1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __USB_TYPEC_DP_H
#define __USB_TYPEC_DP_H
#include <linux/usb/typec_altmode.h>
#include <linux/bitfield.h>
#define USB_TYPEC_DP_SID 0xff01
/* USB IF has not assigned a Standard ID (SID) for VirtualLink,
* so the manufacturers of VirtualLink adapters use their Vendor
* IDs as the SVID.
*/
#define USB_TYPEC_NVIDIA_VLINK_SID 0x955 /* NVIDIA VirtualLink */
#define USB_TYPEC_DP_MODE 1
/*
* Connector states matching the pin assignments in DisplayPort Alt Mode
* Specification.
*
* These values are meant primarily to be used by the mux drivers, but they are
* also used as the "value" part in the alternate mode notification chain, so
* receivers of those notifications will always see them.
*
* Note. DisplayPort USB Type-C Alt Mode Specification version 1.0b deprecated
* pin assignments A, B and F, but they are still defined here for legacy
* purposes.
*/
enum {
TYPEC_DP_STATE_A = TYPEC_STATE_MODAL, /* Not supported after v1.0b */
TYPEC_DP_STATE_B, /* Not supported after v1.0b */
TYPEC_DP_STATE_C,
TYPEC_DP_STATE_D,
TYPEC_DP_STATE_E,
TYPEC_DP_STATE_F, /* Not supported after v1.0b */
};
/*
* struct typec_displayport_data - DisplayPort Alt Mode specific data
* @status: Status Update command VDO content
* @conf: Configure command VDO content
*
* This structure is delivered as the data part with the notifications. It
* contains the VDOs from the two DisplayPort Type-C alternate mode specific
* commands: Status Update and Configure.
*
* @status will show for example the status of the HPD signal.
*/
struct typec_displayport_data {
u32 status;
u32 conf;
};
enum {
DP_PIN_ASSIGN_A, /* Not supported after v1.0b */
DP_PIN_ASSIGN_B, /* Not supported after v1.0b */
DP_PIN_ASSIGN_C,
DP_PIN_ASSIGN_D,
DP_PIN_ASSIGN_E,
DP_PIN_ASSIGN_F, /* Not supported after v1.0b */
};
/* DisplayPort alt mode specific commands */
#define DP_CMD_STATUS_UPDATE VDO_CMD_VENDOR(0)
#define DP_CMD_CONFIGURE VDO_CMD_VENDOR(1)
/* DisplayPort Capabilities VDO bits (returned with Discover Modes) */
#define DP_CAP_CAPABILITY(_cap_) ((_cap_) & 3)
#define DP_CAP_UFP_D 1
#define DP_CAP_DFP_D 2
#define DP_CAP_DFP_D_AND_UFP_D 3
#define DP_CAP_DP_SIGNALLING(_cap_) FIELD_GET(GENMASK(5, 2), _cap_)
#define DP_CAP_SIGNALLING_HBR3 1
#define DP_CAP_SIGNALLING_UHBR10 2
#define DP_CAP_SIGNALLING_UHBR20 3
#define DP_CAP_RECEPTACLE BIT(6)
#define DP_CAP_USB BIT(7)
#define DP_CAP_DFP_D_PIN_ASSIGN(_cap_) FIELD_GET(GENMASK(15, 8), _cap_)
#define DP_CAP_UFP_D_PIN_ASSIGN(_cap_) FIELD_GET(GENMASK(23, 16), _cap_)
/* Get pin assignment taking plug & receptacle into consideration */
#define DP_CAP_PIN_ASSIGN_UFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \
DP_CAP_UFP_D_PIN_ASSIGN(_cap_) : DP_CAP_DFP_D_PIN_ASSIGN(_cap_))
#define DP_CAP_PIN_ASSIGN_DFP_D(_cap_) ((_cap_ & DP_CAP_RECEPTACLE) ? \
DP_CAP_DFP_D_PIN_ASSIGN(_cap_) : DP_CAP_UFP_D_PIN_ASSIGN(_cap_))
#define DP_CAP_UHBR_13_5_SUPPORT BIT(26)
#define DP_CAP_CABLE_TYPE(_cap_) FIELD_GET(GENMASK(29, 28), _cap_)
#define DP_CAP_CABLE_TYPE_PASSIVE 0
#define DP_CAP_CABLE_TYPE_RE_TIMER 1
#define DP_CAP_CABLE_TYPE_RE_DRIVER 2
#define DP_CAP_CABLE_TYPE_OPTICAL 3
#define DP_CAP_DPAM_VERSION BIT(30)
/* DisplayPort Status Update VDO bits */
#define DP_STATUS_CONNECTION(_status_) ((_status_) & 3)
#define DP_STATUS_CON_DISABLED 0
#define DP_STATUS_CON_DFP_D 1
#define DP_STATUS_CON_UFP_D 2
#define DP_STATUS_CON_BOTH 3
#define DP_STATUS_POWER_LOW BIT(2)
#define DP_STATUS_ENABLED BIT(3)
#define DP_STATUS_PREFER_MULTI_FUNC BIT(4)
#define DP_STATUS_SWITCH_TO_USB BIT(5)
#define DP_STATUS_EXIT_DP_MODE BIT(6)
#define DP_STATUS_HPD_STATE BIT(7) /* 0 = HPD_Low, 1 = HPD_High */
#define DP_STATUS_IRQ_HPD BIT(8)
/* DisplayPort Configurations VDO bits */
#define DP_CONF_CURRENTLY(_conf_) ((_conf_) & 3)
#define DP_CONF_UFP_U_AS_DFP_D BIT(0)
#define DP_CONF_UFP_U_AS_UFP_D BIT(1)
#define DP_CONF_SIGNALLING_MASK GENMASK(5, 2)
#define DP_CONF_SIGNALLING_SHIFT 2
#define DP_CONF_SIGNALLING_HBR3 1
#define DP_CONF_SIGNALLING_UHBR10 2
#define DP_CONF_SIGNALLING_UHBR20 3
#define DP_CONF_PIN_ASSIGNEMENT_SHIFT 8
#define DP_CONF_PIN_ASSIGNEMENT_MASK GENMASK(15, 8)
/* Helper for setting/getting the pin assignment value to the configuration */
#define DP_CONF_SET_PIN_ASSIGN(_a_) ((_a_) << 8)
#define DP_CONF_GET_PIN_ASSIGN(_conf_) FIELD_GET(GENMASK(15, 8), _conf_)
#define DP_CONF_UHBR13_5_SUPPORT BIT(26)
#define DP_CONF_CABLE_TYPE_MASK GENMASK(29, 28)
#define DP_CONF_CABLE_TYPE_SHIFT 28
#define DP_CONF_CABLE_TYPE_PASSIVE 0
#define DP_CONF_CABLE_TYPE_RE_TIMER 1
#define DP_CONF_CABLE_TYPE_RE_DRIVER 2
#define DP_CONF_CABLE_TYPE_OPTICAL 3
#define DP_CONF_DPAM_VERSION BIT(30)
#endif /* __USB_TYPEC_DP_H */
|
