Merge tag 'drm-intel-fixes-2017-05-18-1' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes

drm/i915 fixes for v4.12-rc2

* tag 'drm-intel-fixes-2017-05-18-1' of git://anongit.freedesktop.org/git/drm-intel:
  drm/i915: don't do allocate_va_range again on PIN_UPDATE
  drm/i915: Fix rawclk readout for g4x
  drm/i915: Fix runtime PM for LPE audio
  drm/i915/glk: Fix DSI "*ERROR* ULPS is still active" messages
  drm/i915/gvt: avoid unnecessary vgpu switch
  drm/i915/gvt: not to restore in-context mmio
  drm/i915/gvt: fix typo: "supporte" -> "support"

9 files changed, 35 insertions, 22 deletions

diff --git a/drivers/gpu/drm/i915/gvt/handlers.c b/drivers/gpu/drm/i915/gvt/handlers.c
index 0ad1a508e2af47..c995e540ff96e1 100644
--- a/drivers/gpu/drm/i915/gvt/handlers.c
+++ b/drivers/gpu/drm/i915/gvt/handlers.c
@@ -1244,7 +1244,7 @@ static int dma_ctrl_write(struct intel_vgpu *vgpu, unsigned int offset,
 	mode = vgpu_vreg(vgpu, offset);
 
 	if (GFX_MODE_BIT_SET_IN_MASK(mode, START_DMA)) {
-		WARN_ONCE(1, "VM(%d): iGVT-g doesn't supporte GuC\n",
+		WARN_ONCE(1, "VM(%d): iGVT-g doesn't support GuC\n",
 				vgpu->id);
 		return 0;
 	}
diff --git a/drivers/gpu/drm/i915/gvt/render.c b/drivers/gpu/drm/i915/gvt/render.c
index c6e7972ac21da8..a5e11d89df2f86 100644
--- a/drivers/gpu/drm/i915/gvt/render.c
+++ b/drivers/gpu/drm/i915/gvt/render.c
@@ -340,6 +340,9 @@ void intel_gvt_restore_render_mmio(struct intel_vgpu *vgpu, int ring_id)
 		} else
 			v = mmio->value;
 
+		if (mmio->in_context)
+			continue;
+
 		I915_WRITE(mmio->reg, v);
 		POSTING_READ(mmio->reg);
 
diff --git a/drivers/gpu/drm/i915/gvt/sched_policy.c b/drivers/gpu/drm/i915/gvt/sched_policy.c
index 79ba4b3440aafd..f25ff133865f13 100644
--- a/drivers/gpu/drm/i915/gvt/sched_policy.c
+++ b/drivers/gpu/drm/i915/gvt/sched_policy.c
@@ -129,9 +129,13 @@ static void try_to_schedule_next_vgpu(struct intel_gvt *gvt)
 	struct vgpu_sched_data *vgpu_data;
 	ktime_t cur_time;
 
-	/* no target to schedule */
-	if (!scheduler->next_vgpu)
+	/* no need to schedule if next_vgpu is the same with current_vgpu,
+	 * let scheduler chose next_vgpu again by setting it to NULL.
+	 */
+	if (scheduler->next_vgpu == scheduler->current_vgpu) {
+		scheduler->next_vgpu = NULL;
 		return;
+	}
 
 	/*
 	 * after the flag is set, workload dispatch thread will
diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c
index 2aa6b97fd22f28..a0563e18d753fd 100644
--- a/drivers/gpu/drm/i915/i915_gem_gtt.c
+++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
@@ -195,9 +195,12 @@ static int ppgtt_bind_vma(struct i915_vma *vma,
 	u32 pte_flags;
 	int ret;
 
-	ret = vma->vm->allocate_va_range(vma->vm, vma->node.start, vma->size);
-	if (ret)
-		return ret;
+	if (!(vma->flags & I915_VMA_LOCAL_BIND)) {
+		ret = vma->vm->allocate_va_range(vma->vm, vma->node.start,
+						 vma->size);
+		if (ret)
+			return ret;
+	}
 
 	vma->pages = vma->obj->mm.pages;
 
@@ -2306,7 +2309,8 @@ static int aliasing_gtt_bind_vma(struct i915_vma *vma,
 	if (flags & I915_VMA_LOCAL_BIND) {
 		struct i915_hw_ppgtt *appgtt = i915->mm.aliasing_ppgtt;
 
-		if (appgtt->base.allocate_va_range) {
+		if (!(vma->flags & I915_VMA_LOCAL_BIND) &&
+		    appgtt->base.allocate_va_range) {
 			ret = appgtt->base.allocate_va_range(&appgtt->base,
 							     vma->node.start,
 							     vma->node.size);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 11b12f4124920b..5a7c63e64381e4 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3051,10 +3051,14 @@ enum skl_disp_power_wells {
 #define CLKCFG_FSB_667					(3 << 0)	/* hrawclk 166 */
 #define CLKCFG_FSB_800					(2 << 0)	/* hrawclk 200 */
 #define CLKCFG_FSB_1067					(6 << 0)	/* hrawclk 266 */
+#define CLKCFG_FSB_1067_ALT				(0 << 0)	/* hrawclk 266 */
 #define CLKCFG_FSB_1333					(7 << 0)	/* hrawclk 333 */
-/* Note, below two are guess */
-#define CLKCFG_FSB_1600					(4 << 0)	/* hrawclk 400 */
-#define CLKCFG_FSB_1600_ALT				(0 << 0)	/* hrawclk 400 */
+/*
+ * Note that on at least on ELK the below value is reported for both
+ * 333 and 400 MHz BIOS FSB setting, but given that the gmch datasheet
+ * lists only 200/266/333 MHz FSB as supported let's decode it as 333 MHz.
+ */
+#define CLKCFG_FSB_1333_ALT				(4 << 0)	/* hrawclk 333 */
 #define CLKCFG_FSB_MASK					(7 << 0)
 #define CLKCFG_MEM_533					(1 << 4)
 #define CLKCFG_MEM_667					(2 << 4)
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index dd3ad52b7dfeac..f29a226e24d883 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -1798,13 +1798,11 @@ static int g4x_hrawclk(struct drm_i915_private *dev_priv)
 	case CLKCFG_FSB_800:
 		return 200000;
 	case CLKCFG_FSB_1067:
+	case CLKCFG_FSB_1067_ALT:
 		return 266667;
 	case CLKCFG_FSB_1333:
+	case CLKCFG_FSB_1333_ALT:
 		return 333333;
-	/* these two are just a guess; one of them might be right */
-	case CLKCFG_FSB_1600:
-	case CLKCFG_FSB_1600_ALT:
-		return 400000;
 	default:
 		return 133333;
 	}
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c
index 3ffe8b1f1d486f..fc0ef492252ac7 100644
--- a/drivers/gpu/drm/i915/intel_dsi.c
+++ b/drivers/gpu/drm/i915/intel_dsi.c
@@ -410,11 +410,10 @@ static void glk_dsi_device_ready(struct intel_encoder *encoder)
 		val |= (ULPS_STATE_ENTER | DEVICE_READY);
 		I915_WRITE(MIPI_DEVICE_READY(port), val);
 
-		/* Wait for ULPS Not active */
+		/* Wait for ULPS active */
 		if (intel_wait_for_register(dev_priv,
-				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE,
-				GLK_ULPS_NOT_ACTIVE, 20))
-			DRM_ERROR("ULPS is still active\n");
+				MIPI_CTRL(port), GLK_ULPS_NOT_ACTIVE, 0, 20))
+			DRM_ERROR("ULPS not active\n");
 
 		/* Exit ULPS */
 		val = I915_READ(MIPI_DEVICE_READY(port));
diff --git a/drivers/gpu/drm/i915/intel_lpe_audio.c b/drivers/gpu/drm/i915/intel_lpe_audio.c
index 25d8e76489e40f..668f00480d97c0 100644
--- a/drivers/gpu/drm/i915/intel_lpe_audio.c
+++ b/drivers/gpu/drm/i915/intel_lpe_audio.c
@@ -63,6 +63,7 @@
 #include <linux/acpi.h>
 #include <linux/device.h>
 #include <linux/pci.h>
+#include <linux/pm_runtime.h>
 
 #include "i915_drv.h"
 #include <linux/delay.h>
@@ -121,6 +122,10 @@ lpe_audio_platdev_create(struct drm_i915_private *dev_priv)
 
 	kfree(rsc);
 
+	pm_runtime_forbid(&platdev->dev);
+	pm_runtime_set_active(&platdev->dev);
+	pm_runtime_enable(&platdev->dev);
+
 	return platdev;
 
 err:
diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c
index 664b7fe206d654..b11d3920b9a521 100644
--- a/sound/x86/intel_hdmi_audio.c
+++ b/sound/x86/intel_hdmi_audio.c
@@ -1809,10 +1809,6 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)
 	pdata->notify_pending = false;
 	spin_unlock_irq(&pdata->lpe_audio_slock);
 
-	/* runtime PM isn't enabled as default, since it won't save much on
-	 * BYT/CHT devices; user who want the runtime PM should adjust the
-	 * power/ontrol and power/autosuspend_delay_ms sysfs entries instead
-	 */
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_mark_last_busy(&pdev->dev);
 	pm_runtime_set_active(&pdev->dev);