| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core:
- IOMMU memory usage observability - This will make the memory used
for IO page tables explicitly visible.
- Simplify arch_setup_dma_ops()
Intel VT-d:
- Consolidate domain cache invalidation
- Remove private data from page fault message
- Allocate DMAR fault interrupts locally
- Cleanup and refactoring
ARM-SMMUv2:
- Support for fault debugging hardware on Qualcomm implementations
- Re-land support for the ->domain_alloc_paging() callback
ARM-SMMUv3:
- Improve handling of MSI allocation failure
- Drop support for the "disable_bypass" cmdline option
- Major rework of the CD creation code, following on directly from
the STE rework merged last time around.
- Add unit tests for the new STE/CD manipulation logic
AMD-Vi:
- Final part of SVA changes with generic IO page fault handling
Renesas IPMMU:
- Add support for R8A779H0 hardware
... and a couple smaller fixes and updates across the sub-tree"
* tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits)
iommu/arm-smmu-v3: Make the kunit into a module
arm64: Properly clean up iommu-dma remnants
iommu/amd: Enable Guest Translation after reading IOMMU feature register
iommu/vt-d: Decouple igfx_off from graphic identity mapping
iommu/amd: Fix compilation error
iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry
iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()
iommu/arm-smmu-v3: Move the CD generation for SVA into a function
iommu/arm-smmu-v3: Allocate the CD table entry in advance
iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr()
iommu/arm-smmu-v3: Consolidate clearing a CD table entry
iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function
iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry()
iommu/arm-smmu-v3: Add an ops indirection to the STE code
iommu/arm-smmu-qcom: Don't build debug features as a kernel module
iommu/amd: Add SVA domain support
iommu: Add ops->domain_alloc_sva()
iommu/amd: Initial SVA support for AMD IOMMU
iommu/amd: Add support for enable/disable IOPF
iommu/amd: Add IO page fault notifier handler
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- tracing/probes: Add new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'
- uprobes performance optimizations:
- Speed up the BPF uprobe event by delaying the fetching of the
uprobe event arguments that are not used in BPF
- Avoid locking by speculatively checking whether uprobe event is
valid
- Reduce lock contention by using read/write_lock instead of
spinlock for uprobe list operation. This improved BPF uprobe
benchmark result 43% on average
- rethook: Remove non-fatal warning messages when tracing stack from
BPF and skip rcu_is_watching() validation in rethook if possible
- objpool: Optimize objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching
nr_cpu_ids because it is a const value
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace
* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobe/ftrace: bail out if ftrace was killed
selftests/ftrace: Fix required features for VFS type test case
objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
objpool: enable inlining objpool_push() and objpool_pop() operations
rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
ftrace: make extra rcu_is_watching() validation check optional
uprobes: reduce contention on uprobes_tree access
rethook: Remove warning messages printed for finding return address of a frame.
fprobe: Add entry/exit callbacks types
selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
Documentation: tracing: add new type '%pd' and '%pD' for kprobe
tracing/probes: support '%pD' type for print struct file's name
tracing/probes: support '%pd' type for print struct dentry's name
uprobes: add speculative lockless system-wide uprobe filter check
uprobes: prepare uprobe args buffer lazily
uprobes: encapsulate preparation of uprobe args buffer
|
|
If an error happens in ftrace, ftrace_kill() will prevent disarming
kprobes. Eventually, the ftrace_ops associated with the kprobes will be
freed, yet the kprobes will still be active, and when triggered, they
will use the freed memory, likely resulting in a page fault and panic.
This behavior can be reproduced quite easily, by creating a kprobe and
then triggering a ftrace_kill(). For simplicity, we can simulate an
ftrace error with a kernel module like [1]:
[1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer
sudo perf probe --add commit_creds
sudo perf trace -e probe:commit_creds
# In another terminal
make
sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug
# Back to perf terminal
# ctrl-c
sudo perf probe --del commit_creds
After a short period, a page fault and panic would occur as the kprobe
continues to execute and uses the freed ftrace_ops. While ftrace_kill()
is supposed to be used only in extreme circumstances, it is invoked in
FTRACE_WARN_ON() and so there are many places where an unexpected bug
could be triggered, yet the system may continue operating, possibly
without the administrator noticing. If ftrace_kill() does not panic the
system, then we should do everything we can to continue operating,
rather than leave a ticking time bomb.
Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Pull KVM updates from Paolo Bonzini:
"ARM:
- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.
- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
LoongArch:
- Add ParaVirt IPI support
- Add software breakpoint support
- Add mmio trace events support
RISC-V:
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
- Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.
x86:
- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.
This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.
This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.
- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- As usual, a bunch of code cleanups.
x86 (AMD):
- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.
The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.
- Support for GHCB version 2 as applicable to SEV-ES guests.
This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.
x86 (Intel):
- An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.
- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.
Generic:
- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().
- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.
The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.
Selftests:
- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.
If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.
- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.
- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.
Documentation:
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded
execmem_alloc() and execmem_free() so to make emphasis these helpers
are actually used outside of modules.
It starts with a non-functional changes API rename / placeholders to
then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges.
Archs now can intitialize this execmem_info as the last part of
mm_core_init() if they have to diverge from the norm. Each range is a
known type clearly articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future
enhancements an immediate clear gain is we get to enable KPROBES
without MODULES now. That is ultimately what motiviated to pick this
work up again, now with smaller goal as concrete stepping stone"
* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
kprobes: remove dependency on CONFIG_MODULES
powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
arch: make execmem setup available regardless of CONFIG_MODULES
powerpc: extend execmem_params for kprobes allocations
arm64: extend execmem_info for generated code allocations
riscv: extend execmem_params for generated code allocations
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
mm/execmem, arch: convert simple overrides of module_alloc to execmem
mm: introduce execmem_alloc() and execmem_free()
module: make module_memory_{alloc,free} more self-contained
sparc: simplify module_alloc()
nios2: define virtual address space for modules
mips: module: rename MODULE_START to MODULES_VADDR
arm64: module: remove unneeded call to kasan_alloc_module_shadow()
kallsyms: replace deprecated strncpy with strscpy
module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Use no_printk() instead of "if (0) printk()" constructs to avoid
generating printk index for messages disabled at compile time
- Remove deprecated strncpy/strcpy from printk.c
- Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL
* tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: cleanup deprecated uses of strncpy/strcpy
printk: Remove redundant CONFIG_BASE_FULL
printk: Change type of CONFIG_BASE_SMALL to bool
printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
ceph: Use no_printk() helper
dyndbg: Use *no_printk() helpers
dev_printk: Add and use dev_no_printk()
printk: Let no_printk() use _printk()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU
- The usual small cleanups
Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place"
* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...
|
|
Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.
Remove redundant variables.
Note:
This commit changes the coverage for some objects:
- include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
- include arch/sparc/vdso/vdso-image-*.o into UBSAN
- include arch/sparc/vdso/vma.o into UBSAN
- include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
- include arch/x86/entry/vdso/vma.o into GCOV, KCOV
- include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV
I believe these are positive effects because all of them are kernel
space objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
|
|
execmem does not depend on modules, on the contrary modules use
execmem.
To make execmem available when CONFIG_MODULES=n, for instance for
kprobes, split execmem_params initialization out from
arch/*/kernel/module.c and compile it when CONFIG_EXECMEM=y
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The memory allocations for kprobes and BPF on RISC-V are not placed in
the modules area and these custom allocations are implemented with
overrides of alloc_insn_page() and bpf_jit_alloc_exec().
Define MODULES_VADDR and MODULES_END as VMALLOC_START and VMALLOC_END for
32 bit and slightly reorder execmem_params initialization to support both
32 and 64 bit variants, define EXECMEM_KPROBES and EXECMEM_BPF ranges in
riscv::execmem_params and drop overrides of alloc_insn_page() and
bpf_jit_alloc_exec().
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Several architectures override module_alloc() only to define address
range for code allocations different than VMALLOC address space.
Provide a generic implementation in execmem that uses the parameters for
address space ranges, required alignment and page protections provided
by architectures.
The architectures must fill execmem_info structure and implement
execmem_arch_setup() that returns a pointer to that structure. This way the
execmem initialization won't be called from every architecture, but rather
from a central place, namely a core_initcall() in execmem.
The execmem provides execmem_alloc() API that wraps __vmalloc_node_range()
with the parameters defined by the architectures. If an architecture does
not implement execmem_arch_setup(), execmem_alloc() will fall back to
module_alloc().
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-13
We've added 119 non-merge commits during the last 14 day(s) which contain
a total of 134 files changed, 9462 insertions(+), 4742 deletions(-).
The main changes are:
1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi.
2) Add BPF range computation improvements to the verifier in particular
around XOR and OR operators, refactoring of checks for range computation
and relaxing MUL range computation so that src_reg can also be an unknown
scalar, from Cupertino Miranda.
3) Add support to attach kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. Session mode is a common use-case for tetragon and bpftrace,
from Jiri Olsa.
4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf
as well as BPF selftest's struct_ops handling, from Andrii Nakryiko.
5) Improvements to BPF selftests in context of BPF gcc backend,
from Jose E. Marchesi & David Faust.
6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test-
-style in order to retire the old test, run it in BPF CI and additionally
expand test coverage, from Jordan Rife.
7) Big batch for BPF selftest refactoring in order to remove duplicate code
around common network helpers, from Geliang Tang.
8) Another batch of improvements to BPF selftests to retire obsolete
bpf_tcp_helpers.h as everything is available vmlinux.h,
from Martin KaFai Lau.
9) Fix BPF map tear-down to not walk the map twice on free when both timer
and wq is used, from Benjamin Tissoires.
10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL,
from Alexei Starovoitov.
11) Change BTF build scripts to using --btf_features for pahole v1.26+,
from Alan Maguire.
12) Small improvements to BPF reusing struct_size() and krealloc_array(),
from Andy Shevchenko.
13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions,
from Ilya Leoshkevich.
14) Extend TCP ->cong_control() callback in order to feed in ack and
flag parameters and allow write-access to tp->snd_cwnd_stamp
from BPF program, from Miao Xu.
15) Add support for internal-only per-CPU instructions to inline
bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs,
from Puranjay Mohan.
16) Follow-up to remove the redundant ethtool.h from tooling infrastructure,
from Tushar Vyavahare.
17) Extend libbpf to support "module:<function>" syntax for tracing
programs, from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
bpf: make list_for_each_entry portable
bpf: ignore expected GCC warning in test_global_func10.c
bpf: disable strict aliasing in test_global_func9.c
selftests/bpf: Free strdup memory in xdp_hw_metadata
selftests/bpf: Fix a few tests for GCC related warnings.
bpf: avoid gcc overflow warning in test_xdp_vlan.c
tools: remove redundant ethtool.h from tooling infra
selftests/bpf: Expand ATTACH_REJECT tests
selftests/bpf: Expand getsockname and getpeername tests
sefltests/bpf: Expand sockaddr hook deny tests
selftests/bpf: Expand sockaddr program return value tests
selftests/bpf: Retire test_sock_addr.(c|sh)
selftests/bpf: Remove redundant sendmsg test cases
selftests/bpf: Migrate ATTACH_REJECT test cases
selftests/bpf: Migrate expected_attach_type tests
selftests/bpf: Migrate wildcard destination rewrite test
selftests/bpf: Migrate sendmsg6 v4 mapped address tests
selftests/bpf: Migrate sendmsg deny test cases
selftests/bpf: Migrate WILDCARD_IP test
selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases
...
====================
Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.
Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console and a
few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"
* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...
|
|
into next
|
|
The BPF atomic operations with the BPF_FETCH modifier along with
BPF_XCHG and BPF_CMPXCHG are fully ordered but the RISC-V JIT implements
all atomic operations except BPF_CMPXCHG with relaxed ordering.
Section 8.1 of the "The RISC-V Instruction Set Manual Volume I:
Unprivileged ISA" [1], titled, "Specifying Ordering of Atomic
Instructions" says:
| To provide more efficient support for release consistency [5], each
| atomic instruction has two bits, aq and rl, used to specify additional
| memory ordering constraints as viewed by other RISC-V harts.
and
| If only the aq bit is set, the atomic memory operation is treated as
| an acquire access.
| If only the rl bit is set, the atomic memory operation is treated as a
| release access.
|
| If both the aq and rl bits are set, the atomic memory operation is
| sequentially consistent.
Fix this by setting both aq and rl bits as 1 for operations with
BPF_FETCH and BPF_XCHG.
[1] https://riscv.org/wp-content/uploads/2017/05/riscv-spec-v2.2.pdf
Fixes: dd642ccb45ec ("riscv, bpf: Implement more atomic operations for RV64")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240505201633.123115-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
We can use either "instruction" or "insn" in the comment.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240507111618.437121-1-xiao.w.wang@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Inline the calls to bpf_get_smp_processor_id() in the riscv bpf jit.
RISCV saves the pointer to the CPU's task_struct in the TP (thread
pointer) register. This makes it trivial to get the CPU's processor id.
As thread_info is the first member of task_struct, we can read the
processor id from TP + offsetof(struct thread_info, cpu).
RISCV64 JIT output for `call bpf_get_smp_processor_id`
======================================================
Before After
-------- -------
auipc t1,0x848c ld a5,32(tp)
jalr 604(t1)
mv a5,a0
Benchmark using [1] on Qemu.
./benchs/run_bench_trigger.sh glob-arr-inc arr-inc hash-inc
+---------------+------------------+------------------+--------------+
| Name | Before | After | % change |
|---------------+------------------+------------------+--------------|
| glob-arr-inc | 1.077 ± 0.006M/s | 1.336 ± 0.010M/s | + 24.04% |
| arr-inc | 1.078 ± 0.002M/s | 1.332 ± 0.015M/s | + 23.56% |
| hash-inc | 0.494 ± 0.004M/s | 0.653 ± 0.001M/s | + 32.18% |
+---------------+------------------+------------------+--------------+
NOTE: This benchmark includes changes from this patch and the previous
patch that implemented the per-cpu insn.
[1] https://github.com/anakryiko/linux/commit/8dec900975ef
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20240502151854.9810-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Support an instruction for resolving absolute addresses of per-CPU
data from their per-CPU offsets. This instruction is internal-only and
users are not allowed to use them directly. They will only be used for
internal inlining optimizations for now between BPF verifier and BPF
JITs.
RISC-V uses generic per-cpu implementation where the offsets for CPUs
are kept in an array called __per_cpu_offset[cpu_number]. RISCV stores
the address of the task_struct in TP register. The first element in
task_struct is struct thread_info, and we can get the cpu number by
reading from the TP register + offsetof(struct thread_info, cpu).
Once we have the cpu number in a register we read the offset for that
cpu from address: &__per_cpu_offset + cpu_number << 3. Then we add this
offset to the destination register.
To measure the improvement from this change, the benchmark in [1] was
used on Qemu:
Before:
glob-arr-inc : 1.127 ± 0.013M/s
arr-inc : 1.121 ± 0.004M/s
hash-inc : 0.681 ± 0.052M/s
After:
glob-arr-inc : 1.138 ± 0.011M/s
arr-inc : 1.366 ± 0.006M/s
hash-inc : 0.676 ± 0.001M/s
[1] https://github.com/anakryiko/linux/commit/8dec900975ef
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20240502151854.9810-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.10
1. Add ParaVirt IPI support.
2. Add software breakpoint support.
3. Add mmio trace events support.
|
|
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
KVM/riscv changes for 6.10
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC Kconfig Updates for v6.10
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: config: enable ARCH_CANAAN in defconfig
RISC-V: drop SOC_VIRT for ARCH_VIRT
RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
RISC-V: Drop unused SOC_CANAAN
reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
CONFIG_BASE_FULL is equivalent to !CONFIG_BASE_SMALL and is enabled by
default: CONFIG_BASE_SMALL is the special case to take care of.
So, remove CONFIG_BASE_FULL and move the config choice to
CONFIG_BASE_SMALL (which defaults to 'n')
For defconfigs explicitely disabling BASE_FULL, explicitely enable
BASE_SMALL.
For defconfigs explicitely enabling BASE_FULL, drop it as it is the
default.
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240505080343.1471198-4-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a0c ("bpf: verifier: prevent userspace memory access")
d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
|
|
into soc/dt
RISC-V Devicetrees for v6.10
Sophgo:
Added sdhci support for cv18xx/duo.
Added clock support for cv18xx.
Added clock for uart/sdhci.
Added spi support for cv18xx.
Added i2c support for cv18xx.
Added reserved memory node for cv1800b/duo.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.10' of https://github.com/sophgo/linux:
riscv: dts: sophgo: add reserved memory node for CV1800B
riscv: dts: sophgo: use real clock for sdhci
riscv: dts: sophgo: cv18xx: Add i2c devices
riscv: dts: sophgo: cv18xx: Add spi devices
riscv: dts: sophgo: add uart clock for Sophgo CV1800 series SoC
riscv: dts: sophgo: add clock generator for Sophgo CV1800 series SoC
riscv: dts: sophgo: add sdcard support for milkv duo
Link: https://lore.kernel.org/r/MA0P287MB2822CA2DE757787D6EA3B1F8FE192@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.10 (take two)
- Add external interrupt (IRQC) support for the RZ/Five SoC,
- Add SPI (MSIOF), external interrupt (INTC-EX), and IOMMU support for
the R-Car V4M SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779h0: Link IOMMU consumers
arm64: dts: renesas: r8a779h0: Add IPMMU nodes
arm64: dts: renesas: r8a779h0: Add INTC-EX node
arm64: dts: renesas: r8a779h0: Add MSIOF nodes
arm64: dts: renesas: rzg3s-smarc-som: Enable eMMC by default
riscv: dts: renesas: rzfive-smarc-som: Drop deleting interrupt properties from ETH0/1 nodes
arm64: dts: renesas: r9a07g043: Move interrupt-parent property to common DTSI
riscv: dts: renesas: r9a07g043f: Add IRQC node to RZ/Five SoC DTSI
arm64: dts: renesas: s4sk: Fix ethernet0 alias
Link: https://lore.kernel.org/r/cover.1714116737.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-26
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 14 files changed, 168 insertions(+), 72 deletions(-).
The main changes are:
1) Fix BPF_PROBE_MEM in verifier and JIT to skip loads from vsyscall page,
from Puranjay Mohan.
2) Fix a crash in XDP with devmap broadcast redirect when the latter map
is in process of being torn down, from Toke Høiland-Jørgensen.
3) Fix arm64 and riscv64 BPF JITs to properly clear start time for BPF
program runtime stats, from Xu Kuohai.
4) Fix a sockmap KCSAN-reported data race in sk_psock_skb_ingress_enqueue,
from Jason Xing.
5) Fix BPF verifier error message in resolve_pseudo_ldimm64,
from Anton Protopopov.
6) Fix missing DEBUG_INFO_BTF_MODULES Kconfig menu item,
from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test PROBE_MEM of VSYSCALL_ADDR on x86-64
bpf, x86: Fix PROBE_MEM runtime load check
bpf: verifier: prevent userspace memory access
xdp: use flags field to disambiguate broadcast redirect
arm32, bpf: Reimplement sign-extension mov instruction
riscv, bpf: Fix incorrect runtime stats
bpf, arm64: Fix incorrect runtime stats
bpf: Fix a verifier verbose message
bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue
MAINTAINERS: bpf: Add Lehui and Puranjay as riscv64 reviewers
MAINTAINERS: Update email address for Puranjay Mohan
bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition
====================
Link: https://lore.kernel.org/r/20240426224248.26197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Christoph Müllner <christoph.muellner@vrull.eu> says:
Currently, the Linux kernel suffers from a boot regression when running
on the c906 QEMU emulation. Details have been reported here by Björn Töpel:
https://lists.gnu.org/archive/html/qemu-devel/2024-01/msg04766.html
The main issue is, that Linux enables XTheadMae for CPUs that have a T-Head
mvendorid but QEMU maintainers don't want to emulate a CPU that uses
reserved bits in PTEs. See also the following discussion for more
context:
https://lists.gnu.org/archive/html/qemu-devel/2024-02/msg00775.html
This series renames "T-Head PBMT" to "MAE"/"XTheadMae" and only enables
it if the th.sxstatus.MAEE bit is set.
The th.sxstatus CSR is documented here:
https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadsxstatus.adoc
XTheadMae is documented here:
https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadmae.adoc
The QEMU patch to emulate th.sxstatus with the MAEE bit not set is here:
https://lore.kernel.org/all/20240329120427.684677-1-christoph.muellner@vrull.eu/
After applying the referenced QEMU patch, this patchset allows to
successfully boot a C906 QEMU system emulation ("-cpu thead-c906").
* b4-shazam-lts:
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
Link: https://lore.kernel.org/r/20240407213236.2121592-1-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The dma_base, size and iommu arguments are only used by ARM, and can
now easily be deduced from the device itself, so there's no need to pass
them through the callchain as well.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com> # For Hyper-V
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/5291c2326eab405b1aa7693aa964e8d3cb7193de.1713523152.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Rename the function to indicate that it is meant for firmware
counter read. While at it, add a range sanity check for it as
well.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-17-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The SBI v2.0 introduced a fw_read_hi function to read 64 bit firmware
counters for RV32 based systems.
Add infrastructure to support that.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-16-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
KVM enables perf for guest via counter virtualization. However, the
sampling can not be supported as there is no mechanism to enabled
trap/emulate scountovf in ISA yet. Rely on the SBI PMU snapshot
to provide the counter overflow data via the shared memory.
In case of sampling event, the host first sets the guest's LCOFI
interrupt and injects to the guest via irq filtering mechanism defined
in AIA specification. Thus, ssaia must be enabled in the host in order
to use perf sampling in the guest. No other AIA dependency w.r.t kernel
is required.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-15-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
PMU Snapshot function allows to minimize the number of traps when the
guest access configures/access the hpmcounters. If the snapshot feature
is enabled, the hypervisor updates the shared memory with counter
data and state of overflown counters. The guest can just read the
shared memory instead of trap & emulate done by the hypervisor.
This patch doesn't implement the counter overflow yet.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-14-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Currently, we return a linux error code if creating a perf event failed
in kvm. That shouldn't be necessary as guest can continue to operate
without perf profiling or profiling with firmware counters.
Return appropriate SBI error code to indicate that PMU configuration
failed. An error message in kvm already describes the reason for failure.
Fixes: 0cb74b65d2e5 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-13-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The virtual counter value is updated during pmu_ctr_read. There is no need
to update it in reset case. Otherwise, it will be counted twice which is
incorrect.
Fixes: 0cb74b65d2e5 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-12-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The initial sample period value when counter value is not assigned
should be set to maximum value supported by the counter width.
Otherwise, it may result in spurious interrupts.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-11-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Nowadays, we call it "GUP-fast", the external interface includes functions
like "get_user_pages_fast()", and we renamed all internal functions to
reflect that as well.
Let's make the config option reflect that.
Link: https://lkml.kernel.org/r/20240402125516.223131-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The access_error() of vma already checked under per-VMA lock, if it is a
bad access, directly handle error, no need to retry with mmap_lock again.
Since the page faut is handled under per-VMA lock, count it as a vma lock
event with VMA_LOCK_SUCCESS.
[wangkefeng.wang@huawei.com: use `cause' rather than SIGSEGV, per Alexandre]
Link: https://lkml.kernel.org/r/ac978061-ce1a-40a4-8b0a-61883b42bea7@huawei.com
Link: https://lkml.kernel.org/r/20240403083805.1818160-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The comment in the code explains the reasons. We took a different
approach comparing to pmd_pfn() by providing a fallback function.
Another option is to provide some lower level config options (compare to
HUGETLB_PAGE or THP) to identify which layer an arch can support for such
huge mappings. However that can be an overkill.
[peterx@redhat.com: fix loongson defconfig]
Link: https://lkml.kernel.org/r/20240403013249.1418299-4-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240327152332.950956-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All implementations that aren't no-ops just set a bit in the flags, and we
want to use the folio flags rather than the page flags for that. Rename
it to arch_clear_hugetlb_flags() while we're touching it so nobody thinks
it's used for THP.
[willy@infradead.org: fix arm64 build]
Link: https://lkml.kernel.org/r/ZgQvNKGdlDkwhQEX@casper.infradead.org
Link: https://lkml.kernel.org/r/20240326171045.410737-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Memory allocation profiling", v6.
Overview:
Low overhead [1] per-callsite memory allocation profiling. Not just for
debug kernels, overhead low enough to be deployed in production.
Example output:
root@moria-kvm:~# sort -rn /proc/allocinfo
127664128 31168 mm/page_ext.c:270 func:alloc_page_ext
56373248 4737 mm/slub.c:2259 func:alloc_slab_page
14880768 3633 mm/readahead.c:247 func:page_cache_ra_unbounded
14417920 3520 mm/mm_init.c:2530 func:alloc_large_system_hash
13377536 234 block/blk-mq.c:3421 func:blk_mq_alloc_rqs
11718656 2861 mm/filemap.c:1919 func:__filemap_get_folio
9192960 2800 kernel/fork.c:307 func:alloc_thread_stack_node
4206592 4 net/netfilter/nf_conntrack_core.c:2567 func:nf_ct_alloc_hashtable
4136960 1010 drivers/staging/ctagmod/ctagmod.c:20 [ctagmod] func:ctagmod_start
3940352 962 mm/memory.c:4214 func:alloc_anon_folio
2894464 22613 fs/kernfs/dir.c:615 func:__kernfs_new_node
...
Usage:
kconfig options:
- CONFIG_MEM_ALLOC_PROFILING
- CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT
- CONFIG_MEM_ALLOC_PROFILING_DEBUG
adds warnings for allocations that weren't accounted because of a
missing annotation
sysctl:
/proc/sys/vm/mem_profiling
Runtime info:
/proc/allocinfo
Notes:
[1]: Overhead
To measure the overhead we are comparing the following configurations:
(1) Baseline with CONFIG_MEMCG_KMEM=n
(2) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n)
(3) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y)
(4) Enabled at runtime (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n && /proc/sys/vm/mem_profiling=1)
(5) Baseline with CONFIG_MEMCG_KMEM=y && allocating with __GFP_ACCOUNT
(6) Disabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=n) && CONFIG_MEMCG_KMEM=y
(7) Enabled by default (CONFIG_MEM_ALLOC_PROFILING=y &&
CONFIG_MEM_ALLOC_PROFILING_BY_DEFAULT=y) && CONFIG_MEMCG_KMEM=y
Performance overhead:
To evaluate performance we implemented an in-kernel test executing
multiple get_free_page/free_page and kmalloc/kfree calls with allocation
sizes growing from 8 to 240 bytes with CPU frequency set to max and CPU
affinity set to a specific CPU to minimize the noise. Below are results
from running the test on Ubuntu 22.04.2 LTS with 6.8.0-rc1 kernel on
56 core Intel Xeon:
kmalloc pgalloc
(1 baseline) 6.764s 16.902s
(2 default disabled) 6.793s (+0.43%) 17.007s (+0.62%)
(3 default enabled) 7.197s (+6.40%) 23.666s (+40.02%)
(4 runtime enabled) 7.405s (+9.48%) 23.901s (+41.41%)
(5 memcg) 13.388s (+97.94%) 48.460s (+186.71%)
(6 def disabled+memcg) 13.332s (+97.10%) 48.105s (+184.61%)
(7 def enabled+memcg) 13.446s (+98.78%) 54.963s (+225.18%)
Memory overhead:
Kernel size:
text data bss dec diff
(1) 26515311 18890222 17018880 62424413
(2) 26524728 19423818 16740352 62688898 264485
(3) 26524724 19423818 16740352 62688894 264481
(4) 26524728 19423818 16740352 62688898 264485
(5) 26541782 18964374 16957440 62463596 39183
Memory consumption on a 56 core Intel CPU with 125GB of memory:
Code tags: 192 kB
PageExts: 262144 kB (256MB)
SlabExts: 9876 kB (9.6MB)
PcpuExts: 512 kB (0.5MB)
Total overhead is 0.2% of total memory.
Benchmarks:
Hackbench tests run 100 times:
hackbench -s 512 -l 200 -g 15 -f 25 -P
baseline disabled profiling enabled profiling
avg 0.3543 0.3559 (+0.0016) 0.3566 (+0.0023)
stdev 0.0137 0.0188 0.0077
hackbench -l 10000
baseline disabled profiling enabled profiling
avg 6.4218 6.4306 (+0.0088) 6.5077 (+0.0859)
stdev 0.0933 0.0286 0.0489
stress-ng tests:
stress-ng --class memory --seq 4 -t 60
stress-ng --class cpu --seq 4 -t 60
Results posted at: https://evilpiepirate.org/~kent/memalloc_prof_v4_stress-ng/
[2] https://lore.kernel.org/all/20240306182440.2003814-1-surenb@google.com/
This patch (of 37):
The next patch drops vmalloc.h from a system header in order to fix a
circular dependency; this adds it to all the files that were pulling it in
implicitly.
[kent.overstreet@linux.dev: fix arch/alpha/lib/memcpy.c]
Link: https://lkml.kernel.org/r/20240327002152.3339937-1-kent.overstreet@linux.dev
[surenb@google.com: fix arch/x86/mm/numa_32.c]
Link: https://lkml.kernel.org/r/20240402180933.1663992-1-surenb@google.com
[kent.overstreet@linux.dev: a few places were depending on sizes.h]
Link: https://lkml.kernel.org/r/20240404034744.1664840-1-kent.overstreet@linux.dev
[arnd@arndb.de: fix mm/kasan/hw_tags.c]
Link: https://lkml.kernel.org/r/20240404124435.3121534-1-arnd@kernel.org
[surenb@google.com: fix arc build]
Link: https://lkml.kernel.org/r/20240405225115.431056-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-1-surenb@google.com
Link: https://lkml.kernel.org/r/20240321163705.3067592-2-surenb@google.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Cc: Benno Lossin <benno.lossin@proton.me>
Cc: "Björn Roy Baron" <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This API is not used anymore, drop it for the whole tree.
Link: https://lkml.kernel.org/r/20240318200404.448346-13-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Mark Salter <msalter@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
T-Head's memory attribute extension (XTheadMae) (non-compatible
equivalent of RVI's Svpbmt) is currently assumed for all T-Head harts.
However, QEMU recently decided to drop acceptance of guests that write
reserved bits in PTEs.
As XTheadMae uses reserved bits in PTEs and Linux applies the MAE errata
for all T-Head harts, this broke the Linux startup on QEMU emulations
of the C906 emulation.
This patch attempts to address this issue by testing the MAE-enable bit
in the th.sxstatus CSR. This CSR is available in HW and can be
emulated in QEMU.
This patch also makes the XTheadMae probing mechanism reliable, because
a test for the right combination of mvendorid, marchid, and mimpid
is not sufficient to enable MAE.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Link: https://lore.kernel.org/r/20240407213236.2121592-3-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
T-Head's vendor extension to set page attributes has the name
MAE (memory attribute extension).
Let's rename it, so it is clear what this referes to.
Link: https://github.com/T-head-Semi/thead-extension-spec/blob/master/xtheadmae.adoc
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Link: https://lore.kernel.org/r/20240407213236.2121592-2-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The current definition yields a negative 32bits signed value which
result in a mask with is obviously incorrect. Replace it by using a
1ULL bit shift value to obtain a single set bit mask.
Fixes: 5dadda5e6a59 ("riscv: hwprobe: export Zvfh[min] ISA extensions")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240409143839.558784-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The original dts of CV1800B has a weird memory length as it
contains reserved memory for coprocessor. Make this area a
separate node so it can get the real memory length.
Link: https://lore.kernel.org/r/IA1PR20MB49531F274753B04A5547DB59BB052@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
from ETH0/1 nodes
Now that we have enabled IRQC support for RZ/Five SoC switch to interrupt
mode for ethernet0/1 PHYs instead of polling mode.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240403203503.634465-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add the IRQC node to RZ/Five (R9A07G043F) SoC DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240403203503.634465-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
As per the SBI specification, minor version is encoded in the
lower 24 bits only. Make sure that the SBI version is computed
with the appropriate mask.
Currently, there is no minor version in use. Thus, it doesn't
change anything functionality but it is good to be compliant with
the specification.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-8-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
SBI_STA_SHMEM_DISABLE is a macro to invoke disable shared memory
commands. As this can be invoked from other SBI extension context
as well, rename it to more generic name as SBI_SHMEM_DISABLE.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-7-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
SBI PMU Snapshot function optimizes the number of traps to
higher privilege mode by leveraging a shared memory between the S/VS-mode
and the M/HS mode. Add the definitions for that extension and new error
codes.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-6-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
It is a good practice to use BIT() instead of (1 << x).
Replace the current usages with BIT().
Take this opportunity to replace few (1UL << x) with BIT() as well
for consistency.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-5-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
SBI v2.0 added another function to SBI PMU extension to read
the upper bits of a counter with width larger than XLEN.
Add the definition for that function.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-3-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The counter overflow CSR name is "scountovf" not "sscountovf".
Fix the csr name.
Fixes: 4905ec2fb7e6 ("RISC-V: Add sscofpmf extension support")
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-2-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Originally, the use of kvm->lock in SBI_EXT_HSM_HART_START also avoids
the simultaneous updates to the reset context of target VCPU. Since this
lock has been replace with vcpu->mp_state_lock, and this new lock also
protects the vcpu->mp_state. We have to add a separate lock for
vcpu->reset_cntx.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-3-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Documentation/virt/kvm/locking.rst advises that kvm->lock should be
acquired outside vcpu->mutex and kvm->srcu. However, when KVM/RISC-V
handling SBI_EXT_HSM_HART_START, the lock ordering is vcpu->mutex,
kvm->srcu then kvm->lock.
Although the lockdep checking no longer complains about this after commit
f0f44752f5f6 ("rcu: Annotate SRCU's update-side lockdep dependencies"),
it's necessary to replace kvm->lock with a new dedicated lock to ensure
only one hart can execute the SBI_EXT_HSM_HART_START call for the target
hart simultaneously.
Additionally, this patch also rename "power_off" to "mp_state" with two
possible values. The vcpu->mp_state_lock also protects the access of
vcpu->mp_state.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-2-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
As the clk patch is merged, Use real clocks for sdhci0.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/IA1PR20MB4953CA5D46EA8913B130D502BB052@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Pull fix for SEV-SNP late disable bugs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When __bpf_prog_enter() returns zero, the s1 register is not set to zero,
resulting in incorrect runtime stats. Fix it by setting s1 immediately upon
the return of __bpf_prog_enter().
Fixes: 49b5e77ae3e2 ("riscv, bpf: Add bpf trampoline support for RV64")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240416064208.2919073-3-xukuohai@huaweicloud.com
|
|
The .change_pte() MMU notifier callback was intended as an
optimization. The original point of it was that KSM could tell KVM to flip
its secondary PTE to a new location without having to first zap it. At
the time there was also an .invalidate_page() callback; both of them were
*not* bracketed by calls to mmu_notifier_invalidate_range_{start,end}(),
and .invalidate_page() also doubled as a fallback implementation of
.change_pte().
Later on, however, both callbacks were changed to occur within an
invalidate_range_start/end() block.
In the case of .change_pte(), commit 6bdb913f0a70 ("mm: wrap calls to
set_pte_at_notify with invalidate_range_start and invalidate_range_end",
2012-10-09) did so to remove the fallback from .invalidate_page() to
.change_pte() and allow sleepable .invalidate_page() hooks.
This however made KVM's usage of the .change_pte() callback completely
moot, because KVM unmaps the sPTEs during .invalidate_range_start()
and therefore .change_pte() has no hope of finding a sPTE to change.
Drop the generic KVM code that dispatches to kvm_set_spte_gfn(), as
well as all the architecture specific implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240405115815.3226315-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add i2c devices for the CV180x, CV181x and SG200x soc.
Link: https://lore.kernel.org/r/IA1PR20MB49531AA2DBD4832B7926D4A8BB442@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add spi devices for the CV180x, CV181x and SG200x soc.
Link: https://lore.kernel.org/r/IA1PR20MB49532705DE532BCF81CCEFD0BB442@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add missing clocks of uart node for CV1800B and CV1812H.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/IA1PR20MB4953198222C3ABC2A2B6DE21BB262@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Add clock generator node for CV1800B and CV1812H.
Until now, It uses DT override to minimize duplication. This may
change in the future. See the last link for the discussion on
maintaining DT of CV1800 series.
Link: https://github.com/milkv-duo/duo-files/blob/6f4e9b8ecb459e017cca1a8df248a19ca70837a3/duo/datasheet/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf
Link: https://lore.kernel.org/all/IA1PR20MB495373158F3B690EF3BF2901BB8BA@IA1PR20MB4953.namprd20.prod.outlook.com/
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/r/IA1PR20MB4953ED6A4B57773865F49D6DBB262@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Since K230 has been supported, allow ARCH_CANAAN to be selected to build dt
and drivers for it in defconfig.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The ARCH_ and SOC_ versions of this symbol have persisted for quite a
while now in parallel. Generated .config files from previous LTS kernels
should have both. Finally remove SOC_VIRT and update all config files
using it.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
All the users in the kernel are gone and generated .config files from
previous LTS kernels will contain ARCH_SIFIVE. Drop SOC_SIFIVE and
update the defconfig.
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
SOC_MICROCHIP_POLARFIRE doesn't have any remaining in-kernel users, so
time has come to remove it. Foolish auld me left the "POLARFIRE" in the
new, hidden, config option when I renamed it and changed all of the
users however. As HPSC has been announced, and is not a PolarFire,
drop mention of that specific FPGA family from the new user-visible
config option.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
These two patches are fixes that the feature depends on, but they also
fix generic issues. So I'm picking them up for fixes as well as
for-next.
* commit 'aea702dde7e9876fb00571a2602f25130847bf0f':
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
Link: https://lore.kernel.org/r/20240227003630.3634533-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear
mapping") added logic to allow using RAM below the kernel load address.
However, this does not work for NOMMU, where PAGE_OFFSET is fixed to the
kernel load address. Since that range of memory corresponds to PFNs
below ARCH_PFN_OFFSET, mm initialization runs off the beginning of
mem_map and corrupts adjacent kernel memory. Fix this by restoring the
previous behavior for NOMMU kernels.
Fixes: 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240227003630.3634533-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
On NOMMU, userspace memory can come from anywhere in physical RAM. The
current definition of TASK_SIZE is wrong if any RAM exists above 4G,
causing spurious failures in the userspace access routines.
Fixes: 6bd33e1ece52 ("riscv: add nommu support")
Fixes: c3f896dcf1e4 ("mm: switch the test_vmalloc module to use __vmalloc_node")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Bo Gan <ganboing@gmail.com>
Link: https://lore.kernel.org/r/20240227003630.3634533-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Exit to userspace for breakpoint traps. Set the exit_reason as
KVM_EXIT_DEBUG before exit.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240402062628.5425-3-duchao@eswincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
kvm_vm_ioctl_check_extension(): Return 1 if KVM_CAP_SET_GUEST_DEBUG is
been checked.
kvm_arch_vcpu_ioctl_set_guest_debug(): Update the guest_debug flags
from userspace accordingly. Route the breakpoint exceptions to HS mode
if the VCPU is being debugged by userspace, by clearing the
corresponding bit in hedeleg.
Initialize the hedeleg configuration in kvm_riscv_vcpu_setup_config().
Write the actual CSR in kvm_arch_vcpu_load().
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240402062628.5425-2-duchao@eswincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for an __{get,put}_kernel_nofault to avoid an uninitialized
value causing spurious failures
- compat_vdso.so.dbg is now installed to the standard install location
- A fix to avoid initializing PERF_SAMPLE_BRANCH_*-related events, as
they aren't supported and will just later fail
- A fix to make AT_VECTOR_SIZE_ARCH correct now that we're providing
AT_MINSIGSTKSZ
- pgprot_nx() is now implemented, which fixes vmap W^X protection
- A fix for the vector save/restore code, which at least manifests as
corrupted vector state when a signal is taken
- A fix for a race condition in instruction patching
- A fix to avoid leaking the kernel-mode GP to userspace, which is a
kernel pointer leak that can be used to defeat KASLR in various ways
- A handful of smaller fixes to build warnings, an overzealous printk,
and some missing tracing annotations
* tag 'riscv-for-linus-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: process: Fix kernel gp leakage
riscv: Disable preemption when using patch_map()
riscv: Fix warning by declaring arch_cpu_idle() as noinstr
riscv: use KERN_INFO in do_trap
riscv: Fix vector state restore in rt_sigreturn()
riscv: mm: implement pgprot_nx
riscv: compat_vdso: align VDSOAS build log
RISC-V: Update AT_VECTOR_SIZE_ARCH for new AT_MINSIGSTKSZ
riscv: Mark __se_sys_* functions __used
drivers/perf: riscv: Disable PERF_SAMPLE_BRANCH_* while not supported
riscv: compat_vdso: install compat_vdso.so.dbg to /lib/modules/*/vdso/
riscv: hwprobe: do not produce frtace relocation
riscv: Fix spurious errors from __get/put_kernel_nofault
riscv: mm: Fix prototype to avoid discarding const
|
|
All users of SOC_CANAAN are now gone and it is not user-visible, remove it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Since SOC_FOO should be deprecated from patch [1], and cleanup for other
SoCs is already in the mailing list [2,3,4], we remove the use of
SOC_CANAAN and use ARCH_CANAAN for SoCs vendored by Canaan instead from now
on. And allows ARCH_CANAAN to be selected for other Canaan SoCs. However,
we should keep the config SOC_CANAAN and use def_bool to redirect the
symbol temporarily to avoid potential conflict.
Since we now have Canaan Kendryte K230 with MMU, ARCH_CANAAN is no longer
referred to as K210. There are some special features for K210, like M-Mode
No MMU and loader.bin in arch/riscv/Makefile. If we keep ARCH_CANAAN for
other Canaan SoCs and remove the K210, the depends on !MMU in Kconfig may
confuse some users who try to boot Kernel with MMU on K210, as Damien
mentioned in the list [5]. Thus, we introduce a new symbol SOC_CANAAN_K210
for any conditional code or driver selection specific to the K210, so users
will not try to build some K210-specific things when MMU is enabled and see
it fails to boot on K210.
[1] https://lore.kernel.org/linux-riscv/20221121221414.109965-1-conor@kernel.org/
[2] https://lore.kernel.org/linux-riscv/20240305-praying-clad-c4fbcaa7ed0a@spud/
[3] https://lore.kernel.org/linux-riscv/20240305-fled-undrilled-41dc0c46bb29@spud/
[4] https://lore.kernel.org/linux-riscv/20240305-stress-earflap-d7ddb8655a4d@spud/
[5] https://lore.kernel.org/linux-riscv/2b0511af-1b5b-4c90-a673-c9113bb58142@kernel.org/
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
childregs represents the registers which are active for the new thread
in user context. For a kernel thread, childregs->gp is never used since
the kernel gp is not touched by switch_to. For a user mode helper, the
gp value can be observed in user space after execve or possibly by other
means.
[From the email thread]
The /* Kernel thread */ comment is somewhat inaccurate in that it is also used
for user_mode_helper threads, which exec a user process, e.g. /sbin/init or
when /proc/sys/kernel/core_pattern is a pipe. Such threads do not have
PF_KTHREAD set and are valid targets for ptrace etc. even before they exec.
childregs is the *user* context during syscall execution and it is observable
from userspace in at least five ways:
1. kernel_execve does not currently clear integer registers, so the starting
register state for PID 1 and other user processes started by the kernel has
sp = user stack, gp = kernel __global_pointer$, all other integer registers
zeroed by the memset in the patch comment.
This is a bug in its own right, but I'm unwilling to bet that it is the only
way to exploit the issue addressed by this patch.
2. ptrace(PTRACE_GETREGSET): you can PTRACE_ATTACH to a user_mode_helper thread
before it execs, but ptrace requires SIGSTOP to be delivered which can only
happen at user/kernel boundaries.
3. /proc/*/task/*/syscall: this is perfectly happy to read pt_regs for
user_mode_helpers before the exec completes, but gp is not one of the
registers it returns.
4. PERF_SAMPLE_REGS_USER: LOCKDOWN_PERF normally prevents access to kernel
addresses via PERF_SAMPLE_REGS_INTR, but due to this bug kernel addresses
are also exposed via PERF_SAMPLE_REGS_USER which is permitted under
LOCKDOWN_PERF. I have not attempted to write exploit code.
5. Much of the tracing infrastructure allows access to user registers. I have
not attempted to determine which forms of tracing allow access to user
registers without already allowing access to kernel registers.
Fixes: 7db91e57a0ac ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan O'Rear <sorear@fastmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327061258.2370291-1-sorear@fastmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
patch_map() uses fixmap mappings to circumvent the non-writability of
the kernel text mapping.
The __set_fixmap() function only flushes the current cpu tlb, it does
not emit an IPI so we must make sure that while we use a fixmap mapping,
the current task is not migrated on another cpu which could miss the
newly introduced fixmap mapping.
So in order to avoid any task migration, disable the preemption.
Reported-by: Andrea Parri <andrea@rivosinc.com>
Closes: https://lore.kernel.org/all/ZcS+GAaM25LXsBOl@andrea/
Reported-by: Andy Chiu <andy.chiu@sifive.com>
Closes: https://lore.kernel.org/linux-riscv/CABgGipUMz3Sffu-CkmeUB1dKVwVQ73+7=sgC45-m0AE9RCjOZg@mail.gmail.com/
Fixes: cad539baa48f ("riscv: implement a memset like function for text")
Fixes: 0ff7c3b33127 ("riscv: Use text_mutex instead of patch_lock")
Co-developed-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240326203017.310422-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The following warning appears when using ftrace:
[89855.443413] RCU not on for: arch_cpu_idle+0x0/0x1c
[89855.445640] WARNING: CPU: 5 PID: 0 at include/linux/trace_recursion.h:162 arch_ftrace_ops_list_func+0x208/0x228
[89855.445824] Modules linked in: xt_conntrack(E) nft_chain_nat(E) xt_MASQUERADE(E) nf_conntrack_netlink(E) xt_addrtype(E) nft_compat(E) nf_tables(E) nfnetlink(E) br_netfilter(E) cfg80211(E) nls_iso8859_1(E) ofpart(E) redboot(E) cmdlinepart(E) cfi_cmdset_0001(E) virtio_net(E) cfi_probe(E) cfi_util(E) 9pnet_virtio(E) gen_probe(E) net_failover(E) virtio_rng(E) failover(E) 9pnet(E) physmap(E) map_funcs(E) chipreg(E) mtd(E) uio_pdrv_genirq(E) uio(E) dm_multipath(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) drm(E) efi_pstore(E) backlight(E) ip_tables(E) x_tables(E) raid10(E) raid456(E) async_raid6_recov(E) async_memcpy(E) async_pq(E) async_xor(E) xor(E) async_tx(E) raid6_pq(E) raid1(E) raid0(E) virtio_blk(E)
[89855.451563] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G E 6.8.0-rc6ubuntu-defconfig #2
[89855.451726] Hardware name: riscv-virtio,qemu (DT)
[89855.451899] epc : arch_ftrace_ops_list_func+0x208/0x228
[89855.452016] ra : arch_ftrace_ops_list_func+0x208/0x228
[89855.452119] epc : ffffffff8016b216 ra : ffffffff8016b216 sp : ffffaf808090fdb0
[89855.452171] gp : ffffffff827c7680 tp : ffffaf808089ad40 t0 : ffffffff800c0dd8
[89855.452216] t1 : 0000000000000001 t2 : 0000000000000000 s0 : ffffaf808090fe30
[89855.452306] s1 : 0000000000000000 a0 : 0000000000000026 a1 : ffffffff82cd6ac8
[89855.452423] a2 : ffffffff800458c8 a3 : ffffaf80b1870640 a4 : 0000000000000000
[89855.452646] a5 : 0000000000000000 a6 : 00000000ffffffff a7 : ffffffffffffffff
[89855.452698] s2 : ffffffff82766872 s3 : ffffffff80004caa s4 : ffffffff80ebea90
[89855.452743] s5 : ffffaf808089bd40 s6 : 8000000a00006e00 s7 : 0000000000000008
[89855.452787] s8 : 0000000000002000 s9 : 0000000080043700 s10: 0000000000000000
[89855.452831] s11: 0000000000000000 t3 : 0000000000100000 t4 : 0000000000000064
[89855.452874] t5 : 000000000000000c t6 : ffffaf80b182dbfc
[89855.452929] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
[89855.453053] [<ffffffff8016b216>] arch_ftrace_ops_list_func+0x208/0x228
[89855.453191] [<ffffffff8000e082>] ftrace_call+0x8/0x22
[89855.453265] [<ffffffff800a149c>] do_idle+0x24c/0x2ca
[89855.453357] [<ffffffff8000da54>] return_to_handler+0x0/0x26
[89855.453429] [<ffffffff8000b716>] smp_callin+0x92/0xb6
[89855.453785] ---[ end trace 0000000000000000 ]---
To fix this, mark arch_cpu_idle() as noinstr, like it is done in commit
a9cbc1b471d2 ("s390/idle: mark arch_cpu_idle() noinstr").
Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Closes: https://lore.kernel.org/linux-riscv/51f21b87-ebed-4411-afbc-c00d3dea2bab@yadro.com/
Fixes: cfbc4f81c9d0 ("riscv: Select ARCH_WANTS_NO_INSTR")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Andy Chiu <andy.chiu@sifive.com>
Acked-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240326203017.310422-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Print the instruction dump with info instead of emergency level. The
unhandled signal message is only for informational purpose.
Fixes: b8a03a634129 ("riscv: add userland instruction dump to RISC-V splats")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/mvmy1aegrhm.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))). The addr_space=0 is reserved as
bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY
rY = addr_space_cast(rX, 1, 0) has to be converted by JIT.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240404114203.105970-3-puranjay12@gmail.com
|
|
Add support for [LDX | STX | ST], PROBE_MEM32, [B | H | W | DW]
instructions. They are similar to PROBE_MEM instructions with the
following differences:
- PROBE_MEM32 supports store.
- PROBE_MEM32 relies on the verifier to clear upper 32-bit of the
src/dst register
- PROBE_MEM32 adds 64-bit kern_vm_start address (which is stored in S7
in the prologue). Due to bpf_arena constructions such S7 + reg +
off16 access is guaranteed to be within arena virtual range, so no
address check at run-time.
- S11 is a free callee-saved register, so it is used to store kern_vm_start
- PROBE_MEM32 allows STX and ST. If they fault the store is a nop. When
LDX faults the destination register is zeroed.
To support these on riscv, we do tmp = S7 + src/dst reg and then use
tmp2 as the new src/dst register. This allows us to reuse most of the
code for normal [LDX | STX | ST].
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240404114203.105970-2-puranjay12@gmail.com
|
|
The RISC-V Vector specification states in "Appendix D: Calling
Convention for Vector State" [1] that "Executing a system call causes
all caller-saved vector registers (v0-v31, vl, vtype) and vstart to
become unspecified.". In the RISC-V kernel this is called "discarding
the vstate".
Returning from a signal handler via the rt_sigreturn() syscall, vector
discard is also performed. However, this is not an issue since the
vector state should be restored from the sigcontext, and therefore not
care about the vector discard.
The "live state" is the actual vector register in the running context,
and the "vstate" is the vector state of the task. A dirty live state,
means that the vstate and live state are not in synch.
When vectorized user_from_copy() was introduced, an bug sneaked in at
the restoration code, related to the discard of the live state.
An example when this go wrong:
1. A userland application is executing vector code
2. The application receives a signal, and the signal handler is
entered.
3. The application returns from the signal handler, using the
rt_sigreturn() syscall.
4. The live vector state is discarded upon entering the
rt_sigreturn(), and the live state is marked as "dirty", indicating
that the live state need to be synchronized with the current
vstate.
5. rt_sigreturn() restores the vstate, except the Vector registers,
from the sigcontext
6. rt_sigreturn() restores the Vector registers, from the sigcontext,
and now the vectorized user_from_copy() is used. The dirty live
state from the discard is saved to the vstate, making the vstate
corrupt.
7. rt_sigreturn() returns to the application, which crashes due to
corrupted vstate.
Note that the vectorized user_from_copy() is invoked depending on the
value of CONFIG_RISCV_ISA_V_UCOPY_THRESHOLD. Default is 768, which
means that vlen has to be larger than 128b for this bug to trigger.
The fix is simply to mark the live state as non-dirty/clean prior
performing the vstate restore.
Link: https://github.com/riscv/riscv-isa-manual/releases/download/riscv-isa-release-8abdb41-2024-03-26/unpriv-isa-asciidoc.pdf # [1]
Reported-by: Charlie Jenkins <charlie@rivosinc.com>
Reported-by: Vineet Gupta <vgupta@kernel.org>
Fixes: c2a658d41924 ("riscv: lib: vectorize copy_to_user/copy_from_user")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Tested-by: Vineet Gupta <vineetg@rivosinc.com>
Link: https://lore.kernel.org/r/20240403072638.567446-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Ensure perf events programmed to count during guest execution are
actually enabled before entering the guest in the nVHE
configuration
- Restore out-of-range handler for stage-2 translation faults
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches
- Fix early handling of architectural VHE-only systems to ensure E2H
is appropriately set
- Correct a format specifier warning in the arch_timer selftest
- Make the KVM banner message correctly handle all of the possible
configurations
RISC-V:
- Remove redundant semicolon in num_isa_ext_regs()
- Fix APLIC setipnum_le/be write emulation
- Fix APLIC in_clrip[x] read emulation
x86:
- Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID
entries (old vs. new) and ultimately neglects to clear PV_UNHALT
from vCPUs with HLT-exiting disabled
- Documentation fixes for SEV
- Fix compat ABI for KVM_MEMORY_ENCRYPT_OP
- Fix a 14-year-old goof in a declaration shared by host and guest;
the enabled field used by Linux when running as a guest pushes the
size of "struct kvm_vcpu_pv_apf_data" from 64 to 68 bytes. This is
really unconsequential because KVM never consumes anything beyond
the first 64 bytes, but the resulting struct does not match the
documentation
Selftests:
- Fix spelling mistake in arch_timer selftest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: arm64: Rationalise KVM banner output
arm64: Fix early handling of FEAT_E2H0 not being implemented
KVM: arm64: Ensure target address is granule-aligned for range TLBI
KVM: arm64: Use TLBI_TTL_UNKNOWN in __kvm_tlb_flush_vmid_range()
KVM: arm64: Don't pass a TLBI level hint when zapping table entries
KVM: arm64: Don't defer TLB invalidation when zapping table entries
KVM: selftests: Fix __GUEST_ASSERT() format warnings in ARM's arch timer test
KVM: arm64: Fix out-of-IPA space translation fault handling
KVM: arm64: Fix host-programmed guest events in nVHE
RISC-V: KVM: Fix APLIC in_clrip[x] read emulation
RISC-V: KVM: Fix APLIC setipnum_le/be write emulation
RISC-V: KVM: Remove second semicolon
KVM: selftests: Fix spelling mistake "trigged" -> "triggered"
Documentation: kvm/sev: clarify usage of KVM_MEMORY_ENCRYPT_OP
Documentation: kvm/sev: separate description of firmware
KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP
KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled
KVM: x86: Use actual kvm_cpuid.base for clearing KVM_FEATURE_PV_UNHALT
KVM: x86: Introduce __kvm_get_hypervisor_cpuid() helper
KVM: SVM: Return -EINVAL instead of -EBUSY on attempt to re-init SEV/SEV-ES
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, WiFi and netfilter.
Current release - regressions:
- ipv6: fix address dump when IPv6 is disabled on an interface
Current release - new code bugs:
- bpf: temporarily disable atomic operations in BPF arena
- nexthop: fix uninitialized variable in nla_put_nh_group_stats()
Previous releases - regressions:
- bpf: protect against int overflow for stack access size
- hsr: fix the promiscuous mode in offload mode
- wifi: don't always use FW dump trig
- tls: adjust recv return with async crypto and failed copy to
userspace
- tcp: properly terminate timers for kernel sockets
- ice: fix memory corruption bug with suspend and rebuild
- at803x: fix kernel panic with at8031_probe
- qeth: handle deferred cc1
Previous releases - always broken:
- bpf: fix bug in BPF_LDX_MEMSX
- netfilter: reject table flag and netdev basechain updates
- inet_defrag: prevent sk release while still in use
- wifi: pick the version of SESSION_PROTECTION_NOTIF
- wwan: t7xx: split 64bit accesses to fix alignment issues
- mlxbf_gige: call request_irq() after NAPI initialized
- hns3: fix kernel crash when devlink reload during pf
initialization"
* tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
inet: inet_defrag: prevent sk release while still in use
Octeontx2-af: fix pause frame configuration in GMP mode
net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips
net: bcmasp: Remove phy_{suspend/resume}
net: bcmasp: Bring up unimac after PHY link up
net: phy: qcom: at803x: fix kernel panic with at8031_probe
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
bpf: update BPF LSM designated reviewer list
bpf: Protect against int overflow for stack access size
bpf: Check bloom filter map value size
bpf: fix warning for crash_kexec
selftests: netdevsim: set test timeout to 10 minutes
net: wan: framer: Add missing static inline qualifiers
mlxbf_gige: call request_irq() after NAPI initialized
tls: get psock ref after taking rxlock to avoid leak
selftests: tls: add test with a partially invalid iov
tls: adjust recv return with async crypto and failed copy to userspace
...
|
|
commit cca98e9f8b5e ("mm: enforce that vmap can't map pages
executable") enforces the W^X protection by not allowing remapping
existing pages as executable. Add riscv bits so that riscv can benefit
the same protection.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231121160637.3856-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add one more space after "VDSOAS" for better alignment in the build log.
[Before]
LDS arch/riscv/kernel/compat_vdso/compat_vdso.lds
VDSOAS arch/riscv/kernel/compat_vdso/rt_sigreturn.o
VDSOAS arch/riscv/kernel/compat_vdso/getcpu.o
VDSOAS arch/riscv/kernel/compat_vdso/flush_icache.o
VDSOAS arch/riscv/kernel/compat_vdso/note.o
VDSOLD arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg
VDSOSYM include/generated/compat_vdso-offsets.h
[After]
LDS arch/riscv/kernel/compat_vdso/compat_vdso.lds
VDSOAS arch/riscv/kernel/compat_vdso/rt_sigreturn.o
VDSOAS arch/riscv/kernel/compat_vdso/getcpu.o
VDSOAS arch/riscv/kernel/compat_vdso/flush_icache.o
VDSOAS arch/riscv/kernel/compat_vdso/note.o
VDSOLD arch/riscv/kernel/compat_vdso/compat_vdso.so.dbg
VDSOSYM include/generated/compat_vdso-offsets.h
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231117125843.1058553-1-masahiroy@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
"riscv: signal: Report signal frame size to userspace via auxv" (e92f469)
has added new constant AT_MINSIGSTKSZ but failed to increment the size of
auxv, keeping AT_VECTOR_SIZE_ARCH at 9.
This fix correctly increments AT_VECTOR_SIZE_ARCH to 10, following the
approach in the commit 94b07c1 ("arm64: signal: Report signal frame size
to userspace via auxv").
Link: https://lore.kernel.org/r/73883406.20231215232720@torrio.net
Link: https://lore.kernel.org/all/20240102133617.3649-1-victor@torrio.net/
Reported-by: Ivan Komarov <ivan.komarov@dfyz.info>
Closes: https://lore.kernel.org/linux-riscv/CY3Z02NYV1C4.11BLB9PLVW9G1@fedora/
Fixes: e92f469b0771 ("riscv: signal: Report signal frame size to userspace via auxv")
Signed-off-by: Victor Isaev <isv@google.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add sdhci dt node in SoC dtsi and enable it in milkv duo dts.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Link: https://lore.kernel.org/r/20240217144826.3944-1-jszhang@kernel.org
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
|
|
Clang doesn't think ___se_sys_* functions used even though they are
aliased to __se_sys_*, resulting in -Wunused-function warnings when
building rv32. For example:
mm/oom_kill.c:1195:1: warning: unused function '___se_sys_process_mrelease' [-Wunused-function]
1195 | SYSCALL_DEFINE2(process_mrelease, int, pidfd, unsigned int, flags)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/syscalls.h:221:36: note: expanded from macro 'SYSCALL_DEFINE2'
221 | #define SYSCALL_DEFINE2(name, ...) SYSCALL_DEFINEx(2, _##name, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/syscalls.h:231:2: note: expanded from macro 'SYSCALL_DEFINEx'
231 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/syscall_wrapper.h:81:2: note: expanded from macro '__SYSCALL_DEFINEx'
81 | __SYSCALL_SE_DEFINEx(x, sys, name, __VA_ARGS__) \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/syscall_wrapper.h:40:14: note: expanded from macro '__SYSCALL_SE_DEFINEx'
40 | static long ___se_##prefix##name(__MAP(x,__SC_LONG,__VA_ARGS__))
| ^~~~~~~~~~~~~~~~~~~~
<scratch space>:30:1: note: expanded from here
30 | ___se_sys_process_mrelease
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Mark the functions __used explicitly to fix the Clang warnings.
Fixes: a9ad73295cc1 ("riscv: Fix syscall wrapper for >word-size arguments")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240326153712.1839482-2-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
'make vdso_install' installs debug vdso files to /lib/modules/*/vdso/.
Only for the compat vdso on riscv, the installation destination differs;
compat_vdso.so.dbg is installed to /lib/module/*/compat_vdso/.
To follow the standard install destination and simplify the vdso_install
logic, change the install destination to standard /lib/modules/*/vdso/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231117125807.1058477-1-masahiroy@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Such relocation causes crash of android linker similar to one
described in commit e05d57dcb8c7
("riscv: Fixup __vdso_gettimeofday broke dynamic ftrace").
Looks like this relocation is added by CONFIG_DYNAMIC_FTRACE which is
disabled in the default android kernel.
Before:
readelf -rW arch/riscv/kernel/vdso/vdso.so:
Relocation section '.rela.dyn' at offset 0xd00 contains 1 entry:
Offset Info Type
0000000000000d20 0000000000000003 R_RISCV_RELATIVE
objdump:
0000000000000c86 <__vdso_riscv_hwprobe@@LINUX_4.15>:
c86: 0001 nop
c88: 0001 nop
c8a: 0001 nop
c8c: 0001 nop
c8e: e211 bnez a2,c92 <__vdso_riscv_hwprobe...
After:
readelf -rW arch/riscv/kernel/vdso/vdso.so:
There are no relocations in this file.
objdump:
0000000000000c86 <__vdso_riscv_hwprobe@@LINUX_4.15>:
c86: e211 bnez a2,c8a <__vdso_riscv_hwprobe...
c88: c6b9 beqz a3,cd6 <__vdso_riscv_hwprobe...
c8a: e739 bnez a4,cd8 <__vdso_riscv_hwprobe...
c8c: ffffd797 auipc a5,0xffffd
Also disable SCS since it also should not be available in vdso.
Fixes: aa5af0aa90ba ("RISC-V: Add hwprobe vDSO function and data")
Signed-off-by: Roman Artemev <roman.artemev@syntacore.com>
Signed-off-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240313085843.17661-1-vladimir.isaev@syntacore.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
These macros did not initialize __kr_err, so they could fail even if
the access did not fault.
Cc: stable@vger.kernel.org
Fixes: d464118cdc41 ("riscv: implement __get_kernel_nofault and __put_user_nofault")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240312022030.320789-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
__flush_tlb_range() does not modify the provided cpumask, so its cmask
parameter can be pointer-to-const. This avoids the unsafe cast of
cpu_online_mask.
Fixes: 54d7431af73e ("riscv: Add support for BATCHED_UNMAP_TLB_FLUSH")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240301201837.2826172-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-03-25
The following pull-request contains BPF updates for your *net* tree.
We've added 17 non-merge commits during the last 12 day(s) which contain
a total of 19 files changed, 184 insertions(+), 61 deletions(-).
The main changes are:
1) Fix an arm64 BPF JIT bug in BPF_LDX_MEMSX implementation's offset handling
found via test_bpf module, from Puranjay Mohan.
2) Various fixups to the BPF arena code in particular in the BPF verifier and
around BPF selftests to match latest corresponding LLVM implementation,
from Puranjay Mohan and Alexei Starovoitov.
3) Fix xsk to not assume that metadata is always requested in TX completion,
from Stanislav Fomichev.
4) Fix riscv BPF JIT's kfunc parameter incompatibility between BPF and the riscv
ABI which requires sign-extension on int/uint, from Pu Lehui.
5) Fix s390x BPF JIT's bpf_plt pointer arithmetic which triggered a crash when
testing struct_ops, from Ilya Leoshkevich.
6) Fix libbpf's arena mmap handling which had incorrect u64-to-pointer cast on
32-bit architectures, from Andrii Nakryiko.
7) Fix libbpf to define MFD_CLOEXEC when not available, from Arnaldo Carvalho de Melo.
8) Fix arm64 BPF JIT implementation for 32bit unconditional bswap which
resulted in an incorrect swap as indicated by test_bpf, from Artem Savkov.
9) Fix BPF man page build script to use silent mode, from Hangbin Liu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
riscv, bpf: Fix kfunc parameters incompatibility between bpf and riscv abi
bpf: verifier: reject addr_space_cast insn without arena
selftests/bpf: verifier_arena: fix mmap address for arm64
bpf: verifier: fix addr_space_cast from as(1) to as(0)
libbpf: Define MFD_CLOEXEC if not available
arm64: bpf: fix 32bit unconditional bswap
bpf, arm64: fix bug in BPF_LDX_MEMSX
libbpf: fix u64-to-pointer cast on 32-bit arches
s390/bpf: Fix bpf_plt pointer arithmetic
xsk: Don't assume metadata is always requested in TX completion
selftests/bpf: Add arena test case for 4Gbyte corner case
selftests/bpf: Remove hard coded PAGE_SIZE macro.
libbpf, selftests/bpf: Adjust libbpf, bpftool, selftests to match LLVM
bpf: Clarify bpf_arena comments.
MAINTAINERS: Update email address for Quentin Monnet
scripts/bpf_doc: Use silent mode when exec make cmd
bpf: Temporarily disable atomic operations in BPF arena
====================
Link: https://lore.kernel.org/r/20240325213520.26688-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The reads to APLIC in_clrip[x] registers returns rectified input values
of the interrupt sources.
A rectified input value of an interrupt source is defined by the section
"4.5.2 Source configurations (sourcecfg[1]–sourcecfg[1023])" of the
RISC-V AIA specification as:
rectified input value = (incoming wire value) XOR (source is inverted)
Update the riscv_aplic_input() implementation to match the above.
Cc: stable@vger.kernel.org
Fixes: 74967aa208e2 ("RISC-V: KVM: Add in-kernel emulation of AIA APLIC")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240321085041.1955293-3-apatel@ventanamicro.com
|
|
We encountered a failing case when running selftest in no_alu32 mode:
The failure case is `kfunc_call/kfunc_call_test4` and its source code is
like bellow:
```
long bpf_kfunc_call_test4(signed char a, short b, int c, long d) __ksym;
int kfunc_call_test4(struct __sk_buff *skb)
{
...
tmp = bpf_kfunc_call_test4(-3, -30, -200, -1000);
...
}
```
And its corresponding asm code is:
```
0: r1 = -3
1: r2 = -30
2: r3 = 0xffffff38 # opcode: 18 03 00 00 38 ff ff ff 00 00 00 00 00 00 00 00
4: r4 = -1000
5: call bpf_kfunc_call_test4
```
insn 2 is parsed to ld_imm64 insn to emit 0x00000000ffffff38 imm, and
converted to int type and then send to bpf_kfunc_call_test4. But since
it is zero-extended in the bpf calling convention, riscv jit will
directly treat it as an unsigned 32-bit int value, and then fails with
the message "actual 4294966063 != expected -1234".
The reason is the incompatibility between bpf and riscv abi, that is,
bpf will do zero-extension on uint, but riscv64 requires sign-extension
on int or uint. We can solve this problem by sign extending the 32-bit
parameters in kfunc.
The issue is related to [0], and thanks to Yonghong and Alexei.
Link: https://github.com/llvm/llvm-project/pull/84874 [0]
Fixes: d40c3847b485 ("riscv, bpf: Add kfunc support for RV64")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240324103306.2202954-1-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The QEMU virt machine supports AIA emulation and quite a few RISC-V
platforms with AIA support are under development so select APLIC and
IMSIC drivers for all RISC-V platforms.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-9-apatel@ventanamicro.com
|
|
The writes to setipnum_le/be register for APLIC in MSI-mode have special
consideration for level-triggered interrupts as-per the section "4.9.2
Special consideration for level-sensitive interrupt sources" of the RISC-V
AIA specification.
Particularly, the below text from the RISC-V AIA specification defines
the behaviour of writes to setipnum_le/be register for level-triggered
interrupts:
"A second option is for the interrupt service routine to write the
APLIC’s source identity number for the interrupt to the domain’s
setipnum register just before exiting. This will cause the interrupt’s
pending bit to be set to one again if the source is still asserting
an interrupt, but not if the source is not asserting an interrupt."
Fix setipnum_le/be write emulation for in-kernel APLIC by implementing
the above behaviour in aplic_write_pending() function.
Cc: stable@vger.kernel.org
Fixes: 74967aa208e2 ("RISC-V: KVM: Add in-kernel emulation of AIA APLIC")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240321085041.1955293-2-apatel@ventanamicro.com
|
|
There is a statement with two semicolons. Remove the second one, it
is redundant.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240315092914.2431214-1-colin.i.king@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
|
|
The current syscall wrapper macros break 64-bit arguments on
rv32 because they only guarantee the first N input registers are
passed to syscalls that accept N arguments. According to the
calling convention, values twice the word size reside in register
pairs and as a result, syscall arguments don't always have a
direct register mapping on rv32.
Instead of using `__MAP(x,__SC_LONG,__VA_ARGS__)` to declare the
type of the `__se(_compat)_sys_*` functions on rv32, change the
function declarations to accept `ulong` arguments and alias them
to the actual syscall implementations, similarly to the existing
macros in include/linux/syscalls.h. This matches previous
behavior and ensures registers are passed to syscalls as-is, no
matter which argument types they expect.
Fixes: 08d0ce30e0e4 ("riscv: Implement syscall wrappers")
Reported-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240311193143.2981310-2-samitolvanen@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Eric Chan <ericchancf@google.com> says:
This series makes barrier-related macro more neat and clear.
This is a follow-up to [0-3], change to multiple patches,
for readability, create new message thread.
[0](v1/v2) https://lore.kernel.org/lkml/20240209125048.4078639-1-ericchancf@google.com/
[1] (v3) https://lore.kernel.org/lkml/20240213142856.2416073-1-ericchancf@google.com/
[2] (v4) https://lore.kernel.org/lkml/20240213200923.2547570-1-ericchancf@google.com/
[4] (v5) https://lore.kernel.org/lkml/20240213223810.2595804-1-ericchancf@google.com/
* b4-shazam-merge:
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
Link: https://lore.kernel.org/r/20240217131206.3667544-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add an implementation of cts(cbc(aes)) accelerated using the Zvkned
RISC-V vector crypto extension. This is mainly useful for fscrypt,
where cts(cbc(aes)) is the "default" filenames encryption algorithm. In
that use case, typically most messages are short and are block-aligned.
The CBC-CTS variant implemented is CS3; this is the variant Linux uses.
To perform well on short messages, the new implementation processes the
full message in one call to the assembly function if the data is
contiguous. Otherwise it falls back to CBC operations followed by CTS
at the end. For decryption, to further improve performance on short
messages, especially block-aligned messages, the CBC-CTS assembly
function parallelizes the AES decryption of all full blocks. This
improves on the arm64 implementation of cts(cbc(aes)), which always
splits the CBC part(s) from the CTS part, doing the AES decryptions for
the last two blocks serially and usually loading the round keys twice.
Tested in QEMU with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240213055442.35954-1-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since CBC decryption is parallelizable, make the RISC-V implementation
of AES-CBC decryption process multiple blocks at a time, instead of
processing the blocks one by one. This should improve performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20240208060851.154129-1-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Sunil V L <sunilvl@ventanamicro.com> says:
This series enables the support for "Collaborative Processor Performance
Control (CPPC) on ACPI based RISC-V platforms. It depends on the
encoding of CPPC registers as defined in RISC-V FFH spec [2].
CPPC is described in the ACPI spec [1]. RISC-V FFH spec required to
enable this, is available at [2].
[1] - https://uefi.org/specs/ACPI/6.5/08_Processor_Configuration_and_Control.html#collaborative-processor-performance-control
[2] - https://github.com/riscv-non-isa/riscv-acpi-ffh/releases/download/v1.0.0/riscv-ffh.pdf
* b4-shazam-merge:
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
Link: https://lore.kernel.org/r/20240208034414.22579-1-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
We used to emit a flush_icache_all() whenever a dirty executable
mapping is set in the page table but we can instead call
flush_icache_mm() which will only send IPIs to cores that currently run
this mm and add a deferred icache flush to the others.
The number of calls to sbi_remote_fence_i() (tested without IPI
support):
With a simple buildroot rootfs:
* Before: ~5k
* After : 4 (!)
Tested on HW, the boot to login is ~4.5% faster.
With an ubuntu rootfs:
* Before: ~24k
* After : ~13k
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240202124711.256146-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
count * size in the kzalloc() function.
Also, it is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not change the
former (unlike the latter).
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240120135400.4710-1-erick.archer@gmx.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Sunil V L <sunilvl@ventanamicro.com> says:
This series adds support for Low Power Idle (LPI) on ACPI based
platforms.
LPI is described in the ACPI spec [1]. RISC-V FFH spec required to
enable this is available at [2].
[1] - https://uefi.org/specs/ACPI/6.5/08_Processor_Configuration_and_Control.html#lpi-low-power-idle-states
[2] - https://github.com/riscv-non-isa/riscv-acpi-ffh/releases/download/v/riscv-ffh.pdf
* b4-shazam-merge:
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
Link: https://lore.kernel.org/r/20240118062930.245937-1-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
arch_get_mmap_end()"
Leonardo Bras <leobras@redhat.com> says:
I just saw the opportunity of optimizing the helper is_compat_task() by
introducing a compile-time test, and it made possible to remove some
#ifdef's without any loss of performance.
I also saw the possibility of removing the direct check of task flags from
general code, and concentrated it in asm/compat.h by creating a few more
helpers, which in the end helped optimize code.
arch_get_mmap_end() just got a simple improvement and some extra docs.
* b4-shazam-merge:
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
Link: https://lore.kernel.org/r/20240103160024.70305-2-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The past form of RISCV_FENCE would cause checkpatch.pl to issue
error messages, the example is as follows:
ERROR: space required after that ',' (ctx:VxV)
26: FILE: arch/riscv/include/asm/barrier.h:27:
+#define __smp_mb() RISCV_FENCE(rw,rw)
^
fix the remaining of RISCV_FENCE.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131328.3669364-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Disparate fence implementations are consolidated into fence.h.
Also introduce RISCV_FENCE_ASM to make fence macro more reusable.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131316.3668927-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Introduce RISCV_FULL_BARRIER and use in arch_atomic* function.
like RISCV_ACQUIRE_BARRIER and RISCV_RELEASE_BARRIER, the fence
instruction can be eliminated When SMP is not enabled.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131302.3668481-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Introduce __{mb,rmb,wmb}, and rely on the generic definitions for
{mb,rmb,wmb}. Although KCSAN is not supported yet, the definitions can
be made more consistent with generic instrumentation. Also add a space
to make the changes pass check by checkpatch.pl.
Without the space, the error message is as below:
ERROR: space required after that ',' (ctx:VxV)
26: FILE: arch/riscv/include/asm/barrier.h:23:
+#define __mb() RISCV_FENCE(iorw,iorw)
^
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131249.3668103-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
CONFIG_ACPI_CPPC_CPUFREQ is required to enable CPPC for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
To support ACPI Low Power Idle (LPI), few functions are required which
are currently static functions in the DT based cpuidle driver. Hence,
move them under arch/riscv so that ACPI driver also can use them. Since
they are no longer static functions, append "riscv_" prefix to the
function name.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In order to have all task compat bit access directly in compat.h, introduce
set_compat_task() to set/reset those when needed.
Also, since it's only used on an if/else scenario, simplify the macro using
it.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240103160024.70305-7-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
task_user_regset_view() makes use of a function very similar to
is_compat_task(), but pointing to a any thread.
In arm64 asm/compat.h there is a function very similar to that:
is_compat_thread(struct thread_info *thread)
Copy this function to riscv asm/compat.h and make use of it into
task_user_regset_view().
Also, introduce a compile-time test for CONFIG_COMPAT and simplify the
function code by removing the #ifdef.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240103160024.70305-6-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently several places will test for CONFIG_COMPAT before testing
is_compat_task(), probably in order to avoid a run-time test into the task
structure.
Since is_compat_task() is an inlined function, it would be helpful to add a
compile-time test of CONFIG_COMPAT, making sure it always returns zero when
the option is not enabled during the kernel build.
With this, the compiler is able to understand in build-time that
is_compat_task() will always return 0, and optimize-out some of the extra
code introduced by the option.
This will also allow removing a lot #ifdefs that were introduced, and make
the code more clean.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240103160024.70305-5-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
There is some code that detects compat mode into a task by checking the
flag directly, and other code that check using the helper is_compat_task().
Since the helper already exists, use it instead of checking the flags
directly.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Link: https://lore.kernel.org/r/20240103160024.70305-4-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This macro caused me some confusion, which took some reviewer's time to
make it clear, so I propose adding a short comment in code to avoid
confusion in the future.
Also, added some improvements to the macro, such as removing the
assumption of VA_USER_SV57 being the largest address space.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240103160024.70305-3-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- Changes to FPU handling came in via the main s390 pull request
- Only deliver to the guest the SCLP events that userspace has
requested
- More virtual vs physical address fixes (only a cleanup since
virtual and physical address spaces are currently the same)
- Fix selftests undefined behavior
x86:
- Fix a restriction that the guest can't program a PMU event whose
encoding matches an architectural event that isn't included in the
guest CPUID. The enumeration of an architectural event only says
that if a CPU supports an architectural event, then the event can
be programmed *using the architectural encoding*. The enumeration
does NOT say anything about the encoding when the CPU doesn't
report support the event *in general*. It might support it, and it
might support it using the same encoding that made it into the
architectural PMU spec
- Fix a variety of bugs in KVM's emulation of RDPMC (more details on
individual commits) and add a selftest to verify KVM correctly
emulates RDMPC, counter availability, and a variety of other
PMC-related behaviors that depend on guest CPUID and therefore are
easier to validate with selftests than with custom guests (aka
kvm-unit-tests)
- Zero out PMU state on AMD if the virtual PMU is disabled, it does
not cause any bug but it wastes time in various cases where KVM
would check if a PMC event needs to be synthesized
- Optimize triggering of emulated events, with a nice ~10%
performance improvement in VM-Exit microbenchmarks when a vPMU is
exposed to the guest
- Tighten the check for "PMI in guest" to reduce false positives if
an NMI arrives in the host while KVM is handling an IRQ VM-Exit
- Fix a bug where KVM would report stale/bogus exit qualification
information when exiting to userspace with an internal error exit
code
- Add a VMX flag in /proc/cpuinfo to report 5-level EPT support
- Rework TDP MMU root unload, free, and alloc to run with mmu_lock
held for read, e.g. to avoid serializing vCPUs when userspace
deletes a memslot
- Tear down TDP MMU page tables at 4KiB granularity (used to be
1GiB). KVM doesn't support yielding in the middle of processing a
zap, and 1GiB granularity resulted in multi-millisecond lags that
are quite impolite for CONFIG_PREEMPT kernels
- Allocate write-tracking metadata on-demand to avoid the memory
overhead when a kernel is built with i915 virtualization support
but the workloads use neither shadow paging nor i915 virtualization
- Explicitly initialize a variety of on-stack variables in the
emulator that triggered KMSAN false positives
- Fix the debugregs ABI for 32-bit KVM
- Rework the "force immediate exit" code so that vendor code
ultimately decides how and when to force the exit, which allowed
some optimization for both Intel and AMD
- Fix a long-standing bug where kvm_has_noapic_vcpu could be left
elevated if vCPU creation ultimately failed, causing extra
unnecessary work
- Cleanup the logic for checking if the currently loaded vCPU is
in-kernel
- Harden against underflowing the active mmu_notifier invalidation
count, so that "bad" invalidations (usually due to bugs elsehwere
in the kernel) are detected earlier and are less likely to hang the
kernel
x86 Xen emulation:
- Overlay pages can now be cached based on host virtual address,
instead of guest physical addresses. This removes the need to
reconfigure and invalidate the cache if the guest changes the gpa
but the underlying host virtual address remains the same
- When possible, use a single host TSC value when computing the
deadline for Xen timers in order to improve the accuracy of the
timer emulation
- Inject pending upcall events when the vCPU software-enables its
APIC to fix a bug where an upcall can be lost (and to follow Xen's
behavior)
- Fall back to the slow path instead of warning if "fast" IRQ
delivery of Xen events fails, e.g. if the guest has aliased xAPIC
IDs
RISC-V:
- Support exception and interrupt handling in selftests
- New self test for RISC-V architectural timer (Sstc extension)
- New extension support (Ztso, Zacas)
- Support userspace emulation of random number seed CSRs
ARM:
- Infrastructure for building KVM's trap configuration based on the
architectural features (or lack thereof) advertised in the VM's ID
registers
- Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
x86's WC) at stage-2, improving the performance of interacting with
assigned devices that can tolerate it
- Conversion of KVM's representation of LPIs to an xarray, utilized
to address serialization some of the serialization on the LPI
injection path
- Support for _architectural_ VHE-only systems, advertised through
the absence of FEAT_E2H0 in the CPU's ID register
- Miscellaneous cleanups, fixes, and spelling corrections to KVM and
selftests
LoongArch:
- Set reserved bits as zero in CPUCFG
- Start SW timer only when vcpu is blocking
- Do not restart SW timer when it is expired
- Remove unnecessary CSR register saving during enter guest
- Misc cleanups and fixes as usual
Generic:
- Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
always true on all architectures except MIPS (where Kconfig
determines the available depending on CPU capabilities). It is
replaced either by an architecture-dependent symbol for MIPS, and
IS_ENABLED(CONFIG_KVM) everywhere else
- Factor common "select" statements in common code instead of
requiring each architecture to specify it
- Remove thoroughly obsolete APIs from the uapi headers
- Move architecture-dependent stuff to uapi/asm/kvm.h
- Always flush the async page fault workqueue when a work item is
being removed, especially during vCPU destruction, to ensure that
there are no workers running in KVM code when all references to
KVM-the-module are gone, i.e. to prevent a very unlikely
use-after-free if kvm.ko is unloaded
- Grab a reference to the VM's mm_struct in the async #PF worker
itself instead of gifting the worker a reference, so that there's
no need to remember to *conditionally* clean up after the worker
Selftests:
- Reduce boilerplate especially when utilize selftest TAP
infrastructure
- Add basic smoke tests for SEV and SEV-ES, along with a pile of
library support for handling private/encrypted/protected memory
- Fix benign bugs where tests neglect to close() guest_memfd files"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
selftests: kvm: remove meaningless assignments in Makefiles
KVM: riscv: selftests: Add Zacas extension to get-reg-list test
RISC-V: KVM: Allow Zacas extension for Guest/VM
KVM: riscv: selftests: Add Ztso extension to get-reg-list test
RISC-V: KVM: Allow Ztso extension for Guest/VM
RISC-V: KVM: Forward SEED CSR access to user space
KVM: riscv: selftests: Add sstc timer test
KVM: riscv: selftests: Change vcpu_has_ext to a common function
KVM: riscv: selftests: Add guest helper to get vcpu id
KVM: riscv: selftests: Add exception handling support
LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
LoongArch: KVM: Do not restart SW timer when it is expired
LoongArch: KVM: Start SW timer only when vcpu is blocking
LoongArch: KVM: Set reserved bits as zero in CPUCFG
KVM: selftests: Explicitly close guest_memfd files in some gmem tests
KVM: x86/xen: fix recursive deadlock in timer injection
KVM: pfncache: simplify locking and make more self-contained
KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
KVM: x86/xen: improve accuracy of Xen timers
...
|
|
The term "preempt_v" represents the RISCV_PREEMPT_V field of riscv_v_flags
and is used in lots of comments.
Here corrects the miss-spelling "prempt_v". And s/acheived/achieved/.
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/20240221100252.3990445-1-songshuaishuai@tinylab.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
On riscv, mmap currently returns an address from the largest address
space that can fit entirely inside of the hint address. This makes it
such that the hint address is almost never returned. This patch raises
the mappable area up to and including the hint address. This allows mmap
to often return the hint address, which allows a performance improvement
over searching for a valid address as well as making the behavior more
similar to other architectures.
Note that a previous patch introduced stronger semantics compared to
other architectures for riscv mmap. On riscv, mmap will not use bits in
the upper bits of the virtual address depending on the hint address. On
other architectures, a random address is returned in the address space
requested. On all architectures the hint address will be returned if it
is available. This allows riscv applications to configure how many bits
in the virtual address should be left empty. This has the two benefits
of being able to request address spaces that are smaller than the
default and doesn't require the application to know the page table
layout of riscv.
* b4-shazam-merge:
docs: riscv: Define behavior of mmap
selftests: riscv: Generalize mm selftests
riscv: mm: Use hint address in mmap if available
Link: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v3-0-8a655cfa8bcb@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
If the hardware unaligned access speed is known at compile time, it is
possible to avoid running the unaligned access speed probe to speedup
boot-time.
* b4-shazam-merge:
riscv: Set unaligned access speed at compile time
riscv: Decouple emulated unaligned accesses from access speed
riscv: Only check online cpus for emulated accesses
riscv: lib: Introduce has_fast_unaligned_access()
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-0-a388770ba0ce@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Yu Chien Peter Lin <peterlin@andestech.com> says:
This patch series introduces the Andes PMU extension, which serves the
same purpose as Sscofpmf and Smcntrpmf. Its non-standard local interrupt
is assigned to bit 18 in the custom S-mode local interrupt enable and
pending registers (slie/slip), while the interrupt cause is (256 + 18).
* b4-shazam-merge:
riscv: andes: Support specifying symbolic firmware and hardware raw events
riscv: dts: renesas: Add Andes PMU extension for r9a07g043f
dt-bindings: riscv: Add Andes PMU extension description
perf: RISC-V: Introduce Andes PMU to support perf event sampling
perf: RISC-V: Eliminate redundant interrupt enable/disable operations
riscv: dts: renesas: r9a07g043f: Update compatible string to use Andes INTC
dt-bindings: riscv: Add Andes interrupt controller compatible string
riscv: errata: Rename defines for Andes
Link: https://lore.kernel.org/r/20240222083946.3977135-1-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
I'm picking this up on top of the broken patch for the merge window, as
the offending patch breaks the rv32 build and was itself a fix so isn't
on for-next.
* b4-shazam-merge:
riscv: Fix compilation error with FAST_GUP and rv32
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
Link: https://lore.kernel.org/r/20240304080247.387710-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
By surrounding the definition of pte_leaf_size() with a ifdef napot as
it should have been.
Fixes: e0fe5ab4192c ("riscv: Fix pte_leaf_size() for NAPOT")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20240304080247.387710-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
|
|
On riscv it is guaranteed that the address returned by mmap is less than
the hint address. Allow mmap to return an address all the way up to
addr, if provided, rather than just up to the lower address space.
This provides a performance benefit as well, allowing mmap to exit after
checking that the address is in range rather than searching for a valid
address.
It is possible to provide an address that uses at most the same number
of bits, however it is significantly more computationally expensive to
provide that number rather than setting the max to be the hint address.
There is the instruction clz/clzw in Zbb that returns the highest set bit
which could be used to performantly implement this, but it would still
be slower than the current implementation. At worst case, half of the
address would not be able to be allocated when a hint address is
provided.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240130-use_mmap_hint_address-v3-1-8a655cfa8bcb@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Introduce Kconfig options to set the kernel unaligned access support.
These options provide a non-portable alternative to the runtime
unaligned access probe.
To support this, the unaligned access probing code is moved into it's
own file and gated behind a new RISCV_PROBE_UNALIGNED_ACCESS_SUPPORT
option.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-4-a388770ba0ce@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Detecting if a system traps into the kernel on an unaligned access
can be performed separately from checking the speed of unaligned
accesses. This decoupling will make it possible to selectively enable
or disable each of these checks.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-3-a388770ba0ce@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The unaligned access checker only sets valid values for online cpus.
Check for these values on online cpus rather than on present cpus.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 71c54b3d169d ("riscv: report misaligned accesses emulation to hwprobe")
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-2-a388770ba0ce@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Create has_fast_unaligned_access to avoid needing to explicitly check
the fast_misaligned_access_speed_key static key.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-1-a388770ba0ce@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through
Kconfig, intended to help with a vdso rework that needs the
constant but cannot include the normal kernel headers when building
the compat VDSO on arm64 and potentially others
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused"
* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: define CONFIG_PAGE_SIZE_*KB on all architectures
arch: simplify architecture specific page size configuration
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
|
|
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
|
|
xandespmu stands for Andes Performance Monitor Unit extension.
Based on the added Andes PMU ISA string, the SBI PMU driver
will make use of the non-standard irq source.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240222083946.3977135-10-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Assign riscv_pmu_irq_num the value of (256 + 18) for the custome PMU
and add SSCOUNTOVF and SIP alternatives to ALT_SBI_PMU_OVERFLOW()
and ALT_SBI_PMU_OVF_CLEAR_PENDING() macros, respectively.
To make use of Andes PMU extension, "xandespmu" needs to be appended
to the riscv,isa-extensions for each cpu node in device-tree, and
make sure CONFIG_ANDES_CUSTOM_PMU is enabled.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Co-developed-by: Locus Wei-Han Chen <locus84@andestech.com>
Signed-off-by: Locus Wei-Han Chen <locus84@andestech.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-8-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The Andes hart-level interrupt controller (Andes INTC) allows AX45MP
cores to handle custom local interrupts, such as the performance
counter overflow interrupt.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240222083946.3977135-6-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Use "ANDES" rather than "ANDESTECH" to unify the naming
convention with directory, file names, Kconfig options
and other definitions.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Charles Ci-Jyun Wu <dminus@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20240222083946.3977135-2-peterlin@andestech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups, including a large series from Thomas Gleixner to cure
sparse warnings"
* tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Drop unused declaration of proc_nmi_enabled()
x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables
x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation
x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current
x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address()
x86/percpu: Cure per CPU madness on UP
smp: Consolidate smp_prepare_boot_cpu()
x86/msr: Add missing __percpu annotations
x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h>
perf/x86/amd/uncore: Fix __percpu annotation
x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP)
x86/apm_32: Remove dead function apm_get_battery_status()
x86/insn-eval: Fix function param name in get_eff_addr_sib()
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2024-03-11
We've added 59 non-merge commits during the last 9 day(s) which contain
a total of 88 files changed, 4181 insertions(+), 590 deletions(-).
The main changes are:
1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena,
from Alexei.
2) Introduce bpf_arena which is sparse shared memory region between bpf
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly for
both user-space programs and bpf programs, from Alexei and Andrii.
3) Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it, from Alexei.
4) Use IETF format for field definitions in the BPF standard
document, from Dave.
5) Extend struct_ops libbpf APIs to allow specify version suffixes for
stuct_ops map types, share the same BPF program between several map
definitions, and other improvements, from Eduard.
6) Enable struct_ops support for more than one page in trampolines,
from Kui-Feng.
7) Support kCFI + BPF on riscv64, from Puranjay.
8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay.
9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke.
====================
Link: https://lore.kernel.org/r/20240312003646.8692-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A large set of updates and features for timers and timekeeping:
- The hierarchical timer pull model
When timer wheel timers are armed they are placed into the timer
wheel of a CPU which is likely to be busy at the time of expiry.
This is done to avoid wakeups on potentially idle CPUs.
This is wrong in several aspects:
1) The heuristics to select the target CPU are wrong by
definition as the chance to get the prediction right is
close to zero.
2) Due to #1 it is possible that timers are accumulated on
a single target CPU
3) The required computation in the enqueue path is just overhead
for dubious value especially under the consideration that the
vast majority of timer wheel timers are either canceled or
rearmed before they expire.
The timer pull model avoids the above by removing the target
computation on enqueue and queueing timers always on the CPU on
which they get armed.
This is achieved by having separate wheels for CPU pinned timers
and global timers which do not care about where they expire.
As long as a CPU is busy it handles both the pinned and the global
timers which are queued on the CPU local timer wheels.
When a CPU goes idle it evaluates its own timer wheels:
- If the first expiring timer is a pinned timer, then the global
timers can be ignored as the CPU will wake up before they
expire.
- If the first expiring timer is a global timer, then the expiry
time is propagated into the timer pull hierarchy and the CPU
makes sure to wake up for the first pinned timer.
The timer pull hierarchy organizes CPUs in groups of eight at the
lowest level and at the next levels groups of eight groups up to
the point where no further aggregation of groups is required, i.e.
the number of levels is log8(NR_CPUS). The magic number of eight
has been established by experimention, but can be adjusted if
needed.
In each group one busy CPU acts as the migrator. It's only one CPU
to avoid lock contention on remote timer wheels.
The migrator CPU checks in its own timer wheel handling whether
there are other CPUs in the group which have gone idle and have
global timers to expire. If there are global timers to expire, the
migrator locks the remote CPU timer wheel and handles the expiry.
Depending on the group level in the hierarchy this handling can
require to walk the hierarchy downwards to the CPU level.
Special care is taken when the last CPU goes idle. At this point
the CPU is the systemwide migrator at the top of the hierarchy and
it therefore cannot delegate to the hierarchy. It needs to arm its
own timer device to expire either at the first expiring timer in
the hierarchy or at the first CPU local timer, which ever expires
first.
This completely removes the overhead from the enqueue path, which
is e.g. for networking a true hotpath and trades it for a slightly
more complex idle path.
This has been in development for a couple of years and the final
series has been extensively tested by various teams from silicon
vendors and ran through extensive CI.
There have been slight performance improvements observed on network
centric workloads and an Intel team confirmed that this allows them
to power down a die completely on a mult-die socket for the first
time in a mostly idle scenario.
There is only one outstanding ~1.5% regression on a specific
overloaded netperf test which is currently investigated, but the
rest is either positive or neutral performance wise and positive on
the power management side.
- Fixes for the timekeeping interpolation code for cross-timestamps:
cross-timestamps are used for PTP to get snapshots from hardware
timers and interpolated them back to clock MONOTONIC. The changes
address a few corner cases in the interpolation code which got the
math and logic wrong.
- Simplifcation of the clocksource watchdog retry logic to
automatically adjust to handle larger systems correctly instead of
having more incomprehensible command line parameters.
- Treewide consolidation of the VDSO data structures.
- The usual small improvements and cleanups all over the place"
* tag 'timers-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
timer/migration: Fix quick check reporting late expiry
tick/sched: Fix build failure for CONFIG_NO_HZ_COMMON=n
vdso/datapage: Quick fix - use asm/page-def.h for ARM64
timers: Assert no next dyntick timer look-up while CPU is offline
tick: Assume timekeeping is correctly handed over upon last offline idle call
tick: Shut down low-res tick from dying CPU
tick: Split nohz and highres features from nohz_mode
tick: Move individual bit features to debuggable mask accesses
tick: Move got_idle_tick away from common flags
tick: Assume the tick can't be stopped in NOHZ_MODE_INACTIVE mode
tick: Move broadcast cancellation up to CPUHP_AP_TICK_DYING
tick: Move tick cancellation up to CPUHP_AP_TICK_DYING
tick: Start centralizing tick related CPU hotplug operations
tick/sched: Don't clear ts::next_tick again in can_stop_idle_tick()
tick/sched: Rename tick_nohz_stop_sched_tick() to tick_nohz_full_stop_tick()
tick: Use IS_ENABLED() whenever possible
tick/sched: Remove useless oneshot ifdeffery
tick/nohz: Remove duplicate between lowres and highres handlers
tick/nohz: Remove duplicate between tick_nohz_switch_to_nohz() and tick_setup_sched_timer()
hrtimer: Select housekeeping CPU during migration
...
|
|
KVM/riscv changes for 6.9
- Exception and interrupt handling for selftests
- Sstc (aka arch_timer) selftest
- Forward seed CSR access to KVM userspace
- Ztso extension support for Guest/VM
- Zacas extension support for Guest/VM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.9
* Set reserved bits as zero in CPUCFG.
* Start SW timer only when vcpu is blocking.
* Do not restart SW timer when it is expired.
* Remove unnecessary CSR register saving during enter guest.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetree fixes for v6.8-final
Starfive:
The previous cleanup broke boot on the jh7100 as the driver depended on
the fallback clock name created based on the node-name when
clock-output-names is not present. Add clock-output-names to restore
working order.
Generic:
BUILTIN_DTB has been broken for ages on any platform other than the
nommu Canaan k210 SoC as the first dtb built (in alphanumerical order),
would get built into the image. This didn't get fixed for ages because
nobody actually cared about running it other than the k210 enough to
fix it. The folks doing Sophgo SG2042 development have come along and
fixed it, as they want to use builtin dtbs. linux-boot on that platform
reuses the dtb it was provided by OpenSBI when booting linux proper,
which is unfortunately not possible to boot a mainline kernel with.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.8-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
Link: https://lore.kernel.org/r/20240306-waltz-facial-9e4e1b792053@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/kvm-x86/linux into HEAD
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The riscv BPF JIT doesn't emit proper kCFI prologues for BPF programs
and struct_ops trampolines when CONFIG_CFI_CLANG is enabled.
This causes CFI failures when calling BPF programs and can even crash
the kernel due to invalid memory accesses.
Example crash:
root@rv-selftester:~/bpf# ./test_progs -a dummy_st_ops
Unable to handle kernel paging request at virtual address ffffffff78204ffc
Oops [#1]
Modules linked in: bpf_testmod(OE) [....]
CPU: 3 PID: 356 Comm: test_progs Tainted: P OE 6.8.0-rc1 #1
Hardware name: riscv-virtio,qemu (DT)
epc : bpf_struct_ops_test_run+0x28c/0x5fc
ra : bpf_struct_ops_test_run+0x26c/0x5fc
epc : ffffffff82958010 ra : ffffffff82957ff0 sp : ff200000007abc80
gp : ffffffff868d6218 tp : ff6000008d87b840 t0 : 000000000000000f
t1 : 0000000000000000 t2 : 000000002005793e s0 : ff200000007abcf0
s1 : ff6000008a90fee0 a0 : 0000000000000000 a1 : 0000000000000000
a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
a5 : ffffffff868dba26 a6 : 0000000000000001 a7 : 0000000052464e43
s2 : 00007ffffc0a95f0 s3 : ff6000008a90fe80 s4 : ff60000084c24c00
s5 : ffffffff78205000 s6 : ff60000088750648 s7 : ff20000000035008
s8 : fffffffffffffff4 s9 : ffffffff86200610 s10: 0000000000000000
s11: 0000000000000000 t3 : ffffffff8483dc30 t4 : ffffffff8483dc10
t5 : ffffffff8483dbf0 t6 : ffffffff8483dbd0
status: 0000000200000120 badaddr: ffffffff78204ffc cause: 000000000000000d
[<ffffffff82958010>] bpf_struct_ops_test_run+0x28c/0x5fc
[<ffffffff805083ee>] bpf_prog_test_run+0x170/0x548
[<ffffffff805029c8>] __sys_bpf+0x2d2/0x378
[<ffffffff804ff570>] __riscv_sys_bpf+0x5c/0x120
[<ffffffff8000e8fe>] syscall_handler+0x62/0xe4
[<ffffffff83362df6>] do_trap_ecall_u+0xc6/0x27c
[<ffffffff833822c4>] ret_from_exception+0x0/0x64
Code: b603 0109 b683 0189 b703 0209 8493 0609 157d 8d65 (a303) ffca
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception
SMP: stopping secondary CPUs
Implement proper kCFI prologues for the BPF programs and callbacks and
drop __nocfi for riscv64. Fix the trampoline generation code to emit kCFI
prologue when a struct_ops trampoline is being prepared.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240303170207.82201-2-puranjay12@gmail.com
|
|
Even if pXd_leaf() API is defined globally, it's not clear on the retval,
and there are three types used (bool, int, unsigned log).
Always return a boolean for pXd_leaf() APIs.
Link: https://lkml.kernel.org/r/20240305043750.93762-11-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Most architectures only support a single hardcoded page size. In order
to ensure that each one of these sets the corresponding Kconfig symbols,
change over the PAGE_SHIFT definition to the common one and allow
only the hardware page size to be selected.
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Zacas extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Extend the KVM ISA extension ONE_REG interface to allow KVM user space
to detect and enable Ztso extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The SEED CSR access from VS/VU mode (guest) will always trap to
HS-mode (KVM) when Zkr extension is available to the Guest/VM.
Forward this CSR access to KVM user space so that it can be
emulated based on the method chosen by VMM.
Fixes: f370b4e668f0 ("RISC-V: KVM: Allow scalar crypto extensions for Guest/VM")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/late
RISC-V Devicetrees for v6.9
Microchip:
Missing bus clocks for the CAN controllers spotted during the creation
of a driver for the controllers and a specific compatible for the SiFive
PDMA block on PolarFire SoC.
Starfive:
PWM nodes for the jh7100 and jh7110. Camera subsystem support for the
latter. Most notably however is the addition of ethernet support for the
jh7110 which finally allows people to use the network on the OG VisionFive
and on the Beagle-V Starlight board. This was made possible by the
non-standard cache management operations support added for the RZ/Five
which could be extended to the ccache present on the jh7100.
bindings:
Additional clarification for what the reg property represents for cpus
and two opencores PWM binding changes - the original addition and an
added compatible. The latter is here as the driver patch was not ready
but the PWM maintainer told me to go ahead and merge it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: jh7110: Add camera subsystem nodes
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
riscv: dts: starfive: beaglev-starlight: Setup phy reset gpio
riscv: dts: starfive: visionfive-v1: Setup ethernet phy
riscv: dts: starfive: jh7100-common: Setup pinmux and enable gmac
riscv: dts: starfive: jh7100: Add sysmain and gmac DT nodes
riscv: dts: starfive: jh7110: Add PWM node and pins configuration
riscv: dts: starfive: jh7100: Add PWM node and pins configuration
dt-bindings: pwm: Add bindings for OpenCores PWM Controller
Link: https://lore.kernel.org/r/20240305-iodine-moneywise-53797ae9bf6e@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The BUILTIN_DTB_SOURCE was only configured for K210 before. Since
SOC_BUILTIN_DTB_DECLARE was removed at commit d5805af9fe9f ("riscv: Fix
builtin DTB handling") from patch [1], the kernel cannot choose one of the
dtbs from then on and always take the first one dtb to use. Then, another
commit 0ddd7eaffa64 ("riscv: Fix BUILTIN_DTB for sifive and microchip soc")
from patch [2] supports BUILTIN_DTB_SOURCE for other SoCs. However, this
feature will only work if the Kconfig we use links the dtb we expected in
the first place as mentioned in the thread [3]. Thus, a config
BUILTIN_DTB_SOURCE is needed for all SoCs to choose one dtb to use.
For some considerations, this patch also removes default y if XIP_KERNEL
for BUILTIN_DTB, as this requires setting a proper dtb to use on the
BUILTIN_DTB_SOURCE, else the kernel with XIP but does not set
BUILTIN_DTB_SOURCE or unselect BUILTIN_DTB will not boot.
Also, this patch removes the default dtb string for k210 from Kconfig to
nommu_k210_defconfig and nommu_k210_sdcard_defconfig to avoid complex
Kconfig settings for other SoCs in the future.
[1] https://lore.kernel.org/linux-riscv/20201208073355.40828-5-damien.lemoal@wdc.com/
[2] https://lore.kernel.org/linux-riscv/20210604120639.1447869-1-alex@ghiti.fr/
[3] https://lore.kernel.org/linux-riscv/CAK7LNATt_56mO2Le4v4EnPnAfd3gC8S_Sm5-GCsfa=qXy=8Lrg@mail.gmail.com/
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
JH7100 clock controller driver depends on certain root clock names.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWw0dteXO2jw4cwGvzKcL6vmnb96C=qgPgUqNDMtF6X0Q@mail.gmail.com/
Fixes: f03606470886 ("riscv: dts: starfive: replace underscores in node names")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
There is no point in having seven architectures implementing the same empty
stub.
Provide a weak function in the init code and remove the stubs.
This also allows to utilize the function on UP which is required to
sanitize the per CPU handling on X86 UP.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.567671691@linutronix.de
|
|
soc/dt
RISC-V Devicetrees for v6.9
Sophgo:
Added reset support for SG2042.
Also updated maintainer information for SOPHGO vendor support.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.9' of https://github.com/sophgo/linux:
MAINTAINERS: Setup proper info for SOPHGO vendor support
riscv: dts: add resets property for uart node
riscv: dts: add reset generator for Sophgo SG2042 SoC
Link: https://lore.kernel.org/r/MA0P287MB2822315119DA51FF95EE3071FE5D2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- detect ".option arch" support on not-yet-released LLVM builds
- fix missing TLB flush when modifying non-leaf PTEs
- fixes for T-Head custom extensions
- fix for systems with the legacy PMU, that manifests as a crash on
kernels built without SBI PMU support
- fix for systems that clear *envcfg on suspend, which manifests as
cbo.zero trapping after resume
- fixes for Svnapot systems, including removing Svnapot support for
huge vmalloc/vmap regions
* tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Sparse-Memory/vmemmap out-of-bounds fix
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
perf: RISCV: Fix panic on pmu overflow handler
MAINTAINERS: Update SiFive driver maintainers
drivers: perf: ctr_get_width function for legacy is not defined
drivers: perf: added capabilities for legacy PMU
RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs
riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
riscv: mm: fix NOCACHE_THEAD does not set bit[61] correctly
riscv: add CALLER_ADDRx support
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
riscv: tlb: fix __p*d_free_tlb()
|
|
Add camera subsystem nodes for the StarFive JH7110 SoC. They contain the
dphy-rx, csi2rx, camss nodes.
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Offset vmemmap so that the first page of vmemmap will be mapped
to the first page of physical memory in order to ensure that
vmemmap’s bounds will be respected during
pfn_to_page()/page_to_pfn() operations.
The conversion macros will produce correct SV39/48/57 addresses
for every possible/valid DRAM_BASE inside the physical memory limits.
v2:Address Alex's comments
Suggested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Dimitris Vlachos <dvlachos@ics.forth.gr>
Reported-by: Dimitris Vlachos <dvlachos@ics.forth.gr>
Closes: https://lore.kernel.org/linux-riscv/20240202135030.42265-1-csd4492@csd.uoc.gr
Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240229191723.32779-1-dvlachos@ics.forth.gr
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Alexandre Ghiti <alexghiti@rivosinc.com> says:
This contains 2 fixes for NAPOT: patch 1 disables the use of NAPOT
mapping for vmalloc/vmap and patch 2 implements pte_leaf_size() to
report NAPOT size.
* b4-shazam-merge:
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
Link: https://lore.kernel.org/r/20240227205016.121901-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
pte_leaf_size() must be reimplemented to add support for NAPOT mappings.
Fixes: 82a1a1f3bfb6 ("riscv: mm: support Svnapot in hugetlb page")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240227205016.121901-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
This reverts commit ce173474cf19fe7fbe8f0fc74e3c81ec9c3d9807.
We cannot correctly deal with NAPOT mappings in vmalloc/vmap because if
some part of a NAPOT mapping is unmapped, the remaining mapping is not
updated accordingly. For example:
ptr = vmalloc_huge(64 * 1024, GFP_KERNEL);
vunmap_range((unsigned long)(ptr + PAGE_SIZE),
(unsigned long)(ptr + 64 * 1024));
leads to the following kernel page table dump:
0xffff8f8000ef0000-0xffff8f8000ef1000 0x00000001033c0000 4K PTE N .. .. D A G . . W R V
Meaning the first entry which was not unmapped still has the N bit set,
which, if accessed first and cached in the TLB, could allow access to the
unmapped range.
That's because the logic to break the NAPOT mapping does not exist and
likely won't. Indeed, to break a NAPOT mapping, we first have to clear
the whole mapping, flush the TLB and then set the new mapping ("break-
before-make" equivalent). That works fine in userspace since we can handle
any pagefault occurring on the remaining mapping but we can't handle a kernel
pagefault on such mapping.
So fix this by reverting the commit that introduced the vmap/vmalloc
support.
Fixes: ce173474cf19 ("riscv: mm: support Svnapot in huge vmap")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240227205016.121901-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Samuel Holland <samuel.holland@sifive.com> says:
This series fixes a couple of issues related to using the cbo.zero
instruction in userspace. The first patch fixes a bug where the wrong
enable bit gets set if the kernel is running in M-mode. The remaining
patches fix a bug where the enable bit gets reset to its default value
after a nonretentive idle state. I have hardware which reproduces this:
Before this series:
$ tools/testing/selftests/riscv/hwprobe/cbo
TAP version 13
1..3
ok 1 Zicboz block size
# Zicboz block size: 64
Illegal instruction
After applying this series:
$ tools/testing/selftests/riscv/hwprobe/cbo
TAP version 13
1..3
ok 1 Zicboz block size
# Zicboz block size: 64
ok 2 cbo.zero
ok 3 cbo.zero check
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
* b4-shazam-merge:
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
Link: https://lore.kernel.org/r/20240228065559.3434837-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The value of the [ms]envcfg CSR is lost when entering a nonretentive
idle state, so the CSR must be rewritten when resuming the CPU.
Cc: <stable@vger.kernel.org> # v6.7+
Fixes: 43c16d51a19b ("RISC-V: Enable cbo.zero in usermode")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240228065559.3434837-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The [ms]envcfg CSR was added in version 1.12 of the RISC-V privileged
ISA (aka S[ms]1p12). However, bits in this CSR are defined by several
other extensions which may be implemented separately from any particular
version of the privileged ISA (for example, some unrelated errata may
prevent an implementation from claiming conformance with Ss1p12). As a
result, Linux cannot simply use the privileged ISA version to determine
if the CSR is present. It must also check if any of these other
extensions are implemented. It also cannot probe the existence of the
CSR at runtime, because Linux does not require Sstrict, so (in the
absence of additional information) it cannot know if a CSR at that
address is [ms]envcfg or part of some non-conforming vendor extension.
Since there are several standard extensions that imply the existence of
the [ms]envcfg CSR, it becomes unwieldy to check for all of them
wherever the CSR is accessed. Instead, define a custom Xlinuxenvcfg ISA
extension bit that is implied by the other extensions and denotes that
the CSR exists as defined in the privileged ISA, containing at least one
of the fields common between menvcfg and senvcfg.
This extension does not need to be parsed from the devicetree or ISA
string because it can only be implemented as a subset of some other
standard extension.
Cc: <stable@vger.kernel.org> # v6.7+
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240228065559.3434837-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When the kernel is running in M-mode, the CBZE bit must be set in the
menvcfg CSR, not in senvcfg.
Cc: <stable@vger.kernel.org>
Fixes: 43c16d51a19b ("RISC-V: Enable cbo.zero in usermode")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240228065559.3434837-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
LLVM commit 8e01042da9d3 ("[RISCV] Add missing dependency check for Zvkb
(#79467)") broke the check used by the TOOLCHAIN_HAS_VECTOR_CRYPTO
kconfig symbol because it made zvkb start depending on v or zve*. Fix
this by specifying both v and zvkb when checking for support for zvkb.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240127090055.124336-1-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
These fixes are a dependency for the Zvkb patches, so I'm merging them
into for-next as well as fixes.
* commit '3aff0c459e77':
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
|
|
Now crash codes under kernel/ folder has been split out from kexec
code, crash dumping can be separated from kexec reboot in config
items on risc-v with some adjustments.
Here wrap up crash dumping codes with CONFIG_CRASH_DUMP ifdeffery, and
use IS_ENABLED(CONFIG_CRASH_RESERVE) check to decide if compiling
in the crashkernel reservation code.
Link: https://lkml.kernel.org/r/20240124051254.67105-13-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.
And add config item CRASH_RESERVE to control its enabling.
And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.
And also do renaming as follows:
- arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.
And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.
[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Split crash out from kexec and clean up related config
items", v3.
Motivation:
=============
Previously, LKP reported a building error. When investigating, it can't
be resolved reasonablly with the present messy kdump config items.
https://lore.kernel.org/oe-kbuild-all/202312182200.Ka7MzifQ-lkp@intel.com/
The kdump (crash dumping) related config items could causes confusions:
Firstly,
CRASH_CORE enables codes including
- crashkernel reservation;
- elfcorehdr updating;
- vmcoreinfo exporting;
- crash hotplug handling;
Now fadump of powerpc, kcore dynamic debugging and kdump all selects
CRASH_CORE, while fadump
- fadump needs crashkernel parsing, vmcoreinfo exporting, and accessing
global variable 'elfcorehdr_addr';
- kcore only needs vmcoreinfo exporting;
- kdump needs all of the current kernel/crash_core.c.
So only enabling PROC_CORE or FA_DUMP will enable CRASH_CORE, this
mislead people that we enable crash dumping, actual it's not.
Secondly,
It's not reasonable to allow KEXEC_CORE select CRASH_CORE.
Because KEXEC_CORE enables codes which allocate control pages, copy
kexec/kdump segments, and prepare for switching. These codes are
shared by both kexec reboot and kdump. We could want kexec reboot,
but disable kdump. In that case, CRASH_CORE should not be selected.
--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
---------------------
Thirdly,
It's not reasonable to allow CRASH_DUMP select KEXEC_CORE.
That could make KEXEC_CORE, CRASH_DUMP are enabled independently from
KEXEC or KEXEC_FILE. However, w/o KEXEC or KEXEC_FILE, the KEXEC_CORE
code built in doesn't make any sense because no kernel loading or
switching will happen to utilize the KEXEC_CORE code.
---------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
---------------------
In this case, what is worse, on arch sh and arm, KEXEC relies on MMU,
while CRASH_DUMP can still be enabled when !MMU, then compiling error is
seen as the lkp test robot reported in above link.
------arch/sh/Kconfig------
config ARCH_SUPPORTS_KEXEC
def_bool MMU
config ARCH_SUPPORTS_CRASH_DUMP
def_bool BROKEN_ON_SMP
---------------------------
Changes:
===========
1, split out crash_reserve.c from crash_core.c;
2, split out vmcore_infoc. from crash_core.c;
3, move crash related codes in kexec_core.c into crash_core.c;
4, remove dependency of FA_DUMP on CRASH_DUMP;
5, clean up kdump related config items;
6, wrap up crash codes in crash related ifdefs on all 8 arch-es
which support crash dumping, except of ppc;
Achievement:
===========
With above changes, I can rearrange the config item logic as below (the right
item depends on or is selected by the left item):
PROC_KCORE -----------> VMCORE_INFO
|----------> VMCORE_INFO
FA_DUMP----|
|----------> CRASH_RESERVE
---->VMCORE_INFO
/
|---->CRASH_RESERVE
KEXEC --| /|
|--> KEXEC_CORE--> CRASH_DUMP-->/-|---->PROC_VMCORE
KEXEC_FILE --| \ |
\---->CRASH_HOTPLUG
KEXEC --|
|--> KEXEC_CORE (for kexec reboot only)
KEXEC_FILE --|
Test
========
On all 8 architectures, including x86_64, arm64, s390x, sh, arm, mips,
riscv, loongarch, I did below three cases of config item setting and
building all passed. Take configs on x86_64 as exampmle here:
(1) Both CONFIG_KEXEC and KEXEC_FILE is unset, then all kexec/kdump
items are unset automatically:
# Kexec and crash features
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# end of Kexec and crash features
(2) set CONFIG_KEXEC_FILE and 'make olddefconfig':
---------------
# Kexec and crash features
CONFIG_CRASH_RESERVE=y
CONFIG_VMCORE_INFO=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_FILE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
CONFIG_CRASH_MAX_MEMORY_RANGES=8192
# end of Kexec and crash features
---------------
(3) unset CONFIG_CRASH_DUMP in case 2 and execute 'make olddefconfig':
------------------------
# Kexec and crash features
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_FILE=y
# end of Kexec and crash features
------------------------
Note:
For ppc, it needs investigation to make clear how to split out crash
code in arch folder. Hope Hari and Pingfan can help have a look, see if
it's doable. Now, I make it either have both kexec and crash enabled, or
disable both of them altogether.
This patch (of 14):
Both kdump and fa_dump of ppc rely on crashkernel reservation. Move the
relevant codes into separate files: crash_reserve.c,
include/linux/crash_reserve.h.
And also add config item CRASH_RESERVE to control its enabling of the
codes. And update config items which has relationship with crashkernel
reservation.
And also change ifdeffery from CONFIG_CRASH_CORE to CONFIG_CRASH_RESERVE
when those scopes are only crashkernel reservation related.
And also rename arch/XXX/include/asm/{crash_core.h => crash_reserve.h} on
arm64, x86 and risc-v because those architectures' crash_core.h is only
related to crashkernel reservation.
[akpm@linux-foundation.org: s/CRASH_RESEERVE/CRASH_RESERVE/, per Klara Modin]
Link: https://lkml.kernel.org/r/20240124051254.67105-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240124051254.67105-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Earlier, vmap_area_list is exported to vmcoreinfo so that makedumpfile get
the base address of vmalloc area. Now, vmap_area_list is empty, so export
VMALLOC_START to vmcoreinfo instead, and remove vmap_area_list.
[urezki@gmail.com: fix a warning in the crash_save_vmcoreinfo_init()]
Link: https://lkml.kernel.org/r/20240111192329.449189-1-urezki@gmail.com
Link: https://lkml.kernel.org/r/20240102184633.748113-6-urezki@gmail.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Kazuhito Hagio <k-hagio-ab@nec.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm and RISC-V SoC fixes from Arnd Bergmann:
"The Rockchip and IMX8 platforms get a number of fixes for dts files in
order to address some misconfigurations, including a regression for
USB-C support on some boards.
The other dts fixes are part of a series by Rob Herring to clean up
another class of dtc compiler warnings across all platforms, with a
few others helping out as well. With this, we can enable the warning
for the coming merge window without introducing regressions.
Conor Dooley has collected fixes for RISC-V platforms, both for the
dts files and for platofrm specific drivers.
The ep93xx platform gets a regression for for its gpio descriptors"
* tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
arm64: dts: qcom: Fix interrupt-map cell sizes
arm: dts: Fix dtc interrupt_map warnings
arm64: dts: Fix dtc interrupt_provider warnings
arm: dts: Fix dtc interrupt_provider warnings
arm64: dts: freescale: Disable interrupt_map check
ARM: ep93xx: Add terminator to gpiod_lookup_table
riscv: dts: sifive: add missing #interrupt-cells to pmic
arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node
arm64: dts: rockchip: set num-cs property for spi on px30
arm64: dts: rockchip: minor rk3588 whitespace cleanup
riscv: dts: starfive: replace underscores in node names
bus: imx-weim: fix valid range check
Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
arm64: dts: tqma8mpql: fix audio codec iov-supply
arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds
ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
...
|
|
Before attempting to support the pre-ratification version of vector
found on older T-Head CPUs, disallow "v" in riscv,isa on these
platforms. The deprecated property has no clear way to communicate
the specific version of vector that is supported and much of the vendor
provided software puts "v" in the isa string. riscv,isa-extensions
should be used instead. This should not be too much of a burden for
these systems, as the vendor shipped devicetrees and firmware do not
work with a mainline kernel and will require updating.
We can limit this restriction to only ignore v in riscv,isa on CPUs
that report T-Head's vendor ID and a zero marchid. Newer T-Head CPUs
that support the ratified version of vector should report non-zero
marchid, according to Guo Ren [1].
Link: https://lore.kernel.org/linux-riscv/CAJF2gTRy5eK73=d6s7CVy9m9pB8p4rAoMHM3cZFwzg=AuF7TDA@mail.gmail.com/ [1]
Fixes: dc6667a4e7e3 ("riscv: Extending cpufeature.c to detect V-extension")
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240223-tidings-shabby-607f086cb4d7@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fixes for v6.8-rc6
Two fixes for W=2 issues in devicetrees, which should constitute fixes
for all reasonable-to-fix W=2 problems on RISC-V. The others are caused
by standard USB and MMC property names containing underscores that are
not likely to ever change.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: sifive: add missing #interrupt-cells to pmic
riscv: dts: starfive: replace underscores in node names
Link: https://lore.kernel.org/r/20240221-foil-glade-09dbf1aa3fe2@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add resets property for uart0 for completeness, although it is
deasserted by default.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Link: https://lore.kernel.org/r/807f75e433a0f900da40ebb6a448349c98580072.1706577450.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
|
|
Add reset generator node to device tree for SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Link: https://lore.kernel.org/r/b2f5d7cd2d3fccfc00cf4563d2dd7363b0fa2fca.1706577450.git.unicorn_wang@outlook.com
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
|
|
CONFIG_CLANG_SUPPORTS_DYNAMIC_FTRACE
Now that the minimum supported version of LLVM for building the kernel has
been bumped to 13.0.1, this condition is always true, as the build will
fail during the configuration stage for older LLVM versions. Remove it.
Link: https://lkml.kernel.org/r/20240125-bump-min-llvm-ver-to-13-0-1-v1-8-f5ff9bda41c5@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that the minimum supported version of LLVM for building the kernel has
been bumped to 13.0.1, the condition for using _mcount as MCOUNT_NAME is
always true, as the build will fail during the configuration stage for
older LLVM versions. Replace MCOUNT_NAME with _mcount directly.
This effectively reverts commit 7ce047715030 ("riscv: Workaround mcount
name prior to clang-13").
Link: https://lkml.kernel.org/r/20240125-bump-min-llvm-ver-to-13-0-1-v1-7-f5ff9bda41c5@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
reviews.llvm.org was LLVM's Phabricator instances for code review. It has
been abandoned in favor of GitHub pull requests. While the majority of
links in the kernel sources still work because of the work Fangrui has
done turning the dynamic Phabricator instance into a static archive, there
are some issues with that work, so preemptively convert all the links in
the kernel sources to point to the commit on GitHub.
Most of the commits have the corresponding differential review link in the
commit message itself so there should not be any loss of fidelity in the
relevant information.
Link: https://discourse.llvm.org/t/update-on-github-pull-requests/71540/172
Link: https://lkml.kernel.org/r/20240109-update-llvm-links-v1-2-eb09b59db071@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Fangrui Song <maskray@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The new riscv specific arch_hugetlb_migration_supported() must be
guarded with a #ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION to avoid
the following build error:
In file included from include/linux/hugetlb.h:851,
from kernel/fork.c:52:
>> arch/riscv/include/asm/hugetlb.h:15:42: error: static declaration of 'arch_hugetlb_migration_supported' follows non-static declaration
15 | #define arch_hugetlb_migration_supported arch_hugetlb_migration_supported
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/hugetlb.h:916:20: note: in expansion of macro 'arch_hugetlb_migration_supported'
916 | static inline bool arch_hugetlb_migration_supported(struct hstate *h)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/hugetlb.h:14:6: note: previous declaration of 'arch_hugetlb_migration_supported' with type 'bool(struct hstate *)' {aka '_Bool(struct hstate *)'}
14 | bool arch_hugetlb_migration_supported(struct hstate *h);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402110258.CV51JlEI-lkp@intel.com/
Fixes: ce68c035457b ("riscv: Fix arch_hugetlb_migration_supported() for NAPOT")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240211083640.756583-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Previous commit dbfbda3bd6bf ("riscv: mm: update T-Head memory type
definitions") from patch [1] missed a `<` for bit shifting, result in
bit(61) does not set in _PAGE_NOCACHE_THEAD and leaves bit(0) set instead.
This patch get this fixed.
Link: https://lore.kernel.org/linux-riscv/20230912072510.2510-1-jszhang@kernel.org/ [1]
Fixes: dbfbda3bd6bf ("riscv: mm: update T-Head memory type definitions")
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/tencent_E19FA1A095768063102E654C6FC858A32F06@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
CALLER_ADDRx returns caller's address at specified level, they are used
for several tracers. These macros eventually use
__builtin_return_address(n) to get the caller's address if arch doesn't
define their own implementation.
In RISC-V, __builtin_return_address(n) only works when n == 0, we need
to walk the stack frame to get the caller's address at specified level.
data.level started from 'level + 3' due to the call flow of getting
caller's address in RISC-V implementation. If we don't have additional
three iteration, the level is corresponding to follows:
callsite -> return_address -> arch_stack_walk -> walk_stackframe
| | | |
level 3 level 2 level 1 level 0
Fixes: 10626c32e382 ("riscv/ftrace: Add basic support")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Link: https://lore.kernel.org/r/20240202015102.26251-1-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
