Merge tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...

1 files changed, 99 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml b/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml
new file mode 100644
index 00000000000000..f3011694393d82
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/hisilicon,hi3798mv200-dwc3.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/hisilicon,hi3798mv200-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Hi3798MV200 DWC3 USB SoC controller
+
+maintainers:
+  - Yang Xiwen <forbidden405@foxmail.com>
+
+properties:
+  compatible:
+    const: hisilicon,hi3798mv200-dwc3
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  ranges: true
+
+  clocks:
+    items:
+      - description: Controller bus clock
+      - description: Controller suspend clock
+      - description: Controller reference clock
+      - description: Controller gm clock
+      - description: Controller gs clock
+      - description: Controller utmi clock
+      - description: Controller pipe clock
+
+  clock-names:
+    items:
+      - const: bus
+      - const: suspend
+      - const: ref
+      - const: gm
+      - const: gs
+      - const: utmi
+      - const: pipe
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: soft
+
+patternProperties:
+  '^usb@[0-9a-f]+$':
+    $ref: snps,dwc3.yaml#
+
+required:
+  - compatible
+  - ranges
+  - '#address-cells'
+  - '#size-cells'
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb {
+        compatible = "hisilicon,hi3798mv200-dwc3";
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        clocks = <&clk_bus>,
+                 <&clk_suspend>,
+                 <&clk_ref>,
+                 <&clk_gm>,
+                 <&clk_gs>,
+                 <&clk_utmi>,
+                 <&clk_pipe>;
+        clock-names = "bus", "suspend", "ref", "gm", "gs", "utmi", "pipe";
+        resets = <&crg 0xb0 12>;
+        reset-names = "soft";
+
+        usb@98a0000 {
+            compatible = "snps,dwc3";
+            reg = <0x98a0000 0x10000>;
+            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk_bus>,
+                     <&clk_suspend>,
+                     <&clk_ref>;
+            clock-names = "bus_early", "suspend", "ref";
+            phys = <&usb2_phy1_port2>, <&combphy0 0>;
+            phy-names = "usb2-phy", "usb3-phy";
+            maximum-speed = "super-speed";
+            dr_mode = "host";
+        };
+    };