Kernel driver corsair-psu

Supported devices:

  • Corsair Power Supplies

    Corsair HX550i

    Corsair HX650i

    Corsair HX750i

    Corsair HX850i

    Corsair HX1000i

    Corsair HX1200i

    Corsair RM550i

    Corsair RM650i

    Corsair RM750i

    Corsair RM850i

    Corsair RM1000i

Author: Wilken Gottwalt

Description

This driver implements the sysfs interface for the Corsair PSUs with a HID protocol interface of the HXi and RMi series. These power supplies provide access to a micro-controller with 2 attached temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for power usage and 4 sensors for current levels and addtional non-sensor information like uptimes.

Sysfs entries

curr1_input

Total current usage

curr2_input

Current on the 12v psu rail

curr3_input

Current on the 5v psu rail

curr4_input

Current on the 3.3v psu rail

fan1_input

RPM of psu fan

in0_input

Voltage of the psu ac input

in1_input

Voltage of the 12v psu rail

in2_input

Voltage of the 5v psu rail

in3_input

Voltage of the 3.3 psu rail

power1_input

Total power usage

power2_input

Power usage of the 12v psu rail

power3_input

Power usage of the 5v psu rail

power4_input

Power usage of the 3.3v psu rail

temp1_input

Temperature of the psu vrm component

temp2_input

Temperature of the psu case

Usage Notes

It is an USB HID device, so it is auto-detected and supports hot-swapping.

Flickering values in the rail voltage levels can be an indicator for a failing PSU. The driver also provides some additional useful values via debugfs, which do not fit into the hwmon class.

Debugfs entries

uptime

Current uptime of the psu

uptime_total

Total uptime of the psu

vendor

Vendor name of the psu

product

Product name of the psu