Merge tag 'usb-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt driver fixes and ids from Greg KH:
 "Here are a few small USB and Thunderbolt driver fixes and new device
  ids for 6.0-rc7.

  They contain:

   - new usb-serial driver ids

   - documentation build warning fix in USB hub code

   - flexcop-usb long-posted bugfix (the v4l maintainer for this is MIA
     so I have finally picked this up as it is a fix for a reported
     problem.)

   - dwc3 64bit DMA bugfix

   - new thunderbolt device ids

   - typec build error fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: anx7411: Fix build error without CONFIG_POWER_SUPPLY
  media: flexcop-usb: fix endpoint type check
  USB: serial: option: add Quectel RM520N
  USB: serial: option: add Quectel BG95 0x0203 composition
  thunderbolt: Add support for Intel Maple Ridge single port controller
  usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA
  USB: core: Fix RST error in hub.c

7 files changed, 18 insertions, 8 deletions

diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c
index 7835bb0f32fc30..e012b21c4fd7a1 100644
--- a/drivers/media/usb/b2c2/flexcop-usb.c
+++ b/drivers/media/usb/b2c2/flexcop-usb.c
@@ -511,7 +511,7 @@ static int flexcop_usb_init(struct flexcop_usb *fc_usb)
 
 	if (fc_usb->uintf->cur_altsetting->desc.bNumEndpoints < 1)
 		return -ENODEV;
-	if (!usb_endpoint_is_isoc_in(&fc_usb->uintf->cur_altsetting->endpoint[1].desc))
+	if (!usb_endpoint_is_isoc_in(&fc_usb->uintf->cur_altsetting->endpoint[0].desc))
 		return -ENODEV;
 
 	switch (fc_usb->udev->speed) {
diff --git a/drivers/thunderbolt/icm.c b/drivers/thunderbolt/icm.c
index ae38f0d25a8d4b..572b5896caa3fc 100644
--- a/drivers/thunderbolt/icm.c
+++ b/drivers/thunderbolt/icm.c
@@ -2529,6 +2529,7 @@ struct tb *icm_probe(struct tb_nhi *nhi)
 		tb->cm_ops = &icm_icl_ops;
 		break;
 
+	case PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_2C_NHI:
 	case PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_4C_NHI:
 		icm->is_supported = icm_tgl_is_supported;
 		icm->get_mode = icm_ar_get_mode;
diff --git a/drivers/thunderbolt/nhi.h b/drivers/thunderbolt/nhi.h
index f09da5b62233b1..01190d9ced166c 100644
--- a/drivers/thunderbolt/nhi.h
+++ b/drivers/thunderbolt/nhi.h
@@ -55,6 +55,7 @@ extern const struct tb_nhi_ops icl_nhi_ops;
  * need for the PCI quirk anymore as we will use ICM also on Apple
  * hardware.
  */
+#define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_2C_NHI		0x1134
 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_4C_NHI		0x1137
 #define PCI_DEVICE_ID_INTEL_WIN_RIDGE_2C_NHI            0x157d
 #define PCI_DEVICE_ID_INTEL_WIN_RIDGE_2C_BRIDGE         0x157e
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d4b1e70d149829..bbab424b0d5594 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -6039,7 +6039,7 @@ re_enumerate:
  *
  * Return: The same as for usb_reset_and_verify_device().
  * However, if a reset is already in progress (for instance, if a
- * driver doesn't have pre_ or post_reset() callbacks, and while
+ * driver doesn't have pre_reset() or post_reset() callbacks, and while
  * being unbound or re-bound during the ongoing reset its disconnect()
  * or probe() routine tries to perform a second, nested reset), the
  * routine returns -EINPROGRESS.
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 8c8e32651473c0..d0237b30c9befd 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1752,12 +1752,6 @@ static int dwc3_probe(struct platform_device *pdev)
 
 	dwc3_get_properties(dwc);
 
-	if (!dwc->sysdev_is_parent) {
-		ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64));
-		if (ret)
-			return ret;
-	}
-
 	dwc->reset = devm_reset_control_array_get_optional_shared(dev);
 	if (IS_ERR(dwc->reset))
 		return PTR_ERR(dwc->reset);
@@ -1823,6 +1817,13 @@ static int dwc3_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dwc);
 	dwc3_cache_hwparams(dwc);
 
+	if (!dwc->sysdev_is_parent &&
+	    DWC3_GHWPARAMS0_AWIDTH(dwc->hwparams.hwparams0) == 64) {
+		ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64));
+		if (ret)
+			goto disable_clks;
+	}
+
 	spin_lock_init(&dwc->lock);
 	mutex_init(&dwc->mutex);
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index a5e8374a8d710b..697683e3fbffaf 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -256,6 +256,7 @@ static void option_instat_callback(struct urb *urb);
 #define QUECTEL_PRODUCT_EM060K			0x030b
 #define QUECTEL_PRODUCT_EM12			0x0512
 #define QUECTEL_PRODUCT_RM500Q			0x0800
+#define QUECTEL_PRODUCT_RM520N			0x0801
 #define QUECTEL_PRODUCT_EC200S_CN		0x6002
 #define QUECTEL_PRODUCT_EC200T			0x6026
 #define QUECTEL_PRODUCT_RM500K			0x7001
@@ -1138,6 +1139,8 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff),
 	  .driver_info = NUMEP2 },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) },
+	{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0203, 0xff), /* BG95-M3 */
+	  .driver_info = ZLP },
 	{ USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
@@ -1159,6 +1162,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
 	  .driver_info = ZLP },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 5defdfead6538b..831e7049977df5 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -56,6 +56,7 @@ config TYPEC_ANX7411
 	tristate "Analogix ANX7411 Type-C DRP Port controller driver"
 	depends on I2C
 	depends on USB_ROLE_SWITCH
+	depends on POWER_SUPPLY
 	help
 	  Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port
 	  controller driver.