| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes and new device ids
for 6.9-rc7 that resolve some reported problems.
Included in here are:
- iio driver fixes
- mei driver fix and new device ids
- dyndbg bugfix
- pvpanic-pci driver bugfix
- slimbus driver bugfix
- fpga new device id
All have been in linux-next with no reported problems"
* tag 'char-misc-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom-ngd-ctrl: Add timeout for wait operation
dyndbg: fix old BUG_ON in >control parser
misc/pvpanic-pci: register attributes via pci_driver
fpga: dfl-pci: add PCI subdevice ID for Intel D5005 card
mei: me: add lunar lake point M DID
mei: pxp: match against PCI_CLASS_DISPLAY_OTHER
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
|
|
Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't
really look), lets make sure by removing it, doing pr_err and return
-EINVAL instead.
Cc: stable <stable@kernel.org>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20240429193145.66543-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-26
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 14 files changed, 168 insertions(+), 72 deletions(-).
The main changes are:
1) Fix BPF_PROBE_MEM in verifier and JIT to skip loads from vsyscall page,
from Puranjay Mohan.
2) Fix a crash in XDP with devmap broadcast redirect when the latter map
is in process of being torn down, from Toke Høiland-Jørgensen.
3) Fix arm64 and riscv64 BPF JITs to properly clear start time for BPF
program runtime stats, from Xu Kuohai.
4) Fix a sockmap KCSAN-reported data race in sk_psock_skb_ingress_enqueue,
from Jason Xing.
5) Fix BPF verifier error message in resolve_pseudo_ldimm64,
from Anton Protopopov.
6) Fix missing DEBUG_INFO_BTF_MODULES Kconfig menu item,
from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test PROBE_MEM of VSYSCALL_ADDR on x86-64
bpf, x86: Fix PROBE_MEM runtime load check
bpf: verifier: prevent userspace memory access
xdp: use flags field to disambiguate broadcast redirect
arm32, bpf: Reimplement sign-extension mov instruction
riscv, bpf: Fix incorrect runtime stats
bpf, arm64: Fix incorrect runtime stats
bpf: Fix a verifier verbose message
bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue
MAINTAINERS: bpf: Add Lehui and Puranjay as riscv64 reviewers
MAINTAINERS: Update email address for Puranjay Mohan
bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition
====================
Link: https://lore.kernel.org/r/20240426224248.26197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over"
* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
stackdepot: respect __GFP_NOLOCKDEP allocation flag
hugetlb: check for anon_vma prior to folio allocation
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
mm: turn folio_test_hugetlb into a PageType
mm: support page_mapcount() on page_has_type() pages
mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
selftests: mm: fix unused and uninitialized variable warning
selftests/harness: remove use of LINE_MAX
|
|
Fix extract_user_to_sg() so that it will break out of the loop if
iov_iter_extract_pages() returns 0 rather than looping around forever.
[Note that I've included two fixes lines as the function got moved to a
different file and renamed]
Fixes: 85dd2c8ff368 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator")
Fixes: f5f82cd18732 ("Move netfs_extract_iter_to_sg() to lib/scatterlist.c")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: Steve French <sfrench@samba.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: netfs@lists.linux.dev
Link: https://lore.kernel.org/r/1967121.1714034372@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If stack_depot_save_flags() allocates memory it always drops
__GFP_NOLOCKDEP flag. So when KASAN tries to track __GFP_NOLOCKDEP
allocation we may end up with lockdep splat like bellow:
======================================================
WARNING: possible circular locking dependency detected
6.9.0-rc3+ #49 Not tainted
------------------------------------------------------
kswapd0/149 is trying to acquire lock:
ffff88811346a920
(&xfs_nondir_ilock_class){++++}-{4:4}, at: xfs_reclaim_inode+0x3ac/0x590
[xfs]
but task is already holding lock:
ffffffff8bb33100 (fs_reclaim){+.+.}-{0:0}, at:
balance_pgdat+0x5d9/0xad0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x7da/0x1030
lock_acquire+0x15d/0x400
fs_reclaim_acquire+0xb5/0x100
prepare_alloc_pages.constprop.0+0xc5/0x230
__alloc_pages+0x12a/0x3f0
alloc_pages_mpol+0x175/0x340
stack_depot_save_flags+0x4c5/0x510
kasan_save_stack+0x30/0x40
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x83/0x90
kmem_cache_alloc+0x15e/0x4a0
__alloc_object+0x35/0x370
__create_object+0x22/0x90
__kmalloc_node_track_caller+0x477/0x5b0
krealloc+0x5f/0x110
xfs_iext_insert_raw+0x4b2/0x6e0 [xfs]
xfs_iext_insert+0x2e/0x130 [xfs]
xfs_iread_bmbt_block+0x1a9/0x4d0 [xfs]
xfs_btree_visit_block+0xfb/0x290 [xfs]
xfs_btree_visit_blocks+0x215/0x2c0 [xfs]
xfs_iread_extents+0x1a2/0x2e0 [xfs]
xfs_buffered_write_iomap_begin+0x376/0x10a0 [xfs]
iomap_iter+0x1d1/0x2d0
iomap_file_buffered_write+0x120/0x1a0
xfs_file_buffered_write+0x128/0x4b0 [xfs]
vfs_write+0x675/0x890
ksys_write+0xc3/0x160
do_syscall_64+0x94/0x170
entry_SYSCALL_64_after_hwframe+0x71/0x79
Always preserve __GFP_NOLOCKDEP to fix this.
Link: https://lkml.kernel.org/r/20240418141133.22950-1-ryabinin.a.a@gmail.com
Fixes: cd11016e5f52 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reported-by: Xiubo Li <xiubli@redhat.com>
Closes: https://lore.kernel.org/all/a0caa289-ca02-48eb-9bf2-d86fd47b71f4@redhat.com/
Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Closes: https://lore.kernel.org/all/f9ff999a-e170-b66b-7caf-293f2b147ac2@opensource.wdc.com/
Suggested-by: Dave Chinner <david@fromorbit.com>
Tested-by: Xiubo Li <xiubli@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Correctly disable UBSAN configs in configs/hardening (Nathan
Chancellor)
- Add missing signed integer overflow trap types to arm64 handler
* tag 'hardening-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ubsan: Add awareness of signed integer overflow traps
configs/hardening: Disable CONFIG_UBSAN_SIGNED_WRAP
configs/hardening: Fix disabling UBSAN configurations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig fixes from Masami Hiramatsu:
- Fix potential static_command_line buffer overrun.
Currently we allocate the memory for static_command_line based on
"boot_command_line", but it will copy "command_line" into it. So we
use the length of "command_line" instead of "boot_command_line" (as
we previously did)
- Use memblock_free_late() in xbc_exit() instead of memblock_free()
after the buddy system is initialized
- Fix a kerneldoc warning
* tag 'bootconfig-fixes-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Fix the kerneldoc of _xbc_exit()
bootconfig: use memblock_free_late to free xbc memory to buddy
init/main.c: Fix potential static_command_line memory overflow
|
|
Fix the kerneldoc of _xbc_exit() which is updated to have an @early
argument and the function name is changed.
Link: https://lore.kernel.org/all/171321744474.599864.13532445969528690358.stgit@devnote2/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404150036.kPJ3HEFA-lkp@intel.com/
Fixes: 89f9a1e876b5 ("bootconfig: use memblock_free_late to free xbc memory to buddy")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
On arm64, UBSAN traps can be decoded from the trap instruction. Add the
add, sub, and mul overflow trap codes now that CONFIG_UBSAN_SIGNED_WRAP
exists. Seen under clang 19:
Internal error: UBSAN: unrecognized failure code: 00000000f2005515 [#1] PREEMPT SMP
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/lkml/20240411-fix-ubsan-in-hardening-config-v1-0-e0177c80ffaa@kernel.org
Fixes: 557f8c582a9b ("ubsan: Reintroduce signed overflow sanitizer")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240415182832.work.932-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
On the time to free xbc memory in xbc_exit(), memblock may has handed
over memory to buddy allocator. So it doesn't make sense to free memory
back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs
on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86.
Following KASAN logs shows this case.
This patch fixes the xbc memory free problem by calling memblock_free()
in early xbc init error rewind path and calling memblock_free_late() in
xbc exit path to free memory to buddy allocator.
[ 9.410890] ==================================================================
[ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260
[ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1
[ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 #5
[ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023
[ 9.460789] Call Trace:
[ 9.463518] <TASK>
[ 9.465859] dump_stack_lvl+0x53/0x70
[ 9.469949] print_report+0xce/0x610
[ 9.473944] ? __virt_addr_valid+0xf5/0x1b0
[ 9.478619] ? memblock_isolate_range+0x12d/0x260
[ 9.483877] kasan_report+0xc6/0x100
[ 9.487870] ? memblock_isolate_range+0x12d/0x260
[ 9.493125] memblock_isolate_range+0x12d/0x260
[ 9.498187] memblock_phys_free+0xb4/0x160
[ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10
[ 9.508021] ? mutex_unlock+0x7e/0xd0
[ 9.512111] ? __pfx_mutex_unlock+0x10/0x10
[ 9.516786] ? kernel_init_freeable+0x2d4/0x430
[ 9.521850] ? __pfx_kernel_init+0x10/0x10
[ 9.526426] xbc_exit+0x17/0x70
[ 9.529935] kernel_init+0x38/0x1e0
[ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30
[ 9.538601] ret_from_fork+0x2c/0x50
[ 9.542596] ? __pfx_kernel_init+0x10/0x10
[ 9.547170] ret_from_fork_asm+0x1a/0x30
[ 9.551552] </TASK>
[ 9.555649] The buggy address belongs to the physical page:
[ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30
[ 9.570821] flags: 0x200000000000000(node=0|zone=2)
[ 9.576271] page_type: 0xffffffff()
[ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000
[ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
[ 9.597476] page dumped because: kasan: bad access detected
[ 9.605362] Memory state around the buggy address:
[ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.634930] ^
[ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.654675] ==================================================================
Link: https://lore.kernel.org/all/20240414114944.1012359-1-qiang4.zhang@linux.intel.com/
Fixes: 40caa127f3c7 ("init: bootconfig: Remove all bootconfig data when the init memory is removed")
Cc: Stable@vger.kernel.org
Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth.
Current release - new code bugs:
- netfilter: complete validation of user input
- mlx5: disallow SRIOV switchdev mode when in multi-PF netdev
Previous releases - regressions:
- core: fix u64_stats_init() for lockdep when used repeatedly in one
file
- ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr
- bluetooth: fix memory leak in hci_req_sync_complete()
- batman-adv: avoid infinite loop trying to resize local TT
- drv: geneve: fix header validation in geneve[6]_xmit_skb
- drv: bnxt_en: fix possible memory leak in
bnxt_rdma_aux_device_init()
- drv: mlx5: offset comp irq index in name by one
- drv: ena: avoid double-free clearing stale tx_info->xdpf value
- drv: pds_core: fix pdsc_check_pci_health deadlock
Previous releases - always broken:
- xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING
- bluetooth: fix setsockopt not validating user input
- af_unix: clear stale u->oob_skb.
- nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies
- drv: virtio_net: fix guest hangup on invalid RSS update
- drv: mlx5e: Fix mlx5e_priv_init() cleanup flow
- dsa: mt7530: trap link-local frames regardless of ST Port State"
* tag 'net-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: ena: Set tx_info->xdpf value to NULL
net: ena: Fix incorrect descriptor free behavior
net: ena: Wrong missing IO completions check order
net: ena: Fix potential sign extension issue
af_unix: Fix garbage collector racing against connect()
net: dsa: mt7530: trap link-local frames regardless of ST Port State
Revert "s390/ism: fix receive message buffer allocation"
net: sparx5: fix wrong config being used when reconfiguring PCS
net/mlx5: fix possible stack overflows
net/mlx5: Disallow SRIOV switchdev mode when in multi-PF netdev
net/mlx5e: RSS, Block XOR hash with over 128 channels
net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmit
net/mlx5e: HTB, Fix inconsistencies with QoS SQs number
net/mlx5e: Fix mlx5e_priv_init() cleanup flow
net/mlx5e: RSS, Block changing channels number when RXFH is configured
net/mlx5: Correctly compare pkt reformat ids
net/mlx5: Properly link new fs rules into the tree
net/mlx5: offset comp irq index in name by one
net/mlx5: Register devlink first under devlink lock
net/mlx5: E-switch, store eswitch pointer before registering devlink_param
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- gcc-plugins/stackleak: Avoid .head.text section (Ard Biesheuvel)
- ubsan: fix unused variable warning in test module (Arnd Bergmann)
- Improve entropy diffusion in randomize_kstack
* tag 'hardening-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randomize_kstack: Improve entropy diffusion
ubsan: fix unused variable warning in test module
gcc-plugins/stackleak: Avoid .head.text section
|
|
When CONFIG_NET is disabled, an extra warning shows up for this
unused variable:
lib/checksum_kunit.c:218:18: error: 'expected_csum_ipv6_magic' defined but not used [-Werror=unused-const-variable=]
Replace the #ifdef with an IS_ENABLED() check that makes the compiler's
dead-code-elimination take care of the link failure.
Fixes: f24a70106dc1 ("lib: checksum: Fix build with CONFIG_NET=n")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 3ee34eabac2a ("lib/stackdepot: fix first entry having a 0-handle")
changed the meaning of the pool_index field to mean "the pool index plus
1". This made the code accessing this field less self-documenting, as
well as causing debuggers such as drgn to not be able to easily remain
compatible with both old and new kernels, because they typically do that
by testing for presence of the new field. Because stackdepot is a
debugging tool, we should make sure that it is debugger friendly.
Therefore, give the field a different name to improve readability as well
as enabling debugger backwards compatibility.
This is needed in 6.9, which would otherwise become an odd release with
the new semantics and old name so debuggers wouldn't recognize the new
semantics there.
Fixes: 3ee34eabac2a ("lib/stackdepot: fix first entry having a 0-handle")
Link: https://lkml.kernel.org/r/20240402001500.53533-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/Ib3e70c36c1d230dd0a118dc22649b33e768b9f88
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Turns out that due to CONFIG_DEBUG_INFO_BTF_MODULES not having an
explicitly specified "menu item name" in Kconfig, it's basically
impossible to turn it off (see [0]).
This patch fixes the issue by defining menu name for
CONFIG_DEBUG_INFO_BTF_MODULES, which makes it actually adjustable
and independent of CONFIG_DEBUG_INFO_BTF, in the sense that one can
have DEBUG_INFO_BTF=y and DEBUG_INFO_BTF_MODULES=n.
We still keep it as defaulting to Y, of course.
Fixes: 5f9ae91f7c0d ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it")
Reported-by: Vincent Li <vincent.mc.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAK3+h2xiFfzQ9UXf56nrRRP=p1+iUxGoEP5B+aq9MDT5jLXDSg@mail.gmail.com [0]
Link: https://lore.kernel.org/bpf/20240404220344.3879270-1-andrii@kernel.org
|
|
This is one of the drivers with an unused variable that is marked 'const'.
Adding a __used annotation here avoids the warning and lets us enable
the option by default:
lib/test_ubsan.c:137:28: error: unused variable 'skip_ubsan_array' [-Werror,-Wunused-const-variable]
Fixes: 4a26f49b7b3d ("ubsan: expand tests and reporting")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-3-arnd@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more hardening updates from Kees Cook:
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
* tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/bugs: Improve warning message for compilers without counted_by support
overflow: Change DEFINE_FLEX to take __counted_by member
Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST"
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
ubsan: Disable signed integer overflow sanitizer on GCC < 8
|
|
The norm should be flexible array structures with __counted_by
annotations, so DEFINE_FLEX() is updated to expect that. Rename
the non-annotated version to DEFINE_RAW_FLEX(), and update the
few existing users. Additionally add selftests for the macros.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- Allow console fonts up to 64x128 pixels (Samuel Thibault)
- Prevent division-by-zero in fb monitor code (Roman Smirnov)
- Drop Renesas ARM platforms from Mobile LCDC framebuffer driver (Geert
Uytterhoeven)
- Various code cleanups in viafb, uveafb and mb862xxfb drivers by
Aleksandr Burakov, Li Zhijian and Michael Ellerman
* tag 'fbdev-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: panel-tpo-td043mtea1: Convert sprintf() to sysfs_emit()
fbmon: prevent division by zero in fb_videomode_from_videomode()
fbcon: Increase maximum font width x height to 64 x 128
fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2
fbdev: mb862xxfb: Fix defined but not used error
fbdev: uvesafb: Convert sprintf/snprintf to sysfs_emit
fbdev: Restrict FB_SH_MOBILE_LCDC to SuperH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core and kernfs changes for 6.9-rc1.
Nothing all that crazy here, just some good updates that include:
- automatic attribute group hiding from Dan Williams (he fixed up my
horrible attempt at doing this.)
- kobject lock contention fixes from Eric Dumazet
- driver core cleanups from Andy
- kernfs rcu work from Tejun
- fw_devlink changes to resolve some reported issues
- other minor changes, all details in the shortlog
All of these have been in linux-next for a long time with no reported
issues"
* tag 'driver-core-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
device: core: Log warning for devices pending deferred probe on timeout
driver: core: Use dev_* instead of pr_* so device metadata is added
driver: core: Log probe failure as error and with device metadata
of: property: fw_devlink: Add support for "post-init-providers" property
driver core: Add FWLINK_FLAG_IGNORE to completely ignore a fwnode link
driver core: Adds flags param to fwnode_link_add()
debugfs: fix wait/cancellation handling during remove
device property: Don't use "proxy" headers
device property: Move enum dev_dma_attr to fwnode.h
driver core: Move fw_devlink stuff to where it belongs
driver core: Drop unneeded 'extern' keyword in fwnode.h
firmware_loader: Suppress warning on FW_OPT_NO_WARN flag
sysfs:Addresses documentation in sysfs_merge_group and sysfs_unmerge_group.
firmware_loader: introduce __free() cleanup hanler
platform-msi: Remove usage of the deprecated ida_simple_xx() API
sysfs: Introduce DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE()
sysfs: Document new "group visible" helpers
sysfs: Fix crash on empty group attributes array
sysfs: Introduce a mechanism to hide static attribute_groups
sysfs: Introduce a mechanism to hide static attribute_groups
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
|
|
This reverts commit 4acf1de35f41549e60c3c02a8defa7cb95eabdf2.
Commit d055c6a2cc16 ("kunit: memcpy: Mark tests as slow using test
attributes") marks slow memcpy unit tests as slow. Since this commit,
the tests can be disabled with a module parameter, and the configuration
option to skip the slow tests is no longer needed. Revert the patch
introducing it.
Cc: David Gow <davidgow@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240314151200.2285314-1-linux@roeck-us.net
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
For opting functions out of sanitizer coverage, the "no_sanitize"
attribute is used, but in GCC this wasn't introduced until GCC 8.
Disable the sanitizer unless we're not using GCC, or it is GCC
version 8 or higher.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403110643.27JXEVCI-lkp@intel.com/
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Pull CXL updates from Dan Williams:
"CXL has mechanisms to enumerate the performance characteristics of
memory devices. Those mechanisms allow Linux to build the equivalent
of ACPI SRAT, SLIT, and HMAT tables dynamically at runtime. That
capability is necessary because static ACPI can not represent dynamic
CXL configurations (and reconfigurations).
So, building on the v6.8 work to add "Quality of Service" enumeration,
this update plumbs CXL "access coordinates" (read/write access latency
and bandwidth) in all the same places that ACPI HMAT feeds similar
data. Follow-on patches from the -mm side can then use that data to
feed mechanisms like mm/memory-tiers.c. Greg has acked the touch to
drivers/base/.
The other feature update this cycle is support for CXL error injection
via the ACPI EINJ module. That facility enables injection of bus
protocol errors provided the user knows the magic address values to
insert in the interface. To hide that magic, and make this easier to
use, new error injection attributes were added to CXL debugfs. That
interface injects the errors relative to a CXL object rather than
require user tooling to know how to lookup and inject RCRB (Root
Complex Register Block) addresses into the raw EINJ debugfs interface.
It received some helpful review comments from Tony, but no explicit
acks from the ACPI side. The primary user visible change for existing
EINJ users is that they may find that einj.ko was already loaded by
cxl_core.ko. Previously, einj.ko was only loaded on demand.
The usual collection of miscellaneous cleanups are also present this
cycle.
Summary:
- Supplement ACPI HMAT reported memory performance with native CXL
memory performance enumeration
- Add support for CXL error injection via the ACPI EINJ mechanism
- Cleanup CXL DOE and CDAT integration
- Miscellaneous cleanups and fixes"
* tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation"
lib/firmware_table: Provide buffer length argument to cdat_table_parse()
cxl/pci: Get rid of pointer arithmetic reading CDAT table
cxl/pci: Rename DOE mailbox handle to doe_mb
cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location
cxl/core: Add CXL EINJ debugfs files
EINJ, Documentation: Update EINJ kernel doc
EINJ: Add CXL error type support
EINJ: Migrate to a platform driver
cxl/region: Deal with numa nodes not enumerated by SRAT
cxl/region: Add memory hotplug notifier for cxl region
cxl/region: Add sysfs attribute for locality attributes of CXL regions
cxl/region: Calculate performance data for a region
cxl: Set cxlmd->endpoint before adding port device
cxl: Move QoS class to be calculated from the nearest CPU
cxl: Split out host bridge access coordinates
cxl: Split out combine_coordinates() for common shared usage
ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes
ACPI: HMAT: Introduce 2 levels of generic port access class
base/node / ACPI: Enumerate node access class for 'struct access_coordinate'
...
|
|
By using bitmaps we actually support whatever size we would want, but
the console currently limits fonts to 64x128 (which gives 60x16 text on
4k screens), so we don't need more for now, and we can easily increase
later.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Fix missing prototype warnings in various places, including switching
to using generic cmpdi2/ucmpdi2 and parport.h and stop selecting
unneeded GENERIC_ISA_DMA.
- Reduce duplicate code by using shared font data, with dependency
fixup in separate commit touching lib/fonts.
- Convert sbus drives to use remove callbacks returning void
- Fix return values of __setup handlers
- Section mismatch fix for grpci pci drivers
- Make the vio bus type constant
- Kconfig cleanups and fixes
- Typo fixes
* tag 'sparc-for-6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
lib/fonts: Allow Sparc console 8x16 font for sparc64 early boot text console
sbus: uctrl: Convert to platform remove callback returning void
sbus: flash: Convert to platform remove callback returning void
sbus: envctrl: Convert to platform remove callback returning void
sbus: display7seg: Convert to platform remove callback returning void
sbus: bbc_i2c: Convert to platform remove callback returning void
sbus: Add prototype for bbc_envctrl_init and bbc_envctrl_cleanup to header
sparc32: Fix section mismatch in leon_pci_grpci
sparc32: Fix parport build with sparc32
sparc32: Do not select GENERIC_ISA_DMA
mtd: maps: sun_uflash: Declare uflash_devinit static
sparc32: Fix build with trapbase
sparc32: Use generic cmpdi2/ucmpdi2 variants
sparc: select FRAME_POINTER instead of redefining it
sparc: vDSO: fix return value of __setup handler
sparc64: NMI watchdog: fix return value of __setup handler
sparc: vio: make vio_bus_type const
sparc: Fix typos
sparc: Use shared font data
sparc: remove obsolete config ARCH_ATU
|
|
Pull bcachefs updates from Kent Overstreet:
- Subvolume children btree; this is needed for providing a userspace
interface for walking subvolumes, which will come later
- Lots of improvements to directory structure checking
- Improved journal pipelining, significantly improving performance on
high iodepth write workloads
- Discard path improvements: the discard path is more efficient, and no
longer flushes the journal unnecessarily
- Buffered write path can now avoid taking the inode lock
- new mm helper: memalloc_flags_{save|restore}
- mempool now does kvmalloc mempools
* tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs: (128 commits)
bcachefs: time_stats: shrink time_stat_buffer for better alignment
bcachefs: time_stats: split stats-with-quantiles into a separate structure
bcachefs: mean_and_variance: put struct mean_and_variance_weighted on a diet
bcachefs: time_stats: add larger units
bcachefs: pull out time_stats.[ch]
bcachefs: reconstruct_alloc cleanup
bcachefs: fix bch_folio_sector padding
bcachefs: Fix btree key cache coherency during replay
bcachefs: Always flush write buffer in delete_dead_inodes()
bcachefs: Fix order of gc_done passes
bcachefs: fix deletion of indirect extents in btree_gc
bcachefs: Prefer struct_size over open coded arithmetic
bcachefs: Kill unused flags argument to btree_split()
bcachefs: Check for writing superblocks with nonsense member seq fields
bcachefs: fix bch2_journal_buf_to_text()
lib/generic-radix-tree.c: Make nodes more reasonably sized
bcachefs: copy_(to|from)_user_errcode()
bcachefs: Split out bkey_types.h
bcachefs: fix lost journal buf wakeup due to improved pipelining
bcachefs: intercept mountoption value for bool type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
|
|
this code originally used the page allocator directly, but most code
shouldn't do that - PAGE_SIZE varies with architecture, and slab is
faster.
4k is also on the large side for typical usage, 512 bytes is a better
choice for typical usage that might be somewhat sparse.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Christophe Leroy did most of the work on this release, first with a
few cleanups on CONFIG_STRICT_KERNEL_RWX and ending with error
handling for when set_memory_XX() can fail.
This is part of a larger effort to clean up all these callers which
can fail, modules is just part of it"
* tag 'modules-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Don't ignore errors from set_memory_XX()
lib/test_kmod: fix kernel-doc warnings
powerpc: Simplify strict_kernel_rwx_enabled()
modules: Remove #ifdef CONFIG_STRICT_MODULE_RWX around rodata_enabled
init: Declare rodata_enabled and mark_rodata_ro() at all time
module: Change module_enable_{nx/x/ro}() to more explicit names
module: Use set_memory_rox()
|
|
There exist card implementations with a CDAT table using a fixed size
buffer, but with entries filled in that do not fill the whole table
length size. Then, the last entry in the CDAT table may not mark the
end of the CDAT table buffer specified by the length field in the CDAT
header. It can be shorter with trailing unused (zero'ed) data. The
actual table length is determined while reading all CDAT entries of
the table with DOE.
If the table is greater than expected (containing zero'ed trailing
data), the CDAT parser fails with:
[ 48.691717] Malformed DSMAS table length: (24:0)
[ 48.702084] [CDAT:0x00] Invalid zero length
[ 48.711460] cxl_port endpoint1: Failed to parse CDAT: -22
In addition, a check of the table buffer length is missing to prevent
an out-of-bound access then parsing the CDAT table.
Hardening code against device returning borked table. Fix that by
providing an optional buffer length argument to
acpi_parse_entries_array() that can be used by cdat_table_parse() to
propagate the buffer size down to its users to check the buffer
length. This also prevents a possible out-of-bound access mentioned.
Add a check to warn about a malformed CDAT table length.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/ZdEnopFO0Tl3t2O1@rric.localdomain
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
"Improve the behavior during panic. The issues were found when testing
the ongoing changes introducing atomic consoles and printk kthreads:
- pr_flush() has to wait for the last reserved record instead of the
last finalized one. Note that records are finalized in random order
when generated by more CPUs in parallel.
- Ignore non-finalized records during panic(). Messages printed on
panic-CPU are always finalized. Messages printed by other CPUs
might never be finalized when the CPUs get stopped.
- Block new printk() calls on non-panic CPUs completely. Backtraces
are printed before entering the panic mode. Later messages would
just mess information printed by the panic CPU.
- Do not take console_lock in console_flush_on_panic() at all. The
original code did try_lock()/console_unlock(). The unlock part
might cause a deadlock when panic() happened in a scheduler code.
- Fix conversion of 64-bit sequence number for 32-bit atomic
operations"
* tag 'printk-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
dump_stack: Do not get cpu_sync for panic CPU
panic: Flush kernel log buffer at the end
printk: Avoid non-panic CPUs writing to ringbuffer
printk: Disable passing console lock owner completely during panic()
printk: ringbuffer: Skip non-finalized records in panic
printk: Wait for all reserved records with pr_flush()
printk: ringbuffer: Cleanup reader terminology
printk: Add this_cpu_in_panic()
printk: For @suppress_panic_printk check for other CPU in panic
printk: ringbuffer: Clarify special lpos values
printk: ringbuffer: Do not skip non-finalized records with prb_next_seq()
printk: Use prb_first_seq() as base for 32bit seq macros
printk: Adjust mapping for 32bit seq macros
printk: nbcon: Relocate 32bit seq macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
|
Returning the edit variable is redundant because it is dereferenced right
before it is returned. It would be better to return true.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Link: https://lkml.kernel.org/r/20240307071717.5318-1-r.smirnov@omp.ru
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use kmap_local_page() instead of kmap_atomic() which has been deprecated.
Link: https://lkml.kernel.org/r/20240306034804.62087-1-flyingpeng@tencent.com
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As indicated in the added comment, the algorithm works better if b is big.
As multiplication is commutative, a and b can be swapped. Do this if a
is bigger than b.
Link: https://lkml.kernel.org/r/20240303092408.662449-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Fix error handling in Processor Activity Instrumentation device
driver, and export number of counters with a sysfs file
- Allow for multiple events when Processor Activity Instrumentation
counters are monitored in system wide sampling
- Change multiplier and shift values of the Time-of-Day clock source to
improve steering precision
- Remove a couple of unneeded GFP_DMA flags from allocations
- Disable mmap alignment if randomize_va_space is also disabled, to
avoid a too small heap
- Various changes to allow s390 to be compiled with LLVM=1, since
ld.lld and llvm-objcopy will have proper s390 support witch clang 19
- Add __uninitialized macro to Compiler Attributes. This is helpful
with s390's FPU code where some users have up to 520 byte stack
frames. Clearing such stack frames (if INIT_STACK_ALL_PATTERN or
INIT_STACK_ALL_ZERO is enabled) before they are used contradicts the
intention (performance improvement) of such code sections.
- Convert switch_to() to an out-of-line function, and use the generic
switch_to header file
- Replace the usage of s390's debug feature with pr_debug() calls
within the zcrypt device driver
- Improve hotplug support of the Adjunct Processor device driver
- Improve retry handling in the zcrypt device driver
- Various changes to the in-kernel FPU code:
- Make in-kernel FPU sections preemptible
- Convert various larger inline assemblies and assembler files to
C, mainly by using singe instruction inline assemblies. This
increases readability, but also allows makes it easier to add
proper instrumentation hooks
- Cleanup of the header files
- Provide fast variants of csum_partial() and
csum_partial_copy_nocheck() based on vector instructions
- Introduce and use a lock to synchronize accesses to zpci device data
structures to avoid inconsistent states caused by concurrent accesses
- Compile the kernel without -fPIE. This addresses the following
problems if the kernel is compiled with -fPIE:
- It uses dynamic symbols (.dynsym), for which the linker refuses
to allow more than 64k sections. This can break features which
use '-ffunction-sections' and '-fdata-sections', including
kpatch-build and function granular KASLR
- It unnecessarily uses GOT relocations, adding an extra layer of
indirection for many memory accesses
- Fix shared_cpu_list for CPU private L2 caches, which incorrectly were
reported as globally shared
* tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (117 commits)
s390/tools: handle rela R_390_GOTPCDBL/R_390_GOTOFF64
s390/cache: prevent rebuild of shared_cpu_list
s390/crypto: remove retry loop with sleep from PAES pkey invocation
s390/pkey: improve pkey retry behavior
s390/zcrypt: improve zcrypt retry behavior
s390/zcrypt: introduce retries on in-kernel send CPRB functions
s390/ap: introduce mutex to lock the AP bus scan
s390/ap: rework ap_scan_bus() to return true on config change
s390/ap: clarify AP scan bus related functions and variables
s390/ap: rearm APQNs bindings complete completion
s390/configs: increase number of LOCKDEP_BITS
s390/vfio-ap: handle hardware checkstop state on queue reset operation
s390/pai: change sampling event assignment for PMU device driver
s390/boot: fix minor comment style damages
s390/boot: do not check for zero-termination relocation entry
s390/boot: make type of __vmlinux_relocs_64_start|end consistent
s390/boot: sanitize kaslr_adjust_relocs() function prototype
s390/boot: simplify GOT handling
s390: vmlinux.lds.S: fix .got.plt assertion
s390/boot: workaround current 'llvm-objdump -t -j ...' behavior
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Micro-optimize local_xchg() and the rtmutex code on x86
- Fix percpu-rwsem contention tracepoints
- Simplify debugging Kconfig dependencies
- Update/clarify the documentation of atomic primitives
- Misc cleanups
* tag 'locking-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Use try_cmpxchg_relaxed() in mark_rt_mutex_waiters()
locking/x86: Implement local_xchg() using CMPXCHG without the LOCK prefix
locking/percpu-rwsem: Trigger contention tracepoints only if contended
locking/rwsem: Make DEBUG_RWSEMS and PREEMPT_RT mutually exclusive
locking/rwsem: Clarify that RWSEM_READER_OWNED is just a hint
locking/mutex: Simplify <linux/mutex.h>
locking/qspinlock: Fix 'wait_early' set but not used warning
locking/atomic: scripts: Clarify ordering of conditional atomics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Misc features, cleanups, and fixes for vfs and individual filesystems.
Features:
- Support idmapped mounts for hugetlbfs.
- Add RWF_NOAPPEND flag for pwritev2(). This allows us to fix a bug
where the passed offset is ignored if the file is O_APPEND. The new
flag allows a caller to enforce that the offset is honored to
conform to posix even if the file was opened in append mode.
- Move i_mmap_rwsem in struct address_space to avoid false sharing
between i_mmap and i_mmap_rwsem.
- Convert efs, qnx4, and coda to use the new mount api.
- Add a generic is_dot_dotdot() helper that's used by various
filesystems and the VFS code instead of open-coding it multiple
times.
- Recently we've added stable offsets which allows stable ordering
when iterating directories exported through NFS on e.g., tmpfs
filesystems. Originally an xarray was used for the offset map but
that caused slab fragmentation issues over time. This switches the
offset map to the maple tree which has a dense mode that handles
this scenario a lot better. Includes tests.
- Finally merge the case-insensitive improvement series Gabriel has
been working on for a long time. This cleanly propagates case
insensitive operations through ->s_d_op which in turn allows us to
remove the quite ugly generic_set_encrypted_ci_d_ops() operations.
It also improves performance by trying a case-sensitive comparison
first and then fallback to case-insensitive lookup if that fails.
This also fixes a bug where overlayfs would be able to be mounted
over a case insensitive directory which would lead to all sort of
odd behaviors.
Cleanups:
- Make file_dentry() a simple accessor now that ->d_real() is
simplified because of the backing file work we did the last two
cycles.
- Use the dedicated file_mnt_idmap helper in ntfs3.
- Use smp_load_acquire/store_release() in the i_size_read/write
helpers and thus remove the hack to handle i_size reads in the
filemap code.
- The SLAB_MEM_SPREAD is a nop now. Remove it from various places in
fs/
- It's no longer necessary to perform a second built-in initramfs
unpack call because we retain the contents of the previous
extraction. Remove it.
- Now that we have removed various allocators kfree_rcu() always
works with kmem caches and kmalloc(). So simplify various places
that only use an rcu callback in order to handle the kmem cache
case.
- Convert the pipe code to use a lockdep comparison function instead
of open-coding the nesting making lockdep validation easier.
- Move code into fs-writeback.c that was located in a header but can
be made static as it's only used in that one file.
- Rewrite the alignment checking iterators for iovec and bvec to be
easier to read, and also significantly more compact in terms of
generated code. This saves 270 bytes of text on x86-64 (with
clang-18) and 224 bytes on arm64 (with gcc-13). In profiles it also
saves a bit of time for the same workload.
- Switch various places to use KMEM_CACHE instead of
kmem_cache_create().
- Use inode_set_ctime_to_ts() in inode_set_ctime_current()
- Use kzalloc() in name_to_handle_at() to avoid kernel infoleak.
- Various smaller cleanups for eventfds.
Fixes:
- Fix various comments and typos, and unneeded initializations.
- Fix stack allocation hack for clang in the select code.
- Improve dump_mapping() debug code on a best-effort basis.
- Fix build errors in various selftests.
- Avoid wrap-around instrumentation in various places.
- Don't allow user namespaces without an idmapping to be used for
idmapped mounts.
- Fix sysv sb_read() call.
- Fix fallback implementation of the get_name() export operation"
* tag 'vfs-6.9.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (70 commits)
hugetlbfs: support idmapped mounts
qnx4: convert qnx4 to use the new mount api
fs: use inode_set_ctime_to_ts to set inode ctime to current time
libfs: Drop generic_set_encrypted_ci_d_ops
ubifs: Configure dentry operations at dentry-creation time
f2fs: Configure dentry operations at dentry-creation time
ext4: Configure dentry operations at dentry-creation time
libfs: Add helper to choose dentry operations at mount-time
libfs: Merge encrypted_ci_dentry_ops and ci_dentry_ops
fscrypt: Drop d_revalidate once the key is added
fscrypt: Drop d_revalidate for valid dentries during lookup
fscrypt: Factor out a helper to configure the lookup dentry
ovl: Always reject mounting over case-insensitive directories
libfs: Attempt exact-match comparison first during casefolded lookup
efs: remove SLAB_MEM_SPREAD flag usage
jfs: remove SLAB_MEM_SPREAD flag usage
minix: remove SLAB_MEM_SPREAD flag usage
openpromfs: remove SLAB_MEM_SPREAD flag usage
proc: remove SLAB_MEM_SPREAD flag usage
qnx6: remove SLAB_MEM_SPREAD flag usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- fix to make kunit_bus_type const
- kunit tool change to Print UML command
- DRM device creation helpers are now using the new kunit device
creation helpers. This change resulted in DRM helpers switching from
using a platform_device, to a dedicated bus and device type used by
kunit. kunit devices don't set DMA mask and this caused regression on
some drm tests as they can't allocate DMA buffers. Fix this problem
by setting DMA masks on the kunit device during initialization.
- KUnit has several macros which accept a log message, which can
contain printf format specifiers. Some of these (the explicit log
macros) already use the __printf() gcc attribute to ensure the format
specifiers are valid, but those which could fail the test, and hence
used __kunit_do_failed_assertion() behind the scenes, did not.
These include: KUNIT_EXPECT_*_MSG(), KUNIT_ASSERT_*_MSG(), and
KUNIT_FAIL()
A nine-patch series adds the __printf() attribute, and fixes all of
the issues uncovered.
* tag 'linux_kselftest-kunit-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Annotate _MSG assertion variants with gnu printf specifiers
drm: tests: Fix invalid printf format specifiers in KUnit tests
drm/xe/tests: Fix printf format specifiers in xe_migrate test
net: test: Fix printf format specifier in skb_segment kunit test
rtc: test: Fix invalid format specifier.
time: test: Fix incorrect format specifier
lib: memcpy_kunit: Fix an invalid format specifier in an assertion msg
lib/cmdline: Fix an invalid format specifier in an assertion msg
kunit: test: Log the correct filter string in executor_test
kunit: Setup DMA masks on the kunit device
kunit: make kunit_bus_type const
kunit: Mark filter* params as rw
kunit: tool: Print UML command
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
- livepatch restructuring to move the module out of lib to be built as
a out-of-tree modules during kselftest build. This makes it easier
change, debug and rebuild the tests by running make on the
selftests/livepatch directory, which is not currently possible since
the modules on lib/livepatch are build and installed using the main
makefile modules target.
- livepatch restructuring fixes for problems found by kernel test
robot. The change skips the test if kernel-devel isn't installed
(default value of KDIR), or if KDIR variable passed doesn't exists.
- resctrl test restructuring and new non-contiguous CBMs CAT test
- new ktap_helpers to print diagnostic messages, pass/fail tests based
on exit code, abort test, and finish the test.
- a new test verify power supply properties.
- a new ftrace to exercise function tracer across cpu hotplug.
- timeout increase for mqueue test to allow the test to run on i3.metal
AWS instances.
- minor spelling corrections in several tests.
- missing gitignore files and changes to existing gitignore files.
* tag 'linux_kselftest-next-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (57 commits)
kselftest: Add basic test for probing the rust sample modules
selftests: lib.mk: Do not process TEST_GEN_MODS_DIR
selftests: livepatch: Avoid running the tests if kernel-devel is missing
selftests: livepatch: Add initial .gitignore
selftests/resctrl: Add non-contiguous CBMs CAT test
selftests/resctrl: Add resource_info_file_exists()
selftests/resctrl: Split validate_resctrl_feature_request()
selftests/resctrl: Add a helper for the non-contiguous test
selftests/resctrl: Add test groups and name L3 CAT test L3_CAT
selftests: sched: Fix spelling mistake "hiearchy" -> "hierarchy"
selftests/mqueue: Set timeout to 180 seconds
selftests/ftrace: Add test to exercize function tracer across cpu hotplug
selftest: ftrace: fix minor typo in log
selftests: thermal: intel: workload_hint: add missing gitignore
selftests: thermal: intel: power_floor: add missing gitignore
selftests: uevent: add missing gitignore
selftests: Add test to verify power supply properties
selftests: ktap_helpers: Add a helper to finish the test
selftests: ktap_helpers: Add a helper to abort the test
selftests: ktap_helpers: Add helper to pass/fail test based on exit code
...
|
|
These helpers scatters or gathers a bitmap with the help of the mask
position bits parameter.
bitmap_scatter() does the following:
src: 0000000001011010
||||||
+------+|||||
| +----+||||
| |+----+|||
| || +-+||
| || | ||
mask: ...v..vv...v..vv
...0..11...0..10
dst: 0000001100000010
and bitmap_gather() performs this one:
mask: ...v..vv...v..vv
src: 0000001100000010
^ ^^ ^ 0
| || | 10
| || > 010
| |+--> 1010
| +--> 11010
+----> 011010
dst: 0000000000011010
bitmap_gather() can the seen as the reverse bitmap_scatter() operation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/lkml/20230926052007.3917389-3-andriy.shevchenko@linux.intel.com/
Co-developed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow FONT_SUN8x16 when EARLYFB is enabled for sparc64, even when
FRAMEBUFFER_CONSOLE is not to avoid the following warning for this case
WARNING: unmet direct dependencies detected for FONT_SUN8x16
Depends on [n]: FONT_SUPPORT [=y] && (FRAMEBUFFER_CONSOLE [=n] && (FONTS [=n] || SPARC [=y]) || BOOTX_TEXT)
Selected by [y]:
- EARLYFB [=y] && SPARC64 [=y]
by allowing it in the same manner as is done for powerpc in commit
0ebc7feae79a ("powerpc: Use shared font data").
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Fixes: 0f1991949d9b ("sparc: Use shared font data")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402241539.epQT43nI-lkp@intel.com/
Cc: "Dr. David Alan Gilbert" <linux@treblig.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Reviewed-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240307180742.900068-1-andreas@gaisler.com
|
|
softnet_data->time_squeeze is sometimes used as a proxy for
host overload or indication of scheduling problems. In practice
this statistic is very noisy and has hard to grasp units -
e.g. is 10 squeezes a second to be expected, or high?
Delaying network (NAPI) processing leads to drops on NIC queues
but also RTT bloat, impacting pacing and CA decisions.
Stalls are a little hard to detect on the Rx side, because
there may simply have not been any packets received in given
period of time. Packet timestamps help a little bit, but
again we don't know if packets are stale because we're
not keeping up or because someone (*cough* cgroups)
disabled IRQs for a long time.
We can, however, use Tx as a proxy for Rx stalls. Most drivers
use combined Rx+Tx NAPIs so if Tx gets starved so will Rx.
On the Tx side we know exactly when packets get queued,
and completed, so there is no uncertainty.
This patch adds stall checks to BQL. Why BQL? Because
it's a convenient place to add such checks, already
called by most drivers, and it has copious free space
in its structures (this patch adds no extra cache
references or dirtying to the fast path).
The algorithm takes one parameter - max delay AKA stall
threshold and increments a counter whenever NAPI got delayed
for at least that amount of time. It also records the length
of the longest stall.
To be precise every time NAPI has not polled for at least
stall thrs we check if there were any Tx packets queued
between last NAPI run and now - stall_thrs/2.
Unlike the classic Tx watchdog this mechanism does not
ignore stalls caused by Tx being disabled, or loss of link.
I don't think the check is worth the complexity, and
stall is a stall, whether due to host overload, flow
control, link down... doesn't matter much to the application.
We have been running this detector in production at Meta
for 2 years, with the threshold of 8ms. It's the lowest
value where false positives become rare. There's still
a constant stream of reported stalls (especially without
the ksoftirqd deferral patches reverted), those who like
their stall metrics to be 0 may prefer higher value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/page_pool_user.c
0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors")
429679dcf7d9 ("page_pool: fix netlink dump stop/resume")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace open coded functionalify of kstrdup_and_replace() with a call.
Link: https://lkml.kernel.org/r/20240213162741.3102810-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This flag is only set by one single user: the magical core dumping code
that looks up user pages one by one, and then writes them out using
their kernel addresses (by using a BVEC_ITER).
That actually ends up being a huge problem, because while we do use
copy_mc_to_kernel() for this case and it is able to handle the possible
machine checks involved, nothing else is really ready to handle the
failures caused by the machine check.
In particular, as reported by Tong Tiangen, we don't actually support
fault_in_iov_iter_readable() on a machine check area.
As a result, the usual logic for writing things to a file under a
filesystem lock, which involves doing a copy with page faults disabled
and then if that fails trying to fault pages in without holding the
locks with fault_in_iov_iter_readable() does not work at all.
We could decide to always just make the MC copy "succeed" (and filling
the destination with zeroes), and that would then create a core dump
file that just ignores any machine checks.
But honestly, this single special case has been problematic before, and
means that all the normal iov_iter code ends up slightly more complex
and slower.
See for example commit c9eec08bac96 ("iov_iter: Don't deal with
iter->copy_mc in memcpy_from_iter_mc()") where David Howells
re-organized the code just to avoid having to check the 'copy_mc' flags
inside the inner iov_iter loops.
So considering that we have exactly one user, and that one user is a
non-critical special case that doesn't actually ever trigger in real
life (Tong found this with manual error injection), the sane solution is
to just decide that the onus on handling the machine check lines on that
user instead.
Ergo, do the copy_mc_to_kernel() in the core dump logic itself, copying
the user data to a stable kernel page before writing it out.
Fixes: f1982740f5e7 ("iov_iter: Convert iterate*() to inline funcs")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20240305133336.3804360-1-tongtiangen@huawei.com
Link: https://lore.kernel.org/all/4e80924d-9c85-f13a-722a-6a5d2b1c225a@huawei.com/
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Convert test-string_helpers.c to KUnit so it can be easily run with
everything else.
Failure reporting doesn't need to be open-coded in most places, for
example, forcing a failure in the expected output for upper/lower
testing looks like this:
[12:18:43] # test_upper_lower: EXPECTATION FAILED at lib/string_helpers_kunit.c:579
[12:18:43] Expected dst == strings_upper[i].out, but
[12:18:43] dst == "ABCDEFGH1234567890TEST"
[12:18:43] strings_upper[i].out == "ABCDEFGH1234567890TeST"
[12:18:43] [FAILED] test_upper_lower
Currently passes without problems:
$ ./tools/testing/kunit/kunit.py run string_helpers
...
[12:23:55] Starting KUnit Kernel (1/1)...
[12:23:55] ============================================================
[12:23:55] =============== string_helpers (3 subtests) ================
[12:23:55] [PASSED] test_get_size
[12:23:55] [PASSED] test_upper_lower
[12:23:55] [PASSED] test_unescape
[12:23:55] ================= [PASSED] string_helpers ==================
[12:23:55] ============================================================
[12:23:55] Testing complete. Ran 3 tests: passed: 3
[12:23:55] Elapsed time: 6.709s total, 0.001s configuring, 6.591s building, 0.066s running
Link: https://lore.kernel.org/r/20240301202732.2688342-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Convert test_string.c to KUnit so it can be easily run with everything
else.
Additional text context is retained for failure reporting. For example,
when forcing a bad match, we can see the loop counters reported for the
memset() tests:
[09:21:52] # test_memset64: ASSERTION FAILED at lib/string_kunit.c:93
[09:21:52] Expected v == 0xa2a1a1a1a1a1a1a1ULL, but
[09:21:52] v == -6799976246779207263 (0xa1a1a1a1a1a1a1a1)
[09:21:52] 0xa2a1a1a1a1a1a1a1ULL == -6727918652741279327 (0xa2a1a1a1a1a1a1a1)
[09:21:52] i:0 j:0 k:0
[09:21:52] [FAILED] test_memset64
Currently passes without problems:
$ ./tools/testing/kunit/kunit.py run string
...
[09:37:40] Starting KUnit Kernel (1/1)...
[09:37:40] ============================================================
[09:37:40] =================== string (6 subtests) ====================
[09:37:40] [PASSED] test_memset16
[09:37:40] [PASSED] test_memset32
[09:37:40] [PASSED] test_memset64
[09:37:40] [PASSED] test_strchr
[09:37:40] [PASSED] test_strnchr
[09:37:40] [PASSED] test_strspn
[09:37:40] ===================== [PASSED] string ======================
[09:37:40] ============================================================
[09:37:40] Testing complete. Ran 6 tests: passed: 6
[09:37:40] Elapsed time: 6.730s total, 0.001s configuring, 6.562s building, 0.131s running
Link: https://lore.kernel.org/r/20240301202732.2688342-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Use an unsigned long constant instead of an int constant and a cast. This
fixes the checkpatch warning
WARNING: Unnecessary typecast of c90 int constant - '(unsigned long) 1' could be '1UL'
+ align = ((unsigned long) 1) << i;
Link: https://lkml.kernel.org/r/20240226191159.39509-4-martin@kaiser.cx
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The module is never loaded successfully. Therefore, it'll never be
unloaded and we can remove the exit function.
Link: https://lkml.kernel.org/r/20240226191159.39509-3-martin@kaiser.cx
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix a typo and change the function name to init_test_configuration. Both
caller and definition have the same typo, so the current code already
works.
Link: https://lkml.kernel.org/r/20240226191159.39509-2-martin@kaiser.cx
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The stack_pools[] array has DEPOT_MAX_POOLS. The "pools_num" tracks the
number of pools which are initialized. See depot_init_pool() for more
details.
If pool_index == pools_num_cached, this will read one element beyond what
we want. If not all the pools are initialized, then the pool will be
NULL, triggering a WARN(), and if they are all initialized it will read
one element beyond the end of the array.
Link: https://lkml.kernel.org/r/361ac881-60b7-471f-91e5-5bf8fe8042b2@moroto.mountain
Fixes: b29d31885814 ("lib/stackdepot: store free stack records in a freelist")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The new flags parameter allows controlling
- Whether or not the units suffix is separated by a space, for
compatibility with sort -h
- Whether or not to append a B suffix - we're not always printing
bytes.
Co-developed-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240229205345.93902-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mptcp/protocol.c
adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket")
9426ce476a70 ("mptcp: annotate lockless access for RX path fields")
https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/
Adjacent changes:
drivers/dpll/dpll_core.c
0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()")
e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order")
drivers/net/veth.c
1ce7d306ea63 ("veth: try harder when allocating queue memory")
0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers")
drivers/net/wireless/intel/iwlwifi/mvm/d3.c
8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO")
78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists")
net/wireless/nl80211.c
f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change")
414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For reasons I cannot understand, m68k moves the start of the stack frame
for consecutive calls to the same function if the function's test
variable is larger than 8 bytes. This was only happening for the char
array test (obviously), so adjust the length of the string for m68k
only. I want the array size to be longer than "unsigned long" for every
given architecture, so the other remain unchanged.
Additionally adjust the error message to be a bit more clear about
what's happened, and move the KUNIT check outside of the consecutive
calls to minimize what happens between them.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/a0d10d50-2720-4ecd-a2c6-c2c5e5aeee65@roeck-us.net/
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/r/CAMuHMdX_g1tbiUL9PUQdqaegrEzCNN3GtbSvSBFYAL4TzvstFg@mail.gmail.com
Closes: https://lore.kernel.org/r/CAMuHMdW6N40+0gGQ+LSrN64Mo4A0-ELAm0pR3gWQ0mNanyBuUQ@mail.gmail.com
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/a4bf4063-194f-4740-9c1d-88f9ab38b778@roeck-us.net
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Improve the reporting of buffer overflows under CONFIG_FORTIFY_SOURCE to
help accelerate debugging efforts. The calculations are all just sitting
in registers anyway, so pass them along to the function to be reported.
For example, before:
detected buffer overflow in memcpy
and after:
memcpy: detected buffer overflow: 4096 byte read of buffer size 1
Link: https://lore.kernel.org/r/20230407192717.636137-10-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
With fortify overflows able to be redirected, we can use KUnit to
exercise the overflow conditions. Add tests for every API covered by
CONFIG_FORTIFY_SOURCE, except for memset() and memcpy(), which are
special-cased for now.
Disable warnings in the Makefile since we're explicitly testing
known-bad string handling code patterns.
Note that this makes the LKDTM FORTIFY_STR* tests obsolete, but those
can be removed separately.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The standard C string APIs were not designed to have a failure mode;
they were expected to always succeed without memory safety issues.
Normally, CONFIG_FORTIFY_SOURCE will use fortify_panic() to stop
processing, as truncating a read or write may provide an even worse
system state. However, this creates a problem for testing under things
like KUnit, which needs a way to survive failures.
When building with CONFIG_KUNIT, provide a failure path for all users
of fortify_panic, and track whether the failure was a read overflow or
a write overflow, for KUnit tests to examine. Inspired by similar logic
in the slab tests.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In order for CI systems to notice all the skipped tests related to
CONFIG_FORTIFY_SOURCE, allow the FORTIFY_SOURCE KUnit tests to build
with or without CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In preparation for KUnit testing and further improvements in fortify
failure reporting, split out the report and encode the function and access
failure (read or write overflow) into a single u8 argument. This mainly
ends up saving a tiny bit of space in the data segment. For a defconfig
with FORTIFY_SOURCE enabled:
$ size gcc/vmlinux.before gcc/vmlinux.after
text data bss dec hex filename
26132309 9760658 2195460 38088427 2452eeb gcc/vmlinux.before
26132386 9748382 2195460 38076228 244ff44 gcc/vmlinux.after
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This allows replacements of the idioms "var += offset" and "var -=
offset" with the wrapping_assign_add() and wrapping_assign_sub() helpers
respectively. They will avoid wrap-around sanitizer instrumentation.
Add to the selftests to validate behavior and lack of side-effects.
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Provide helpers that will perform wrapping addition, subtraction, or
multiplication without tripping the arithmetic wrap-around sanitizers. The
first argument is the type under which the wrap-around should happen
with. In other words, these two calls will get very different results:
wrapping_mul(int, 50, 50) == 2500
wrapping_mul(u8, 50, 50) == 196
Add to the selftests to validate behavior and lack of side-effects.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
|
|
Commit b38460bc463c ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.
So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The debugging code enabled by CONFIG_DEBUG_RWSEMS=y will only be
compiled in when CONFIG_PREEMPT_RT isn't set. There is no point to
allow CONFIG_DEBUG_RWSEMS to be set in a kernel configuration where
CONFIG_PREEMPT_RT is also set. Make them mutually exclusive.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240222150540.79981-5-longman@redhat.com
|
|
The 'i' passed as an assertion message is a size_t, so should use '%zu',
not '%d'.
This was found by annotating the _MSG() variants of KUnit's assertions
to let gcc validate the format strings.
Fixes: bb95ebbe89a7 ("lib: Introduce CONFIG_MEMCPY_KUNIT_TEST")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The correct format specifier for p - n (both p and n are pointers) is
%td, as the type should be ptrdiff_t.
This was discovered by annotating KUnit assertion macros with gcc's
printf specifier, but note that gcc incorrectly suggested a %d or %ld
specifier (depending on the pointer size of the architecture being
built).
Fixes: 0ea09083116d ("lib/cmdline: Allow get_options() to take 0 to validate the input")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
KUnit's executor_test logs the filter string in KUNIT_ASSERT_EQ_MSG(),
but passed a random character from the filter, rather than the whole
string.
This was found by annotating KUNIT_ASSERT_EQ_MSG() to let gcc validate
the format string.
Fixes: 76066f93f1df ("kunit: add tests for filtering attributes")
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit d393acce7b3f ("drm/tests: Switch to kunit devices") switched the
DRM device creation helpers from an ad-hoc implementation to the new
kunit device creation helpers introduced in commit d03c720e03bd ("kunit:
Add APIs for managing devices").
However, while the DRM helpers were using a platform_device, the kunit
helpers are using a dedicated bus and device type.
That situation creates small differences in the initialisation, and one
of them is that the kunit devices do not have the DMA masks setup. In
turn, this means that we can't do any kind of DMA buffer allocation
anymore, which creates a regression on some (downstream for now) tests.
Let's set up a default DMA mask that should work on any platform to fix
it.
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the kunit_bus_type variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
By allowing the filter_glob parameter to be written to, it's possible to
tweak the testsuites that will be executed on new module loads. This
makes it easier to run specific tests without having to reload kunit and
provides a way to filter tests on real HW even if kunit is builtin.
Example for xe driver:
1) Run just 1 test
# echo -n xe_bo > /sys/module/kunit/parameters/filter_glob
# modprobe -r xe_live_test
# modprobe xe_live_test
# ls /sys/kernel/debug/kunit/
xe_bo
2) Run all tests
# echo \* > /sys/module/kunit/parameters/filter_glob
# modprobe -r xe_live_test
# modprobe xe_live_test
# ls /sys/kernel/debug/kunit/
xe_bo xe_dma_buf xe_migrate xe_mocs
For completeness and to cover other use cases, also change filter and
filter_action to rw.
Link: https://lore.kernel.org/intel-xe/dzacvbdditbneiu3e3fmstjmttcbne44yspumpkd6sjn56jqpk@vxu7sksbqrp6/
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now move the relevant codes into separate files:
kernel/crash_reserve.c, include/linux/crash_reserve.h.
And add config item CRASH_RESERVE to control its enabling.
And also update the old ifdeffery of CONFIG_CRASH_CORE, including of
<linux/crash_core.h> and config item dependency on CRASH_CORE
accordingly.
And also do renaming as follows:
- arch/xxx/kernel/{crash_core.c => vmcore_info.c}
because they are only related to vmcoreinfo exporting on x86, arm64,
riscv.
And also Remove config item CRASH_CORE, and rely on CONFIG_KEXEC_CORE to
decide if build in crash_core.c.
[yang.lee@linux.alibaba.com: remove duplicated include in vmcore_info.c]
Link: https://lkml.kernel.org/r/20240126005744.16561-1-yang.lee@linux.alibaba.com
Link: https://lkml.kernel.org/r/20240124051254.67105-3-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
page_owner needs to increment a stack_record refcount when a new
allocation occurs, and decrement it on a free operation. In order to do
that, we need to have a way to get a stack_record from a handle.
Implement __stack_depot_get_stack_record() which just does that, and make
it public so page_owner can use it.
Also, traversing all stackdepot buckets comes with its own complexity,
plus we would have to implement a way to mark only those stack_records
that were originated from page_owner, as those are the ones we are
interested in. For that reason, page_owner maintains its own list of
stack_records, because traversing that list is faster than traversing all
buckets while keeping at the same time a low complexity.
For now, add to stack_list only the stack_records of dummy_handle and
failure_handle, and set their refcount of 1.
Further patches will add code to increment or decrement stack_records
count on allocation and free operation.
Link: https://lkml.kernel.org/r/20240215215907.20121-4-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In order to move the heavy lifting into page_owner code, this one needs to
have access to the stack_record structure, which right now sits in
lib/stackdepot.c. Move it to the stackdepot.h header so page_owner can
access stack_record's struct fields.
Link: https://lkml.kernel.org/r/20240215215907.20121-3-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "page_owner: print stacks and their outstanding allocations",
v10.
page_owner is a great debug functionality tool that lets us know about all
pages that have been allocated/freed and their specific stacktrace. This
comes very handy when debugging memory leaks, since with some scripting we
can see the outstanding allocations, which might point to a memory leak.
In my experience, that is one of the most useful cases, but it can get
really tedious to screen through all pages and try to reconstruct the
stack <-> allocated/freed relationship, becoming most of the time a
daunting and slow process when we have tons of allocation/free operations.
This patchset aims to ease that by adding a new functionality into
page_owner. This functionality creates a new directory called
'page_owner_stacks' under 'sys/kernel//debug' with a read-only file called
'show_stacks', which prints out all the stacks followed by their
outstanding number of allocations (being that the times the stacktrace has
allocated but not freed yet). This gives us a clear and a quick overview
of stacks <-> allocated/free.
We take advantage of the new refcount_f field that stack_record struct
gained, and increment/decrement the stack refcount on every
__set_page_owner() (alloc operation) and __reset_page_owner (free
operation) call.
Unfortunately, we cannot use the new stackdepot api STACK_DEPOT_FLAG_GET
because it does not fulfill page_owner needs, meaning we would have to
special case things, at which point makes more sense for page_owner to do
its own {dec,inc}rementing of the stacks. E.g: Using
STACK_DEPOT_FLAG_PUT, once the refcount reaches 0, such stack gets
evicted, so page_owner would lose information.
This patchset also creates a new file called 'set_threshold' within
'page_owner_stacks' directory, and by writing a value to it, the stacks
which refcount is below such value will be filtered out.
A PoC can be found below:
# cat /sys/kernel/debug/page_owner_stacks/show_stacks > page_owner_full_stacks.txt
# head -40 page_owner_full_stacks.txt
prep_new_page+0xa9/0x120
get_page_from_freelist+0x801/0x2210
__alloc_pages+0x18b/0x350
alloc_pages_mpol+0x91/0x1f0
folio_alloc+0x14/0x50
filemap_alloc_folio+0xb2/0x100
page_cache_ra_unbounded+0x96/0x180
filemap_get_pages+0xfd/0x590
filemap_read+0xcc/0x330
blkdev_read_iter+0xb8/0x150
vfs_read+0x285/0x320
ksys_read+0xa5/0xe0
do_syscall_64+0x80/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
stack_count: 521
prep_new_page+0xa9/0x120
get_page_from_freelist+0x801/0x2210
__alloc_pages+0x18b/0x350
alloc_pages_mpol+0x91/0x1f0
folio_alloc+0x14/0x50
filemap_alloc_folio+0xb2/0x100
__filemap_get_folio+0x14a/0x490
ext4_write_begin+0xbd/0x4b0 [ext4]
generic_perform_write+0xc1/0x1e0
ext4_buffered_write_iter+0x68/0xe0 [ext4]
ext4_file_write_iter+0x70/0x740 [ext4]
vfs_write+0x33d/0x420
ksys_write+0xa5/0xe0
do_syscall_64+0x80/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
stack_count: 4609
...
...
# echo 5000 > /sys/kernel/debug/page_owner_stacks/set_threshold
# cat /sys/kernel/debug/page_owner_stacks/show_stacks > page_owner_full_stacks_5000.txt
# head -40 page_owner_full_stacks_5000.txt
prep_new_page+0xa9/0x120
get_page_from_freelist+0x801/0x2210
__alloc_pages+0x18b/0x350
alloc_pages_mpol+0x91/0x1f0
folio_alloc+0x14/0x50
filemap_alloc_folio+0xb2/0x100
__filemap_get_folio+0x14a/0x490
ext4_write_begin+0xbd/0x4b0 [ext4]
generic_perform_write+0xc1/0x1e0
ext4_buffered_write_iter+0x68/0xe0 [ext4]
ext4_file_write_iter+0x70/0x740 [ext4]
vfs_write+0x33d/0x420
ksys_pwrite64+0x75/0x90
do_syscall_64+0x80/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
stack_count: 6781
prep_new_page+0xa9/0x120
get_page_from_freelist+0x801/0x2210
__alloc_pages+0x18b/0x350
pcpu_populate_chunk+0xec/0x350
pcpu_balance_workfn+0x2d1/0x4a0
process_scheduled_works+0x84/0x380
worker_thread+0x12a/0x2a0
kthread+0xe3/0x110
ret_from_fork+0x30/0x50
ret_from_fork_asm+0x1b/0x30
stack_count: 8641
This patch (of 7):
The very first entry of stack_record gets a handle of 0, but this is wrong
because stackdepot treats a 0-handle as a non-valid one. E.g: See the
check in stack_depot_fetch()
Fix this by adding and offset of 1.
This bug has been lurking since the very beginning of stackdepot, but no
one really cared as it seems. Because of that I am not adding a Fixes
tag.
Link: https://lkml.kernel.org/r/20240215215907.20121-1-osalvador@suse.de
Link: https://lkml.kernel.org/r/20240215215907.20121-2-osalvador@suse.de
Co-developed-by: Marco Elver <elver@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
With the introduction of stack depot evictions, each stack record is now
fixed size, so that future reuse after an eviction can safely store
differently sized stack traces. In all cases that do not make use of
evictions, this wastes lots of space.
Fix it by re-introducing variable size stack records (up to the max
allowed size) for entries that will never be evicted. We know if an entry
will never be evicted if the flag STACK_DEPOT_FLAG_GET is not provided,
since a later stack_depot_put() attempt is undefined behavior.
With my current kernel config that enables KASAN and also SLUB owner
tracking, I observe (after a kernel boot) a whopping reduction of 296
stack depot pools, which translates into 4736 KiB saved. The savings here
are from SLUB owner tracking only, because KASAN generic mode still uses
refcounting.
Before:
pools: 893
allocations: 29841
frees: 6524
in_use: 23317
freelist_size: 3454
After:
pools: 597
refcounted_allocations: 17547
refcounted_frees: 6477
refcounted_in_use: 11070
freelist_size: 3497
persistent_count: 12163
persistent_bytes: 1717008
[elver@google.com: fix -Wstringop-overflow warning]
Link: https://lore.kernel.org/all/20240201135747.18eca98e@canb.auug.org.au/
Link: https://lkml.kernel.org/r/20240201090434.1762340-1-elver@google.com
Link: https://lore.kernel.org/all/CABXGCsOzpRPZGg23QqJAzKnqkZPKzvieeg=W7sgjgi3q0pBo0g@mail.gmail.com/
Link: https://lkml.kernel.org/r/20240129100708.39460-1-elver@google.com
Link: https://lore.kernel.org/all/CABXGCsOzpRPZGg23QqJAzKnqkZPKzvieeg=W7sgjgi3q0pBo0g@mail.gmail.com/
Fixes: 108be8def46e ("lib/stackdepot: allow users to evict stack traces")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline]
BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline]
BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline]
BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631
nla_validate_range_unsigned lib/nlattr.c:222 [inline]
nla_validate_int_range lib/nlattr.c:336 [inline]
validate_nla lib/nlattr.c:575 [inline]
...
The message in question matches this policy:
[NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255),
but because NLA_BE32 size in minlen array is 0, the validation
code will read past the malformed (too small) attribute.
Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing:
those likely should be added too.
Reported-by: syzbot+3f497b07aa3baf2fb4d0@syzkaller.appspotmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/all/CABOYnLzFYHSnvTyS6zGa-udNX55+izqkOt2sB9WDqUcEGW6n8w@mail.gmail.com/raw
Fixes: ecaf75ffd5f5 ("netlink: introduce bigendian integer types")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240221172740.5092-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the minimum supported version of LLVM for building the kernel has
been bumped to 13.0.1, this condition can be changed to just
CONFIG_CC_IS_CLANG, as the build will fail during the configuration stage
for older LLVM versions.
Link: https://lkml.kernel.org/r/20240125-bump-min-llvm-ver-to-13-0-1-v1-10-f5ff9bda41c5@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The help text for the Dhrystone benchmark test lacks a matching closing
parenthesis.
Link: https://lkml.kernel.org/r/772b43271bcb3dd17a6aae671b2084f08c05b079.1705934853.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the existing ktime_ms_delta() helper instead of open-coding the same
operation.
Link: https://lkml.kernel.org/r/bb43c67a7580de6152f5e6eb225071166d33b6e4.1705934853.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "lib: dhry: miscellaneous cleanups".
This patch series contains a few miscellaneous cleanups for the
Dhrystone benchmark test.
This patch (of 3):
The Dhrystone benchmark test does not use mutexes.
Link: https://lkml.kernel.org/r/cover.1705934853.git.geert+renesas@glider.be
Link: https://lkml.kernel.org/r/cf8fafaedccf96143f1513745c43a457480bfc24.1705934853.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The single variant of flex_proportions is not used. Simply remove it.
Link: https://lkml.kernel.org/r/20240118201321.759174-1-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Instead of popping only the maximum element from the heap during each
iteration, we now pop the two largest elements at once. Although this
introduces an additional comparison to determine the second largest
element, it enables a reduction in the height of the tree by one during
the heapify operations starting from root's left/right child. This
reduction in tree height by one leads to a decrease of one comparison and
one swap.
This optimization results in saving approximately 0.5 * n swaps without
increasing the number of comparisons. Additionally, the heap size during
heapify is now one less than the original size, offering a chance for
further reduction in comparisons and swaps.
The following experimental data is based on the array generated using
get_random_u32().
| N | swaps (old) | swaps (new) | comparisons (old) | comparisons (new) |
|-------|-------------|-------------|-------------------|-------------------|
| 1000 | 9054 | 8569 | 10328 | 10320 |
| 2000 | 20137 | 19182 | 22634 | 22587 |
| 3000 | 32062 | 30623 | 35833 | 35752 |
| 4000 | 44274 | 42282 | 49332 | 49306 |
| 5000 | 57195 | 54676 | 63300 | 63294 |
| 6000 | 70205 | 67202 | 77599 | 77557 |
| 7000 | 83276 | 79831 | 92113 | 92032 |
| 8000 | 96630 | 92678 | 106635 | 106617 |
| 9000 | 110349 | 105883 | 121505 | 121404 |
| 10000 | 124165 | 119202 | 136628 | 136617 |
Link: https://lkml.kernel.org/r/20240113031352.2395118-3-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: George Spelvin <lkml@sdf.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "lib/sort: Optimize the number of swaps and comparisons".
This patch series aims to optimize the heapsort algorithm, specifically
targeting a reduction in the number of swaps and comparisons required.
This patch (of 2):
Currently, when searching for the sift-down path and encountering equal
elements, the algorithm chooses the left child. However, considering that
the height of the right subtree may be one less than that of the left
subtree, selecting the right child in such cases can potentially reduce
the number of comparisons and swaps.
For instance, when sorting an array of 10,000 identical elements, the
current implementation requires 247,209 comparisons. With this patch, the
number of comparisons can be reduced to 227,241.
Link: https://lkml.kernel.org/r/20240113031352.2395118-1-visitorckw@gmail.com
Link: https://lkml.kernel.org/r/20240113031352.2395118-2-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
LLVM moved their issue tracker from their own Bugzilla instance to GitHub
issues. While all of the links are still valid, they may not necessarily
show the most up to date information around the issues, as all updates
will occur on GitHub, not Bugzilla.
Another complication is that the Bugzilla issue number is not always the
same as the GitHub issue number. Thankfully, LLVM maintains this mapping
through two shortlinks:
https://llvm.org/bz<num> -> https://bugs.llvm.org/show_bug.cgi?id=<num>
https://llvm.org/pr<num> -> https://github.com/llvm/llvm-project/issues/<mapped_num>
Switch all "https://bugs.llvm.org/show_bug.cgi?id=<num>" links to the
"https://llvm.org/pr<num>" shortlink so that the links show the most up to
date information. Each migrated issue links back to the Bugzilla entry,
so there should be no loss of fidelity of information here.
Link: https://lkml.kernel.org/r/20240109-update-llvm-links-v1-3-eb09b59db071@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Fangrui Song <maskray@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/udp.c
f796feabb9f5 ("udp: add local "peek offset enabled" flag")
56667da7399e ("net: implement lockless setsockopt(SO_PEEK_OFF)")
Adjacent changes:
net/unix/garbage.c
aa82ac51d633 ("af_unix: Drop oob_skb ref before purging queue in GC.")
11498715f266 ("af_unix: Remove io_uring code for GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XArray multi-index entries do not keep track of the order stored once the
entry is being marked as used with cmpxchg (conditionally replaced with
NULL). Add a test to check the order is actually lost. The test also
verifies the order and entries for all the tied indexes before and after
the NULL replacement with xa_cmpxchg.
Add another entry at 1 << order that keeps the node around and the order
information for the NULL-entry after xa_cmpxchg.
Link: https://lkml.kernel.org/r/20240131225125.1370598-3-mcgrof@kernel.org
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "test_xarray: advanced API multi-index tests", v2.
This is a respin of the test_xarray multi-index tests [0] which use and
demonstrate the advanced API which is used by the page cache. This should
let folks more easily follow how we use multi-index to support for example
a min order later in the page cache. It also lets us grow the selftests
to mimic more of what we do in the page cache.
This patch (of 2):
The multi index selftests are great but they don't replicate how we deal
with the page cache exactly, which makes it a bit hard to follow as the
page cache uses the advanced API.
Add tests which use the advanced API, mimicking what we do in the page
cache, while at it, extend the example to do what is needed for min order
support.
[mcgrof@kernel.org: fix soft lockup for advanced-api tests]
Link: https://lkml.kernel.org/r/20240216194329.840555-1-mcgrof@kernel.org
[akpm@linux-foundation.org: s/i/loops/, make non-static]
[akpm@linux-foundation.org: restore static storage for loop counter]
Link: https://lkml.kernel.org/r/20240131225125.1370598-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20240131225125.1370598-2-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The local variables r_tmp and l_tmp in mast_spanning_rebalance() are
already initialized at its declaration; there is no need to assign the
value again.
Remove the duplicate initialization of {r,l}_tmp. No functional change.
Due to common compiler optimizations, also no change to object code.
This issue was identified with clang-analyzer's dead stores analysis.
Link: https://lkml.kernel.org/r/20240122102000.29558-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net
Pull simple offset series from Chuck Lever
In an effort to address slab fragmentation issues reported a few
months ago, I've replaced the use of xarrays for the directory
offset map in "simple" file systems (including tmpfs).
Thanks to Liam Howlett for helping me get this working with Maple
Trees.
* series 'Use Maple Trees for simple_offset utilities' of https://lore.kernel.org/r/170820083431.6328.16233178852085891453.stgit@91.116.238.104.host.secureserver.net: (6 commits)
libfs: Convert simple directory offsets to use a Maple Tree
test_maple_tree: testing the cyclic allocation
maple_tree: Add mtree_alloc_cyclic()
libfs: Add simple_offset_empty()
libfs: Define a minimum directory offset
libfs: Re-arrange locking in offset_iterate_dir()
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The function description comment for mas_node_count_gfp() mistakingly
refers to the function as mas_node_count(). Change it to refer to the
correct function.
Link: https://lkml.kernel.org/r/20240109223119.162357-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This tests the interactions of the cyclic allocations, the maple state
index and last, and overflow.
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820144894.6328.13052830860966450674.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
I need a cyclic allocator for the simple_offset implementation in
fs/libfs.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/170820144179.6328.12838600511394432325.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Using sizeof(dst) for the "size" argument in strscpy() is the
overwhelmingly common case. Instead of requiring this everywhere, allow a
2-argument version to be used that will use the sizeof() internally. There
are other functions in the kernel with optional arguments[1], so this
isn't unprecedented, and improves readability. Update and relocate the
kern-doc for strscpy() too, and drop __HAVE_ARCH_STRSCPY as it is unused.
Adjust ARCH=um build to notice the changed export name, as it doesn't
do full header includes for the string helpers.
This could additionally let us save a few hundred lines of code:
1177 files changed, 2455 insertions(+), 3026 deletions(-)
with a treewide cleanup using Coccinelle:
@needless_arg@
expression DST, SRC;
@@
strscpy(DST, SRC
-, sizeof(DST)
)
Link: https://elixir.bootlin.com/linux/v6.7/source/include/linux/pci.h#L1517 [1]
Reviewed-by: Justin Stitt <justinstitt@google.com>
Cc: Andy Shevchenko <andy@kernel.org>
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In preparation for making strscpy_pad()'s 3rd argument optional, redefine
it as a macro. This also has the benefit of allowing greater FORITFY
introspection, as it couldn't see into the strscpy() nor the memset()
within strscpy_pad().
Cc: Andy Shevchenko <andy@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-hardening@vger.kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In order to mitigate unexpected signed wrap-around[1], bring back the
signed integer overflow sanitizer. It was removed in commit 6aaa31aeb9cf
("ubsan: remove overflow checks") because it was effectively a no-op
when combined with -fno-strict-overflow (which correctly changes signed
overflow from being "undefined" to being explicitly "wrap around").
Compilers are adjusting their sanitizers to trap wrap-around and to
detecting common code patterns that should not be instrumented
(e.g. "var + offset < var"). Prepare for this and explicitly rename
the option from "OVERFLOW" to "WRAP" to more accurately describe the
behavior.
To annotate intentional wrap-around arithmetic, the helpers
wrapping_add/sub/mul_wrap() can be used for individual statements. At
the function level, the __signed_wrap attribute can be used to mark an
entire function as expecting its signed arithmetic to wrap around. For a
single object file the Makefile can use "UBSAN_SIGNED_WRAP_target.o := n"
to mark it as wrapping, and for an entire directory, "UBSAN_SIGNED_WRAP :=
n" can be used.
Additionally keep these disabled under CONFIG_COMPILE_TEST for now.
Link: https://github.com/KSPP/linux/issues/26 [1]
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Hao Luo <haoluo@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Trying to run the iov_iter unit test on a nommu system such as the qemu
kc705-nommu emulation results in a crash.
KTAP version 1
# Subtest: iov_iter
# module: kunit_iov_iter
1..9
BUG: failure at mm/nommu.c:318/vmap()!
Kernel panic - not syncing: BUG!
The test calls vmap() directly, but vmap() is not supported on nommu
systems, causing the crash. TEST_IOV_ITER therefore needs to depend on
MMU.
Link: https://lkml.kernel.org/r/20240208153010.1439753-1-linux@roeck-us.net
Fixes: 2d71340ff1d4 ("iov_iter: Kunit tests for copying to/from an iterator")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
'def_bool X' is a shorthand for 'bool' plus 'default X'.
'def_bool' is redundant where 'bool' is already present, so 'def_bool X'
can be replaced with 'default X', or removed if X is 'n'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
We need the serial/tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the driver core changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some driver core fixes, a kobject fix, and a documentation
update for 6.8-rc5. In detail these changes are:
- devlink fixes for reported issues with 6.8-rc1
- topology scheduling regression fix that has been reported by many
- kobject loosening of checks change in -rc1 is now reverted as some
codepaths seemed to need the checks
- documentation update for the CVE process. Has been reviewed by
many, the last minute change to the document was to bring the .rst
format back into the the new style rules, the contents did not
change.
All of these, except for the documentation update, have been in
linux-next for over a week. The documentation update has been reviewed
for weeks by a group of developers, and in public for a week and the
wording has stabilized for now. If future changes are needed, we can
do so before 6.8-final is out (or anytime after that)"
* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: Document the Linux Kernel CVE process
Revert "kobject: Remove redundant checks for whether ktype is NULL"
driver core: fw_devlink: Improve logs for cycle detection
driver core: fw_devlink: Improve detection of overlapping cycles
driver core: Fix device_link_flag_is_sync_state_only()
topology: Set capacity_freq_ref in all cases
|
|
This is a followup of commit a3498436b3a0 ("netns: restrict uevents")
- uevent_sock_mutex no longer protects uevent_seqnum thanks
to prior patch in the series.
- uevent_net_broadcast() can run without holding uevent_sock_mutex.
- Instead of grabbing uevent_sock_mutex before calling
kobject_uevent_net_broadcast(), we can move the
mutex_lock(&uevent_sock_mutex) to the place we iterate over
uevent_sock_list : uevent_net_broadcast_untagged().
After this patch, typical netdevice creations and destructions
calling uevent_net_broadcast_tagged() no longer need to acquire
uevent_sock_mutex.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20240214084829.684541-3-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We will soon no longer acquire uevent_sock_mutex
for most kobject_uevent_net_broadcast() calls,
and also while calling uevent_net_broadcast().
Make uevent_seqnum an atomic64_t to get its own protection.
This fixes a race while reading /sys/kernel/uevent_seqnum.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christian Brauner <brauner@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20240214084829.684541-2-edumazet@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the #ifndef that didn't have the 'CONFIG_' prefix on
HAVE_DYNAMIC_FTRACE_WITH_REGS
The fix to have dynamic trampolines work with x86 broke arm64 as the
config used in the #ifdef was HAVE_DYNAMIC_FTRACE_WITH_REGS and not
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS which removed the fix that the
previous fix was to fix.
- Fix tracing_on state
The code to test if "tracing_on" is set incorrectly used
ring_buffer_record_is_on() which returns false if the ring buffer
isn't able to be written to.
But the ring buffer disable has several bits that disable it. One is
internal disabling which is used for resizing and other modifications
of the ring buffer. But the "tracing_on" user space visible flag
should only report if tracing is actually on and not internally
disabled, as this can cause confusion as writing "1" when it is
disabled will not enable it.
Instead use ring_buffer_record_is_set_on() which shows the user space
visible settings.
- Fix a false positive kmemleak on saved cmdlines
Now that the saved_cmdlines structure is allocated via alloc_page()
and not via kmalloc() it has become invisible to kmemleak. The
allocation done to one of its pointers was flagged as a dangling
allocation leak. Make kmemleak aware of this allocation and free.
- Fix synthetic event dynamic strings
An update that cleaned up the synthetic event code removed the return
value of trace_string(), and had it return zero instead of the
length, causing dynamic strings in the synthetic event to always have
zero size.
- Clean up documentation and header files for seq_buf
* tag 'trace-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
seq_buf: Fix kernel documentation
seq_buf: Don't use "proxy" headers
tracing/synthetic: Fix trace_string() return value
tracing: Inform kmemleak of saved_cmdlines allocation
tracing: Use ring_buffer_record_is_set_on() in tracer_tracing_is_on()
tracing: Fix HAVE_DYNAMIC_FTRACE_WITH_REGS ifdef
|
|
Move the s390 specific raid6 inline assemblies, make them generic, and
reuse them to implement the raid6 gen/xor implementation.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The kernel_fpu structure has a quite large size of 520 bytes. In order to
reduce stack footprint introduce several kernel fpu structures with
different and also smaller sizes. This way every kernel fpu user must use
the correct variant. A compile time check verifies that the correct variant
is used.
There are several users which use only 16 instead of all 32 vector
registers. For those users the new kernel_fpu_16 structure with a size of
only 266 bytes can be used.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Move, rename, and merge the fpu and vx header files. This way fpu header
files have a consistent naming scheme (fpu*.h).
Also get rid of the fpu subdirectory and move header files to asm
directory, so that all fpu and vx header files can be found at the same
location.
Merge internal.h header file into other header files, since the internal
helpers are used at many locations. so those helper functions are really
not internal.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
net/core/dev.c
9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()")
723de3ebef03 ("net: free altname using an RCU callback")
net/unix/garbage.c
11498715f266 ("af_unix: Remove io_uring code for GC.")
25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.")
drivers/net/ethernet/renesas/ravb_main.c
ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path"
)
c2da9408579d ("ravb: Add Rx checksum offload support for GbEth")
net/mptcp/protocol.c
bdd70eb68913 ("mptcp: drop the push_pending field")
28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are plenty of issues with the kernel documentation here:
- misspelled word "sequence"
- different style of returned value descriptions
- missed Return sections
- unaligned style of ASCII / NUL-terminated / etc
- wrong function references
Fix all these.
Link: https://lkml.kernel.org/r/20240215152506.598340-1-andriy.shevchenko@linux.intel.com
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Link: https://lkml.kernel.org/r/20240215142255.400264-1-andriy.shevchenko@linux.intel.com
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fix from Shuah Khan:
"One important fix to unregister kunit_bus when KUnit module is
unloaded.
Not doing so causes an error when KUnit module tries to re-register
the bus when it gets reloaded"
* tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: device: Unregister the kunit_bus on shutdown
|
|
The pcim_*() functions in lib/devres.c are guarded by an #ifdef CONFIG_PCI
and, thus, don't belong to this file. They are only ever used for PCI and
are not generic infrastructure.
Move all pcim_*() functions in lib/devres.c to drivers/pci/devres.c.
Adjust the Makefile.
Add drivers/pci/devres.c to Documentation.
Link: https://lore.kernel.org/r/20240131090023.12331-4-pstanner@redhat.com
Suggested-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The entirety of pci_iomap.c is guarded by an #ifdef CONFIG_PCI. It,
consequently, does not belong to lib/ because it is not generic
infrastructure.
Move pci_iomap.c to drivers/pci/ and implement the necessary changes to
Makefiles and Kconfigs.
Update MAINTAINERS file.
Update Documentation.
Link: https://lore.kernel.org/r/20240131090023.12331-3-pstanner@redhat.com
[bhelgaas: squash in https://lore.kernel.org/r/20240212150934.24559-1-pstanner@redhat.com]
Suggested-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
|
|
Code sections in s390 specific kernel code which use floating point or
vector registers all come with a 520 byte stack variable to save already in
use registers, if required.
With INIT_STACK_ALL_PATTERN or INIT_STACK_ALL_ZERO enabled this variable
will always be initialized on function entry in addition to saving register
contents, which contradicts the intention (performance improvement) of such
code sections.
Therefore provide a DECLARE_KERNEL_FPU_ONSTACK() macro which provides
struct kernel_fpu variables with an __uninitialized attribute, and convert
all existing code to use this.
This way only this specific type of stack variable will not be initialized,
regardless of config options.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240205154844.3757121-3-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
This reverts commit 1b28cb81dab7c1eedc6034206f4e8d644046ad31.
It is reported to cause problems, so revert it for now until the root
cause can be found.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: 1b28cb81dab7 ("kobject: Remove redundant checks for whether ktype is NULL")
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Closes: https://lore.kernel.org/oe-lkp/202402071403.e302e33a-oliver.sang@intel.com
Link: https://lore.kernel.org/r/2024020849-consensus-length-6264@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dump_stack() is called in panic(). If for some reason another CPU
is holding the printk_cpu_sync and is unable to release it, the
panic CPU will be unable to continue and print the stacktrace.
Since non-panic CPUs are not allowed to store new printk messages
anyway, there is no need to synchronize the stacktrace output in
a panic situation.
For the panic CPU, do not get the printk_cpu_sync because it is
not needed and avoids a potential deadlock scenario in panic().
Link: https://lore.kernel.org/lkml/ZcIGKU8sxti38Kok@alley
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240207134103.1357162-15-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
If KUnit is built as a module, and it's unloaded, the kunit_bus is not
unregistered. This causes an error if it's then re-loaded later, as we
try to re-register the bus.
Unregister the bus and root_device on shutdown, if it looks valid.
In addition, be more specific about the value of kunit_bus_device. It
is:
- a valid struct device* if the kunit_bus initialised correctly.
- an ERR_PTR if it failed to initialise.
- NULL before initialisation and after shutdown.
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
For simplicity in splitting out UBSan options into separate rules,
remove CONFIG_UBSAN_SANITIZE_ALL, effectively defaulting to "y", which
is how it is generally used anyway. (There are no ":= y" cases beyond
where a specific file is enabled when a top-level ":= n" is in effect.)
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: linux-doc@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Silence a handful of W=1 warnings in the UBSan selftest, which set
variables without using them. For example:
lib/test_ubsan.c:101:6: warning: variable 'val1' set but not used [-Wunused-but-set-variable]
101 | int val1 = 10;
| ^
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401310423.XpCIk6KO-lkp@intel.com/
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
lib/test_blackhole_dev.c sets a variable that is never read, causing
this following building warning:
lib/test_blackhole_dev.c:32:17: warning: variable 'ethh' set but not used [-Wunused-but-set-variable]
Remove the variable struct ethhdr *ethh, which is unused.
Fixes: 509e56b37cc3 ("blackhole_dev: add a selftest")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix all kernel-doc warnings in test_kmod.c:
- Mark some enum values as private so that kernel-doc is not needed
for them
- s/thread_mutex/thread_lock/ in a struct's kernel-doc comments
- add kernel-doc info for @task_sync
test_kmod.c:67: warning: Enum value '__TEST_KMOD_INVALID' not described in enum 'kmod_test_case'
test_kmod.c:67: warning: Enum value '__TEST_KMOD_MAX' not described in enum 'kmod_test_case'
test_kmod.c:100: warning: Function parameter or member 'task_sync' not described in 'kmod_test_device_info'
test_kmod.c:134: warning: Function parameter or member 'thread_mutex' not described in 'kmod_test_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: <linux-modules@vger.kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
The loop counter "i" in copy_compat_iovec_from_user() is an int, but
because the nr_segs argument is unsigned long, the signed overflow
sanitizer got worried "i" could wrap around. Instead of making "i" an
unsigned long (which may enlarge the type size), switch both nr_segs
and i to u32. There is no truncation with nr_segs since it is never
larger than UIO_MAXIOV anyway. This keeps sanitizer instrumentation[1]
out of a UACCESS path:
vmlinux.o: warning: objtool: copy_compat_iovec_from_user+0xa9: call to __ubsan_handle_add_overflow() with UACCESS enabled
Link: https://github.com/KSPP/linux/issues/26 [1]
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240129183729.work.991-kees@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This diff uses an open source tool include-what-you-use (IWYU) to modify
the include list, changing indirect includes to direct includes. IWYU is
implemented using the IWYUScripts github repository which is a tool that
is currently undergoing development. These changes seek to improve build
times.
This change to lib/string.c resulted in a preprocessed size of
lib/string.i from 26371 lines to 5321 lines (-80%) for the x86
defconfig.
Link: https://github.com/ClangBuiltLinux/IWYUScripts
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231226-libstringheader-v6-2-80aa08c7652c@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Similarly to cpumask_weight_and(), cpumask_weight_andnot() is a handy
helper that may help to avoid creating an intermediate mask just to
calculate number of bits that set in a 1st given mask, and clear in 2nd
one.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The #ifdef ARCH_HAS_GENERIC_IOPORT_MAP accidentally also guards iounmap(),
which means MMIO mappings are leaked.
Move the guard so we call iounmap() for MMIO mappings.
Fixes: 316e8d79a095 ("pci_iounmap'2: Electric Boogaloo: try to make sense of it all")
Link: https://lore.kernel.org/r/20240131090023.12331-2-pstanner@redhat.com
Reported-by: Danilo Krummrich <dakr@redhat.com>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org> # v5.15+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"NULL vs IS_ERR() bug fixes, documentation update, MAINTAINERS file
update to add Rae Moar as a reviewer, and a fix to run test suites
only after module initialization completes"
* tag 'linux_kselftest-kunit-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Update the instructions on how to test static functions
kunit: run test suites only after module initialization completes
MAINTAINERS: kunit: Add Rae Moar as a reviewer
kunit: device: Fix a NULL vs IS_ERR() check in init()
kunit: Fix a NULL vs IS_ERR() bug
|
|
The config HW_CONSOLE is always identical to the config VT and is not
visible in the kernel's build menuconfig. So, CONFIG_HW_CONSOLE is
redundant.
Replace all references to CONFIG_HW_CONSOLE with CONFIG_VT and remove
CONFIG_HW_CONSOLE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20240108134102.601-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With the introduction of the pool_rwlock (reader-writer lock), several
fast paths end up taking the pool_rwlock as readers. Furthermore,
stack_depot_put() unconditionally takes the pool_rwlock as a writer.
Despite allowing readers to make forward-progress concurrently,
reader-writer locks have inherent cache contention issues, which does not
scale well on systems with large CPU counts.
Rework the synchronization story of stack depot to again avoid taking any
locks in the fast paths. This is done by relying on RCU-protected list
traversal, and the NMI-safe subset of RCU to delay reuse of freed stack
records. See code comments for more details.
Along with the performance issues, this also fixes incorrect nesting of
rwlock within a raw_spinlock, given that stack depot should still be
usable from anywhere:
| [ BUG: Invalid wait context ]
| -----------------------------
| swapper/0/1 is trying to lock:
| ffffffff89869be8 (pool_rwlock){..--}-{3:3}, at: stack_depot_save_flags
| other info that might help us debug this:
| context-{5:5}
| 2 locks held by swapper/0/1:
| #0: ffffffff89632440 (rcu_read_lock){....}-{1:3}, at: __queue_work
| #1: ffff888100092018 (&pool->lock){-.-.}-{2:2}, at: __queue_work <-- raw_spin_lock
Stack depot usage stats are similar to the previous version after a KASAN
kernel boot:
$ cat /sys/kernel/debug/stackdepot/stats
pools: 838
allocations: 29865
frees: 6604
in_use: 23261
freelist_size: 1879
The number of pools is the same as previously. The freelist size is
minimally larger, but this may also be due to variance across system
boots. This shows that even though we do not eagerly wait for the next
RCU grace period (such as with synchronize_rcu() or call_rcu()) after
freeing a stack record - requiring depot_pop_free() to "poll" if an entry
may be used - new allocations are very likely to happen in later RCU grace
periods.
Link: https://lkml.kernel.org/r/20240118110216.2539519-2-elver@google.com
Fixes: 108be8def46e ("lib/stackdepot: allow users to evict stack traces")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a few basic stats counters for stack depot that can be used to derive
if stack depot is working as intended. This is a snapshot of the new
stats after booting a system with a KASAN-enabled kernel:
$ cat /sys/kernel/debug/stackdepot/stats
pools: 838
allocations: 29861
frees: 6561
in_use: 23300
freelist_size: 1840
Generally, "pools" should be well below the max; once the system is
booted, "in_use" should remain relatively steady.
Link: https://lkml.kernel.org/r/20240118110216.2539519-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rewrite the alignment checking iterators for iovec and bvec to be easier
to read, and also significantly more compact in terms of generated code.
This saves 270 bytes of text on x86-64 for me (with clang-18) and 224
bytes on arm64 (with gcc-13).
In profiles, also saves a bit of time as well for the same workload:
0.81% -0.18% [kernel.vmlinux] [k] iov_iter_aligned_bvec
0.48% -0.09% [kernel.vmlinux] [k] iov_iter_is_aligned
which is a nice side benefit as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/544b31f7-6d4b-42f5-a544-1420501f081f@kernel.dk
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
v2: do the other half of the iterators too, as suggested by Keith.
This further saves some text.
|
|
The modules are being moved from lib/livepatch to
tools/testing/selftests/livepatch/test_modules.
This code moving will allow writing more complex tests, like for example an
userspace C code that will call a livepatched kernel function.
The modules are now built as out-of-tree
modules, but being part of the kernel source means they will be maintained.
Another advantage of the code moving is to be able to easily change,
debug and rebuild the tests by running make on the selftests/livepatch
directory, which is not currently possible since the modules on
lib/livepatch are build and installed using the "modules" target.
The current approach also keeps the ability to execute the tests manually
by executing the scripts inside selftests/livepatch directory, as it's
currently supported. If the modules are modified, they needed to be
rebuilt before running the scripts though.
The modules are built before running the selftests when using the
kselftest invocations:
make kselftest TARGETS=livepatch
or
make -C tools/testing/selftests/livepatch run_tests
Having the modules being built as out-of-modules requires changing the
currently used 'modprobe' by 'insmod' and adapt the test scripts that
check for the kernel message buffer.
Now it is possible to only compile the modules by running:
make -C tools/testing/selftests/livepatch/
This way the test modules and other test program can be built in order
to be packaged if so desired.
As there aren't any modules being built on lib/livepatch, remove the
TEST_LIVEPATCH Kconfig and it's references.
Note: "make gen_tar" packages the pre-built binaries into the tarball.
It means that it will store the test modules pre-built for
the kernel running on the build host.
Note that these modules need not binary compatible with
the kernel built from the same sources. But the same
is true for other packaged selftest binaries.
The entire kernel sources are needed for rebuilding
the selftests on another system.
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in
kunit_free_suite_set()") fixed a wild-memory-access bug that could have
happened during the loading phase of test suites built and executed as
loadable modules. However, it also introduced a problematic side effect
that causes test suites modules to crash when they attempt to register
fake devices.
When a module is loaded, it traverses the MODULE_STATE_UNFORMED and
MODULE_STATE_COMING states before reaching the normal operating state
MODULE_STATE_LIVE. Finally, when the module is removed, it moves to
MODULE_STATE_GOING before being released. However, if the loading
function load_module() fails between complete_formation() and
do_init_module(), the module goes directly from MODULE_STATE_COMING to
MODULE_STATE_GOING without passing through MODULE_STATE_LIVE.
This behavior was causing kunit_module_exit() to be called without
having first executed kunit_module_init(). Since kunit_module_exit() is
responsible for freeing the memory allocated by kunit_module_init()
through kunit_filter_suites(), this behavior was resulting in a
wild-memory-access bug.
Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in
kunit_free_suite_set()") fixed this issue by running the tests when the
module is still in MODULE_STATE_COMING. However, modules in that state
are not fully initialized, lacking sysfs kobjects. Therefore, if a test
module attempts to register a fake device, it will inevitably crash.
This patch proposes a different approach to fix the original
wild-memory-access bug while restoring the normal module execution flow
by making kunit_module_exit() able to detect if kunit_module_init() has
previously initialized the tests suite set. In this way, test modules
can once again register fake devices without crashing.
This behavior is achieved by checking whether mod->kunit_suites is a
virtual or direct mapping address. If it is a virtual address, then
kunit_module_init() has allocated the suite_set in kunit_filter_suites()
using kmalloc_array(). On the contrary, if mod->kunit_suites is still
pointing to the original address that was set when looking up the
.kunit_test_suites section of the module, then the loading phase has
failed and there's no memory to be freed.
v4:
- rebased on 6.8
- noted that kunit_filter_suites() must return a virtual address
v3:
- add a comment to clarify why the start address is checked
v2:
- add include <linux/mm.h>
Fixes: 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()")
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Rae Moar <rmoar@google.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marco Pagani <marpagan@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The root_device_register() function does not return NULL, it returns
error pointers. Fix the check to match.
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The kunit_device_register() function doesn't return NULL, it returns
error pointers. Change the KUNIT_ASSERT_NOT_NULL() to check for
ERR_OR_NULL().
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull strlcpy removal from Kees Cook:
"As promised, this is 'part 2' of the hardening tree, late in -rc1 now
that all the other trees with strlcpy() removals have landed. One new
user appeared (in bcachefs) but was a trivial refactor. The kernel is
now free of the strlcpy() API!
- Remove of the final (very recent) user of strlcpy() (in bcachefs)
- Remove the strlcpy() API. Long live strscpy()"
* tag 'strlcpy-removal-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
string: Remove strlcpy()
bcachefs: Replace strlcpy() with strscpy()
|
|
With all the users of strlcpy() removed[1] from the kernel, remove the
API, self-tests, and other references. Leave mentions in Documentation
(about its deprecation), and in checkpatch.pl (to help migrate host-only
tools/ usage). Long live strscpy().
Link: https://github.com/KSPP/linux/issues/89 [1]
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The generic ipv6 checksums are only defined with CONFIG_NET=y, so gate
the test as well.
Fixes: 6f4c45cbcb00 ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401192143.jLdjbIy3-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202401192357.WU4nPRdN-lkp@intel.com/
Reviewed-By: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240119145600.3093-2-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- tcp, fc, and rdma target fixes (Maurizio, Daniel, Hannes,
Christoph)
- discard fixes and improvements (Christoph)
- timeout debug improvements (Keith, Max)
- various cleanups (Daniel, Max, Giuxen)
- trace event string fixes (Arnd)
- shadow doorbell setup on reset fix (William)
- a write zeroes quirk for SK Hynix (Jim)
- MD pull request via Song:
- Sparse warning since v6.0 (Bart)
- /proc/mdstat regression since v6.7 (Yu Kuai)
- Use symbolic error value (Christian)
- IO Priority documentation update (Christian)
- Fix for accessing queue limits without having entered the queue
(Christoph, me)
- Fix for loop dio support (Christoph)
- Move null_blk off deprecated ida interface (Christophe)
- Ensure nbd initializes full msghdr (Eric)
- Fix for a regression with the folio conversion, which is now easier
to hit because of an unrelated change (Matthew)
- Remove redundant check in virtio-blk (Li)
- Fix for a potential hang in sbitmap (Ming)
- Fix for partial zone appending (Damien)
- Misc changes and fixes (Bart, me, Kemeng, Dmitry)
* tag 'for-6.8/block-2024-01-18' of git://git.kernel.dk/linux: (45 commits)
Documentation: block: ioprio: Update schedulers
loop: fix the the direct I/O support check when used on top of block devices
blk-mq: Remove the hctx 'run' debugfs attribute
nbd: always initialize struct msghdr completely
block: Fix iterating over an empty bio with bio_for_each_folio_all
block: bio-integrity: fix kcalloc() arguments order
virtio_blk: remove duplicate check if queue is broken in virtblk_done
sbitmap: remove stale comment in sbq_calc_wake_batch
block: Correct a documentation comment in blk-cgroup.c
null_blk: Remove usage of the deprecated ida_simple_xx() API
block: ensure we hold a queue reference when using queue limits
blk-mq: rename blk_mq_can_use_cached_rq
block: print symbolic error name instead of error code
blk-mq: fix IO hang from sbitmap wakeup race
nvmet-rdma: avoid circular locking dependency on install_queue()
nvmet-tcp: avoid circular locking dependency on install_queue()
nvme-pci: set doorbell config before unquiescing
block: fix partial zone append completion handling in req_bio_endio()
block/iocost: silence warning on 'last_period' potentially being unused
md/raid1: Use blk_opf_t for read and write operations
...
|
|
Pull CXL (Compute Express Link) updates from Dan Williams:
"The bulk of this update is support for enumerating the performance
capabilities of CXL memory targets and connecting that to a platform
CXL memory QoS class. Some follow-on work remains to hook up this data
into core-mm policy, but that is saved for v6.9.
The next significant update is unifying how CXL event records (things
like background scrub errors) are processed between so called
"firmware first" and native error record retrieval. The CXL driver
handler that processes the record retrieved from the device mailbox is
now the handler for that same record format coming from an EFI/ACPI
notification source.
This also contains miscellaneous feature updates, like Get Timestamp,
and other fixups.
Summary:
- Add support for parsing the Coherent Device Attribute Table (CDAT)
- Add support for calculating a platform CXL QoS class from CDAT data
- Unify the tracing of EFI CXL Events with native CXL Events.
- Add Get Timestamp support
- Miscellaneous cleanups and fixups"
* tag 'cxl-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (41 commits)
cxl/core: use sysfs_emit() for attr's _show()
cxl/pci: Register for and process CPER events
PCI: Introduce cleanup helpers for device reference counts and locks
acpi/ghes: Process CXL Component Events
cxl/events: Create a CXL event union
cxl/events: Separate UUID from event structures
cxl/events: Remove passing a UUID to known event traces
cxl/events: Create common event UUID defines
cxl/events: Promote CXL event structures to a core header
cxl: Refactor to use __free() for cxl_root allocation in cxl_endpoint_port_probe()
cxl: Refactor to use __free() for cxl_root allocation in cxl_find_nvdimm_bridge()
cxl: Fix device reference leak in cxl_port_perf_data_calculate()
cxl: Convert find_cxl_root() to return a 'struct cxl_root *'
cxl: Introduce put_cxl_root() helper
cxl/port: Fix missing target list lock
cxl/port: Fix decoder initialization when nr_targets > interleave_ways
cxl/region: fix x9 interleave typo
cxl/trace: Pass UUID explicitly to event traces
cxl/region: use %pap format to print resource_size_t
cxl/region: Add dev_dbg() detail on failure to allocate HPA space
...
|
|
Nathan Chancellor <nathan@kernel.org> says:
This series disables DWARF5 for LLVM versions where it is known to be
broken due to linker relaxation.
* b4-shazam-merge:
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
Link: https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6
Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-0-aedf00a382ac@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Fangrui noted that the comment around CONFIG_AS_HAS_NON_CONST_LEB128
could be made more accurate because explicit .sleb128 directives are not
emitted, only .uleb128 directives are. Rename the symbol to
CONFIG_AS_HAS_NON_CONST_ULEB128 as a result.
Further clarifications include replacing "symbol deltas" with the more
accurate "label differences", noting that this issue has been resolved
in newer binutils (2.41+), and it only occurs when a port uses RISC-V
style linker relaxation.
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-3-aedf00a382ac@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
LLVM prior to 18.0.0 would generate incorrect debug info for DWARF5 due
to linker relaxation, which was worked around in clang by defaulting
RISC-V to DWARF4 [1]. Unfortunately, this workaround does not work for
the kernel because the DWARF version can be independently changed from
the default in Kconfig.
Do not allow DWARF5 to be selected for RISC-V when using linker
relaxation (ld.lld >= 15.0.0) and a version of LLVM that does not have
the fixes (the integrated assembler [2] and ld.lld [3] < 18.0.0)
necessary to generate the correct debug info.
Link: https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6 [1]
Link: https://github.com/llvm/llvm-project/commit/1df5ea29b43690b6622db2cad7b745607ca4de6a [2]
Link: https://github.com/llvm/llvm-project/commit/7ffabb61a5569444b5ac9322e22e5471cc5e4a77 [3]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20231205-riscv-restrict-dwarf5-llvm-v2-2-aedf00a382ac@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Supplement existing checksum tests with tests for csum_ipv6_magic and
ip_fast_csum.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240108-optimize_checksum-v15-5-1c50de5f2167@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"For once not mostly MM-related.
17 hotfixes. 10 address post-6.7 issues and the other 7 are cc:stable"
* tag 'mm-hotfixes-stable-2024-01-12-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
userfaultfd: avoid huge_zero_page in UFFDIO_MOVE
MAINTAINERS: add entry for shrinker
selftests: mm: hugepage-vmemmap fails on 64K page size systems
mm/memory_hotplug: fix memmap_on_memory sysfs value retrieval
mailmap: switch email for Tanzir Hasan
mailmap: add old address mappings for Randy
kernel/crash_core.c: make __crash_hotplug_lock static
efi: disable mirror feature during crashkernel
kexec: do syscore_shutdown() in kernel_kexec
mailmap: update entry for Manivannan Sadhasivam
fs/proc/task_mmu: move mmu notification mechanism inside mm lock
mm: zswap: switch maintainers to recently active developers and reviewers
scripts/decode_stacktrace.sh: optionally use LLVM utilities
kasan: avoid resetting aux_lock
lib/Kconfig.debug: disable CONFIG_DEBUG_INFO_BTF for Hexagon
MAINTAINERS: update LTP maintainers
kdump: defer the insertion of crashkernel resources
|
|
After commit 106397376c036 ("sbitmap: fix batching wakeup"), we may wake
up more than one queue for each batch. Just remove stale comment that
we wake up only one queue for each batch.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20240115145626.665562-1-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
pahole, which generates BTF, relies on elfutils to process DWARF debug
info. Because kernel modules are relocatable files, elfutils needs to
resolve relocations when processing the DWARF .debug sections.
Hexagon is not supported in binutils or elfutils, so elfutils is unable to
process relocations in kernel modules, causing pahole to crash during BTF
generation.
Do not allow CONFIG_DEBUG_INFO_BTF to be selected for Hexagon until it is
supported in elfutils, so that there are no more cryptic build failures
during BTF generation.
Link: https://lkml.kernel.org/r/20240105-hexagon-disable-btf-v1-1-ddab073e7f74@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312192107.wMIKiZWw-lkp@intel.com/
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Brian Cain <bcain@quicinc.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Add machine variable capacity information to /proc/sysinfo.
- Limit the waste of page tables and always align vmalloc area size and
base address on segment boundary.
- Fix a memory leak when an attempt to register interruption sub class
(ISC) for the adjunct-processor (AP) guest failed.
- Reset response code AP_RESPONSE_INVALID_GISA to understandable by
guest AP_RESPONSE_INVALID_ADDRESS in response to a failed
interruption sub class (ISC) registration attempt.
- Improve reaction to adjunct-processor (AP)
AP_RESPONSE_OTHERWISE_CHANGED response code when enabling interrupts
on behalf of a guest.
- Fix incorrect sysfs 'status' attribute of adjunct-processor (AP)
queue device bound to the vfio_ap device driver when the mediated
device is attached to a guest, but the queue device is not passed
through.
- Rework struct ap_card to hold the whole adjunct-processor (AP) card
hardware information. As result, all the ugly bit checks are replaced
by simple evaluations of the required bit fields.
- Improve handling of some weird scenarios between service element (SE)
host and SE guest with adjunct-processor (AP) pass-through support.
- Change local_ctl_set_bit() and local_ctl_clear_bit() so they return
the previous value of the to be changed control register. This is
useful if a bit is only changed temporarily and the previous content
needs to be restored.
- The kernel starts with machine checks disabled and is expected to
enable it once trap_init() is called. However the implementation
allows machine checks early. Consistently enable it in trap_init()
only.
- local_mcck_disable() and local_mcck_enable() assume that machine
checks are always enabled. Instead implement and use
local_mcck_save() and local_mcck_restore() to disable machine checks
and restore the previous state.
- Modification of floating point control (FPC) register of a traced
process using ptrace interface may lead to corruption of the FPC
register of the tracing process. Fix this.
- kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point
control (FPC) register in vCPU, but may lead to corruption of the FPC
register of the host process. Fix this.
- Use READ_ONCE() to read a vCPU floating point register value from the
memory mapped area. This avoids that, depending on code generation, a
different value is tested for validity than the one that is used.
- Get rid of test_fp_ctl(), since it is quite subtle to use it
correctly. Instead copy a new floating point control register value
into its save area and test the validity of the new value when
loading it.
- Remove superfluous save_fpu_regs() call.
- Remove s390 support for ARCH_WANTS_DYNAMIC_TASK_STRUCT. All machines
provide the vector facility since many years and the need to make the
task structure size dependent on the vector facility does not exist.
- Remove the "novx" kernel command line option, as the vector code runs
without any problems since many years.
- Add the vector facility to the z13 architecture level set (ALS). All
hypervisors support the vector facility since many years. This allows
compile time optimizations of the kernel.
- Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx(). As
result, the compiled code will have less runtime checks and less
code.
- Convert pgste_get_lock() and pgste_set_unlock() ASM inlines to C.
- Convert the struct subchannel spinlock from pointer to member.
* tag 's390-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits)
Revert "s390: update defconfigs"
s390/cio: make sch->lock spinlock pointer a member
s390: update defconfigs
s390/mm: convert pgste locking functions to C
s390/fpu: get rid of MACHINE_HAS_VX
s390/als: add vector facility to z13 architecture level set
s390/fpu: remove "novx" option
s390/fpu: remove ARCH_WANTS_DYNAMIC_TASK_STRUCT support
KVM: s390: remove superfluous save_fpu_regs() call
s390/fpu: get rid of test_fp_ctl()
KVM: s390: use READ_ONCE() to read fpc register value
KVM: s390: fix setting of fpc register
s390/ptrace: handle setting of fpc register correctly
s390/nmi: implement and use local_mcck_save() / local_mcck_restore()
s390/nmi: consistently enable machine checks in trap_init()
s390/ctlreg: return old register contents when changing bits
s390/ap: handle outband SE bind state change
s390/ap: store TAPQ hwinfo in struct ap_card
s390/vfio-ap: fix sysfs status attribute for AP queue devices
s390/vfio-ap: improve reaction to response code 07 from PQAP(AQIC) command
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work.
In the v6.6 kernel we got the major infrastructure changes required to
support this. For v6.7 we had all arch/ and drivers/ modified to
remove the sentinel. For v6.8-rc1 we get a few more updates for fs/
directory only.
The kernel/ directory is left but we'll save that for v6.9-rc1 as
those patches are still being reviewed. After that we then can expect
also the removal of the no longer needed check for procname == NULL.
Let us recap the purpose of this work:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to
see further work by Thomas Weißschuh with the constificatin of the
struct ctl_table.
Due to Joel Granados's work, and to help bring in new blood, I have
suggested for him to become a maintainer and he's accepted. So for
v6.9-rc1 I look forward to seeing him sent you a pull request for
further sysctl changes. This also removes Iurii Zaikin as a maintainer
as he has moved on to other projects and has had no time to help at
all"
* tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
sysctl: remove struct ctl_path
sysctl: delete unused define SYSCTL_PERM_EMPTY_DIR
coda: Remove the now superfluous sentinel elements from ctl_table array
sysctl: Remove the now superfluous sentinel elements from ctl_table array
fs: Remove the now superfluous sentinel elements from ctl_table array
cachefiles: Remove the now superfluous sentinel element from ctl_table array
sysclt: Clarify the results of selftest run
sysctl: Add a selftest for handling empty dirs
sysctl: Fix out of bounds access for empty sysctl registers
MAINTAINERS: Add Joel Granados as co-maintainer for proc sysctl
MAINTAINERS: remove Iurii Zaikin from proc sysctl
|
|
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add incremental lskcipher/skcipher processing
Algorithms:
- Remove SHA1 from drbg
- Remove CFB and OFB
Drivers:
- Add comp high perf mode configuration in hisilicon/zip
- Add support for 420xx devices in qat
- Add IAA Compression Accelerator driver"
* tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (172 commits)
crypto: iaa - Account for cpu-less numa nodes
crypto: scomp - fix req->dst buffer overflow
crypto: sahara - add support for crypto_engine
crypto: sahara - remove error message for bad aes request size
crypto: sahara - remove unnecessary NULL assignments
crypto: sahara - remove 'active' flag from sahara_aes_reqctx struct
crypto: sahara - use dev_err_probe()
crypto: sahara - use devm_clk_get_enabled()
crypto: sahara - use BIT() macro
crypto: sahara - clean up macro indentation
crypto: sahara - do not resize req->src when doing hash operations
crypto: sahara - fix processing hash requests with req->nbytes < sg->length
crypto: sahara - improve error handling in sahara_sha_process()
crypto: sahara - fix wait_for_completion_timeout() error handling
crypto: sahara - fix ahash reqsize
crypto: sahara - handle zero-length aes requests
crypto: skcipher - remove excess kerneldoc members
crypto: shash - remove excess kerneldoc members
crypto: qat - generate dynamically arbiter mappings
crypto: qat - add support for ring pair level telemetry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- a new feature that adds APIs for managing devices introducing a set
of helper functions which allow devices (internally a struct
kunit_device) to be created and managed by KUnit.
These devices will be automatically unregistered on test exit. These
helpers can either use a user-provided struct device_driver, or have
one automatically created and managed by KUnit. In both cases, the
device lives on a new kunit_bus.
- changes to switch drm/tests to use kunit devices
- several fixes and enhancements to attribute feature
- changes to reorganize deferred action function introducing
KUNIT_DEFINE_ACTION_WRAPPER
- new feature adds ability to run tests after boot using debugfs
- fixes and enhancements to string-stream-test:
- parse ERR_PTR in string_stream_destroy()
- unchecked dereference in bug fix in debugfs_print_results()
- handling errors from alloc_string_stream()
- NULL-dereference bug fix in kunit_init_suite()
* tag 'linux_kselftest-kunit-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (27 commits)
kunit: Fix some comments which were mistakenly kerneldoc
kunit: Protect string comparisons against NULL
kunit: Add example of kunit_activate_static_stub() with pointer-to-function
kunit: Allow passing function pointer to kunit_activate_static_stub()
kunit: Fix NULL-dereference in kunit_init_suite() if suite->log is NULL
kunit: Reset test->priv after each param iteration
kunit: Add example for using test->priv
drm/tests: Switch to kunit devices
ASoC: topology: Replace fake root_device with kunit_device in tests
overflow: Replace fake root_device with kunit_device
fortify: test: Use kunit_device
kunit: Add APIs for managing devices
Documentation: Add debugfs docs with run after boot
kunit: add ability to run tests after boot using debugfs
kunit: add is_init test attribute
kunit: add example suite to test init suites
kunit: add KUNIT_INIT_TABLE to init linker section
kunit: move KUNIT_TABLE out of INIT_DATA
kunit: tool: add test for parsing attributes
kunit: tool: fix parsing of test attributes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"From the new features standpoint, the most significant change here is
the addition of CSI-2 and MIPI DisCo for Imaging support to the ACPI
device enumeration code that will allow MIPI cameras to be enumerated
through the platform firmware on systems using ACPI.
Also significant is the switch-over to threaded interrupt handlers for
the ACPI SCI and the dedicated EC interrupt (on systems where the
former is not used) which essentially allows all ACPI code to run with
local interrupts enabled. That should improve responsiveness
significantly on systems where multiple GPEs are enabled and the
handling of one SCI involves many I/O address space accesses which
previously had to be carried out in one go with disabled interrupts on
the local CPU.
Apart from the above, the ACPI thermal zone driver will use the
Thermal fast Sampling Period (_TFP) object if available, which should
allow temperature changes to be followed more accurately on some
systems, the ACPI Notify () handlers can run on all CPUs (not just on
CPU0), which should generally speed up the processing of events
signaled through the ACPI SCI, and the ACPI power button driver will
trigger wakeup key events via the input subsystem (on systems where it
is a system wakeup device)
In addition to that, there are the usual bunch of fixes and cleanups.
Specifics:
- Add CSI-2 and DisCo for Imaging support to the ACPI device
enumeration code (Sakari Ailus, Rafael J. Wysocki)
- Adjust the cpufreq thermal reduction algorithm in the ACPI
processor driver for Tegra241 (Srikar Srimath Tirumala, Arnd
Bergmann)
- Make acpi_proc_quirk_mwait_check() x86-specific (Rafael J. Wysocki)
- Switch over ACPI to using a threaded interrupt handler for the SCI
(Rafael J. Wysocki)
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki)
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki)
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock
to keep local interrupts on (Rafael J. Wysocki)
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg)
- Correct and clean up the generic function for parsing ACPI
data-only tables with array structure (Yuntao Wang)
- Modify acpi_dev_uid_match() to support different types of its
second argument and adjust its users accordingly (Raag Jadav)
- Clean up code related to acpi_evaluate_reference() and ACPI device
lists (Rafael J. Wysocki)
- Use generic ACPI helpers for evaluating trip point temperature
objects in the ACPI thermal zone driver (Rafael J. Wysockii, Arnd
Bergmann)
- Add Thermal fast Sampling Period (_TFP) support to the ACPI thermal
zone driver (Jeff Brasen)
- Modify the ACPI LPIT table handling code to avoid u32
multiplication overflows in state residency computations (Nikita
Kiryushin)
- Drop an unused helper function from the ACPI backlight (video)
driver and add a clarifying comment to it (Hans de Goede)
- Update the ACPI backlight driver to avoid using uninitialized
memory in some cases (Nikita Kiryushin)
- Add ACPI backlight quirk for the Colorful X15 AT 23 laptop (Yuluo
Qiu)
- Add support for vendor-defined error types to the ACPI APEI error
injection code (Avadhut Naik)
- Adjust APEI to properly set MF_ACTION_REQUIRED on synchronous
memory failure events, so they are handled differently from the
asynchronous ones (Shuai Xue)
- Fix NULL pointer dereference check in the ACPI extlog driver
(Prarit Bhargava)
- Adjust the ACPI extlog driver to clear the Extended Error Log
status when RAS_CEC handled the error (Tony Luck)
- Add IRQ override quirks for some Infinity laptops and for TongFang
GMxXGxx (David McFarland, Hans de Goede)
- Clean up the ACPI NUMA code and fix it to ensure that fake_pxm is
not the same as one of the real pxm values (Yuntao Wang)
- Fix the fractional clock divider flags in the ACPI LPSS (Intel SoC)
driver so as to prevent miscalculation of the values in the clock
divider (Andy Shevchenko)
- Adjust comments in the ACPI watchdog driver to prevent kernel-doc
from complaining during documentation builds (Randy Dunlap)
- Make the ACPI button driver send wakeup key events to user space in
addition to power button events on systems that can be woken up by
the power button (Ken Xue)
- Adjust pnpacpi_parse_allocated_vendor() to use memcpy() on a full
structure field (Dmitry Antipov)"
* tag 'acpi-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
ACPI: resource: Add Infinity laptops to irq1_edge_low_force_override
ACPI: button: trigger wakeup key events
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
ACPI: EC: Use a spin lock without disabing interrupts
ACPI: EC: Use a threaded handler for dedicated IRQ
ACPI: OSL: Use spin locks without disabling interrupts
ACPI: APEI: set memory failure flags as MF_ACTION_REQUIRED on synchronous events
ACPI: utils: Introduce helper for _DEP list lookup
ACPI: utils: Fix white space in struct acpi_handle_list definition
ACPI: utils: Refine acpi_handle_list_equal() slightly
ACPI: utils: Return bool from acpi_evaluate_reference()
ACPI: utils: Rearrange in acpi_evaluate_reference()
ACPI: arm64: export acpi_arch_thermal_cpufreq_pctg()
ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error
ACPI: LPSS: Fix the fractional clock divider flags
ACPI: NUMA: Fix the logic of getting the fake_pxm value
ACPI: NUMA: Optimize the check for the availability of node values
ACPI: NUMA: Remove unnecessary check in acpi_parse_gi_affinity()
ACPI: watchdog: fix kernel-doc warnings
ACPI: extlog: fix NULL pointer dereference check
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLUB: delayed freezing of CPU partial slabs (Chengming Zhou)
Freezing is an operation involving double_cmpxchg() that makes a slab
exclusive for a particular CPU. Chengming noticed that we use it also
in situations where we are not yet installing the slab as the CPU
slab, because freezing also indicates that the slab is not on the
shared list. This results in redundant freeze/unfreeze operation and
can be avoided by marking separately the shared list presence by
reusing the PG_workingset flag.
This approach neatly avoids the issues described in 9b1ea29bc0d7
("Revert "mm, slub: consider rest of partial list if acquire_slab()
fails"") as we can now grab a slab from the shared list in a quick
and guaranteed way without the cmpxchg_double() operation that
amplifies the lock contention and can fail.
As a result, lkp has reported 34.2% improvement of
stress-ng.rawudp.ops_per_sec
- SLAB removal and SLUB cleanups (Vlastimil Babka)
The SLAB allocator has been deprecated since 6.5 and nobody has
objected so far. We agreed at LSF/MM to wait until the next LTS,
which is 6.6, so we should be good to go now.
This doesn't yet erase all traces of SLAB outside of mm/ so some dead
code, comments or documentation remain, and will be cleaned up
gradually (some series are already in the works).
Removing the choice of allocators has already allowed to simplify and
optimize the code wiring up the kmalloc APIs to the SLUB
implementation.
* tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm/slub: free KFENCE objects in slab_free_hook()
mm/slub: handle bulk and single object freeing separately
mm/slub: introduce __kmem_cache_free_bulk() without free hooks
mm/slub: fix bulk alloc and free stats
mm/slub: optimize free fast path code layout
mm/slub: optimize alloc fastpath code layout
mm/slub: remove slab_alloc() and __kmem_cache_alloc_lru() wrappers
mm/slab: move kmalloc() functions from slab_common.c to slub.c
mm/slab: move kmalloc_slab() to mm/slab.h
mm/slab: move kfree() from slab_common.c to slub.c
mm/slab: move struct kmem_cache_node from slab.h to slub.c
mm/slab: move memcg related functions from slab.h to slub.c
mm/slab: move pre/post-alloc hooks from slab.h to slub.c
mm/slab: consolidate includes in the internal mm/slab.h
mm/slab: move the rest of slub_def.h to mm/slab.h
mm/slab: move struct kmem_cache_cpu declaration to slub.c
mm/slab: remove mm/slab.c and slab_def.h
mm/mempool/dmapool: remove CONFIG_DEBUG_SLAB ifdefs
mm/slab: remove CONFIG_SLAB code from slab common code
cpu/hotplug: remove CPUHP_SLAB_PREPARE hooks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobject update from Ingo Molnar:
- Make tracking object use more robust: it's not safe to access a
tracking object after releasing the hashbucket lock. Create a
persistent copy for debug printouts instead.
* tag 'core-debugobjects-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Stop accessing objects after releasing hash bucket lock
|
|
NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.
NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.
[kirill.shutemov@linux.intel.com: fixup for kerneldoc warning]
Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/20231228144704.14033-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iov_iter cleanups from Christian Brauner:
"This contains a minor cleanup. The patches drop an unused argument
from import_single_range() allowing to replace import_single_range()
with import_ubuf() and dropping import_single_range() completely"
* tag 'vfs-6.8.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: replace import_single_range() with import_ubuf()
iov_iter: remove unused 'iov' argument from import_single_range()
|
|
Pick up some miscellaneous fixups for v6.8.
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge low-level ACPICA interface changes, an _SB-scope _OSC handshake
update and a data-only ACPI tables parsing code update for 6.8-rc1:
- Switch over ACPI to using a threaded interrupt handler for the
SCI (Rafael J. Wysocki).
- Allow ACPI Notify () handlers to run on all CPUs and clean up the
ACPI interface for deferred events processing (Rafael J. Wysocki).
- Switch over the ACPI EC driver to using a threaded handler for the
dedicated IRQ on systems without the EC GPE (Rafael J. Wysocki).
- Adjust code using ACPICA spinlocks and the ACPI EC driver spinlock to
keep local interrupts on (Rafael J. Wysocki).
- Adjust the USB4 _OSC handshake to correctly handle cases in which
certain types of OS control are denied by the platform (Mika
Westerberg).
- Correct and clean up the generic function for parsing ACPI data-only
tables with array structure (Yuntao Wang).
* acpi-osl:
ACPI: EC: Use a spin lock without disabing interrupts
ACPI: EC: Use a threaded handler for dedicated IRQ
ACPI: OSL: Use spin locks without disabling interrupts
ACPI: OSL: Allow Notify () handlers to run on all CPUs
ACPI: OSL: Rearrange workqueue selection in acpi_os_execute()
ACPI: OSL: Rework error handling in acpi_os_execute()
ACPI: OSL: Use a threaded interrupt handler for SCI
* acpi-bus:
ACPI: Run USB4 _OSC() first with query bit set
* acpi-tables:
ACPI: tables: Correct and clean up the logic of acpi_parse_entries_array()
|
|
The KUnit device helpers are documented with kerneldoc in their header
file, but also have short comments over their implementation. These were
mistakenly formatted as kerneldoc comments, even though they're not
valid kerneldoc. It shouldn't cause any serious problems -- this file
isn't included in the docs -- but it could be confusing, and causes
warnings.
Remove the extra '*' so that these aren't treated as kerneldoc.
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312181920.H4EPAH20-lkp@intel.com/
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Adds a variant of example_static_stub_test() that shows use of a
pointer-to-function with kunit_activate_static_stub().
A const pointer to the add_one() function is declared. This
pointer-to-function is passed to kunit_activate_static_stub() and
kunit_deactivate_static_stub() instead of passing add_one directly.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
suite->log must be checked for NULL before passing it to
string_stream_clear(). This was done in kunit_init_test() but was missing
from kunit_init_suite().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 6d696c4695c5 ("kunit: add ability to run tests after boot using debugfs")
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: David Gow <davidgow@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
asm-generic/io.h can be replaced with linux/io.h and the file will still
build correctly. It is an asm-generic file which should be avoided if
possible.
Link: https://lkml.kernel.org/r/20231221-tracereadwrite-v1-1-a434f25180c7@google.com
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
crc_ccitt_false() was introduced in commit 0d85adb5fbd33 ("lib/crc-ccitt:
Add CCITT-FALSE CRC16 variant"), but it is redundant with crc_itu_t().
Since the latter is more used, it is the one being kept.
Link: https://lkml.kernel.org/r/20231219131154.748577-1-Mathis.Marion@silabs.com
Signed-off-by: Mathis Marion <mathis.marion@silabs.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>
Cc: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DEBUG_STACK_USAGE doesn't only have an influence on the output of sysrq-T
and sysrq-P, it also enables a message at process exit. See
check_stack_usage() in kernel/exit.c where this is implemented.
Link: https://lkml.kernel.org/r/20231219182808.210284-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "lib/stackdepot, kasan: fixes for stack eviction series", v3.
A few fixes for the stack depot eviction series ("stackdepot: allow
evicting stack traces").
This patch (of 5):
Stack depot functions can be called from various contexts that do
allocations, including with console locks taken. At the same time, stack
depot functions might print WARNING's or refcount-related failures.
This can cause a deadlock on console locks.
Add printk_deferred_enter/exit guards to stack depot to avoid this.
Link: https://lkml.kernel.org/r/cover.1703020707.git.andreyknvl@google.com
Link: https://lkml.kernel.org/r/82092f9040d075a161d1264377d51e0bac847e8a.1703020707.git.andreyknvl@google.com
Fixes: 108be8def46e ("lib/stackdepot: allow users to evict stack traces")
Fixes: cd11016e5f52 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Closes: https://lore.kernel.org/all/000000000000f56750060b9ad216@google.com/
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove empty sentinel element from test_table and test_table_unregister.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Basic test to ensure that empty directories can be registered and that
they in turn can serve as a base dir for other registrations.
Add one test to the sysctl selftest module. It first registers an empty
directory under "empty_add" and then uses that as a base to register
another empty dir.
The sysctl bash script then checks that "empty_add" is present and that
there an empty directory within it.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues
or are not considered backporting material"
* tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add an old address for Naoya Horiguchi
mm/memory-failure: cast index to loff_t before shifting it
mm/memory-failure: check the mapcount of the precise page
mm/memory-failure: pass the folio and the page to collect_procs()
selftests: secretmem: floor the memory size to the multiple of page_size
mm: migrate high-order folios in swap cache correctly
maple_tree: do not preallocate nodes for slot stores
mm/filemap: avoid buffered read/write race to read inconsistent data
kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset
kexec: select CRYPTO from KEXEC_FILE instead of depending on it
kexec: fix KEXEC_FILE dependencies
|
|
by moving cond_resched_rcu() to rcupdate_wait.h, we can kill another big
sched.h dependency.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The CDAT table is very similar to ACPI tables when it comes to sub-table
and entry structures. The helper functions can be also used to parse the
CDAT table. Add support to the helper functions to deal with an external
CDAT table, and also handle the endieness since CDAT can be processed by a
BE host. Export a function cdat_table_parse() for CXL driver to parse
a CDAT table.
In order to minimize ACPICA code changes, __force is being utilized to deal
with the case of a big endian (BE) host parsing a CDAT. All CDAT data
structure variables are being force casted to __leX as appropriate.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/170319615131.2212653.10932785667981494238.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Prevent refcount warning from code releasing a fwnode
* tag 'printk-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/vsprintf: Fix %pfwf when current node refcount == 0
|
|
When the mpi_ec_ctx structure is initialized, some fields are not
cleared, causing a crash when referencing the field when the
structure was released. Initially, this issue was ignored because
memory for mpi_ec_ctx is allocated with the __GFP_ZERO flag.
For example, this error will be triggered when calculating the
Za value for SM2 separately.
Fixes: d58bb7e55a8a ("lib/mpi: Introduce ec implementation to MPI library")
Cc: stable@vger.kernel.org # v6.5
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Cross-merge networking fixes after downstream PR.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
23c93c3b6275 ("bnxt_en: do not map packet buffers twice")
6d1add95536b ("bnxt_en: Modify TX ring indexing logic.")
tools/testing/selftests/net/Makefile
2258b666482d ("selftests: add vlan hw filter tests")
a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The IDA usually detects double-frees, but that detection failed to
consider the case when there are no nearby IDs allocated and so we have a
NULL bitmap rather than simply having a clear bit. Add some tests to the
test-suite to be sure we don't inadvertently reintroduce this problem.
Unfortunately they're quite noisy so include a message to disregard
the warnings.
Reported-by: Zhenghan Wang <wzhmmmmm@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The Kconfig help text for CONFIG_KCOV describes that recorded PC values
will not be stable across machines or reboots when RANDOMIZE_BASE is
selected. This was the case when KCOV was introduced in commit:
5c9a8750a6409c63 ("kernel: add kcov code coverage")
However, this changed in commit:
4983f0ab7ffaad1e ("kcov: make kcov work properly with KASLR enabled")
Since that commit KCOV always subtracts the KASLR offset from PC values,
which ensures that these are stable across machines and across reboots
even when RANDOMIZE_BASE is selected.
Unfortunately, that commit failed to update the Kconfig help text, which
still suggests disabling RANDOMIZE_BASE even though this is no longer
necessary.
Remove the stale Kconfig text.
Link: https://lkml.kernel.org/r/20231204171807.3313022-1-mark.rutland@arm.com
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the same splat markers as panic does for easier matching by external
tools scanning kernel dmesg for splats.
Link: https://lkml.kernel.org/r/20231218135339.23209-1-bp@alien8.de
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The last range stored in maple tree is typically quite large. By checking
if it exceeds the sum of the remaining ranges in that node, it is possible
to avoid checking all other gaps.
Running the maple tree test suite in user mode almost always results in a
near 100% hit rate for this optimization.
Link: https://lkml.kernel.org/r/20231215074632.82045-1-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix typos/grammar and spellos in documentation.
Link: https://lkml.kernel.org/r/20231210063839.29967-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 0de56e38b307 ("maple_tree: use maple state end for write
operations") was broken by a later patch "maple_tree: do not preallocate
nodes for slot stores". But the later patch was scheduled ahead of
0de56e38b307, for 6.7-rc.
This fixlet undoes the damage.
Fixes: 0de56e38b307 ("maple_tree: use maple state end for write operations")
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
|
|
mas_preallocate() defaults to requesting 1 node for preallocation and then
,depending on the type of store, will update the request variable. There
isn't a check for a slot store type, so slot stores are preallocating the
default 1 node. Slot stores do not require any additional nodes, so add a
check for the slot store case that will bypass node_count_gfp(). Update
the tests to reflect that slot stores do not require allocations.
User visible effects of this bug include increased memory usage from the
unneeded node that was allocated.
Link: https://lkml.kernel.org/r/20231213205058.386589-1-sidhartha.kumar@oracle.com
Fixes: 0b8bb544b1a7 ("maple_tree: update mas_preallocate() testing")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-12-18
This PR is larger than usual and contains changes in various parts
of the kernel.
The main changes are:
1) Fix kCFI bugs in BPF, from Peter Zijlstra.
End result: all forms of indirect calls from BPF into kernel
and from kernel into BPF work with CFI enabled. This allows BPF
to work with CONFIG_FINEIBT=y.
2) Introduce BPF token object, from Andrii Nakryiko.
It adds an ability to delegate a subset of BPF features from privileged
daemon (e.g., systemd) through special mount options for userns-bound
BPF FS to a trusted unprivileged application. The design accommodates
suggestions from Christian Brauner and Paul Moore.
Example:
$ sudo mkdir -p /sys/fs/bpf/token
$ sudo mount -t bpf bpffs /sys/fs/bpf/token \
-o delegate_cmds=prog_load:MAP_CREATE \
-o delegate_progs=kprobe \
-o delegate_attachs=xdp
3) Various verifier improvements and fixes, from Andrii Nakryiko, Andrei Matei.
- Complete precision tracking support for register spills
- Fix verification of possibly-zero-sized stack accesses
- Fix access to uninit stack slots
- Track aligned STACK_ZERO cases as imprecise spilled registers.
It improves the verifier "instructions processed" metric from single
digit to 50-60% for some programs.
- Fix verifier retval logic
4) Support for VLAN tag in XDP hints, from Larysa Zaremba.
5) Allocate BPF trampoline via bpf_prog_pack mechanism, from Song Liu.
End result: better memory utilization and lower I$ miss for calls to BPF
via BPF trampoline.
6) Fix race between BPF prog accessing inner map and parallel delete,
from Hou Tao.
7) Add bpf_xdp_get_xfrm_state() kfunc, from Daniel Xu.
It allows BPF interact with IPSEC infra. The intent is to support
software RSS (via XDP) for the upcoming ipsec pcpu work.
Experiments on AWS demonstrate single tunnel pcpu ipsec reaching
line rate on 100G ENA nics.
8) Expand bpf_cgrp_storage to support cgroup1 non-attach, from Yafang Shao.
9) BPF file verification via fsverity, from Song Liu.
It allows BPF progs get fsverity digest.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (164 commits)
bpf: Ensure precise is reset to false in __mark_reg_const_zero()
selftests/bpf: Add more uprobe multi fail tests
bpf: Fail uprobe multi link with negative offset
selftests/bpf: Test the release of map btf
s390/bpf: Fix indirect trampoline generation
selftests/bpf: Temporarily disable dummy_struct_ops test on s390
x86/cfi,bpf: Fix bpf_exception_cb() signature
bpf: Fix dtor CFI
cfi: Add CFI_NOSEAL()
x86/cfi,bpf: Fix bpf_struct_ops CFI
x86/cfi,bpf: Fix bpf_callback_t CFI
x86/cfi,bpf: Fix BPF JIT call
cfi: Flip headers
selftests/bpf: Add test for abnormal cnt during multi-kprobe attachment
selftests/bpf: Don't use libbpf_get_error() in kprobe_multi_test
selftests/bpf: Add test for abnormal cnt during multi-uprobe attachment
bpf: Limit the number of kprobes when attaching program to multiple kprobes
bpf: Limit the number of uprobes when attaching program to multiple uprobes
bpf: xdp: Register generic_kfunc_set with XDP programs
selftests/bpf: utilize string values for delegate_xxx mount options
...
====================
Link: https://lore.kernel.org/r/20231219000520.34178-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we run parameterized test that uses test->priv to prepare some
custom data, then value of test->priv will leak to the next param
iteration and may be unexpected. This could be easily seen if
we promote example_priv_test to parameterized test as then only
first test iteration will be successful:
$ ./tools/testing/kunit/kunit.py run \
--kunitconfig ./lib/kunit/.kunitconfig *.example_priv*
[ ] Starting KUnit Kernel (1/1)...
[ ] ============================================================
[ ] =================== example (1 subtest) ====================
[ ] ==================== example_priv_test ====================
[ ] [PASSED] example value 3
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ] test->priv == 0000000060dfe290
[ ] ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 2
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ] test->priv == 0000000060dfe290
[ ] ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 1
[ ] # example_priv_test: initializing
[ ] # example_priv_test: ASSERTION FAILED at lib/kunit/kunit-example-test.c:230
[ ] Expected test->priv == ((void *)0), but
[ ] test->priv == 0000000060dfe290
[ ] ((void *)0) == 0000000000000000
[ ] # example_priv_test: cleaning up
[ ] [FAILED] example value 0
[ ] # example_priv_test: initializing
[ ] # example_priv_test: cleaning up
[ ] # example_priv_test: pass:1 fail:3 skip:0 total:4
[ ] ================ [FAILED] example_priv_test ================
[ ] # example: initializing suite
[ ] # module: kunit_example_test
[ ] # example: exiting suite
[ ] # Totals: pass:1 fail:3 skip:0 total:4
[ ] ===================== [FAILED] example =====================
Fix that by resetting test->priv after each param iteration, in
similar way what we did for the test->status.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
In a test->priv field the user can store arbitrary data.
Add example how to use this feature in the test code.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
