Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...

1 files changed, 50 insertions, 0 deletions

diff --git a/tools/testing/selftests/devices/boards/google,spherion.yaml b/tools/testing/selftests/devices/boards/google,spherion.yaml
new file mode 100644
index 00000000000000..17157ecd8c1426
--- /dev/null
+++ b/tools/testing/selftests/devices/boards/google,spherion.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# This is the device definition for the Google Spherion Chromebook.
+# The filename "google,spherion" comes from the Devicetree compatible, so this
+# file will be automatically used when the test is run on that machine.
+#
+# The top-level is a list of controllers, either for USB or PCI(e).
+# Every controller needs to have a 'type' key set to either 'usb-controller' or
+# 'pci-controller'.
+# Every controller needs to be uniquely identified on the platform. To achieve
+# this, several optional keys can be used:
+# - dt-mmio: identify the MMIO address of the controller as defined in the
+#   Devicetree.
+# - usb-version: for USB controllers to differentiate between USB3 and USB2
+#   buses sharing the same controller.
+# - acpi-uid: _UID property of the controller as supplied by the ACPI. Useful to
+#   distinguish between multiple PCI host controllers.
+#
+# The 'devices' key defines a list of devices that are accessible under that
+# controller. A device might be a leaf device or another controller (see
+# 'Dell Inc.,XPS 13 9300.yaml').
+#
+# The 'path' key is needed for every child device (that is, not top-level) to
+# define how to reach this device from the parent controller. For USB devices it
+# follows the format \d(.\d)* and denotes the port in the hub at each level in
+# the USB topology. For PCI devices it follows the format \d.\d(/\d.\d)*
+# denoting the device (identified by device-function pair) at each level in the
+# PCI topology.
+#
+# The 'name' key is used in the leaf devices to name the device for clarity in
+# the test output.
+#
+# For USB leaf devices, the 'interfaces' key should contain a list of the
+# interfaces in that device that should be bound to a driver.
+#
+- type: usb-controller
+  dt-mmio: 11200000
+  usb-version: 2
+  devices:
+    - path: 1.4.1
+      interfaces: [0, 1]
+      name: camera
+    - path: 1.4.2
+      interfaces: [0, 1]
+      name: bluetooth
+- type: pci-controller
+  dt-mmio: 11230000
+  devices:
+    - path: 0.0/0.0
+      name: wifi