aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorRemi Pommarel <repk@triplefau.lt>2023-10-04 16:33:56 +0200
committerJakub Kicinski <kuba@kernel.org>2023-10-05 09:15:55 -0700
commit3eef8555891026628aa1cc6dbc01db86df88aa26 (patch)
tree6f83917a237684ae8fc57385fad3d6ac350d62d0
parent566aeed6871ac2189b5bfe03e1a5b3b7be5eca38 (diff)
downloadvfs-3eef8555891026628aa1cc6dbc01db86df88aa26.tar.gz
net: stmmac: remove unneeded stmmac_poll_controller
Using netconsole netpoll_poll_dev could be called from interrupt context, thus using disable_irq() would cause the following kernel warning with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/irq/manage.c:137 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 10, name: ksoftirqd/0 CPU: 0 PID: 10 Comm: ksoftirqd/0 Tainted: G W 5.15.42-00075-g816b502b2298-dirty #117 Hardware name: aml (r1) (DT) Call trace: dump_backtrace+0x0/0x270 show_stack+0x14/0x20 dump_stack_lvl+0x8c/0xac dump_stack+0x18/0x30 ___might_sleep+0x150/0x194 __might_sleep+0x64/0xbc synchronize_irq+0x8c/0x150 disable_irq+0x2c/0x40 stmmac_poll_controller+0x140/0x1a0 netpoll_poll_dev+0x6c/0x220 netpoll_send_skb+0x308/0x390 netpoll_send_udp+0x418/0x760 write_msg+0x118/0x140 [netconsole] console_unlock+0x404/0x500 vprintk_emit+0x118/0x250 dev_vprintk_emit+0x19c/0x1cc dev_printk_emit+0x90/0xa8 __dev_printk+0x78/0x9c _dev_warn+0xa4/0xbc ath10k_warn+0xe8/0xf0 [ath10k_core] ath10k_htt_txrx_compl_task+0x790/0x7fc [ath10k_core] ath10k_pci_napi_poll+0x98/0x1f4 [ath10k_pci] __napi_poll+0x58/0x1f4 net_rx_action+0x504/0x590 _stext+0x1b8/0x418 run_ksoftirqd+0x74/0xa4 smpboot_thread_fn+0x210/0x3c0 kthread+0x1fc/0x210 ret_from_fork+0x10/0x20 Since [0] .ndo_poll_controller is only needed if driver doesn't or partially use NAPI. Because stmmac does so, stmmac_poll_controller can be removed fixing the above warning. [0] commit ac3d9dd034e5 ("netpoll: make ndo_poll_controller() optional") Cc: <stable@vger.kernel.org> # 5.15.x Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1c156a6d8c9170bd6a17825f2277115525b4d50f.1696429960.git.repk@triplefau.lt Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c30
1 files changed, 0 insertions, 30 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 83c567a89a4613..ed1a5a31a4914a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6002,33 +6002,6 @@ static irqreturn_t stmmac_msi_intr_rx(int irq, void *data)
return IRQ_HANDLED;
}
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/* Polling receive - used by NETCONSOLE and other diagnostic tools
- * to allow network I/O with interrupts disabled.
- */
-static void stmmac_poll_controller(struct net_device *dev)
-{
- struct stmmac_priv *priv = netdev_priv(dev);
- int i;
-
- /* If adapter is down, do nothing */
- if (test_bit(STMMAC_DOWN, &priv->state))
- return;
-
- if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN) {
- for (i = 0; i < priv->plat->rx_queues_to_use; i++)
- stmmac_msi_intr_rx(0, &priv->dma_conf.rx_queue[i]);
-
- for (i = 0; i < priv->plat->tx_queues_to_use; i++)
- stmmac_msi_intr_tx(0, &priv->dma_conf.tx_queue[i]);
- } else {
- disable_irq(dev->irq);
- stmmac_interrupt(dev->irq, dev);
- enable_irq(dev->irq);
- }
-}
-#endif
-
/**
* stmmac_ioctl - Entry point for the Ioctl
* @dev: Device pointer.
@@ -6989,9 +6962,6 @@ static const struct net_device_ops stmmac_netdev_ops = {
.ndo_get_stats64 = stmmac_get_stats64,
.ndo_setup_tc = stmmac_setup_tc,
.ndo_select_queue = stmmac_select_queue,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = stmmac_poll_controller,
-#endif
.ndo_set_mac_address = stmmac_set_mac_address,
.ndo_vlan_rx_add_vid = stmmac_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = stmmac_vlan_rx_kill_vid,