Kernel driver hih6130¶
Honeywell HIH-6130 / HIH-6131
Addresses scanned: none
Datasheet: Publicly available at the Honeywell website
- Iain Paton <email@example.com>
The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package. The difference between the two devices is that the HIH-6131 has a condensation filter.
The devices communicate with the I2C protocol. All sensors are set to the same I2C address 0x27 by default, so an entry with I2C_BOARD_INFO(“hih6130”, 0x27) can be used in the board setup code.
Please see Documentation/i2c/instantiating-devices.rst for details on how to instantiate I2C devices.
- temperature input
- humidity input
Command mode and alarms are not currently supported.