -#define TYPEC_VBUS_DETECT BIT(5) -#define TYPEC_VBUS_ERROR_STATUS BIT(4) -#define TYPEC_DEBOUNCE_DONE BIT(3) -#define CC_ORIENTATION BIT(1) -#define CC_ATTACHED BIT(0) - -#define LEGACY_CABLE_STATUS_REG 0x0D -#define TYPEC_LEGACY_CABLE_STATUS BIT(1) -#define TYPEC_NONCOMP_LEGACY_CABLE_STATUS BIT(0) - -#define TYPEC_U_USB_STATUS_REG 0x0F -#define U_USB_GROUND_NOVBUS BIT(6) -#define U_USB_GROUND BIT(4) -#define U_USB_FMB1 BIT(3) -#define U_USB_FLOAT1 BIT(2) -#define U_USB_FMB2 BIT(1) -#define U_USB_FLOAT2 BIT(0) - -#define TYPEC_MODE_CFG_REG 0x44 -#define TYPEC_TRY_MODE_MASK GENMASK(4, 3) -#define EN_TRY_SNK BIT(4) -#define EN_TRY_SRC BIT(3) -#define TYPEC_POWER_ROLE_CMD_MASK GENMASK(2, 0) -#define EN_SRC_ONLY BIT(2) -#define EN_SNK_ONLY BIT(1) -#define TYPEC_DISABLE_CMD BIT(0) - -#define TYPEC_VCONN_CONTROL_REG 0x46 -#define VCONN_EN_ORIENTATION BIT(2) -#define VCONN_EN_VALUE BIT(1) -#define VCONN_EN_SRC BIT(0) - -#define TYPEC_CCOUT_CONTROL_REG 0x48 -#define TYPEC_CCOUT_BUFFER_EN BIT(2) -#define TYPEC_CCOUT_VALUE BIT(1) -#define TYPEC_CCOUT_SRC BIT(0) - -#define DEBUG_ACCESS_SRC_CFG_REG 0x4C -#define EN_UNORIENTED_DEBUG_ACCESS_SRC BIT(0) - -#define TYPE_C_CRUDE_SENSOR_CFG_REG 0x4e -#define EN_SRC_CRUDE_SENSOR BIT(1) -#define EN_SNK_CRUDE_SENSOR BIT(0) - -#define TYPEC_EXIT_STATE_CFG_REG 0x50 -#define BYPASS_VSAFE0V_DURING_ROLE_SWAP BIT(3) -#define SEL_SRC_UPPER_REF BIT(2) -#define USE_TPD_FOR_EXITING_ATTACHSRC BIT(1) -#define EXIT_SNK_BASED_ON_CC BIT(0) - -#define TYPEC_CURRSRC_CFG_REG 0x52 -#define TYPEC_SRC_RP_SEL_330UA BIT(1) -#define TYPEC_SRC_RP_SEL_180UA BIT(0) -#define TYPEC_SRC_RP_SEL_80UA 0 -#define TYPEC_SRC_RP_SEL_MASK GENMASK(1, 0) - -#define TYPEC_INTERRUPT_EN_CFG_1_REG 0x5E -#define TYPEC_LEGACY_CABLE_INT_EN BIT(7) -#define TYPEC_NONCOMPLIANT_LEGACY_CABLE_INT_EN BIT(6) -#define TYPEC_TRYSOURCE_DETECT_INT_EN BIT(5) -#define TYPEC_TRYSINK_DETECT_INT_EN BIT(4) -#define TYPEC_CCOUT_DETACH_INT_EN BIT(3) -#define TYPEC_CCOUT_ATTACH_INT_EN BIT(2) -#define TYPEC_VBUS_DEASSERT_INT_EN BIT(1) -#define TYPEC_VBUS_ASSERT_INT_EN BIT(0) - -#define TYPEC_INTERRUPT_EN_CFG_2_REG 0x60 -#define TYPEC_SRC_BATT_HPWR_INT_EN BIT(6) -#define MICRO_USB_STATE_CHANGE_INT_EN BIT(5) -#define TYPEC_STATE_MACHINE_CHANGE_INT_EN BIT(4) -#define TYPEC_DEBUG_ACCESS_DETECT_INT_EN BIT(3) -#define TYPEC_WATER_DETECTION_INT_EN BIT(2) -#define TYPEC_VBUS_ERROR_INT_EN BIT(1) -#define TYPEC_DEBOUNCE_DONE_INT_EN BIT(0) - -#define TYPEC_DEBOUNCE_OPTION_REG 0x62 -#define REDUCE_TCCDEBOUNCE_TO_2MS BIT(2) - -#define TYPE_C_SBU_CFG_REG 0x6A -#define SEL_SBU1_ISRC_VAL 0x04 -#define SEL_SBU2_ISRC_VAL 0x01 - -#define TYPEC_U_USB_CFG_REG 0x70 -#define EN_MICRO_USB_FACTORY_MODE BIT(1) -#define EN_MICRO_USB_MODE BIT(0) - -#define TYPEC_PMI632_U_USB_WATER_PROTECTION_CFG_REG 0x72 - -#define TYPEC_U_USB_WATER_PROTECTION_CFG_REG 0x73 -#define EN_MICRO_USB_WATER_PROTECTION BIT(4) -#define MICRO_USB_DETECTION_ON_TIME_CFG_MASK GENMASK(3, 2) -#define MICRO_USB_DETECTION_PERIOD_CFG_MASK GENMASK(1, 0) - -#define TYPEC_PMI632_MICRO_USB_MODE_REG 0x73 -#define MICRO_USB_MODE_ONLY BIT(0) - -/* Interrupt numbers */ -#define PMIC_TYPEC_OR_RID_IRQ 0x0 -#define PMIC_TYPEC_VPD_IRQ 0x1 -#define PMIC_TYPEC_CC_STATE_IRQ 0x2 -#define PMIC_TYPEC_VCONN_OC_IRQ 0x3 -#define PMIC_TYPEC_VBUS_IRQ 0x4 -#define PMIC_TYPEC_ATTACH_DETACH_IRQ 0x5 -#define PMIC_TYPEC_LEGACY_CABLE_IRQ 0x6 -#define PMIC_TYPEC_TRY_SNK_SRC_IRQ 0x7 - /* Resources */ #define PMIC_TYPEC_MAX_IRQS 0x08 @@ -156,40 +19,17 @@ struct pmic_typec_port_irq_params { struct pmic_typec_port_resources { unsigned int nr_irqs; - struct pmic_typec_port_irq_params irq_params[PMIC_TYPEC_MAX_IRQS]; + const struct pmic_typec_port_irq_params irq_params[PMIC_TYPEC_MAX_IRQS]; }; /* API */ -struct pmic_typec; -struct pmic_typec_port *qcom_pmic_typec_port_alloc(struct device *dev); +extern const struct pmic_typec_port_resources pm8150b_port_res; int qcom_pmic_typec_port_probe(struct platform_device *pdev, - struct pmic_typec_port *pmic_typec_port, - struct pmic_typec_port_resources *res, + struct pmic_typec *tcpm, + const struct pmic_typec_port_resources *res, struct regmap *regmap, u32 base); -int qcom_pmic_typec_port_start(struct pmic_typec_port *pmic_typec_port, - struct tcpm_port *tcpm_port); - -void qcom_pmic_typec_port_stop(struct pmic_typec_port *pmic_typec_port); - -int qcom_pmic_typec_port_get_cc(struct pmic_typec_port *pmic_typec_port, - enum typec_cc_status *cc1, - enum typec_cc_status *cc2); - -int qcom_pmic_typec_port_set_cc(struct pmic_typec_port *pmic_typec_port, - enum typec_cc_status cc); - -int qcom_pmic_typec_port_get_vbus(struct pmic_typec_port *pmic_typec_port); - -int qcom_pmic_typec_port_set_vconn(struct pmic_typec_port *pmic_typec_port, bool on); - -int qcom_pmic_typec_port_start_toggling(struct pmic_typec_port *pmic_typec_port, - enum typec_port_type port_type, - enum typec_cc_status cc); - -int qcom_pmic_typec_port_set_vbus(struct pmic_typec_port *pmic_typec_port, bool on); - #endif /* __QCOM_PMIC_TYPE_C_PORT_H__ */ diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index 0ee3e6e29bb17..c962014bba4e8 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -445,8 +445,11 @@ static int tcpci_set_pd_rx(struct tcpc_dev *tcpc, bool enable) unsigned int reg = 0; int ret; - if (enable) + if (enable) { reg = TCPC_RX_DETECT_SOP | TCPC_RX_DETECT_HARD_RESET; + if (tcpci->data->cable_comm_capable) + reg |= TCPC_RX_DETECT_SOP1; + } ret = regmap_write(tcpci->regmap, TCPC_RX_DETECT, reg); if (ret < 0) return ret; @@ -584,6 +587,23 @@ static int tcpci_pd_transmit(struct tcpc_dev *tcpc, enum tcpm_transmit_type type return 0; } +static bool tcpci_cable_comm_capable(struct tcpc_dev *tcpc) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + + return tcpci->data->cable_comm_capable; +} + +static bool tcpci_attempt_vconn_swap_discovery(struct tcpc_dev *tcpc) +{ + struct tcpci *tcpci = tcpc_to_tcpci(tcpc); + + if (tcpci->data->attempt_vconn_swap_discovery) + return tcpci->data->attempt_vconn_swap_discovery(tcpci, tcpci->data); + + return false; +} + static int tcpci_init(struct tcpc_dev *tcpc) { struct tcpci *tcpci = tcpc_to_tcpci(tcpc); @@ -712,7 +732,7 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci) /* Read complete, clear RX status alert bit */ tcpci_write16(tcpci, TCPC_ALERT, TCPC_ALERT_RX_STATUS); - tcpm_pd_receive(tcpci->port, &msg); + tcpm_pd_receive(tcpci->port, &msg, TCPC_TX_SOP); } if (tcpci->data->vbus_vsafe0v && (status & TCPC_ALERT_EXTENDED_STATUS)) { @@ -793,6 +813,8 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data) tcpci->tcpc.enable_frs = tcpci_enable_frs; tcpci->tcpc.frs_sourcing_vbus = tcpci_frs_sourcing_vbus; tcpci->tcpc.set_partner_usb_comm_capable = tcpci_set_partner_usb_comm_capable; + tcpci->tcpc.cable_comm_capable = tcpci_cable_comm_capable; + tcpci->tcpc.attempt_vconn_swap_discovery = tcpci_attempt_vconn_swap_discovery; if (tcpci->data->check_contaminant) tcpci->tcpc.check_contaminant = tcpci_check_contaminant; @@ -889,6 +911,7 @@ MODULE_DEVICE_TABLE(i2c, tcpci_id); #ifdef CONFIG_OF static const struct of_device_id tcpci_of_match[] = { { .compatible = "nxp,ptn5110", }, + { .compatible = "tcpci", }, {}, }; MODULE_DEVICE_TABLE(of, tcpci_of_match); diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.h b/drivers/usb/typec/tcpm/tcpci_maxim.h index 2c1c4d161b0dc..78ff3b73ee7e3 100644 --- a/drivers/usb/typec/tcpm/tcpci_maxim.h +++ b/drivers/usb/typec/tcpm/tcpci_maxim.h @@ -62,6 +62,7 @@ struct max_tcpci_chip { struct i2c_client *client; struct tcpm_port *port; enum contamiant_state contaminant_state; + bool veto_vconn_swap; }; static inline int max_tcpci_read16(struct max_tcpci_chip *chip, unsigned int reg, u16 *val) diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c index 7fb966fd639b3..eec3bcec119c1 100644 --- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c +++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c @@ -128,6 +128,7 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status) u8 count, frame_type, rx_buf[TCPC_RECEIVE_BUFFER_LEN]; int ret, payload_index; u8 *rx_buf_ptr; + enum tcpm_transmit_type rx_type; /* * READABLE_BYTE_COUNT: Indicates the number of bytes in the RX_BUF_BYTE_x registers @@ -143,10 +144,23 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status) count = rx_buf[TCPC_RECEIVE_BUFFER_COUNT_OFFSET]; frame_type = rx_buf[TCPC_RECEIVE_BUFFER_FRAME_TYPE_OFFSET]; - if (count == 0 || frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP) { + switch (frame_type) { + case TCPC_RX_BUF_FRAME_TYPE_SOP1: + rx_type = TCPC_TX_SOP_PRIME; + break; + case TCPC_RX_BUF_FRAME_TYPE_SOP: + rx_type = TCPC_TX_SOP; + break; + default: + rx_type = TCPC_TX_SOP; + break; + } + + if (count == 0 || (frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP && + frame_type != TCPC_RX_BUF_FRAME_TYPE_SOP1)) { max_tcpci_write16(chip, TCPC_ALERT, TCPC_ALERT_RX_STATUS); dev_err(chip->dev, "%s\n", count == 0 ? "error: count is 0" : - "error frame_type is not SOP"); + "error frame_type is not SOP/SOP'"); return; } @@ -183,7 +197,7 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status) if (ret < 0) return; - tcpm_pd_receive(chip->port, &msg); + tcpm_pd_receive(chip->port, &msg, rx_type); } static int max_tcpci_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, bool source, bool sink) @@ -309,8 +323,10 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status) if (ret < 0) return ret; - if (reg_status & TCPC_FAULT_STATUS_VCONN_OC) + if (reg_status & TCPC_FAULT_STATUS_VCONN_OC) { + chip->veto_vconn_swap = true; tcpm_port_error_recovery(chip->port); + } } if (status & TCPC_ALERT_EXTND) { @@ -444,6 +460,18 @@ static void max_tcpci_check_contaminant(struct tcpci *tcpci, struct tcpci_data * tcpm_port_clean(chip->port); } +static bool max_tcpci_attempt_vconn_swap_discovery(struct tcpci *tcpci, struct tcpci_data *tdata) +{ + struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata); + + if (chip->veto_vconn_swap) { + chip->veto_vconn_swap = false; + return false; + } + + return true; +} + static int max_tcpci_probe(struct i2c_client *client) { int ret; @@ -478,6 +506,8 @@ static int max_tcpci_probe(struct i2c_client *client) chip->data.vbus_vsafe0v = true; chip->data.set_partner_usb_comm_capable = max_tcpci_set_partner_usb_comm_capable; chip->data.check_contaminant = max_tcpci_check_contaminant; + chip->data.cable_comm_capable = true; + chip->data.attempt_vconn_swap_discovery = max_tcpci_attempt_vconn_swap_discovery; max_tcpci_init_regs(chip); chip->tcpci = tcpci_register_port(chip->dev, &chip->data); diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 0965972310275..ae2b6c94482d5 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -108,6 +108,7 @@ S(VCONN_SWAP_WAIT_FOR_VCONN), \ S(VCONN_SWAP_TURN_ON_VCONN), \ S(VCONN_SWAP_TURN_OFF_VCONN), \ + S(VCONN_SWAP_SEND_SOFT_RESET), \ \ S(FR_SWAP_SEND), \ S(FR_SWAP_SEND_TIMEOUT), \ @@ -145,7 +146,9 @@ S(PORT_RESET_WAIT_OFF), \ \ S(AMS_START), \ - S(CHUNK_NOT_SUPP) + S(CHUNK_NOT_SUPP), \ + \ + S(SRC_VDM_IDENTITY_REQUEST) #define FOREACH_AMS(S) \ S(NONE_AMS), \ @@ -327,6 +330,12 @@ struct tcpm_port { struct typec_partner_desc partner_desc; struct typec_partner *partner; + struct usb_pd_identity cable_ident; + struct typec_cable_desc cable_desc; + struct typec_cable *cable; + struct typec_plug_desc plug_prime_desc; + struct typec_plug *plug_prime; + enum typec_cc_status cc_req; enum typec_cc_status src_rp; /* work only if pd_supported == false */ @@ -468,7 +477,9 @@ struct tcpm_port { /* Alternate mode data */ struct pd_mode_data mode_data; + struct pd_mode_data mode_data_prime; struct typec_altmode *partner_altmode[ALTMODE_DISCOVERY_MAX]; + struct typec_altmode *plug_prime_altmode[ALTMODE_DISCOVERY_MAX]; struct typec_altmode *port_altmode[ALTMODE_DISCOVERY_MAX]; /* Deadline in jiffies to exit src_try_wait state */ @@ -505,6 +516,41 @@ struct tcpm_port { * transitions. */ bool potential_contaminant; + + /* SOP* Related Fields */ + /* + * Flag to determine if SOP' Discover Identity is available. The flag + * is set if Discover Identity on SOP' does not immediately follow + * Discover Identity on SOP. + */ + bool send_discover_prime; + /* + * tx_sop_type determines which SOP* a message is being sent on. + * For messages that are queued and not sent immediately such as in + * tcpm_queue_message or messages that send after state changes, + * the tx_sop_type is set accordingly. + */ + enum tcpm_transmit_type tx_sop_type; + /* + * Prior to discovering the port partner's Specification Revision, the + * Vconn source and cable plug will use the lower of their two revisions. + * + * When the port partner's Specification Revision is discovered, the following + * rules are put in place. + * 1. If the cable revision (1) is lower than the revision negotiated + * between the port and partner (2), the port and partner will communicate + * on revision (2), but the port and cable will communicate on revision (1). + * 2. If the cable revision (1) is higher than the revision negotiated + * between the port and partner (2), the port and partner will communicate + * on revision (2), and the port and cable will communicate on revision (2) + * as well. + */ + unsigned int negotiated_rev_prime; + /* + * Each SOP* type must maintain their own tx and rx message IDs + */ + unsigned int message_id_prime; + unsigned int rx_msgid_prime; #ifdef CONFIG_DEBUG_FS struct dentry *dentry; struct mutex logbuffer_lock; /* log buffer access lock */ @@ -518,6 +564,7 @@ struct pd_rx_event { struct kthread_work work; struct tcpm_port *port; struct pd_message msg; + enum tcpm_transmit_type rx_sop_type; }; static const char * const pd_rev[] = { @@ -893,19 +940,30 @@ static void tcpm_ams_finish(struct tcpm_port *port) } static int tcpm_pd_transmit(struct tcpm_port *port, - enum tcpm_transmit_type type, + enum tcpm_transmit_type tx_sop_type, const struct pd_message *msg) { unsigned long timeout; int ret; + unsigned int negotiated_rev; + + switch (tx_sop_type) { + case TCPC_TX_SOP_PRIME: + negotiated_rev = port->negotiated_rev_prime; + break; + case TCPC_TX_SOP: + default: + negotiated_rev = port->negotiated_rev; + break; + } if (msg) tcpm_log(port, "PD TX, header: %#x", le16_to_cpu(msg->header)); else - tcpm_log(port, "PD TX, type: %#x", type); + tcpm_log(port, "PD TX, type: %#x", tx_sop_type); reinit_completion(&port->tx_complete); - ret = port->tcpc->pd_transmit(port->tcpc, type, msg, port->negotiated_rev); + ret = port->tcpc->pd_transmit(port->tcpc, tx_sop_type, msg, negotiated_rev); if (ret < 0) return ret; @@ -918,7 +976,17 @@ static int tcpm_pd_transmit(struct tcpm_port *port, switch (port->tx_status) { case TCPC_TX_SUCCESS: - port->message_id = (port->message_id + 1) & PD_HEADER_ID_MASK; + switch (tx_sop_type) { + case TCPC_TX_SOP_PRIME: + port->message_id_prime = (port->message_id_prime + 1) & + PD_HEADER_ID_MASK; + break; + case TCPC_TX_SOP: + default: + port->message_id = (port->message_id + 1) & + PD_HEADER_ID_MASK; + break; + } /* * USB PD rev 2.0, 8.3.2.2.1: * USB PD rev 3.0, 8.3.2.1.3: @@ -1099,6 +1167,12 @@ static int tcpm_set_roles(struct tcpm_port *port, bool attached, if (ret < 0) return ret; + if (port->tcpc->set_orientation) { + ret = port->tcpc->set_orientation(port->tcpc, orientation); + if (ret < 0) + return ret; + } + port->pwr_role = role; port->data_role = data; typec_set_data_role(port->typec_port, data); @@ -1456,7 +1530,7 @@ static int tcpm_ams_start(struct tcpm_port *port, enum tcpm_ams ams) * VDM/VDO handling functions */ static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header, - const u32 *data, int cnt) + const u32 *data, int cnt, enum tcpm_transmit_type tx_sop_type) { u32 vdo_hdr = port->vdo_data[0]; @@ -1464,7 +1538,10 @@ static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header, /* If is sending discover_identity, handle received message first */ if (PD_VDO_SVDM(vdo_hdr) && PD_VDO_CMD(vdo_hdr) == CMD_DISCOVER_IDENT) { - port->send_discover = true; + if (tx_sop_type == TCPC_TX_SOP_PRIME) + port->send_discover_prime = true; + else + port->send_discover = true; mod_send_discover_delayed_work(port, SEND_DISCOVER_RETRY_MS); } else { /* Make sure we are not still processing a previous VDM packet */ @@ -1479,14 +1556,16 @@ static void tcpm_queue_vdm(struct tcpm_port *port, const u32 header, port->vdm_state = VDM_STATE_READY; port->vdm_sm_running = true; + port->tx_sop_type = tx_sop_type; + mod_vdm_delayed_work(port, 0); } static void tcpm_queue_vdm_unlocked(struct tcpm_port *port, const u32 header, - const u32 *data, int cnt) + const u32 *data, int cnt, enum tcpm_transmit_type tx_sop_type) { mutex_lock(&port->lock); - tcpm_queue_vdm(port, header, data, cnt); + tcpm_queue_vdm(port, header, data, cnt, TCPC_TX_SOP); mutex_unlock(&port->lock); } @@ -1508,9 +1587,68 @@ static void svdm_consume_identity(struct tcpm_port *port, const u32 *p, int cnt) PD_PRODUCT_PID(product), product & 0xffff); } -static bool svdm_consume_svids(struct tcpm_port *port, const u32 *p, int cnt) +static void svdm_consume_identity_sop_prime(struct tcpm_port *port, const u32 *p, int cnt) { - struct pd_mode_data *pmdata = &port->mode_data; + u32 idh = p[VDO_INDEX_IDH]; + u32 product = p[VDO_INDEX_PRODUCT]; + int svdm_version; + + /* + * Attempt to consume identity only if cable currently is not set + */ + if (!IS_ERR_OR_NULL(port->cable)) + goto register_plug; + + /* Reset cable identity */ + memset(&port->cable_ident, 0, sizeof(port->cable_ident)); + + /* Fill out id header, cert, product, cable VDO 1 */ + port->cable_ident.id_header = idh; + port->cable_ident.cert_stat = p[VDO_INDEX_CSTAT]; + port->cable_ident.product = product; + port->cable_ident.vdo[0] = p[VDO_INDEX_CABLE_1]; + + /* Fill out cable desc, infer svdm_version from pd revision */ + port->cable_desc.type = (enum typec_plug_type) (VDO_TYPEC_CABLE_TYPE(p[VDO_INDEX_CABLE_1]) + + USB_PLUG_TYPE_A); + port->cable_desc.active = PD_IDH_PTYPE(idh) == IDH_PTYPE_ACABLE ? 1 : 0; + /* Log PD Revision and additional cable VDO from negotiated revision */ + switch (port->negotiated_rev_prime) { + case PD_REV30: + port->cable_desc.pd_revision = 0x0300; + if (port->cable_desc.active) + port->cable_ident.vdo[1] = p[VDO_INDEX_CABLE_2]; + break; + case PD_REV20: + port->cable_desc.pd_revision = 0x0200; + break; + default: + port->cable_desc.pd_revision = 0x0200; + break; + } + port->cable_desc.identity = &port->cable_ident; + /* Register Cable, set identity and svdm_version */ + port->cable = typec_register_cable(port->typec_port, &port->cable_desc); + if (IS_ERR_OR_NULL(port->cable)) + return; + typec_cable_set_identity(port->cable); + /* Get SVDM version */ + svdm_version = PD_VDO_SVDM_VER(p[VDO_INDEX_HDR]); + typec_cable_set_svdm_version(port->cable, svdm_version); + +register_plug: + if (IS_ERR_OR_NULL(port->plug_prime)) { + port->plug_prime_desc.index = TYPEC_PLUG_SOP_P; + port->plug_prime = typec_register_plug(port->cable, + &port->plug_prime_desc); + } +} + +static bool svdm_consume_svids(struct tcpm_port *port, const u32 *p, int cnt, + enum tcpm_transmit_type rx_sop_type) +{ + struct pd_mode_data *pmdata = rx_sop_type == TCPC_TX_SOP_PRIME ? + &port->mode_data_prime : &port->mode_data; int i; for (i = 1; i < cnt; i++) { @@ -1556,14 +1694,29 @@ abort: return false; } -static void svdm_consume_modes(struct tcpm_port *port, const u32 *p, int cnt) +static void svdm_consume_modes(struct tcpm_port *port, const u32 *p, int cnt, + enum tcpm_transmit_type rx_sop_type) { struct pd_mode_data *pmdata = &port->mode_data; struct typec_altmode_desc *paltmode; int i; - if (pmdata->altmodes >= ARRAY_SIZE(port->partner_altmode)) { - /* Already logged in svdm_consume_svids() */ + switch (rx_sop_type) { + case TCPC_TX_SOP_PRIME: + pmdata = &port->mode_data_prime; + if (pmdata->altmodes >= ARRAY_SIZE(port->plug_prime_altmode)) { + /* Already logged in svdm_consume_svids() */ + return; + } + break; + case TCPC_TX_SOP: + pmdata = &port->mode_data; + if (pmdata->altmodes >= ARRAY_SIZE(port->partner_altmode)) { + /* Already logged in svdm_consume_svids() */ + return; + } + break; + default: return; } @@ -1601,20 +1754,129 @@ static void tcpm_register_partner_altmodes(struct tcpm_port *port) } } +static void tcpm_register_plug_altmodes(struct tcpm_port *port) +{ + struct pd_mode_data *modep = &port->mode_data_prime; + struct typec_altmode *altmode; + int i; + + typec_plug_set_num_altmodes(port->plug_prime, modep->altmodes); + + for (i = 0; i < modep->altmodes; i++) { + altmode = typec_plug_register_altmode(port->plug_prime, + &modep->altmode_desc[i]); + if (IS_ERR(altmode)) { + tcpm_log(port, "Failed to register plug SVID 0x%04x", + modep->altmode_desc[i].svid); + altmode = NULL; + } + port->plug_prime_altmode[i] = altmode; + } +} + #define supports_modal(port) PD_IDH_MODAL_SUPP((port)->partner_ident.id_header) +#define supports_modal_cable(port) PD_IDH_MODAL_SUPP((port)->cable_ident.id_header) +#define supports_host(port) PD_IDH_HOST_SUPP((port->partner_ident.id_header)) + +/* + * Helper to determine whether the port is capable of SOP' communication at the + * current point in time. + */ +static bool tcpm_can_communicate_sop_prime(struct tcpm_port *port) +{ + /* Check to see if tcpc supports SOP' communication */ + if (!port->tcpc->cable_comm_capable || !port->tcpc->cable_comm_capable(port->tcpc)) + return false; + /* + * Power Delivery 2.0 Section 6.3.11 + * Before communicating with a Cable Plug a Port Should ensure that it + * is the Vconn Source and that the Cable Plugs are powered by + * performing a Vconn swap if necessary. Since it cannot be guaranteed + * that the present Vconn Source is supplying Vconn, the only means to + * ensure that the Cable Plugs are powered is for a Port wishing to + * communicate with a Cable Plug is to become the Vconn Source. + * + * Power Delivery 3.0 Section 6.3.11 + * Before communicating with a Cable Plug a Port Shall ensure that it + * is the Vconn source. + */ + if (port->vconn_role != TYPEC_SOURCE) + return false; + /* + * Power Delivery 2.0 Section 2.4.4 + * When no Contract or an Implicit Contract is in place the Source can + * communicate with a Cable Plug using SOP' packets in order to discover + * its characteristics. + * + * Power Delivery 3.0 Section 2.4.4 + * When no Contract or an Implicit Contract is in place only the Source + * port that is supplying Vconn is allowed to send packets to a Cable + * Plug and is allowed to respond to packets from the Cable Plug. + */ + if (!port->explicit_contract) + return port->pwr_role == TYPEC_SOURCE; + if (port->negotiated_rev == PD_REV30) + return true; + /* + * Power Delivery 2.0 Section 2.4.4 + * + * When an Explicit Contract is in place the DFP (either the Source or + * the Sink) can communicate with the Cable Plug(s) using SOP’/SOP” + * Packets (see Figure 2-3). + */ + if (port->negotiated_rev == PD_REV20) + return port->data_role == TYPEC_HOST; + return false; +} + +static bool tcpm_attempt_vconn_swap_discovery(struct tcpm_port *port) +{ + if (!port->tcpc->attempt_vconn_swap_discovery) + return false; + + /* Port is already source, no need to perform swap */ + if (port->vconn_role == TYPEC_SOURCE) + return false; + + /* + * Partner needs to support Alternate Modes with modal support. If + * partner is also capable of being a USB Host, it could be a device + * that supports Alternate Modes as the DFP. + */ + if (!supports_modal(port) || supports_host(port)) + return false; + + if ((port->negotiated_rev == PD_REV20 && port->data_role == TYPEC_HOST) || + port->negotiated_rev == PD_REV30) + return port->tcpc->attempt_vconn_swap_discovery(port->tcpc); + + return false; +} + + +static bool tcpm_cable_vdm_supported(struct tcpm_port *port) +{ + return !IS_ERR_OR_NULL(port->cable) && + typec_cable_is_active(port->cable) && + supports_modal_cable(port) && + tcpm_can_communicate_sop_prime(port); +} static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev, const u32 *p, int cnt, u32 *response, - enum adev_actions *adev_action) + enum adev_actions *adev_action, + enum tcpm_transmit_type rx_sop_type, + enum tcpm_transmit_type *response_tx_sop_type) { struct typec_port *typec = port->typec_port; - struct typec_altmode *pdev; - struct pd_mode_data *modep; + struct typec_altmode *pdev, *pdev_prime; + struct pd_mode_data *modep, *modep_prime; int svdm_version; int rlen = 0; int cmd_type; int cmd; int i; + int ret; cmd_type = PD_VDO_CMDT(p[0]); cmd = PD_VDO_CMD(p[0]); @@ -1622,17 +1884,54 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev, tcpm_log(port, "Rx VDM cmd 0x%x type %d cmd %d len %d", p[0], cmd_type, cmd, cnt); - modep = &port->mode_data; - - pdev = typec_match_altmode(port->partner_altmode, ALTMODE_DISCOVERY_MAX, - PD_VDO_VID(p[0]), PD_VDO_OPOS(p[0])); - - svdm_version = typec_get_negotiated_svdm_version(typec); - if (svdm_version < 0) - return 0; + switch (rx_sop_type) { + case TCPC_TX_SOP_PRIME: + modep_prime = &port->mode_data_prime; + pdev_prime = typec_match_altmode(port->plug_prime_altmode, + ALTMODE_DISCOVERY_MAX, + PD_VDO_VID(p[0]), + PD_VDO_OPOS(p[0])); + svdm_version = typec_get_cable_svdm_version(typec); + /* + * Update SVDM version if cable was discovered before port partner. + */ + if (!IS_ERR_OR_NULL(port->cable) && + PD_VDO_SVDM_VER(p[0]) < svdm_version) + typec_cable_set_svdm_version(port->cable, svdm_version); + break; + case TCPC_TX_SOP: + modep = &port->mode_data; + pdev = typec_match_altmode(port->partner_altmode, + ALTMODE_DISCOVERY_MAX, + PD_VDO_VID(p[0]), + PD_VDO_OPOS(p[0])); + svdm_version = typec_get_negotiated_svdm_version(typec); + if (svdm_version < 0) + return 0; + break; + default: + modep = &port->mode_data; + pdev = typec_match_altmode(port->partner_altmode, + ALTMODE_DISCOVERY_MAX, + PD_VDO_VID(p[0]), + PD_VDO_OPOS(p[0])); + svdm_version = typec_get_negotiated_svdm_version(typec); + if (svdm_version < 0) + return 0; + break; + } switch (cmd_type) { case CMDT_INIT: + /* + * Only the port or port partner is allowed to initialize SVDM + * commands over SOP'. In case the port partner initializes a + * sequence when it is not allowed to send SOP' messages, drop + * the message should the TCPM port try to process it. + */ + if (rx_sop_type == TCPC_TX_SOP_PRIME) + return 0; + switch (cmd) { case CMD_DISCOVER_IDENT: if (PD_VDO_VID(p[0]) != USB_SID_PD) @@ -1699,55 +1998,186 @@ static int tcpm_pd_svdm(struct tcpm_port *port, struct typec_altmode *adev, (VDO_SVDM_VERS(typec_get_negotiated_svdm_version(typec))); break; case CMDT_RSP_ACK: - /* silently drop message if we are not connected */ - if (IS_ERR_OR_NULL(port->partner)) + /* + * Silently drop message if we are not connected, but can process + * if SOP' Discover Identity prior to explicit contract. + */ + if (IS_ERR_OR_NULL(port->partner) && + !(rx_sop_type == TCPC_TX_SOP_PRIME && cmd == CMD_DISCOVER_IDENT)) break; tcpm_ams_finish(port); switch (cmd) { + /* + * SVDM Command Flow for SOP and SOP': + * SOP Discover Identity + * SOP' Discover Identity + * SOP Discover SVIDs + * Discover Modes + * (Active Cables) + * SOP' Discover SVIDs + * Discover Modes + * + * Perform Discover SOP' if the port can communicate with cable + * plug. + */ case CMD_DISCOVER_IDENT: - if (PD_VDO_SVDM_VER(p[0]) < svdm_version) - typec_partner_set_svdm_version(port->partner, - PD_VDO_SVDM_VER(p[0])); - /* 6.4.4.3.1 */ - svdm_consume_identity(port, p, cnt); - response[0] = VDO(USB_SID_PD, 1, typec_get_negotiated_svdm_version(typec), - CMD_DISCOVER_SVID); - rlen = 1; + switch (rx_sop_type) { + case TCPC_TX_SOP: + if (PD_VDO_SVDM_VER(p[0]) < svdm_version) { + typec_partner_set_svdm_version(port->partner, + PD_VDO_SVDM_VER(p[0])); + /* If cable is discovered before partner, downgrade svdm */ + if (!IS_ERR_OR_NULL(port->cable) && + (typec_get_cable_svdm_version(port->typec_port) > + svdm_version)) + typec_cable_set_svdm_version(port->cable, + svdm_version); + } + /* 6.4.4.3.1 */ + svdm_consume_identity(port, p, cnt); + /* Attempt Vconn swap, delay SOP' discovery if necessary */ + if (tcpm_attempt_vconn_swap_discovery(port)) { + port->send_discover_prime = true; + port->upcoming_state = VCONN_SWAP_SEND; + ret = tcpm_ams_start(port, VCONN_SWAP); + if (!ret) + return 0; + /* Cannot perform Vconn swap */ + port->upcoming_state = INVALID_STATE; + port->send_discover_prime = false; + } + + /* + * Attempt Discover Identity on SOP' if the + * cable was not discovered previously, and use + * the SVDM version of the partner to probe. + */ + if (IS_ERR_OR_NULL(port->cable) && + tcpm_can_communicate_sop_prime(port)) { + *response_tx_sop_type = TCPC_TX_SOP_PRIME; + port->send_discover_prime = true; + response[0] = VDO(USB_SID_PD, 1, + typec_get_negotiated_svdm_version(typec), + CMD_DISCOVER_IDENT); + rlen = 1; + } else { + *response_tx_sop_type = TCPC_TX_SOP; + response[0] = VDO(USB_SID_PD, 1, + typec_get_negotiated_svdm_version(typec), + CMD_DISCOVER_SVID); + rlen = 1; + } + break; + case TCPC_TX_SOP_PRIME: + /* + * svdm_consume_identity_sop_prime will determine + * the svdm_version for the cable moving forward. + */ + svdm_consume_identity_sop_prime(port, p, cnt); + + /* + * If received in SRC_VDM_IDENTITY_REQUEST, continue + * to SRC_SEND_CAPABILITIES + */ + if (port->state == SRC_VDM_IDENTITY_REQUEST) { + tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0); + return 0; + } + + *response_tx_sop_type = TCPC_TX_SOP; + response[0] = VDO(USB_SID_PD, 1, + typec_get_negotiated_svdm_version(typec), + CMD_DISCOVER_SVID); + rlen = 1; + break; + default: + return 0; + } break; case CMD_DISCOVER_SVID: + *response_tx_sop_type = rx_sop_type; /* 6.4.4.3.2 */ - if (svdm_consume_svids(port, p, cnt)) { + if (svdm_consume_svids(port, p, cnt, rx_sop_type)) { response[0] = VDO(USB_SID_PD, 1, svdm_version, CMD_DISCOVER_SVID); rlen = 1; - } else if (modep->nsvids && supports_modal(port)) { - response[0] = VDO(modep->svids[0], 1, svdm_version, - CMD_DISCOVER_MODES); - rlen = 1; + } else { + if (rx_sop_type == TCPC_TX_SOP) { + if (modep->nsvids && supports_modal(port)) { + response[0] = VDO(modep->svids[0], 1, svdm_version, + CMD_DISCOVER_MODES); + rlen = 1; + } + } else if (rx_sop_type == TCPC_TX_SOP_PRIME) { + if (modep_prime->nsvids) { + response[0] = VDO(modep_prime->svids[0], 1, + svdm_version, CMD_DISCOVER_MODES); + rlen = 1; + } + } } break; case CMD_DISCOVER_MODES: - /* 6.4.4.3.3 */ - svdm_consume_modes(port, p, cnt); - modep->svid_index++; - if (modep->svid_index < modep->nsvids) { - u16 svid = modep->svids[modep->svid_index]; - response[0] = VDO(svid, 1, svdm_version, CMD_DISCOVER_MODES); - rlen = 1; - } else { - tcpm_register_partner_altmodes(port); + if (rx_sop_type == TCPC_TX_SOP) { + /* 6.4.4.3.3 */ + svdm_consume_modes(port, p, cnt, rx_sop_type); + modep->svid_index++; + if (modep->svid_index < modep->nsvids) { + u16 svid = modep->svids[modep->svid_index]; + *response_tx_sop_type = TCPC_TX_SOP; + response[0] = VDO(svid, 1, svdm_version, + CMD_DISCOVER_MODES); + rlen = 1; + } else if (tcpm_cable_vdm_supported(port)) { + *response_tx_sop_type = TCPC_TX_SOP_PRIME; + response[0] = VDO(USB_SID_PD, 1, + typec_get_cable_svdm_version(typec), + CMD_DISCOVER_SVID); + rlen = 1; + } else { + tcpm_register_partner_altmodes(port); + } + } else if (rx_sop_type == TCPC_TX_SOP_PRIME) { + /* 6.4.4.3.3 */ + svdm_consume_modes(port, p, cnt, rx_sop_type); + modep_prime->svid_index++; + if (modep_prime->svid_index < modep_prime->nsvids) { + u16 svid = modep_prime->svids[modep_prime->svid_index]; + *response_tx_sop_type = TCPC_TX_SOP_PRIME; + response[0] = VDO(svid, 1, + typec_get_cable_svdm_version(typec), + CMD_DISCOVER_MODES); + rlen = 1; + } else { + tcpm_register_plug_altmodes(port); + tcpm_register_partner_altmodes(port); + } } break; case CMD_ENTER_MODE: - if (adev && pdev) - *adev_action = ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL; + *response_tx_sop_type = rx_sop_type; + if (rx_sop_type == TCPC_TX_SOP) { + if (adev && pdev) { + typec_altmode_update_active(pdev, true); + *adev_action = ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL; + } + } else if (rx_sop_type == TCPC_TX_SOP_PRIME) { + if (adev && pdev_prime) { + typec_altmode_update_active(pdev_prime, true); + *adev_action = ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL; + } + } return 0; case CMD_EXIT_MODE: - if (adev && pdev) { - /* Back to USB Operation */ - *adev_action = ADEV_NOTIFY_USB_AND_QUEUE_VDM; - return 0; + *response_tx_sop_type = rx_sop_type; + if (rx_sop_type == TCPC_TX_SOP) { + if (adev && pdev) { + typec_altmode_update_active(pdev, false); + /* Back to USB Operation */ + *adev_action = ADEV_NOTIFY_USB_AND_QUEUE_VDM; + return 0; + } } break; case VDO_CMD_VENDOR(0) ... VDO_CMD_VENDOR(15): @@ -1800,13 +2230,15 @@ static void tcpm_pd_handle_msg(struct tcpm_port *port, enum tcpm_ams ams); static void tcpm_handle_vdm_request(struct tcpm_port *port, - const __le32 *payload, int cnt) + const __le32 *payload, int cnt, + enum tcpm_transmit_type rx_sop_type) { enum adev_actions adev_action = ADEV_NONE; struct typec_altmode *adev; u32 p[PD_MAX_PAYLOAD]; u32 response[8] = { }; int i, rlen = 0; + enum tcpm_transmit_type response_tx_sop_type = TCPC_TX_SOP; for (i = 0; i < cnt; i++) p[i] = le32_to_cpu(payload[i]); @@ -1841,7 +2273,8 @@ static void tcpm_handle_vdm_request(struct tcpm_port *port, * - We will send NAK and the flag will be cleared in the state machine. */ port->vdm_sm_running = true; - rlen = tcpm_pd_svdm(port, adev, p, cnt, response, &adev_action); + rlen = tcpm_pd_svdm(port, adev, p, cnt, response, &adev_action, + rx_sop_type, &response_tx_sop_type); } else { if (port->negotiated_rev >= PD_REV30) tcpm_pd_handle_msg(port, PD_MSG_CTRL_NOT_SUPP, NONE_AMS); @@ -1877,19 +2310,37 @@ static void tcpm_handle_vdm_request(struct tcpm_port *port, typec_altmode_vdm(adev, p[0], &p[1], cnt); break; case ADEV_QUEUE_VDM: - typec_altmode_vdm(adev, p[0], &p[1], cnt); + if (response_tx_sop_type == TCPC_TX_SOP_PRIME) + typec_cable_altmode_vdm(adev, TYPEC_PLUG_SOP_P, p[0], &p[1], cnt); + else + typec_altmode_vdm(adev, p[0], &p[1], cnt); break; case ADEV_QUEUE_VDM_SEND_EXIT_MODE_ON_FAIL: - if (typec_altmode_vdm(adev, p[0], &p[1], cnt)) { - int svdm_version = typec_get_negotiated_svdm_version( - port->typec_port); - if (svdm_version < 0) - break; - - response[0] = VDO(adev->svid, 1, svdm_version, - CMD_EXIT_MODE); - response[0] |= VDO_OPOS(adev->mode); - rlen = 1; + if (response_tx_sop_type == TCPC_TX_SOP_PRIME) { + if (typec_cable_altmode_vdm(adev, TYPEC_PLUG_SOP_P, + p[0], &p[1], cnt)) { + int svdm_version = typec_get_cable_svdm_version( + port->typec_port); + if (svdm_version < 0) + break; + + response[0] = VDO(adev->svid, 1, svdm_version, + CMD_EXIT_MODE); + response[0] |= VDO_OPOS(adev->mode); + rlen = 1; + } + } else { + if (typec_altmode_vdm(adev, p[0], &p[1], cnt)) { + int svdm_version = typec_get_negotiated_svdm_version( + port->typec_port); + if (svdm_version < 0) + break; + + response[0] = VDO(adev->svid, 1, svdm_version, + CMD_EXIT_MODE); + response[0] |= VDO_OPOS(adev->mode); + rlen = 1; + } } break; case ADEV_ATTENTION: @@ -1909,19 +2360,38 @@ static void tcpm_handle_vdm_request(struct tcpm_port *port, mutex_lock(&port->lock); if (rlen > 0) - tcpm_queue_vdm(port, response[0], &response[1], rlen - 1); + tcpm_queue_vdm(port, response[0], &response[1], rlen - 1, response_tx_sop_type); else port->vdm_sm_running = false; } static void tcpm_send_vdm(struct tcpm_port *port, u32 vid, int cmd, - const u32 *data, int count) + const u32 *data, int count, enum tcpm_transmit_type tx_sop_type) { - int svdm_version = typec_get_negotiated_svdm_version(port->typec_port); + int svdm_version; u32 header; - if (svdm_version < 0) - return; + switch (tx_sop_type) { + case TCPC_TX_SOP_PRIME: + /* + * If the port partner is discovered, then the port partner's + * SVDM Version will be returned + */ + svdm_version = typec_get_cable_svdm_version(port->typec_port); + if (svdm_version < 0) + svdm_version = SVDM_VER_MAX; + break; + case TCPC_TX_SOP: + svdm_version = typec_get_negotiated_svdm_version(port->typec_port); + if (svdm_version < 0) + return; + break; + default: + svdm_version = typec_get_negotiated_svdm_version(port->typec_port); + if (svdm_version < 0) + return; + break; + } if (WARN_ON(count > VDO_MAX_SIZE - 1)) count = VDO_MAX_SIZE - 1; @@ -1930,7 +2400,7 @@ static void tcpm_send_vdm(struct tcpm_port *port, u32 vid, int cmd, header = VDO(vid, ((vid & USB_SID_PD) == USB_SID_PD) ? 1 : (PD_VDO_CMD(cmd) <= CMD_ATTENTION), svdm_version, cmd); - tcpm_queue_vdm(port, header, data, count); + tcpm_queue_vdm(port, header, data, count, tx_sop_type); } static unsigned int vdm_ready_timeout(u32 vdm_hdr) @@ -1964,6 +2434,7 @@ static void vdm_run_state_machine(struct tcpm_port *port) struct pd_message msg; int i, res = 0; u32 vdo_hdr = port->vdo_data[0]; + u32 response[8] = { }; switch (port->vdm_state) { case VDM_STATE_READY: @@ -1977,7 +2448,8 @@ static void vdm_run_state_machine(struct tcpm_port *port) * if there's traffic or we're not in PDO ready state don't send * a VDM. */ - if (port->state != SRC_READY && port->state != SNK_READY) { + if (port->state != SRC_READY && port->state != SNK_READY && + port->state != SRC_VDM_IDENTITY_REQUEST) { port->vdm_sm_running = false; break; } @@ -1988,7 +2460,17 @@ static void vdm_run_state_machine(struct tcpm_port *port) case CMD_DISCOVER_IDENT: res = tcpm_ams_start(port, DISCOVER_IDENTITY); if (res == 0) { - port->send_discover = false; + switch (port->tx_sop_type) { + case TCPC_TX_SOP_PRIME: + port->send_discover_prime = false; + break; + case TCPC_TX_SOP: + port->send_discover = false; + break; + default: + port->send_discover = false; + break; + } } else if (res == -EAGAIN) { port->vdo_data[0] = 0; mod_send_discover_delayed_work(port, @@ -2044,12 +2526,21 @@ static void vdm_run_state_machine(struct tcpm_port *port) break; case VDM_STATE_ERR_SEND: /* + * When sending Discover Identity to SOP' before establishing an + * explicit contract, do not retry. Instead, weave sending + * Source_Capabilities over SOP and Discover Identity over SOP'. + */ + if (port->state == SRC_VDM_IDENTITY_REQUEST) { + tcpm_ams_finish(port); + port->vdm_state = VDM_STATE_DONE; + tcpm_set_state(port, SRC_SEND_CAPABILITIES, 0); + /* * A partner which does not support USB PD will not reply, * so this is not a fatal error. At the same time, some * devices may not return GoodCRC under some circumstances, * so we need to retry. */ - if (port->vdm_retries < 3) { + } else if (port->vdm_retries < 3) { tcpm_log(port, "VDM Tx error, retry"); port->vdm_retries++; port->vdm_state = VDM_STATE_READY; @@ -2057,19 +2548,59 @@ static void vdm_run_state_machine(struct tcpm_port *port) tcpm_ams_finish(port); } else { tcpm_ams_finish(port); + if (port->tx_sop_type == TCPC_TX_SOP) + break; + /* Handle SOP' Transmission Errors */ + switch (PD_VDO_CMD(vdo_hdr)) { + /* + * If Discover Identity fails on SOP', then resume + * discovery process on SOP only. + */ + case CMD_DISCOVER_IDENT: + port->vdo_data[0] = 0; + response[0] = VDO(USB_SID_PD, 1, + typec_get_negotiated_svdm_version( + port->typec_port), + CMD_DISCOVER_SVID); + tcpm_queue_vdm(port, response[0], &response[1], + 0, TCPC_TX_SOP); + break; + /* + * If Discover SVIDs or Discover Modes fail, then + * proceed with Alt Mode discovery process on SOP. + */ + case CMD_DISCOVER_SVID: + tcpm_register_partner_altmodes(port); + break; + case CMD_DISCOVER_MODES: + tcpm_register_partner_altmodes(port); + break; + default: + break; + } } break; case VDM_STATE_SEND_MESSAGE: /* Prepare and send VDM */ memset(&msg, 0, sizeof(msg)); - msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF, - port->pwr_role, - port->data_role, - port->negotiated_rev, - port->message_id, port->vdo_count); + if (port->tx_sop_type == TCPC_TX_SOP_PRIME) { + msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF, + 0, /* Cable Plug Indicator for DFP/UFP */ + 0, /* Reserved */ + port->negotiated_rev_prime, + port->message_id_prime, + port->vdo_count); + } else { + msg.header = PD_HEADER_LE(PD_DATA_VENDOR_DEF, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, + port->vdo_count); + } for (i = 0; i < port->vdo_count; i++) msg.payload[i] = cpu_to_le32(port->vdo_data[i]); - res = tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); + res = tcpm_pd_transmit(port, port->tx_sop_type, &msg); if (res < 0) { port->vdm_state = VDM_STATE_ERR_SEND; } else { @@ -2244,7 +2775,7 @@ static int tcpm_altmode_enter(struct typec_altmode *altmode, u32 *vdo) header = VDO(altmode->svid, vdo ? 2 : 1, svdm_version, CMD_ENTER_MODE); header |= VDO_OPOS(altmode->mode); - tcpm_queue_vdm_unlocked(port, header, vdo, vdo ? 1 : 0); + tcpm_queue_vdm_unlocked(port, header, vdo, vdo ? 1 : 0, TCPC_TX_SOP); return 0; } @@ -2261,7 +2792,7 @@ static int tcpm_altmode_exit(struct typec_altmode *altmode) header = VDO(altmode->svid, 1, svdm_version, CMD_EXIT_MODE); header |= VDO_OPOS(altmode->mode); - tcpm_queue_vdm_unlocked(port, header, NULL, 0); + tcpm_queue_vdm_unlocked(port, header, NULL, 0, TCPC_TX_SOP); return 0; } @@ -2270,7 +2801,7 @@ static int tcpm_altmode_vdm(struct typec_altmode *altmode, { struct tcpm_port *port = typec_altmode_get_drvdata(altmode); - tcpm_queue_vdm_unlocked(port, header, data, count - 1); + tcpm_queue_vdm_unlocked(port, header, data, count - 1, TCPC_TX_SOP); return 0; } @@ -2281,6 +2812,58 @@ static const struct typec_altmode_ops tcpm_altmode_ops = { .vdm = tcpm_altmode_vdm, }; + +static int tcpm_cable_altmode_enter(struct typec_altmode *altmode, enum typec_plug_index sop, + u32 *vdo) +{ + struct tcpm_port *port = typec_altmode_get_drvdata(altmode); + int svdm_version; + u32 header; + + svdm_version = typec_get_cable_svdm_version(port->typec_port); + if (svdm_version < 0) + return svdm_version; + + header = VDO(altmode->svid, vdo ? 2 : 1, svdm_version, CMD_ENTER_MODE); + header |= VDO_OPOS(altmode->mode); + + tcpm_queue_vdm_unlocked(port, header, vdo, vdo ? 1 : 0, TCPC_TX_SOP_PRIME); + return 0; +} + +static int tcpm_cable_altmode_exit(struct typec_altmode *altmode, enum typec_plug_index sop) +{ + struct tcpm_port *port = typec_altmode_get_drvdata(altmode); + int svdm_version; + u32 header; + + svdm_version = typec_get_cable_svdm_version(port->typec_port); + if (svdm_version < 0) + return svdm_version; + + header = VDO(altmode->svid, 1, svdm_version, CMD_EXIT_MODE); + header |= VDO_OPOS(altmode->mode); + + tcpm_queue_vdm_unlocked(port, header, NULL, 0, TCPC_TX_SOP_PRIME); + return 0; +} + +static int tcpm_cable_altmode_vdm(struct typec_altmode *altmode, enum typec_plug_index sop, + u32 header, const u32 *data, int count) +{ + struct tcpm_port *port = typec_altmode_get_drvdata(altmode); + + tcpm_queue_vdm_unlocked(port, header, data, count - 1, TCPC_TX_SOP_PRIME); + + return 0; +} + +static const struct typec_cable_ops tcpm_cable_ops = { + .enter = tcpm_cable_altmode_enter, + .exit = tcpm_cable_altmode_exit, + .vdm = tcpm_cable_altmode_vdm, +}; + /* * PD (data, control) command handling functions */ @@ -2293,7 +2876,8 @@ static inline enum tcpm_state ready_state(struct tcpm_port *port) } static int tcpm_pd_send_control(struct tcpm_port *port, - enum pd_ctrl_msg_type type); + enum pd_ctrl_msg_type type, + enum tcpm_transmit_type tx_sop_type); static void tcpm_handle_alert(struct tcpm_port *port, const __le32 *payload, int cnt) @@ -2455,7 +3039,8 @@ static int tcpm_register_sink_caps(struct tcpm_port *port) } static void tcpm_pd_data_request(struct tcpm_port *port, - const struct pd_message *msg) + const struct pd_message *msg, + enum tcpm_transmit_type rx_sop_type) { enum pd_data_msg_type type = pd_header_type_le(msg->header); unsigned int cnt = pd_header_cnt_le(msg->header); @@ -2496,8 +3081,11 @@ static void tcpm_pd_data_request(struct tcpm_port *port, break; } - if (rev < PD_MAX_REV) + if (rev < PD_MAX_REV) { port->negotiated_rev = rev; + if (port->negotiated_rev_prime > port->negotiated_rev) + port->negotiated_rev_prime = port->negotiated_rev; + } if (port->pwr_role == TYPEC_SOURCE) { if (port->ams == GET_SOURCE_CAPABILITIES) @@ -2548,8 +3136,11 @@ static void tcpm_pd_data_request(struct tcpm_port *port, break; } - if (rev < PD_MAX_REV) + if (rev < PD_MAX_REV) { port->negotiated_rev = rev; + if (port->negotiated_rev_prime > port->negotiated_rev) + port->negotiated_rev_prime = port->negotiated_rev; + } if (port->pwr_role != TYPEC_SOURCE || cnt != 1) { tcpm_pd_handle_msg(port, @@ -2605,7 +3196,7 @@ static void tcpm_pd_data_request(struct tcpm_port *port, NONE_AMS); break; case PD_DATA_VENDOR_DEF: - tcpm_handle_vdm_request(port, msg->payload, cnt); + tcpm_handle_vdm_request(port, msg->payload, cnt, rx_sop_type); break; case PD_DATA_BIST: port->bist_request = le32_to_cpu(msg->payload[0]); @@ -2647,10 +3238,12 @@ static void tcpm_pps_complete(struct tcpm_port *port, int result) } static void tcpm_pd_ctrl_request(struct tcpm_port *port, - const struct pd_message *msg) + const struct pd_message *msg, + enum tcpm_transmit_type rx_sop_type) { enum pd_ctrl_msg_type type = pd_header_type_le(msg->header); enum tcpm_state next_state; + unsigned int rev = pd_header_rev_le(msg->header); /* * Stop VDM state machine if interrupted by other Messages while NOT_SUPP is allowed in @@ -2815,6 +3408,16 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port, case SOFT_RESET_SEND: if (port->ams == SOFT_RESET_AMS) tcpm_ams_finish(port); + /* + * SOP' Soft Reset is done after Vconn Swap, + * which returns to ready state + */ + if (rx_sop_type == TCPC_TX_SOP_PRIME) { + if (rev < port->negotiated_rev_prime) + port->negotiated_rev_prime = rev; + tcpm_set_state(port, ready_state(port), 0); + break; + } if (port->pwr_role == TYPEC_SOURCE) { port->upcoming_state = SRC_SEND_CAPABILITIES; tcpm_ams_start(port, POWER_NEGOTIATION); @@ -2981,6 +3584,7 @@ static void tcpm_pd_rx_handler(struct kthread_work *work) const struct pd_message *msg = &event->msg; unsigned int cnt = pd_header_cnt_le(msg->header); struct tcpm_port *port = event->port; + enum tcpm_transmit_type rx_sop_type = event->rx_sop_type; mutex_lock(&port->lock); @@ -2992,6 +3596,14 @@ static void tcpm_pd_rx_handler(struct kthread_work *work) unsigned int msgid = pd_header_msgid_le(msg->header); /* + * Drop SOP' messages if cannot receive via + * tcpm_can_communicate_sop_prime + */ + if (rx_sop_type == TCPC_TX_SOP_PRIME && + !tcpm_can_communicate_sop_prime(port)) + goto done; + + /* * USB PD standard, 6.6.1.2: * "... if MessageID value in a received Message is the * same as the stored value, the receiver shall return a @@ -3000,16 +3612,26 @@ static void tcpm_pd_rx_handler(struct kthread_work *work) * Message). Note: this shall not apply to the Soft_Reset * Message which always has a MessageID value of zero." */ - if (msgid == port->rx_msgid && type != PD_CTRL_SOFT_RESET) - goto done; - port->rx_msgid = msgid; + switch (rx_sop_type) { + case TCPC_TX_SOP_PRIME: + if (msgid == port->rx_msgid_prime) + goto done; + port->rx_msgid_prime = msgid; + break; + case TCPC_TX_SOP: + default: + if (msgid == port->rx_msgid && type != PD_CTRL_SOFT_RESET) + goto done; + port->rx_msgid = msgid; + break; + } /* * If both ends believe to be DFP/host, we have a data role * mismatch. */ if (!!(le16_to_cpu(msg->header) & PD_HEADER_DATA_ROLE) == - (port->data_role == TYPEC_HOST)) { + (port->data_role == TYPEC_HOST) && rx_sop_type == TCPC_TX_SOP) { tcpm_log(port, "Data role mismatch, initiating error recovery"); tcpm_set_state(port, ERROR_RECOVERY, 0); @@ -3017,9 +3639,9 @@ static void tcpm_pd_rx_handler(struct kthread_work *work) if (le16_to_cpu(msg->header) & PD_HEADER_EXT_HDR) tcpm_pd_ext_msg_request(port, msg); else if (cnt) - tcpm_pd_data_request(port, msg); + tcpm_pd_data_request(port, msg, rx_sop_type); else - tcpm_pd_ctrl_request(port, msg); + tcpm_pd_ctrl_request(port, msg, rx_sop_type); } } @@ -3028,7 +3650,8 @@ done: kfree(event); } -void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg) +void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg, + enum tcpm_transmit_type rx_sop_type) { struct pd_rx_event *event; @@ -3038,23 +3661,47 @@ void tcpm_pd_receive(struct tcpm_port *port, const struct pd_message *msg) kthread_init_work(&event->work, tcpm_pd_rx_handler); event->port = port; + event->rx_sop_type = rx_sop_type; memcpy(&event->msg, msg, sizeof(*msg)); kthread_queue_work(port->wq, &event->work); } EXPORT_SYMBOL_GPL(tcpm_pd_receive); static int tcpm_pd_send_control(struct tcpm_port *port, - enum pd_ctrl_msg_type type) + enum pd_ctrl_msg_type type, + enum tcpm_transmit_type tx_sop_type) { struct pd_message msg; memset(&msg, 0, sizeof(msg)); - msg.header = PD_HEADER_LE(type, port->pwr_role, - port->data_role, - port->negotiated_rev, - port->message_id, 0); + switch (tx_sop_type) { + case TCPC_TX_SOP_PRIME: + msg.header = PD_HEADER_LE(type, + 0, /* Cable Plug Indicator for DFP/UFP */ + 0, /* Reserved */ + port->negotiated_rev, + port->message_id_prime, + 0); + break; + case TCPC_TX_SOP: + msg.header = PD_HEADER_LE(type, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, + 0); + break; + default: + msg.header = PD_HEADER_LE(type, + port->pwr_role, + port->data_role, + port->negotiated_rev, + port->message_id, + 0); + break; + } - return tcpm_pd_transmit(port, TCPC_TX_SOP, &msg); + return tcpm_pd_transmit(port, tx_sop_type, &msg); } /* @@ -3073,13 +3720,13 @@ static bool tcpm_send_queued_message(struct tcpm_port *port) switch (queued_message) { case PD_MSG_CTRL_WAIT: - tcpm_pd_send_control(port, PD_CTRL_WAIT); + tcpm_pd_send_control(port, PD_CTRL_WAIT, TCPC_TX_SOP); break; case PD_MSG_CTRL_REJECT: - tcpm_pd_send_control(port, PD_CTRL_REJECT); + tcpm_pd_send_control(port, PD_CTRL_REJECT, TCPC_TX_SOP); break; case PD_MSG_CTRL_NOT_SUPP: - tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP); + tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP, TCPC_TX_SOP); break; case PD_MSG_DATA_SINK_CAP: ret = tcpm_pd_send_sink_caps(port); @@ -3649,6 +4296,7 @@ static int tcpm_src_attach(struct tcpm_port *port) port->attached = true; port->send_discover = true; + port->send_discover_prime = false; return 0; @@ -3665,6 +4313,15 @@ out_disable_mux: static void tcpm_typec_disconnect(struct tcpm_port *port) { + /* + * Unregister plug/cable outside of port->connected because cable can + * be discovered before SRC_READY/SNK_READY states where port->connected + * is set. + */ + typec_unregister_plug(port->plug_prime); + typec_unregister_cable(port->cable); + port->plug_prime = NULL; + port->cable = NULL; if (port->connected) { typec_partner_set_usb_power_delivery(port->partner, NULL); typec_unregister_partner(port->partner); @@ -3676,14 +4333,20 @@ static void tcpm_typec_disconnect(struct tcpm_port *port) static void tcpm_unregister_altmodes(struct tcpm_port *port) { struct pd_mode_data *modep = &port->mode_data; + struct pd_mode_data *modep_prime = &port->mode_data_prime; int i; for (i = 0; i < modep->altmodes; i++) { typec_unregister_altmode(port->partner_altmode[i]); port->partner_altmode[i] = NULL; } + for (i = 0; i < modep_prime->altmodes; i++) { + typec_unregister_altmode(port->plug_prime_altmode[i]); + port->plug_prime_altmode[i] = NULL; + } memset(modep, 0, sizeof(*modep)); + memset(modep_prime, 0, sizeof(*modep_prime)); } static void tcpm_set_partner_usb_comm_capable(struct tcpm_port *port, bool capable) @@ -3712,6 +4375,7 @@ static void tcpm_reset_port(struct tcpm_port *port) * we can check tcpm_pd_rx_handler() if we had seen it before. */ port->rx_msgid = -1; + port->rx_msgid_prime = -1; port->tcpc->set_pd_rx(port->tcpc, false); tcpm_init_vbus(port); /* also disables charging */ @@ -3783,6 +4447,7 @@ static int tcpm_snk_attach(struct tcpm_port *port) port->attached = true; port->send_discover = true; + port->send_discover_prime = false; return 0; } @@ -4023,8 +4688,11 @@ static void run_state_machine(struct tcpm_port *port) port->pwr_opmode = TYPEC_PWR_MODE_USB; port->caps_count = 0; port->negotiated_rev = PD_MAX_REV; + port->negotiated_rev_prime = PD_MAX_REV; port->message_id = 0; + port->message_id_prime = 0; port->rx_msgid = -1; + port->rx_msgid_prime = -1; port->explicit_contract = false; /* SNK -> SRC POWER/FAST_ROLE_SWAP finished */ if (port->ams == POWER_ROLE_SWAP || @@ -4045,8 +4713,12 @@ static void run_state_machine(struct tcpm_port *port) } ret = tcpm_pd_send_source_caps(port); if (ret < 0) { - tcpm_set_state(port, SRC_SEND_CAPABILITIES, - PD_T_SEND_SOURCE_CAP); + if (tcpm_can_communicate_sop_prime(port) && + IS_ERR_OR_NULL(port->cable)) + tcpm_set_state(port, SRC_VDM_IDENTITY_REQUEST, 0); + else + tcpm_set_state(port, SRC_SEND_CAPABILITIES, + PD_T_SEND_SOURCE_CAP); } else { /* * Per standard, we should clear the reset counter here. @@ -4087,7 +4759,7 @@ static void run_state_machine(struct tcpm_port *port) case SRC_NEGOTIATE_CAPABILITIES: ret = tcpm_pd_check_request(port); if (ret < 0) { - tcpm_pd_send_control(port, PD_CTRL_REJECT); + tcpm_pd_send_control(port, PD_CTRL_REJECT, TCPC_TX_SOP); if (!port->explicit_contract) { tcpm_set_state(port, SRC_WAIT_NEW_CAPABILITIES, 0); @@ -4095,7 +4767,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, SRC_READY, 0); } } else { - tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP); tcpm_set_partner_usb_comm_capable(port, !!(port->sink_request & RDO_USB_COMM)); tcpm_set_state(port, SRC_TRANSITION_SUPPLY, @@ -4104,7 +4776,7 @@ static void run_state_machine(struct tcpm_port *port) break; case SRC_TRANSITION_SUPPLY: /* XXX: regulator_set_voltage(vbus, ...) */ - tcpm_pd_send_control(port, PD_CTRL_PS_RDY); + tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP); port->explicit_contract = true; typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD); port->pwr_opmode = TYPEC_PWR_MODE_PD; @@ -4141,14 +4813,23 @@ static void run_state_machine(struct tcpm_port *port) * 6.4.4.3.1 Discover Identity * "The Discover Identity Command Shall only be sent to SOP when there is an * Explicit Contract." - * For now, this driver only supports SOP for DISCOVER_IDENTITY, thus using - * port->explicit_contract to decide whether to send the command. + * + * Discover Identity on SOP' should be discovered prior to the + * ready state, but if done after a Vconn Swap following Discover + * Identity on SOP then the discovery process can be run here + * as well. */ if (port->explicit_contract) { - tcpm_set_initial_svdm_version(port); + if (port->send_discover_prime) { + port->tx_sop_type = TCPC_TX_SOP_PRIME; + } else { + port->tx_sop_type = TCPC_TX_SOP; + tcpm_set_initial_svdm_version(port); + } mod_send_discover_delayed_work(port, 0); } else { port->send_discover = false; + port->send_discover_prime = false; } /* @@ -4264,8 +4945,11 @@ static void run_state_machine(struct tcpm_port *port) typec_set_pwr_opmode(port->typec_port, opmode); port->pwr_opmode = TYPEC_PWR_MODE_USB; port->negotiated_rev = PD_MAX_REV; + port->negotiated_rev_prime = PD_MAX_REV; port->message_id = 0; + port->message_id_prime = 0; port->rx_msgid = -1; + port->rx_msgid_prime = -1; port->explicit_contract = false; if (port->ams == POWER_ROLE_SWAP || @@ -4437,14 +5121,23 @@ static void run_state_machine(struct tcpm_port *port) * 6.4.4.3.1 Discover Identity * "The Discover Identity Command Shall only be sent to SOP when there is an * Explicit Contract." - * For now, this driver only supports SOP for DISCOVER_IDENTITY, thus using - * port->explicit_contract. + * + * Discover Identity on SOP' should be discovered prior to the + * ready state, but if done after a Vconn Swap following Discover + * Identity on SOP then the discovery process can be run here + * as well. */ if (port->explicit_contract) { - tcpm_set_initial_svdm_version(port); + if (port->send_discover_prime) { + port->tx_sop_type = TCPC_TX_SOP_PRIME; + } else { + port->tx_sop_type = TCPC_TX_SOP; + tcpm_set_initial_svdm_version(port); + } mod_send_discover_delayed_work(port, 0); } else { port->send_discover = false; + port->send_discover_prime = false; } power_supply_changed(port->psy); @@ -4485,6 +5178,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_unregister_altmodes(port); port->nr_sink_caps = 0; port->send_discover = true; + port->send_discover_prime = false; if (port->pwr_role == TYPEC_SOURCE) tcpm_set_state(port, SRC_HARD_RESET_VBUS_OFF, PD_T_PS_HARD_RESET); @@ -4586,7 +5280,7 @@ static void run_state_machine(struct tcpm_port *port) /* remove existing capabilities */ usb_power_delivery_unregister_capabilities(port->partner_source_caps); port->partner_source_caps = NULL; - tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP); tcpm_ams_finish(port); if (port->pwr_role == TYPEC_SOURCE) { port->upcoming_state = SRC_SEND_CAPABILITIES; @@ -4603,35 +5297,53 @@ static void run_state_machine(struct tcpm_port *port) tcpm_ams_start(port, SOFT_RESET_AMS); break; case SOFT_RESET_SEND: - port->message_id = 0; - port->rx_msgid = -1; - /* remove existing capabilities */ - usb_power_delivery_unregister_capabilities(port->partner_source_caps); - port->partner_source_caps = NULL; - if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET)) - tcpm_set_state_cond(port, hard_reset_state(port), 0); - else - tcpm_set_state_cond(port, hard_reset_state(port), - PD_T_SENDER_RESPONSE); + /* + * Power Delivery 3.0 Section 6.3.13 + * + * A Soft_Reset Message Shall be targeted at a specific entity + * depending on the type of SOP* packet used. + */ + if (port->tx_sop_type == TCPC_TX_SOP_PRIME) { + port->message_id_prime = 0; + port->rx_msgid_prime = -1; + tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET, TCPC_TX_SOP_PRIME); + tcpm_set_state_cond(port, ready_state(port), PD_T_SENDER_RESPONSE); + } else { + port->message_id = 0; + port->rx_msgid = -1; + /* remove existing capabilities */ + usb_power_delivery_unregister_capabilities(port->partner_source_caps); + port->partner_source_caps = NULL; + if (tcpm_pd_send_control(port, PD_CTRL_SOFT_RESET, TCPC_TX_SOP)) + tcpm_set_state_cond(port, hard_reset_state(port), 0); + else + tcpm_set_state_cond(port, hard_reset_state(port), + PD_T_SENDER_RESPONSE); + } break; /* DR_Swap states */ case DR_SWAP_SEND: - tcpm_pd_send_control(port, PD_CTRL_DR_SWAP); - if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20) + tcpm_pd_send_control(port, PD_CTRL_DR_SWAP, TCPC_TX_SOP); + if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20) { port->send_discover = true; + port->send_discover_prime = false; + } tcpm_set_state_cond(port, DR_SWAP_SEND_TIMEOUT, PD_T_SENDER_RESPONSE); break; case DR_SWAP_ACCEPT: - tcpm_pd_send_control(port, PD_CTRL_ACCEPT); - if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20) + tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP); + if (port->data_role == TYPEC_DEVICE || port->negotiated_rev > PD_REV20) { port->send_discover = true; + port->send_discover_prime = false; + } tcpm_set_state_cond(port, DR_SWAP_CHANGE_DR, 0); break; case DR_SWAP_SEND_TIMEOUT: tcpm_swap_complete(port, -ETIMEDOUT); port->send_discover = false; + port->send_discover_prime = false; tcpm_ams_finish(port); tcpm_set_state(port, ready_state(port), 0); break; @@ -4648,7 +5360,7 @@ static void run_state_machine(struct tcpm_port *port) break; case FR_SWAP_SEND: - if (tcpm_pd_send_control(port, PD_CTRL_FR_SWAP)) { + if (tcpm_pd_send_control(port, PD_CTRL_FR_SWAP, TCPC_TX_SOP)) { tcpm_set_state(port, ERROR_RECOVERY, 0); break; } @@ -4668,7 +5380,7 @@ static void run_state_machine(struct tcpm_port *port) break; case FR_SWAP_SNK_SRC_SOURCE_VBUS_APPLIED: tcpm_set_pwr_role(port, TYPEC_SOURCE); - if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) { + if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP)) { tcpm_set_state(port, ERROR_RECOVERY, 0); break; } @@ -4678,11 +5390,11 @@ static void run_state_machine(struct tcpm_port *port) /* PR_Swap states */ case PR_SWAP_ACCEPT: - tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP); tcpm_set_state(port, PR_SWAP_START, 0); break; case PR_SWAP_SEND: - tcpm_pd_send_control(port, PD_CTRL_PR_SWAP); + tcpm_pd_send_control(port, PD_CTRL_PR_SWAP, TCPC_TX_SOP); tcpm_set_state_cond(port, PR_SWAP_SEND_TIMEOUT, PD_T_SENDER_RESPONSE); break; @@ -4724,7 +5436,7 @@ static void run_state_machine(struct tcpm_port *port) * supply is turned off" */ tcpm_set_pwr_role(port, TYPEC_SINK); - if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY)) { + if (tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP)) { tcpm_set_state(port, ERROR_RECOVERY, 0); break; } @@ -4771,17 +5483,17 @@ static void run_state_machine(struct tcpm_port *port) * Source." */ tcpm_set_pwr_role(port, TYPEC_SOURCE); - tcpm_pd_send_control(port, PD_CTRL_PS_RDY); + tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP); tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START); break; case VCONN_SWAP_ACCEPT: - tcpm_pd_send_control(port, PD_CTRL_ACCEPT); + tcpm_pd_send_control(port, PD_CTRL_ACCEPT, TCPC_TX_SOP); tcpm_ams_finish(port); tcpm_set_state(port, VCONN_SWAP_START, 0); break; case VCONN_SWAP_SEND: - tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP); + tcpm_pd_send_control(port, PD_CTRL_VCONN_SWAP, TCPC_TX_SOP); tcpm_set_state(port, VCONN_SWAP_SEND_TIMEOUT, PD_T_SENDER_RESPONSE); break; @@ -4800,14 +5512,34 @@ static void run_state_machine(struct tcpm_port *port) PD_T_VCONN_SOURCE_ON); break; case VCONN_SWAP_TURN_ON_VCONN: - tcpm_set_vconn(port, true); - tcpm_pd_send_control(port, PD_CTRL_PS_RDY); - tcpm_set_state(port, ready_state(port), 0); + ret = tcpm_set_vconn(port, true); + tcpm_pd_send_control(port, PD_CTRL_PS_RDY, TCPC_TX_SOP); + /* + * USB PD 3.0 Section 6.4.4.3.1 + * + * Note that a Cable Plug or VPD will not be ready for PD + * Communication until tVCONNStable after VCONN has been applied + */ + if (!ret) + tcpm_set_state(port, VCONN_SWAP_SEND_SOFT_RESET, + PD_T_VCONN_STABLE); + else + tcpm_set_state(port, ready_state(port), 0); break; case VCONN_SWAP_TURN_OFF_VCONN: tcpm_set_vconn(port, false); tcpm_set_state(port, ready_state(port), 0); break; + case VCONN_SWAP_SEND_SOFT_RESET: + tcpm_swap_complete(port, port->swap_status); + if (tcpm_can_communicate_sop_prime(port)) { + port->tx_sop_type = TCPC_TX_SOP_PRIME; + port->upcoming_state = SOFT_RESET_SEND; + tcpm_ams_start(port, SOFT_RESET_AMS); + } else { + tcpm_set_state(port, ready_state(port), 0); + } + break; case DR_SWAP_CANCEL: case PR_SWAP_CANCEL: @@ -4843,7 +5575,7 @@ static void run_state_machine(struct tcpm_port *port) } break; case GET_STATUS_SEND: - tcpm_pd_send_control(port, PD_CTRL_GET_STATUS); + tcpm_pd_send_control(port, PD_CTRL_GET_STATUS, TCPC_TX_SOP); tcpm_set_state(port, GET_STATUS_SEND_TIMEOUT, PD_T_SENDER_RESPONSE); break; @@ -4851,7 +5583,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, ready_state(port), 0); break; case GET_PPS_STATUS_SEND: - tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS); + tcpm_pd_send_control(port, PD_CTRL_GET_PPS_STATUS, TCPC_TX_SOP); tcpm_set_state(port, GET_PPS_STATUS_SEND_TIMEOUT, PD_T_SENDER_RESPONSE); break; @@ -4859,7 +5591,7 @@ static void run_state_machine(struct tcpm_port *port) tcpm_set_state(port, ready_state(port), 0); break; case GET_SINK_CAP: - tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP); + tcpm_pd_send_control(port, PD_CTRL_GET_SINK_CAP, TCPC_TX_SOP); tcpm_set_state(port, GET_SINK_CAP_TIMEOUT, PD_T_SENDER_RESPONSE); break; case GET_SINK_CAP_TIMEOUT: @@ -4902,9 +5634,18 @@ static void run_state_machine(struct tcpm_port *port) /* Chunk state */ case CHUNK_NOT_SUPP: - tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP); + tcpm_pd_send_control(port, PD_CTRL_NOT_SUPP, TCPC_TX_SOP); tcpm_set_state(port, port->pwr_role == TYPEC_SOURCE ? SRC_READY : SNK_READY, 0); break; + + /* Cable states */ + case SRC_VDM_IDENTITY_REQUEST: + port->send_discover_prime = true; + port->tx_sop_type = TCPC_TX_SOP_PRIME; + mod_send_discover_delayed_work(port, 0); + port->upcoming_state = SRC_SEND_CAPABILITIES; + break; + default: WARN(1, "Unexpected port state %d\n", port->state); break; @@ -5596,7 +6337,8 @@ static void tcpm_enable_frs_work(struct kthread_work *work) goto unlock; /* Send when the state machine is idle */ - if (port->state != SNK_READY || port->vdm_sm_running || port->send_discover) + if (port->state != SNK_READY || port->vdm_sm_running || port->send_discover || + port->send_discover_prime) goto resched; port->upcoming_state = GET_SINK_CAP; @@ -5619,21 +6361,23 @@ static void tcpm_send_discover_work(struct kthread_work *work) mutex_lock(&port->lock); /* No need to send DISCOVER_IDENTITY anymore */ - if (!port->send_discover) + if (!port->send_discover && !port->send_discover_prime) goto unlock; if (port->data_role == TYPEC_DEVICE && port->negotiated_rev < PD_REV30) { port->send_discover = false; + port->send_discover_prime = false; goto unlock; } /* Retry if the port is not idle */ - if ((port->state != SRC_READY && port->state != SNK_READY) || port->vdm_sm_running) { + if ((port->state != SRC_READY && port->state != SNK_READY && + port->state != SRC_VDM_IDENTITY_REQUEST) || port->vdm_sm_running) { mod_send_discover_delayed_work(port, SEND_DISCOVER_RETRY_MS); goto unlock; } - tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0); + tcpm_send_vdm(port, USB_SID_PD, CMD_DISCOVER_IDENT, NULL, 0, port->tx_sop_type); unlock: mutex_unlock(&port->lock); @@ -6860,6 +7604,8 @@ struct tcpm_port *tcpm_register_port(struct device *dev, struct tcpc_dev *tcpc) typec_port_register_altmodes(port->typec_port, &tcpm_altmode_ops, port, port->port_altmode, ALTMODE_DISCOVERY_MAX); + typec_port_register_cable_ops(port->port_altmode, ARRAY_SIZE(port->port_altmode), + &tcpm_cable_ops); port->registered = true; mutex_lock(&port->lock); diff --git a/drivers/usb/typec/tcpm/wcove.c b/drivers/usb/typec/tcpm/wcove.c index 87d4abde0ea27..cf719307b3f6b 100644 --- a/drivers/usb/typec/tcpm/wcove.c +++ b/drivers/usb/typec/tcpm/wcove.c @@ -535,7 +535,7 @@ static irqreturn_t wcove_typec_irq(int irq, void *data) goto err; } - tcpm_pd_receive(wcove->tcpm, &msg); + tcpm_pd_receive(wcove->tcpm, &msg, TCPC_TX_SOP); ret = regmap_read(wcove->regmap, USBC_RXSTATUS, &status); diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index 14f5a7bfae2e9..cf52cb34d2859 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -36,6 +36,19 @@ */ #define UCSI_SWAP_TIMEOUT_MS 5000 +static int ucsi_read_message_in(struct ucsi *ucsi, void *buf, + size_t buf_size) +{ + /* + * Below UCSI 2.0, MESSAGE_IN was limited to 16 bytes. Truncate the + * reads here. + */ + if (ucsi->version <= UCSI_VERSION_1_2) + buf_size = clamp(buf_size, 0, 16); + + return ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, buf, buf_size); +} + static int ucsi_acknowledge_command(struct ucsi *ucsi) { u64 ctrl; @@ -72,7 +85,7 @@ static int ucsi_read_error(struct ucsi *ucsi) if (ret < 0) return ret; - ret = ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, &error, sizeof(error)); + ret = ucsi_read_message_in(ucsi, &error, sizeof(error)); if (ret) return ret; @@ -170,7 +183,7 @@ int ucsi_send_command(struct ucsi *ucsi, u64 command, length = ret; if (data) { - ret = ucsi->ops->read(ucsi, UCSI_MESSAGE_IN, data, size); + ret = ucsi_read_message_in(ucsi, data, size); if (ret) goto out; } @@ -386,6 +399,27 @@ static int ucsi_register_altmode(struct ucsi_connector *con, con->partner_altmode[i] = alt; break; + case UCSI_RECIPIENT_SOP_P: + i = ucsi_next_altmode(con->plug_altmode); + if (i < 0) { + ret = i; + goto err; + } + + ret = ucsi_altmode_next_mode(con->plug_altmode, desc->svid); + if (ret < 0) + return ret; + + desc->mode = ret; + + alt = typec_plug_register_altmode(con->plug, desc); + if (IS_ERR(alt)) { + ret = PTR_ERR(alt); + goto err; + } + + con->plug_altmode[i] = alt; + break; default: return -EINVAL; } @@ -553,6 +587,9 @@ static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient) case UCSI_RECIPIENT_SOP: adev = con->partner_altmode; break; + case UCSI_RECIPIENT_SOP_P: + adev = con->plug_altmode; + break; default: return; } @@ -633,6 +670,108 @@ static int ucsi_get_src_pdos(struct ucsi_connector *con) return ret; } +static int ucsi_read_identity(struct ucsi_connector *con, u8 recipient, + u8 offset, u8 bytes, void *resp) +{ + struct ucsi *ucsi = con->ucsi; + u64 command; + int ret; + + command = UCSI_COMMAND(UCSI_GET_PD_MESSAGE) | + UCSI_CONNECTOR_NUMBER(con->num); + command |= UCSI_GET_PD_MESSAGE_RECIPIENT(recipient); + command |= UCSI_GET_PD_MESSAGE_OFFSET(offset); + command |= UCSI_GET_PD_MESSAGE_BYTES(bytes); + command |= UCSI_GET_PD_MESSAGE_TYPE(UCSI_GET_PD_MESSAGE_TYPE_IDENTITY); + + ret = ucsi_send_command(ucsi, command, resp, bytes); + if (ret < 0) + dev_err(ucsi->dev, "UCSI_GET_PD_MESSAGE failed (%d)\n", ret); + + return ret; +} + +static int ucsi_get_identity(struct ucsi_connector *con, u8 recipient, + struct usb_pd_identity *id) +{ + struct ucsi *ucsi = con->ucsi; + struct ucsi_pd_message_disc_id resp = {}; + int ret; + + if (ucsi->version < UCSI_VERSION_2_0) { + /* + * Before UCSI v2.0, MESSAGE_IN is 16 bytes which cannot fit + * the 28 byte identity response including the VDM header. + * First request the VDM header, ID Header VDO, Cert Stat VDO + * and Product VDO. + */ + ret = ucsi_read_identity(con, recipient, 0, 0x10, &resp); + if (ret < 0) + return ret; + + + /* Then request Product Type VDO1 through Product Type VDO3. */ + ret = ucsi_read_identity(con, recipient, 0x10, 0xc, + &resp.vdo[0]); + if (ret < 0) + return ret; + + } else { + /* + * In UCSI v2.0 and after, MESSAGE_IN is large enough to request + * the large enough to request the full Discover Identity + * response at once. + */ + ret = ucsi_read_identity(con, recipient, 0x0, 0x1c, &resp); + if (ret < 0) + return ret; + } + + id->id_header = resp.id_header; + id->cert_stat = resp.cert_stat; + id->product = resp.product; + id->vdo[0] = resp.vdo[0]; + id->vdo[1] = resp.vdo[1]; + id->vdo[2] = resp.vdo[2]; + return 0; +} + +static int ucsi_get_partner_identity(struct ucsi_connector *con) +{ + int ret; + + ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP, + &con->partner_identity); + if (ret < 0) + return ret; + + ret = typec_partner_set_identity(con->partner); + if (ret < 0) { + dev_err(con->ucsi->dev, "Failed to set partner identity (%d)\n", + ret); + } + + return ret; +} + +static int ucsi_get_cable_identity(struct ucsi_connector *con) +{ + int ret; + + ret = ucsi_get_identity(con, UCSI_RECIPIENT_SOP_P, + &con->cable_identity); + if (ret < 0) + return ret; + + ret = typec_cable_set_identity(con->cable); + if (ret < 0) { + dev_err(con->ucsi->dev, "Failed to set cable identity (%d)\n", + ret); + } + + return ret; +} + static int ucsi_check_altmodes(struct ucsi_connector *con) { int ret, num_partner_am; @@ -721,6 +860,82 @@ static void ucsi_unregister_partner_pdos(struct ucsi_connector *con) con->partner_pd = NULL; } +static int ucsi_register_plug(struct ucsi_connector *con) +{ + struct typec_plug *plug; + struct typec_plug_desc desc = {.index = TYPEC_PLUG_SOP_P}; + + plug = typec_register_plug(con->cable, &desc); + if (IS_ERR(plug)) { + dev_err(con->ucsi->dev, + "con%d: failed to register plug (%ld)\n", con->num, + PTR_ERR(plug)); + return PTR_ERR(plug); + } + + con->plug = plug; + return 0; +} + +static void ucsi_unregister_plug(struct ucsi_connector *con) +{ + if (!con->plug) + return; + + ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP_P); + typec_unregister_plug(con->plug); + con->plug = NULL; +} + +static int ucsi_register_cable(struct ucsi_connector *con) +{ + struct typec_cable *cable; + struct typec_cable_desc desc = {}; + + switch (UCSI_CABLE_PROP_FLAG_PLUG_TYPE(con->cable_prop.flags)) { + case UCSI_CABLE_PROPERTY_PLUG_TYPE_A: + desc.type = USB_PLUG_TYPE_A; + break; + case UCSI_CABLE_PROPERTY_PLUG_TYPE_B: + desc.type = USB_PLUG_TYPE_B; + break; + case UCSI_CABLE_PROPERTY_PLUG_TYPE_C: + desc.type = USB_PLUG_TYPE_C; + break; + default: + desc.type = USB_PLUG_NONE; + break; + } + + desc.identity = &con->cable_identity; + desc.active = !!(UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE & + con->cable_prop.flags); + desc.pd_revision = UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD( + con->cable_prop.flags); + + cable = typec_register_cable(con->port, &desc); + if (IS_ERR(cable)) { + dev_err(con->ucsi->dev, + "con%d: failed to register cable (%ld)\n", con->num, + PTR_ERR(cable)); + return PTR_ERR(cable); + } + + con->cable = cable; + return 0; +} + +static void ucsi_unregister_cable(struct ucsi_connector *con) +{ + if (!con->cable) + return; + + ucsi_unregister_plug(con); + typec_unregister_cable(con->cable); + memset(&con->cable_identity, 0, sizeof(con->cable_identity)); + con->cable = NULL; +} + static void ucsi_pwr_opmode_change(struct ucsi_connector *con) { switch (UCSI_CONSTAT_PWR_OPMODE(con->status.flags)) { @@ -768,7 +983,9 @@ static int ucsi_register_partner(struct ucsi_connector *con) break; } + desc.identity = &con->partner_identity; desc.usb_pd = pwr_opmode == UCSI_CONSTAT_PWR_OPMODE_PD; + desc.pd_revision = UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags); partner = typec_register_partner(con->port, &desc); if (IS_ERR(partner)) { @@ -793,7 +1010,9 @@ static void ucsi_unregister_partner(struct ucsi_connector *con) typec_partner_set_usb_power_delivery(con->partner, NULL); ucsi_unregister_partner_pdos(con); ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP); + ucsi_unregister_cable(con); typec_unregister_partner(con->partner); + memset(&con->partner_identity, 0, sizeof(con->partner_identity)); con->partner = NULL; } @@ -843,6 +1062,27 @@ static void ucsi_partner_change(struct ucsi_connector *con) con->num, u_role); } +static int ucsi_check_connector_capability(struct ucsi_connector *con) +{ + u64 command; + int ret; + + if (!con->partner || con->ucsi->version < UCSI_VERSION_2_0) + return 0; + + command = UCSI_GET_CONNECTOR_CAPABILITY | UCSI_CONNECTOR_NUMBER(con->num); + ret = ucsi_send_command(con->ucsi, command, &con->cap, sizeof(con->cap)); + if (ret < 0) { + dev_err(con->ucsi->dev, "GET_CONNECTOR_CAPABILITY failed (%d)\n", ret); + return ret; + } + + typec_partner_set_pd_revision(con->partner, + UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(con->cap.flags)); + + return ret; +} + static int ucsi_check_connection(struct ucsi_connector *con) { u8 prev_flags = con->status.flags; @@ -872,6 +1112,42 @@ static int ucsi_check_connection(struct ucsi_connector *con) return 0; } +static int ucsi_check_cable(struct ucsi_connector *con) +{ + u64 command; + int ret; + + if (con->cable) + return 0; + + command = UCSI_GET_CABLE_PROPERTY | UCSI_CONNECTOR_NUMBER(con->num); + ret = ucsi_send_command(con->ucsi, command, &con->cable_prop, + sizeof(con->cable_prop)); + if (ret < 0) { + dev_err(con->ucsi->dev, "GET_CABLE_PROPERTY failed (%d)\n", + ret); + return ret; + } + + ret = ucsi_register_cable(con); + if (ret < 0) + return ret; + + ret = ucsi_get_cable_identity(con); + if (ret < 0) + return ret; + + ret = ucsi_register_plug(con); + if (ret < 0) + return ret; + + ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP_P); + if (ret < 0) + return ret; + + return 0; +} + static void ucsi_handle_connector_change(struct work_struct *work) { struct ucsi_connector *con = container_of(work, struct ucsi_connector, @@ -912,6 +1188,9 @@ static void ucsi_handle_connector_change(struct work_struct *work) if (con->status.flags & UCSI_CONSTAT_CONNECTED) { ucsi_register_partner(con); ucsi_partner_task(con, ucsi_check_connection, 1, HZ); + ucsi_partner_task(con, ucsi_check_connector_capability, 1, HZ); + ucsi_partner_task(con, ucsi_get_partner_identity, 1, HZ); + ucsi_partner_task(con, ucsi_check_cable, 1, HZ); if (UCSI_CONSTAT_PWR_OPMODE(con->status.flags) == UCSI_CONSTAT_PWR_OPMODE_PD) @@ -1310,6 +1589,8 @@ static int ucsi_register_port(struct ucsi *ucsi, struct ucsi_connector *con) ucsi_register_partner(con); ucsi_pwr_opmode_change(con); ucsi_port_psy_changed(con); + ucsi_get_partner_identity(con); + ucsi_check_cable(con); } /* Only notify USB controller if partner supports USB data */ @@ -1558,6 +1839,15 @@ int ucsi_register(struct ucsi *ucsi) if (!ucsi->version) return -ENODEV; + /* + * Version format is JJ.M.N (JJ = Major version, M = Minor version, + * N = sub-minor version). + */ + dev_dbg(ucsi->dev, "Registered UCSI interface with version %x.%x.%x", + UCSI_BCD_GET_MAJOR(ucsi->version), + UCSI_BCD_GET_MINOR(ucsi->version), + UCSI_BCD_GET_SUBMINOR(ucsi->version)); + queue_delayed_work(system_long_wq, &ucsi->work, 0); ucsi_debugfs_register(ucsi); diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index 6478016d5cb8b..32daf5f586505 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -10,6 +10,7 @@ #include <linux/usb/typec.h> #include <linux/usb/pd.h> #include <linux/usb/role.h> +#include <asm/unaligned.h> /* -------------------------------------------------------------------------- */ @@ -23,6 +24,23 @@ struct dentry; #define UCSI_CONTROL 8 #define UCSI_MESSAGE_IN 16 #define UCSI_MESSAGE_OUT 32 +#define UCSIv2_MESSAGE_OUT 272 + +/* UCSI versions */ +#define UCSI_VERSION_1_2 0x0120 +#define UCSI_VERSION_2_0 0x0200 +#define UCSI_VERSION_2_1 0x0210 +#define UCSI_VERSION_3_0 0x0300 + +#define UCSI_BCD_GET_MAJOR(_v_) (((_v_) >> 8) & 0xFF) +#define UCSI_BCD_GET_MINOR(_v_) (((_v_) >> 4) & 0x0F) +#define UCSI_BCD_GET_SUBMINOR(_v_) ((_v_) & 0x0F) + +/* + * Per USB PD 3.2, Section 6.2.1.1.5, the spec revision is represented by 2 bits + * 0b00 = 1.0, 0b01 = 2.0, 0b10 = 3.0, 0b11 = Reserved, Shall NOT be used. + */ +#define UCSI_SPEC_REVISION_TO_BCD(_v_) (((_v_) + 1) << 8) /* Command Status and Connector Change Indication (CCI) bits */ #define UCSI_CCI_CONNECTOR(_c_) (((_c_) & GENMASK(7, 1)) >> 1) @@ -88,6 +106,7 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); #define UCSI_GET_CABLE_PROPERTY 0x11 #define UCSI_GET_CONNECTOR_STATUS 0x12 #define UCSI_GET_ERROR_STATUS 0x13 +#define UCSI_GET_PD_MESSAGE 0x15 #define UCSI_CONNECTOR_NUMBER(_num_) ((u64)(_num_) << 16) #define UCSI_COMMAND(_cmd_) ((_cmd_) & 0xff) @@ -141,6 +160,18 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); #define UCSI_MAX_PDOS (4) #define UCSI_GET_PDOS_SRC_PDOS ((u64)1 << 34) +/* GET_PD_MESSAGE command bits */ +#define UCSI_GET_PD_MESSAGE_RECIPIENT(_r_) ((u64)(_r_) << 23) +#define UCSI_GET_PD_MESSAGE_OFFSET(_r_) ((u64)(_r_) << 26) +#define UCSI_GET_PD_MESSAGE_BYTES(_r_) ((u64)(_r_) << 34) +#define UCSI_GET_PD_MESSAGE_TYPE(_r_) ((u64)(_r_) << 42) +#define UCSI_GET_PD_MESSAGE_TYPE_SNK_CAP_EXT 0 +#define UCSI_GET_PD_MESSAGE_TYPE_SRC_CAP_EXT 1 +#define UCSI_GET_PD_MESSAGE_TYPE_BAT_CAP 2 +#define UCSI_GET_PD_MESSAGE_TYPE_BAT_STAT 3 +#define UCSI_GET_PD_MESSAGE_TYPE_IDENTITY 4 +#define UCSI_GET_PD_MESSAGE_TYPE_REVISION 5 + /* -------------------------------------------------------------------------- */ /* Error information returned by PPM in response to GET_ERROR_STATUS command. */ @@ -203,9 +234,29 @@ struct ucsi_connector_capability { #define UCSI_CONCAP_OPMODE_USB2 BIT(5) #define UCSI_CONCAP_OPMODE_USB3 BIT(6) #define UCSI_CONCAP_OPMODE_ALT_MODE BIT(7) - u8 flags; + u32 flags; #define UCSI_CONCAP_FLAG_PROVIDER BIT(0) #define UCSI_CONCAP_FLAG_CONSUMER BIT(1) +#define UCSI_CONCAP_FLAG_SWAP_TO_DFP BIT(2) +#define UCSI_CONCAP_FLAG_SWAP_TO_UFP BIT(3) +#define UCSI_CONCAP_FLAG_SWAP_TO_SRC BIT(4) +#define UCSI_CONCAP_FLAG_SWAP_TO_SINK BIT(5) +#define UCSI_CONCAP_FLAG_EX_OP_MODE(_f_) \ + (((_f_) & GENMASK(13, 6)) >> 6) +#define UCSI_CONCAP_EX_OP_MODE_USB4_GEN2 BIT(0) +#define UCSI_CONCAP_EX_OP_MODE_EPR_SRC BIT(1) +#define UCSI_CONCAP_EX_OP_MODE_EPR_SINK BIT(2) +#define UCSI_CONCAP_EX_OP_MODE_USB4_GEN3 BIT(3) +#define UCSI_CONCAP_EX_OP_MODE_USB4_GEN4 BIT(4) +#define UCSI_CONCAP_FLAG_MISC_CAPS(_f_) \ + (((_f_) & GENMASK(17, 14)) >> 14) +#define UCSI_CONCAP_MISC_CAP_FW_UPDATE BIT(0) +#define UCSI_CONCAP_MISC_CAP_SECURITY BIT(1) +#define UCSI_CONCAP_FLAG_REV_CURR_PROT_SUPPORT BIT(18) +#define UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV(_f_) \ + (((_f_) & GENMASK(20, 19)) >> 19) +#define UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV_AS_BCD(_f_) \ + UCSI_SPEC_REVISION_TO_BCD(UCSI_CONCAP_FLAG_PARTNER_PD_MAJOR_REV(_f_)) } __packed; struct ucsi_altmode { @@ -221,12 +272,15 @@ struct ucsi_cable_property { #define UCSI_CABLE_PROP_FLAG_VBUS_IN_CABLE BIT(0) #define UCSI_CABLE_PROP_FLAG_ACTIVE_CABLE BIT(1) #define UCSI_CABLE_PROP_FLAG_DIRECTIONALITY BIT(2) -#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_) ((_f_) & GENMASK(3, 0)) +#define UCSI_CABLE_PROP_FLAG_PLUG_TYPE(_f_) (((_f_) & GENMASK(4, 3)) >> 3) #define UCSI_CABLE_PROPERTY_PLUG_TYPE_A 0 #define UCSI_CABLE_PROPERTY_PLUG_TYPE_B 1 #define UCSI_CABLE_PROPERTY_PLUG_TYPE_C 2 #define UCSI_CABLE_PROPERTY_PLUG_OTHER 3 -#define UCSI_CABLE_PROP_MODE_SUPPORT BIT(5) +#define UCSI_CABLE_PROP_FLAG_MODE_SUPPORT BIT(5) +#define UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV(_f_) (((_f_) & GENMASK(7, 6)) >> 6) +#define UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV_AS_BCD(_f_) \ + UCSI_SPEC_REVISION_TO_BCD(UCSI_CABLE_PROP_FLAG_PD_MAJOR_REV(_f_)) u8 latency; } __packed; @@ -265,15 +319,48 @@ struct ucsi_connector_status { #define UCSI_CONSTAT_PARTNER_TYPE_DEBUG 5 #define UCSI_CONSTAT_PARTNER_TYPE_AUDIO 6 u32 request_data_obj; - u8 pwr_status; -#define UCSI_CONSTAT_BC_STATUS(_p_) ((_p_) & GENMASK(2, 0)) + + u8 pwr_status[3]; +#define UCSI_CONSTAT_BC_STATUS(_p_) ((_p_[0]) & GENMASK(1, 0)) #define UCSI_CONSTAT_BC_NOT_CHARGING 0 #define UCSI_CONSTAT_BC_NOMINAL_CHARGING 1 #define UCSI_CONSTAT_BC_SLOW_CHARGING 2 #define UCSI_CONSTAT_BC_TRICKLE_CHARGING 3 -#define UCSI_CONSTAT_PROVIDER_CAP_LIMIT(_p_) (((_p_) & GENMASK(6, 3)) >> 3) +#define UCSI_CONSTAT_PROVIDER_CAP_LIMIT(_p_) (((_p_[0]) & GENMASK(5, 2)) >> 2) #define UCSI_CONSTAT_CAP_PWR_LOWERED 0 #define UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT 1 +#define UCSI_CONSTAT_PROVIDER_PD_VERSION_OPER_MODE(_p_) \ + ((get_unaligned_le32(_p_) & GENMASK(21, 6)) >> 6) +#define UCSI_CONSTAT_ORIENTATION(_p_) (((_p_[2]) & GENMASK(6, 6)) >> 6) +#define UCSI_CONSTAT_ORIENTATION_DIRECT 0 +#define UCSI_CONSTAT_ORIENTATION_FLIPPED 1 +#define UCSI_CONSTAT_SINK_PATH_STATUS(_p_) (((_p_[2]) & GENMASK(7, 7)) >> 7) +#define UCSI_CONSTAT_SINK_PATH_DISABLED 0 +#define UCSI_CONSTAT_SINK_PATH_ENABLED 1 + u8 pwr_readings[9]; +#define UCSI_CONSTAT_REV_CURR_PROT_STATUS(_p_) ((_p_[0]) & 0x1) +#define UCSI_CONSTAT_PWR_READING_VALID(_p_) (((_p_[0]) & GENMASK(1, 1)) >> 1) +#define UCSI_CONSTAT_CURRENT_SCALE(_p_) (((_p_[0]) & GENMASK(4, 2)) >> 2) +#define UCSI_CONSTAT_PEAK_CURRENT(_p_) \ + ((get_unaligned_le32(_p_) & GENMASK(20, 5)) >> 5) +#define UCSI_CONSTAT_AVG_CURRENT(_p_) \ + ((get_unaligned_le32(&(_p_)[2]) & GENMASK(20, 5)) >> 5) +#define UCSI_CONSTAT_VOLTAGE_SCALE(_p_) \ + ((get_unaligned_le16(&(_p_)[4]) & GENMASK(8, 5)) >> 5) +#define UCSI_CONSTAT_VOLTAGE_READING(_p_) \ + ((get_unaligned_le32(&(_p_)[5]) & GENMASK(16, 1)) >> 1) +} __packed; + +/* + * Data structure filled by PPM in response to GET_PD_MESSAGE command with the + * Response Message Type set to Discover Identity Response. + */ +struct ucsi_pd_message_disc_id { + u32 vdm_header; + u32 id_header; + u32 cert_stat; + u32 product; + u32 vdo[3]; } __packed; /* -------------------------------------------------------------------------- */ @@ -341,14 +428,18 @@ struct ucsi_connector { struct typec_port *port; struct typec_partner *partner; + struct typec_cable *cable; + struct typec_plug *plug; struct typec_altmode *port_altmode[UCSI_MAX_ALTMODES]; struct typec_altmode *partner_altmode[UCSI_MAX_ALTMODES]; + struct typec_altmode *plug_altmode[UCSI_MAX_ALTMODES]; struct typec_capability typec_cap; struct ucsi_connector_status status; struct ucsi_connector_capability cap; + struct ucsi_cable_property cable_prop; struct power_supply *psy; struct power_supply_desc psy_desc; u32 rdo; @@ -364,6 +455,10 @@ struct ucsi_connector { struct usb_power_delivery_capabilities *partner_sink_caps; struct usb_role_switch *usb_role_sw; + + /* USB PD identity */ + struct usb_pd_identity partner_identity; + struct usb_pd_identity cable_identity; }; int ucsi_send_command(struct ucsi *ucsi, u64 command, diff --git a/drivers/usb/typec/ucsi/ucsi_ccg.c b/drivers/usb/typec/ucsi/ucsi_ccg.c index 449c125f6f870..dda7c7c94e08a 100644 --- a/drivers/usb/typec/ucsi/ucsi_ccg.c +++ b/drivers/usb/typec/ucsi/ucsi_ccg.c @@ -192,6 +192,12 @@ struct ucsi_ccg_altmode { bool checked; } __packed; +#define CCGX_MESSAGE_IN_MAX 4 +struct op_region { + __le32 cci; + __le32 message_in[CCGX_MESSAGE_IN_MAX]; +}; + struct ucsi_ccg { struct device *dev; struct ucsi *ucsi; @@ -222,6 +228,13 @@ struct ucsi_ccg { bool has_multiple_dp; struct ucsi_ccg_altmode orig[UCSI_MAX_ALTMODES]; struct ucsi_ccg_altmode updated[UCSI_MAX_ALTMODES]; + + /* + * This spinlock protects op_data which includes CCI and MESSAGE_IN that + * will be updated in ISR + */ + spinlock_t op_lock; + struct op_region op_data; }; static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) @@ -305,12 +318,42 @@ static int ccg_write(struct ucsi_ccg *uc, u16 rab, const u8 *data, u32 len) return 0; } +static int ccg_op_region_update(struct ucsi_ccg *uc, u32 cci) +{ + u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(UCSI_MESSAGE_IN); + struct op_region *data = &uc->op_data; + unsigned char *buf; + size_t size = sizeof(data->message_in); + + buf = kzalloc(size, GFP_ATOMIC); + if (!buf) + return -ENOMEM; + if (UCSI_CCI_LENGTH(cci)) { + int ret = ccg_read(uc, reg, (void *)buf, size); + + if (ret) { + kfree(buf); + return ret; + } + } + + spin_lock(&uc->op_lock); + data->cci = cpu_to_le32(cci); + if (UCSI_CCI_LENGTH(cci)) + memcpy(&data->message_in, buf, size); + spin_unlock(&uc->op_lock); + kfree(buf); + return 0; +} + static int ucsi_ccg_init(struct ucsi_ccg *uc) { unsigned int count = 10; u8 data; int status; + spin_lock_init(&uc->op_lock); + data = CCGX_RAB_UCSI_CONTROL_STOP; status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); if (status < 0) @@ -520,9 +563,20 @@ static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset, u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset); struct ucsi_capability *cap; struct ucsi_altmode *alt; - int ret; + int ret = 0; + + if (offset == UCSI_CCI) { + spin_lock(&uc->op_lock); + memcpy(val, &(uc->op_data).cci, val_len); + spin_unlock(&uc->op_lock); + } else if (offset == UCSI_MESSAGE_IN) { + spin_lock(&uc->op_lock); + memcpy(val, &(uc->op_data).message_in, val_len); + spin_unlock(&uc->op_lock); + } else { + ret = ccg_read(uc, reg, val, val_len); + } - ret = ccg_read(uc, reg, val, val_len); if (ret) return ret; @@ -559,9 +613,18 @@ static int ucsi_ccg_read(struct ucsi *ucsi, unsigned int offset, static int ucsi_ccg_async_write(struct ucsi *ucsi, unsigned int offset, const void *val, size_t val_len) { + struct ucsi_ccg *uc = ucsi_get_drvdata(ucsi); u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(offset); - return ccg_write(ucsi_get_drvdata(ucsi), reg, val, val_len); + /* + * UCSI may read CCI instantly after async_write, + * clear CCI to avoid caller getting wrong data before we get CCI from ISR + */ + spin_lock(&uc->op_lock); + uc->op_data.cci = 0; + spin_unlock(&uc->op_lock); + + return ccg_write(uc, reg, val, val_len); } static int ucsi_ccg_sync_write(struct ucsi *ucsi, unsigned int offset, @@ -615,13 +678,18 @@ static irqreturn_t ccg_irq_handler(int irq, void *data) u16 reg = CCGX_RAB_UCSI_DATA_BLOCK(UCSI_CCI); struct ucsi_ccg *uc = data; u8 intr_reg; - u32 cci; - int ret; + u32 cci = 0; + int ret = 0; ret = ccg_read(uc, CCGX_RAB_INTR_REG, &intr_reg, sizeof(intr_reg)); if (ret) return ret; + if (!intr_reg) + return IRQ_HANDLED; + else if (!(intr_reg & UCSI_READ_INT)) + goto err_clear_irq; + ret = ccg_read(uc, reg, (void *)&cci, sizeof(cci)); if (ret) goto err_clear_irq; @@ -629,13 +697,21 @@ static irqreturn_t ccg_irq_handler(int irq, void *data) if (UCSI_CCI_CONNECTOR(cci)) ucsi_connector_change(uc->ucsi, UCSI_CCI_CONNECTOR(cci)); - if (test_bit(DEV_CMD_PENDING, &uc->flags) && - cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE)) - complete(&uc->complete); + /* + * As per CCGx UCSI interface guide, copy CCI and MESSAGE_IN + * to the OpRegion before clear the UCSI interrupt + */ + ret = ccg_op_region_update(uc, cci); + if (ret) + goto err_clear_irq; err_clear_irq: ccg_write(uc, CCGX_RAB_INTR_REG, &intr_reg, sizeof(intr_reg)); + if (!ret && test_bit(DEV_CMD_PENDING, &uc->flags) && + cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE)) + complete(&uc->complete); + return IRQ_HANDLED; } diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c index faccc942b381b..932e7bf694473 100644 --- a/drivers/usb/typec/ucsi/ucsi_glink.c +++ b/drivers/usb/typec/ucsi/ucsi_glink.c @@ -298,6 +298,7 @@ static void pmic_glink_ucsi_destroy(void *data) } static const struct of_device_id pmic_glink_ucsi_of_quirks[] = { + { .compatible = "qcom,qcm6490-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, }, { .compatible = "qcom,sc8180x-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, }, { .compatible = "qcom,sc8280xp-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, }, { .compatible = "qcom,sm8350-pmic-glink", .data = (void *)UCSI_NO_PARTNER_PDOS, }, diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index 58be86e6fe83b..03cd5bae92d3f 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -122,6 +122,11 @@ struct phy_ops { union phy_configure_opts *opts); int (*reset)(struct phy *phy); int (*calibrate)(struct phy *phy); + + /* notify phy connect status change */ + int (*connect)(struct phy *phy, int port); + int (*disconnect)(struct phy *phy, int port); + void (*release)(struct phy *phy); struct module *owner; }; @@ -243,6 +248,8 @@ static inline enum phy_mode phy_get_mode(struct phy *phy) } int phy_reset(struct phy *phy); int phy_calibrate(struct phy *phy); +int phy_notify_connect(struct phy *phy, int port); +int phy_notify_disconnect(struct phy *phy, int port); static inline int phy_get_bus_width(struct phy *phy) { return phy->attrs.bus_width; @@ -396,6 +403,20 @@ static inline int phy_calibrate(struct phy *phy) return -ENOSYS; } +static inline int phy_notify_connect(struct phy *phy, int index) +{ + if (!phy) + return 0; + return -ENOSYS; +} + +static inline int phy_notify_disconnect(struct phy *phy, int index) +{ + if (!phy) + return 0; + return -ENOSYS; +} + static inline int phy_configure(struct phy *phy, union phy_configure_opts *opts) { diff --git a/include/linux/phy/tegra/xusb.h b/include/linux/phy/tegra/xusb.h index 70998e6dd6fdc..6ca51e0080ec0 100644 --- a/include/linux/phy/tegra/xusb.h +++ b/include/linux/phy/tegra/xusb.h @@ -26,6 +26,7 @@ void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy); int tegra_phy_xusb_utmi_port_reset(struct phy *phy); int tegra_xusb_padctl_get_usb3_companion(struct tegra_xusb_padctl *padctl, unsigned int port); +int tegra_xusb_padctl_get_port_number(struct phy *phy); int tegra_xusb_padctl_enable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy, enum usb_device_speed speed); int tegra_xusb_padctl_disable_phy_sleepwalk(struct tegra_xusb_padctl *padctl, struct phy *phy); diff --git a/include/linux/thunderbolt.h b/include/linux/thunderbolt.h index 2c835e5c41f63..4338ea9ac4fd9 100644 --- a/include/linux/thunderbolt.h +++ b/include/linux/thunderbolt.h @@ -87,8 +87,8 @@ struct tb { }; extern const struct bus_type tb_bus_type; -extern struct device_type tb_service_type; -extern struct device_type tb_xdomain_type; +extern const struct device_type tb_service_type; +extern const struct device_type tb_xdomain_type; #define TB_LINKS_PER_PHY_PORT 2 diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h index ca796dc1a984f..6e55556100100 100644 --- a/include/linux/usb/audio-v2.h +++ b/include/linux/usb/audio-v2.h @@ -82,7 +82,7 @@ struct uac_clock_source_descriptor { #define UAC_CLOCK_SOURCE_TYPE_INT_PROG 0x3 #define UAC_CLOCK_SOURCE_SYNCED_TO_SOF (1 << 2) -/* 4.7.2.2 Clock Source Descriptor */ +/* 4.7.2.2 Clock Selector Descriptor */ struct uac_clock_selector_descriptor { __u8 bLength; @@ -91,7 +91,7 @@ struct uac_clock_selector_descriptor { __u8 bClockID; __u8 bNrInPins; __u8 baCSourceID[]; - /* bmControls and iClockSource omitted */ + /* bmControls and iClockSelector omitted */ } __attribute__((packed)); /* 4.7.2.3 Clock Multiplier Descriptor */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 6532beb587b19..56dda8e1562d1 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -52,6 +52,7 @@ struct usb_ep; * @short_not_ok: When reading data, makes short packets be * treated as errors (queue stops advancing till cleanup). * @dma_mapped: Indicates if request has been mapped to DMA (internal) + * @sg_was_mapped: Set if the scatterlist has been mapped before the request * @complete: Function called when request completes, so this request and * its buffer may be re-used. The function will always be called with * interrupts disabled, and it must not sleep. @@ -111,6 +112,7 @@ struct usb_request { unsigned zero:1; unsigned short_not_ok:1; unsigned dma_mapped:1; + unsigned sg_was_mapped:1; void (*complete)(struct usb_ep *ep, struct usb_request *req); diff --git a/include/linux/usb/of.h b/include/linux/usb/of.h index 98487fd7ab116..de42f14bd2800 100644 --- a/include/linux/usb/of.h +++ b/include/linux/usb/of.h @@ -6,6 +6,7 @@ #ifndef __LINUX_USB_OF_H #define __LINUX_USB_OF_H +#include <linux/usb.h> #include <linux/usb/ch9.h> #include <linux/usb/otg.h> #include <linux/usb/phy.h> @@ -17,6 +18,7 @@ enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0); bool of_usb_host_tpl_support(struct device_node *np); int of_usb_update_otg_caps(struct device_node *np, struct usb_otg_caps *otg_caps); +enum usb_port_connect_type usb_of_get_connect_type(struct usb_device *hub, int port1); struct device_node *usb_of_get_device_node(struct usb_device *hub, int port1); bool usb_of_has_combined_node(struct usb_device *udev); struct device_node *usb_of_get_interface_node(struct usb_device *udev, @@ -37,6 +39,11 @@ static inline int of_usb_update_otg_caps(struct device_node *np, { return 0; } +static inline enum usb_port_connect_type +usb_of_get_connect_type(const struct usb_device *hub, int port1) +{ + return USB_PORT_CONNECT_TYPE_UNKNOWN; +} static inline struct device_node * usb_of_get_device_node(struct usb_device *hub, int port1) { diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index eb626af0e4e7c..d50098fb16b5d 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -483,6 +483,7 @@ static inline unsigned int rdo_max_power(u32 rdo) #define PD_T_BIST_CONT_MODE 50 /* 30 - 60 ms */ #define PD_T_SINK_TX 16 /* 16 - 20 ms */ #define PD_T_CHUNK_NOT_SUPP 42 /* 40 - 50 ms */ +#define PD_T_VCONN_STABLE 50 #define PD_T_DRP_TRY 100 /* 75 - 150 ms */ #define PD_T_DRP_TRYWAIT 600 /* 400 - 800 ms */ diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h index 3a747938cdab4..5c48e8a81403d 100644 --- a/include/linux/usb/pd_vdo.h +++ b/include/linux/usb/pd_vdo.h @@ -7,6 +7,7 @@ #define __LINUX_USB_PD_VDO_H #include "pd.h" +#include <linux/bitfield.h> /* * VDO : Vendor Defined Message Object @@ -86,12 +87,15 @@ * * Request is simply properly formatted SVDM header * - * Response is 4 data objects: + * Response is 4 data objects for Power Delivery 2.0 and Passive Cables for + * Power Delivery 3.0. Active Cables in Power Delivery 3.0 have 5 data objects. * [0] :: SVDM header * [1] :: Identitiy header * [2] :: Cert Stat VDO * [3] :: (Product | Cable) VDO + * [4] :: Cable VDO 1 * [4] :: AMA VDO + * [5] :: Cable VDO 2 * */ #define VDO_INDEX_HDR 0 @@ -100,6 +104,8 @@ #define VDO_INDEX_CABLE 3 #define VDO_INDEX_PRODUCT 3 #define VDO_INDEX_AMA 4 +#define VDO_INDEX_CABLE_1 4 +#define VDO_INDEX_CABLE_2 5 /* * SVDM Identity Header @@ -150,6 +156,7 @@ #define PD_IDH_MODAL_SUPP(vdo) ((vdo) & (1 << 26)) #define PD_IDH_DFP_PTYPE(vdo) (((vdo) >> 23) & 0x7) #define PD_IDH_CONN_TYPE(vdo) (((vdo) >> 21) & 0x3) +#define PD_IDH_HOST_SUPP(vdo) ((vdo) & (1 << 31)) /* * Cert Stat VDO @@ -182,7 +189,7 @@ * <5:3> :: Alternate modes * <2:0> :: USB highest speed */ -#define PD_VDO_UFP_DEVCAP(vdo) (((vdo) & GENMASK(27, 24)) >> 24) +#define PD_VDO_UFP_DEVCAP(vdo) FIELD_GET(GENMASK(27, 24), vdo) /* UFP VDO Version */ #define UFP_VDO_VER1_2 2 @@ -241,7 +248,7 @@ * <21:5> :: Reserved * <4:0> :: Port number */ -#define PD_VDO_DFP_HOSTCAP(vdo) (((vdo) & GENMASK(26, 24)) >> 24) +#define PD_VDO_DFP_HOSTCAP(vdo) FIELD_GET(GENMASK(26, 24), vdo) #define DFP_VDO_VER1_1 1 #define HOST_USB2_CAPABLE BIT(0) diff --git a/include/linux/usb/tcpci.h b/include/linux/usb/tcpci.h index 467e8045e9f86..47a86b8a4a507 100644 --- a/include/linux/usb/tcpci.h +++ b/include/linux/usb/tcpci.h @@ -145,6 +145,7 @@ #define TCPC_RX_BYTE_CNT 0x30 #define TCPC_RX_BUF_FRAME_TYPE 0x31 #define TCPC_RX_BUF_FRAME_TYPE_SOP 0 +#define TCPC_RX_BUF_FRAME_TYPE_SOP1 1 #define TCPC_RX_HDR 0x32 #define TCPC_RX_DATA 0x34 /* through 0x4f */ @@ -198,12 +199,23 @@ struct tcpci; * Chip level drivers are expected to check for contaminant and call * tcpm_clean_port when the port is clean to put the port back into * toggling state. + * @cable_comm_capable + * optional; Set when TCPC can communicate with cable plugs over SOP' + * @attempt_vconn_swap_discovery: + * Optional; The callback is called by the TCPM when the result of + * a Discover Identity request indicates that the port partner is + * a receptacle capable of modal operation. Chip level TCPCI drivers + * can implement their own policy to determine if and when a Vconn + * swap following Discover Identity on SOP' occurs. + * Return true when the TCPM is allowed to request a Vconn swap + * after Discovery Identity on SOP. */ struct tcpci_data { struct regmap *regmap; unsigned char TX_BUF_BYTE_x_hidden:1; unsigned char auto_discharge_disconnect:1; unsigned char vbus_vsafe0v:1; + unsigned char cable_comm_capable:1; int (*init)(struct tcpci *tcpci, struct tcpci_data *data); int (*set_vconn)(struct tcpci *tcpci, struct tcpci_data *data, @@ -215,6 +227,7 @@ struct tcpci_data { void (*set_partner_usb_comm_capable)(struct tcpci *tcpci, struct tcpci_data *data, bool capable); void (*check_contaminant)(struct tcpci *tcpci, struct tcpci_data *data); + bool (*attempt_vconn_swap_discovery)(struct tcpci *tcpci, struct tcpci_data *data); }; struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data); diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h index 65fac5e1f3178..061da9546a813 100644 --- a/include/linux/usb/tcpm.h +++ b/include/linux/usb/tcpm.h @@ -119,6 +119,17 @@ enum tcpm_transmit_type { * at the end of the deboumce period or when the port is still * toggling. Chip level drivers are expected to check for contaminant * and call tcpm_clean_port when the port is clean. + * @cable_comm_capable + * Optional; Returns whether cable communication over SOP' is supported + * by the tcpc + * @attempt_vconn_swap_discovery: + * Optional; The callback is called by the TCPM when the result of + * a Discover Identity request indicates that the port partner is + * a receptacle capable of modal operation. Chip level TCPCI drivers + * can implement their own policy to determine if and when a Vconn + * swap following Discover Identity on SOP' occurs. + * Return true when the TCPM is allowed to request a Vconn swap + * after Discovery Identity on SOP. */ struct tcpc_dev { struct fwnode_handle *fwnode; @@ -133,6 +144,8 @@ struct tcpc_dev { enum typec_cc_status *cc2); int (*set_polarity)(struct tcpc_dev *dev, enum typec_cc_polarity polarity); + int (*set_orientation)(struct tcpc_dev *dev, + enum typec_orientation orientation); int (*set_vconn)(struct tcpc_dev *dev, bool on); int (*set_vbus)(struct tcpc_dev *dev, bool on, bool charge); int (*set_current_limit)(struct tcpc_dev *dev, u32 max_ma, u32 mv); @@ -154,6 +167,8 @@ struct tcpc_dev { bool (*is_vbus_vsafe0v)(struct tcpc_dev *dev); void (*set_partner_usb_comm_capable)(struct tcpc_dev *dev, bool enable); void (*check_contaminant)(struct tcpc_dev *dev); + bool (*cable_comm_capable)(struct tcpc_dev *dev); + bool (*attempt_vconn_swap_discovery)(struct tcpc_dev *dev); }; struct tcpm_port; @@ -166,7 +181,8 @@ void tcpm_cc_change(struct tcpm_port *port); void tcpm_sink_frs(struct tcpm_port *port); void tcpm_sourcing_vbus(struct tcpm_port *port); void tcpm_pd_receive(struct tcpm_port *port, - const struct pd_message *msg); + const struct pd_message *msg, + enum tcpm_transmit_type rx_sop_type); void tcpm_pd_transmit_complete(struct tcpm_port *port, enum tcpm_transmit_status status); void tcpm_pd_hard_reset(struct tcpm_port *port); diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h index a05d6f6f25369..b35b427561ab5 100644 --- a/include/linux/usb/typec.h +++ b/include/linux/usb/typec.h @@ -18,6 +18,7 @@ struct typec_cable; struct typec_plug; struct typec_port; struct typec_altmode_ops; +struct typec_cable_ops; struct fwnode_handle; struct device; @@ -157,6 +158,9 @@ void typec_port_register_altmodes(struct typec_port *port, const struct typec_altmode_ops *ops, void *drvdata, struct typec_altmode **altmodes, size_t n); +void typec_port_register_cable_ops(struct typec_altmode **altmodes, int max_altmodes, + const struct typec_cable_ops *ops); + void typec_unregister_altmode(struct typec_altmode *altmode); struct typec_port *typec_altmode2port(struct typec_altmode *alt); @@ -333,6 +337,9 @@ void typec_partner_set_svdm_version(struct typec_partner *partner, enum usb_pd_svdm_ver svdm_version); int typec_get_negotiated_svdm_version(struct typec_port *port); +int typec_get_cable_svdm_version(struct typec_port *port); +void typec_cable_set_svdm_version(struct typec_cable *cable, enum usb_pd_svdm_ver svdm_version); + struct usb_power_delivery *typec_partner_usb_power_delivery_register(struct typec_partner *partner, struct usb_power_delivery_desc *desc); diff --git a/include/linux/usb/typec_altmode.h b/include/linux/usb/typec_altmode.h index 28aeef8f9e7b5..b3c0866ea70f9 100644 --- a/include/linux/usb/typec_altmode.h +++ b/include/linux/usb/typec_altmode.h @@ -20,6 +20,7 @@ struct typec_altmode_ops; * @active: Tells has the mode been entered or not * @desc: Optional human readable description of the mode * @ops: Operations vector from the driver + * @cable_ops: Cable operations vector from the driver. */ struct typec_altmode { struct device dev; @@ -30,6 +31,7 @@ struct typec_altmode { char *desc; const struct typec_altmode_ops *ops; + const struct typec_cable_ops *cable_ops; }; #define to_typec_altmode(d) container_of(d, struct typec_altmode, dev) @@ -75,6 +77,34 @@ int typec_altmode_notify(struct typec_altmode *altmode, unsigned long conf, const struct typec_altmode * typec_altmode_get_partner(struct typec_altmode *altmode); +/** + * struct typec_cable_ops - Cable alternate mode operations vector + * @enter: Operations to be executed with Enter Mode Command + * @exit: Operations to be executed with Exit Mode Command + * @vdm: Callback for SVID specific commands + */ +struct typec_cable_ops { + int (*enter)(struct typec_altmode *altmode, enum typec_plug_index sop, u32 *vdo); + int (*exit)(struct typec_altmode *altmode, enum typec_plug_index sop); + int (*vdm)(struct typec_altmode *altmode, enum typec_plug_index sop, + const u32 hdr, const u32 *vdo, int cnt); +}; + +int typec_cable_altmode_enter(struct typec_altmode *altmode, enum typec_plug_index sop, u32 *vdo); +int typec_cable_altmode_exit(struct typec_altmode *altmode, enum typec_plug_index sop); +int typec_cable_altmode_vdm(struct typec_altmode *altmode, enum typec_plug_index sop, + const u32 header, const u32 *vdo, int count); + +/** + * typec_altmode_get_cable_svdm_version - Get negotiated SVDM version for cable plug + * @altmode: Handle to the alternate mode + */ +static inline int +typec_altmode_get_cable_svdm_version(struct typec_altmode *altmode) +{ + return typec_get_cable_svdm_version(typec_altmode2port(altmode)); +} + /* * These are the connector states (USB, Safe and Alt Mode) defined in USB Type-C * Specification. SVID specific connector states are expected to follow and diff --git a/include/linux/usb/typec_dp.h b/include/linux/usb/typec_dp.h index 1f358098522df..f2da264d9c140 100644 --- a/include/linux/usb/typec_dp.h +++ b/include/linux/usb/typec_dp.h @@ -3,6 +3,7 @@ #define __USB_TYPEC_DP_H #include <linux/usb/typec_altmode.h> +#include <linux/bitfield.h> #define USB_TYPEC_DP_SID 0xff01 /* USB IF has not assigned a Standard ID (SID) for VirtualLink, @@ -67,21 +68,21 @@ enum { #define DP_CAP_UFP_D 1 #define DP_CAP_DFP_D 2 #define DP_CAP_DFP_D_AND_UFP_D 3 -#define DP_CAP_DP_SIGNALLING(_cap_) (((_cap_) & GENMASK(5, 2)) >> 2) +#define DP_CAP_DP_SIGNALLING(_cap_) FIELD_GET(GENMASK(5, 2), _cap_) #define DP_CAP_SIGNALLING_HBR3 1 #define DP_CAP_SIGNALLING_UHBR10 2 #define DP_CAP_SIGNALLING_UHBR20 3 #define DP_CAP_RECEPTACLE BIT(6) #define DP_CAP_USB BIT(7) -#define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(15, 8)) >> 8) -#define DP_CAP_UFP_D_PIN_ASSIGN(_cap_) (((_cap_) & GENMASK(23, 16)) >> 16) +#define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) FIELD_GET(GENMASK(15, 8), _cap_) +#define DP_CAP_UFP_D_PIN_ASSIGN(_cap_) FIELD_GET(GENMASK(23, 16), _cap_) /* Get pin assignment taking plug & receptacle into consideration */ #define DP_CAP_PIN_ASSIGN_UFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \ DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_)) #define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \ DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_)) #define DP_CAP_UHBR_13_5_SUPPORT BIT(26) -#define DP_CAP_CABLE_TYPE(_cap_) (((_cap_) & GENMASK(29, 28)) >> 28) +#define DP_CAP_CABLE_TYPE(_cap_) FIELD_GET(GENMASK(29, 28), _cap_) #define DP_CAP_CABLE_TYPE_PASSIVE 0 #define DP_CAP_CABLE_TYPE_RE_TIMER 1 #define DP_CAP_CABLE_TYPE_RE_DRIVER 2 @@ -116,7 +117,7 @@ enum { /* Helper for setting/getting the pin assignment value to the configuration */ #define DP_CONF_SET_PIN_ASSIGN(_a_) ((_a_) << 8) -#define DP_CONF_GET_PIN_ASSIGN(_conf_) (((_conf_) & GENMASK(15, 8)) >> 8) +#define DP_CONF_GET_PIN_ASSIGN(_conf_) FIELD_GET(GENMASK(15, 8), _conf_) #define DP_CONF_UHBR13_5_SUPPORT BIT(26) #define DP_CONF_CABLE_TYPE_MASK GENMASK(29, 28) #define DP_CONF_CABLE_TYPE_SHIFT 28 diff --git a/include/linux/usb/typec_tbt.h b/include/linux/usb/typec_tbt.h index c7a2153bd6f50..fa97d7e00f5c7 100644 --- a/include/linux/usb/typec_tbt.h +++ b/include/linux/usb/typec_tbt.h @@ -3,6 +3,7 @@ #define __USB_TYPEC_TBT_H #include <linux/usb/typec_altmode.h> +#include <linux/bitfield.h> #define USB_TYPEC_VENDOR_INTEL 0x8087 /* Alias for convenience */ @@ -25,7 +26,7 @@ struct typec_thunderbolt_data { /* TBT3 Device Discover Mode VDO bits */ #define TBT_MODE BIT(0) -#define TBT_ADAPTER(_vdo_) (((_vdo_) & BIT(16)) >> 16) +#define TBT_ADAPTER(_vdo_) FIELD_GET(BIT(16), _vdo_) #define TBT_ADAPTER_LEGACY 0 #define TBT_ADAPTER_TBT3 1 #define TBT_INTEL_SPECIFIC_B0 BIT(26) @@ -35,12 +36,12 @@ struct typec_thunderbolt_data { #define TBT_SET_ADAPTER(a) (((a) & 1) << 16) /* TBT3 Cable Discover Mode VDO bits */ -#define TBT_CABLE_SPEED(_vdo_) (((_vdo_) & GENMASK(18, 16)) >> 16) +#define TBT_CABLE_SPEED(_vdo_) FIELD_GET(GENMASK(18, 16), _vdo_) #define TBT_CABLE_USB3_GEN1 1 #define TBT_CABLE_USB3_PASSIVE 2 #define TBT_CABLE_10_AND_20GBPS 3 -#define TBT_CABLE_ROUNDED_SUPPORT(_vdo_) \ - (((_vdo_) & GENMASK(20, 19)) >> 19) +#define TBT_CABLE_ROUNDED_SUPPORT(_vdo_) FIELD_GET(GENMASK(20, 19), _vdo_) + #define TBT_GEN3_NON_ROUNDED 0 #define TBT_GEN3_GEN4_ROUNDED_NON_ROUNDED 1 #define TBT_CABLE_OPTICAL BIT(21) diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h index 8a147abfc6806..44d73ba8788dc 100644 --- a/include/uapi/linux/usb/ch9.h +++ b/include/uapi/linux/usb/ch9.h @@ -763,6 +763,8 @@ struct usb_otg20_descriptor { #define USB_OTG_SRP (1 << 0) #define USB_OTG_HNP (1 << 1) /* swap host/device roles */ #define USB_OTG_ADP (1 << 2) /* support ADP */ +/* OTG 3.0 */ +#define USB_OTG_RSP (1 << 3) /* support RSP */ #define OTG_STS_SELECTOR 0xF000 /* OTG status selector */ /*-------------------------------------------------------------------------*/ diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h index 078098e73fd3e..9f88de9c3d660 100644 --- a/include/uapi/linux/usb/functionfs.h +++ b/include/uapi/linux/usb/functionfs.h @@ -86,6 +86,22 @@ struct usb_ext_prop_desc { __le16 wPropertyNameLength; } __attribute__((packed)); +/* Flags for usb_ffs_dmabuf_transfer_req->flags (none for now) */ +#define USB_FFS_DMABUF_TRANSFER_MASK 0x0 + +/** + * struct usb_ffs_dmabuf_transfer_req - Transfer request for a DMABUF object + * @fd: file descriptor of the DMABUF object + * @flags: one or more USB_FFS_DMABUF_TRANSFER_* flags + * @length: number of bytes used in this DMABUF for the data transfer. + * Should generally be set to the DMABUF's size. + */ +struct usb_ffs_dmabuf_transfer_req { + int fd; + __u32 flags; + __u64 length; +} __attribute__((packed)); + #ifndef __KERNEL__ /* @@ -290,6 +306,31 @@ struct usb_functionfs_event { #define FUNCTIONFS_ENDPOINT_DESC _IOR('g', 130, \ struct usb_endpoint_descriptor) +/* + * Attach the DMABUF object, identified by its file descriptor, to the + * data endpoint. Returns zero on success, and a negative errno value + * on error. + */ +#define FUNCTIONFS_DMABUF_ATTACH _IOW('g', 131, int) + +/* + * Detach the given DMABUF object, identified by its file descriptor, + * from the data endpoint. Returns zero on success, and a negative + * errno value on error. Note that closing the endpoint's file + * descriptor will automatically detach all attached DMABUFs. + */ +#define FUNCTIONFS_DMABUF_DETACH _IOW('g', 132, int) + +/* + * Enqueue the previously attached DMABUF to the transfer queue. + * The argument is a structure that packs the DMABUF's file descriptor, + * the size in bytes to transfer (which should generally correspond to + * the size of the DMABUF), and a 'flags' field which is unused + * for now. Returns zero on success, and a negative errno value on + * error. + */ +#define FUNCTIONFS_DMABUF_TRANSFER _IOW('g', 133, \ + struct usb_ffs_dmabuf_transfer_req) #endif /* _UAPI__LINUX_FUNCTIONFS_H__ */ diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index d117e8a96ded9..e1504833654db 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -13,6 +13,7 @@ TARGETS += core TARGETS += cpufreq TARGETS += cpu-hotplug TARGETS += damon +TARGETS += devices TARGETS += dmabuf-heaps TARGETS += drivers/dma-buf TARGETS += drivers/s390x/uvdevice diff --git a/tools/testing/selftests/devices/Makefile b/tools/testing/selftests/devices/Makefile new file mode 100644 index 0000000000000..ca29249b30c34 --- /dev/null +++ b/tools/testing/selftests/devices/Makefile @@ -0,0 +1,4 @@ +TEST_PROGS := test_discoverable_devices.py +TEST_FILES := boards ksft.py + +include ../lib.mk diff --git a/tools/testing/selftests/devices/boards/Dell Inc.,XPS 13 9300.yaml b/tools/testing/selftests/devices/boards/Dell Inc.,XPS 13 9300.yaml new file mode 100644 index 0000000000000..ff932eb19f0b1 --- /dev/null +++ b/tools/testing/selftests/devices/boards/Dell Inc.,XPS 13 9300.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# This is the device definition for the XPS 13 9300. +# The filename "Dell Inc.,XPS 13 9300" was chosen following the format +# "Vendor,Product", where Vendor comes from +# /sys/devices/virtual/dmi/id/sys_vendor, and Product comes from +# /sys/devices/virtual/dmi/id/product_name. +# +# See google,spherion.yaml for more information. +# +- type: pci-controller + # This machine has a single PCI host controller so it's valid to not have any + # key to identify the controller. If it had more than one controller, the UID + # of the controller from ACPI could be used to distinguish as follows: + #acpi-uid: 0 + devices: + - path: 14.0 + type: usb-controller + usb-version: 2 + devices: + - path: 9 + name: camera + interfaces: [0, 1, 2, 3] + - path: 10 + name: bluetooth + interfaces: [0, 1] + - path: 2.0 + name: gpu + - path: 4.0 + name: thermal + - path: 12.0 + name: sensors + - path: 14.3 + name: wifi + - path: 1d.0/0.0 + name: ssd + - path: 1d.7/0.0 + name: sdcard-reader + - path: 1f.3 + name: audio diff --git a/tools/testing/selftests/devices/boards/google,spherion.yaml b/tools/testing/selftests/devices/boards/google,spherion.yaml new file mode 100644 index 0000000000000..17157ecd8c142 --- /dev/null +++ b/tools/testing/selftests/devices/boards/google,spherion.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# This is the device definition for the Google Spherion Chromebook. +# The filename "google,spherion" comes from the Devicetree compatible, so this +# file will be automatically used when the test is run on that machine. +# +# The top-level is a list of controllers, either for USB or PCI(e). +# Every controller needs to have a 'type' key set to either 'usb-controller' or +# 'pci-controller'. +# Every controller needs to be uniquely identified on the platform. To achieve +# this, several optional keys can be used: +# - dt-mmio: identify the MMIO address of the controller as defined in the +# Devicetree. +# - usb-version: for USB controllers to differentiate between USB3 and USB2 +# buses sharing the same controller. +# - acpi-uid: _UID property of the controller as supplied by the ACPI. Useful to +# distinguish between multiple PCI host controllers. +# +# The 'devices' key defines a list of devices that are accessible under that +# controller. A device might be a leaf device or another controller (see +# 'Dell Inc.,XPS 13 9300.yaml'). +# +# The 'path' key is needed for every child device (that is, not top-level) to +# define how to reach this device from the parent controller. For USB devices it +# follows the format \d(.\d)* and denotes the port in the hub at each level in +# the USB topology. For PCI devices it follows the format \d.\d(/\d.\d)* +# denoting the device (identified by device-function pair) at each level in the +# PCI topology. +# +# The 'name' key is used in the leaf devices to name the device for clarity in +# the test output. +# +# For USB leaf devices, the 'interfaces' key should contain a list of the +# interfaces in that device that should be bound to a driver. +# +- type: usb-controller + dt-mmio: 11200000 + usb-version: 2 + devices: + - path: 1.4.1 + interfaces: [0, 1] + name: camera + - path: 1.4.2 + interfaces: [0, 1] + name: bluetooth +- type: pci-controller + dt-mmio: 11230000 + devices: + - path: 0.0/0.0 + name: wifi diff --git a/tools/testing/selftests/devices/ksft.py b/tools/testing/selftests/devices/ksft.py new file mode 100644 index 0000000000000..cd89fb2bc10e7 --- /dev/null +++ b/tools/testing/selftests/devices/ksft.py @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2023 Collabora Ltd +# +# Kselftest helpers for outputting in KTAP format. Based on kselftest.h. +# + +import sys + +ksft_cnt = {"pass": 0, "fail": 0, "skip": 0} +ksft_num_tests = 0 +ksft_test_number = 1 + +KSFT_PASS = 0 +KSFT_FAIL = 1 +KSFT_SKIP = 4 + + +def print_header(): + print("TAP version 13") + + +def set_plan(num_tests): + global ksft_num_tests + ksft_num_tests = num_tests + print("1..{}".format(num_tests)) + + +def print_cnts(): + print( + f"# Totals: pass:{ksft_cnt['pass']} fail:{ksft_cnt['fail']} xfail:0 xpass:0 skip:{ksft_cnt['skip']} error:0" + ) + + +def print_msg(msg): + print(f"# {msg}") + + +def _test_print(result, description, directive=None): + if directive: + directive_str = f"# {directive}" + else: + directive_str = "" + + global ksft_test_number + print(f"{result} {ksft_test_number} {description} {directive_str}") + ksft_test_number += 1 + + +def test_result_pass(description): + _test_print("ok", description) + ksft_cnt["pass"] += 1 + + +def test_result_fail(description): + _test_print("not ok", description) + ksft_cnt["fail"] += 1 + + +def test_result_skip(description): + _test_print("ok", description, "SKIP") + ksft_cnt["skip"] += 1 + + +def test_result(condition, description=""): + if condition: + test_result_pass(description) + else: + test_result_fail(description) + + +def finished(): + if ksft_cnt["pass"] == ksft_num_tests: + exit_code = KSFT_PASS + else: + exit_code = KSFT_FAIL + + print_cnts() + + sys.exit(exit_code) + + +def exit_fail(): + print_cnts() + sys.exit(KSFT_FAIL) + + +def exit_pass(): + print_cnts() + sys.exit(KSFT_PASS) diff --git a/tools/testing/selftests/devices/test_discoverable_devices.py b/tools/testing/selftests/devices/test_discoverable_devices.py new file mode 100755 index 0000000000000..fbae8deb593d5 --- /dev/null +++ b/tools/testing/selftests/devices/test_discoverable_devices.py @@ -0,0 +1,318 @@ +#!/usr/bin/python3 +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2023 Collabora Ltd +# +# This script tests for presence and driver binding of devices from discoverable +# buses (ie USB, PCI). +# +# The per-platform YAML file defining the devices to be tested is stored inside +# the boards/ directory and chosen based on DT compatible or DMI IDs (sys_vendor +# and product_name). +# +# See boards/google,spherion.yaml and boards/'Dell Inc.,XPS 13 9300.yaml' for +# the description and examples of the file structure and vocabulary. +# + +import glob +import ksft +import os +import re +import sys +import yaml + +pci_controllers = [] +usb_controllers = [] + +sysfs_usb_devices = "/sys/bus/usb/devices/" + + +def find_pci_controller_dirs(): + sysfs_devices = "/sys/devices" + pci_controller_sysfs_dir = "pci[0-9a-f]{4}:[0-9a-f]{2}" + + dir_regex = re.compile(pci_controller_sysfs_dir) + for path, dirs, _ in os.walk(sysfs_devices): + for d in dirs: + if dir_regex.match(d): + pci_controllers.append(os.path.join(path, d)) + + +def find_usb_controller_dirs(): + usb_controller_sysfs_dir = "usb[\d]+" + + dir_regex = re.compile(usb_controller_sysfs_dir) + for d in os.scandir(sysfs_usb_devices): + if dir_regex.match(d.name): + usb_controllers.append(os.path.realpath(d.path)) + + +def get_dt_mmio(sysfs_dev_dir): + re_dt_mmio = re.compile("OF_FULLNAME=.*@([0-9a-f]+)") + dt_mmio = None + + # PCI controllers' sysfs don't have an of_node, so have to read it from the + # parent + while not dt_mmio: + try: + with open(os.path.join(sysfs_dev_dir, "uevent")) as f: + dt_mmio = re_dt_mmio.search(f.read()).group(1) + return dt_mmio + except: + pass + sysfs_dev_dir = os.path.dirname(sysfs_dev_dir) + + +def get_acpi_uid(sysfs_dev_dir): + with open(os.path.join(sysfs_dev_dir, "firmware_node", "uid")) as f: + return f.read() + + +def get_usb_version(sysfs_dev_dir): + re_usb_version = re.compile("PRODUCT=.*/(\d)/.*") + with open(os.path.join(sysfs_dev_dir, "uevent")) as f: + return int(re_usb_version.search(f.read()).group(1)) + + +def get_usb_busnum(sysfs_dev_dir): + re_busnum = re.compile("BUSNUM=(.*)") + with open(os.path.join(sysfs_dev_dir, "uevent")) as f: + return int(re_busnum.search(f.read()).group(1)) + + +def find_controller_in_sysfs(controller, parent_sysfs=None): + if controller["type"] == "pci-controller": + controllers = pci_controllers + elif controller["type"] == "usb-controller": + controllers = usb_controllers + + result_controllers = [] + + for c in controllers: + if parent_sysfs and parent_sysfs not in c: + continue + + if controller.get("dt-mmio"): + if str(controller["dt-mmio"]) != get_dt_mmio(c): + continue + + if controller.get("usb-version"): + if controller["usb-version"] != get_usb_version(c): + continue + + if controller.get("acpi-uid"): + if controller["acpi-uid"] != get_acpi_uid(c): + continue + + result_controllers.append(c) + + return result_controllers + + +def is_controller(device): + return device.get("type") and "controller" in device.get("type") + + +def path_to_dir(parent_sysfs, dev_type, path): + if dev_type == "usb-device": + usb_dev_sysfs_fmt = "{}-{}" + busnum = get_usb_busnum(parent_sysfs) + dirname = os.path.join( + sysfs_usb_devices, usb_dev_sysfs_fmt.format(busnum, path) + ) + return [os.path.realpath(dirname)] + else: + pci_dev_sysfs_fmt = "????:??:{}" + path_glob = "" + for dev_func in path.split("/"): + dev_func = dev_func.zfill(4) + path_glob = os.path.join(path_glob, pci_dev_sysfs_fmt.format(dev_func)) + + dir_list = glob.glob(os.path.join(parent_sysfs, path_glob)) + + return dir_list + + +def find_in_sysfs(device, parent_sysfs=None): + if parent_sysfs and device.get("path"): + pathdirs = path_to_dir( + parent_sysfs, device["meta"]["type"], str(device["path"]) + ) + if len(pathdirs) != 1: + # Early return to report error + return pathdirs + pathdir = pathdirs[0] + sysfs_path = os.path.join(parent_sysfs, pathdir) + else: + sysfs_path = parent_sysfs + + if is_controller(device): + return find_controller_in_sysfs(device, sysfs_path) + else: + return [sysfs_path] + + +def check_driver_presence(sysfs_dir, current_node): + if current_node["meta"]["type"] == "usb-device": + usb_intf_fmt = "*-*:*.{}" + + interfaces = [] + for i in current_node["interfaces"]: + interfaces.append((i, usb_intf_fmt.format(i))) + + for intf_num, intf_dir_fmt in interfaces: + test_name = f"{current_node['meta']['pathname']}.{intf_num}.driver" + + intf_dirs = glob.glob(os.path.join(sysfs_dir, intf_dir_fmt)) + if len(intf_dirs) != 1: + ksft.test_result_fail(test_name) + continue + intf_dir = intf_dirs[0] + + driver_link = os.path.join(sysfs_dir, intf_dir, "driver") + ksft.test_result(os.path.isdir(driver_link), test_name) + else: + driver_link = os.path.join(sysfs_dir, "driver") + test_name = current_node["meta"]["pathname"] + ".driver" + ksft.test_result(os.path.isdir(driver_link), test_name) + + +def generate_pathname(device): + pathname = "" + + if device.get("path"): + pathname = str(device["path"]) + + if device.get("type"): + dev_type = device["type"] + if device.get("usb-version"): + dev_type = dev_type.replace("usb", "usb" + str(device["usb-version"])) + if device.get("acpi-uid") is not None: + dev_type = dev_type.replace("pci", "pci" + str(device["acpi-uid"])) + pathname = pathname + "/" + dev_type + + if device.get("dt-mmio"): + pathname += "@" + str(device["dt-mmio"]) + + if device.get("name"): + pathname = pathname + "/" + device["name"] + + return pathname + + +def fill_meta_keys(child, parent=None): + child["meta"] = {} + + if parent: + child["meta"]["type"] = parent["type"].replace("controller", "device") + + pathname = generate_pathname(child) + if parent: + pathname = parent["meta"]["pathname"] + "/" + pathname + child["meta"]["pathname"] = pathname + + +def parse_device_tree_node(current_node, parent_sysfs=None): + if not parent_sysfs: + fill_meta_keys(current_node) + + sysfs_dirs = find_in_sysfs(current_node, parent_sysfs) + if len(sysfs_dirs) != 1: + if len(sysfs_dirs) == 0: + ksft.test_result_fail( + f"Couldn't find in sysfs: {current_node['meta']['pathname']}" + ) + else: + ksft.test_result_fail( + f"Found multiple sysfs entries for {current_node['meta']['pathname']}: {sysfs_dirs}" + ) + return + sysfs_dir = sysfs_dirs[0] + + if not is_controller(current_node): + ksft.test_result( + os.path.exists(sysfs_dir), current_node["meta"]["pathname"] + ".device" + ) + check_driver_presence(sysfs_dir, current_node) + else: + for child_device in current_node["devices"]: + fill_meta_keys(child_device, current_node) + parse_device_tree_node(child_device, sysfs_dir) + + +def count_tests(device_trees): + test_count = 0 + + def parse_node(device): + nonlocal test_count + if device.get("devices"): + for child in device["devices"]: + parse_node(child) + else: + if device.get("interfaces"): + test_count += len(device["interfaces"]) + else: + test_count += 1 + test_count += 1 + + for device_tree in device_trees: + parse_node(device_tree) + + return test_count + + +def get_board_filenames(): + filenames = [] + + platform_compatible_file = "/proc/device-tree/compatible" + if os.path.exists(platform_compatible_file): + with open(platform_compatible_file) as f: + for line in f: + filenames.extend(line.split("\0")) + else: + dmi_id_dir = "/sys/devices/virtual/dmi/id" + vendor_dmi_file = os.path.join(dmi_id_dir, "sys_vendor") + product_dmi_file = os.path.join(dmi_id_dir, "product_name") + + with open(vendor_dmi_file) as f: + vendor = f.read().replace("\n", "") + with open(product_dmi_file) as f: + product = f.read().replace("\n", "") + + filenames = [vendor + "," + product] + + return filenames + + +def run_test(yaml_file): + ksft.print_msg(f"Using board file: {yaml_file}") + + with open(yaml_file) as f: + device_trees = yaml.safe_load(f) + + ksft.set_plan(count_tests(device_trees)) + + for device_tree in device_trees: + parse_device_tree_node(device_tree) + + +find_pci_controller_dirs() +find_usb_controller_dirs() + +ksft.print_header() + +board_file = "" +for board_filename in get_board_filenames(): + full_board_filename = os.path.join("boards", board_filename + ".yaml") + + if os.path.exists(full_board_filename): + board_file = full_board_filename + break + +if not board_file: + ksft.print_msg("No matching board file found") + ksft.exit_fail() + +run_test(board_file) + +ksft.finished() |