Merge tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull RAS updates from Borislav Petkov:

 - Add initial support for RAS hardware found on AMD server GPUs (MI200).

   Those GPUs and CPUs are connected together through the coherent
   fabric and the GPU memory controllers report errors through x86's MCA
   so EDAC needs to support them. The amd64_edac driver supports now HBM
   (High Bandwidth Memory) and thus such heterogeneous memory controller
   systems

 - Other small cleanups and improvements

* tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  EDAC/amd64: Cache and use GPU node map
  EDAC/amd64: Add support for AMD heterogeneous Family 19h Model 30h-3Fh
  EDAC/amd64: Document heterogeneous system enumeration
  x86/MCE/AMD, EDAC/mce_amd: Decode UMC_V2 ECC errors
  x86/amd_nb: Re-sort and re-indent PCI defines
  x86/amd_nb: Add MI200 PCI IDs
  ras/debugfs: Fix error checking for debugfs_create_dir()
  x86/MCE: Check a hw error's address to determine proper recovery action

1 files changed, 120 insertions, 0 deletions

diff --git a/Documentation/driver-api/edac.rst b/Documentation/driver-api/edac.rst
index b8c742aa0a71c6..f4f044b95c4f76 100644
--- a/Documentation/driver-api/edac.rst
+++ b/Documentation/driver-api/edac.rst
@@ -106,6 +106,16 @@ will occupy those chip-select rows.
 This term is avoided because it is unclear when needing to distinguish
 between chip-select rows and socket sets.
 
+* High Bandwidth Memory (HBM)
+
+HBM is a new memory type with low power consumption and ultra-wide
+communication lanes. It uses vertically stacked memory chips (DRAM dies)
+interconnected by microscopic wires called "through-silicon vias," or
+TSVs.
+
+Several stacks of HBM chips connect to the CPU or GPU through an ultra-fast
+interconnect called the "interposer". Therefore, HBM's characteristics
+are nearly indistinguishable from on-chip integrated RAM.
 
 Memory Controllers
 ------------------
@@ -176,3 +186,113 @@ nodes::
 	the L1 and L2 directories would be "edac_device_block's"
 
 .. kernel-doc:: drivers/edac/edac_device.h
+
+
+Heterogeneous system support
+----------------------------
+
+An AMD heterogeneous system is built by connecting the data fabrics of
+both CPUs and GPUs via custom xGMI links. Thus, the data fabric on the
+GPU nodes can be accessed the same way as the data fabric on CPU nodes.
+
+The MI200 accelerators are data center GPUs. They have 2 data fabrics,
+and each GPU data fabric contains four Unified Memory Controllers (UMC).
+Each UMC contains eight channels. Each UMC channel controls one 128-bit
+HBM2e (2GB) channel (equivalent to 8 X 2GB ranks).  This creates a total
+of 4096-bits of DRAM data bus.
+
+While the UMC is interfacing a 16GB (8high X 2GB DRAM) HBM stack, each UMC
+channel is interfacing 2GB of DRAM (represented as rank).
+
+Memory controllers on AMD GPU nodes can be represented in EDAC thusly:
+
+	GPU DF / GPU Node -> EDAC MC
+	GPU UMC           -> EDAC CSROW
+	GPU UMC channel   -> EDAC CHANNEL
+
+For example: a heterogeneous system with 1 AMD CPU is connected to
+4 MI200 (Aldebaran) GPUs using xGMI.
+
+Some more heterogeneous hardware details:
+
+- The CPU UMC (Unified Memory Controller) is mostly the same as the GPU UMC.
+  They have chip selects (csrows) and channels. However, the layouts are different
+  for performance, physical layout, or other reasons.
+- CPU UMCs use 1 channel, In this case UMC = EDAC channel. This follows the
+  marketing speak. CPU has X memory channels, etc.
+- CPU UMCs use up to 4 chip selects, So UMC chip select = EDAC CSROW.
+- GPU UMCs use 1 chip select, So UMC = EDAC CSROW.
+- GPU UMCs use 8 channels, So UMC channel = EDAC channel.
+
+The EDAC subsystem provides a mechanism to handle AMD heterogeneous
+systems by calling system specific ops for both CPUs and GPUs.
+
+AMD GPU nodes are enumerated in sequential order based on the PCI
+hierarchy, and the first GPU node is assumed to have a Node ID value
+following those of the CPU nodes after latter are fully populated::
+
+	$ ls /sys/devices/system/edac/mc/
+		mc0   - CPU MC node 0
+		mc1  |
+		mc2  |- GPU card[0] => node 0(mc1), node 1(mc2)
+		mc3  |
+		mc4  |- GPU card[1] => node 0(mc3), node 1(mc4)
+		mc5  |
+		mc6  |- GPU card[2] => node 0(mc5), node 1(mc6)
+		mc7  |
+		mc8  |- GPU card[3] => node 0(mc7), node 1(mc8)
+
+For example, a heterogeneous system with one AMD CPU is connected to
+four MI200 (Aldebaran) GPUs using xGMI. This topology can be represented
+via the following sysfs entries::
+
+	/sys/devices/system/edac/mc/..
+
+	CPU			# CPU node
+	├── mc 0
+
+	GPU Nodes are enumerated sequentially after CPU nodes have been populated
+	GPU card 1		# Each MI200 GPU has 2 nodes/mcs
+	├── mc 1		# GPU node 0 == mc1, Each MC node has 4 UMCs/CSROWs
+	│   ├── csrow 0		# UMC 0
+	│   │   ├── channel 0	# Each UMC has 8 channels
+	│   │   ├── channel 1   # size of each channel is 2 GB, so each UMC has 16 GB
+	│   │   ├── channel 2
+	│   │   ├── channel 3
+	│   │   ├── channel 4
+	│   │   ├── channel 5
+	│   │   ├── channel 6
+	│   │   ├── channel 7
+	│   ├── csrow 1		# UMC 1
+	│   │   ├── channel 0
+	│   │   ├── ..
+	│   │   ├── channel 7
+	│   ├── ..		..
+	│   ├── csrow 3		# UMC 3
+	│   │   ├── channel 0
+	│   │   ├── ..
+	│   │   ├── channel 7
+	│   ├── rank 0
+	│   ├── ..		..
+	│   ├── rank 31		# total 32 ranks/dimms from 4 UMCs
+	├
+	├── mc 2		# GPU node 1 == mc2
+	│   ├── ..		# each GPU has total 64 GB
+
+	GPU card 2
+	├── mc 3
+	│   ├── ..
+	├── mc 4
+	│   ├── ..
+
+	GPU card 3
+	├── mc 5
+	│   ├── ..
+	├── mc 6
+	│   ├── ..
+
+	GPU card 4
+	├── mc 7
+	│   ├── ..
+	├── mc 8
+	│   ├── ..