Kernel driver ucd9000

Supported chips:

Author: Guenter Roeck <linux@roeck-us.net>

Description

From datasheets:

The UCD90120 Power Supply Sequencer and System Health Monitor monitors and sequences up to 12 independent voltage rails. The device integrates a 12-bit ADC with a 2.5V internal reference for monitoring up to 13 power supply voltage, current, or temperature inputs.

The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and system-health monitor. The device integrates a 12-bit ADC for monitoring up to 13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90124 offers support for fan control, margining, and general-purpose PWM functions.

The UCD90160 is a 16-rail PMBus/I2C addressable power-supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 16 power-supply voltage inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90160 offers support for margining, and general-purpose PWM functions.

The UCD90320 is a 32-rail PMBus/I2C addressable power-supply sequencer and monitor. The 24 integrated ADC channels (AMONx) monitor the power supply voltage, current, and temperature. Of the 84 GPIO pins, 8 can be used as digital monitors (DMONx), 32 to enable the power supply (ENx), 24 for margining (MARx), 16 for logical GPO, and 32 GPIs for cascading, and system function.

The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply voltage inputs. Twenty-three GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Ten of these pins offer PWM functionality. Using these pins, the UCD9090 offers support for margining, and general-purpose PWM functions.

The UCD90910 is a ten-rail I2C / PMBus addressable power-supply sequencer and system-health monitor. The device integrates a 12-bit ADC for monitoring up to 13 power-supply voltage, current, or temperature inputs.

This driver is a client driver to the core PMBus driver. Please see Kernel driver pmbus for details on PMBus client drivers.

Usage Notes

This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see How to instantiate I2C devices for details.

Platform data support

The driver supports standard PMBus driver platform data. Please see Kernel driver pmbus for details.

Sysfs entries

The following attributes are supported. Limits are read-write; all other attributes are read-only.

in[1-12]_label

“vout[1-12]”.

in[1-12]_input

Measured voltage. From READ_VOUT register.

in[1-12]_min

Minimum Voltage. From VOUT_UV_WARN_LIMIT register.

in[1-12]_max

Maximum voltage. From VOUT_OV_WARN_LIMIT register.

in[1-12]_lcrit

Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.

in[1-12]_crit

Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.

in[1-12]_min_alarm

Voltage low alarm. From VOLTAGE_UV_WARNING status.

in[1-12]_max_alarm

Voltage high alarm. From VOLTAGE_OV_WARNING status.

in[1-12]_lcrit_alarm

Voltage critical low alarm. From VOLTAGE_UV_FAULT status.

in[1-12]_crit_alarm

Voltage critical high alarm. From VOLTAGE_OV_FAULT status.

curr[1-12]_label

“iout[1-12]”.

curr[1-12]_input

Measured current. From READ_IOUT register.

curr[1-12]_max

Maximum current. From IOUT_OC_WARN_LIMIT register.

curr[1-12]_lcrit

Critical minimum output current. From IOUT_UC_FAULT_LIMIT register.

curr[1-12]_crit

Critical maximum current. From IOUT_OC_FAULT_LIMIT register.

curr[1-12]_max_alarm

Current high alarm. From IOUT_OC_WARNING status.

curr[1-12]_crit_alarm

Current critical high alarm. From IOUT_OC_FAULT status.

For each attribute index, either voltage or current is reported, but not both. If voltage or current is reported depends on the chip configuration.

temp[1-2]_input

Measured temperatures. From READ_TEMPERATURE_1 and READ_TEMPERATURE_2 registers.

temp[1-2]_max

Maximum temperature. From OT_WARN_LIMIT register.

temp[1-2]_crit

Critical high temperature. From OT_FAULT_LIMIT register.

temp[1-2]_max_alarm

Temperature high alarm.

temp[1-2]_crit_alarm

Temperature critical high alarm.

fan[1-4]_input

Fan RPM.

fan[1-4]_alarm

Fan alarm.

fan[1-4]_fault

Fan fault.

Fan attributes are only available on chips supporting fan control (UCD90124, UCD90910). Attribute files are created only for enabled fans. Note that even though UCD90910 supports up to 10 fans, only up to four fans are currently supported.