Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure tasks are thawed exactly and only once to avoid their state
getting corrupted
* tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
freezer,sched: Do not restore saved_state of a thawed task
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Borislav Petkov:
- Make sure perf event size validation is done on every event in the
group
* tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix perf_event_validate_size()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a forgotten CPU vendor check in the AMD microcode post-loading
callback so that the callback runs only on AMD
- Make sure SEV-ES protocol negotiation happens only once and on the
BSP
* tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Check vendor in the AMD microcode callback
x86/sev: Fix kernel crash due to late update to read-only ghcb_version
|
|
Pull kvm fixes from Paolo Bonzini:
"Generic:
- Set .owner for various KVM file_operations so that files refcount
the KVM module until KVM is done executing _all_ code, including
the last few instructions of kvm_put_kvm(). And then revert the
misguided attempt to rely on "struct kvm" refcounts to pin
KVM-the-module.
ARM:
- Do not redo the mapping of vLPIs, if they have already been mapped
s390:
- Do not leave bits behind in PTEs
- Properly catch page invalidations that affect the prefix of a
nested guest
x86:
- When checking if a _running_ vCPU is "in-kernel", i.e. running at
CPL0, get the CPL directly instead of relying on
preempted_in_kernel (which is valid if and only if the vCPU was
preempted, i.e. NOT running).
- Fix a benign "return void" that was recently introduced.
Selftests:
- Makefile tweak for dependency generation
- '-Wformat' fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Update EFER software model on CR0 trap for SEV-ES
KVM: selftests: add -MP to CFLAGS
KVM: selftests: Actually print out magic token in NX hugepages skip message
KVM: x86: Remove 'return void' expression for 'void function'
Revert "KVM: Prevent module exit until all VMs are freed"
KVM: Set file_operations.owner appropriately for all such structures
KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode
KVM: arm64: GICv4: Do not perform a map to a mapped vLPI
KVM: s390/mm: Properly reset no-dat
KVM: s390: vsie: fix wrong VIR 37 when MSO is used
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU
hotplug while ftrace is active.
Thanks to Naveen N Rao.
* tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ftrace: Fix stack teardown in ftrace_no_trace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fix from Bartosz Golaszewski:
- fix an error path after a failed export in sysfs code
* tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: sysfs: Fix error handling on failed export
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.7-rc5 to resolve some reported
issues. Included in here are:
- usb gadget f_hid, and uevent fix
- xhci driver revert to resolve a much-reported issue
- typec driver fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: f_hid: fix report descriptor allocation
Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1"
usb: typec: class: fix typec_altmode_put_partner to put plugs
USB: gadget: core: adjust uevent timing on gadget unbind
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 6.7-rc4 to resolve some
reported issues. Included in here are:
- pl011 dma support fix
- sc16is7xx driver fix
- ma35d1 console index fix
- 8250 driver fixes for small issues
All of these have been in linux-next with no reported issues"
* tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART
serial: ma35d1: Validate console index before assignment
ARM: PL011: Fix DMA support
serial: sc16is7xx: address RX timeout interrupt errata
serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit
serial: 8250_omap: Add earlycon support for the AM654 UART controller
serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small fixes for 6.7-rc5 for a variety of small driver
subsystems. Included in here are:
- debugfs revert for reported issue
- greybus revert for reported issue
- greybus fixup for endian build warning
- coresight driver fixes
- nvmem driver fixes
- devcoredump fix
- parport new device id
- ndtest build fix
All of these have ben in linux-next with no reported issues"
* tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nvmem: Do not expect fixed layouts to grab a layout driver
parport: Add support for Brainboxes IX/UC/PX parallel cards
Revert "greybus: gb-beagleplay: Ensure le for values in transport"
greybus: gb-beagleplay: Ensure le for values in transport
greybus: BeaglePlay driver needs CRC_CCITT
Revert "debugfs: annotate debugfs handlers vs. removal with lockdep"
devcoredump: Send uevent once devcd is ready
ndtest: fix typo class_regster -> class_register
misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write
misc: mei: client.c: return negative error code in mei_cl_write
mei: pxp: fix mei_pxp_send_message return value
coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base
coresight: ultrasoc-smb: Config SMB buffer before register sink
coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb
Documentation: coresight: fix `make refcheckdocs` warning
hwtracing: hisi_ptt: Don't try to attach a task
hwtracing: hisi_ptt: Handle the interrupt in hardirq context
hwtracing: hisi_ptt: Add dummy callback pmu::read()
coresight: Fix crash when Perf and sysfs modes are used concurrently
coresight: etm4x: Remove bogous __exit annotation for some functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Preserve syscall nr across execve(), slightly clean up drdtime(), fix
the Clang built zboot kernel, fix a stack unwinder bug and several bpf
jit bugs"
* tag 'loongarch-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: BPF: Fix unconditional bswap instructions
LoongArch: BPF: Fix sign-extension mov instructions
LoongArch: BPF: Don't sign extend function return value
LoongArch: BPF: Don't sign extend memory load operand
LoongArch: Preserve syscall nr across execve()
LoongArch: Set unwind stack type to unknown rather than set error flag
LoongArch: Slightly clean up drdtime()
LoongArch: Apply dynamic relocations for LLD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- Fixes for broken Loongson firmware
- Fix lockdep splat
- Fix FPU states when creating kernel threads
* tag 'mips-fixes_6.7_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: kernel: Clear FPU states when setting up kernel threads
MIPS: Loongson64: Handle more memory types passed from firmware
MIPS: Loongson64: Enable DMA noncoherent support
MIPS: Loongson64: Reserve vgabios memory on boot
mips/smp: Call rcutree_report_cpu_starting() earlier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"A random set of small bug fixes including:
- Fix segfault on AmpereOne due to missing default metricgroup name
- Fix segfault on `perf list --json` due to NULL pointer"
* tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback
perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields
perf metrics: Avoid segv if default metricgroup isn't set
|
|
Pull smb client fixes from Steve French:
"Six smb3 client fixes:
- Fixes for copy_file_range and clone (cache invalidation and file
size), also addresses an xfstest failure
- Fix to return proper error if REMAP_FILE_DEDUP set (also fixes
xfstest generic/304)
- Fix potential null pointer reference with DFS
- Multichannel fix addressing (reverting an earlier patch) some of
the problems with enabling/disabling channels dynamically
Still working on a followon multichannel fix to address another issue
found in reconnect testing that will send next week"
* tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: reconnect worker should take reference on server struct unconditionally
Revert "cifs: reconnect work should have reference on server struct"
cifs: Fix non-availability of dedup breaking generic/304
smb: client: fix potential NULL deref in parse_dfs_referrals()
cifs: Fix flushing, invalidation and file size with FICLONE
cifs: Fix flushing, invalidation and file size with copy_file_range()
|
|
We can see that "bswap32: Takes an unsigned 32-bit number in either big-
or little-endian format and returns the equivalent number with the same
bit width but opposite endianness" in BPF Instruction Set Specification,
so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and
BPF_ALU64.
[root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable
[root@linux fedora]# modprobe test_bpf
Before:
test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times)
test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times)
After:
test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS
test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS
Fixes: 4ebf9216e7df ("LoongArch: BPF: Support unconditional bswap instructions")
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
We can see that "Short form of movsx, dst_reg = (s8,s16,s32)src_reg" in
include/linux/filter.h, additionally, for BPF_ALU64 the value of the
destination register is unchanged whereas for BPF_ALU the upper 32 bits
of the destination register are zeroed, so it should clear the upper 32
bits for BPF_ALU.
[root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable
[root@linux fedora]# modprobe test_bpf
Before:
test_bpf: #81 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
test_bpf: #82 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times)
After:
test_bpf: #81 ALU_MOVSX | BPF_B jited:1 6 PASS
test_bpf: #82 ALU_MOVSX | BPF_H jited:1 6 PASS
By the way, the bpf selftest case "./test_progs -t verifier_movsx" can
also be fixed with this patch.
Fixes: f48012f16150 ("LoongArch: BPF: Support sign-extension mov instructions")
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The `cls_redirect` test triggers a kernel panic like:
# ./test_progs -t cls_redirect
Can't find bpf_testmod.ko kernel module: -2
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
[ 30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c
[ 30.939331] Oops[#1]:
[ 30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6
[ 30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[ 30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0
[ 30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10
[ 30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90
[ 30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000
[ 30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000
[ 30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200
[ 30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0
[ 30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0
[ 30.941015] ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590
[ 30.941535] ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590
[ 30.941696] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 30.942224] PRMD: 00000004 (PPLV0 +PIE -PWE)
[ 30.942330] EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
[ 30.942453] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
[ 30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 30.942764] BADV: fffffffffd814de0
[ 30.942854] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
[ 30.942974] Modules linked in:
[ 30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76)
[ 30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000
[ 30.943495] 0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200
[ 30.943626] 0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668
[ 30.943785] 0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000
[ 30.943936] 900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70
[ 30.944091] 0000000000000000 0000000000000001 0000000731eeab00 0000000000000000
[ 30.944245] ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8
[ 30.944402] ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000
[ 30.944538] 000000000000005a 900000010504c200 900000010a064000 900000010a067000
[ 30.944697] 9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c
[ 30.944852] ...
[ 30.944924] Call Trace:
[ 30.945120] [<ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590
[ 30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8
[ 30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684
[ 30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724
[ 30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c
[ 30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94
[ 30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158
[ 30.946492]
[ 30.946549] Code: 0015030e 5c0009c0 5001d000 <28c00304> 02c00484 29c00304 00150009 2a42d2e4 0280200d
[ 30.946793]
[ 30.946971] ---[ end trace 0000000000000000 ]---
[ 32.093225] Kernel panic - not syncing: Fatal exception in interrupt
[ 32.093526] Kernel relocated by 0x2320000
[ 32.093630] .text @ 0x9000000002520000
[ 32.093725] .data @ 0x9000000003400000
[ 32.093792] .bss @ 0x9000000004413200
[ 34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
This is because we signed-extend function return values. When subprog
mode is enabled, we have:
cls_redirect()
-> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480
The pointer returned is later signed-extended to 0xfffffffffc00b480 at
`BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page
fault and a kernel panic.
Drop the unnecessary signed-extension on return values like other
architectures do.
With this change, we have:
# ./test_progs -t cls_redirect
Can't find bpf_testmod.ko kernel module: -2
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
#51/1 cls_redirect/cls_redirect_inlined:OK
#51/2 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
#51/3 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
#51/4 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
#51/5 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
#51/6 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
#51/7 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
#51/8 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
#51/9 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
#51/10 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
#51/11 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
#51/12 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
#51/13 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
#51/14 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
#51/15 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
#51/16 cls_redirect/cls_redirect_subprogs:OK
#51/17 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
#51/18 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
#51/19 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
#51/20 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
#51/21 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
#51/22 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
#51/23 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
#51/24 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
#51/25 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
#51/26 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
#51/27 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
#51/28 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
#51/29 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
#51/30 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
#51/31 cls_redirect/cls_redirect_dynptr:OK
#51/32 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK
#51/33 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK
#51/34 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK
#51/35 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK
#51/36 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK
#51/37 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK
#51/38 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK
#51/39 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK
#51/40 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK
#51/41 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK
#51/42 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK
#51/43 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK
#51/44 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK
#51/45 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK
#51 cls_redirect:OK
Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED
Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The `cgrp_local_storage` test triggers a kernel panic like:
# ./test_progs -t cgrp_local_storage
Can't find bpf_testmod.ko kernel module: -2
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
[ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00
[ 550.931781] Oops[#1]:
[ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6
[ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022
[ 550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0
[ 550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558
[ 550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118
[ 550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0
[ 550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020
[ 550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700
[ 550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8
[ 550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050
[ 550.933520] ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200
[ 550.933911] ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200
[ 550.934105] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[ 550.934596] PRMD: 00000004 (PPLV0 +PIE -PWE)
[ 550.934712] EUEN: 00000003 (+FPE +SXE -ASXE -BTE)
[ 550.934836] ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
[ 550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0)
[ 550.935097] BADV: 0000000000000080
[ 550.935181] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000)
[ 550.935291] Modules linked in:
[ 550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55)
[ 550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001
[ 550.935844] 9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034
[ 550.935990] 0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09
[ 550.936175] 0000000000000001 0000000000000000 9000000108353ec0 0000000000000118
[ 550.936314] 9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000
[ 550.936479] 0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288
[ 550.936635] 00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003
[ 550.936779] 9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c
[ 550.936939] 0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0
[ 550.937083] ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558
[ 550.937224] ...
[ 550.937299] Call Trace:
[ 550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200
[ 550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154
[ 550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200
[ 550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94
[ 550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158
[ 550.938477]
[ 550.938607] Code: 580009ae 50016000 262402e4 <28c20085> 14092084 03a00084 16000024 03240084 00150006
[ 550.938851]
[ 550.939021] ---[ end trace 0000000000000000 ]---
Further investigation shows that this panic is triggered by memory
load operations:
ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0,
BPF_LOCAL_STORAGE_GET_F_CREATE);
The expression `task->cgroups->dfl_cgrp` involves two memory load.
Since the field offset fits in imm12 or imm14, we use ldd or ldptrd
instructions. But both instructions have the side effect that it will
signed-extended the imm operand. Finally, we got the wrong addresses
and panics is inevitable.
Use a generic ldxd instruction to avoid this kind of issues.
With this change, we have:
# ./test_progs -t cgrp_local_storage
Can't find bpf_testmod.ko kernel module: -2
WARNING! Selftests relying on bpf_testmod.ko will be skipped.
test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
#48/1 cgrp_local_storage/tp_btf:OK
test_attach_cgroup:PASS:skel_open 0 nsec
test_attach_cgroup:PASS:prog_attach 0 nsec
test_attach_cgroup:PASS:prog_attach 0 nsec
libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22
test_attach_cgroup:FAIL:prog_attach unexpected error: -524
#48/2 cgrp_local_storage/attach_cgroup:FAIL
test_recursion:PASS:skel_open_and_load 0 nsec
libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22
libbpf: prog 'on_lookup': failed to auto-attach: -524
test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524)
#48/3 cgrp_local_storage/recursion:FAIL
#48/4 cgrp_local_storage/negative:OK
#48/5 cgrp_local_storage/cgroup_iter_sleepable:OK
test_yes_rcu_lock:PASS:skel_open 0 nsec
test_yes_rcu_lock:PASS:skel_load 0 nsec
libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22
libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524
test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524)
#48/6 cgrp_local_storage/yes_rcu_lock:FAIL
#48/7 cgrp_local_storage/no_rcu_lock:OK
#48 cgrp_local_storage:FAIL
All error logs:
test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
test_attach_cgroup:PASS:skel_open 0 nsec
test_attach_cgroup:PASS:prog_attach 0 nsec
test_attach_cgroup:PASS:prog_attach 0 nsec
libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22
test_attach_cgroup:FAIL:prog_attach unexpected error: -524
#48/2 cgrp_local_storage/attach_cgroup:FAIL
test_recursion:PASS:skel_open_and_load 0 nsec
libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22
libbpf: prog 'on_lookup': failed to auto-attach: -524
test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524)
#48/3 cgrp_local_storage/recursion:FAIL
test_yes_rcu_lock:PASS:skel_open 0 nsec
test_yes_rcu_lock:PASS:skel_load 0 nsec
libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22
libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524
test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524)
#48/6 cgrp_local_storage/yes_rcu_lock:FAIL
#48 cgrp_local_storage:FAIL
Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED
No panics any more (The test still failed because lack of BPF trampoline
which I am actively working on).
Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, we store syscall nr in pt_regs::regs[11] and syscall execve()
accidentally overrides it during its execution:
sys_execve()
-> do_execve()
-> do_execveat_common()
-> bprm_execve()
-> exec_binprm()
-> search_binary_handler()
-> load_elf_binary()
-> ELF_PLAT_INIT()
ELF_PLAT_INIT() reset regs[11] to 0, so in syscall_exit_to_user_mode()
we later get a wrong syscall nr. This breaks tools like execsnoop since
it relies on execve() tracepoints.
Skip pt_regs::regs[11] reset in ELF_PLAT_INIT() to fix the issue.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
During unwinding, unwind_done() is used as an end condition. Normally it
unwind to the user stack and then set the stack type to unknown, which
is a normal exit. When something unexpected happens in unwind process
and we cannot unwind anymore, we should set the error flag, and also set
the stack type to unknown to indicate that the unwind process can not
continue. The error flag emphasizes that the unwind process produce an
unexpected error. There is no unexpected things when we unwind the PT_REGS
in the top of IRQ stack and find out that is an user mode PT_REGS. Thus,
we should not set error flag and just set stack type to unknown.
Reported-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
As we are just discarding the stable clock ID, simply write it into
$zero instead of allocating a temporary register.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
For the following assembly code:
.text
.global func
func:
nop
.data
var:
.dword func
When linked with `-pie`, GNU LD populates the `var` variable with the
pre-relocated value of `func`. However, LLVM LLD does not exhibit the
same behavior. This issue also arises with the `kernel_entry` in arch/
loongarch/kernel/head.S:
_head:
.word MZ_MAGIC /* "MZ", MS-DOS header */
.org 0x8
.dword kernel_entry /* Kernel entry point */
The correct kernel entry from the MS-DOS header is crucial for jumping
to vmlinux from zboot. This necessity is why the compressed relocatable
kernel compiled by Clang encounters difficulties in booting.
To address this problem, it is proposed to apply dynamic relocations to
place with `--apply-dynamic-relocs`.
Link: https://github.com/ClangBuiltLinux/linux/issues/1962
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One tiny fix to the be2iscsi driver fixing a memory leak in an error
leg"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: be2iscsi: Fix a memleak in beiscsi_init_wrb_handle()
|
|
Pull block fixes from Jens Axboe:
"Nothing major in here, just miscellanous fixes for MD and NVMe:
- NVMe pull request via Keith:
- Proper nvme ctrl state setting (Keith)
- Passthrough command optimization (Keith)
- Spectre fix (Nitesh)
- Kconfig clarifications (Shin'ichiro)
- Frozen state deadlock fix (Bitao)
- Power setting quirk (Georg)
- MD pull requests via Song:
- 6.7 regresisons with recovery/sync (Yu)
- Reshape fix (David)"
* tag 'block-6.7-2023-12-08' of git://git.kernel.dk/linux:
md: split MD_RECOVERY_NEEDED out of mddev_resume
nvme-pci: Add sleep quirk for Kingston drives
md: fix stopping sync thread
md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly()
md: fix missing flush of sync_work
nvme: fix deadlock between reset and scan
nvme: prevent potential spectre v1 gadget
nvme: improve NVME_HOST_AUTH and NVME_TARGET_AUTH config descriptions
nvme-ioctl: move capable() admin check to the end
nvme: ensure reset state check ordering
nvme: introduce helper function to get ctrl state
md/raid6: use valid sector values to determine if an I/O should wait on the reshape
|
|
Pull io_uring fixes from Jens Axboe:
"Two minor fixes for issues introduced in this release cycle, and two
fixes for issues or potential issues that are heading to stable.
One of these ends up disabling passing io_uring file descriptors via
SCM_RIGHTS. There really shouldn't be an overlap between that kind of
historic use case and modern usage of io_uring, which is why this was
deemed appropriate"
* tag 'io_uring-6.7-2023-12-08' of git://git.kernel.dk/linux:
io_uring/af_unix: disable sending io_uring over sockets
io_uring/kbuf: check for buffer list readiness after NULL check
io_uring/kbuf: Fix an NULL vs IS_ERR() bug in io_alloc_pbuf_ring()
io_uring: fix mutex_unlock with unreferenced ctx
|
|
Pull rdma fixes from Jason Gunthorpe:
"Primarily rtrs and irdma fixes:
- Fix uninitialized value in ib_get_eth_speed()
- Fix hns refusing to work if userspace doesn't select the correct
congestion control algorithm
- Several irdma fixes - unreliable Send Queue Drain, use after free,
64k page size bugs, device removal races
- Several rtrs bug fixes - crashes, memory leaks, use after free, bad
credit accounting, bogus WARN_ON
- Typos and a MAINTAINER update"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Avoid free the non-cqp_request scratch
RDMA/irdma: Fix support for 64k pages
RDMA/irdma: Ensure iWarp QP queue memory is OS paged aligned
RDMA/core: Fix umem iterator when PAGE_SIZE is greater then HCA pgsz
RDMA/irdma: Fix UAF in irdma_sc_ccq_get_cqe_info()
RDMA/bnxt_re: Correct module description string
RDMA/rtrs-clt: Remove the warnings for req in_use check
RDMA/rtrs-clt: Fix the max_send_wr setting
RDMA/rtrs-srv: Destroy path files after making sure no IOs in-flight
RDMA/rtrs-srv: Free srv_mr iu only when always_invalidate is true
RDMA/rtrs-srv: Check return values while processing info request
RDMA/rtrs-clt: Start hb after path_up
RDMA/rtrs-srv: Do not unconditionally enable irq
MAINTAINERS: Add Chengchang Tang as Hisilicon RoCE maintainer
RDMA/irdma: Add wait for suspend on SQD
RDMA/irdma: Do not modify to SQD on error
RDMA/hns: Fix unnecessary err return when using invalid congest control algorithm
RDMA/core: Fix uninit-value access in ib_get_eth_speed()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix cpufreq reference counting in the DTPM (dynamic thermal and power
management) power capping framework (Lukasz Luba)"
* tag 'pm-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: DTPM: Fix missing cpufreq_cpu_put() calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a possible crash on an attempt to free unallocated memory in the
error path of acpi_evaluate_reference() that has been introduced by
one of the recent changes (Rafael Wysocki)"
* tag 'acpi-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: utils: Fix error path in acpi_evaluate_reference()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- acpi_power_meter: Fix 4.29 MW output seen if acpi reports bad data
- corsair-psu: Fix ability to probe if the driver is built into the kernel
- ltc2991: Fix spelling mistake "contiuous" -> "continuous"
- max31827: Add missing regulator header file include
- nzxt-kraken2: Fix error handling path in probe function
* tag 'hwmon-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Fix probe when built-in
hwmon: (nzxt-kraken2) Fix error handling path in kraken2_probe()
hwmon: (acpi_power_meter) Fix 4.29 MW bug
hwmon: max31827: include regulator header
hwmon: ltc2991: Fix spelling mistake "contiuous" -> "continuous"
|
|
Pull pwm fix from Uwe Kleine-König:
"This fixes a null pointer exception in the bcm2835 pwm driver.
The problem was introduced by a combination of two commits merged for
v6.7-rc1 where each change alone would have been fine.
Thanks to Florian Fainelli for noticing and fixing the issue"
* tag 'pwm/for-6.7-rc5-fixes' of https://git.pengutronix.de/git/ukl/linux:
pwm: bcm2835: Fix NPD in suspend/resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This is a typical bump in the middle of its way; we've gathered lots
of fixes (mostly for ASoC) at this time:
- PCM array out-of-bound access fix
- Correction of SOC PCM merge error
- Lots of ASoC SOF Intel updates
- A few ASoC AMD quirks
- More proper timer handling in PCM test module
- HD-audio and USB-audio quirks as usual
- Other device-specific fixes for various ASoC codecs"
* tag 'sound-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (39 commits)
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7
ALSA: pcmtest: stop timer before buffer is released
ALSA: hda/realtek: Add Framework laptop 16 to quirks
ALSA: hda/realtek: add new Framework laptop to quirks
ALSA: pcm: fix out-of-bounds in snd_pcm_state_names
ASoC: qcom: sc8280xp: Limit speaker digital volumes
ASoC: ops: add correct range check for limiting volume
ALSA: hda/realtek: Enable headset on Lenovo M90 Gen5
ALSA: hda/realtek: fix speakers on XPS 9530 (2023)
ALSA: usb-audio: Add Pioneer DJM-450 mixer controls
ASoC: wm_adsp: fix memleak in wm_adsp_buffer_populate
ASoC: da7219: Support low DC impedance headset
ASoC: amd: acp: Add support for a new Huawei Matebook laptop
ALSA: hda/realtek: Apply quirk for ASUS UM3504DA
ASoC: SOF: ipc4-topology: Correct data structures for the GAIN module
ASoC: SOF: ipc4-topology: Correct data structures for the SRC module
ASoC: hdac_hda: Conditionally register dais for HDMI and Analog
ASoC: codecs: lpass-tx-macro: set active_decimator correct default value
ASoC: amd: yc: Fix non-functional mic on ASUS E1504FA
ASoC: amd: yc: Add DMI entry to support System76 Pangolin 13
...
|
|
Pull drm fixes from Dave Airlie:
"Regular weekly fixes, mostly amdgpu and i915 as usual. A couple of
nouveau, panfrost, one core and one bridge Kconfig.
Seems about normal for rc5.
atomic-helpers:
- invoke end_fb_access while owning plane state
i915:
- fix a missing dep for a previous fix
- Relax BXT/GLK DSI transcoder hblank limits
- Fix DP MST .mode_valid_ctx() return values
- Reject DP MST modes that require bigjoiner (as it's not yet
supported on DP MST)
- Fix _intel_dsb_commit() variable type to allow negative values
nouveau:
- document some bits of gsp rm
- flush vmm more on tu102 to avoid hangs
panfrost:
- fix imported dma-buf objects residency
- fix device freq update
bridge:
- tc358768 - fix Kconfig
amdgpu:
- Disable MCBP on gfx9
- DC vbios fix
- eDP fix
- dml2 UBSAN fix
- SMU 14 fix
- RAS fixes
- dml KASAN/KCSAN fix
- PSP 13 fix
- Clockgating fixes
- Suspend fix
exynos:
- fix pointer dereference
- fix wrong error check"
* tag 'drm-fixes-2023-12-08' of git://anongit.freedesktop.org/drm/drm: (27 commits)
drm/exynos: fix a wrong error checking
drm/exynos: fix a potential error pointer dereference
drm/amdgpu: fix buffer funcs setting order on suspend
drm/amdgpu: Avoid querying DRM MGCG status
drm/amdgpu: Update HDP 4.4.2 clock gating flags
drm/amdgpu: Add NULL checks for function pointers
drm/amdgpu: Restrict extended wait to PSP v13.0.6
drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml
drm/amdgpu: optimize the printing order of error data
drm/amdgpu: Update fw version for boot time error query
drm/amd/pm: support new mca smu error code decoding
drm/amd/swsmu: update smu v14_0_0 driver if version and metrics table
drm/amd/display: Fix array-index-out-of-bounds in dml2
drm/amd/display: Add monitor patch for specific eDP
drm/amd/display: Use channel_width = 2 for vram table 3.0
drm/amdgpu: disable MCBP by default
drm/atomic-helpers: Invoke end_fb_access while owning plane state
drm/i915: correct the input parameter on _intel_dsb_commit()
drm/i915/mst: Reject modes that require the bigjoiner
drm/i915/mst: Fix .mode_valid_ctx() return values
...
|
|
In general, activating long mode involves setting the EFER_LME bit in
the EFER register and then enabling the X86_CR0_PG bit in the CR0
register. At this point, the EFER_LMA bit will be set automatically by
hardware.
In the case of SVM/SEV guests where writes to CR0 are intercepted, it's
necessary for the host to set EFER_LMA on behalf of the guest since
hardware does not see the actual CR0 write.
In the case of SEV-ES guests where writes to CR0 are trapped instead of
intercepted, the hardware *does* see/record the write to CR0 before
exiting and passing the value on to the host, so as part of enabling
SEV-ES support commit f1c6366e3043 ("KVM: SVM: Add required changes to
support intercepts under SEV-ES") dropped special handling of the
EFER_LMA bit with the understanding that it would be set automatically.
However, since the guest never explicitly sets the EFER_LMA bit, the
host never becomes aware that it has been set. This becomes problematic
when userspace tries to get/set the EFER values via
KVM_GET_SREGS/KVM_SET_SREGS, since the EFER contents tracked by the host
will be missing the EFER_LMA bit, and when userspace attempts to pass
the EFER value back via KVM_SET_SREGS it will fail a sanity check that
asserts that EFER_LMA should always be set when X86_CR0_PG and EFER_LME
are set.
Fix this by always inferring the value of EFER_LMA based on X86_CR0_PG
and EFER_LME, regardless of whether or not SEV-ES is enabled.
Fixes: f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES")
Reported-by: Peter Gonda <pgonda@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210507165947.2502412-2-seanjc@google.com>
[A two year old patch that was revived after we noticed the failure in
KVM_SET_SREGS and a similar patch was posted by Michael Roth. This is
Sean's patch, but with Michael's more complete commit message. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It seems that when the driver is built-in, the HID bus is
initialized after the driver is loaded, which whould cause
module_hid_driver() to fail.
Fix this by registering the driver after the HID bus using
late_initcall() in accordance with other hwmon HID drivers.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231207210723.222552-1-W_Armin@gmx.de
[groeck: Dropped "compile tested" comment; the patch has been tested
but the tester did not provide a Tested-by: tag]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Using -MD without -MP causes build failures when a header file is deleted
or moved. With -MP, the compiler will emit phony targets for the header
files it lists as dependencies, and the Makefiles won't refuse to attempt
to rebuild a C unit which no longer includes the deleted header.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/9fc8b5395321abbfcaf5d78477a9a7cd350b08e4.camel@infradead.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pass MAGIC_TOKEN to __TEST_REQUIRE() when printing the help message about
needing to pass a magic value to manually run the NX hugepages test,
otherwise the help message will contain garbage.
In file included from x86_64/nx_huge_pages_test.c:15:
x86_64/nx_huge_pages_test.c: In function ‘main’:
include/test_util.h:40:32: error: format ‘%d’ expects a matching ‘int’ argument [-Werror=format=]
40 | ksft_exit_skip("- " fmt "\n", ##__VA_ARGS__); \
| ^~~~
x86_64/nx_huge_pages_test.c:259:9: note: in expansion of macro ‘__TEST_REQUIRE’
259 | __TEST_REQUIRE(token == MAGIC_TOKEN,
| ^~~~~~~~~~~~~~
Signed-off-by: angquan yu <angquan21@gmail.com>
Link: https://lore.kernel.org/r/20231128221105.63093-1-angquan21@gmail.com
[sean: rewrite shortlog+changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm-master
KVM fixes for 6.7-rcN:
- When checking if a _running_ vCPU is "in-kernel", i.e. running at CPL0,
get the CPL directly instead of relying on preempted_in_kernel, which
is valid if and only if the vCPU was preempted, i.e. NOT running.
- Set .owner for various KVM file_operations so that files refcount the
KVM module until KVM is done executing _all_ code, including the last
few instructions of kvm_put_kvm(). And then revert the misguided
attempt to rely on "struct kvm" refcounts to pin KVM-the-module.
- Fix a benign "return void" that was recently introduced.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master
Two small but important bugfixes.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 6.7, take #1
- Avoid mapping vLPIs that have already been mapped
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of fixes to the new module load-time relocation code
- A fix for hwprobe overflowing on rv32
- A fix for to correctly decode C.SWSP and C.SDSP, which manifests in
misaligned access handling
- A fix for a boot-time shadow call stack initialization ordering issue
- A fix for Andes' errata probing, which was calling
riscv_noncoherent_supported() too late in the boot process and
triggering an oops
* tag 'riscv-for-linus-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: errata: andes: Probe for IOCP only once in boot stage
riscv: Fix SMP when shadow call stacks are enabled
dt-bindings: perf: riscv,pmu: drop unneeded quotes
riscv: fix misaligned access handling of C.SWSP and C.SDSP
RISC-V: hwprobe: Always use u64 for extension bits
Support rv32 ULEB128 test
riscv: Correct type casting in module loading
riscv: Safely remove entries from relocation list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes are devicetree fixes for NXP, Mediatek, Rockchips
Arm machines as well as Microchip RISC-V, and most of these address
build-time warnings for spec violations and other minor issues. One of
the Mediatek warnings was enabled by default and prevented a clean
build.
The ones that address serious runtime issues are all on the i.MX
platform:
- a boot time panic on imx8qm
- USB hanging under load on imx8
- regressions on the imx93 ethernet phy
Code fixes include a minor error handling for the i.MX PMU driver, and
a number of firmware driver fixes:
- OP-TEE fix for supplicant based device enumeration, and a new sysfs
attribute to needed to fix a race against userspace
- Arm SCMI fix for possible truncation/overflow in the frequency
computations
- Multiple FF-A fixes for the newly added notification support"
* tag 'soc-fixes-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (55 commits)
MAINTAINERS: change the S32G2 maintainer's email address.
arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
ARM: dts: imx28-xea: Pass the 'model' property
ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8-apalis: set wifi regulator to always-on
ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
arm64: dts: imx8ulp: update gpio node name to align with register address
arm64: dts: imx93: update gpio node name to align with register address
arm64: dts: imx93: correct mediamix power
arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode
firmware: arm_scmi: Fix frequency truncation by promoting multiplier type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Snapshot buffer issues:
1. When instances started allowing latency tracers, it uses a
snapshot buffer (another buffer that is not written to but swapped
with the main buffer that is). The snapshot buffer needs to be the
same size as the main buffer. But when the snapshot buffers were
added to instances, the code to make the snapshot equal to the
main buffer still was only doing it for the main buffer and not
the instances.
2. Need to stop the current tracer when resizing the buffers.
Otherwise there can be a race if the tracer decides to make a
snapshot between resizing the main buffer and the snapshot buffer.
3. When a tracer is "stopped" in disables both the main buffer and
the snapshot buffer. This needs to be done for instances and not
only the main buffer, now that instances also have a snapshot
buffer.
- Buffered event for filtering issues:
When filtering is enabled, because events can be dropped often, it is
quicker to copy the event into a temp buffer and write that into the
main buffer if it is not filtered or just drop the event if it is,
than to write the event into the ring buffer and then try to discard
it. This temp buffer is allocated and needs special synchronization
to do so. But there were some issues with that:
1. When disabling the filter and freeing the buffer, a call to all
CPUs is required to stop each per_cpu usage. But the code called
smp_call_function_many() which does not include the current CPU.
If the task is migrated to another CPU when it enables the CPUs
via smp_call_function_many(), it will not enable the one it is
currently on and this causes issues later on. Use
on_each_cpu_mask() instead, which includes the current CPU.
2.When the allocation of the buffered event fails, it can give a
warning. But the buffered event is just an optimization (it's
still OK to write to the ring buffer and free it). Do not WARN in
this case.
3.The freeing of the buffer event requires synchronization. First a
counter is decremented to zero so that no new uses of it will
happen. Then it sets the buffered event to NULL, and finally it
frees the buffered event. There's a synchronize_rcu() between the
counter decrement and the setting the variable to NULL, but only a
smp_wmb() between that and the freeing of the buffer. It is
theoretically possible that a user missed seeing the decrement,
but will use the buffer after it is free. Another
synchronize_rcu() is needed in place of that smp_wmb().
- ring buffer timestamps on 32 bit machines
The ring buffer timestamp on 32 bit machines has to break the 64 bit
number into multiple values as cmpxchg is required on it, and a 64
bit cmpxchg on 32 bit architectures is very slow. The code use to
just use two 32 bit values and make it a 60 bit timestamp where the
other 4 bits were used as counters for synchronization. It later came
known that the timestamp on 32 bit still need all 64 bits in some
cases. So 3 words were created to handle the 64 bits. But issues
arised with this:
1. The synchronization logic still only compared the counter with
the first two, but not with the third number, so the
synchronization could fail unknowingly.
2. A check on discard of an event could race if an event happened
between the discard and updating one of the counters. The counter
needs to be updated (forcing an absolute timestamp and not to use
a delta) before the actual discard happens.
* tag 'trace-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Test last update in 32bit version of __rb_time_read()
ring-buffer: Force absolute timestamp on discard of event
tracing: Fix a possible race when disabling buffered events
tracing: Fix a warning when allocating buffered events fails
tracing: Fix incomplete locking when disabling buffered events
tracing: Disable snapshot buffer when stopping instance tracers
tracing: Stop current tracer when resizing buffer
tracing: Always update snapshot buffer size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"31 hotfixes. Ten of these address pre-6.6 issues and are marked
cc:stable. The remainder address post-6.6 issues or aren't considered
serious enough to justify backporting"
* tag 'mm-hotfixes-stable-2023-12-07-18-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()
nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()
mm/hugetlb: have CONFIG_HUGETLB_PAGE select CONFIG_XARRAY_MULTI
scripts/gdb: fix lx-device-list-bus and lx-device-list-class
MAINTAINERS: drop Antti Palosaari
highmem: fix a memory copy problem in memcpy_from_folio
nilfs2: fix missing error check for sb_set_blocksize call
kernel/Kconfig.kexec: drop select of KEXEC for CRASH_DUMP
units: add missing header
drivers/base/cpu: crash data showing should depends on KEXEC_CORE
mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions
scripts/gdb/tasks: fix lx-ps command error
mm/Kconfig: make userfaultfd a menuconfig
selftests/mm: prevent duplicate runs caused by TEST_GEN_PROGS
mm/damon/core: copy nr_accesses when splitting region
lib/group_cpus.c: avoid acquiring cpu hotplug lock in group_cpus_evenly
checkstack: fix printed address
mm/memory_hotplug: fix error handling in add_memory_resource()
mm/memory_hotplug: add missing mem_hotplug_lock
.mailmap: add a new address mapping for Chester Lin
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
Devicetree fixes for the 6.7-cycle.
All over the place this time. From adapting the size of the vdec nodes
on rk3328 and rk3399, fixing some wrong pinctrl settings on rk3128 and
the Turing RK1 board, emmc-settings fixes on rk3588 and interrupt-name
mishaps, down to some dt-cleanups.
Also this adds the missing rockchip,rk3588-pmugrf compatible to the soc
grf binding, that I somehow messed up during the pull requests for the
-rc1 . At least with it included the dt-checker is happier.
* tag 'v6.7-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588
arm64: dts: rockchip: Fix PCI node addresses on rk3399-gru
arm64: dts: rockchip: drop interrupt-names property from rk3588s dfi
arm64: dts: rockchip: Fix Turing RK1 interrupt pinctrls
ARM: dts: rockchip: Fix sdmmc_pwren's pinmux setting for RK3128
arm64: dts: rockchip: minor whitespace cleanup around '='
ARM: dts: rockchip: minor whitespace cleanup around '='
dt-bindings: soc: rockchip: grf: add rockchip,rk3588-pmugrf
arm64: dts: rockchip: fix rk356x pcie msg interrupt name
arm64: dts: rockchip: Expand reg size of vdec node for RK3399
arm64: dts: rockchip: Expand reg size of vdec node for RK3328
Link: https://lore.kernel.org/r/2709704.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Two fixups
- Fix a potential error pointer dereference by checking the return value
of exynos_drm_crtc_get_by_type() function before accessing to crtc
object.
- Fix a wrong error checking in exynos_drm_dma.c modules, which was reported
by Dan[1]
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231207042223.2473706-1-inki.dae@samsung.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.7-2023-12-06:
amdgpu:
- Disable MCBP on gfx9
- DC vbios fix
- eDP fix
- dml2 UBSAN fix
- SMU 14 fix
- RAS fixes
- dml KASAN/KCSAN fix
- PSP 13 fix
- Clockgating fixes
- Suspend fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231206221102.4995-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.7-rc5:
- Document nouveau's GSP-RM.
- Flush vmm harder on nouveau tu102.
- Panfrost fix for imported dma-buf objects, and device frequency.
- Kconfig Build fix for tc358768.
- Call end_fb_access after atomic commit.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/05a26dc0-8cf1-4b1f-abb6-3bf471fbfc99@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf and netfilter.
Current release - regressions:
- veth: fix packet segmentation in veth_convert_skb_to_xdp_buff
Current release - new code bugs:
- tcp: assorted fixes to the new Auth Option support
Older releases - regressions:
- tcp: fix mid stream window clamp
- tls: fix incorrect splice handling
- ipv4: ip_gre: handle skb_pull() failure in ipgre_xmit()
- dsa: mv88e6xxx: restore USXGMII support for 6393X
- arcnet: restore support for multiple Sohard Arcnet cards
Older releases - always broken:
- tcp: do not accept ACK of bytes we never sent
- require admin privileges to receive packet traces via netlink
- packet: move reference count in packet_sock to atomic_long_t
- bpf:
- fix incorrect branch offset comparison with cpu=v4
- fix prog_array_map_poke_run map poke update
- netfilter:
- three fixes for crashes on bad admin commands
- xt_owner: fix race accessing sk->sk_socket, TOCTOU null-deref
- nf_tables: fix 'exist' matching on bigendian arches
- leds: netdev: fix RTNL handling to prevent potential deadlock
- eth: tg3: prevent races in error/reset handling
- eth: r8169: fix rtl8125b PAUSE storm when suspended
- eth: r8152: improve reset and surprise removal handling
- eth: hns: fix race between changing features and sending
- eth: nfp: fix sleep in atomic for bonding offload"
* tag 'net-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
vsock/virtio: fix "comparison of distinct pointer types lacks a cast" warning
net/smc: fix missing byte order conversion in CLC handshake
net: dsa: microchip: provide a list of valid protocols for xmit handler
drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group
psample: Require 'CAP_NET_ADMIN' when joining "packets" group
bpf: sockmap, updating the sg structure should also update curr
net: tls, update curr on splice as well
nfp: flower: fix for take a mutex lock in soft irq context and rcu lock
net: dsa: mv88e6xxx: Restore USXGMII support for 6393X
tcp: do not accept ACK of bytes we never sent
selftests/bpf: Add test for early update in prog_array_map_poke_run
bpf: Fix prog_array_map_poke_run map poke update
netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
netfilter: nf_tables: validate family when identifying table via handle
netfilter: nf_tables: bail out on mismatching dynset and set expressions
netfilter: nf_tables: fix 'exist' matching on bigendian arches
netfilter: nft_set_pipapo: skip inactive elements during set walk
netfilter: bpf: fix bad registration on nf_defrag
leds: trigger: netdev: fix RTNL handling to prevent potential deadlock
octeontx2-af: Update Tx link register range
...
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v6.7-rc5:
- d21a3962d304 ("drm/i915: Call intel_pre_plane_updates() also for pipes
getting enabled") in the previous fixes pull depends on a change that
wasn't included. Pick it up.
- Relax BXT/GLK DSI transcoder hblank limits
- Fix DP MST .mode_valid_ctx() return values
- Reject DP MST modes that require bigjoiner (as it's not yet supported on DP MST)
- Fix _intel_dsb_commit() variable type to allow negative values
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87msum1hv8.fsf@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Just one fix.
Commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
changed how freezing state is recorded which made cgroup_freezing()
disagree with the actual state of the task while thawing triggering a
warning. Fix it by updating cgroup_freezing()"
* tag 'cgroup-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup_freezer: cgroup_freezing: Check if not frozen
|
|
If a pointer to an uninitialized struct acpi_handle_list is passed to
acpi_evaluate_reference() and it decides to bail out early, either
because acpi_evaluate_object() fails, or because it produces invalid
data, the handles pointer from the struct acpi_handle_list will be
passed to kfree() and if it is not NULL, the kernel will crash on an
attempt to free unallocated memory.
Address this by moving the "end" label in acpi_evaluate_reference() to
the end of the function, which is sufficient, because no cleanup is
needed in that case.
Fixes: 2e57d10a6591 ("ACPI: utils: Dynamically determine acpi_handle_list size")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
"Just one patch to fix a bug which can crash the kernel if the
housekeeping and wq_unbound_cpu cpumask configuration combination
leaves the latter empty"
* tag 'wq-for-6.7-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Make sure that wq_unbound_cpumask is never empty
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"An incremental fix for the fix introduced during the merge window for
caching of the selector for windowed register ranges. We were
incorrectly leaking an error code in the case where the last selector
accessed was for some reason not cached"
* tag 'regmap-fix-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix bogus error on regcache_sync success
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix dt-extract-compatibles for builds with in tree build directory
- Drop Xinlei Lee <xinlei.lee@mediatek.com> bouncing email
- Fix the of_reconfig_get_state_change() return value documentation
- Add missing #power-domain-cells property to QCom MPM
- Fix warnings in i.MX LCDIF and adi,adv7533
* tag 'devicetree-fixes-for-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: adi,adv75xx: Document #sound-dai-cells
dt-bindings: lcdif: Properly describe the i.MX23 interrupts
dt-bindings: interrupt-controller: Allow #power-domain-cells
of: dynamic: Fix of_reconfig_get_state_change() return value documentation
dt-bindings: display: mediatek: dsi: remove Xinlei's mail
dt: dt-extract-compatibles: Don't follow symlinks when walking tree
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- Fix i8042 filter resource handling, input, and suspend issues in
asus-wmi
- Skip zero instance WMI blocks to avoid issues with some laptops
- Differentiate dev/production keys in mlxbf-bootctl
- Correct surface serdev related return value to avoid leaking errno
into userspace
- Error checking fixes
* tag 'platform-drivers-x86-v6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/mellanox: Check devm_hwmon_device_register_with_groups() return value
platform/mellanox: Add null pointer checks for devm_kasprintf()
mlxbf-bootctl: correctly identify secure boot with development keys
platform/x86: wmi: Skip blocks with zero instances
platform/surface: aggregator: fix recv_buf() return value
platform/x86: asus-wmi: disable USB0 hub on ROG Ally before suspend
platform/x86: asus-wmi: Filter Volume key presses if also reported via atkbd
platform/x86: asus-wmi: Change q500a_i8042_filter() into a generic i8042-filter
platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 int80 fixes from Dave Hansen:
"Avoid VMM misuse of 'int 0x80' handling in TDX and SEV guests.
It also has the very nice side effect of getting rid of a bunch of
assembly entry code"
* tag 'x86-int80-20231207' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tdx: Allow 32-bit emulation by default
x86/entry: Do not allow external 0x80 interrupts
x86/entry: Convert INT 0x80 emulation to IDTENTRY
x86/coco: Disable 32-bit emulation by default on TDX and SEV
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.7
Pull MD fix from Song:
"This change from Yu Kuai fixes a bug reported in
https://bugzilla.kernel.org/show_bug.cgi?id=218200"
* tag 'md-fixes-20231207-1' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: split MD_RECOVERY_NEEDED out of mddev_resume
|
|
Lenovo Yoga Pro 7 14APH8 (PCI SSID 17aa:3882) seems requiring the
similar workaround like Yoga 9 model for the bass speaker.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAGGk=CRRQ1L9p771HsXTN_ebZP41Qj+3gw35Gezurn+nokRewg@mail.gmail.com
Link: https://lore.kernel.org/r/20231207182035.30248-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
New mddev_resume() calls are added to synchronize IO with array
reconfiguration, however, this introduces a performance regression while
adding it in md_start_sync():
1) someone sets MD_RECOVERY_NEEDED first;
2) daemon thread grabs reconfig_mutex, then clears MD_RECOVERY_NEEDED and
queues a new sync work;
3) daemon thread releases reconfig_mutex;
4) in md_start_sync
a) check that there are spares that can be added/removed, then suspend
the array;
b) remove_and_add_spares may not be called, or called without really
add/remove spares;
c) resume the array, then set MD_RECOVERY_NEEDED again!
Loop between 2 - 4, then mddev_suspend() will be called quite often, for
consequence, normal IO will be quite slow.
Fix this problem by don't set MD_RECOVERY_NEEDED again in md_start_sync(),
hence the loop will be broken.
Fixes: bc08041b32ab ("md: suspend array in md_start_sync() if array need reconfiguration")
Suggested-by: Song Liu <song@kernel.org>
Reported-by: Janpieter Sollie <janpieter.sollie@edpnet.be>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218200
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231207020724.2797445-1-yukuai1@huaweicloud.com
|
|
After backporting commit 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY
flag support") in CentOS Stream 9, CI reported the following error:
In file included from ./include/linux/kernel.h:17,
from ./include/linux/list.h:9,
from ./include/linux/preempt.h:11,
from ./include/linux/spinlock.h:56,
from net/vmw_vsock/virtio_transport_common.c:9:
net/vmw_vsock/virtio_transport_common.c: In function ‘virtio_transport_can_zcopy‘:
./include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
20 | (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
| ^~
./include/linux/minmax.h:26:18: note: in expansion of macro ‘__typecheck‘
26 | (__typecheck(x, y) && __no_side_effects(x, y))
| ^~~~~~~~~~~
./include/linux/minmax.h:36:31: note: in expansion of macro ‘__safe_cmp‘
36 | __builtin_choose_expr(__safe_cmp(x, y), \
| ^~~~~~~~~~
./include/linux/minmax.h:45:25: note: in expansion of macro ‘__careful_cmp‘
45 | #define min(x, y) __careful_cmp(x, y, <)
| ^~~~~~~~~~~~~
net/vmw_vsock/virtio_transport_common.c:63:37: note: in expansion of macro ‘min‘
63 | int pages_to_send = min(pages_in_iov, MAX_SKB_FRAGS);
We could solve it by using min_t(), but this operation seems entirely
unnecessary, because we also pass MAX_SKB_FRAGS to iov_iter_npages(),
which performs almost the same check, returning at most MAX_SKB_FRAGS
elements. So, let's eliminate this unnecessary comparison.
Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support")
Cc: avkrasnov@salutedevices.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Link: https://lore.kernel.org/r/20231206164143.281107-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The byte order conversions of ISM GID and DMB token are missing in
process of CLC accept and confirm. So fix it.
Fixes: 3d9725a6a133 ("net/smc: common routine for CLC accept and confirm")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/1701882157-87956-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Provide a list of valid protocols for which the driver will provide
it's deferred xmit handler.
When using DSA_TAG_PROTO_KSZ8795 protocol, it does not provide a
"connect" method, therefor ksz_connect() is not allocating ksz_tagger_data.
This avoids the following null pointer dereference:
ksz_connect_tag_protocol from dsa_register_switch+0x9ac/0xee0
dsa_register_switch from ksz_switch_register+0x65c/0x828
ksz_switch_register from ksz_spi_probe+0x11c/0x168
ksz_spi_probe from spi_probe+0x84/0xa8
spi_probe from really_probe+0xc8/0x2d8
Fixes: ab32f56a4100 ("net: dsa: microchip: ptp: add packet transmission timestamping")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231206071655.1626479-1-sean@geanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ido Schimmel says:
====================
Generic netlink multicast fixes
Restrict two generic netlink multicast groups - in the "psample" and
"NET_DM" families - to be root-only with the appropriate capabilities.
See individual patches for more details.
====================
Link: https://lore.kernel.org/r/20231206213102.1824398-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.
Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.
Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.
A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.
Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.
Tested using [1].
Before:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
After:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
Failed to join "events" multicast group
[1]
$ cat dm.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>
int main(int argc, char **argv)
{
struct nl_sock *sk;
int grp, err;
sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}
err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}
grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
if (grp < 0) {
fprintf(stderr,
"Failed to resolve \"events\" multicast group\n");
return grp;
}
err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"events\" multicast group\n");
return err;
}
return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c
Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "psample" generic netlink family notifies sampled packets over the
"packets" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.
Fix by marking the group with the 'GENL_UNS_ADMIN_PERM' flag. This will
prevent non-root users or root without the 'CAP_NET_ADMIN' capability
(in the user namespace owning the network namespace) from joining the
group.
Tested using [1].
Before:
# capsh -- -c ./psample_repo
# capsh --drop=cap_net_admin -- -c ./psample_repo
After:
# capsh -- -c ./psample_repo
# capsh --drop=cap_net_admin -- -c ./psample_repo
Failed to join "packets" multicast group
[1]
$ cat psample.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>
int join_grp(struct nl_sock *sk, const char *grp_name)
{
int grp, err;
grp = genl_ctrl_resolve_grp(sk, "psample", grp_name);
if (grp < 0) {
fprintf(stderr, "Failed to resolve \"%s\" multicast group\n",
grp_name);
return grp;
}
err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"%s\" multicast group\n",
grp_name);
return err;
}
return 0;
}
int main(int argc, char **argv)
{
struct nl_sock *sk;
int err;
sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}
err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}
err = join_grp(sk, "config");
if (err)
return err;
err = join_grp(sk, "packets");
if (err)
return err;
return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o psample_repo psample.c
Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
John Fastabend says:
====================
Couple fixes for TLS and BPF interactions.
====================
Link: https://lore.kernel.org/r/20231206232706.374377-1-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Curr pointer should be updated when the sg structure is shifted.
Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231206232706.374377-3-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The curr pointer must also be updated on the splice similar to how
we do this for other copy types.
Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Reported-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20231206232706.374377-2-john.fastabend@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
32-bit emulation was disabled on TDX to prevent a possible attack by
a VMM injecting an interrupt on vector 0x80.
Now that int80_emulation() has a check for external interrupts the
limitation can be lifted.
To distinguish software interrupts from external ones, int80_emulation()
checks the APIC ISR bit relevant to the 0x80 vector. For
software interrupts, this bit will be 0.
On TDX, the VAPIC state (including ISR) is protected and cannot be
manipulated by the VMM. The ISR bit is set by the microcode flow during
the handling of posted interrupts.
[ dhansen: more changelog tweaks ]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
|
|
The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The
kernel expects to receive a software interrupt as a result of the INT
0x80 instruction. However, an external interrupt on the same vector
also triggers the same codepath.
An external interrupt on vector 0x80 will currently be interpreted as a
32-bit system call, and assuming that it was a user context.
Panic on external interrupts on the vector.
To distinguish software interrupts from external ones, the kernel checks
the APIC ISR bit relevant to the 0x80 vector. For software interrupts,
this bit will be 0.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
|
|
There is no real reason to have a separate ASM entry point implementation
for the legacy INT 0x80 syscall emulation on 64-bit.
IDTENTRY provides all the functionality needed with the only difference
that it does not:
- save the syscall number (AX) into pt_regs::orig_ax
- set pt_regs::ax to -ENOSYS
Both can be done safely in the C code of an IDTENTRY before invoking any of
the syscall related functions which depend on this convention.
Aside of ASM code reduction this prepares for detecting and handling a
local APIC injected vector 0x80.
[ kirill.shutemov: More verbose comments ]
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+
|
|
The INT 0x80 instruction is used for 32-bit x86 Linux syscalls. The
kernel expects to receive a software interrupt as a result of the INT
0x80 instruction. However, an external interrupt on the same vector
triggers the same handler.
The kernel interprets an external interrupt on vector 0x80 as a 32-bit
system call that came from userspace.
A VMM can inject external interrupts on any arbitrary vector at any
time. This remains true even for TDX and SEV guests where the VMM is
untrusted.
Put together, this allows an untrusted VMM to trigger int80 syscall
handling at any given point. The content of the guest register file at
that moment defines what syscall is triggered and its arguments. It
opens the guest OS to manipulation from the VMM side.
Disable 32-bit emulation by default for TDX and SEV. User can override
it with the ia32_emulation=y command line option.
[ dhansen: reword the changelog ]
Reported-by: Supraja Sridhara <supraja.sridhara@inf.ethz.ch>
Reported-by: Benedict Schlüter <benedict.schlueter@inf.ethz.ch>
Reported-by: Mark Kuhne <mark.kuhne@inf.ethz.ch>
Reported-by: Andrin Bertschi <andrin.bertschi@inf.ethz.ch>
Reported-by: Shweta Shinde <shweta.shinde@inf.ethz.ch>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org> # v6.0+: 1da5c9b x86: Introduce ia32_enabled()
Cc: <stable@vger.kernel.org> # v6.0+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Incorrect nf_defrag registration for bpf link infra, from D. Wythe.
2) Skip inactive elements in pipapo set backend walk to avoid double
deactivation, from Florian Westphal.
3) Fix NFT_*_F_PRESENT check with big endian arch, also from Florian.
4) Bail out if number of expressions in NFTA_DYNSET_EXPRESSIONS mismatch
stateful expressions in set declaration.
5) Honor family in table lookup by handle. Broken since 4.16.
6) Use sk_callback_lock to protect access to sk->sk_socket in xt_owner.
sock_orphan() might zap this pointer, from Phil Sutter.
All of these fixes address broken stuff for several releases.
* tag 'nf-23-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: xt_owner: Fix for unsafe access of sk->sk_socket
netfilter: nf_tables: validate family when identifying table via handle
netfilter: nf_tables: bail out on mismatching dynset and set expressions
netfilter: nf_tables: fix 'exist' matching on bigendian arches
netfilter: nft_set_pipapo: skip inactive elements during set walk
netfilter: bpf: fix bad registration on nf_defrag
====================
Link: https://lore.kernel.org/r/20231206180357.959930-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
File reference cycles have caused lots of problems for io_uring
in the past, and it still doesn't work exactly right and races with
unix_stream_read_generic(). The safest fix would be to completely
disallow sending io_uring files via sockets via SCM_RIGHT, so there
are no possible cycles invloving registered files and thus rendering
SCM accounting on the io_uring side unnecessary.
Cc: <stable@vger.kernel.org>
Fixes: 0091bfc81741b ("io_uring/af_unix: defer registered files gc to io_uring release")
Reported-and-suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c716c88321939156909cfa1bd8b0faaf1c804103.1701868795.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-12-06
We've added 4 non-merge commits during the last 6 day(s) which contain
a total of 7 files changed, 185 insertions(+), 55 deletions(-).
The main changes are:
1) Fix race found by syzkaller on prog_array_map_poke_run when
a BPF program's kallsym symbols were still missing, from Jiri Olsa.
2) Fix BPF verifier's branch offset comparison for BPF_JMP32 | BPF_JA,
from Yonghong Song.
3) Fix xsk's poll handling to only set mask on bound xsk sockets,
from Yewon Choi.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for early update in prog_array_map_poke_run
bpf: Fix prog_array_map_poke_run map poke update
xsk: Skip polling event check for unbound socket
bpf: Fix a verifier bug due to incorrect branch offset comparison with cpu=v4
====================
Link: https://lore.kernel.org/r/20231206220528.12093-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.7
- Proper nvme ctrl state setting (Keith)
- Passthrough command optimization (Keith)
- Spectre fix (Nitesh)
- Kconfig clarifications (Shin'ichiro)
- Frozen state deadlock fix (Bitao)
- Power setting quirk (Georg)"
* tag 'nvme-6.7-2023-12-7' of git://git.infradead.org/nvme:
nvme-pci: Add sleep quirk for Kingston drives
nvme: fix deadlock between reset and scan
nvme: prevent potential spectre v1 gadget
nvme: improve NVME_HOST_AUTH and NVME_TARGET_AUTH config descriptions
nvme-ioctl: move capable() admin check to the end
nvme: ensure reset state check ordering
nvme: introduce helper function to get ctrl state
|
|
Some Kingston NV1 and A2000 are wasting a lot of power on specific TUXEDO
platforms in s2idle sleep if 'Simple Suspend' is used.
This patch applies a new quirk 'Force No Simple Suspend' to achieve a
low power sleep without 'Simple Suspend'.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.7:
- A MAINTAINERS update to reinstate freescale ARM64 DT directory in i.MX
entry.
- A series from Alexander Stein to fix #pwm-cells for imx8-ss.
- A series from Haibo Chen to fix GPIO node name for i.MX93 and
i.MX8ULP.
- Add parkmode-disable-ss-quirk for DWC3 on i.MX8MP and i.MX8MQ to fix
an issue that the controller may hang when processing transactions
under heavy USB traffic from multiple endpoints.
- Fix mediamix block power on/off for i.MX93 by correcting the power
domain clock to be 'nic_media'.
- A couple of Ethernet PHY clock regression fixes for imx6ul-pico and
imx6q-skov board.
- Fix edma3 power domain for i.MX8QM to fix a panic during startup
process.
* tag 'imx-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx28-xea: Pass the 'model' property
ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
arm64: dts: imx8-apalis: set wifi regulator to always-on
ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
arm64: dts: imx8ulp: update gpio node name to align with register address
arm64: dts: imx93: update gpio node name to align with register address
arm64: dts: imx93: correct mediamix power
arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
ARM: dts: imx6q: skov: fix ethernet clock regression
arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config
Link: https://lore.kernel.org/r/20231207005202.GF270430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The neighbour event callback call the function nfp_tun_write_neigh,
this function will take a mutex lock and it is in soft irq context,
change the work queue to process the neighbour event.
Move the nfp_tun_write_neigh function out of range rcu_read_lock/unlock()
in function nfp_tunnel_request_route_v4 and nfp_tunnel_request_route_v6.
Fixes: abc210952af7 ("nfp: flower: tunnel neigh support bond offload")
CC: stable@vger.kernel.org # 6.2+
Signed-off-by: Hui Zhou <hui.zhou@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Stop timer in the 'trigger' and 'sync_stop' callbacks since we want
the timer to be stopped before the DMA buffer is released. Otherwise,
it could trigger a kernel panic in some circumstances, for instance
when the DMA buffer is already released but the timer callback is
still running.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20231206223211.12761-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"A single line patch for parisc which fixes the build in tinyconfig
configurations:
- Fix asm operand number out of range build error in bug table"
* tag 'parisc-for-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix asm operand number out of range build error in bug table
|
|
The Framework 16" laptop has the same controller as other Framework
models. Apply the presence detection quirk.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231206193927.2996-1-mario.limonciello@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-12-05 (ice, i40e, iavf)
This series contains updates to ice, i40e and iavf drivers.
Michal fixes incorrect usage of VF MSIX value and index calculation for
ice.
Marcin restores disabling of Rx VLAN filtering which was inadvertently
removed for ice.
Ivan Vecera corrects improper messaging of MFS port for i40e.
Jake fixes incorrect checking of coalesce values on iavf.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: validate tx_coalesce_usecs even if rx_coalesce_usecs is zero
i40e: Fix unexpected MFS warning message
ice: Restore fix disabling RX VLAN filtering
ice: change vfs.num_msix_per to vf->num_msix
====================
Link: https://lore.kernel.org/r/20231205211918.2123019-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In 4a56212774ac, USXGMII support was added for 6393X, but this was
lost in the PCS conversion (the blamed commit), most likely because
these efforts where more or less done in parallel.
Restore this feature by porting Michal's patch to fit the new
implementation.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Michal Smulski <michal.smulski@ooma.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Fixes: e5b732a275f5 ("net: dsa: mv88e6xxx: convert 88e639x to phylink_pcs")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Link: https://lore.kernel.org/r/20231205221359.3926018-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch is based on a detailed report and ideas from Yepeng Pan
and Christian Rossow.
ACK seq validation is currently following RFC 5961 5.2 guidelines:
The ACK value is considered acceptable only if
it is in the range of ((SND.UNA - MAX.SND.WND) <= SEG.ACK <=
SND.NXT). All incoming segments whose ACK value doesn't satisfy the
above condition MUST be discarded and an ACK sent back. It needs to
be noted that RFC 793 on page 72 (fifth check) says: "If the ACK is a
duplicate (SEG.ACK < SND.UNA), it can be ignored. If the ACK
acknowledges something not yet sent (SEG.ACK > SND.NXT) then send an
ACK, drop the segment, and return". The "ignored" above implies that
the processing of the incoming data segment continues, which means
the ACK value is treated as acceptable. This mitigation makes the
ACK check more stringent since any ACK < SND.UNA wouldn't be
accepted, instead only ACKs that are in the range ((SND.UNA -
MAX.SND.WND) <= SEG.ACK <= SND.NXT) get through.
This can be refined for new (and possibly spoofed) flows,
by not accepting ACK for bytes that were never sent.
This greatly improves TCP security at a little cost.
I added a Fixes: tag to make sure this patch will reach stable trees,
even if the 'blamed' patch was adhering to the RFC.
tp->bytes_acked was added in linux-4.2
Following packetdrill test (courtesy of Yepeng Pan) shows
the issue at hand:
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1024) = 0
// ---------------- Handshake ------------------- //
// when window scale is set to 14 the window size can be extended to
// 65535 * (2^14) = 1073725440. Linux would accept an ACK packet
// with ack number in (Server_ISN+1-1073725440. Server_ISN+1)
// ,though this ack number acknowledges some data never
// sent by the server.
+0 < S 0:0(0) win 65535 <mss 1400,nop,wscale 14>
+0 > S. 0:0(0) ack 1 <...>
+0 < . 1:1(0) ack 1 win 65535
+0 accept(3, ..., ...) = 4
// For the established connection, we send an ACK packet,
// the ack packet uses ack number 1 - 1073725300 + 2^32,
// where 2^32 is used to wrap around.
// Note: we used 1073725300 instead of 1073725440 to avoid possible
// edge cases.
// 1 - 1073725300 + 2^32 = 3221241997
// Oops, old kernels happily accept this packet.
+0 < . 1:1001(1000) ack 3221241997 win 65535
// After the kernel fix the following will be replaced by a challenge ACK,
// and prior malicious frame would be dropped.
+0 > . 1:1(0) ack 1001
Fixes: 354e4aa391ed ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yepeng Pan <yepeng.pan@cispa.de>
Reported-by: Christian Rossow <rossow@cispa.de>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20231205161841.2702925-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a wrong error checking in exynos_drm_dma.c module.
In the exynos_drm_register_dma function, both arm_iommu_create_mapping()
and iommu_get_domain_for_dev() functions are expected to return NULL as
an error.
However, the error checking is performed using the statement
if(IS_ERR(mapping)), which doesn't provide a suitable error value.
So check if 'mapping' is NULL, and if it is, return -ENODEV.
This issue[1] was reported by Dan.
Changelog v1:
- fix build warning.
[1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/
Reported-by : Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Smatch reports the warning below:
drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind()
error: 'crtc' dereferencing possible ERR_PTR()
The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV),
which can not be used directly. Fix this by checking the return value
before using it.
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Two series lived in parallel for some time, which led to this situation:
- The nvmem-layout container is used for dynamic layouts
- We now expect fixed layouts to also use the nvmem-layout container but
this does not require any additional driver, the support is built-in the
nvmem core.
Ensure we don't refuse to probe for wrong reasons.
Fixes: 27f699e578b1 ("nvmem: core: add support for fixed cells *layout*")
Cc: stable@vger.kernel.org
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20231124193814.360552-1-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adds support for Intashield IX-500/IX-550, UC-146/UC-157, PX-146/PX-157,
PX-203 and PX-475 (LPT port)
Cc: stable@vger.kernel.org
Signed-off-by: Cameron Williams <cang1@live.co.uk>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/AS4PR02MB790389C130410BD864C8DCC9C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Granite Rapids-D has an additional UART that is enumerated via ACPI.
Add ACPI ID for it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20231205195524.2705965-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The console is immediately assigned to the ma35d1 port without
checking its index. This oversight can lead to out-of-bounds
errors when the index falls outside the valid '0' to
MA35_UART_NR range. Such scenario trigges ran error like the
following:
UBSAN: array-index-out-of-bounds in drivers/tty/serial/ma35d1_serial.c:555:51
index -1 is out of range for type 'uart_ma35d1_port [17]
Check the index before using it and bail out with a warning.
Fixes: 930cbf92db01 ("tty: serial: Add Nuvoton ma35d1 serial driver support")
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Cc: Jacky Huang <ychuang3@nuvoton.com>
Cc: <stable@vger.kernel.org> # v6.5+
Link: https://lore.kernel.org/r/20231204163804.1331415-2-andi.shyti@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The commit 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs
cdev") has introduced a bug that leads to hid device corruption after
the replug operation.
Reverse device managed memory allocation for the report descriptor
to fix the issue.
Tested:
This change was tested on the AMD EthanolX CRB server with the BMC
based on the OpenBMC distribution. The BMC provides KVM functionality
via the USB gadget device:
- before: KVM page refresh results in a broken USB device,
- after: KVM page refresh works without any issues.
Fixes: 89ff3dfac604 ("usb: gadget: f_hid: fix f_hidg lifetime vs cdev")
Cc: stable@vger.kernel.org
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Link: https://lore.kernel.org/r/20231206080744.253-2-aladyshev22@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I conducted real-time testing and observed that
madvise_cold_or_pageout_pte_range() causes significant latency under
memory pressure, which can be effectively reduced by adding cond_resched()
within the loop.
I tested on the LicheePi 4A board using Cylictest for latency testing and
Ftrace for latency tracing. The board uses TH1520 processor and has a
memory size of 8GB. The kernel version is 6.5.0 with the PREEMPT_RT patch
applied.
The script I tested is as follows:
echo wakeup_rt > /sys/kernel/tracing/current_tracer
echo 1 > /sys/kernel/tracing/tracing_on
echo 0 > /sys/kernel/tracing/tracing_max_latency
stress-ng --vm 8 --vm-bytes 2G &
cyclictest --mlockall --smp --priority=99 --distance=0 --duration=30m
echo 0 > /sys/kernel/tracing/tracing_on
cat /sys/kernel/tracing/trace
The tracing results before modification are as follows:
# tracer: wakeup_rt
#
# wakeup_rt latency trace v1.1.5 on 6.5.0-rt6-r1208-00003-g999d221864bf
# --------------------------------------------------------------------
# latency: 2552 us, #6/6, CPU#3 | (M:preempt_rt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: cyclictest-196 (uid:0 nice:0 policy:1 rt_prio:99)
# -----------------
#
# _--------=> CPU#
# / _-------=> irqs-off/BH-disabled
# | / _------=> need-resched
# || / _-----=> need-resched-lazy
# ||| / _----=> hardirq/softirq
# |||| / _---=> preempt-depth
# ||||| / _--=> preempt-lazy-depth
# |||||| / _-=> migrate-disable
# ||||||| / delay
# cmd pid |||||||| time | caller
# \ / |||||||| \ | /
stress-n-206 3dn.h512 2us : 206:120:R + [003] 196: 0:R cyclictest
stress-n-206 3dn.h512 7us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup
=> ttwu_do_activate
=> try_to_wake_up
=> wake_up_process
=> hrtimer_wakeup
=> __hrtimer_run_queues
=> hrtimer_interrupt
=> riscv_timer_interrupt
=> handle_percpu_devid_irq
=> generic_handle_domain_irq
=> riscv_intc_irq
=> handle_riscv_irq
=> do_irq
stress-n-206 3dn.h512 9us#: 0
stress-n-206 3d...3.. 2544us : __schedule
stress-n-206 3d...3.. 2545us : 206:120:R ==> [003] 196: 0:R cyclictest
stress-n-206 3d...3.. 2551us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup_sched_switch
=> __schedule
=> preempt_schedule
=> migrate_enable
=> rt_spin_unlock
=> madvise_cold_or_pageout_pte_range
=> walk_pgd_range
=> __walk_page_range
=> walk_page_range
=> madvise_pageout
=> madvise_vma_behavior
=> do_madvise
=> sys_madvise
=> do_trap_ecall_u
=> ret_from_exception
The tracing results after modification are as follows:
# tracer: wakeup_rt
#
# wakeup_rt latency trace v1.1.5 on 6.5.0-rt6-r1208-00004-gca3876fc69a6-dirty
# --------------------------------------------------------------------
# latency: 1689 us, #6/6, CPU#0 | (M:preempt_rt VP:0, KP:0, SP:0 HP:0 #P:4)
# -----------------
# | task: cyclictest-217 (uid:0 nice:0 policy:1 rt_prio:99)
# -----------------
#
# _--------=> CPU#
# / _-------=> irqs-off/BH-disabled
# | / _------=> need-resched
# || / _-----=> need-resched-lazy
# ||| / _----=> hardirq/softirq
# |||| / _---=> preempt-depth
# ||||| / _--=> preempt-lazy-depth
# |||||| / _-=> migrate-disable
# ||||||| / delay
# cmd pid |||||||| time | caller
# \ / |||||||| \ | /
stress-n-232 0dn.h413 1us+: 232:120:R + [000] 217: 0:R cyclictest
stress-n-232 0dn.h413 12us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup
=> ttwu_do_activate
=> try_to_wake_up
=> wake_up_process
=> hrtimer_wakeup
=> __hrtimer_run_queues
=> hrtimer_interrupt
=> riscv_timer_interrupt
=> handle_percpu_devid_irq
=> generic_handle_domain_irq
=> riscv_intc_irq
=> handle_riscv_irq
=> do_irq
stress-n-232 0dn.h413 19us#: 0
stress-n-232 0d...3.. 1671us : __schedule
stress-n-232 0d...3.. 1676us+: 232:120:R ==> [000] 217: 0:R cyclictest
stress-n-232 0d...3.. 1687us : <stack trace>
=> __ftrace_trace_stack
=> __trace_stack
=> probe_wakeup_sched_switch
=> __schedule
=> preempt_schedule
=> migrate_enable
=> free_unref_page_list
=> release_pages
=> free_pages_and_swap_cache
=> tlb_batch_pages_flush
=> tlb_flush_mmu
=> unmap_page_range
=> unmap_vmas
=> unmap_region
=> do_vmi_align_munmap.constprop.0
=> do_vmi_munmap
=> __vm_munmap
=> sys_munmap
=> do_trap_ecall_u
=> ret_from_exception
After the modification, the cause of maximum latency is no longer
madvise_cold_or_pageout_pte_range(), so this modification can reduce the
latency caused by madvise_cold_or_pageout_pte_range().
Currently the madvise_cold_or_pageout_pte_range() function exhibits
significant latency under memory pressure, which can be effectively
reduced by adding cond_resched() within the loop.
When the batch_count reaches SWAP_CLUSTER_MAX, we reschedule
the task to ensure fairness and avoid long lock holding times.
Link: https://lkml.kernel.org/r/85363861af65fac66c7a98c251906afc0d9c8098.1695291046.git.wangjiexun@tinylab.org
Signed-off-by: Jiexun Wang <wangjiexun@tinylab.org>
Cc: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If nilfs2 reads a disk image with corrupted segment usage metadata, and
its segment usage information is marked as an error for the segment at the
write location, nilfs_sufile_set_segment_usage() can trigger WARN_ONs
during log writing.
Segments newly allocated for writing with nilfs_sufile_alloc() will not
have this error flag set, but this unexpected situation will occur if the
segment indexed by either nilfs->ns_segnum or nilfs->ns_nextnum (active
segment) was marked in error.
Fix this issue by inserting a sanity check to treat it as a file system
corruption.
Since error returns are not allowed during the execution phase where
nilfs_sufile_set_segment_usage() is used, this inserts the sanity check
into nilfs_sufile_mark_dirty() which pre-reads the buffer containing the
segment usage record to be updated and sets it up in a dirty state for
writing.
In addition, nilfs_sufile_set_segment_usage() is also called when
canceling log writing and undoing segment usage update, so in order to
avoid issuing the same kernel warning in that case, in case of
cancellation, avoid checking the error flag in
nilfs_sufile_set_segment_usage().
Link: https://lkml.kernel.org/r/20231205085947.4431-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+14e9f834f6ddecece094@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=14e9f834f6ddecece094
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit a08c7193e4f1 "mm/filemap: remove hugetlb special casing in
filemap.c", hugetlb pages are stored in the page cache in base page sized
indexes. This leads to multi index stores in the xarray which is only
supporting through CONFIG_XARRAY_MULTI. The other page cache user of
multi index stores ,THP, selects XARRAY_MULTI. Have CONFIG_HUGETLB_PAGE
follow this behavior as well to avoid the BUG() with a CONFIG_HUGETLB_PAGE
&& !CONFIG_XARRAY_MULTI config.
Link: https://lkml.kernel.org/r/20231204183234.348697-1-sidhartha.kumar@oracle.com
Fixes: a08c7193e4f1 ("mm/filemap: remove hugetlb special casing in filemap.c")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After the conversion to bus_to_subsys() and class_to_subsys(), the gdb
scripts listing the system buses and classes respectively was broken, fix
those by returning the subsys_priv pointer and have the various caller
de-reference either the 'bus' or 'class' structure members accordingly.
Link: https://lkml.kernel.org/r/20231130043317.174188-1-florian.fainelli@broadcom.com
Fixes: 7b884b7f24b4 ("driver core: class.c: convert to only use class_to_subsys")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
He is currently inactive (last message from him is two years ago [1]).
His media tree [2] is also dormant (latest activity is 6 years ago), yet
his site is still online [3].
Drop him from MAINTAINERS and add CREDITS entry for him. We thank him
for maintaining various DVB drivers.
[1]: https://lore.kernel.org/all/660772b3-0597-02db-ed94-c6a9be04e8e8@iki.fi/
[2]: https://git.linuxtv.org/anttip/media_tree.git/
[3]: https://palosaari.fi/linux/
Link: https://lkml.kernel.org/r/20231130083848.5396-1-bagasdotme@gmail.com
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clang static checker complains that value stored to 'from' is never read.
And memcpy_from_folio() only copy the last chunk memory from folio to
destination. Use 'to += chunk' to replace 'from += chunk' to fix this
typo problem.
Link: https://lkml.kernel.org/r/20231130034017.1210429-1-suhui@nfschina.com
Fixes: b23d03ef7af5 ("highmem: add memcpy_to_folio() and memcpy_from_folio()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When mounting a filesystem image with a block size larger than the page
size, nilfs2 repeatedly outputs long error messages with stack traces to
the kernel log, such as the following:
getblk(): invalid block size 8192 requested
logical block size: 512
...
Call Trace:
dump_stack_lvl+0x92/0xd4
dump_stack+0xd/0x10
bdev_getblk+0x33a/0x354
__breadahead+0x11/0x80
nilfs_search_super_root+0xe2/0x704 [nilfs2]
load_nilfs+0x72/0x504 [nilfs2]
nilfs_mount+0x30f/0x518 [nilfs2]
legacy_get_tree+0x1b/0x40
vfs_get_tree+0x18/0xc4
path_mount+0x786/0xa88
__ia32_sys_mount+0x147/0x1a8
__do_fast_syscall_32+0x56/0xc8
do_fast_syscall_32+0x29/0x58
do_SYSENTER_32+0x15/0x18
entry_SYSENTER_32+0x98/0xf1
...
This overloads the system logger. And to make matters worse, it sometimes
crashes the kernel with a memory access violation.
This is because the return value of the sb_set_blocksize() call, which
should be checked for errors, is not checked.
The latter issue is due to out-of-buffer memory being accessed based on a
large block size that caused sb_set_blocksize() to fail for buffers read
with the initial minimum block size that remained unupdated in the
super_block structure.
Since nilfs2 mkfs tool does not accept block sizes larger than the system
page size, this has been overlooked. However, it is possible to create
this situation by intentionally modifying the tool or by passing a
filesystem image created on a system with a large page size to a system
with a smaller page size and mounting it.
Fix this issue by inserting the expected error handling for the call to
sb_set_blocksize().
Link: https://lkml.kernel.org/r/20231129141547.4726-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Ignat Korchagin complained that a potential config regression was
introduced by commit 89cde455915f ("kexec: consolidate kexec and crash
options into kernel/Kconfig.kexec"). Before the commit, CONFIG_CRASH_DUMP
has no dependency on CONFIG_KEXEC. After the commit, CRASH_DUMP selects
KEXEC. That enforces system to have CONFIG_KEXEC=y as long as
CONFIG_CRASH_DUMP=Y which people may not want.
In Ignat's case, he sets CONFIG_CRASH_DUMP=y, CONFIG_KEXEC_FILE=y and
CONFIG_KEXEC=n because kexec_load interface could have security issue if
kernel/initrd has no chance to be signed and verified.
CRASH_DUMP has select of KEXEC because Eric, author of above commit, met a
LKP report of build failure when posting patch of earlier version. Please
see below link to get detail of the LKP report:
https://lore.kernel.org/all/3e8eecd1-a277-2cfb-690e-5de2eb7b988e@oracle.com/T/#u
In fact, that LKP report is triggered because arm's <asm/kexec.h> is
wrapped in CONFIG_KEXEC ifdeffery scope. That is wrong. CONFIG_KEXEC
controls the enabling/disabling of kexec_load interface, but not kexec
feature. Removing the wrongly added CONFIG_KEXEC ifdeffery scope in
<asm/kexec.h> of arm allows us to drop the select KEXEC for CRASH_DUMP.
Meanwhile, change arch/arm/kernel/Makefile to let machine_kexec.o
relocate_kernel.o depend on KEXEC_CORE.
Link: https://lkml.kernel.org/r/20231128054457.659452-1-bhe@redhat.com
Fixes: 89cde455915f ("kexec: consolidate kexec and crash options into kernel/Kconfig.kexec")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Tested-by: Eric DeVolder <eric_devolder@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
BITS_PER_BYTE is defined in bits.h.
Link: https://lkml.kernel.org/r/20231128174404.393393-1-andriy.shevchenko@linux.intel.com
Fixes: e8eed5f7366f ("units: Add BYTES_PER_*BIT")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Damian Muszynski <damian.muszynski@intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After commit 88a6f8994421 ("crash: memory and CPU hotplug sysfs
attributes"), on x86_64, if only below kernel configs related to kdump are
set, compiling error are triggered.
----
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
------
------------------------------------------------------
drivers/base/cpu.c: In function `crash_hotplug_show':
drivers/base/cpu.c:309:40: error: implicit declaration of function `crash_hotplug_cpu_support'; did you mean `crash_hotplug_show'? [-Werror=implicit-function-declaration]
309 | return sysfs_emit(buf, "%d\n", crash_hotplug_cpu_support());
| ^~~~~~~~~~~~~~~~~~~~~~~~~
| crash_hotplug_show
cc1: some warnings being treated as errors
------------------------------------------------------
CONFIG_KEXEC is used to enable kexec_load interface, the
crash_notes/crash_notes_size/crash_hotplug showing depends on
CONFIG_KEXEC is incorrect. It should depend on KEXEC_CORE instead.
Fix it now.
Link: https://lkml.kernel.org/r/20231128055248.659808-1-bhe@redhat.com
Fixes: 88a6f8994421 ("crash: memory and CPU hotplug sysfs attributes")
Signed-off-by: Baoquan He <bhe@redhat.com>
Tested-by: Ignat Korchagin <ignat@cloudflare.com> [compile-time only]
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Eric DeVolder <eric_devolder@yahoo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a scheme is set to not applied to any monitoring target region for any
reasons including the target access pattern, quota, filters, or
watermarks, writing 'update_schemes_tried_regions' to 'state' DAMON sysfs
file can indefinitely hang. Fix the case by implementing a timeout for
the operation. The time limit is two apply intervals of each scheme.
Link: https://lkml.kernel.org/r/20231124213840.39157-1-sj@kernel.org
Fixes: 4d4e41b68299 ("mm/damon/sysfs-schemes: do not update tried regions more than one DAMON snapshot")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit 8e1f385104ac ("kill task_struct->thread_group") remove
the thread_group, we will encounter below issue.
(gdb) lx-ps
TASK PID COMM
0xffff800086503340 0 swapper/0
Python Exception <class 'gdb.error'>: There is no member named thread_group.
Error occurred in Python: There is no member named thread_group.
We use signal->thread_head to iterate all threads instead.
[Kuan-Ying.Lee@mediatek.com: v2]
Link: https://lkml.kernel.org/r/20231129065142.13375-2-Kuan-Ying.Lee@mediatek.com
Link: https://lkml.kernel.org/r/20231127070404.4192-2-Kuan-Ying.Lee@mediatek.com
Fixes: 8e1f385104ac ("kill task_struct->thread_group")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
PTE_MARKER_UFFD_WP is a subconfig for userfaultfd. To make it clear,
switch to use menuconfig for userfaultfd.
Link: https://lkml.kernel.org/r/20231123224204.1060152-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 05f1edac8009 ("selftests/mm: run all tests from run_vmtests.sh")
fixed the inconsistency caused by tests being defined as TEST_GEN_PROGS.
This issue was leading to tests not being executed via run_vmtests.sh and
furthermore some tests running twice due to the kselftests wrapper also
executing them.
Fix the definition of two tests (soft-dirty and pagemap_ioctl) that are
still incorrectly defined.
Link: https://lkml.kernel.org/r/20231120222908.28559-1-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Regions split function ('damon_split_region_at()') is called at the
beginning of an aggregation interval, and when DAMOS applying the actions
and charging quota. Because 'nr_accesses' fields of all regions are reset
at the beginning of each aggregation interval, and DAMOS was applying the
action at the end of each aggregation interval, there was no need to copy
the 'nr_accesses' field to the split-out region.
However, commit 42f994b71404 ("mm/damon/core: implement scheme-specific
apply interval") made DAMOS applies action on its own timing interval.
Hence, 'nr_accesses' should also copied to split-out regions, but the
commit didn't. Fix it by copying it.
Link: https://lkml.kernel.org/r/20231119171529.66863-1-sj@kernel.org
Fixes: 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
group_cpus_evenly() could be part of storage driver's error handler, such
as nvme driver, when may happen during CPU hotplug, in which storage queue
has to drain its pending IOs because all CPUs associated with the queue
are offline and the queue is becoming inactive. And handling IO needs
error handler to provide forward progress.
Then deadlock is caused:
1) inside CPU hotplug handler, CPU hotplug lock is held, and blk-mq's
handler is waiting for inflight IO
2) error handler is waiting for CPU hotplug lock
3) inflight IO can't be completed in blk-mq's CPU hotplug handler
because error handling can't provide forward progress.
Solve the deadlock by not holding CPU hotplug lock in group_cpus_evenly(),
in which two stage spreads are taken: 1) the 1st stage is over all present
CPUs; 2) the end stage is over all other CPUs.
Turns out the two stage spread just needs consistent 'cpu_present_mask',
and remove the CPU hotplug lock by storing it into one local cache. This
way doesn't change correctness, because all CPUs are still covered.
Link: https://lkml.kernel.org/r/20231120083559.285174-1-ming.lei@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All addresses printed by checkstack have an extra incorrect 0 appended at
the end.
This was introduced with commit 677f1410e058 ("scripts/checkstack.pl: don't
display $dre as different entity"): since then the address is taken from
the line which contains the function name, instead of the line which
contains stack consumption. E.g. on s390:
0000000000100a30 <do_one_initcall>:
...
100a44: e3 f0 ff 70 ff 71 lay %r15,-144(%r15)
So the used regex which matches spaces and hexadecimal numbers to extract
an address now matches a different substring. Subsequently replacing spaces
with 0 appends a zero at the and, instead of replacing leading spaces.
Fix this by using the proper regex, and simplify the code a bit.
Link: https://lkml.kernel.org/r/20231120183719.2188479-2-hca@linux.ibm.com
Fixes: 677f1410e058 ("scripts/checkstack.pl: don't display $dre as different entity")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Maninder Singh <maninder1.s@samsung.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vaneet Narang <v.narang@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In add_memory_resource(), creation of memory block devices occurs after
successful call to arch_add_memory(). However, creation of memory block
devices could fail. In that case, arch_remove_memory() is called to
perform necessary cleanup.
Currently with or without altmap support, arch_remove_memory() is always
passed with altmap set to NULL during error handling. This leads to
freeing of struct pages using free_pages(), eventhough the allocation
might have been performed with altmap support via
altmap_alloc_block_buf().
Fix the error handling by passing altmap in arch_remove_memory(). This
ensures the following:
* When altmap is disabled, deallocation of the struct pages array occurs
via free_pages().
* When altmap is enabled, deallocation occurs via vmem_altmap_free().
Link: https://lkml.kernel.org/r/20231120145354.308999-3-sumanthk@linux.ibm.com
Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
From Documentation/core-api/memory-hotplug.rst:
When adding/removing/onlining/offlining memory or adding/removing
heterogeneous/device memory, we should always hold the mem_hotplug_lock
in write mode to serialise memory hotplug (e.g. access to global/zone
variables).
mhp_(de)init_memmap_on_memory() functions can change zone stats and
struct page content, but they are currently called w/o the
mem_hotplug_lock.
When memory block is being offlined and when kmemleak goes through each
populated zone, the following theoretical race conditions could occur:
CPU 0: | CPU 1:
memory_offline() |
-> offline_pages() |
-> mem_hotplug_begin() |
... |
-> mem_hotplug_done() |
| kmemleak_scan()
| -> get_online_mems()
| ...
-> mhp_deinit_memmap_on_memory() |
[not protected by mem_hotplug_begin/done()]|
Marks memory section as offline, | Retrieves zone_start_pfn
poisons vmemmap struct pages and updates | and struct page members.
the zone related data |
| ...
| -> put_online_mems()
Fix this by ensuring mem_hotplug_lock is taken before performing
mhp_init_memmap_on_memory(). Also ensure that
mhp_deinit_memmap_on_memory() holds the lock.
online/offline_pages() are currently only called from
memory_block_online/offline(), so it is safe to move the locking there.
Link: https://lkml.kernel.org/r/20231120145354.308999-2-sumanthk@linux.ibm.com
Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
My company email address is going to be disabled so let's create a mapping
that links to my private/community email just in case people might still
try to reach me via the old one.
Link: https://lkml.kernel.org/r/20231117022807.29461-1-clin@suse.com
Signed-off-by: Chester Lin <clin@suse.com>
Cc: Chester Lin <chester62515@gmail.com>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Conor Dooley <conor.dooley@microchip.com>
Cc: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzbot reports oops in lockdep's __lock_acquire(), called from
__pte_offset_map_lock() called from filemap_map_pages(); or when I run the
repro, the oops comes in pmd_install(), called from filemap_map_pmd()
called from filemap_map_pages(), just before the __pte_offset_map_lock().
The problem is that filemap_map_pmd() has been assuming that when it finds
pmd_none(), a page table has already been prepared in prealloc_pte; and
indeed do_fault_around() has been careful to preallocate one there, when
it finds pmd_none(): but what if *pmd became none in between?
My 6.6 mods in mm/khugepaged.c, avoiding mmap_lock for write, have made it
easy for *pmd to be cleared while servicing a page fault; but even before
those, a huge *pmd might be zapped while a fault is serviced.
The difference in symptomatic stack traces comes from the "memory model"
in use: pmd_install() uses pmd_populate() uses page_to_pfn(): in some
models that is strict, and will oops on the NULL prealloc_pte; in other
models, it will construct a bogus value to be populated into *pmd, then
__pte_offset_map_lock() oops when trying to access split ptlock pointer
(or some other symptom in normal case of ptlock embedded not pointer).
Link: https://lore.kernel.org/linux-mm/20231115065506.19780-1-jose.pekkarinen@foxhound.fi/
Link: https://lkml.kernel.org/r/6ed0c50c-78ef-0719-b3c5-60c0c010431c@google.com
Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-and-tested-by: syzbot+89edd67979b52675ddec@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/0000000000005e44550608a0806c@google.com/
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>,
Cc: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the length passed in is 0, the pagemap_scan_test_walk() caller should
bail. This error causes at least a WARN_ON().
Link: https://lkml.kernel.org/r/20231116031352.40853-1-lizhi.xu@windriver.com
Reported-by: syzbot+32d3767580a1ea339a81@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000000526f2060a30a085@google.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
__FILE__ is not guaranteed to exist in current dir. Replace that with
argv[0] for memory map test.
Link: https://lkml.kernel.org/r/20231116201547.536857-4-peterx@redhat.com
Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The new pagemap ioctl contains a fast path for wr-protections without
looking into category masks. It forgets to check PM_SCAN_WP_MATCHING
before applying the wr-protections. It can cause, e.g., pte markers
installed on archs that do not even support uffd wr-protect.
WARNING: CPU: 0 PID: 5059 at mm/memory.c:1520 zap_pte_range mm/memory.c:1520 [inline]
Link: https://lkml.kernel.org/r/20231116201547.536857-3-peterx@redhat.com
Fixes: 12f6b01a0bcb ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+7ca4b2719dc742b8d0a4@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/pagemap: A few fixes to the recent PAGEMAP_SCAN".
This series should fix two known reports from syzbot on the new
PAGEMAP_SCAN ioctl():
https://lore.kernel.org/all/000000000000b0e576060a30ee3b@google.com/
https://lore.kernel.org/all/000000000000773fa7060a31e2cc@google.com/
The 3rd patch is something I found when testing these patches.
This patch (of 3):
The new ioctl(PAGEMAP_SCAN) relies on vma wr-protect capability provided
by userfault, however in the vma test it didn't explicitly require the vma
to have wr-protect function enabled, even if PM_SCAN_WP_MATCHING flag is
set.
It means the pagemap code can now apply uffd-wp bit to a page in the vma
even if not registered to userfaultfd at all.
Then in whatever way as long as the pte got written and page fault
resolved, we'll apply the write bit even if uffd-wp bit is set. We'll see
a pte that has both UFFD_WP and WRITE bit set. Anything later that looks
up the pte for uffd-wp bit will trigger the warning:
WARNING: CPU: 1 PID: 5071 at arch/x86/include/asm/pgtable.h:403 pte_uffd_wp arch/x86/include/asm/pgtable.h:403 [inline]
Fix it by doing proper check over the vma attributes when
PM_SCAN_WP_MATCHING is specified.
Link: https://lkml.kernel.org/r/20231116201547.536857-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20231116201547.536857-2-peterx@redhat.com
Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+e94c5aaf7890901ebf9b@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Erhard reported that the 6.7-rc1 kernel panics on boot if being
built with clang-16. The problem was not reproducible with gcc.
[ 5.975049] general protection fault, probably for non-canonical address 0xf555515555555557: 0000 [#1] SMP KASAN PTI
[ 5.976422] KASAN: maybe wild-memory-access in range [0xaaaaaaaaaaaaaab8-0xaaaaaaaaaaaaaabf]
[ 5.977475] CPU: 3 PID: 1 Comm: systemd Not tainted 6.7.0-rc1-Zen3 #77
[ 5.977860] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
[ 5.977860] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5
[ 5.977860] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3
[ 5.977860] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02
[ 5.977860] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08
[ 5.977860] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa
[ 5.977860] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000
[ 5.977860] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18
[ 5.977860] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba
[ 5.977860] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000
[ 5.977860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5.977860] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0
[ 5.977860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5.977860] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5.977860] Call Trace:
[ 5.977860] <TASK>
[ 5.977860] ? __die_body+0x16/0x75
[ 5.977860] ? die_addr+0x4a/0x70
[ 5.977860] ? exc_general_protection+0x1c9/0x2d0
[ 5.977860] ? cgroup_mkdir+0x455/0x9fb
[ 5.977860] ? __x64_sys_mkdir+0x69/0x80
[ 5.977860] ? asm_exc_general_protection+0x26/0x30
[ 5.977860] ? obj_cgroup_charge_pages+0x27/0x2d5
[ 5.977860] obj_cgroup_charge+0x114/0x1ab
[ 5.977860] pcpu_alloc+0x1a6/0xa65
[ 5.977860] ? mem_cgroup_css_alloc+0x1eb/0x1140
[ 5.977860] ? cgroup_apply_control_enable+0x26b/0x7c0
[ 5.977860] mem_cgroup_css_alloc+0x23f/0x1140
[ 5.977860] cgroup_apply_control_enable+0x26b/0x7c0
[ 5.977860] ? cgroup_kn_set_ugid+0x2d/0x1a0
[ 5.977860] cgroup_mkdir+0x455/0x9fb
[ 5.977860] ? __cfi_cgroup_mkdir+0x10/0x10
[ 5.977860] kernfs_iop_mkdir+0x130/0x170
[ 5.977860] vfs_mkdir+0x405/0x530
[ 5.977860] do_mkdirat+0x188/0x1f0
[ 5.977860] __x64_sys_mkdir+0x69/0x80
[ 5.977860] do_syscall_64+0x7d/0x100
[ 5.977860] ? do_syscall_64+0x89/0x100
[ 5.977860] ? do_syscall_64+0x89/0x100
[ 5.977860] ? do_syscall_64+0x89/0x100
[ 5.977860] ? do_syscall_64+0x89/0x100
[ 5.977860] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 5.977860] RIP: 0033:0x7f297671defb
[ 5.977860] Code: 8b 05 39 7f 0d 00 bb ff ff ff ff 64 c7 00 16 00 00 00 e9 61 ff ff ff e8 23 0c 02 00 0f 1f 00 f3 0f 1e fa b88
[ 5.977860] RSP: 002b:00007ffee6242bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000053
[ 5.977860] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f297671defb
[ 5.977860] RDX: 0000000000000000 RSI: 00000000000001ed RDI: 000055c6b449f0e0
[ 5.977860] RBP: 00007ffee6242bf0 R08: 000000000000000e R09: 0000000000000000
[ 5.977860] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c6b445db80
[ 5.977860] R13: 00000000000003a0 R14: 00007f2976a68651 R15: 00000000000003a0
[ 5.977860] </TASK>
[ 5.977860] Modules linked in:
[ 6.014095] ---[ end trace 0000000000000000 ]---
[ 6.014701] RIP: 0010:obj_cgroup_charge_pages+0x27/0x2d5
[ 6.015348] Code: 90 90 90 55 41 57 41 56 41 55 41 54 53 89 d5 41 89 f6 49 89 ff 48 b8 00 00 00 00 00 fc ff df 49 83 c7 10 4d3
[ 6.017575] RSP: 0018:ffffc9000001fb18 EFLAGS: 00010a02
[ 6.018255] RAX: dffffc0000000000 RBX: aaaaaaaaaaaaaaaa RCX: ffff8883eb9a8b08
[ 6.019120] RDX: 0000000000000005 RSI: 0000000000400cc0 RDI: aaaaaaaaaaaaaaaa
[ 6.019983] RBP: 0000000000000005 R08: 3333333333333333 R09: 0000000000000000
[ 6.020849] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883eb9a8b18
[ 6.021747] R13: 1555555555555557 R14: 0000000000400cc0 R15: aaaaaaaaaaaaaaba
[ 6.022609] FS: 00007f2976438b40(0000) GS:ffff8883eb980000(0000) knlGS:0000000000000000
[ 6.023593] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.024296] CR2: 00007f29769e0060 CR3: 0000000107222003 CR4: 0000000000370eb0
[ 6.025279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6.026139] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6.027000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Actually the problem is caused by uninitialized local variable in
current_obj_cgroup(). If the root memory cgroup is set as an active
memory cgroup for a charging scope (as in the trace, where systemd tries
to create the first non-root cgroup, so the parent cgroup is the root
cgroup), the "for" loop is skipped and uninitialized objcg is returned,
causing a panic down the accounting stack.
The fix is trivial: initialize the objcg variable to NULL unconditionally
before the "for" loop.
[vbabka@suse.cz: remove redundant assignment]
Link: https://lkml.kernel.org/r/4bd106d5-c3e3-6731-9a74-cff81e2392de@suse.cz
Link: https://lkml.kernel.org/r/20231116025109.3775055-1-roman.gushchin@linux.dev
Fixes: e86828e5446d ("mm: kmem: scoped objcg protection")
Signed-off-by: Roman Gushchin (Cruise) <roman.gushchin@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1959
Tested-by: Erhard Furtner <erhard_f@mailbox.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
set_track_prepare() will call __alloc_pages() which attempts to acquire
zone->lock(spinlocks), so move it outside object->lock(raw_spinlocks)
because it's not right to acquire spinlocks while holding raw_spinlocks in
RT mode.
Link: https://lkml.kernel.org/r/20231115082138.2649870-3-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix invalid wait context of set_track_prepare()".
Geert reported an invalid wait context[1] which is resulted by moving
set_track_prepare() inside kmemleak_lock. This is not allowed because in
RT mode, the spinlocks can be preempted but raw_spinlocks can not, so it
is not allowd to acquire spinlocks while holding raw_spinlocks. The
second patch fix same problem in kmemleak_update_trace().
This patch (of 2):
Move the initialisation of object back to__alloc_object() because
set_track_prepare() attempt to acquire zone->lock(spinlocks) while
__link_object is holding kmemleak_lock(raw_spinlocks). This is not right
for RT mode.
This reverts commit 245245c2fffd00 ("mm/kmemleak: move the initialisation
of object to __link_object").
Link: https://lkml.kernel.org/r/20231115082138.2649870-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20231115082138.2649870-2-liushixin2@huawei.com
Fixes: 245245c2fffd ("mm/kmemleak: move the initialisation of object to __link_object")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/linux-mm/CAMuHMdWj0UzwNaxUvcocTfh481qRJpOWwXxsJCTJfu1oCqvgdA@mail.gmail.com/ [1]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Patrick Wang <patrick.wang.shcn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We have a report of this WARN() triggering. Let's print the offending
swp_entry_t to help diagnosis.
Link: https://lkml.kernel.org/r/000000000000b0e576060a30ee3b@google.com
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The routine __vma_private_lock tests for the existence of a reserve map
associated with a private hugetlb mapping. A pointer to the reserve map
is in vma->vm_private_data. __vma_private_lock was checking the pointer
for NULL. However, it is possible that the low bits of the pointer could
be used as flags. In such instances, vm_private_data is not NULL and not
a valid pointer. This results in the null-ptr-deref reported by syzbot:
general protection fault, probably for non-canonical address 0xdffffc000000001d:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88
8cf78c29e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1
0/09/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004
...
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5753 [inline]
lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718
down_write+0x93/0x200 kernel/locking/rwsem.c:1573
hugetlb_vma_lock_write mm/hugetlb.c:300 [inline]
hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291
__hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447
hugetlb_zap_begin include/linux/hugetlb.h:258 [inline]
unmap_vmas+0x2f4/0x470 mm/memory.c:1733
exit_mmap+0x1ad/0xa60 mm/mmap.c:3230
__mmput+0x12a/0x4d0 kernel/fork.c:1349
mmput+0x62/0x70 kernel/fork.c:1371
exit_mm kernel/exit.c:567 [inline]
do_exit+0x9ad/0x2a20 kernel/exit.c:861
__do_sys_exit kernel/exit.c:991 [inline]
__se_sys_exit kernel/exit.c:989 [inline]
__x64_sys_exit+0x42/0x50 kernel/exit.c:989
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Mask off low bit flags before checking for NULL pointer. In addition, the
reserve map only 'belongs' to the OWNER (parent in parent/child
relationships) so also check for the OWNER flag.
Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com
Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/
Fixes: bf4916922c60 ("hugetlbfs: extend hugetlb_vma_lock to private VMAs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add myself as the fallthough maintainer for material under lib/.
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When using audio from ADV7533 or ADV7535 and describing the audio
card via simple-audio-card, the '#sound-dai-cells' needs to be passed.
Document the '#sound-dai-cells' property to fix the following
dt-schema warning:
imx8mn-beacon-kit.dtb: hdmi@3d: '#sound-dai-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/bridge/adi,adv7533.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20231206093643.2198562-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
i.MX23 has two LCDIF interrupts instead of a single one like other
i.MX devices.
Take this into account for properly describing the i.MX23 LCDIF
interrupts.
This fixes the following dt-schema warning:
imx23-olinuxino.dtb: lcdif@80030000: interrupts: [[46], [45]] is too long
from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231206112337.2234849-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.7
Pull MD fixes from Song:
"This set from Yu Kuai fixes issues around sync_work, which was introduced
in 6.7 kernels."
* tag 'md-fixes-20231206' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: fix stopping sync thread
md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly()
md: fix missing flush of sync_work
|
|
Adding test that tries to trigger the BUG_IN during early map update
in prog_array_map_poke_run function.
The idea is to share prog array map between thread that constantly
updates it and another one loading a program that uses that prog
array.
Eventually we will hit a place where the program is ok to be updated
(poke->tailcall_target_stable check) but the address is still not
registered in kallsyms, so the bpf_arch_text_poke returns -EINVAL
and cause imbalance for the next tail call update check, which will
fail with -EBUSY in bpf_arch_text_poke as described in previous fix.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-3-jolsa@kernel.org
|
|
Lee pointed out issue found by syscaller [0] hitting BUG in prog array
map poke update in prog_array_map_poke_run function due to error value
returned from bpf_arch_text_poke function.
There's race window where bpf_arch_text_poke can fail due to missing
bpf program kallsym symbols, which is accounted for with check for
-EINVAL in that BUG_ON call.
The problem is that in such case we won't update the tail call jump
and cause imbalance for the next tail call update check which will
fail with -EBUSY in bpf_arch_text_poke.
I'm hitting following race during the program load:
CPU 0 CPU 1
bpf_prog_load
bpf_check
do_misc_fixups
prog_array_map_poke_track
map_update_elem
bpf_fd_array_map_update_elem
prog_array_map_poke_run
bpf_arch_text_poke returns -EINVAL
bpf_prog_kallsyms_add
After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next
poke update fails on expected jump instruction check in bpf_arch_text_poke
with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run.
Similar race exists on the program unload.
Fixing this by moving the update to bpf_arch_poke_desc_update function which
makes sure we call __bpf_arch_text_poke that skips the bpf address check.
Each architecture has slightly different approach wrt looking up bpf address
in bpf_arch_text_poke, so instead of splitting the function or adding new
'checkip' argument in previous version, it seems best to move the whole
map_poke_run update as arch specific code.
[0] https://syzkaller.appspot.com/bug?extid=97a4fe20470e9bc30810
Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Reported-by: syzbot+97a4fe20470e9bc30810@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Lee Jones <lee@kernel.org>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-2-jolsa@kernel.org
|
|
We need to disable this after the last eviction
call, but before we disable the SDMA IP.
Fixes: b70438004a14 ("drm/amdgpu: move buffer funcs setting up a level")
Link: https://lore.kernel.org/r/87edgv4x3i.fsf@vps.thesusis.net
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Tested-by: Phillip Susi <phill@thesusis.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Phillip Susi <phill@thesusis.net>
Cc: Luben Tuikov <ltuikov89@gmail.com>
|
|
MP0 v13.0.6 SOCs don't support DRM MGCG.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
HDP 4.4.2 clockgating is enabled by default, update the flags
accordingly.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Check if function is implemented before making the call.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only PSPv13.0.6 SOCs take a longer time to reach steady state. Other
PSPv13 based SOCs don't need extended wait. Also, reduce PSPv13.0.6 wait
time.
Cc: stable@vger.kernel.org
Fixes: fc5988907156 ("drm/amdgpu: update retry times for psp vmbx wait")
Fixes: d8c1925ba8cd ("drm/amdgpu: update retry times for psp BL wait")
Link: https://lore.kernel.org/amd-gfx/34dd4c66-f7bf-44aa-af8f-c82889dd652c@amd.com/
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Does the same thing as:
commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302107.hUDXVyWT-lkp@intel.com/
Fixes: 67e38874b85b ("drm/amd/display: Increase num voltage states to 40")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Samson Tam <samson.tam@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
|
|
sort error data list to optimize the printing order.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Boot time error query is not available until fw a10109
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
support new mca smu error code decoding from smu 85.86.0 for smu v13.0.6
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Increment the driver if version and add new mems to the mertics table.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
UBSAN errors observed in dmesg.
array-index-out-of-bounds in dml2/display_mode_core.c
[How]
Fix the index.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Some eDP panels's ext caps don't write initial value cause the value of
dpcd_addr(0x317) is random. It means that sometimes the eDP will
clarify it is OLED, miniLED...etc cause the backlight control interface
is incorrect.
[HOW]
Add a new panel patch to remove sink ext caps(HDR,OLED...etc)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
VBIOS has suggested to use channel_width=2 for any ASIC that uses vram
info 3.0. This is because channel_width in the vram table no longer
represents the memory width
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently sync thread is stopped from multiple contex:
- idle_sync_thread
- frozen_sync_thread
- __md_stop_writes
- md_set_readonly
- do_md_stop
And there are some problems:
1) sync_work is flushed while reconfig_mutex is grabbed, this can
deadlock because the work function will grab reconfig_mutex as well.
2) md_reap_sync_thread() can't be called directly while md_do_sync() is
not finished yet, for example, commit 130443d60b1b ("md: refactor
idle/frozen_sync_thread() to fix deadlock").
3) If MD_RECOVERY_RUNNING is not set, there is no need to stop
sync_thread at all because sync_thread must not be registered.
Factor out a helper stop_sync_thread(), so that above contex will behave
the same. Fix 1) by flushing sync_work after reconfig_mutex is released,
before waiting for sync_thread to be done; Fix 2) bt letting daemon thread
to unregister sync_thread; Fix 3) by always checking MD_RECOVERY_RUNNING
first.
Fixes: db5e653d7c9f ("md: delay choosing sync action to md_start_sync()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-4-yukuai1@huaweicloud.com
|
|
If md_set_readonly() failed, the array could still be read-write, however
'MD_RECOVERY_FROZEN' could still be set, which leave the array in an
abnormal state that sync or recovery can't continue anymore.
Hence make sure the flag is cleared after md_set_readonly() returns.
Fixes: 88724bfa68be ("md: wait for pending superblock updates before switching to read-only")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-3-yukuai1@huaweicloud.com
|
|
Commit ac619781967b ("md: use separate work_struct for md_start_sync()")
use a new sync_work to replace del_work, however, stop_sync_thread() and
__md_stop_writes() was trying to wait for sync_thread to be done, hence
they should switch to use sync_work as well.
Noted that md_start_sync() from sync_work will grab 'reconfig_mutex',
hence other contex can't held the same lock to flush work, and this will
be fixed in later patches.
Fixes: ac619781967b ("md: use separate work_struct for md_start_sync()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-2-yukuai1@huaweicloud.com
|
|
Disable MCBP(mid command buffer preemption) by default as old Mesa
hangs with it. We shall not enable the feature that breaks old usermode
driver.
Fixes: 50a7c8765ca6 ("drm/amdgpu: enable mcbp by default on gfx9")
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Since 64 bit cmpxchg() is very expensive on 32bit architectures, the
timestamp used by the ring buffer does some interesting tricks to be able
to still have an atomic 64 bit number. It originally just used 60 bits and
broke it up into two 32 bit words where the extra 2 bits were used for
synchronization. But this was not enough for all use cases, and all 64
bits were required.
The 32bit version of the ring buffer timestamp was then broken up into 3
32bit words using the same counter trick. But one update was not done. The
check to see if the read operation was done without interruption only
checked the first two words and not last one (like it had before this
update). Fix it by making sure all three updates happen without
interruption by comparing the initial counter with the last updated
counter.
Link: https://lore.kernel.org/linux-trace-kernel/20231206100050.3100b7bb@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f03f2abce4f39 ("ring-buffer: Have 32 bit time stamps use all 64 bits")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There's a race where if an event is discarded from the ring buffer and an
interrupt were to happen at that time and insert an event, the time stamp
is still used from the discarded event as an offset. This can screw up the
timings.
If the event is going to be discarded, set the "before_stamp" to zero.
When a new event comes in, it compares the "before_stamp" with the
"write_stamp" and if they are not equal, it will insert an absolute
timestamp. This will prevent the timings from getting out of sync due to
the discarded event.
Link: https://lore.kernel.org/linux-trace-kernel/20231206100244.5130f9b3@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 6f6be606e763f ("ring-buffer: Force before_stamp and write_stamp to be different on discard")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Reconnect worker currently assumes that the server struct
is alive and only takes reference on the server if it needs
to call smb2_reconnect.
With the new ability to disable channels based on whether the
server has multichannel disabled, this becomes a problem when
we need to disable established channels. While disabling the
channels and deallocating the server, there could be reconnect
work that could not be cancelled (because it started).
This change forces the reconnect worker to unconditionally
take a reference on the server when it runs.
Also, this change now allows smb2_reconnect to know if it was
called by the reconnect worker. Based on this, the cifs_put_tcp_session
can decide whether it can cancel the reconnect work synchronously or not.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This reverts commit 19a4b9d6c372cab6a3b2c9a061a236136fe95274.
This earlier commit was making an assumption that each mod_delayed_work
called for the reconnect work would result in smb2_reconnect_server
being called twice. This assumption turns out to be untrue. So reverting
this change for now.
I will submit a follow-up patch to fix the actual problem in a different
way.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A concurrently running sock_orphan() may NULL the sk_socket pointer in
between check and deref. Follow other users (like nft_meta.c for
instance) and acquire sk_callback_lock before dereferencing sk_socket.
Fixes: 0265ab44bacc ("[NETFILTER]: merge ipt_owner/ip6t_owner in xt_owner")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.7
A bunch of fixes addressing issues around the notification support that
was added this cycle. They address issue in partition IDs handling in
ffa_notification_info_get(), notifications cleanup path and the size of
the allocation in ffa_partitions_cleanup().
It also adds check for the notification enabled state so that the drivers
registering the callbacks can be rejected if not enabled/supported.
It also moves the partitions setup operation after the notification
initialisation so that the driver has the correct state for notification
enabled/supported before the partitions are initialised/setup.
It also now allows FF-A initialisation to complete successfully even
when the notification initialisation fails as it is an optional support
in the specification. Initial support just allowed it only if the
firmware didn't support notifications.
Finally, it also adds a fix for smatch warning by declaring ffa_bus_type
structure in the header.
* tag 'ffa-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix ffa_notification_info_get() IDs handling
firmware: arm_ffa: Fix the size of the allocation in ffa_partitions_cleanup()
firmware: arm_ffa: Fix FFA notifications cleanup path
firmware: arm_ffa: Add checks for the notification enabled state
firmware: arm_ffa: Setup the partitions after the notification initialisation
firmware: arm_ffa: Allow FF-A initialisation even when notification fails
firmware: arm_ffa: Declare ffa_bus_type structure in the header
Link: https://lore.kernel.org/r/20231116191603.929767-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Validate table family when looking up for it via NFTA_TABLE_HANDLE.
Fixes: 3ecbfd65f50e ("netfilter: nf_tables: allocate handle and delete objects via handle")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
If dynset expressions provided by userspace is larger than the declared
set expressions, then bail out.
Fixes: 48b0ae046ee9 ("netfilter: nftables: netlink support for several set element expressions")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Maze reports "tcp option fastopen exists" fails to match on
OpenWrt 22.03.5, r20134-5f15225c1e (5.10.176) router.
"tcp option fastopen exists" translates to:
inet
[ exthdr load tcpopt 1b @ 34 + 0 present => reg 1 ]
[ cmp eq reg 1 0x00000001 ]
.. but existing nft userspace generates a 1-byte compare.
On LSB (x86), "*reg32 = 1" is identical to nft_reg_store8(reg32, 1), but
not on MSB, which will place the 1 last. IOW, on bigendian aches the cmp8
is awalys false.
Make sure we store this in a consistent fashion, so existing userspace
will also work on MSB (bigendian).
Regardless of this patch we can also change nft userspace to generate
'reg32 == 0' and 'reg32 != 0' instead of u8 == 0 // u8 == 1 when
adding 'option x missing/exists' expressions as well.
Fixes: 3c1fece8819e ("netfilter: nft_exthdr: Allow checking TCP option presence, too")
Fixes: b9f9a485fb0e ("netfilter: nft_exthdr: add boolean DCCP option matching")
Fixes: 055c4b34b94f ("netfilter: nft_fib: Support existence check")
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/CAHo-OozyEqHUjL2-ntATzeZOiuftLWZ_HU6TOM_js4qLfDEAJg@mail.gmail.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Otherwise set elements can be deactivated twice which will cause a crash.
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We should pass a pointer to global_hook to the get_proto_defrag_hook()
instead of its value, since the passed value won't be updated even if
the request module was loaded successfully.
Log:
[ 54.915713] nf_defrag_ipv4 has bad registration
[ 54.915779] WARNING: CPU: 3 PID: 6323 at net/netfilter/nf_bpf_link.c:62 get_proto_defrag_hook+0x137/0x160
[ 54.915835] CPU: 3 PID: 6323 Comm: fentry Kdump: loaded Tainted: G E 6.7.0-rc2+ #35
[ 54.915839] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[ 54.915841] RIP: 0010:get_proto_defrag_hook+0x137/0x160
[ 54.915844] Code: 4f 8c e8 2c cf 68 ff 80 3d db 83 9a 01 00 0f 85 74 ff ff ff 48 89 ee 48 c7 c7 8f 12 4f 8c c6 05 c4 83 9a 01 01 e8 09 ee 5f ff <0f> 0b e9 57 ff ff ff 49 8b 3c 24 4c 63 e5 e8 36 28 6c ff 4c 89 e0
[ 54.915849] RSP: 0018:ffffb676003fbdb0 EFLAGS: 00010286
[ 54.915852] RAX: 0000000000000023 RBX: ffff9596503d5600 RCX: ffff95996fce08c8
[ 54.915854] RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff95996fce08c0
[ 54.915855] RBP: ffffffff8c4f12de R08: 0000000000000000 R09: 00000000fffeffff
[ 54.915859] R10: ffffb676003fbc70 R11: ffffffff8d363ae8 R12: 0000000000000000
[ 54.915861] R13: ffffffff8e1f75c0 R14: ffffb676003c9000 R15: 00007ffd15e78ef0
[ 54.915864] FS: 00007fb6e9cab740(0000) GS:ffff95996fcc0000(0000) knlGS:0000000000000000
[ 54.915867] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 54.915868] CR2: 00007ffd15e75c40 CR3: 0000000101e62006 CR4: 0000000000360ef0
[ 54.915870] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 54.915871] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 54.915873] Call Trace:
[ 54.915891] <TASK>
[ 54.915894] ? __warn+0x84/0x140
[ 54.915905] ? get_proto_defrag_hook+0x137/0x160
[ 54.915908] ? __report_bug+0xea/0x100
[ 54.915925] ? report_bug+0x2b/0x80
[ 54.915928] ? handle_bug+0x3c/0x70
[ 54.915939] ? exc_invalid_op+0x18/0x70
[ 54.915942] ? asm_exc_invalid_op+0x1a/0x20
[ 54.915948] ? get_proto_defrag_hook+0x137/0x160
[ 54.915950] bpf_nf_link_attach+0x1eb/0x240
[ 54.915953] link_create+0x173/0x290
[ 54.915969] __sys_bpf+0x588/0x8f0
[ 54.915974] __x64_sys_bpf+0x20/0x30
[ 54.915977] do_syscall_64+0x45/0xf0
[ 54.915989] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 54.915998] RIP: 0033:0x7fb6e9daa51d
[ 54.916001] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2b 89 0c 00 f7 d8 64 89 01 48
[ 54.916003] RSP: 002b:00007ffd15e78ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141
[ 54.916006] RAX: ffffffffffffffda RBX: 00007ffd15e78fc0 RCX: 00007fb6e9daa51d
[ 54.916007] RDX: 0000000000000040 RSI: 00007ffd15e78ef0 RDI: 000000000000001c
[ 54.916009] RBP: 000000000000002d R08: 00007fb6e9e73a60 R09: 0000000000000001
[ 54.916010] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000006
[ 54.916012] R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000
[ 54.916014] </TASK>
[ 54.916015] ---[ end trace 0000000000000000 ]---
Fixes: 91721c2d02d3 ("netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
I am leaving SUSE so the current email address <clin@suse.com> will be
disabled soon. <chester62515@gmail.com> will be my new address for handling
emails, patches and pull requests from upstream and communities.
Cc: Chester Lin <chester62515@gmail.com>
Cc: NXP S32 Linux Team <s32@nxp.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Link: https://lore.kernel.org/r/20231115234508.11510-1-clin@suse.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.7, please pull the following:
- Stefan corrects the disabling of the activity LED for the Raspberry Pi
400
* tag 'arm-soc/for-6.7/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act
Link: https://lore.kernel.org/r/20231205225021.653045-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When working on LED support for r8169 I got the following lockdep
warning. Easiest way to prevent this scenario seems to be to take
the RTNL lock before the trigger_data lock in set_device_name().
======================================================
WARNING: possible circular locking dependency detected
6.7.0-rc2-next-20231124+ #2 Not tainted
------------------------------------------------------
bash/383 is trying to acquire lock:
ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
but task is already holding lock:
ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (rtnl_mutex){+.+.}-{3:3}:
__mutex_lock+0x9b/0xb50
mutex_lock_nested+0x16/0x20
rtnl_lock+0x12/0x20
set_device_name+0xa9/0x120 [ledtrig_netdev]
netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev]
led_trigger_set+0x172/0x2c0
led_trigger_write+0xf1/0x140
sysfs_kf_bin_write+0x5d/0x80
kernfs_fop_write_iter+0x15d/0x210
vfs_write+0x1f0/0x510
ksys_write+0x6c/0xf0
__x64_sys_write+0x14/0x20
do_syscall_64+0x3f/0xf0
entry_SYSCALL_64_after_hwframe+0x6c/0x74
-> #0 (&trigger_data->lock){+.+.}-{3:3}:
__lock_acquire+0x1459/0x25a0
lock_acquire+0xc8/0x2d0
__mutex_lock+0x9b/0xb50
mutex_lock_nested+0x16/0x20
netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
call_netdevice_register_net_notifiers+0x5a/0x100
register_netdevice_notifier+0x85/0x120
netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
led_trigger_set+0x172/0x2c0
led_trigger_write+0xf1/0x140
sysfs_kf_bin_write+0x5d/0x80
kernfs_fop_write_iter+0x15d/0x210
vfs_write+0x1f0/0x510
ksys_write+0x6c/0xf0
__x64_sys_write+0x14/0x20
do_syscall_64+0x3f/0xf0
entry_SYSCALL_64_after_hwframe+0x6c/0x74
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(rtnl_mutex);
lock(&trigger_data->lock);
lock(rtnl_mutex);
lock(&trigger_data->lock);
*** DEADLOCK ***
8 locks held by bash/383:
#0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0
#1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210
#2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210
#3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140
#4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140
#5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140
#6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120
#7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20
stack backtrace:
CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2
Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023
Call Trace:
<TASK>
dump_stack_lvl+0x5c/0xd0
dump_stack+0x10/0x20
print_circular_bug+0x2dd/0x410
check_noncircular+0x131/0x150
__lock_acquire+0x1459/0x25a0
lock_acquire+0xc8/0x2d0
? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
__mutex_lock+0x9b/0xb50
? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
? __this_cpu_preempt_check+0x13/0x20
? netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
? __cancel_work_timer+0x11c/0x1b0
? __mutex_lock+0x123/0xb50
mutex_lock_nested+0x16/0x20
? mutex_lock_nested+0x16/0x20
netdev_trig_notify+0xec/0x190 [ledtrig_netdev]
call_netdevice_register_net_notifiers+0x5a/0x100
register_netdevice_notifier+0x85/0x120
netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev]
led_trigger_set+0x172/0x2c0
? preempt_count_add+0x49/0xc0
led_trigger_write+0xf1/0x140
sysfs_kf_bin_write+0x5d/0x80
kernfs_fop_write_iter+0x15d/0x210
vfs_write+0x1f0/0x510
ksys_write+0x6c/0xf0
__x64_sys_write+0x14/0x20
do_syscall_64+0x3f/0xf0
entry_SYSCALL_64_after_hwframe+0x6c/0x74
RIP: 0033:0x7f269055d034
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48
RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034
RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001
RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007
R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000
</TASK>
Fixes: d5e01266e7f5 ("leds: trigger: netdev: add additional specific link speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.7
A fix for possible truncation/overflow in the frequency computations
as both the performance value and the multiplier are 32bit values.
* tag 'scmi-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix possible frequency truncation when using level indexing mode
firmware: arm_scmi: Fix frequency truncation by promoting multiplier type
Link: https://lore.kernel.org/r/20231204134724.30465-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V Devicetree fixes for v6.7-rc4
Two fixes, both rather minor. The first fixes some dtbs_check warnings
introduced after an update to the bindings, that returns the
architecture to being clean of dtbs_check issues. The second relocates
a soc-specific property to the appropriate location in $soc.dtsi, and
hopefully avoids the same mistake being copy-pasted into more
devicetrees.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.7-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: microchip: move timebase-frequency to mpfs.dtsi
riscv: dts: sophgo: remove address-cells from intc node
Link: https://lore.kernel.org/r/20231130-maternity-majestic-dd29f0170050@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into arm/fixes
MediaTek ARM64 DeviceTree fixes for v6.7
Fixes for various MediaTek SoCs, including
MT7986: - eMMC HS400 mode failures
- Cooling trips for emergency system shutdown
- BPI-R3 machine SFP power limit and active cooling
MT8173: - EVB device tree unit_address_vs_reg warning
MT8183: - unit_address_vs_reg and simple_bus_reg warnings
- Kukui device tree nodes naming consistency and
adhering to bindings
- Jacuzzi device tree unnecessary cells removed as
those were producing avoid_unnecessary_addr_size
MT8186: - Power domains faults due to incorrect clocks
- GPU speed bin nvmem cell name was wrong, producing
issues with interpreting the speedbin with GPU OPPs
MT8195: - Local Arbiter (and whole system) ability to suspend
- Cherry device tree interrupts_property warning
...and another unit_address_vs_reg warning on MT7622.
* tag 'mtk-dts64-fixes-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: cherry: Fix interrupt cells for MT6360 on I2C7
arm64: dts: mediatek: mt8183-kukui-jacuzzi: fix dsi unnecessary cells properties
arm64: dts: mediatek: mt7622: fix memory node warning check
arm64: dts: mediatek: mt8186: fix clock names for power domains
arm64: dts: mediatek: mt8186: Change gpu speedbin nvmem cell name
arm64: dts: mt7986: change cooling trips
arm64: dts: mt7986: define 3W max power to both SFP on BPI-R3
arm64: dts: mt7986: fix emmc hs400 mode without uboot initialization
arm64: dts: mt8183: kukui: Fix underscores in node names
arm64: dts: mediatek: mt8183: Move thermal-zones to the root node
arm64: dts: mediatek: mt8173-evb: Fix regulator-fixed node names
arm64: dts: mediatek: mt8183-evb: Fix unit_address_vs_reg warning on ntc
arm64: dts: mediatek: mt8183: Fix unit address for scp reserved memory
arm64: dts: mediatek: mt8195: Fix PM suspend/resume with venc clocks
Link: https://lore.kernel.org/r/20231129113905.134732-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We need to probe for IOCP only once during boot stage, as we were probing
for IOCP for all the stages this caused the below issue during module-init
stage,
[9.019104] Unable to handle kernel paging request at virtual address ffffffff8100d3a0
[9.027153] Oops [#1]
[9.029421] Modules linked in: rcar_canfd renesas_usbhs i2c_riic can_dev spi_rspi i2c_core
[9.037686] CPU: 0 PID: 90 Comm: udevd Not tainted 6.7.0-rc1+ #57
[9.043756] Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT)
[9.050339] epc : riscv_noncoherent_supported+0x10/0x3e
[9.055558] ra : andes_errata_patch_func+0x4a/0x52
[9.060418] epc : ffffffff8000d8c2 ra : ffffffff8000d95c sp : ffffffc8003abb00
[9.067607] gp : ffffffff814e25a0 tp : ffffffd80361e540 t0 : 0000000000000000
[9.074795] t1 : 000000000900031e t2 : 0000000000000001 s0 : ffffffc8003abb20
[9.081984] s1 : ffffffff015b57c7 a0 : 0000000000000000 a1 : 0000000000000001
[9.089172] a2 : 0000000000000000 a3 : 0000000000000000 a4 : ffffffff8100d8be
[9.096360] a5 : 0000000000000001 a6 : 0000000000000001 a7 : 000000000900031e
[9.103548] s2 : ffffffff015b57d7 s3 : 0000000000000001 s4 : 000000000000031e
[9.110736] s5 : 8000000000008a45 s6 : 0000000000000500 s7 : 000000000000003f
[9.117924] s8 : ffffffc8003abd48 s9 : ffffffff015b1140 s10: ffffffff8151a1b0
[9.125113] s11: ffffffff015b1000 t3 : 0000000000000001 t4 : fefefefefefefeff
[9.132301] t5 : ffffffff015b57c7 t6 : ffffffd8b63a6000
[9.137587] status: 0000000200000120 badaddr: ffffffff8100d3a0 cause: 000000000000000f
[9.145468] [<ffffffff8000d8c2>] riscv_noncoherent_supported+0x10/0x3e
[9.151972] [<ffffffff800027e8>] _apply_alternatives+0x84/0x86
[9.157784] [<ffffffff800029be>] apply_module_alternatives+0x10/0x1a
[9.164113] [<ffffffff80008fcc>] module_finalize+0x5e/0x7a
[9.169583] [<ffffffff80085cd6>] load_module+0xfd8/0x179c
[9.174965] [<ffffffff80086630>] init_module_from_file+0x76/0xaa
[9.180948] [<ffffffff800867f6>] __riscv_sys_finit_module+0x176/0x2a8
[9.187365] [<ffffffff80889862>] do_trap_ecall_u+0xbe/0x130
[9.192922] [<ffffffff808920bc>] ret_from_exception+0x0/0x64
[9.198573] Code: 0009 b7e9 6797 014d a783 85a7 c799 4785 0717 0100 (0123) aef7
[9.205994] ---[ end trace 0000000000000000 ]---
This is because we called riscv_noncoherent_supported() for all the stages
during IOCP probe. riscv_noncoherent_supported() function sets
noncoherent_supported variable to true which has an annotation set to
"__ro_after_init" due to which we were seeing the above splat. Fix this by
probing for IOCP only once in boot stage by having a boolean variable
"done" which will be set to true upon IOCP probe in errata_probe_iocp()
and we bail out early if "done" is set to true.
While at it make return type of errata_probe_iocp() to void as we were
not checking the return value in andes_errata_patch_func().
Fixes: e021ae7f5145 ("riscv: errata: Add Andes alternative ports")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Link: https://lore.kernel.org/r/20231130212647.108746-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes
OP-TEE fix for supplicant based device enumeration
Adds a sysfs attribute for devices depending on supplicant services so
that the user-space service can detect and detach those devices before
closing the supplicant
* tag 'optee-supplicant-fix-for-v6.7' of git://git.linaro.org:/people/jens.wiklander/linux-tee:
tee: optee: Fix supplicant based device enumeration
Link: https://lore.kernel.org/r/20231114153113.GA1310615@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This fixes two bugs in SCS initialization for secondary CPUs. First,
the SCS was not initialized at all in the spinwait boot path. Second,
the code for the SBI HSM path attempted to initialize the SCS before
enabling the MMU. However, that involves dereferencing the thread
pointer, which requires the MMU to be enabled.
Fix both issues by setting up the SCS in the common secondary entry
path, after enabling the MMU.
Fixes: d1584d791a29 ("riscv: Implement Shadow Call Stack")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20231121211958.3158576-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Drop unneeded quotes over simple string values to fix a soon to be
enabled yamllint warning:
[error] string value is redundantly quoted with any quotes (quoted-strings)
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231122224414.2809184-1-robh@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The Framework Laptop 13 (AMD Ryzen 7040Series) has an ALC295 with
a disconnected or faulty headset mic presence detect similar to the
previous models. It works with the same quirk chain as
309d7363ca3d9fcdb92ff2d958be14d7e8707f68. This model has a VID:PID
of f111:0006.
Signed-off-by: Tim Bosse <flinn@timbos.se>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231206142629.388615-1-flinn@timbos.se
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is a backport of a fix that was done in OpenSBI: ec0559eb315b
("lib: sbi_misaligned_ldst: Fix handling of C.SWSP and C.SDSP").
Unlike C.LWSP/C.LDSP, these encodings can be used with the zero
register, so checking that the rs2 field is non-zero is unnecessary.
Additionally, the previous check was incorrect since it was checking
the immediate field of the instruction instead of the rs2 field.
Fixes: 956d705dd279 ("riscv: Unaligned load/store handling for M_MODE")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231103090223.702340-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
A crop of fixes for v6.7, one core fix for a merge issue and a bunch of
driver specific fixes and new IDs, mostly for x86 platforms.
|
|
MPM provides a single genpd. Allow #power-domain-cells = <0>.
Fixes: 54fc9851c0e0 ("dt-bindings: interrupt-controller: Add Qualcomm MPM support")
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231129-topic-mpmbindingspd-v2-1-acbe909ceee1@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Extensions are getting added quickly and their hwprobe bits will soon
exceed 31 (which pair values accommodate, since they're of type u64).
However, in one tree, where a bunch of extensions got merged prior to
zicboz, zicboz already got pushed to bit 32. Pushing it exposed a
32-bit compilation bug, since unsigned long was used instead of u64.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310311801.hxduISrr-lkp@intel.com/
Fixes: 9c7646d5ffd2 ("RISC-V: hwprobe: Expose Zicboz extension and its block size")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231101141908.192198-2-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Geetha sowjanya says:
====================
octeontx2-af: miscellaneous fixes
The series of patches fixes various issues related to mcs
and NIX link registers.
v3-v4:
Used FIELD_PREP macro and proper data types.
v2-v3:
Fixed typo error in patch 4 commit message.
v1-v2:
Fixed author name for patch 5.
Added Reviewed-by.
====================
Link: https://lore.kernel.org/r/20231205080434.27604-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On new silicons the TX channels for transmit level has increased.
This patch fixes the respective register offset range to
configure the newly added channels.
Fixes: b279bbb3314e ("octeontx2-af: NIX Tx scheduler queue config support")
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If mcs resources are attached to PF/VF. These resources need
to be freed on FLR. This patch add missing mcs flr call on PF FLR.
Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds the miss mcs stats register
for mcs supported platforms.
Fixes: 9312150af8da ("octeontx2-af: cn10k: mcs: Support for stats collection")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
On latest silicon versions SA cam entries increased to 256.
This patch fixes the datatype of sa_entries in mcs_hw_info
struct to u16 to hold 256 entries.
Fixes: 080bbd19c9dd ("octeontx2-af: cn10k: mcs: Add mailboxes for port related operations")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When MCS external bypass is disabled, MCS returns additional
2 credits(32B) for every packet Tx'ed on LMAC. To account for
these extra credits, NIX_AF_TX_LINKX_NORM_CREDIT.CC_MCS_CNT
needs to be configured as otherwise NIX Tx credits would overflow
and will never be returned to idle state credit count
causing issues with credit control and MTU change.
This patch fixes the same by configuring CC_MCS_CNT at probe
time for MCS enabled SoC's
Fixes: bd69476e86fc ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use opcodes available to both rv32 and rv64 in uleb128 module linking
test.
Fixes: af71bc194916 ("riscv: Add tests for riscv module loading")
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/lkml/1d7c71ee-5742-4df4-b8ef-a2aea0a624eb@infradead.org/
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20231122-module_fixup-v2-1-dfb9565e9ea5@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Dmitry Safonov says:
====================
TCP-AO fixes
Changes from v4:
- Dropped 2 patches on which there's no consensus. They will require
more work TBD if they may made acceptable. Those are:
o "net/tcp: Allow removing current/rnext TCP-AO keys on TCP_LISTEN sockets"
o "net/tcp: Store SNEs + SEQs on ao_info"
Changes from v3:
- Don't restrict adding any keys on TCP-AO connection in VRF, but only
the ones that don't match l3index (David)
Changes from v2:
- rwlocks are problematic in net code (Paolo)
Changed the SNE code to avoid spin/rw locks on RX/TX fastpath by
double-accounting SEQ numbers for TCP-AO enabled connections.
Changes from v1:
- Use tcp_can_repair_sock() helper to limit TCP_AO_REPAIR (Eric)
- Instead of hook to listen() syscall, allow removing current/rnext keys
on TCP_LISTEN (addressing Eric's objection)
- Add sne_lock to protect snd_sne/rcv_sne
- Don't move used_tcp_ao in struct tcp_request_sock (Eric)
I've been working on TCP-AO key-rotation selftests and as a result
exercised some corner-cases that are not usually met in production.
Here are a bunch of semi-related fixes:
- Documentation typo (reported by Markus Elfring)
- Proper alignment for TCP-AO option in TCP header that has MAC length
of non 4 bytes (now a selftest with randomized maclen/algorithm/etc
passes)
- 3 uAPI restricting patches that disallow more things to userspace in
order to prevent it shooting itself in any parts of the body
- SNEs READ_ONCE()/WRITE_ONCE() that went missing by my human factor
- Avoid storing MAC length from SYN header as SYN-ACK will use
rnext_key.maclen (drops an extra check that fails on new selftests)
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This extra check doesn't work for a handshake when SYN segment has
(current_key.maclen != rnext_key.maclen). It could be amended to
preserve rnext_key.maclen instead of current_key.maclen, but that
requires a lookup on listen socket.
Originally, this extra maclen check was introduced just because it was
cheap. Drop it and convert tcp_request_sock::maclen into boolean
tcp_request_sock::used_tcp_ao.
Fixes: 06b22ef29591 ("net/tcp: Wire TCP-AO to request sockets")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If the connection was established, don't allow adding TCP-AO keys that
don't match the peer. Currently, there are checks for ip-address
matching, but L3 index check is missing. Add it to restrict userspace
shooting itself somewhere.
Yet, nothing restricts the CAP_NET_RAW user from trying to shoot
themselves by performing setsockopt(SO_BINDTODEVICE) or
setsockopt(SO_BINDTOIFINDEX) over an established TCP-AO connection.
So, this is just "minimum effort" to potentially save someone's
debugging time, rather than a full restriction on doing weird things.
Fixes: 248411b8cb89 ("net/tcp: Wire up l3index to TCP-AO")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Listen socket is not an established TCP connection, so
setsockopt(TCP_AO_REPAIR) doesn't have any impact.
Restrict this uAPI for listen sockets.
Fixes: faadfaba5e01 ("net/tcp: Add TCP_AO_REPAIR")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently functions that pre-calculate TCP header options length use
unaligned TCP-AO header + MAC-length for skb reservation.
And the functions that actually write TCP-AO options into skb do align
the header. Nothing good can come out of this for ((maclen % 4) != 0).
Provide tcp_ao_len_aligned() helper and use it everywhere for TCP
header options space calculations.
Fixes: 1e03d32bea8e ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Yep, my VIM spellchecker is not good enough for typos like this one.
Fixes: 7fe0e38bb669 ("Documentation/tcp: Add TCP-AO documentation")
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reported-by: Markus Elfring <Markus.Elfring@web.de>
Closes: https://lore.kernel.org/all/2745ab4e-acac-40d4-83bf-37f2600d0c3d@web.de/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS ethernet driver
There are some bugfix for the HNS ethernet driver
---
changeLog:
v2 -> v3:
- Refine the commit msg as Wojciech suggestions
- Reconstruct the "hns_mac_link_anti_shake" function suggested by Wojciech
v2: https://lore.kernel.org/all/20231204011051.4055031-1-shaojijie@huawei.com/
v1 -> v2:
- Fixed the internal function is not decorated with static issue, suggested by Jakub
v1: https://lore.kernel.org/all/20231201102703.4134592-1-shaojijie@huawei.com/
---
====================
Link: https://lore.kernel.org/r/20231204143232.3221542-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If a xge port just connect with an optical module and no fiber,
it may have a fake link up because there may be interference on
the hardware. This patch adds an anti-shake to avoid the problem.
And the time of anti-shake is base on tests.
Fixes: b917078c1c10 ("net: hns: Add ACPI support to check SFP present")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Upon changing the tx feature, the hns driver will modify the
maybe_stop_tx() and fill_desc() functions, if the modify happens
during packet sending, will cause the hardware and software
pointers do not match, and the port can not work anymore.
This patch deletes the maybe_stop_tx() and fill_desc() functions
modification when setting tx feature, and use the skb_is_gro()
to determine which functions to use in the tx path.
Fixes: 38f616da1c28 ("net:hns: Add support of ethtool TSO set option for Hip06 in HNS")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
If is_ptp_ring == true in the loop of __aq_ring_xdp_clean function,
then a timestamp is stored from a packet in a field of skb object,
which is not allocated at the moment of the call (skb == NULL).
Generalize aq_ptp_extract_ts and other affected functions so they don't
work with struct sk_buff*, but with struct skb_shared_hwtstamps*.
Found by Linux Verification Center (linuxtesting.org) with SVACE
Fixes: 26efaef759a1 ("net: atlantic: Implement xdp data plane")
Signed-off-by: Daniil Maximov <daniil31415it@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://lore.kernel.org/r/20231204085810.1681386-1-daniil31415it@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Invoke drm_plane_helper_funcs.end_fb_access before
drm_atomic_helper_commit_hw_done(). The latter function hands over
ownership of the plane state to the following commit, which might
free it. Releasing resources in end_fb_access then operates on undefined
state. This bug has been observed with non-blocking commits when they
are being queued up quickly.
Here is an example stack trace from the bug report. The plane state has
been free'd already, so the pages for drm_gem_fb_vunmap() are gone.
Unable to handle kernel paging request at virtual address 0000000100000049
[...]
drm_gem_fb_vunmap+0x18/0x74
drm_gem_end_shadow_fb_access+0x1c/0x2c
drm_atomic_helper_cleanup_planes+0x58/0xd8
drm_atomic_helper_commit_tail+0x90/0xa0
commit_tail+0x15c/0x188
commit_work+0x14/0x20
Fix this by running end_fb_access immediately after updating all planes
in drm_atomic_helper_commit_planes(). The existing clean-up helper
drm_atomic_helper_cleanup_planes() now only handles cleanup_fb.
For aborted commits, roll back from drm_atomic_helper_prepare_planes()
in the new helper drm_atomic_helper_unprepare_planes(). This case is
different from regular cleanup, as we have to release the new state;
regular cleanup releases the old state. The new helper also invokes
cleanup_fb for all planes.
The changes mostly involve DRM's atomic helpers. Only two drivers, i915
and nouveau, implement their own commit function. Update them to invoke
drm_atomic_helper_unprepare_planes(). Drivers with custom commit_tail
function do not require changes.
v4:
* fix documentation (kernel test robot)
v3:
* add drm_atomic_helper_unprepare_planes() for rolling back
* use correct state for end_fb_access
v2:
* fix test in drm_atomic_helper_cleanup_planes()
Reported-by: Alyssa Ross <hi@alyssa.is>
Closes: https://lore.kernel.org/dri-devel/87leazm0ya.fsf@alyssa.is/
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Fixes: 94d879eaf7fb ("drm/atomic-helper: Add {begin,end}_fb_access to plane helpers")
Tested-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.2+
Link: https://patchwork.freedesktop.org/patch/msgid/20231204083247.22006-1-tzimmermann@suse.de
|
|
The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Kelly Kane <kelly@hawknetworks.com>
Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
JEDEC standard JESD84-B51 defines the eMMC Data Strobe line, which is
currently used only in HS400 mode, as a device->host clock signal that
"is used only in read operation. The Data Strobe is always High-Z (not
driven by the device and pulled down by RDS) or Driven Low in write
operation, except during CRC status response." RDS is a pull-down
resistor specified in the 10K-100K ohm range. Thus per the standard, the
Data Strobe is always pulled to ground (by the eMMC and/or RDS) during
write operations.
Evidently, the eMMC host controller in the RK3588 considers an active
voltage on the eMMC-DS line during a write to be an error.
The default (i.e. hardware reset, and Rockchip BSP) behavior for the
RK3588 is to activate the eMMC-DS pin's builtin pull-down. As a result,
many RK3588 board designers do not bother adding a dedicated RDS
resistor, instead relying on the RK3588's internal bias. The current
devicetree, however, disables this bias (`pcfg_pull_none`), breaking
HS400-mode writes for boards without a dedicated RDS, but with an eMMC
chip that chooses to High-Z (instead of drive-low) the eMMC-DS line.
(The Turing RK1 is one such board.)
Fix this by changing the bias in the (common) emmc_data_strobe case to
reflect the expected hardware/BSP behavior. This is unlikely to cause
regressions elsewhere: the pull-down is only relevant for High-Z eMMCs,
and if this is redundant with a (dedicated) RDS resistor, the effective
result is only a lower resistance to ground -- where the range of
tolerance is quite high. If it does, it's better fixed in the specific
devicetrees.
Fixes: d85f8a5c798d5 ("arm64: dts: rockchip: Add rk3588 pinctrl data")
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231205202900.4617-2-CFSworks@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Per root-node.yaml, 'model' is a required property.
Pass it to fix the following dt-schema warning:
imx28-xea.dtb: /: 'model' is a required property
from schema $id: http://devicetree.org/schemas/root-node.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Fixes: 445ae16ac1c5 ("ARM: dts: imx28: Add DTS description of imx28 based XEA board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns
true. For example, applications can use PF_PACKET to create a malformed
packet with no IP header. This type of packet causes a problem such as
uninit-value access.
This patch ensures that skb_pull() can pull the required size by checking
the skb with pskb_network_may_pull() before skb_pull().
Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The pcm state can be SNDRV_PCM_STATE_DISCONNECTED at disconnect
callback, and there is not an entry of SNDRV_PCM_STATE_DISCONNECTED
in snd_pcm_state_names.
This patch adds the missing entry to resolve this issue.
cat /proc/asound/card2/pcm0p/sub0/status
That results in stack traces like the following:
[ 99.702732][ T5171] Unexpected kernel BRK exception at EL1
[ 99.702774][ T5171] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP
[ 99.703858][ T5171] Modules linked in: bcmdhd(E) (...)
[ 99.747425][ T5171] CPU: 3 PID: 5171 Comm: cat Tainted: G C OE 5.10.189-android13-4-00003-g4a17384380d8-ab11086999 #1
[ 99.748447][ T5171] Hardware name: Rockchip RK3588 CVTE V10 Board (DT)
[ 99.749024][ T5171] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 99.749616][ T5171] pc : snd_pcm_substream_proc_status_read+0x264/0x2bc
[ 99.750204][ T5171] lr : snd_pcm_substream_proc_status_read+0xa4/0x2bc
[ 99.750778][ T5171] sp : ffffffc0175abae0
[ 99.751132][ T5171] x29: ffffffc0175abb80 x28: ffffffc009a2c498
[ 99.751665][ T5171] x27: 0000000000000001 x26: ffffff810cbae6e8
[ 99.752199][ T5171] x25: 0000000000400cc0 x24: ffffffc0175abc60
[ 99.752729][ T5171] x23: 0000000000000000 x22: ffffff802f558400
[ 99.753263][ T5171] x21: ffffff81d8d8ff00 x20: ffffff81020cdc00
[ 99.753795][ T5171] x19: ffffff802d110000 x18: ffffffc014fbd058
[ 99.754326][ T5171] x17: 0000000000000000 x16: 0000000000000000
[ 99.754861][ T5171] x15: 000000000000c276 x14: ffffffff9a976fda
[ 99.755392][ T5171] x13: 0000000065689089 x12: 000000000000d72e
[ 99.755923][ T5171] x11: ffffff802d110000 x10: 00000000000000e0
[ 99.756457][ T5171] x9 : 9c431600c8385d00 x8 : 0000000000000008
[ 99.756990][ T5171] x7 : 0000000000000000 x6 : 000000000000003f
[ 99.757522][ T5171] x5 : 0000000000000040 x4 : ffffffc0175abb70
[ 99.758056][ T5171] x3 : 0000000000000001 x2 : 0000000000000001
[ 99.758588][ T5171] x1 : 0000000000000000 x0 : 0000000000000000
[ 99.759123][ T5171] Call trace:
[ 99.759404][ T5171] snd_pcm_substream_proc_status_read+0x264/0x2bc
[ 99.759958][ T5171] snd_info_seq_show+0x54/0xa4
[ 99.760370][ T5171] seq_read_iter+0x19c/0x7d4
[ 99.760770][ T5171] seq_read+0xf0/0x128
[ 99.761117][ T5171] proc_reg_read+0x100/0x1f8
[ 99.761515][ T5171] vfs_read+0xf4/0x354
[ 99.761869][ T5171] ksys_read+0x7c/0x148
[ 99.762226][ T5171] __arm64_sys_read+0x20/0x30
[ 99.762625][ T5171] el0_svc_common+0xd0/0x1e4
[ 99.763023][ T5171] el0_svc+0x28/0x98
[ 99.763358][ T5171] el0_sync_handler+0x8c/0xf0
[ 99.763759][ T5171] el0_sync+0x1b8/0x1c0
[ 99.764118][ T5171] Code: d65f03c0 b9406102 17ffffae 94191565 (d42aa240)
[ 99.764715][ T5171] ---[ end trace 1eeffa3e17c58e10 ]---
[ 99.780720][ T5171] Kernel panic - not syncing: BRK handler: Fatal exception
Signed-off-by: Jason Zhang <jason.zhang@rock-chips.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231206013139.20506-1-jason.zhang@rock-chips.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The timer nodes declare compatibility with "fsl,imx6sx-gpt", which
itself is compatible with "fsl,imx6dl-gpt". Switch the fallback
compatible from "fsl,imx6sx-gpt" to "fsl,imx6dl-gpt".
Fixes: 949673450291 ("ARM: dts: add imx7d soc dtsi file")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The MAINTAINERS entry's F: currently only matches the 32-bit device trees,
as commit 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
inadvertently dropped the 64-bit DT match when it added the 32 bit
matches. The entry has a N: imx, which reduced the impact a bit, but
still some board device trees may not contain the substring and would
thus not be covered by the entry.
Reinstate the missing F: line to restore previous behavior.
Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Make sure that the wifi regulator is always on. The wifi driver itself
puts the wifi module into suspend mode. If we cut the power the driver
will crash when resuming from suspend.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: ad0de4ceb706 ("arm64: dts: freescale: add initial apalis imx8 aka quadmax module support")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Release the id allocated in 'mmdc_pmu_init' when 'devm_kasprintf'
return NULL
Suggested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Fixes: e76bdfd7403a ("ARM: imx: Added perf functionality to mmdc driver")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Change the gpio node name to align with register address.
Fixes: ac7bcf48ddba ("arm64: dts: imx8ulp: update gpio node")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Change the gpio node name to align with register address
Fixes: c1d0782b5fc3 ("arm64: dts: imx93: update gpio node")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|