aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/spi/spi-lm70llp.rst4
-rw-r--r--Documentation/spi/spidev.rst2
-rw-r--r--drivers/spi/spi-fsl-lpspi.c8
-rw-r--r--drivers/spi/spi-imx.c4
-rw-r--r--drivers/spi/spi-lm70llp.c4
-rw-r--r--drivers/spi/spi-mem.c2
-rw-r--r--drivers/spi/spi-mt65xx.c22
-rw-r--r--drivers/spi/spi.c24
8 files changed, 38 insertions, 32 deletions
diff --git a/Documentation/spi/spi-lm70llp.rst b/Documentation/spi/spi-lm70llp.rst
index 2f20e5b405e66a..ff98ddc76a7478 100644
--- a/Documentation/spi/spi-lm70llp.rst
+++ b/Documentation/spi/spi-lm70llp.rst
@@ -6,7 +6,7 @@ Supported board/chip:
* National Semiconductor LM70 LLP evaluation board
- Datasheet: http://www.national.com/pf/LM/LM70.html
+ Datasheet: https://www.ti.com/lit/gpn/lm70
Author:
Kaiwan N Billimoria <kaiwan@designergraphix.com>
@@ -28,7 +28,7 @@ Hardware Interfacing
The schematic for this particular board (the LM70EVAL-LLP) is
available (on page 4) here:
- http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf
+ https://download.datasheets.com/pdfs/documentation/nat/kit&board/lm70llpevalmanual.pdf
The hardware interfacing on the LM70 LLP eval board is as follows:
diff --git a/Documentation/spi/spidev.rst b/Documentation/spi/spidev.rst
index 369c657ba4358b..e08b301ad24ac6 100644
--- a/Documentation/spi/spidev.rst
+++ b/Documentation/spi/spidev.rst
@@ -61,7 +61,7 @@ the spidev driver failing to probe.
Sysfs also supports userspace driven binding/unbinding of drivers to
devices that do not bind automatically using one of the tables above.
-To make the spidev driver bind to such a device, use the following:
+To make the spidev driver bind to such a device, use the following::
echo spidev > /sys/bus/spi/devices/spiB.C/driver_override
echo spiB.C > /sys/bus/spi/drivers/spidev/bind
diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 11991eb1263644..079035db7dd859 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -830,11 +830,11 @@ static int fsl_lpspi_probe(struct platform_device *pdev)
is_target = of_property_read_bool((&pdev->dev)->of_node, "spi-slave");
if (is_target)
- controller = spi_alloc_target(&pdev->dev,
- sizeof(struct fsl_lpspi_data));
+ controller = devm_spi_alloc_target(&pdev->dev,
+ sizeof(struct fsl_lpspi_data));
else
- controller = spi_alloc_host(&pdev->dev,
- sizeof(struct fsl_lpspi_data));
+ controller = devm_spi_alloc_host(&pdev->dev,
+ sizeof(struct fsl_lpspi_data));
if (!controller)
return -ENOMEM;
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 833a1bb7a91438..c3e5cee18bea73 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -668,8 +668,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,
ctrl |= (MX51_ECSPI_CTRL_MAX_BURST * BITS_PER_BYTE - 1)
<< MX51_ECSPI_CTRL_BL_OFFSET;
else
- ctrl |= spi_imx->count / DIV_ROUND_UP(spi_imx->bits_per_word,
- BITS_PER_BYTE) * spi_imx->bits_per_word
+ ctrl |= (spi_imx->count / DIV_ROUND_UP(spi_imx->bits_per_word,
+ BITS_PER_BYTE) * spi_imx->bits_per_word - 1)
<< MX51_ECSPI_CTRL_BL_OFFSET;
}
}
diff --git a/drivers/spi/spi-lm70llp.c b/drivers/spi/spi-lm70llp.c
index f982bdebd02838..3c0c24ed1f3dbe 100644
--- a/drivers/spi/spi-lm70llp.c
+++ b/drivers/spi/spi-lm70llp.c
@@ -29,10 +29,10 @@
*
* Datasheet and Schematic:
* The LM70 is a temperature sensor chip from National Semiconductor; its
- * datasheet is available at http://www.national.com/pf/LM/LM70.html
+ * datasheet is available at https://www.ti.com/lit/gpn/lm70
* The schematic for this particular board (the LM70EVAL-LLP) is
* available (on page 4) here:
- * http://www.national.com/appinfo/tempsensors/files/LM70LLPEVALmanual.pdf
+ * https://download.datasheets.com/pdfs/documentation/nat/kit&board/lm70llpevalmanual.pdf
*
* Also see Documentation/spi/spi-lm70llp.rst. The SPI<->parport code here is
* (heavily) based on spi-butterfly by David Brownell.
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index c9d6d42a88f55b..17b8baf749e6aa 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -382,7 +382,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
* read path) and expect the core to use the regular SPI
* interface in other cases.
*/
- if (!ret || ret != -ENOTSUPP || ret != -EOPNOTSUPP) {
+ if (!ret || (ret != -ENOTSUPP && ret != -EOPNOTSUPP)) {
spi_mem_add_op_stats(ctlr->pcpu_statistics, op, ret);
spi_mem_add_op_stats(mem->spi->pcpu_statistics, op, ret);
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 8d4633b353eef6..e4cb22fe007523 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -788,17 +788,19 @@ static irqreturn_t mtk_spi_interrupt(int irq, void *dev_id)
mdata->xfer_len = min(MTK_SPI_MAX_FIFO_SIZE, len);
mtk_spi_setup_packet(host);
- cnt = mdata->xfer_len / 4;
- iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
- trans->tx_buf + mdata->num_xfered, cnt);
+ if (trans->tx_buf) {
+ cnt = mdata->xfer_len / 4;
+ iowrite32_rep(mdata->base + SPI_TX_DATA_REG,
+ trans->tx_buf + mdata->num_xfered, cnt);
- remainder = mdata->xfer_len % 4;
- if (remainder > 0) {
- reg_val = 0;
- memcpy(&reg_val,
- trans->tx_buf + (cnt * 4) + mdata->num_xfered,
- remainder);
- writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+ remainder = mdata->xfer_len % 4;
+ if (remainder > 0) {
+ reg_val = 0;
+ memcpy(&reg_val,
+ trans->tx_buf + (cnt * 4) + mdata->num_xfered,
+ remainder);
+ writel(reg_val, mdata->base + SPI_TX_DATA_REG);
+ }
}
mtk_spi_enable_transfer(host);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index f18738ae95f8f9..ff75838c1b5dfa 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1063,10 +1063,14 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if (spi->mode & SPI_CS_HIGH)
enable = !enable;
- if (spi_is_csgpiod(spi)) {
- if (!spi->controller->set_cs_timing && !activate)
- spi_delay_exec(&spi->cs_hold, NULL);
+ /*
+ * Handle chip select delays for GPIO based CS or controllers without
+ * programmable chip select timing.
+ */
+ if ((spi_is_csgpiod(spi) || !spi->controller->set_cs_timing) && !activate)
+ spi_delay_exec(&spi->cs_hold, NULL);
+ if (spi_is_csgpiod(spi)) {
if (!(spi->mode & SPI_NO_CS)) {
/*
* Historically ACPI has no means of the GPIO polarity and
@@ -1099,16 +1103,16 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
if ((spi->controller->flags & SPI_CONTROLLER_GPIO_SS) &&
spi->controller->set_cs)
spi->controller->set_cs(spi, !enable);
-
- if (!spi->controller->set_cs_timing) {
- if (activate)
- spi_delay_exec(&spi->cs_setup, NULL);
- else
- spi_delay_exec(&spi->cs_inactive, NULL);
- }
} else if (spi->controller->set_cs) {
spi->controller->set_cs(spi, !enable);
}
+
+ if (spi_is_csgpiod(spi) || !spi->controller->set_cs_timing) {
+ if (activate)
+ spi_delay_exec(&spi->cs_setup, NULL);
+ else
+ spi_delay_exec(&spi->cs_inactive, NULL);
+ }
}
#ifdef CONFIG_HAS_DMA
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-11 11:12:07 +0000