Kernel driver npcm750-pwm-fan

Supported chips:

NUVOTON NPCM750/730/715/705



This driver implements support for NUVOTON NPCM7XX PWM and Fan Tacho controller. The PWM controller supports up to 8 PWM outputs. The Fan tacho controller supports up to 16 tachometer inputs.

The driver provides the following sensor accesses in sysfs:

fanX_input ro provide current fan rotation value in RPM as reported by the fan to the device.
pwmX rw get or set PWM fan control value. This is an integer value between 0(off) and 255(full speed).