Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...

1 files changed, 72 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/ite,it5205.yaml b/Documentation/devicetree/bindings/usb/ite,it5205.yaml
new file mode 100644
index 00000000000000..36ec4251b5f208
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ite,it5205.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ite,it5205.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT5202 Type-C USB Alternate Mode Passive MUX
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Tianping Fang <tianping.fang@mediatek.com>
+
+properties:
+  compatible:
+    const: ite,it5205
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Power supply for VCC pin (3.3V)
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  ite,ovp-enable:
+    description: Enable Over Voltage Protection functionality
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the IT5205 to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - orientation-switch
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@48 {
+          compatible = "ite,it5205";
+          reg = <0x48>;
+
+          mode-switch;
+          orientation-switch;
+
+          vcc-supply = <&mt6359_vibr_ldo_reg>;
+
+          port {
+            it5205_usbss_sbu: endpoint {
+              remote-endpoint = <&typec_controller>;
+            };
+          };
+        };
+    };
+...