Kernel driver w83l785ts¶
Addresses scanned: I2C 0x2e
Datasheet: Publicly available at the Winbond USA website
- Jean Delvare <firstname.lastname@example.org>
The W83L785TS-S is a digital temperature sensor. It senses the temperature of a single external diode. The high limit is theoretically defined as 85 or 100 degrees C through a combination of external resistors, so the user cannot change it. Values seen so far suggest that the two possible limits are actually 95 and 110 degrees C. The datasheet is rather poor and obviously inaccurate on several points including this one.
All temperature values are given in degrees Celsius. Resolution is 1.0 degree. See the datasheet for details.
The w83l785ts driver will not update its values more frequently than every other second; reading them more often will do no harm, but will return ‘old’ values.
On some systems (Asus), the BIOS is known to interfere with the driver and cause read errors. Or maybe the W83L785TS-S chip is simply unreliable, we don’t really know. The driver will retry a given number of times (5 by default) and then give up, returning the old value (or 0 if there is no old value). It seems to work well enough so that you should not notice anything. Thanks to James Bolt for helping test this feature.