| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Just a few fixes (one with two non-fix deps) plus tidying up
MAINTAINERS"
* tag 'platform-drivers-x86-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel_telemetry: Fix kernel doc descriptions
MAINTAINERS: Drop Mark Gross as maintainer for x86 platform drivers
platform/x86/amd/pmc: adjust getting DRAM size behavior
platform/x86: hp-bioscfg: Remove unused obj in hp_add_other_attributes()
platform/x86: hp-bioscfg: Fix error handling in hp_add_other_attributes()
platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes()
platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes()
platform/x86: ideapad-laptop: Set max_brightness before using it
MAINTAINERS: Remove stale entry for SBL platform driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Tidy up erofs_read_inode() for simplicity
- Fix broken fscache mode due to NULL dereference of dif->bdev_handle
- Add the EROFS webpage to MAINTAINERS, documentation, and Kconfig
* tag 'erofs-for-6.7-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
MAINTAINERS: erofs: add EROFS webpage
erofs: fix NULL dereference of dif->bdev_handle in fscache mode
erofs: simplify erofs_read_inode()
|
|
LKP found issues with a kernel doc in the driver:
core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events'
core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'
It looks like it were copy'n'paste typos when these descriptions
had been introduced. Fix the typos.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Mark has not really been active as maintainer for x86 platform drivers
lately, drop Mark from the MAINTAINERS entries for drivers/platform/x86,
drivers/platform/mellanox and drivers/platform/surface.
Cc: Mark Gross <markgross@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231120154548.611041-1-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix section mismatch warning messages for riscv and loongarch
- Remove CONFIG_IA64 left-over from linux/export-internal.h
- Fix the location of the quotes for UIMAGE_NAME
- Fix a memory leak bug in Kconfig
* tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix memory leak from range properties
kbuild: Move the single quotes for image name
linux/export: clean up the IA-64 KSYM_FUNC macro
modpost: fix section mismatch message for RELA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Flush the translation service tables to prevent unpredictable
behavior on non-coherent GIC devices
* tag 'irq_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Flush ITS tables correctly in non-coherent GIC designs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Ignore invalid x2APIC entries in order to not waste per-CPU data
- Fix a back-to-back signals handling scenario when shadow stack is in
use
- A documentation fix
- Add Kirill as TDX maintainer
* tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi: Ignore invalid x2APIC entries
x86/shstk: Delay signal entry SSP write until after user accesses
x86/Documentation: Indent 'note::' directive for protocol version number note
MAINTAINERS: Add Intel TDX entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Do the push of pending hrtimers away from a CPU which is being
offlined earlier in the offlining process in order to prevent a
deadlock
* tag 'timers_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Push pending hrtimers away from outgoing CPU earlier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix virtual runtime calculation when recomputing a sched entity's
weights
- Fix wrongly rejected unprivileged poll requests to the cgroup psi
pressure files
- Make sure the load balancing is done by only one CPU
* tag 'sched_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix the decision for load balance
sched: psi: fix unprivileged polling against cgroups
sched/eevdf: Fix vruntime adjustment on reweight
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix a hardcoded futex flags case which lead to one robust futex test
failure
* tag 'locking_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix hardcoded flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Make sure the context refcount is transferred too when migrating perf
events
* tag 'perf_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix cpuctx refcounting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Seven small fixes, six in drivers and one in sd.
The sd fix is so large because it changes a struct pointer to a struct
but otherwise is fairly simple"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom-ufs: dt-bindings: Document the SM8650 UFS Controller
scsi: sd: Fix sshdr use in sd_suspend_common()
scsi: scsi_debug: Delete some bogus error checking
scsi: scsi_debug: Fix some bugs in sdebug_error_write()
scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR
scsi: ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
scsi: qla2xxx: Fix system crash due to bad pointer access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"On parisc we still sometimes need writeable stacks, e.g. if programs
aren't compiled with gcc-14. To avoid issues with the upcoming
systemd-254 we therefore have to disable prctl(PR_SET_MDWE) for now
(for parisc only).
The other two patches are minor: a bugfix for the soft power-off on
qemu with 64-bit kernel and prefer strscpy() over strlcpy():
- Fix power soft-off on qemu
- Disable prctl(PR_SET_MDWE) since parisc sometimes still needs
writeable stacks
- Use strscpy instead of strlcpy in show_cpuinfo()"
* tag 'parisc-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
prctl: Disable prctl(PR_SET_MDWE) on parisc
parisc/power: Fix power soft-off when running on qemu
parisc: Replace strlcpy() with strscpy()
|
|
Pull xfs fixes from Chandan Babu:
- Fix deadlock arising due to intent items in AIL not being cleared
when log recovery fails
- Fix stale data exposure bug when remapping COW fork extents to data
fork
- Fix deadlock when data device flush fails
- Fix AGFL minimum size calculation
- Select DEBUG_FS instead of XFS_DEBUG when XFS_ONLINE_SCRUB_STATS is
selected
- Fix corruption of log inode's extent count field when NREXT64 feature
is enabled
* tag 'xfs-6.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: recovery should not clear di_flushiter unconditionally
xfs: inode recovery does not validate the recovered inode
xfs: fix again select in kconfig XFS_ONLINE_SCRUB_STATS
xfs: fix internal error from AGFL exhaustion
xfs: up(ic_sema) if flushing data device fails
xfs: only remap the written blocks in xfs_reflink_end_cow_extent
XFS: Update MAINTAINERS to catch all XFS documentation
xfs: abort intent items when recovery intents fail
xfs: factor out xfs_defer_pending_abort
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix several long-standing bugs in the duplicate reply cache
- Fix a memory leak
* tag 'nfsd-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix checksum mismatches in the duplicate reply cache
NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
NFSD: Update nfsd_cache_append() to use xdr_stream
nfsd: fix file memleak on client_opens_release
|
|
Pull smb client fixes from Steve French:
- multichannel fixes (including a lock ordering fix and an important
refcounting fix)
- spnego fix
* tag '6.7-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix lock ordering while disabling multichannel
cifs: fix leak of iface for primary channel
cifs: fix check of rc in function generate_smb3signingkey
cifs: spnego: add ';' in HOST_KEY_LEN
|
|
systemd-254 tries to use prctl(PR_SET_MDWE) for it's MemoryDenyWriteExecute
functionality, but fails on parisc which still needs executable stacks in
certain combinations of gcc/glibc/kernel.
Disable prctl(PR_SET_MDWE) by returning -EINVAL for now on parisc, until
userspace has catched up.
Signed-off-by: Helge Deller <deller@gmx.de>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sam James <sam@gentoo.org>
Closes: https://github.com/systemd/systemd/issues/29775
Tested-by: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/all/875y2jro9a.fsf@gentoo.org/
Cc: <stable@vger.kernel.org> # v6.3+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Various fixes for the DM delay target to address regressions
introduced during the 6.7 merge window
- Fixes to both DM bufio and the verity target for no-sleep mode,
to address sleeping while atomic issues
- Update DM crypt target in response to the treewide change that
made MAX_ORDER inclusive
* tag 'for-6.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt: start allocating with MAX_ORDER
dm-verity: don't use blocking calls from tasklets
dm-bufio: fix no-sleep mode
dm-delay: avoid duplicate logic
dm-delay: fix bugs introduced by kthread mode
dm-delay: fix a race between delay_presuspend and delay_bio
|
|
Firmware returns the physical address of the power switch,
so need to use gsc_writel() instead of direct memory access.
Fixes: d0c219472980 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Revert a not-working conversion to generic recovery for PXA,
use proper IO accessors for designware, and use proper PM level
for ocores to allow accessing interrupt providers late"
* tag 'i2c-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: ocores: Move system PM hooks to the NOIRQ phase
i2c: designware: Fix corrupted memory seen in the ISR
Revert "i2c: pxa: move to generic GPIO recovery"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Turbostat features are now table-driven (Rui Zhang)
- Add support for some new platforms (Sumeet Pawnikar, Rui Zhang)
- Gracefully run in configs when CPUs are limited (Rui Zhang, Srinivas
Pandruvada)
- misc minor fixes
[ This came in during the merge window, but sorting out the signed tag
took a while, so thus the late merge - Linus ]
* tag 'turbostat-2023.11.07' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (86 commits)
tools/power turbostat: version 2023.11.07
tools/power/turbostat: bugfix "--show IPC"
tools/power/turbostat: Add initial support for LunarLake
tools/power/turbostat: Add initial support for ArrowLake
tools/power/turbostat: Add initial support for GrandRidge
tools/power/turbostat: Add initial support for SierraForest
tools/power/turbostat: Add initial support for GraniteRapids
tools/power/turbostat: Add MSR_CORE_C1_RES support for spr_features
tools/power/turbostat: Move process to root cgroup
tools/power/turbostat: Handle cgroup v2 cpu limitation
tools/power/turbostat: Abstrct function for parsing cpu string
tools/power/turbostat: Handle offlined CPUs in cpu_subset
tools/power/turbostat: Obey allowed CPUs for system summary
tools/power/turbostat: Obey allowed CPUs for primary thread/core detection
tools/power/turbostat: Abstract several functions
tools/power/turbostat: Obey allowed CPUs during startup
tools/power/turbostat: Obey allowed CPUs when accessing CPU counters
tools/power/turbostat: Introduce cpu_allowed_set
tools/power/turbostat: Remove PC7/PC9 support on ADL/RPL
tools/power/turbostat: Enable MSR_CORE_C1_RES on recent Intel client platforms
...
|
|
Pull bcachefs fixes from Kent Overstreet:
"Lots of small fixes for minor nits and compiler warnings.
Bigger items:
- The six locks lost wakeup is finally fixed: six_read_trylock() was
checking for the waiting bit before decrementing the number of
readers - validated the fix with a torture test.
- Fix for a memory reclaim issue: when needing to reallocate a key
cache key, we now do our usual GFP_NOWAIT; unlock(); GFP_KERNEL
dance.
- Multiple deleted inodes btree fixes
- Fix an issue in fsck, where i_nlink would be recalculated
incorrectly for hardlinked files if a snapshot had ever been taken.
- Kill journal pre-reservations: This is a bigger patch than I would
normally send at this point, but it deletes code and it fixes some
of our tests that would sporadically die with the journal getting
stuck, and it's a performance improvement, too"
* tag 'bcachefs-2023-11-17' of https://evilpiepirate.org/git/bcachefs: (22 commits)
bcachefs: Fix missing locking for dentry->d_parent access
bcachefs: six locks: Fix lost wakeup
bcachefs: Fix no_data_io mode checksum check
bcachefs: Fix bch2_check_nlinks() for snapshots
bcachefs: Don't decrease BTREE_ITER_MAX when LOCKDEP=y
bcachefs: Disable debug log statements
bcachefs: Fix missing transaction commit
bcachefs: Fix error path in bch2_mount()
bcachefs: Fix potential sleeping during mount
bcachefs: Fix iterator leak in may_delete_deleted_inode()
bcachefs: Kill journal pre-reservations
bcachefs: Check for nonce offset inconsistency in data_update path
bcachefs: Make sure to drop/retake btree locks before reclaim
bcachefs: btree_trans->write_locked
bcachefs: Run btree key cache shrinker less aggressively
bcachefs: Split out btree_key_cache_types.h
bcachefs: Guard against insufficient devices to create stripes
bcachefs: Fix null ptr deref in bch2_backpointer_get_node()
bcachefs: Fix multiple -Warray-bounds warnings
bcachefs: Use DECLARE_FLEX_ARRAY() helper and fix multiple -Warray-bounds warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Thirteen hotfixes. Seven are cc:stable and the remainder pertain to
post-6.6 issues or aren't considered suitable for backporting"
* tag 'mm-hotfixes-stable-2023-11-17-14-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: more ptep_get() conversion
parisc: fix mmap_base calculation when stack grows upwards
mm/damon/core.c: avoid unintentional filtering out of schemes
mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors
mm/damon/sysfs-schemes: handle tried region directory allocation failure
mm/damon/sysfs-schemes: handle tried regions sysfs directory allocation failure
mm/damon/sysfs: check error from damon_sysfs_update_target()
mm: fix for negative counter: nr_file_hugepages
selftests/mm: add hugetlb_fault_after_madv to .gitignore
selftests/mm: restore number of hugepages
selftests: mm: fix some build warnings
selftests: mm: skip whole test instead of failure
mm/damon/sysfs: eliminate potential uninitialized variable warning
|
|
Pull block fix from Jens Axboe:
"Just a single fix from Christoph/Ming, fixing a case where integrity
IO could be called without having an appropriate queue reference"
* tag 'block-6.7-2023-11-17' of git://git.kernel.dk/linux:
blk-mq: make sure active queue usage is held for bio_integrity_prep()
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fixup for a change we made in this release, which caused
a regression in sometimes missing fdinfo output if the SQPOLL thread
had the lock held when fdinfo output was retrieved.
This brings us back on par with what we had before, where just the
main uring_lock will prevent that output. We'd love to get rid of that
too, but that is beyond the scope of this release and will have to
wait for 6.8"
* tag 'io_uring-6.7-2023-11-17' of git://git.kernel.dk/linux:
io_uring/fdinfo: remove need for sqpoll lock for thread/pid retrieval
|
|
Pull drm fixes from Daniel Vetter:
"This is a 'blast from the bast' fixes pull, because it contains a
bunch of AGP fixes for amdgpu. Otherwise nothing out of the ordinary.
Next week is back to Dave unless he's knocked out by some conference
bug.
- amdgpu: fixes all over, including a set of AGP fixes
- nouvea: GSP + other bugfixes
- ivpu build fix
- lenovo legion go panel orientation quirk"
* tag 'drm-fixes-2023-11-17' of git://anongit.freedesktop.org/drm/drm: (30 commits)
drm/amdgpu/gmc9: disable AGP aperture
drm/amdgpu/gmc10: disable AGP aperture
drm/amdgpu/gmc11: disable AGP aperture
drm/amdgpu: add a module parameter to control the AGP aperture
drm/amdgpu/gmc11: fix logic typo in AGP check
drm/amd/display: Fix encoder disable logic
drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox
drm/amdgpu: add and populate the port num into xgmi topology info
drm/amd/display: Negate IPS allow and commit bits
drm/amd/pm: Don't send unload message for reset
drm/amdgpu: fix ras err_data null pointer issue in amdgpu_ras.c
drm/amd/display: Clear dpcd_sink_ext_caps if not set
drm/amd/display: Enable fast plane updates on DCN3.2 and above
drm/amd/display: fix NULL dereference
drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer()
drm/amd/display: Add null checks for 8K60 lightup
drm/amd/pm: Fill pcie error counters for gpu v1_4
drm/amd/pm: Update metric table for smu v13_0_6
drm/amdgpu: correct chunk_ptr to a pointer to chunk.
drm/amd/display: Fix DSC not Enabled on Direct MST Sink
...
|
|
nfsd_cache_csum() currently assumes that the server's RPC layer has
been advancing rq_arg.head[0].iov_base as it decodes an incoming
request, because that's the way it used to work. On entry, it
expects that buf->head[0].iov_base points to the start of the NFS
header, and excludes the already-decoded RPC header.
These days however, head[0].iov_base now points to the start of the
RPC header during all processing. It no longer points at the NFS
Call header when execution arrives at nfsd_cache_csum().
In a retransmitted RPC the XID and the NFS header are supposed to
be the same as the original message, but the contents of the
retransmitted RPC header can be different. For example, for krb5,
the GSS sequence number will be different between the two. Thus if
the RPC header is always included in the DRC checksum computation,
the checksum of the retransmitted message might not match the
checksum of the original message, even though the NFS part of these
messages is identical.
The result is that, even if a matching XID is found in the DRC,
the checksum mismatch causes the server to execute the
retransmitted RPC transaction again.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The "statp + 1" pointer that is passed to nfsd_cache_update() is
supposed to point to the start of the egress NFS Reply header. In
fact, it does point there for AUTH_SYS and RPCSEC_GSS_KRB5 requests.
But both krb5i and krb5p add fields between the RPC header's
accept_stat field and the start of the NFS Reply header. In those
cases, "statp + 1" points at the extra fields instead of the Reply.
The result is that nfsd_cache_update() caches what looks to the
client like garbage.
A connection break can occur for a number of reasons, but the most
common reason when using krb5i/p is a GSS sequence number window
underrun. When an underrun is detected, the server is obliged to
drop the RPC and the connection to force a retransmit with a fresh
GSS sequence number. The client presents the same XID, it hits in
the server's DRC, and the server returns the garbage cache entry.
The "statp + 1" argument has been used since the oldest changeset
in the kernel history repo, so it has been in nfsd_dispatch()
literally since before history began. The problem arose only when
the server-side GSS implementation was added twenty years ago.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
When inserting a DRC-cached response into the reply buffer, ensure
that the reply buffer's xdr_stream is updated properly. Otherwise
the server will send a garbage response.
Cc: stable@vger.kernel.org # v6.3+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
seq_release should be called to free the allocated seq_file
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens")
Reviewed-by: NeilBrown <neilb@suse.de>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely")
changed the meaning of MAX_ORDER from exclusive to inclusive. So, we
can allocate compound pages with up to 1 << MAX_ORDER pages.
Reflect this change in dm-crypt and start trying to allocate compound
pages with MAX_ORDER.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The commit 5721d4e5a9cd enhanced dm-verity, so that it can verify blocks
from tasklets rather than from workqueues. This reportedly improves
performance significantly.
However, dm-verity was using the flag CRYPTO_TFM_REQ_MAY_SLEEP from
tasklets which resulted in warnings about sleeping function being called
from non-sleeping context.
BUG: sleeping function called from invalid context at crypto/internal.h:206
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0
preempt_count: 100, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 PID: 14 Comm: ksoftirqd/0 Tainted: G W 6.7.0-rc1 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
__might_resched+0x110/0x160
crypto_hash_walk_done+0x54/0xb0
shash_ahash_update+0x51/0x60
verity_hash_update.isra.0+0x4a/0x130 [dm_verity]
verity_verify_io+0x165/0x550 [dm_verity]
? free_unref_page+0xdf/0x170
? psi_group_change+0x113/0x390
verity_tasklet+0xd/0x70 [dm_verity]
tasklet_action_common.isra.0+0xb3/0xc0
__do_softirq+0xaf/0x1ec
? smpboot_thread_fn+0x1d/0x200
? sort_range+0x20/0x20
run_ksoftirqd+0x15/0x30
smpboot_thread_fn+0xed/0x200
kthread+0xdc/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x28/0x40
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
This commit fixes dm-verity so that it doesn't use the flags
CRYPTO_TFM_REQ_MAY_SLEEP and CRYPTO_TFM_REQ_MAY_BACKLOG from tasklets. The
crypto API would do GFP_ATOMIC allocation instead, it could return -ENOMEM
and we catch -ENOMEM in verity_tasklet and requeue the request to the
workqueue.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v6.0+
Fixes: 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
dm-bufio has a no-sleep mode. When activated (with the
DM_BUFIO_CLIENT_NO_SLEEP flag), the bufio client is read-only and we
could call dm_bufio_get from tasklets. This is used by dm-verity.
Unfortunately, commit 450e8dee51aa ("dm bufio: improve concurrent IO
performance") broke this and the kernel would warn that cache_get()
was calling down_read() from no-sleeping context. The bug can be
reproduced by using "veritysetup open" with the "--use-tasklets"
flag.
This commit fixes dm-bufio, so that the tasklet mode works again, by
expanding use of the 'no_sleep_enabled' static_key to conditionally
use either a rw_semaphore or rwlock_t (which are colocated in the
buffer_tree structure using a union).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v6.4
Fixes: 450e8dee51aa ("dm bufio: improve concurrent IO performance")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
This is small refactoring of dm-delay - we avoid duplicate logic in
flush_delayed_bios and flush_delayed_bios_fast and join these two
functions into one.
We also add cond_resched() to flush_delayed_bios because the list may have
unbounded number of entries.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
This commit fixes the following bugs introduced by commit 70bbeb29fab0
("dm delay: for short delays, use kthread instead of timers and wq"):
* the function flush_worker_fn has no exit path - on unload, this
function will just loop and consume 100% CPU without any progress
* the wake-up mechanism in flush_worker_fn is racy - a wake up will be
missed if the process adds entries to the delayed_bios list just
before set_current_state(TASK_INTERRUPTIBLE)
* flush_delayed_bios_fast submits a bio while holding a global mutex;
this may deadlock if we have multiple stacked dm-delay devices and
the underlying device attempts to acquire the mutex too
* if the target constructor fails, it will call delay_dtr. delay_dtr
would attempt to free dc->timer_lock without it being initialized by
the constructor.
* if the target constructor's kthread allocation fails, delay_dtr
would crash trying to dereference dc->worker because it is non-NULL
due to ERR_PTR.
Fixes: 70bbeb29fab0 ("dm delay: for short delays, use kthread instead of timers and wq")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
In delay_presuspend, we set the atomic variable may_delay and then stop
the timer and flush pending bios. The intention here is to prevent the
delay target from re-arming the timer again.
However, this test is racy. Suppose that one thread goes to delay_bio,
sees that dc->may_delay is one and proceeds; now, another thread executes
delay_presuspend, it sets dc->may_delay to zero, deletes the timer and
flushes pending bios. Then, the first thread continues and adds the bio to
delayed->list despite the fact that dc->may_delay is false.
Fix this bug by changing may_delay's type from atomic_t to bool and
only access it while holding the delayed_bios_lock mutex. Note that we
don't have to grab the mutex in delay_resume because there are no bios
in flight at this point.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Amir Goldstein:
"A fix to an overlayfs param parsing bug and a misformatted comment"
* tag 'ovl-fixes-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: fix memory leak in ovl_parse_param()
ovl: fix misformatted comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes: including a regression fix in RC1 wrt
HD-audio / i915 component binding, while the rest are HD-audio
device-speific fixes / quirks"
* tag 'sound-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add quirks for HP Laptops
ALSA: hda/realtek: Add quirks for ASUS 2024 Zenbooks
ALSA: hda: i915: Alays handle -EPROBE_DEFER
ALSA: hda/realtek: Enable Mute LED on HP 255 G10
ALSA: hda: cs35l56: Enable low-power hibernation mode on i2c
ALSA: hda/realtek - Enable internal speaker of ASUS K6500ZC
ALSA: hda/realtek: Enable Mute LED on HP 255 G8
ALSA: hda/realtek - Add Dell ALC295 to pin fall back table
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"One small audit patch to convert a WARN_ON_ONCE() into a normal
conditional to avoid scary looking console warnings when eBPF code
generates audit records from unexpected places"
* tag 'audit-pr-20231116' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: don't WARN_ON_ONCE(!current->mm) in audit_exe_compare()
|
|
Add a new `W:` field of the EROFS entry points to the documentation
site at <https://erofs.docs.kernel.org>.
In addition, update the in-tree documentation and Kconfig too.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231117085329.1624223-1-hsiangkao@linux.alibaba.com
|
|
Avoid NULL dereference of dif->bdev_handle, as dif->bdev_handle is NULL
in fscache mode.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:erofs_map_dev+0xbd/0x1c0
Call Trace:
<TASK>
erofs_fscache_data_read_slice+0xa7/0x340
erofs_fscache_data_read+0x11/0x30
erofs_fscache_readahead+0xd9/0x100
read_pages+0x47/0x1f0
page_cache_ra_order+0x1e5/0x270
filemap_get_pages+0xf2/0x5f0
filemap_read+0xb8/0x2e0
vfs_read+0x18d/0x2b0
ksys_read+0x53/0xd0
do_syscall_64+0x42/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Reported-by: Yiqun Leng <yqleng@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7245
Fixes: 49845720080d ("erofs: Convert to use bdev_open_by_path()")
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20231114070704.23398-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
After commit 1c7f49a76773 ("erofs: tidy up EROFS on-disk naming"),
there is a unique `union erofs_inode_i_u` so that we could parse
the union directly.
Besides, it also replaces `inode->i_sb` with `sb` for simplicity.
Signed-off-by: Ferry Meng <mengferry@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20231109111822.17944-1-mengferry@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.7-2023-11-17:
amdgpu:
- DMCUB fixes
- SR-IOV fix
- GMC9 fix
- Documentation fix
- DSC MST fix
- CS chunk parsing fix
- SMU13.0.6 fixes
- 8K tiled display fix
- Fix potential NULL pointer dereferences
- Cursor lag fix
- Backlight fix
- DCN s0ix fix
- XGMI fix
- DCN encoder disable logic fix
- AGP aperture fixes
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117063441.4883-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Assorted fixes for v6.7-rc2:
- Nouveau GSP fixes.
- Fix nouveau driver load without display.
- Use rwlock for nouveau's event lock to break a lockdep splat.
- Add orientation quirk for Lenovo Legion Go.
- Fix build failure in IVPU.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/98fc82d3-8714-45e7-bd12-c95ba8c6c35f@linux.intel.com
|
|
amd_pmc_get_dram_size() is used to get the DRAM size information. But
in the current code, mailbox command to get the DRAM size info is sent
based on the values of dev->major and dev->minor.
But dev->major and dev->minor will have either junk or zero assigned to
them until at least once a call to amd_pmc_get_smu_version() is made
which ideally populates dev->major and dev->minor.
However, adding a amd_pmc_get_smu_version() call to
amd_pmc_get_dram_size() has a downside of elevating the boot times.
After talking to the PMFW team, it's understood that the "get dram
size" mbox command would only be supported on specific platforms (like
Mendocino) and not all. So, adjust getting DRAM size behavior such
that,
- if running on Rembrandt or Mendocino and the underlying PMFW knows
how to execute the "get dram size" command it shall give the custom
dram size.
- if the underlying FW does not report the dram size, we just proceed
further and assign the default dram size.
The simplest way to address this is to remove amd_pmc_get_dram_size()
function and directly call the "get dram size" command in the
amd_pmc_s2d_init().
Reported-by: Mark Hasemeyer <markhas@chromium.org>
Fixes: be8325fb3d8c ("platform/x86/amd: pmc: Get STB DRAM size from PMFW")
Cc: stable@vger.kernel.org
Suggested-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231116170121.3372222-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
We've had misc reports of random IOMMU page faults when
this is used. It's just a rarely used optimization anyway, so
let's just disable it. It can still be toggled via the
module parameter for testing.
v2: leave it configurable via module parameter
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We've had misc reports of random IOMMU page faults when
this is used. It's just a rarely used optimization anyway, so
let's just disable it. It can still be toggled via the
module parameter for testing.
v2: leave it configurable via module parameter
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We've had misc reports of random IOMMU page faults when
this is used. It's just a rarely used optimization anyway, so
let's just disable it. It can still be toggled via the
module parameter for testing.
v2: leave it configurable via module parameter
Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11")
Reviewed-by: Yang Wang <kevinyang.wang@amd.com> (v1)
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add a module parameter to control the AGP aperture. The AGP
aperture is an aperture in the GPU's internal address space
which provides direct non-paged access to the platform address
space. This access is non-snooped so only uncached memory
can be accessed.
Add a knob so that we can toggle this for debugging.
Fixes: 67318cb84341 ("drm/amdgpu/gmc11: set gart placement GC11")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Should be && rather than ||.
Fixes: b2e1cbe6281f ("drm/amdgpu/gmc11: disable AGP on GC 11.5")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com> # PHX & Navi33
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
DENTIST hangs when OTG is off and encoder is on. We were not
disabling the encoder properly when switching from extended mode to
external monitor only.
[HOW]
Disable the encoder using an existing enable/disable fifo helper instead
of enc35_stream_encoder_enable.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Flush command sent to DMCUB spends more time for execution on
a dGPU than on an APU. This causes cursor lag when using high
refresh rate mouses.
[HOW]
1. Change the DMCUB mailbox memory location from FB to inbox.
2. Only change windows memory to inbox.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The port num info is firstly introduced with 20.00.01.13 xgmi ta and
make them as part of topology info.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
On s0i3, IPS mask isn't saved and restored.
It is reset to zero on exit.
If it is cleared unexpectedly, driver will
proceed operations while DCN is in IPS2 and
cause a hang.
[HOW]
Negate the bit logic. Default value of
zero indicates it is still in IPS2. Driver
must poll for the bit to assert.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No need to notify about unload during reset. Also remove the FW version
check.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
fix ras err_data null pointer issue in amdgpu_ras.c
Fixes: 8cc0f5669eb6 ("drm/amdgpu: Support multiple error query modes")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
Some eDP panels' ext caps don't set initial values
and the value of dpcd_addr (0x317) is random.
It means that sometimes the eDP can be OLED, miniLED and etc,
and cause incorrect backlight control interface.
[HOW]
Add remove_sink_ext_caps to remove sink ext caps (HDR, OLED and etc)
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
When cursor moves across screen boarder, lag cursor observed,
since subvp settings need to sync up with vblank that causes
cursor updates being delayed.
[HOW]
Enable fast plane updates on DCN3.2 to fix it.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The following patch will fix a minor issue where a debug message is
referencing an struct that has just being checked whether is null or
not. This has been noticed by using coccinelle, in the following output:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c:540:25-29: ERROR: aconnector is NULL but dereferenced.
Fixes: 5d72e247e58c ("drm/amd/display: switch DC over to the new DRM logging macros")
Signed-off-by: José Pekkarinen <jose.pekkarinen@foxhound.fi>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When ddc_service_construct() is called, it explicitly checks both the
link type and whether there is something on the link which will
dictate whether the pin is marked as hw_supported.
If the pin isn't set or the link is not set (such as from
unloading/reloading amdgpu in an IGT test) then fail the
amdgpu_dm_i2c_xfer() call.
Cc: stable@vger.kernel.org
Fixes: 22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1")
Link: https://github.com/fwupd/fwupd/issues/6327
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Add some null checks to fix an issue where 8k60
tiled display fails to light up.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fill PCIE error counters & instantaneous bandwidth
in gpu metrics v1_4 for smu v_13_0_6
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update pmfw metric table to include pcie
instantaneous bandwidth & pcie error counters
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The variable "chunk_ptr" should be a pointer pointing
to a struct drm_amdgpu_cs_chunk instead of to a pointer
of that.
Signed-off-by: YuanShang <YuanShang.Mao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
For the scenario when a dsc capable MST sink device is directly
connected, it needs to use max dsc compression as the link bw constraint.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Roman Li <roman.li@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
uvd_entity_init()'
Fixes the following:
drivers/gpu/drm/amd/amdgpu/amdgpu_vce.c:237: warning: Function parameter or member 'ring' not described in 'amdgpu_vce_entity_init'
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:405: warning: Function parameter or member 'ring' not described in 'amdgpu_uvd_entity_init'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The valid num_mem_partitions is required during ttm pool fini,
thus move the cleanup at the end of the function.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MC_VM_AGP_* registers should not be programmed by guest driver.
v2: move early return outside of loop
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Samir Dhume <samir.dhume@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
HW can return invalid values on register read, guard against these being
set and causing us to access memory out of range and page fault.
[HOW]
Guard at sync_inbox1 and guard at pushing commands.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, sym_validate_range() duplicates the range string using
xstrdup(), which is overwritten by a subsequent sym_calc_value() call.
It results in a memory leak.
Instead, only the pointer should be copied.
Below is a test case, with a summary from Valgrind.
[Test Kconfig]
config FOO
int "foo"
range 10 20
[Test .config]
CONFIG_FOO=0
[Before]
LEAK SUMMARY:
definitely lost: 3 bytes in 1 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 17,465 bytes in 21 blocks
suppressed: 0 bytes in 0 blocks
[After]
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 17,462 bytes in 20 blocks
suppressed: 0 bytes in 0 blocks
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Add quotes where UIMAGE_NAME is used, rather than where it is defined.
This allows the UIMAGE_NAME variable to be set by the user.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
With commit cf8e8658100d ("arch: Remove Itanium (IA-64) architecture"),
there is no need to keep the IA-64 definition of the KSYM_FUNC macro.
Clean up the IA-64 definition of the KSYM_FUNC macro.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from BPF and netfilter.
Current release - regressions:
- core: fix undefined behavior in netdev name allocation
- bpf: do not allocate percpu memory at init stage
- netfilter: nf_tables: split async and sync catchall in two
functions
- mptcp: fix possible NULL pointer dereference on close
Current release - new code bugs:
- eth: ice: dpll: fix initial lock status of dpll
Previous releases - regressions:
- bpf: fix precision backtracking instruction iteration
- af_unix: fix use-after-free in unix_stream_read_actor()
- tipc: fix kernel-infoleak due to uninitialized TLV value
- eth: bonding: stop the device in bond_setup_by_slave()
- eth: mlx5:
- fix double free of encap_header
- avoid referencing skb after free-ing in drop path
- eth: hns3: fix VF reset
- eth: mvneta: fix calls to page_pool_get_stats
Previous releases - always broken:
- core: set SOCK_RCU_FREE before inserting socket into hashtable
- bpf: fix control-flow graph checking in privileged mode
- eth: ppp: limit MRU to 64K
- eth: stmmac: avoid rx queue overrun
- eth: icssg-prueth: fix error cleanup on failing initialization
- eth: hns3: fix out-of-bounds access may occur when coalesce info is
read via debugfs
- eth: cortina: handle large frames
Misc:
- selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45"
* tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
macvlan: Don't propagate promisc change to lower dev in passthru
net: sched: do not offload flows with a helper in act_ct
net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors
net/mlx5e: Check return value of snprintf writing to fw_version buffer
net/mlx5e: Reduce the size of icosq_str
net/mlx5: Increase size of irq name buffer
net/mlx5e: Update doorbell for port timestamping CQ before the software counter
net/mlx5e: Track xmit submission to PTP WQ after populating metadata map
net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe
net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload
net/mlx5e: Fix pedit endianness
net/mlx5e: fix double free of encap_header in update funcs
net/mlx5e: fix double free of encap_header
net/mlx5: Decouple PHC .adjtime and .adjphase implementations
net/mlx5: DR, Allow old devices to use multi destination FTE
net/mlx5: Free used cpus mask when an IRQ is released
Revert "net/mlx5: DR, Supporting inline WQE when possible"
bpf: Do not allocate percpu memory at init stage
net: Fix undefined behavior in netdev name allocation
dt-bindings: net: ethernet-controller: Fix formatting error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A fix in the Xen events driver avoiding the use of RCU after
the call to rcu_report_dead() when taking a cpu down
- A fix for running as Xen dom0 to line up ACPI's idea of power
management capabilities with the one of Xen
- A cleanup eliminating several kernel-doc warnings in Xen related
code
- A cleanup series of the Xen events driver
* tag 'for-linus-6.7a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: remove some info_for_irq() calls in pirq handling
xen/events: modify internal [un]bind interfaces
xen/events: drop xen_allocate_irqs_dynamic()
xen/events: remove some simple helpers from events_base.c
xen/events: reduce externally visible helper functions
xen/events: remove unused functions
xen/events: fix delayed eoi list handling
xen/shbuf: eliminate 17 kernel-doc warnings
acpi/processor: sanitize _OSC/_PDC capabilities for Xen dom0
xen/events: avoid using info_for_irq() in xen_send_IPI_one()
|
|
Pull virtio fixes from Michael Tsirkin:
"Bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix use after free in vhost_vdpa_probe()
virtio_pci: Switch away from deprecated irq_set_affinity_hint
riscv, qemu_fw_cfg: Add support for RISC-V architecture
vdpa_sim_blk: allocate the buffer zeroed
virtio_pci: move structure to a header
|
|
The section mismatch check prints a bogus symbol name on some
architectures.
[test code]
#include <linux/init.h>
int __initdata foo;
int get_foo(void) { return foo; }
If you compile it with GCC for riscv or loongarch, modpost will show an
incorrect symbol name:
WARNING: modpost: vmlinux: section mismatch in reference: get_foo+0x8 (section: .text) -> done (section: .init.data)
To get the correct symbol address, the st_value must be added.
This issue has never been noticed since commit 93684d3b8062 ("kbuild:
include symbol names in section mismatch warnings") presumably because
st_value becomes zero on most architectures when the referenced symbol
is looked up. It is not true for riscv or loongarch, at least.
With this fix, modpost will show the correct symbol name:
WARNING: modpost: vmlinux: section mismatch in reference: get_foo+0x8 (section: .text) -> foo (section: .init.data)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Remove unused variable causing compilation warning in nft_set_rbtree,
from Yang Li. This unused variable is a left over from previous
merge window.
2) Possible return of uninitialized in nf_conntrack_bridge, from
Linkui Xiao. This is there since nf_conntrack_bridge is available.
3) Fix incorrect pointer math in nft_byteorder, from Dan Carpenter.
Problem has been there since 2016.
4) Fix bogus error in destroy set element command. Problem is there
since this new destroy command was added.
5) Fix race condition in ipset between swap and destroy commands and
add/del/test control plane. This problem is there since ipset was
merged.
6) Split async and sync catchall GC in two function to fix unsafe
iteration over RCU. This is a fix-for-fix that was included in
the previous pull request.
* tag 'nf-23-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: split async and sync catchall in two functions
netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test
netfilter: nf_tables: bogus ENOENT when destroying element which does not exist
netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()
netfilter: nf_conntrack_bridge: initialize err to 0
netfilter: nft_set_rbtree: Remove unused variable nft_net
====================
Link: https://lore.kernel.org/r/20231115184514.8965-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Macvlan device in passthru mode sets its lower device promiscuous mode
according to its MACVLAN_FLAG_NOPROMISC flag instead of synchronizing it to
its own promiscuity setting. However, macvlan_change_rx_flags() function
doesn't check the mode before propagating such changes to the lower device
which can cause net_device->promiscuity counter overflow as illustrated by
reproduction example [0] and resulting dmesg log [1]. Fix the issue by
first verifying the mode in macvlan_change_rx_flags() function before
propagating promiscuous mode change to the lower device.
[0]:
ip link add macvlan1 link enp8s0f0 type macvlan mode passthru
ip link set macvlan1 promisc on
ip l set dev macvlan1 up
ip link set macvlan1 promisc off
ip l set dev macvlan1 down
ip l set dev macvlan1 up
[1]:
[ 5156.281724] macvlan1: entered promiscuous mode
[ 5156.285467] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.287639] macvlan1: left promiscuous mode
[ 5156.288339] mlx5_core 0000:08:00.0 enp8s0f0: left promiscuous mode
[ 5156.290907] mlx5_core 0000:08:00.0 enp8s0f0: entered promiscuous mode
[ 5156.317197] mlx5_core 0000:08:00.0 enp8s0f0: promiscuity touches roof, set promiscuity failed. promiscuity feature of device might be broken.
Fixes: efdbd2b30caa ("macvlan: Propagate promiscuity setting to lower devices.")
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231114175915.1649154-1-vladbu@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no hardware supporting ct helper offload. However, prior to this
patch, a flower filter with a helper in the ct action can be successfully
set into the HW, for example (eth1 is a bnxt NIC):
# tc qdisc add dev eth1 ingress_block 22 ingress
# tc filter add block 22 proto ip flower skip_sw ip_proto tcp \
dst_port 21 ct_state -trk action ct helper ipv4-tcp-ftp
# tc filter show dev eth1 ingress
filter block 22 protocol ip pref 49152 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
dst_port 21
ct_state -trk
skip_sw
in_hw in_hw_count 1 <----
action order 1: ct zone 0 helper ipv4-tcp-ftp pipe
index 2 ref 1 bind 1
used_hw_stats delayed
This might cause the flower filter not to work as expected in the HW.
This patch avoids this problem by simply returning -EOPNOTSUPP in
tcf_ct_offload_act_setup() to not allow to offload flows with a helper
in act_ct.
Fixes: a21b06e73191 ("net: sched: add helper support in act_ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/f8685ec7702c4a448a1371a8b34b43217b583b9d.1699898008.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Saeed Mahameed says:
====================
This series provides bug fixes to mlx5 driver.
====================
Link: https://lore.kernel.org/r/20231114215846.5902-1-saeed@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
representors
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails. This logic for representors is identical to normal flow
with ethtool.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c: In function 'mlx5e_rep_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:78:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
78 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:77:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
77 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
78 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
79 | fw_rev_maj(mdev), fw_rev_min(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
80 | fw_rev_sub(mdev), mdev->board_id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: cf83c8fdcd47 ("net/mlx5e: Add missing ethtool driver info for representors")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Treat the operation as an error case when the return value is equivalent to
the size of the name buffer. Failed to write null terminator to the name
buffer, making the string malformed and should not be used. Provide a
string with only the firmware version when forming the string with the
board id fails.
Without check, will trigger -Wformat-truncation with W=1.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_ethtool_get_drvinfo':
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:49:31: warning: '%.16s' directive output may be truncated writing up to 16 bytes into a region of size between 13 and 22 [-Wformat-truncation=]
49 | "%d.%d.%04d (%.16s)",
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:48:9: note: 'snprintf' output between 12 and 37 bytes into a destination of size 32
48 | snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
49 | "%d.%d.%04d (%.16s)",
| ~~~~~~~~~~~~~~~~~~~~~
50 | fw_rev_maj(mdev), fw_rev_min(mdev), fw_rev_sub(mdev),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
51 | mdev->board_id);
| ~~~~~~~~~~~~~~~
Fixes: 84e11edb71de ("net/mlx5e: Show board id in ethtool driver information")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
icosq_str size is unnecessarily too long, and it causes a build warning
-Wformat-truncation with W=1. Looking closely, It doesn't need to be 255B,
hence this patch reduces the size to 32B which should be more than enough
to host the string: "ICOSQ: 0x%x, ".
While here, add a missing space in the formatted string.
This fixes the following build warning:
$ KCFLAGS='-Wall -Werror'
$ make O=/tmp/kbuild/linux W=1 -s -j12 drivers/net/ethernet/mellanox/mlx5/core/
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c: In function 'mlx5e_reporter_rx_timeout':
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:718:56:
error: ', CQ: 0x' directive output may be truncated writing 8 bytes into a region of size between 0 and 255 [-Werror=format-truncation=]
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en/reporter_rx.c:717:9: note: 'snprintf' output between 43 and 322 bytes into a destination of size 288
717 | snprintf(err_str, sizeof(err_str),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
718 | "RX timeout on channel: %d, %sRQ: 0x%x, CQ: 0x%x",
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
719 | rq->ix, icosq_str, rq->rqn, rq->cq.mcq.cqn);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 521f31af004a ("net/mlx5e: Allow RQ outside of channel context")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Without increased buffer size, will trigger -Wformat-truncation with W=1
for the snprintf operation writing to the buffer.
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c: In function 'mlx5_irq_alloc':
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:296:7: error: '@pci:' directive output may be truncated writing 5 bytes into a region of size between 1 and 32 [-Werror=format-truncation=]
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ^~~~~
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c:295:2: note: 'snprintf' output 6 or more bytes (assuming 37) into a destination of size 32
295 | snprintf(irq->name, MLX5_MAX_IRQ_NAME,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
296 | "%s@pci:%s", name, pci_name(dev->pdev));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: ada9f5d00797 ("IB/mlx5: Fix eq names to display nicely in /proc/interrupts")
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6d4ab2e97dcfbcd748ae71761a9d8e5e41cc732c
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, mlx5e_ptp_poll_ts_cq would update the device doorbell with the
incremented consumer index after the relevant software counters in the
kernel were updated. In the mlx5e_sq_xmit_wqe context, this would lead to
either overrunning the device CQ or exceeding the expected software buffer
size in the device CQ if the device CQ size was greater than the software
buffer size. Update the relevant software counter only after updating the
device CQ consumer index in the port timestamping napi_poll context.
Log:
mlx5_core 0000:08:00.0: cq_err_event_notifier:517:(pid 0): CQ error on CQN 0x487, syndrome 0x1
mlx5_core 0000:08:00.0 eth2: mlx5e_cq_error_event: cqn=0x000487 event=0x04
Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Ensure the skb is available in metadata mapping to skbs before tracking the
metadata index for detecting undelivered CQEs. If the metadata index is put
in the tracking list before putting the skb in the map, the metadata index
might be used for detecting undelivered CQEs before the relevant skb is
available in the map, which can lead to a null-ptr-deref.
Log:
general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 0 PID: 1243 Comm: kworker/0:2 Not tainted 6.6.0-rc4+ #108
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events mlx5e_rx_dim_work [mlx5_core]
RIP: 0010:mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core]
Code: 8c 24 38 cc ff ff 4c 8d 3c c1 4c 89 f9 48 c1 e9 03 42 80 3c 31 00 0f 85 97 0f 00 00 4d 8b 3f 49 8d 7f 28 48 89 f9 48 c1 e9 03 <42> 80 3c 31 00 0f 85 8b 0f 00 00 49 8b 47 28 48 85 c0 0f 84 05 07
RSP: 0018:ffff8884d3c09c88 EFLAGS: 00010206
RAX: 0000000000000069 RBX: ffff8881160349d8 RCX: 0000000000000005
RDX: ffffed10218f48cf RSI: 0000000000000004 RDI: 0000000000000028
RBP: ffff888122707700 R08: 0000000000000001 R09: ffffed109a781383
R10: 0000000000000003 R11: 0000000000000003 R12: ffff88810c7a7a40
R13: ffff888122707700 R14: dffffc0000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8884d3c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f4f878dd6e0 CR3: 000000014d108002 CR4: 0000000000370eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
? die_addr+0x3c/0xa0
? exc_general_protection+0x144/0x210
? asm_exc_general_protection+0x22/0x30
? mlx5e_ptp_napi_poll+0x9a4/0x2290 [mlx5_core]
? mlx5e_ptp_napi_poll+0x8f6/0x2290 [mlx5_core]
__napi_poll.constprop.0+0xa4/0x580
net_rx_action+0x460/0xb80
? _raw_spin_unlock_irqrestore+0x32/0x60
? __napi_poll.constprop.0+0x580/0x580
? tasklet_action_common.isra.0+0x2ef/0x760
__do_softirq+0x26c/0x827
irq_exit_rcu+0xc2/0x100
common_interrupt+0x7f/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:__kmem_cache_alloc_node+0xb/0x330
Code: 41 5d 41 5e 41 5f c3 8b 44 24 14 8b 4c 24 10 09 c8 eb d5 e8 b7 43 ca 01 0f 1f 80 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 57 <41> 56 41 89 d6 41 55 41 89 f5 41 54 49 89 fc 53 48 83 e4 f0 48 83
RSP: 0018:ffff88812c4079c0 EFLAGS: 00000246
RAX: 1ffffffff083c7fe RBX: ffff888100042dc0 RCX: 0000000000000218
RDX: 00000000ffffffff RSI: 0000000000000dc0 RDI: ffff888100042dc0
RBP: ffff88812c4079c8 R08: ffffffffa0289f96 R09: ffffed1025880ea9
R10: ffff888138839f80 R11: 0000000000000002 R12: 0000000000000dc0
R13: 0000000000000100 R14: 000000000000008c R15: ffff8881271fc450
? cmd_exec+0x796/0x2200 [mlx5_core]
kmalloc_trace+0x26/0xc0
cmd_exec+0x796/0x2200 [mlx5_core]
mlx5_cmd_do+0x22/0xc0 [mlx5_core]
mlx5_cmd_exec+0x17/0x30 [mlx5_core]
mlx5_core_modify_cq_moderation+0x139/0x1b0 [mlx5_core]
? mlx5_add_cq_to_tasklet+0x280/0x280 [mlx5_core]
? lockdep_set_lock_cmp_fn+0x190/0x190
? process_one_work+0x659/0x1220
mlx5e_rx_dim_work+0x9d/0x100 [mlx5_core]
process_one_work+0x730/0x1220
? lockdep_hardirqs_on_prepare+0x400/0x400
? max_active_store+0xf0/0xf0
? assign_work+0x168/0x240
worker_thread+0x70f/0x12d0
? __kthread_parkme+0xd1/0x1d0
? process_one_work+0x1220/0x1220
kthread+0x2d9/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse
---[ end trace 0000000000000000 ]---
Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5e_sq_xmit_wqe
When SQ is a port timestamping SQ for PTP, do not access tx flags of skb
after free-ing the skb. Free the skb only after all references that depend
on it have been handled in the dropped WQE path.
Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As IPSec packet offload in switchdev mode is not supported with LAG,
it's unnecessary to modify those sent-to-vport rules to the peer eswitch.
Fixes: c6c2bf5db4ea ("net/mlx5e: Support IPsec packet offload for TX in switchdev mode")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Referenced commit addressed endianness issue in mlx5 pedit implementation
in ad hoc manner instead of systematically treating integer values
according to their types which left pedit fields of sizes not equal to 4
and where the bytes being modified are not least significant ones broken on
big endian machines since wrong bits will be consumed during parsing which
leads to following example error when applying pedit to source and
destination MAC addresses:
[Wed Oct 18 12:52:42 2023] mlx5_core 0001:00:00.1 p1v3_r: attempt to offload an unsupported field (cmd 0)
[Wed Oct 18 12:52:42 2023] mask: 00000000330c5b68: 00 00 00 00 ff ff 00 00 00 00 ff ff 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000017d22fd9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000008186d717: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 0000000029eb6149: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 000000007ed103e4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000db8101a6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[Wed Oct 18 12:52:42 2023] mask: 00000000ec3c08a9: 00 00 00 00 00 00 00 00 00 00 00 00 ............
Treat masks and values of pedit and filter match as network byte order,
refactor pointers to them to void pointers instead of confusing u32
pointers and only cast to pointer-to-integer when reading a value from
them. Treat pedit mlx5_fields->field_mask as host byte order according to
its type u32, change the constants in fields array accordingly.
Fixes: 82198d8bcdef ("net/mlx5e: Fix endianness when calculating pedit mask first bit")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Follow up to the previous patch to fix the same issue for
mlx5e_tc_tun_update_header_ipv4{6} when mlx5_packet_reformat_alloc()
fails.
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_update_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.
mlx5e_encap_put()
--> mlx5e_encap_dealloc()
--> kfree(e->encap_header)
This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail.
This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.
Fixes: d589e785baf5e ("net/mlx5e: Allow concurrent creation of encap entries")
Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com>
Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When running a phase adjustment operation, the free running clock should
not be modified at all. The phase control keyword is intended to trigger an
internal servo on the device that will converge to the provided delta. A
free running counter cannot implement phase adjustment.
Fixes: 8e11a68e2e8a ("net/mlx5: Add adjphase function to support hardware-only offset control")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current check isn't aware of old devices that don't have the
relevant FW capability. This patch allows multi destination FTE
in old cards, as it was before this check.
Fixes: f6f46e7173cb ("net/mlx5: DR, Add check for multi destination FTE")
Signed-off-by: Erez Shitrit <erezsh@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-4-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each EQ table maintains a cpumask of the already used CPUs that are mapped
to IRQs to ensure that each IRQ gets mapped to a unique CPU.
However, on IRQ release, the said cpumask is not updated by clearing the
CPU from the mask to allow future IRQ request, causing the following
error when a SF is reloaded after it has utilized all CPUs for its IRQs:
mlx5_irq_affinity_request:135:(pid 306010): Didn't find a matching IRQ.
err = -28
Thus, when releasing an IRQ, clear its mapped CPU from the used CPUs
mask, to prevent the case described above.
While at it, move the used cpumask update to the EQ layer as it is more
fitting and preserves symmetricity of the IRQ request/release API.
Fixes: a1772de78d73 ("net/mlx5: Refactor completion IRQ request/release API")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 95c337cce0e11d06a715da73e6796ade9216637f.
The revert is required due to the suspicion it cause some tests
fail and will be moved to further investigation.
Fixes: 95c337cce0e1 ("net/mlx5: DR, Supporting inline WQE when possible")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20231114215846.5902-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2023-11-15
We've added 7 non-merge commits during the last 6 day(s) which contain
a total of 9 files changed, 200 insertions(+), 49 deletions(-).
The main changes are:
1) Do not allocate bpf specific percpu memory unconditionally, from Yonghong.
2) Fix precision backtracking instruction iteration, from Andrii.
3) Fix control flow graph checking, from Andrii.
4) Fix xskxceiver selftest build, from Anders.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Do not allocate percpu memory at init stage
selftests/bpf: add more test cases for check_cfg()
bpf: fix control-flow graph checking in privileged mode
selftests/bpf: add edge case backtracking logic test
bpf: fix precision backtracking instruction iteration
bpf: handle ldimm64 properly in check_cfg()
selftests: bpf: xskxceiver: ksft_print_msg: fix format type error
====================
Link: https://lore.kernel.org/r/20231115214949.48854-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit c33c794828f2 ("mm: ptep_get() conversion") converted all (non-arch)
call sites to use ptep_get() instead of doing a direct dereference of the
pte. Full rationale can be found in that commit's log.
Since then, three new call sites have snuck in, which directly dereference
the pte, so let's fix those up.
Unfortunately there is no reliable automated mechanism to catch these; I'm
relying on a combination of Coccinelle (which throws up a lot of false
positives) and some compiler magic to force a compiler error on
dereference (While this approach finds dereferences, it also yields a
non-booting kernel so can't be committed).
Link: https://lkml.kernel.org/r/20231114154945.490401-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Matoro reported various userspace crashes on the parisc platform with kernel
6.6 and bisected it to commit 3033cd430768 ("parisc: Use generic mmap top-down
layout and brk randomization").
That commit switched parisc to use the common infrastructure to calculate
mmap_base, but missed that the mmap_base() function takes care for
architectures where the stack grows downwards only.
Fix the mmap_base() calculation to include the stack-grows-upwards case
and thus fix the userspace crashes on parisc.
Link: https://lkml.kernel.org/r/ZVH2qeS1bG7/1J/l@p100
Fixes: 3033cd430768 ("parisc: Use generic mmap top-down layout and brk randomization")
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The function '__damos_filter_out()' causes DAMON to always filter out
schemes whose filter type is anon or memcg if its matching value is set
to false.
This commit addresses the issue by ensuring that '__damos_filter_out()'
no longer applies to filters whose type is 'anon' or 'memcg'.
Link: https://lkml.kernel.org/r/1699594629-3816-1-git-send-email-hyeongtak.ji@gmail.com
Fixes: ab9bda001b681 ("mm/damon/core: introduce address range type damos filter")
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Objcg vectors attached to slab pages to store slab object ownership
information are allocated using gfp flags for the original slab
allocation. Depending on slab page order and the size of slab objects,
objcg vector can take several pages.
If the original allocation was done with the __GFP_NOFAIL flag, it
triggered a warning in the page allocation code. Indeed, order > 1 pages
should not been allocated with the __GFP_NOFAIL flag.
Fix this by simply dropping the __GFP_NOFAIL flag when allocating the
objcg vector. It effectively allows to skip the accounting of a single
slab object under a heavy memory pressure.
An alternative would be to implement the mechanism to fallback to order-0
allocations for accounting metadata, which is also not perfect because it
will increase performance penalty and memory footprint of the kernel
memory accounting under memory pressure.
Link: https://lkml.kernel.org/r/ZUp8ZFGxwmCx4ZFr@P9FQF9L96D.corp.robot.car
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: Christoph Lameter <cl@linux.com>
Closes: https://lkml.kernel.org/r/6b42243e-f197-600a-5d22-56bd728a5ad8@gentwo.org
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMON sysfs interface's before_damos_apply callback
(damon_sysfs_before_damos_apply()), which creates the DAMOS tried regions
for each DAMOS action applied region, is not handling the allocation
failure for the sysfs directory data. As a result, NULL pointer
derefeence is possible. Fix it by handling the case.
Link: https://lkml.kernel.org/r/20231106233408.51159-4-sj@kernel.org
Fixes: f1d13cacabe1 ("mm/damon/sysfs: implement DAMOS tried regions update command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
DAMOS tried regions sysfs directory allocation function
(damon_sysfs_scheme_regions_alloc()) is not handling the memory allocation
failure. In the case, the code will dereference NULL pointer. Handle the
failure to avoid such invalid access.
Link: https://lkml.kernel.org/r/20231106233408.51159-3-sj@kernel.org
Fixes: 9277d0367ba1 ("mm/damon/sysfs-schemes: implement scheme region directory")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon/sysfs: fix unhandled return values".
Some of DAMON sysfs interface code is not handling return values from some
functions. As a result, confusing user input handling or NULL-dereference
is possible. Check those properly.
This patch (of 3):
damon_sysfs_update_target() returns error code for failures, but its
caller, damon_sysfs_set_targets() is ignoring that. The update function
seems making no critical change in case of such failures, but the behavior
will look like DAMON sysfs is silently ignoring or only partially
accepting the user input. Fix it.
Link: https://lkml.kernel.org/r/20231106233408.51159-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231106233408.51159-2-sj@kernel.org
Fixes: 19467a950b49 ("mm/damon/sysfs: remove requested targets when online-commit inputs")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
While qualifiying the 6.4 release, the following warning was detected in
messages:
vmstat_refresh: nr_file_hugepages -15664
The warning is caused by the incorrect updating of the NR_FILE_THPS
counter in the function split_huge_page_to_list. The if case is checking
for folio_test_swapbacked, but the else case is missing the check for
folio_test_pmd_mappable. The other functions that manipulate the counter
like __filemap_add_folio and filemap_unaccount_folio have the
corresponding check.
I have a test case, which reproduces the problem. It can be found here:
https://github.com/sroeschus/testcase/blob/main/vmstat_refresh/madv.c
The test case reproduces on an XFS filesystem. Running the same test
case on a BTRFS filesystem does not reproduce the problem.
AFAIK version 6.1 until 6.6 are affected by this problem.
[akpm@linux-foundation.org: whitespace fix]
[shr@devkernel.io: test for folio_test_pmd_mappable()]
Link: https://lkml.kernel.org/r/20231108171517.2436103-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20231106181918.1091043-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Co-debugged-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb")
added a new test case, but, it didn't add the binary name in
tools/testing/selftests/mm/.gitignore.
Add hugetlb_fault_after_madv to tools/testing/selftests/mm/.gitignore.
Link: https://lkml.kernel.org/r/20231103173400.1608403-2-leitao@debian.org
Fixes: 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/all/662df57e-47f1-4c15-9b84-f2f2d587fc5c@arm.com/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test mm `hugetlb_fault_after_madv` selftest needs one and only one
huge page to run, thus it sets `/proc/sys/vm/nr_hugepages` to 1.
The problem is that further tests require the previous number of hugepages
allocated in order to succeed.
Save the number of huge pages before changing it, and restore it once the
test finishes, so, further tests could run successfully.
Link: https://lkml.kernel.org/r/20231103173400.1608403-1-leitao@debian.org
Fixes: 116d57303a05 ("selftests/mm: add a new test for madv and hugetlb")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/all/662df57e-47f1-4c15-9b84-f2f2d587fc5c@arm.com/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix build warnings:
pagemap_ioctl.c:1154:38: warning: format `%s' expects a matching `char *' argument [-Wformat=]
pagemap_ioctl.c:1162:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
pagemap_ioctl.c:1192:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
pagemap_ioctl.c:1600:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
pagemap_ioctl.c:1628:51: warning: format `%ld' expects argument of type `long int', but argument 2 has type `int' [-Wformat=]
Link: https://lkml.kernel.org/r/20231103182343.2874015-2-usama.anjum@collabora.com
Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Some architectures don't support userfaultfd. Skip running the whole test
on them instead of registering the failure.
Link: https://lkml.kernel.org/r/20231103182343.2874015-1-usama.anjum@collabora.com
Fixes: 46fd75d4a3c9 ("selftests: mm: add pagemap ioctl tests")
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/all/f8463381-2697-49e9-9460-9dc73452830d@arm.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The "err" variable is not initialized if damon_target_has_pid(ctx) is
false and sys_target->regions->nr is zero.
Link: https://lkml.kernel.org/r/739e6aaf-a634-4e33-98a8-16546379ec9f@moroto.mountain
Fixes: 0bcd216c4741 ("mm/damon/sysfs: update monitoring target regions for online input commit")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These HP laptops use Realtek HDA codec combined with 2 or 4 CS35L41
Amplifiers using SPI with Internal Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115162116.494968-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
These ASUS Zenbook laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using SPI or I2C with External Boost or
Internal Boost.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231115162116.494968-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If we get back ENODEV don't fail load. There are nvidia devices
that don't have display blocks and the driver should work on those.
Fixes: 15740541e8f0 ("drm/nouveau/devinit/tu102-: prepare for GSP-RM")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/270
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115143933.261287-1-airlied@gmail.com
|
|
The Legion Go has a 2560x1600 portrait screen, with the native "up" facing
the right controller (90° CW from the rest of the device).
Signed-off-by: Brenton Simpson <appsforartists@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231114233859.274189-1-appsforartists@google.com
|
|
Kirill Shutemov reported significant percpu memory consumption increase after
booting in 288-cpu VM ([1]) due to commit 41a5db8d8161 ("bpf: Add support for
non-fix-size percpu mem allocation"). The percpu memory consumption is
increased from 111MB to 969MB. The number is from /proc/meminfo.
I tried to reproduce the issue with my local VM which at most supports upto
255 cpus. With 252 cpus, without the above commit, the percpu memory
consumption immediately after boot is 57MB while with the above commit the
percpu memory consumption is 231MB.
This is not good since so far percpu memory from bpf memory allocator is not
widely used yet. Let us change pre-allocation in init stage to on-demand
allocation when verifier detects there is a need of percpu memory for bpf
program. With this change, percpu memory consumption after boot can be reduced
signicantly.
[1] https://lore.kernel.org/lkml/20231109154934.4saimljtqx625l3v@box.shutemov.name/
Fixes: 41a5db8d8161 ("bpf: Add support for non-fix-size percpu mem allocation")
Reported-and-tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231111013928.948838-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A previous commit added a trylock for getting the SQPOLL thread info via
fdinfo, but this introduced a regression where we often fail to get it if
the thread is busy. For that case, we end up not printing the current CPU
and PID info.
Rather than rely on this lock, just print the pid we already stored in
the io_sq_data struct, and ensure we update the current CPU every time
we've slept or potentially rescheduled. The latter won't potentially be
100% accurate, but that wasn't the case before either as the task can
get migrated at any time unless it has been pinned at creation time.
We retain keeping the io_sq_data dereference inside the ctx->uring_lock,
as it has always been, as destruction of the thread and data happen below
that. We could make this RCU safe, but there's little point in doing that.
With this, we always print the last valid information we had, rather than
have spurious outputs with missing information.
Fixes: 7644b1a1c9a7 ("io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
acpi_object *obj is unused in this function, so delete it, also
delete a unnecessary kfree(obj);
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-4-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
'attr_name_kobj' is allocated using kzalloc, but on all the error paths
it is not freed, hence we have a memory leak.
Fix the error path before kobject_init_and_add() by adding kfree().
kobject_put() must be always called after passing the object to
kobject_init_and_add(). Only the error path which is immediately next
to kobject_init_and_add() calls kobject_put() and not any other error
path after it.
Fix the error handling after kobject_init_and_add() by moving the
kobject_put() into the goto label err_other_attr_init that is already
used by all the error paths after kobject_init_and_add().
Fixes: a34fc329b189 ("platform/x86: hp-bioscfg: bioscfg")
Cc: stable@vger.kernel.org # 6.6.x: c5dbf0416000: platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes()
Cc: stable@vger.kernel.org # 6.6.x: 5736aa9537c9: platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes()
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309201412.on0VXJGo-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ij: Added the stable dep tags]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-3-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It turns out that even if the comment says that the driver can load
fine, it's not really the case and no codecs are detected.
Specifically for -EPROBE_DEFER, always fail the probe.
This fixes a regression when HDA-intel is loaded before i915.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: https://lore.kernel.org/r/ZVNUxZzCGcxQzqJX@intel.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Fixes: e6d0c13e9f46 ("ALSA: hda: i915: Remove extra argument from snd_hdac_i915_init")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9671
Link: https://lore.kernel.org/r/20231115123625.74286-1-maarten.lankhorst@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
attr_name_kobj's memory allocation is done with mutex_lock() held, this
is not needed.
Move allocation outside of mutex_lock() so unlock is not needed when
allocation fails.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
All cases in switch-case have a same goto on error, move the return
check out of the switch. This is a cleanup.
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
max_brightness is used in ideapad_kbd_bl_brightness_get() before it's set,
causing ideapad_kbd_bl_brightness_get() to return -EINVAL sometimes.
Fixes: ecaa1867b524 ("platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol")
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231114114055.6220-2-stuart.a.hayhurst@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Maurice is no longer with Intel and his e-mail address is no longer
active. Remove the stale entry from Slim boot loader section.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20231102195218.143440-1-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Cited commit removed the strscpy() call and kept the snprintf() only.
It is common to use 'dev->name' as the format string before a netdev is
registered, this results in 'res' and 'name' pointers being equal.
According to POSIX, if copying takes place between objects that overlap
as a result of a call to sprintf() or snprintf(), the results are
undefined.
Add back the strscpy() and use 'buf' as an intermediate buffer.
Fixes: 7ad17b04dc7b ("net: trust the bitmap in __dev_alloc_name()")
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The usage count of struct dev_pm_info is an implementation detail that
is only available if CONFIG_PM is enabled, so printing it in a debug message
causes a build failure in configurations without PM:
In file included from include/linux/device.h:15,
from include/linux/pci.h:37,
from drivers/accel/ivpu/ivpu_pm.c:8:
drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active':
drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count'
254 | atomic_read(&vdev->drm.dev->power.usage_count));
| ^
include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk'
129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~
drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg'
75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \
| ^~~~~~~
drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg'
253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n",
| ^~~~~~~~
The print message does not seem essential, so the easiest workaround is
to just remove it.
Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org
(cherry picked from commit 1470acbef122c7e2e588f6346ce459c26d0568a2)
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
|
|
When moving the *-internal-delay-ps properties to only apply for RGMII
interface modes there where a typo in the text formatting.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 3780bb29311eccb7a1c9641032a112eed237f7e3.
The cited commit introduced unwanted behavior.
The intent for the commit was to be able to detect carrier loss/gain
for just the NIC connected to the BMC. The unwanted effect is a
carrier loss for auxiliary paths also causes the BMC to lose
carrier. The BMC never regains carrier despite the secondary NIC
regaining a link.
This change, when merged, needs to be backported to stable kernels.
5.4-stable, 5.10-stable, 5.15-stable, 6.1-stable, 6.5-stable
Fixes: 3780bb29311e ("ncsi: Propagate carrier gain/loss events to the NCSI controller")
CC: stable@vger.kernel.org
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of the IRQ number user the struct irq_info pointer as parameter
in the internal pirq related functions. This allows to drop some calls
of info_for_irq().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Modify the internal bind- and unbind-interfaces to take a struct
irq_info parameter. When allocating a new IRQ pass the pointer from
the allocating function further up.
This will reduce the number of info_for_irq() calls and make the code
more efficient.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Instead of having a common function for allocating a single IRQ or a
consecutive number of IRQs, split up the functionality into the callers
of xen_allocate_irqs_dynamic().
This allows to handle any allocation error in xen_irq_init() gracefully
instead of panicing the system. Let xen_irq_init() return the irq_info
pointer or NULL in case of an allocation error.
Additionally set the IRQ into irq_info already at allocation time, as
otherwise the IRQ would be '0' (which is a valid IRQ number) until
being set.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- stackleak: add declarations for global functions (Arnd Bergmann)
- gcc-plugins: randstruct: Only warn about true flexible arrays (Kees
Cook)
- gcc-plugins: latent_entropy: Fix description typo (Konstantin Runov)
* tag 'hardening-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: latent_entropy: Fix typo (args -> argc) in plugin description
gcc-plugins: randstruct: Only warn about true flexible arrays
stackleak: add declarations for global functions
|
|
In percpu reader mode, trylock() for read had a lost wakeup: on failure
to get the lock, we may have caused a writer to fail to get the lock,
because we temporarily elevated the reader count.
We need to check for waiters after decrementing the read count - not
before.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In no_data_io mode, we expect data checksums to be wrong - don't want to
spew the log with them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When searching the link table for the matching inode, we were searching
for a specific - incorrect - snapshot ID as well, causing us to fail to
find the inode.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Running with fewer max btree paths doesn't work anymore when replication
is enabled - as we've added e.g. the freespace and bucket gens btrees,
we naturally end up needing more btree paths.
This is an issue with lockdep, we end up taking more locks than lockdep
will track (the MAX_LOCKD_DEPTH constant). But bcachefs as merged does
not yet support lockdep anyways, so we can leave that for later.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The journal read path had some informational log statements preperatory
for ZNS support - they're not of interest to users, so we can turn them
off.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In may_delete_deleted_inode(), there's a corner case when a snapshot was
taken while we had an unlinked inode: we don't want to delete the inode
in the internal (shared) snapshot node, since it might have been
reattached in a descendent snapshot.
Instead we propagate the key to any snapshot leaves it doesn't exist in,
so that it can be deleted there if necessary, and then clear the
unlinked flag in the internal node.
But we forgot to commit after clearing the unlinked flag, causing us to
go into an infinite loop.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a bug discovered by generic/388 where sb->s_fs_info was NULL
while the superblock was still active - the error path was entirely
fubar, and was trying to do something unclear and unecessary.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
During mount, bcachefs mount option processing may sleep while allocating a string buffer.
Fix this by reference counting in order to take the atomic path.
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
may_delete_deleted_inode() was returning without exiting a btree
iterator, eventually causing propagate_key_to_snaphot_leaves() to go
into an infinite loop hitting btree_trans_too_many_iters().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This deletes the complicated and somewhat expensive journal
pre-reservation machinery in favor of just using journal watermarks:
when the journal is more than half full, we run journal reclaim more
aggressively, and when the journal is more than 3/4s full we only allow
journal reclaim to get new journal reservations.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Pull Zstd fix from Nick Terrell:
"Only a single line change to fix a benign UBSAN warning"
* tag 'zstd-linus-v6.7-rc2' of https://github.com/terrelln/linux:
zstd: Fix array-index-out-of-bounds UBSAN warning
|
|
Matthieu Baerts says:
====================
mptcp: misc. fixes for v6.7
Here are a few fixes related to MPTCP:
- Patch 1 limits GSO max size to ~64K when MPTCP is being used due to a
spec limit. 'gso_max_size' can exceed the max value supported by MPTCP
since v5.19.
- Patch 2 fixes a possible NULL pointer dereference on close that can
happen since v6.7-rc1.
- Patch 3 avoids sending a RM_ADDR when the corresponding address is no
longer tracked locally. A regression for a fix backported to v5.19.
- Patch 4 adds a missing lock when changing the IP TOS with setsockopt().
A fix for v5.17.
- Patch 5 fixes an expectation when running MPTCP Join selftest with the
checksum option (-C). An issue present since v6.1.
====================
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-0-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Running the mp_join selftest manually with the following command line:
./mptcp_join.sh -z -C
leads to some failures:
002 fastclose server test
# ...
rtx [fail] got 1 MP_RST[s] TX expected 0
# ...
rstrx [fail] got 1 MP_RST[s] RX expected 0
The problem is really in the wrong expectations for the RST checks
implied by the csum validation. Note that the same check is repeated
explicitly in the same test-case, with the correct expectation and
pass successfully.
Address the issue explicitly setting the correct expectation for
the failing checks.
Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-5-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MPTCP implementation of the IP_TOS socket option uses the lockless
variant of the TOS manipulation helper and does not hold such lock at
the helper invocation time.
Add the required locking.
Fixes: ffcacff87cd6 ("mptcp: Support for IP_TOS for MPTCP setsockopt()")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/457
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-4-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch adds the validity check for sending RM_ADDRs for userspace PM
in mptcp_pm_remove_addrs(), only send a RM_ADDR when the address is in the
anno_list or conn_list.
Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-3-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the blamed commit below, the MPTCP release callback can
dereference the first subflow pointer via __mptcp_set_connected()
and send buffer auto-tuning. Such pointer is always expected to be
valid, except at socket destruction time, when the first subflow is
deleted and the pointer zeroed.
If the connect event is handled by the release callback while the
msk socket is finally released, MPTCP hits the following splat:
general protection fault, probably for non-canonical address 0xdffffc00000000f2: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000790-0x0000000000000797]
CPU: 1 PID: 26719 Comm: syz-executor.2 Not tainted 6.6.0-syzkaller-10102-gff269e2cd5ad #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
RIP: 0010:mptcp_subflow_ctx net/mptcp/protocol.h:542 [inline]
RIP: 0010:__mptcp_propagate_sndbuf net/mptcp/protocol.h:813 [inline]
RIP: 0010:__mptcp_set_connected+0x57/0x3e0 net/mptcp/subflow.c:424
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8a62323c
RDX: 00000000000000f2 RSI: ffffffff8a630116 RDI: 0000000000000790
RBP: ffff88803334b100 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000034 R12: ffff88803334b198
R13: ffff888054f0b018 R14: 0000000000000000 R15: ffff88803334b100
FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbcb4f75198 CR3: 000000006afb5000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
mptcp_release_cb+0xa2c/0xc40 net/mptcp/protocol.c:3405
release_sock+0xba/0x1f0 net/core/sock.c:3537
mptcp_close+0x32/0xf0 net/mptcp/protocol.c:3084
inet_release+0x132/0x270 net/ipv4/af_inet.c:433
inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:485
__sock_release+0xae/0x260 net/socket.c:659
sock_close+0x1c/0x20 net/socket.c:1419
__fput+0x270/0xbb0 fs/file_table.c:394
task_work_run+0x14d/0x240 kernel/task_work.c:180
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xa92/0x2a20 kernel/exit.c:876
do_group_exit+0xd4/0x2a0 kernel/exit.c:1026
get_signal+0x23ba/0x2790 kernel/signal.c:2900
arch_do_signal_or_restart+0x90/0x7f0 arch/x86/kernel/signal.c:309
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x11f/0x240 kernel/entry/common.c:204
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x60 kernel/entry/common.c:296
do_syscall_64+0x4b/0x110 arch/x86/entry/common.c:88
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fb515e7cae9
Code: Unable to access opcode bytes at 0x7fb515e7cabf.
RSP: 002b:00007fb516c560c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: 000000000000003c RBX: 00007fb515f9c120 RCX: 00007fb515e7cae9
RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000006
RBP: 00007fb515ec847a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000006e R14: 00007fb515f9c120 R15: 00007ffc631eb968
</TASK>
To avoid sparkling unneeded conditionals, address the issue explicitly
checking msk->first only in the critical place.
Fixes: 8005184fd1ca ("mptcp: refactor sndbuf auto-tuning")
Cc: stable@vger.kernel.org
Reported-by: <syzbot+9dfbaedb6e6baca57a32@syzkaller.appspotmail.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/454
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/netdev/CANn89iLZUA6S2a=K8GObnS62KK6Jt4B7PsAs7meMFooM8xaTgw@mail.gmail.com/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-2-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the blamed commit below, the TCP sockets (and the MPTCP subflows)
can build egress packets larger than 64K. That exceeds the maximum DSS
data size, the length being misrepresent on the wire and the stream being
corrupted, as later observed on the receiver:
WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0
CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'.
RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705
RSP: 0018:ffffc90000006e80 EFLAGS: 00010246
RAX: ffffffff83e9f674 RBX: ffff88802f45d870 RCX: ffff888102ad0000
netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'.
RDX: 0000000080000303 RSI: 0000000000013908 RDI: 0000000000003908
RBP: ffffc90000007110 R08: ffffffff83e9e078 R09: 1ffff1100e548c8a
R10: dffffc0000000000 R11: ffffed100e548c8b R12: 0000000000013908
R13: dffffc0000000000 R14: 0000000000003908 R15: 000000000031cf29
FS: 00007f239c47e700(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f239c45cd78 CR3: 000000006a66c006 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
PKRU: 55555554
Call Trace:
<IRQ>
mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819
subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409
tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151
tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098
tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483
tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749
ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438
ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483
ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304
__netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532
process_backlog+0x353/0x660 net/core/dev.c:5974
__napi_poll+0xc6/0x5a0 net/core/dev.c:6536
net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603
__do_softirq+0x184/0x524 kernel/softirq.c:553
do_softirq+0xdd/0x130 kernel/softirq.c:454
Address the issue explicitly bounding the maximum GSO size to what MPTCP
actually allows.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/450
Fixes: 7c4e983c4f3c ("net: allow gso_max_size to exceed 65536")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-1-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netpoll will explicilty pass the polling call with a budget of 0 to
indicate it's clearing the Tx path only. For the gve_rx_poll and
gve_xdp_poll, they were mistakenly taking the 0 budget as the indication
to do all the work. Add check to avoid the rx path and xdp path being
called when budget is 0. And also avoid napi_complete_done being called
when budget is 0 for netpoll.
Fixes: f5cedc84a30d ("gve: Add transmit and receive support")
Signed-off-by: Ziwei Xiao <ziweixiao@google.com>
Link: https://lore.kernel.org/r/20231114004144.2022268-1-ziweixiao@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-11-13 (ice)
This series contains updates to ice driver only.
Arkadiusz ensures the device is initialized with valid lock status
value. He also removes range checking of dpll priority to allow firmware
to process the request; supported values are firmware dependent.
Finally, he removes setting of can change capability for pins that
cannot be changed.
Dan restores ability to load a package which doesn't contain a signature
segment.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix DDP package download for packages without signature segment
ice: dpll: fix output pin capabilities
ice: dpll: fix check for dpll input priority range
ice: dpll: fix initial lock status of dpll
====================
Link: https://lore.kernel.org/r/20231113230551.548489-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Shannon Nelson says:
====================
pds_core: fix irq index bug and compiler warnings
The first patch fixes a bug in our interrupt masking where we used the
wrong index. The second patch addresses a couple of kernel test robot
string truncation warnings.
====================
Link: https://lore.kernel.org/r/20231113183257.71110-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Our friendly kernel test robot pointed out a couple of potential
string truncation issues. None of which were we worried about,
but can be relatively easily fixed to quiet the complaints.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310211736.66syyDpp-lkp@intel.com/
Fixes: 45d76f492938 ("pds_core: set up device and adminq")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231113183257.71110-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the qcq's interrupt index, not the irq number, to mask
the interrupt. Since the irq number can be out of range from
the number of possible interrupts, we can end up accessing
and potentially scribbling on out-of-range and/or unmapped
memory, making the kernel angry.
[ 3116.039364] BUG: unable to handle page fault for address: ffffbeea1c3edf84
[ 3116.047059] #PF: supervisor write access in kernel mode
[ 3116.052895] #PF: error_code(0x0002) - not-present page
[ 3116.058636] PGD 100000067 P4D 100000067 PUD 1001f2067 PMD 10f82e067 PTE 0
[ 3116.066221] Oops: 0002 [#1] SMP NOPTI
[ 3116.092948] RIP: 0010:iowrite32+0x9/0x76
[ 3116.190452] Call Trace:
[ 3116.193185] <IRQ>
[ 3116.195430] ? show_trace_log_lvl+0x1d6/0x2f9
[ 3116.200298] ? show_trace_log_lvl+0x1d6/0x2f9
[ 3116.205166] ? pdsc_adminq_isr+0x43/0x55 [pds_core]
[ 3116.210618] ? __die_body.cold+0x8/0xa
[ 3116.214806] ? page_fault_oops+0x16d/0x1ac
[ 3116.219382] ? exc_page_fault+0xbe/0x13b
[ 3116.223764] ? asm_exc_page_fault+0x22/0x27
[ 3116.228440] ? iowrite32+0x9/0x76
[ 3116.232143] pdsc_adminq_isr+0x43/0x55 [pds_core]
[ 3116.237627] __handle_irq_event_percpu+0x3a/0x184
[ 3116.243088] handle_irq_event+0x57/0xb0
[ 3116.247575] handle_edge_irq+0x87/0x225
[ 3116.252062] __common_interrupt+0x3e/0xbc
[ 3116.256740] common_interrupt+0x7b/0x98
[ 3116.261216] </IRQ>
[ 3116.263745] <TASK>
[ 3116.266268] asm_common_interrupt+0x22/0x27
Reported-by: Joao Martins <joao.m.martins@oracle.com>
Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20231113183257.71110-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tg3_tso_bug() drops a packet if it cannot be segmented for any reason.
The number of discarded frames should be incremented accordingly.
Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20231113182350.37472-2-alexey.pakhunov@spacex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change moves [rt]x_dropped counters to tg3_napi so that they can be
updated by a single writer, race-free.
Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231113182350.37472-1-alexey.pakhunov@spacex.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dma_rx_size can be set as low as 64. Rx budget might be higher than
that. Make sure to not overrun allocated rx buffers when budget is
larger.
Leave one descriptor unused to avoid wrap around of 'dirty_rx' vs
'cur_rx'.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Link: https://lore.kernel.org/r/d95413e44c97d4692e72cec13a75f894abeb6998.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The while loop condition verifies 'count < limit'. Neither value change
before the 'count >= limit' check. As is this check is dead code. But
code inspection reveals a code path that modifies 'count' and then goto
'drain_data' and back to 'read_again'. So there is a need to verify
count value sanity after 'read_again'.
Move 'read_again' up to fix the count limit check.
Fixes: ec222003bd94 ("net: stmmac: Prepare to add Split Header support")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/d9486296c3b6b12ab3a0515fcd47d56447a07bfc.1699897370.git.baruch@tkos.co.il
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Audit of the refcounting turned up that perf_pmu_migrate_context()
fails to migrate the ctx refcount.
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20230612093539.085862001@infradead.org
Cc: <stable@vger.kernel.org>
|
|
Xi reported that commit 5694289ce183 ("futex: Flag conversion") broke
glibc's robust futex tests.
This was narrowed down to the change of FLAGS_SHARED from 0x01 to
0x10, at which point Florian noted that handle_futex_death() has a
hardcoded flags argument of 1.
Change this to: FLAGS_SIZE_32 | FLAGS_SHARED, matching how
futex_to_flags() unconditionally sets FLAGS_SIZE_32 for all legacy
futex ops.
Reported-by: Xi Ruoyao <xry111@xry111.site>
Reported-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20231114201402.GA25315@noisy.programming.kicks-ass.net
Fixes: 5694289ce183 ("futex: Flag conversion")
Cc: <stable@vger.kernel.org>
|
|
Zstd used an array of length 1 to mean a flexible array for C89
compatibility. Switch to a C99 flexible array to fix the UBSAN warning.
Tested locally by booting the kernel and writing to and reading from a
BtrFS filesystem with zstd compression enabled. I was unable to reproduce
the issue before the fix, however it is a trivial change.
Link: https://lkml.kernel.org/r/20231012213428.1390905-1-nickrterrell@gmail.com
Reported-by: syzbot+1f2eb3e8cd123ffce499@syzkaller.appspotmail.com
Reported-by: Eric Biggers <ebiggers@kernel.org>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
|
|
eBPF can end up calling into the audit code from some odd places, and
some of these places don't have @current set properly so we end up
tripping the `WARN_ON_ONCE(!current->mm)` near the top of
`audit_exe_compare()`. While the basic `!current->mm` check is good,
the `WARN_ON_ONCE()` results in some scary console messages so let's
drop that and just do the regular `!current->mm` check to avoid
problems.
Cc: <stable@vger.kernel.org>
Fixes: 47846d51348d ("audit: don't take task_lock() in audit_exe_compare() code path")
Reported-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
This allows it to break the following circular locking dependency.
Aug 10 07:01:29 dg1test kernel: ======================================================
Aug 10 07:01:29 dg1test kernel: WARNING: possible circular locking dependency detected
Aug 10 07:01:29 dg1test kernel: 6.4.0-rc7+ #10 Not tainted
Aug 10 07:01:29 dg1test kernel: ------------------------------------------------------
Aug 10 07:01:29 dg1test kernel: wireplumber/2236 is trying to acquire lock:
Aug 10 07:01:29 dg1test kernel: ffff8fca5320da18 (&fctx->lock){-...}-{2:2}, at: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel:
but task is already holding lock:
Aug 10 07:01:29 dg1test kernel: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:
which lock already depends on the new lock.
Aug 10 07:01:29 dg1test kernel:
the existing dependency chain (in reverse order) is:
Aug 10 07:01:29 dg1test kernel:
-> #3 (&event->list_lock#2){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel:
-> #2 (&device->intr.lock){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel: nvkm_inth_allow+0x2c/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x181/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100
Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0
Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau]
Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau]
Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm]
Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm]
Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm]
Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0
Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90
Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc
Aug 10 07:01:29 dg1test kernel:
-> #1 (&event->refs_lock#4){....}-{2:2}:
Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_state+0x37/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy_allow+0x63/0xd0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_uevent_mthd+0x4d/0x70 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_ioctl+0x10b/0x250 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvif_object_mthd+0xa8/0x1f0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvif_event_allow+0x2a/0xa0 [nouveau]
Aug 10 07:01:29 dg1test kernel: nouveau_fence_enable_signaling+0x78/0x80 [nouveau]
Aug 10 07:01:29 dg1test kernel: __dma_fence_enable_signaling+0x5e/0x100
Aug 10 07:01:29 dg1test kernel: dma_fence_add_callback+0x4b/0xd0
Aug 10 07:01:29 dg1test kernel: nouveau_cli_work_queue+0xae/0x110 [nouveau]
Aug 10 07:01:29 dg1test kernel: nouveau_gem_object_close+0x1d1/0x2a0 [nouveau]
Aug 10 07:01:29 dg1test kernel: drm_gem_handle_delete+0x70/0xe0 [drm]
Aug 10 07:01:29 dg1test kernel: drm_ioctl_kernel+0xa5/0x150 [drm]
Aug 10 07:01:29 dg1test kernel: drm_ioctl+0x256/0x490 [drm]
Aug 10 07:01:29 dg1test kernel: nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
Aug 10 07:01:29 dg1test kernel: __x64_sys_ioctl+0x91/0xd0
Aug 10 07:01:29 dg1test kernel: do_syscall_64+0x3c/0x90
Aug 10 07:01:29 dg1test kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc
Aug 10 07:01:29 dg1test kernel:
-> #0 (&fctx->lock){-...}-{2:2}:
Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240
Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel:
other info that might help us debug this:
Aug 10 07:01:29 dg1test kernel: Chain exists of:
&fctx->lock --> &device->intr.lock --> &event->list_lock#2
Aug 10 07:01:29 dg1test kernel: Possible unsafe locking scenario:
Aug 10 07:01:29 dg1test kernel: CPU0 CPU1
Aug 10 07:01:29 dg1test kernel: ---- ----
Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2);
Aug 10 07:01:29 dg1test kernel: lock(&device->intr.lock);
Aug 10 07:01:29 dg1test kernel: lock(&event->list_lock#2);
Aug 10 07:01:29 dg1test kernel: lock(&fctx->lock);
Aug 10 07:01:29 dg1test kernel:
*** DEADLOCK ***
Aug 10 07:01:29 dg1test kernel: 2 locks held by wireplumber/2236:
Aug 10 07:01:29 dg1test kernel: #0: ffff8fca53177bf8 (&device->intr.lock){-...}-{2:2}, at: nvkm_intr+0x29/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel: #1: ffff8fca41208610 (&event->list_lock#2){-...}-{2:2}, at: nvkm_event_ntfy+0x50/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel:
stack backtrace:
Aug 10 07:01:29 dg1test kernel: CPU: 6 PID: 2236 Comm: wireplumber Not tainted 6.4.0-rc7+ #10
Aug 10 07:01:29 dg1test kernel: Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021
Aug 10 07:01:29 dg1test kernel: Call Trace:
Aug 10 07:01:29 dg1test kernel: <TASK>
Aug 10 07:01:29 dg1test kernel: dump_stack_lvl+0x5b/0x90
Aug 10 07:01:29 dg1test kernel: check_noncircular+0xe2/0x110
Aug 10 07:01:29 dg1test kernel: __lock_acquire+0x14e3/0x2240
Aug 10 07:01:29 dg1test kernel: lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel: ? lock_acquire+0xc8/0x2a0
Aug 10 07:01:29 dg1test kernel: _raw_spin_lock_irqsave+0x4b/0x70
Aug 10 07:01:29 dg1test kernel: ? nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel: nouveau_fence_wait_uevent_handler+0x2b/0x100 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_client_event+0xf/0x20 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_event_ntfy+0x9b/0xf0 [nouveau]
Aug 10 07:01:29 dg1test kernel: ga100_fifo_nonstall_intr+0x24/0x30 [nouveau]
Aug 10 07:01:29 dg1test kernel: nvkm_intr+0x12c/0x240 [nouveau]
Aug 10 07:01:29 dg1test kernel: __handle_irq_event_percpu+0x88/0x240
Aug 10 07:01:29 dg1test kernel: handle_irq_event+0x38/0x80
Aug 10 07:01:29 dg1test kernel: handle_edge_irq+0xa3/0x240
Aug 10 07:01:29 dg1test kernel: __common_interrupt+0x72/0x160
Aug 10 07:01:29 dg1test kernel: common_interrupt+0x60/0xe0
Aug 10 07:01:29 dg1test kernel: asm_common_interrupt+0x26/0x40
Aug 10 07:01:29 dg1test kernel: RIP: 0033:0x7fb66174d700
Aug 10 07:01:29 dg1test kernel: Code: c1 e2 05 29 ca 8d 0c 10 0f be 07 84 c0 75 eb 89 c8 c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa e9 d7 0f fc ff 0f 1f 80 00 00 00 00 <f3> 0f 1e fa e9 c7 0f fc>
Aug 10 07:01:29 dg1test kernel: RSP: 002b:00007ffdd3c48438 EFLAGS: 00000206
Aug 10 07:01:29 dg1test kernel: RAX: 000055bb758763c0 RBX: 000055bb758752c0 RCX: 00000000000028b0
Aug 10 07:01:29 dg1test kernel: RDX: 000055bb758752c0 RSI: 000055bb75887490 RDI: 000055bb75862950
Aug 10 07:01:29 dg1test kernel: RBP: 00007ffdd3c48490 R08: 000055bb75873b10 R09: 0000000000000001
Aug 10 07:01:29 dg1test kernel: R10: 0000000000000004 R11: 000055bb7587f000 R12: 000055bb75887490
Aug 10 07:01:29 dg1test kernel: R13: 000055bb757f6280 R14: 000055bb758875c0 R15: 000055bb757f6280
Aug 10 07:01:29 dg1test kernel: </TASK>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231107053255.2257079-1-airlied@gmail.com
|
|
The r535_gsp_cmdq_get() function returns error pointers but this code
checks for NULL. Also we need to propagate the error pointer back to
the callers in r535_gsp_rpc_get(). Returning NULL will lead to a NULL
pointer dereference.
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f71996d9-d1cb-45ea-a4b2-2dfc21312d8c@kili.mountain
|
|
The if we hit the "continue" statement on the first iteration through
the loop then "handle_mux" needs to be set to NULL so we continue
looping.
Fixes: 176fdcbddfd2 ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1d864f6e-43e9-43d8-9d90-30e76c9c843b@moroto.mountain
|
|
should_we_balance is called for the decision to do load-balancing.
When sched ticks invoke this function, only one CPU should return
true. However, in the current code, two CPUs can return true. The
following situation, where b means busy and i means idle, is an
example, because CPU 0 and CPU 2 return true.
[0, 1] [2, 3]
b b i b
This fix checks if there exists an idle CPU with busy sibling(s)
after looking for a CPU on an idle core. If some idle CPUs with busy
siblings are found, just the first one should do load-balancing.
Fixes: b1bfeab9b002 ("sched/fair: Consider the idle state of the whole core for load balance")
Signed-off-by: Keisuke Nishimura <keisuke.nishimura@inria.fr>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.vnet.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20231031133821.1570861-1-keisuke.nishimura@inria.fr
|
|
519fabc7aaba ("psi: remove 500ms min window size limitation for
triggers") breaks unprivileged psi polling on cgroups.
Historically, we had a privilege check for polling in the open() of a
pressure file in /proc, but were erroneously missing it for the open()
of cgroup pressure files.
When unprivileged polling was introduced in d82caa273565 ("sched/psi:
Allow unprivileged polling of N*2s period"), it needed to filter
privileges depending on the exact polling parameters, and as such
moved the CAP_SYS_RESOURCE check from the proc open() callback to
psi_trigger_create(). Both the proc files as well as cgroup files go
through this during write(). This implicitly added the missing check
for privileges required for HT polling for cgroups.
When 519fabc7aaba ("psi: remove 500ms min window size limitation for
triggers") followed right after to remove further restrictions on the
RT polling window, it incorrectly assumed the cgroup privilege check
was still missing and added it to the cgroup open(), mirroring what we
used to do for proc files in the past.
As a result, unprivileged poll requests that would be supported now
get rejected when opening the cgroup pressure file for writing.
Remove the cgroup open() check. psi_trigger_create() handles it.
Fixes: 519fabc7aaba ("psi: remove 500ms min window size limitation for triggers")
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: stable@vger.kernel.org # 6.5+
Link: https://lore.kernel.org/r/20231026164114.2488682-1-hannes@cmpxchg.org
|
|
vruntime of the (on_rq && !0-lag) entity needs to be adjusted when
it gets re-weighted, and the calculations can be simplified based
on the fact that re-weight won't change the w-average of all the
entities. Please check the proofs in comments.
But adjusting vruntime can also cause position change in RB-tree
hence require re-queue to fix up which might be costly. This might
be avoided by deferring adjustment to the time the entity actually
leaves tree (dequeue/pick), but that will negatively affect task
selection and probably not good enough either.
Fixes: 147f3efaa241 ("sched/fair: Implement an EEVDF-like scheduling policy")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231107090510.71322-2-wuyun.abel@bytedance.com
|
|
The code to handle the case of server disabling multichannel
was picking iface_lock with chan_lock held. This goes against
the lock ordering rules, as iface_lock is a higher order lock
(even if it isn't so obvious).
This change fixes the lock ordering by doing the following in
that order for each secondary channel:
1. store iface and server pointers in local variable
2. remove references to iface and server in channels
3. unlock chan_lock
4. lock iface_lock
5. dec ref count for iface
6. unlock iface_lock
7. dec ref count for server
8. lock chan_lock again
Since this function can only be called in smb2_reconnect, and
that cannot be called by two parallel processes, we should not
have races due to dropping chan_lock between steps 3 and 8.
Fixes: ee1d21794e55 ("cifs: handle when server stops supporting multichannel")
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
My last change in this area introduced a change which
accounted for primary channel in the interface ref count.
However, it did not reduce this ref count on deallocation
of the primary channel. i.e. during umount.
Fixing this leak here, by dropping this ref count for
primary channel while freeing up the session.
Fixes: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Cc: stable@vger.kernel.org
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fix the typo in the plugin description comment. Clearly, "argc" should
be used.
Signed-off-by: Konstantin Runov <runebone1@gmail.com>
Link: https://lore.kernel.org/r/20231030094508.245432-1-runebone1@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
I am retiring from Red Hat and will no longer be a maintainer of the
gfs2 file system.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
HP 255 G10 has a mute LED that can be made to work using quirk
ALC236_FIXUP_HP_MUTE_LED_COEFBIT2.
Enable already existing quirk - at correct line to keep order
Signed-off-by: Matus Malych <matus@malych.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231114133524.11340-1-matus@malych.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull in queued fixes for 6.7
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
list_for_each_entry_safe() does not work for the async case which runs
under RCU, therefore, split GC logic for catchall in two functions
instead, one for each of the sync and async GC variants.
The catchall sync GC variant never sees a _DEAD bit set on ever, thus,
this handling is removed in such case, moreover, allocate GC sync batch
via GFP_KERNEL.
Fixes: 93995bf4af2c ("netfilter: nf_tables: remove catchall element in GC sync path")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
add/del/test
Linkui Xiao reported that there's a race condition when ipset swap and destroy is
called, which can lead to crash in add/del/test element operations. Swap then
destroy are usual operations to replace a set with another one in a production
system. The issue can in some cases be reproduced with the script:
ipset create hash_ip1 hash:net family inet hashsize 1024 maxelem 1048576
ipset add hash_ip1 172.20.0.0/16
ipset add hash_ip1 192.168.0.0/16
iptables -A INPUT -m set --match-set hash_ip1 src -j ACCEPT
while [ 1 ]
do
# ... Ongoing traffic...
ipset create hash_ip2 hash:net family inet hashsize 1024 maxelem 1048576
ipset add hash_ip2 172.20.0.0/16
ipset swap hash_ip1 hash_ip2
ipset destroy hash_ip2
sleep 0.05
done
In the race case the possible order of the operations are
CPU0 CPU1
ip_set_test
ipset swap hash_ip1 hash_ip2
ipset destroy hash_ip2
hash_net_kadt
Swap replaces hash_ip1 with hash_ip2 and then destroy removes hash_ip2 which
is the original hash_ip1. ip_set_test was called on hash_ip1 and because destroy
removed it, hash_net_kadt crashes.
The fix is to force ip_set_swap() to wait for all readers to finish accessing the
old set pointers by calling synchronize_rcu().
The first version of the patch was written by Linkui Xiao <xiaolinkui@kylinos.cn>.
v2: synchronize_rcu() is moved into ip_set_swap() in order not to burden
ip_set_destroy() unnecessarily when all sets are destroyed.
v3: Florian Westphal pointed out that all netfilter hooks run with rcu_read_lock() held
and em_ipset.c wraps the entire ip_set_test() in rcu read lock/unlock pair.
So there's no need to extend the rcu read locked area in ipset itself.
Closes: https://lore.kernel.org/all/69e7963b-e7f8-3ad0-210-7b86eebf7f78@netfilter.org/
Reported by: Linkui Xiao <xiaolinkui@kylinos.cn>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
destroy element command bogusly reports ENOENT in case a set element
does not exist. ENOENT errors are skipped, however, err is still set
and propagated to userspace.
# nft destroy element ip raw BLACKLIST { 1.2.3.4 }
Error: Could not process rule: No such file or directory
destroy element ip raw BLACKLIST { 1.2.3.4 }
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Fixes: f80a612dd77c ("netfilter: nf_tables: add support to destroy operation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The problem is in nft_byteorder_eval() where we are iterating through a
loop and writing to dst[0], dst[1], dst[2] and so on... On each
iteration we are writing 8 bytes. But dst[] is an array of u32 so each
element only has space for 4 bytes. That means that every iteration
overwrites part of the previous element.
I spotted this bug while reviewing commit caf3ef7468f7 ("netfilter:
nf_tables: prevent OOB access in nft_byteorder_eval") which is a related
issue. I think that the reason we have not detected this bug in testing
is that most of time we only write one element.
Fixes: ce1e7989d989 ("netfilter: nft_byteorder: provide 64bit le/be conversion")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
K2CI reported a problem:
consume_skb(skb);
return err;
[nf_br_ip_fragment() error] uninitialized symbol 'err'.
err is not initialized, because returning 0 is expected, initialize err
to 0.
Fixes: 3c171f496ef5 ("netfilter: bridge: add connection tracking system")
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Linkui Xiao <xiaolinkui@kylinos.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The code that uses nft_net has been removed, and the nft_pernet function
is merely obtaining a reference to shared data through the net pointer.
The content of the net pointer is not modified or changed, so both of
them should be removed.
silence the warning:
net/netfilter/nft_set_rbtree.c:627:26: warning: variable ‘nft_net’ set but not used
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7103
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
syzbot reported the following crash [1]
After releasing unix socket lock, u->oob_skb can be changed
by another thread. We must temporarily increase skb refcount
to make sure this other thread will not free the skb under us.
[1]
BUG: KASAN: slab-use-after-free in unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866
Read of size 4 at addr ffff88801f3b9cc4 by task syz-executor107/5297
CPU: 1 PID: 5297 Comm: syz-executor107 Not tainted 6.6.0-syzkaller-15910-gb8e3a87a627b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
unix_stream_read_actor+0xa7/0xc0 net/unix/af_unix.c:2866
unix_stream_recv_urg net/unix/af_unix.c:2587 [inline]
unix_stream_read_generic+0x19a5/0x2480 net/unix/af_unix.c:2666
unix_stream_recvmsg+0x189/0x1b0 net/unix/af_unix.c:2903
sock_recvmsg_nosec net/socket.c:1044 [inline]
sock_recvmsg+0xe2/0x170 net/socket.c:1066
____sys_recvmsg+0x21f/0x5c0 net/socket.c:2803
___sys_recvmsg+0x115/0x1a0 net/socket.c:2845
__sys_recvmsg+0x114/0x1e0 net/socket.c:2875
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fc67492c559
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6748ab228 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 000000000000001c RCX: 00007fc67492c559
RDX: 0000000040010083 RSI: 0000000020000140 RDI: 0000000000000004
RBP: 00007fc6749b6348 R08: 00007fc6748ab6c0 R09: 00007fc6748ab6c0
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc6749b6340
R13: 00007fc6749b634c R14: 00007ffe9fac52a0 R15: 00007ffe9fac5388
</TASK>
Allocated by task 5295:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x81/0x90 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x180/0x3c0 mm/slub.c:3523
__alloc_skb+0x287/0x330 net/core/skbuff.c:641
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
sock_alloc_send_skb include/net/sock.h:1884 [inline]
queue_oob net/unix/af_unix.c:2147 [inline]
unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Freed by task 5295:
kasan_save_stack+0x33/0x50 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
____kasan_slab_free+0x15b/0x1b0 mm/kasan/common.c:200
kasan_slab_free include/linux/kasan.h:164 [inline]
slab_free_hook mm/slub.c:1800 [inline]
slab_free_freelist_hook+0x114/0x1e0 mm/slub.c:1826
slab_free mm/slub.c:3809 [inline]
kmem_cache_free+0xf8/0x340 mm/slub.c:3831
kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:1015
__kfree_skb net/core/skbuff.c:1073 [inline]
consume_skb net/core/skbuff.c:1288 [inline]
consume_skb+0xdf/0x170 net/core/skbuff.c:1282
queue_oob net/unix/af_unix.c:2178 [inline]
unix_stream_sendmsg+0xd49/0x10a0 net/unix/af_unix.c:2301
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
The buggy address belongs to the object at ffff88801f3b9c80
which belongs to the cache skbuff_head_cache of size 240
The buggy address is located 68 bytes inside of
freed 240-byte region [ffff88801f3b9c80, ffff88801f3b9d70)
The buggy address belongs to the physical page:
page:ffffea00007cee40 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1f3b9
flags: 0xfff00000000800(slab|node=0|zone=1|lastcpupid=0x7ff)
page_type: 0xffffffff()
raw: 00fff00000000800 ffff888142a60640 dead000000000122 0000000000000000
raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5299, tgid 5283 (syz-executor107), ts 103803840339, free_ts 103600093431
set_page_owner include/linux/page_owner.h:31 [inline]
post_alloc_hook+0x2cf/0x340 mm/page_alloc.c:1537
prep_new_page mm/page_alloc.c:1544 [inline]
get_page_from_freelist+0xa25/0x36c0 mm/page_alloc.c:3312
__alloc_pages+0x1d0/0x4a0 mm/page_alloc.c:4568
alloc_pages_mpol+0x258/0x5f0 mm/mempolicy.c:2133
alloc_slab_page mm/slub.c:1870 [inline]
allocate_slab+0x251/0x380 mm/slub.c:2017
new_slab mm/slub.c:2070 [inline]
___slab_alloc+0x8c7/0x1580 mm/slub.c:3223
__slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3322
__slab_alloc_node mm/slub.c:3375 [inline]
slab_alloc_node mm/slub.c:3468 [inline]
kmem_cache_alloc_node+0x132/0x3c0 mm/slub.c:3523
__alloc_skb+0x287/0x330 net/core/skbuff.c:641
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xe4/0x710 net/core/skbuff.c:6331
sock_alloc_send_pskb+0x7e4/0x970 net/core/sock.c:2780
sock_alloc_send_skb include/net/sock.h:1884 [inline]
queue_oob net/unix/af_unix.c:2147 [inline]
unix_stream_sendmsg+0xb5f/0x10a0 net/unix/af_unix.c:2301
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
____sys_sendmsg+0x6ac/0x940 net/socket.c:2584
___sys_sendmsg+0x135/0x1d0 net/socket.c:2638
__sys_sendmsg+0x117/0x1e0 net/socket.c:2667
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1137 [inline]
free_unref_page_prepare+0x4f8/0xa90 mm/page_alloc.c:2347
free_unref_page+0x33/0x3b0 mm/page_alloc.c:2487
__unfreeze_partials+0x21d/0x240 mm/slub.c:2655
qlink_free mm/kasan/quarantine.c:168 [inline]
qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187
kasan_quarantine_reduce+0x18e/0x1d0 mm/kasan/quarantine.c:294
__kasan_slab_alloc+0x65/0x90 mm/kasan/common.c:305
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3478 [inline]
slab_alloc mm/slub.c:3486 [inline]
__kmem_cache_alloc_lru mm/slub.c:3493 [inline]
kmem_cache_alloc+0x15d/0x380 mm/slub.c:3502
vm_area_dup+0x21/0x2f0 kernel/fork.c:500
__split_vma+0x17d/0x1070 mm/mmap.c:2365
split_vma mm/mmap.c:2437 [inline]
vma_modify+0x25d/0x450 mm/mmap.c:2472
vma_modify_flags include/linux/mm.h:3271 [inline]
mprotect_fixup+0x228/0xc80 mm/mprotect.c:635
do_mprotect_pkey+0x852/0xd60 mm/mprotect.c:809
__do_sys_mprotect mm/mprotect.c:830 [inline]
__se_sys_mprotect mm/mprotect.c:827 [inline]
__x64_sys_mprotect+0x78/0xb0 mm/mprotect.c:827
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Memory state around the buggy address:
ffff88801f3b9b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801f3b9c00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
>ffff88801f3b9c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88801f3b9d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc
ffff88801f3b9d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
Fixes: 876c14ad014d ("af_unix: fix holding spinlock in oob handling")
Reported-and-tested-by: syzbot+7a2d546fa43e49315ed3@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rao Shoaib <rao.shoaib@oracle.com>
Reviewed-by: Rao shoaib <rao.shoaib@oracle.com>
Link: https://lore.kernel.org/r/20231113134938.168151-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The helper functions type_from_irq() and cpu_from_irq() are just one
line functions used only internally.
Open code them where needed. At the same time modify and rename
get_evtchn_to_irq() to return a struct irq_info instead of the IRQ
number.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
get_evtchn_to_irq() has only one external user while irq_from_evtchn()
provides the same functionality and is exported for a wider user base.
Modify the only external user of get_evtchn_to_irq() to use
irq_from_evtchn() instead and make get_evtchn_to_irq() static.
evtchn_from_irq() and irq_from_virq() have a single external user and
can easily be combined to a new helper irq_evtchn_from_virq() allowing
to drop irq_from_virq() and to make evtchn_from_irq() static.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
On failure to parse parameters in ovl_parse_param_lowerdir(), it is
necessary to update ctx->nr with the correct nr before using
ovl_reset_lowerdirs() to release l->name.
Reported-and-tested-by: syzbot+26eedf3631650972f17c@syzkaller.appspotmail.com
Fixes: c835110b588a ("ovl: remove unused code in lowerdir param parsing")
Co-authored-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Remove misleading /** prefix from a regular comment.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311121628.byHp8tkv-lkp@intel.com/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
ChunHao Lin says:
====================
r8169: fix DASH devices network lost issue
This series are used to fix network lost issue on systems that support
DASH. It has been tested on rtl8168ep and rtl8168fp.
====================
Link: https://lore.kernel.org/r/20231109173400.4573-1-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Device that support DASH may be reseted or powered off during suspend.
So driver needs to handle DASH during system suspend and resume. Or
DASH firmware will influence device behavior and causes network lost.
Fixes: b646d90053f8 ("r8169: magic.")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: ChunHao Lin <hau@realtek.com>
Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For devices that support DASH, even DASH is disabled, there may still
exist a default firmware that will influence device behavior.
So driver needs to handle DASH for devices that support DASH, no
matter the DASH status is.
This patch also prepares for "fix network lost after resume on DASH
systems".
Fixes: ee7a1beb9759 ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Linus Walleij says:
====================
Fix large frames in the Gemini ethernet driver
This is the result of a bug hunt for a problem with the
RTL8366RB DSA switch leading me wrong all over the place.
I am indebted to Vladimir Oltean who as usual pointed
out where the real problem was, many thanks!
Tryig to actually use big ("jumbo") frames on this
hardware uncovered the real bugs. Then I tested it on
the DSA switch and it indeed fixes the issue.
To make sure it also works fine with big frames on
non-DSA devices I also copied a large video file over
scp to a device with maximum frame size, the data
was transported in large TCP packets ending up in
0x7ff sized frames using software checksumming at
~2.0 MB/s.
If I set down the MTU to the standard 1500 bytes so
that hardware checksumming is used, the scp transfer
of the same file was slightly lower, ~1.8-1.9 MB/s.
Despite this not being the best test it shows that
we can now stress the hardware with large frames
and that software checksum works fine.
v3: https://lore.kernel.org/r/20231107-gemini-largeframe-fix-v3-0-e3803c080b75@linaro.org
v2: https://lore.kernel.org/r/20231105-gemini-largeframe-fix-v2-0-cd3a5aa6c496@linaro.org
v1: https://lore.kernel.org/r/20231104-gemini-largeframe-fix-v1-0-9c5513f22f33@linaro.org
====================
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-0-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RX max frame size is over 10000 for the Gemini ethernet,
but the TX max frame size is actually just 2047 (0x7ff after
checking the datasheet). Reflect this in what we offer to Linux,
cap the MTU at the TX max frame minus ethernet headers.
We delete the code disabling the hardware checksum for large
MTUs as netdev->mtu can no longer be larger than
netdev->max_mtu meaning the if()-clause in gmac_fix_features()
is never true.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-3-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Gemini ethernet controller provides hardware checksumming
for frames up to 1514 bytes including ethernet headers but not
FCS.
If we start sending bigger frames (after first bumping up the MTU
on both interfaces sending and receiving the frames), truncated
packets start to appear on the target such as in this tcpdump
resulting from ping -s 1474:
23:34:17.241983 14:d6:4d:a8:3c:4f (oui Unknown) > bc:ae:c5:6b:a8:3d (oui Unknown),
ethertype IPv4 (0x0800), length 1514: truncated-ip - 2 bytes missing!
(tos 0x0, ttl 64, id 32653, offset 0, flags [DF], proto ICMP (1), length 1502)
OpenWrt.lan > Fecusia: ICMP echo request, id 1672, seq 50, length 1482
If we bypass the hardware checksumming and provide a software
fallback, everything starts working fine up to the max TX MTU
of 2047 bytes, for example ping -s2000 192.168.1.2:
00:44:29.587598 bc:ae:c5:6b:a8:3d (oui Unknown) > 14:d6:4d:a8:3c:4f (oui Unknown),
ethertype IPv4 (0x0800), length 2042:
(tos 0x0, ttl 64, id 51828, offset 0, flags [none], proto ICMP (1), length 2028)
Fecusia > OpenWrt.lan: ICMP echo reply, id 1683, seq 4, length 2008
The bit enabling to bypass hardware checksum (or any of the
"TSS" bits) are undocumented in the hardware reference manual.
The entire hardware checksum unit appears undocumented. The
conclusion that we need to use the "bypass" bit was found by
trial-and-error.
Since no hardware checksum will happen, we slot in a software
checksum fallback.
Check for the condition where we need to compute checksum on the
skb with either hardware or software using == CHECKSUM_PARTIAL instead
of != CHECKSUM_NONE which is an incomplete check according to
<linux/skbuff.h>.
On the D-Link DIR-685 router this fixes a bug on the conduit
interface to the RTL8366RB DSA switch: as the switch needs to add
space for its tag it increases the MTU on the conduit interface
to 1504 and that means that when the router sends packages
of 1500 bytes these get an extra 4 bytes of DSA tag and the
transfer fails because of the erroneous hardware checksumming,
affecting such basic functionality as the LuCI web interface.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-2-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enumerator 3 is 1548 bytes according to the datasheet.
Not 1542.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20231109-gemini-largeframe-fix-v4-1-6e611528db08@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 9eed321cde22 ("net: lapbether: only support ethernet devices")
has been able to keep syzbot away from net/lapb, until today.
In the following splat [1], the issue is that a lapbether device has
been created on a bonding device without members. Then adding a non
ARPHRD_ETHER member forced the bonding master to change its type.
The fix is to make sure we call dev_close() in bond_setup_by_slave()
so that the potential linked lapbether devices (or any other devices
having assumptions on the physical device) are removed.
A similar bug has been addressed in commit 40baec225765
("bonding: fix panic on non-ARPHRD_ETHER enslave failure")
[1]
skbuff: skb_under_panic: text:ffff800089508810 len:44 put:40 head:ffff0000c78e7c00 data:ffff0000c78e7bea tail:0x16 end:0x140 dev:bond0
kernel BUG at net/core/skbuff.c:192 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 6007 Comm: syz-executor383 Not tainted 6.6.0-rc3-syzkaller-gbf6547d8715b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/04/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic net/core/skbuff.c:188 [inline]
pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202
lr : skb_panic net/core/skbuff.c:188 [inline]
lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:202
sp : ffff800096a06aa0
x29: ffff800096a06ab0 x28: ffff800096a06ba0 x27: dfff800000000000
x26: ffff0000ce9b9b50 x25: 0000000000000016 x24: ffff0000c78e7bea
x23: ffff0000c78e7c00 x22: 000000000000002c x21: 0000000000000140
x20: 0000000000000028 x19: ffff800089508810 x18: ffff800096a06100
x17: 0000000000000000 x16: ffff80008a629a3c x15: 0000000000000001
x14: 1fffe00036837a32 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000201 x10: 0000000000000000 x9 : cb50b496c519aa00
x8 : cb50b496c519aa00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff800096a063b8 x4 : ffff80008e280f80 x3 : ffff8000805ad11c
x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086
Call trace:
skb_panic net/core/skbuff.c:188 [inline]
skb_under_panic+0x13c/0x140 net/core/skbuff.c:202
skb_push+0xf0/0x108 net/core/skbuff.c:2446
ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1384
dev_hard_header include/linux/netdevice.h:3136 [inline]
lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257
lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447
lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149
lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251
__lapb_disconnect_request+0x9c/0x17c net/lapb/lapb_iface.c:326
lapb_device_event+0x288/0x4e0 net/lapb/lapb_iface.c:492
notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93
raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1970 [inline]
call_netdevice_notifiers_extack net/core/dev.c:2008 [inline]
call_netdevice_notifiers net/core/dev.c:2022 [inline]
__dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508
dev_close_many+0x1e0/0x470 net/core/dev.c:1559
dev_close+0x174/0x250 net/core/dev.c:1585
lapbeth_device_event+0x2e4/0x958 drivers/net/wan/lapbether.c:466
notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93
raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1970 [inline]
call_netdevice_notifiers_extack net/core/dev.c:2008 [inline]
call_netdevice_notifiers net/core/dev.c:2022 [inline]
__dev_close_many+0x1b8/0x3c4 net/core/dev.c:1508
dev_close_many+0x1e0/0x470 net/core/dev.c:1559
dev_close+0x174/0x250 net/core/dev.c:1585
bond_enslave+0x2298/0x30cc drivers/net/bonding/bond_main.c:2332
bond_do_ioctl+0x268/0xc64 drivers/net/bonding/bond_main.c:4539
dev_ifsioc+0x754/0x9ac
dev_ioctl+0x4d8/0xd34 net/core/dev_ioctl.c:786
sock_do_ioctl+0x1d4/0x2d0 net/socket.c:1217
sock_ioctl+0x4e8/0x834 net/socket.c:1322
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl fs/ioctl.c:857 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:857
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155
el0_svc+0x58/0x16c arch/arm64/kernel/entry-common.c:678
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:696
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: aa1803e6 aa1903e7 a90023f5 94785b8b (d4210000)
Fixes: 872254dd6b1f ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20231109180102.4085183-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As I was working on a syzbot report, I found that KCSAN would
probably complain that reading q->head or q->tail without
barriers could lead to invalid results.
Add corresponding READ_ONCE() and WRITE_ONCE() to avoid
load-store tearing.
Fixes: d94ba80ebbea ("ptp: Added a brand new class driver for ptp clocks.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20231109174859.3995880-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 8a4f030dbced6fc255cbe67b2d0a129947e18493.
Richard says:
The test itself is harmless, but keeping it will make people think,
"oh this pointer can be invalid."
In fact the core stack ensures that ioctl() can't be invoked after
release(), otherwise Bad Stuff happens.
Fixes: 8a4f030dbced ("ptp: Fixes a null pointer dereference in ptp_ioctl")
Link: https://lore.kernel.org/all/ZVAf_qdRfDAQYUt-@hoboy.vegasvil.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We've rarely been seeing a nonce offset inconsistency that doesn't show
up in tests: this adds some extra verification code to the data update
path that prints out more relevant info when it occurs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We really don't want to be invoking memory reclaim with btree locks
held: even aside from (solvable, but tricky) recursion issues, it can
cause painful to diagnose performance edge cases.
This fixes a recently reported issue in btree_key_can_insert_cached().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Fixes: https://lore.kernel.org/linux-bcachefs/CAGudoHEsb_hGRMeWeXh+UF6po0qQuuq_NKSEo+s1sEb6bDLjpA@mail.gmail.com/T/
|
|
As prep work for the next patch to fix a key cache reclaim issue, we
need to start tracking whether we're currently holding write locks - so
that we can release and retake the before calling into memory reclaim.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The btree key cache maintains lists of items that have been freed, but
can't yet be reclaimed because a bch2_trans_relock() call might find
them - we're waiting for SRCU readers to release.
Previously, we wouldn't count these items against the number we're
attempting to scan for, which would mean we'd evict more live key cache
entries - doing quite a bit of potentially unecessary work.
With recent work to make sure we don't hold SRCU locks for too long, it
should be safe to count all the items on the freelists against number to
scan - even if we can't reclaim them yet, we will be able to soon.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
