Merge tag 'mailbox-v5.10' of git://git.linaro.org/landing-teams/working/fujitsu/integration

Pull mailbox updates from Jassi Brar:

 - arm: implementation of mhu as a doorbell driver and conversion of
   dt-bindings to json-schema

 - mediatek: fix platform_get_irq error handling

 - bcm: convert tasklets to use new tasklet_setup api

 - core: fix race cause by hrtimer starting inappropriately

* tag 'mailbox-v5.10' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: avoid timer start from callback
  maiblox: mediatek: Fix handling of platform_get_irq() error
  mailbox: arm_mhu: Add ARM MHU doorbell driver
  mailbox: arm_mhu: Match only if compatible is "arm,mhu"
  dt-bindings: mailbox: add doorbell support to ARM MHU
  dt-bindings: mailbox : arm,mhu: Convert to Json-schema
  mailbox: bcm: convert tasklets to use new tasklet_setup() API

8 files changed, 506 insertions, 57 deletions

diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
new file mode 100644
index 00000000000000..d43791a2dde751
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM MHU Mailbox Controller
+
+maintainers:
+  - Jassi Brar <jaswinder.singh@linaro.org>
+
+description: |
+  The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3
+  independent channels/links to communicate with remote processor(s).  MHU links
+  are hardwired on a platform. A link raises interrupt for any received data.
+  However, there is no specified way of knowing if the sent data has been read
+  by the remote. This driver assumes the sender polls STAT register and the
+  remote clears it after having read the data.  The last channel is specified to
+  be a 'Secure' resource, hence can't be used by Linux running NS.
+
+  The MHU hardware also allows operations in doorbell mode. The MHU drives the
+  interrupt signal using a 32-bit register, with all 32-bits logically ORed
+  together. It provides a set of registers to enable software to set, clear and
+  check the status of each of the bits of this register independently. The use
+  of 32 bits per interrupt line enables software to provide more information
+  about the source of the interrupt. For example, each bit of the register can
+  be associated with a type of event that can contribute to raising the
+  interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote
+  processor.
+
+# We need a select here so we don't match all nodes with 'arm,primecell'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - arm,mhu
+          - arm,mhu-doorbell
+  required:
+    - compatible
+
+properties:
+  compatible:
+    oneOf:
+      - description: Data transfer mode
+        items:
+          - const: arm,mhu
+          - const: arm,primecell
+
+      - description: Doorbell mode
+        items:
+          - const: arm,mhu-doorbell
+          - const: arm,primecell
+
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: low-priority non-secure
+      - description: high-priority non-secure
+      - description: Secure
+    maxItems: 3
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  '#mbox-cells':
+    description: |
+      Set to 1 in data transfer mode and represents index of the channel.
+      Set to 2 in doorbell mode and represents index of the channel and doorbell
+      number.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#mbox-cells'
+
+additionalProperties: false
+
+examples:
+  # Data transfer mode.
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhuA: mailbox@2b1f0000 {
+            #mbox-cells = <1>;
+            compatible = "arm,mhu", "arm,primecell";
+            reg = <0 0x2b1f0000 0 0x1000>;
+            interrupts = <0 36 4>, /* LP-NonSecure */
+                         <0 35 4>, /* HP-NonSecure */
+                         <0 37 4>; /* Secure */
+            clocks = <&clock 0 2 1>;
+            clock-names = "apb_pclk";
+        };
+
+        mhu_client_scb: scb@2e000000 {
+            compatible = "fujitsu,mb86s70-scb-1.0";
+            reg = <0 0x2e000000 0 0x4000>;
+            mboxes = <&mhuA 1>; /* HP-NonSecure */
+        };
+    };
+
+  # Doorbell mode.
+  - |
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        mhuB: mailbox@2b2f0000 {
+            #mbox-cells = <2>;
+            compatible = "arm,mhu-doorbell", "arm,primecell";
+            reg = <0 0x2b2f0000 0 0x1000>;
+            interrupts = <0 36 4>, /* LP-NonSecure */
+                         <0 35 4>, /* HP-NonSecure */
+                         <0 37 4>; /* Secure */
+            clocks = <&clock 0 2 1>;
+            clock-names = "apb_pclk";
+        };
+
+        mhu_client_scpi: scpi@2f000000 {
+            compatible = "arm,scpi";
+            reg = <0 0x2f000000 0 0x200>;
+            mboxes = <&mhuB 1 4>; /* HP-NonSecure, 5th doorbell */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt b/Documentation/devicetree/bindings/mailbox/arm-mhu.txt
deleted file mode 100644
index 4971f03f0b3307..00000000000000
--- a/Documentation/devicetree/bindings/mailbox/arm-mhu.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-ARM MHU Mailbox Driver
-======================
-
-The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has
-3 independent channels/links to communicate with remote processor(s).
- MHU links are hardwired on a platform. A link raises interrupt for any
-received data. However, there is no specified way of knowing if the sent
-data has been read by the remote. This driver assumes the sender polls
-STAT register and the remote clears it after having read the data.
-The last channel is specified to be a 'Secure' resource, hence can't be
-used by Linux running NS.
-
-Mailbox Device Node:
-====================
-
-Required properties:
---------------------
-- compatible:		Shall be "arm,mhu" & "arm,primecell"
-- reg:			Contains the mailbox register address range (base
-			address and length)
-- #mbox-cells		Shall be 1 - the index of the channel needed.
-- interrupts:		Contains the interrupt information corresponding to
-			each of the 3 links of MHU.
-
-Example:
---------
-
-	mhu: mailbox@2b1f0000 {
-		#mbox-cells = <1>;
-		compatible = "arm,mhu", "arm,primecell";
-		reg = <0 0x2b1f0000 0x1000>;
-		interrupts = <0 36 4>, /* LP-NonSecure */
-			     <0 35 4>, /* HP-NonSecure */
-			     <0 37 4>; /* Secure */
-		clocks = <&clock 0 2 1>;
-		clock-names = "apb_pclk";
-	};
-
-	mhu_client: scb@2e000000 {
-		compatible = "fujitsu,mb86s70-scb-1.0";
-		reg = <0 0x2e000000 0x4000>;
-		mboxes = <&mhu 1>; /* HP-NonSecure */
-	};
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 60d224b723a1a1..2e06e02b2e03d8 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -5,7 +5,7 @@ obj-$(CONFIG_MAILBOX)		+= mailbox.o
 
 obj-$(CONFIG_MAILBOX_TEST)	+= mailbox-test.o
 
-obj-$(CONFIG_ARM_MHU)	+= arm_mhu.o
+obj-$(CONFIG_ARM_MHU)	+= arm_mhu.o arm_mhu_db.o
 
 obj-$(CONFIG_IMX_MBOX)	+= imx-mailbox.o
 
diff --git a/drivers/mailbox/arm_mhu.c b/drivers/mailbox/arm_mhu.c
index 9da236552bd77e..b7fbf276eb62bf 100644
--- a/drivers/mailbox/arm_mhu.c
+++ b/drivers/mailbox/arm_mhu.c
@@ -113,6 +113,9 @@ static int mhu_probe(struct amba_device *adev, const struct amba_id *id)
 	struct device *dev = &adev->dev;
 	int mhu_reg[MHU_CHANS] = {MHU_LP_OFFSET, MHU_HP_OFFSET, MHU_SEC_OFFSET};
 
+	if (!of_device_is_compatible(dev->of_node, "arm,mhu"))
+		return -ENODEV;
+
 	/* Allocate memory for device */
 	mhu = devm_kzalloc(dev, sizeof(*mhu), GFP_KERNEL);
 	if (!mhu)
diff --git a/drivers/mailbox/arm_mhu_db.c b/drivers/mailbox/arm_mhu_db.c
new file mode 100644
index 00000000000000..275efe4cca0c21
--- /dev/null
+++ b/drivers/mailbox/arm_mhu_db.c
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2013-2015 Fujitsu Semiconductor Ltd.
+ * Copyright (C) 2015 Linaro Ltd.
+ * Based on ARM MHU driver by Jassi Brar <jaswinder.singh@linaro.org>
+ * Copyright (C) 2020 ARM Ltd.
+ */
+
+#include <linux/amba/bus.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_controller.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#define INTR_STAT_OFS	0x0
+#define INTR_SET_OFS	0x8
+#define INTR_CLR_OFS	0x10
+
+#define MHU_LP_OFFSET	0x0
+#define MHU_HP_OFFSET	0x20
+#define MHU_SEC_OFFSET	0x200
+#define TX_REG_OFFSET	0x100
+
+#define MHU_CHANS	3	/* Secure, Non-Secure High and Low Priority */
+#define MHU_CHAN_MAX	20	/* Max channels to save on unused RAM */
+#define MHU_NUM_DOORBELLS	32
+
+struct mhu_db_link {
+	unsigned int irq;
+	void __iomem *tx_reg;
+	void __iomem *rx_reg;
+};
+
+struct arm_mhu {
+	void __iomem *base;
+	struct mhu_db_link mlink[MHU_CHANS];
+	struct mbox_controller mbox;
+	struct device *dev;
+};
+
+/**
+ * ARM MHU Mailbox allocated channel information
+ *
+ * @mhu: Pointer to parent mailbox device
+ * @pchan: Physical channel within which this doorbell resides in
+ * @doorbell: doorbell number pertaining to this channel
+ */
+struct mhu_db_channel {
+	struct arm_mhu *mhu;
+	unsigned int pchan;
+	unsigned int doorbell;
+};
+
+static inline struct mbox_chan *
+mhu_db_mbox_to_channel(struct mbox_controller *mbox, unsigned int pchan,
+		       unsigned int doorbell)
+{
+	int i;
+	struct mhu_db_channel *chan_info;
+
+	for (i = 0; i < mbox->num_chans; i++) {
+		chan_info = mbox->chans[i].con_priv;
+		if (chan_info && chan_info->pchan == pchan &&
+		    chan_info->doorbell == doorbell)
+			return &mbox->chans[i];
+	}
+
+	return NULL;
+}
+
+static void mhu_db_mbox_clear_irq(struct mbox_chan *chan)
+{
+	struct mhu_db_channel *chan_info = chan->con_priv;
+	void __iomem *base = chan_info->mhu->mlink[chan_info->pchan].rx_reg;
+
+	writel_relaxed(BIT(chan_info->doorbell), base + INTR_CLR_OFS);
+}
+
+static unsigned int mhu_db_mbox_irq_to_pchan_num(struct arm_mhu *mhu, int irq)
+{
+	unsigned int pchan;
+
+	for (pchan = 0; pchan < MHU_CHANS; pchan++)
+		if (mhu->mlink[pchan].irq == irq)
+			break;
+	return pchan;
+}
+
+static struct mbox_chan *
+mhu_db_mbox_irq_to_channel(struct arm_mhu *mhu, unsigned int pchan)
+{
+	unsigned long bits;
+	unsigned int doorbell;
+	struct mbox_chan *chan = NULL;
+	struct mbox_controller *mbox = &mhu->mbox;
+	void __iomem *base = mhu->mlink[pchan].rx_reg;
+
+	bits = readl_relaxed(base + INTR_STAT_OFS);
+	if (!bits)
+		/* No IRQs fired in specified physical channel */
+		return NULL;
+
+	/* An IRQ has fired, find the associated channel */
+	for (doorbell = 0; bits; doorbell++) {
+		if (!test_and_clear_bit(doorbell, &bits))
+			continue;
+
+		chan = mhu_db_mbox_to_channel(mbox, pchan, doorbell);
+		if (chan)
+			break;
+		dev_err(mbox->dev,
+			"Channel not registered: pchan: %d doorbell: %d\n",
+			pchan, doorbell);
+	}
+
+	return chan;
+}
+
+static irqreturn_t mhu_db_mbox_rx_handler(int irq, void *data)
+{
+	struct mbox_chan *chan;
+	struct arm_mhu *mhu = data;
+	unsigned int pchan = mhu_db_mbox_irq_to_pchan_num(mhu, irq);
+
+	while (NULL != (chan = mhu_db_mbox_irq_to_channel(mhu, pchan))) {
+		mbox_chan_received_data(chan, NULL);
+		mhu_db_mbox_clear_irq(chan);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static bool mhu_db_last_tx_done(struct mbox_chan *chan)
+{
+	struct mhu_db_channel *chan_info = chan->con_priv;
+	void __iomem *base = chan_info->mhu->mlink[chan_info->pchan].tx_reg;
+
+	if (readl_relaxed(base + INTR_STAT_OFS) & BIT(chan_info->doorbell))
+		return false;
+
+	return true;
+}
+
+static int mhu_db_send_data(struct mbox_chan *chan, void *data)
+{
+	struct mhu_db_channel *chan_info = chan->con_priv;
+	void __iomem *base = chan_info->mhu->mlink[chan_info->pchan].tx_reg;
+
+	/* Send event to co-processor */
+	writel_relaxed(BIT(chan_info->doorbell), base + INTR_SET_OFS);
+
+	return 0;
+}
+
+static int mhu_db_startup(struct mbox_chan *chan)
+{
+	mhu_db_mbox_clear_irq(chan);
+	return 0;
+}
+
+static void mhu_db_shutdown(struct mbox_chan *chan)
+{
+	struct mhu_db_channel *chan_info = chan->con_priv;
+	struct mbox_controller *mbox = &chan_info->mhu->mbox;
+	int i;
+
+	for (i = 0; i < mbox->num_chans; i++)
+		if (chan == &mbox->chans[i])
+			break;
+
+	if (mbox->num_chans == i) {
+		dev_warn(mbox->dev, "Request to free non-existent channel\n");
+		return;
+	}
+
+	/* Reset channel */
+	mhu_db_mbox_clear_irq(chan);
+	kfree(chan->con_priv);
+	chan->con_priv = NULL;
+}
+
+static struct mbox_chan *mhu_db_mbox_xlate(struct mbox_controller *mbox,
+					   const struct of_phandle_args *spec)
+{
+	struct arm_mhu *mhu = dev_get_drvdata(mbox->dev);
+	struct mhu_db_channel *chan_info;
+	struct mbox_chan *chan;
+	unsigned int pchan = spec->args[0];
+	unsigned int doorbell = spec->args[1];
+	int i;
+
+	/* Bounds checking */
+	if (pchan >= MHU_CHANS || doorbell >= MHU_NUM_DOORBELLS) {
+		dev_err(mbox->dev,
+			"Invalid channel requested pchan: %d doorbell: %d\n",
+			pchan, doorbell);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* Is requested channel free? */
+	chan = mhu_db_mbox_to_channel(mbox, pchan, doorbell);
+	if (chan) {
+		dev_err(mbox->dev, "Channel in use: pchan: %d doorbell: %d\n",
+			pchan, doorbell);
+		return ERR_PTR(-EBUSY);
+	}
+
+	/* Find the first free slot */
+	for (i = 0; i < mbox->num_chans; i++)
+		if (!mbox->chans[i].con_priv)
+			break;
+
+	if (mbox->num_chans == i) {
+		dev_err(mbox->dev, "No free channels left\n");
+		return ERR_PTR(-EBUSY);
+	}
+
+	chan = &mbox->chans[i];
+
+	chan_info = devm_kzalloc(mbox->dev, sizeof(*chan_info), GFP_KERNEL);
+	if (!chan_info)
+		return ERR_PTR(-ENOMEM);
+
+	chan_info->mhu = mhu;
+	chan_info->pchan = pchan;
+	chan_info->doorbell = doorbell;
+
+	chan->con_priv = chan_info;
+
+	dev_dbg(mbox->dev, "mbox: created channel phys: %d doorbell: %d\n",
+		pchan, doorbell);
+
+	return chan;
+}
+
+static const struct mbox_chan_ops mhu_db_ops = {
+	.send_data = mhu_db_send_data,
+	.startup = mhu_db_startup,
+	.shutdown = mhu_db_shutdown,
+	.last_tx_done = mhu_db_last_tx_done,
+};
+
+static int mhu_db_probe(struct amba_device *adev, const struct amba_id *id)
+{
+	u32 cell_count;
+	int i, err, max_chans;
+	struct arm_mhu *mhu;
+	struct mbox_chan *chans;
+	struct device *dev = &adev->dev;
+	struct device_node *np = dev->of_node;
+	int mhu_reg[MHU_CHANS] = {
+		MHU_LP_OFFSET, MHU_HP_OFFSET, MHU_SEC_OFFSET,
+	};
+
+	if (!of_device_is_compatible(np, "arm,mhu-doorbell"))
+		return -ENODEV;
+
+	err = of_property_read_u32(np, "#mbox-cells", &cell_count);
+	if (err) {
+		dev_err(dev, "failed to read #mbox-cells in '%pOF'\n", np);
+		return err;
+	}
+
+	if (cell_count == 2) {
+		max_chans = MHU_CHAN_MAX;
+	} else {
+		dev_err(dev, "incorrect value of #mbox-cells in '%pOF'\n", np);
+		return -EINVAL;
+	}
+
+	mhu = devm_kzalloc(dev, sizeof(*mhu), GFP_KERNEL);
+	if (!mhu)
+		return -ENOMEM;
+
+	mhu->base = devm_ioremap_resource(dev, &adev->res);
+	if (IS_ERR(mhu->base)) {
+		dev_err(dev, "ioremap failed\n");
+		return PTR_ERR(mhu->base);
+	}
+
+	chans = devm_kcalloc(dev, max_chans, sizeof(*chans), GFP_KERNEL);
+	if (!chans)
+		return -ENOMEM;
+
+	mhu->dev = dev;
+	mhu->mbox.dev = dev;
+	mhu->mbox.chans = chans;
+	mhu->mbox.num_chans = max_chans;
+	mhu->mbox.txdone_irq = false;
+	mhu->mbox.txdone_poll = true;
+	mhu->mbox.txpoll_period = 1;
+
+	mhu->mbox.of_xlate = mhu_db_mbox_xlate;
+	amba_set_drvdata(adev, mhu);
+
+	mhu->mbox.ops = &mhu_db_ops;
+
+	err = devm_mbox_controller_register(dev, &mhu->mbox);
+	if (err) {
+		dev_err(dev, "Failed to register mailboxes %d\n", err);
+		return err;
+	}
+
+	for (i = 0; i < MHU_CHANS; i++) {
+		int irq = mhu->mlink[i].irq = adev->irq[i];
+
+		if (irq <= 0) {
+			dev_dbg(dev, "No IRQ found for Channel %d\n", i);
+			continue;
+		}
+
+		mhu->mlink[i].rx_reg = mhu->base + mhu_reg[i];
+		mhu->mlink[i].tx_reg = mhu->mlink[i].rx_reg + TX_REG_OFFSET;
+
+		err = devm_request_threaded_irq(dev, irq, NULL,
+						mhu_db_mbox_rx_handler,
+						IRQF_ONESHOT, "mhu_db_link", mhu);
+		if (err) {
+			dev_err(dev, "Can't claim IRQ %d\n", irq);
+			mbox_controller_unregister(&mhu->mbox);
+			return err;
+		}
+	}
+
+	dev_info(dev, "ARM MHU Doorbell mailbox registered\n");
+	return 0;
+}
+
+static struct amba_id mhu_ids[] = {
+	{
+		.id	= 0x1bb098,
+		.mask	= 0xffffff,
+	},
+	{ 0, 0 },
+};
+MODULE_DEVICE_TABLE(amba, mhu_ids);
+
+static struct amba_driver arm_mhu_db_driver = {
+	.drv = {
+		.name	= "mhu-doorbell",
+	},
+	.id_table	= mhu_ids,
+	.probe		= mhu_db_probe,
+};
+module_amba_driver(arm_mhu_db_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ARM MHU Doorbell Driver");
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
diff --git a/drivers/mailbox/bcm-pdc-mailbox.c b/drivers/mailbox/bcm-pdc-mailbox.c
index 53945ca5d785ac..5b375985f7b837 100644
--- a/drivers/mailbox/bcm-pdc-mailbox.c
+++ b/drivers/mailbox/bcm-pdc-mailbox.c
@@ -962,9 +962,9 @@ static irqreturn_t pdc_irq_handler(int irq, void *data)
  * a DMA receive interrupt. Reenables the receive interrupt.
  * @data: PDC state structure
  */
-static void pdc_tasklet_cb(unsigned long data)
+static void pdc_tasklet_cb(struct tasklet_struct *t)
 {
-	struct pdc_state *pdcs = (struct pdc_state *)data;
+	struct pdc_state *pdcs = from_tasklet(pdcs, t, rx_tasklet);
 
 	pdc_receive(pdcs);
 
@@ -1589,7 +1589,7 @@ static int pdc_probe(struct platform_device *pdev)
 	pdc_hw_init(pdcs);
 
 	/* Init tasklet for deferred DMA rx processing */
-	tasklet_init(&pdcs->rx_tasklet, pdc_tasklet_cb, (unsigned long)pdcs);
+	tasklet_setup(&pdcs->rx_tasklet, pdc_tasklet_cb);
 
 	err = pdc_interrupts_init(pdcs);
 	if (err)
diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c
index 0b821a5b2db844..3e7d4b20ab34fa 100644
--- a/drivers/mailbox/mailbox.c
+++ b/drivers/mailbox/mailbox.c
@@ -82,9 +82,12 @@ static void msg_submit(struct mbox_chan *chan)
 exit:
 	spin_unlock_irqrestore(&chan->lock, flags);
 
-	if (!err && (chan->txdone_method & TXDONE_BY_POLL))
-		/* kick start the timer immediately to avoid delays */
-		hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+	/* kick start the timer immediately to avoid delays */
+	if (!err && (chan->txdone_method & TXDONE_BY_POLL)) {
+		/* but only if not already active */
+		if (!hrtimer_active(&chan->mbox->poll_hrt))
+			hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL);
+	}
 }
 
 static void tx_tick(struct mbox_chan *chan, int r)
@@ -122,11 +125,10 @@ static enum hrtimer_restart txdone_hrtimer(struct hrtimer *hrtimer)
 		struct mbox_chan *chan = &mbox->chans[i];
 
 		if (chan->active_req && chan->cl) {
+			resched = true;
 			txdone = chan->mbox->ops->last_tx_done(chan);
 			if (txdone)
 				tx_tick(chan, 0);
-			else
-				resched = true;
 		}
 	}
 
diff --git a/drivers/mailbox/mtk-cmdq-mailbox.c b/drivers/mailbox/mtk-cmdq-mailbox.c
index 484d4438cd835b..5665b6ea8119f1 100644
--- a/drivers/mailbox/mtk-cmdq-mailbox.c
+++ b/drivers/mailbox/mtk-cmdq-mailbox.c
@@ -69,7 +69,7 @@ struct cmdq_task {
 struct cmdq {
 	struct mbox_controller	mbox;
 	void __iomem		*base;
-	u32			irq;
+	int			irq;
 	u32			thread_nr;
 	u32			irq_mask;
 	struct cmdq_thread	*thread;
@@ -525,10 +525,8 @@ static int cmdq_probe(struct platform_device *pdev)
 	}
 
 	cmdq->irq = platform_get_irq(pdev, 0);
-	if (!cmdq->irq) {
-		dev_err(dev, "failed to get irq\n");
-		return -EINVAL;
-	}
+	if (cmdq->irq < 0)
+		return cmdq->irq;
 
 	plat_data = (struct gce_plat *)of_device_get_match_data(dev);
 	if (!plat_data) {