Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...

1 files changed, 55 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
index f0784d2e86dae0..0874fc21f66fbb 100644
--- a/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
+++ b/Documentation/devicetree/bindings/usb/realtek,rts5411.yaml
@@ -21,6 +21,12 @@ properties:
 
   reg: true
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
   vdd-supply:
     description:
       phandle to the regulator that provides power to the hub.
@@ -30,6 +36,36 @@ properties:
     description:
       phandle to the peer hub on the controller.
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          1st downstream facing USB port
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          2nd downstream facing USB port
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          3rd downstream facing USB port
+
+      port@4:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          4th downstream facing USB port
+
+patternProperties:
+  '^.*@[1-4]$':
+    description: The hard wired USB devices
+    type: object
+    $ref: /schemas/usb/usb-device.yaml
+
 required:
   - peer-hub
   - compatible
@@ -50,6 +86,13 @@ examples:
             reg = <1>;
             vdd-supply = <&pp3300_hub>;
             peer-hub = <&hub_3_0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            /* USB 2.0 device on port 2 */
+            device@2 {
+                compatible = "usb123,4567";
+                reg = <2>;
+            };
         };
 
         /* 3.0 hub on port 2 */
@@ -58,5 +101,17 @@ examples:
             reg = <2>;
             vdd-supply = <&pp3300_hub>;
             peer-hub = <&hub_2_0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                /* Type-A connector on port 4 */
+                port@4 {
+                    reg = <4>;
+                    endpoint {
+                      remote-endpoint = <&usb_a0_ss>;
+                    };
+                };
+            };
         };
     };