Kernel driver hih6130¶
Honeywell HIH-6130 / HIH-6131
Addresses scanned: none
Datasheet: Publicly available at the Honeywell website
Iain Paton <email@example.com>
The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package. The difference between the two devices is that the HIH-6131 has a condensation filter.
The devices communicate with the I2C protocol. All sensors are set to the same I2C address 0x27 by default, so an entry with I2C_BOARD_INFO(“hih6130”, 0x27) can be used in the board setup code.
Please see How to instantiate I2C devices for details on how to instantiate I2C devices.
Command mode and alarms are not currently supported.