Kernel driver powr1220

Supported chips:

  • Lattice POWR1220AT8

    Prefix: ‘powr1220’

    Addresses scanned: none

    Datasheet: Publicly available at the Lattice website

Author: Scott Kanowitz <scott.kanowitz@gmail.com>

Description

This driver supports the Lattice POWR1220AT8 chip. The POWR1220 includes voltage monitoring for 14 inputs as well as trim settings for output voltages and GPIOs. This driver implements the voltage monitoring portion of the chip.

Voltages are sampled by a 12-bit ADC with a step size of 2 mV. An in-line attenuator allows measurements from 0 to 6 V. The attenuator is enabled or disabled depending on the setting of the input’s max value. The driver will enable the attenuator for any value over the low measurement range maximum of 2 V.

The input naming convention is as follows:

driver name

pin name

in0

VMON1

in1

VMON2

in2

VMON3

in2

VMON4

in4

VMON5

in5

VMON6

in6

VMON7

in7

VMON8

in8

VMON9

in9

VMON10

in10

VMON11

in11

VMON12

in12

VCCA

in13

VCCINP

The ADC readings are updated on request with a minimum period of 1s.