Kernel driver hih6130 ===================== Supported chips: * Honeywell HIH-6130 / HIH-6131 Prefix: 'hih6130' Addresses scanned: none Datasheet: Publicly available at the Honeywell website http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872 Author: Iain Paton Description ----------- The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package. The difference between the two devices is that the HIH-6131 has a condensation filter. The devices communicate with the I2C protocol. All sensors are set to the same I2C address 0x27 by default, so an entry with I2C_BOARD_INFO("hih6130", 0x27) can be used in the board setup code. Please see Documentation/i2c/instantiating-devices.rst for details on how to instantiate I2C devices. sysfs-Interface --------------- temp1_input temperature input humidity1_input humidity input Notes ----- Command mode and alarms are not currently supported.