[PATCH] fbdev: atyfb: Remove BIOS-less booting

CONFIG_ATYFB_XL_INIT option is broken for a long time.  It will always cause a
kernel hang.

Since no one has fixed this problem for some time now, remove it from atyfb.

Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

5 files changed, 0 insertions, 371 deletions

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 3f04427c9026ed..ba757fb5a65793 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -993,12 +993,6 @@ config FB_ATY_GENERIC_LCD
 	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
 	  Rage XC, or Rage XL chipset.
 
-config FB_ATY_XL_INIT
-	bool "Rage XL No-BIOS Init support"
-	depends on FB_ATY_CT
-	help
-	  Say Y here to support booting a Rage XL without BIOS support.
-
 config FB_ATY_GX
 	bool "Mach64 GX support" if PCI
 	depends on FB_ATY
diff --git a/drivers/video/aty/Makefile b/drivers/video/aty/Makefile
index 9dec96249ffb94..18521397a6e3d6 100644
--- a/drivers/video/aty/Makefile
+++ b/drivers/video/aty/Makefile
@@ -5,7 +5,6 @@ obj-$(CONFIG_FB_RADEON) += radeonfb.o
 atyfb-y				:= atyfb_base.o mach64_accel.o mach64_cursor.o
 atyfb-$(CONFIG_FB_ATY_GX)	+= mach64_gx.o
 atyfb-$(CONFIG_FB_ATY_CT)	+= mach64_ct.o
-atyfb-$(CONFIG_FB_ATY_XL_INIT)  += xlinit.o
 
 atyfb-objs			:= $(atyfb-y)
 
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/aty/atyfb.h
index 09de173c1164bc..71d30b5ea8192d 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/aty/atyfb.h
@@ -354,6 +354,5 @@ static inline void wait_for_idle(struct atyfb_par *par)
 
 extern void aty_reset_engine(const struct atyfb_par *par);
 extern void aty_init_engine(struct atyfb_par *par, struct fb_info *info);
-extern int  atyfb_xl_init(struct fb_info *info);
 extern void aty_st_pll_ct(int offset, u8 val, const struct atyfb_par *par);
 extern u8   aty_ld_pll_ct(int offset, const struct atyfb_par *par);
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index d8195f7da834d0..5a80ac01032f48 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2291,10 +2291,6 @@ static int __init aty_init(struct fb_info *info, const char *name)
 		par->dac_ops = &aty_dac_ct;
 		par->pll_ops = &aty_pll_ct;
 		par->bus_type = PCI;
-#ifdef CONFIG_FB_ATY_XL_INIT
-		if (IS_XL(par->pci_id))
-			atyfb_xl_init(info);
-#endif
 		par->ram_type = (aty_ld_le32(CONFIG_STAT0, par) & 0x07);
 		ramname = aty_ct_ram[par->ram_type];
 		/* for many chips, the mclk is 67 MHz for SDRAM, 63 MHz otherwise */
diff --git a/drivers/video/aty/xlinit.c b/drivers/video/aty/xlinit.c
deleted file mode 100644
index a085cbf74ecb86..00000000000000
--- a/drivers/video/aty/xlinit.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- *  ATI Rage XL Initialization. Support for Xpert98 and Victoria
- *  PCI cards.
- *
- *  Copyright (C) 2002 MontaVista Software Inc.
- *  Author: MontaVista Software, Inc.
- *         	stevel@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h> 
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <video/mach64.h>
-#include "atyfb.h"
-
-#define MPLL_GAIN       0xad
-#define VPLL_GAIN       0xd5
-
-enum {
-	VICTORIA = 0,
-	XPERT98,
-	NUM_XL_CARDS
-};
-
-extern const struct aty_pll_ops aty_pll_ct;
-
-#define DEFAULT_CARD XPERT98
-static int xl_card = DEFAULT_CARD;
-
-static const struct xl_card_cfg_t {
-	int ref_crystal; // 10^4 Hz
-	int mem_type;
-	int mem_size;
-	u32 mem_cntl;
-	u32 ext_mem_cntl;
-	u32 mem_addr_config;
-	u32 bus_cntl;
-	u32 dac_cntl;
-	u32 hw_debug;
-	u32 custom_macro_cntl;
-	u8  dll2_cntl;
-	u8  pll_yclk_cntl;
-} card_cfg[NUM_XL_CARDS] = {
-	// VICTORIA
-	{	2700, SDRAM, 0x800000,
-		0x10757A3B, 0x64000C81, 0x00110202, 0x7b33A040,
-		0x82010102, 0x48803800, 0x005E0179,
-		0x50, 0x25
-	},
-	// XPERT98
-	{	1432,  WRAM, 0x800000,
-		0x00165A2B, 0xE0000CF1, 0x00200213, 0x7333A001,
-		0x8000000A, 0x48833800, 0x007F0779,
-		0x10, 0x19
-	}
-};
-	  
-typedef struct {
-	u8 lcd_reg;
-	u32 val;
-} lcd_tbl_t;
-
-static const lcd_tbl_t lcd_tbl[] = {
-	{ 0x01,	0x000520C0 },
-	{ 0x08,	0x02000408 },
-	{ 0x03,	0x00000F00 },
-	{ 0x00,	0x00000000 },
-	{ 0x02,	0x00000000 },
-	{ 0x04,	0x00000000 },
-	{ 0x05,	0x00000000 },
-	{ 0x06,	0x00000000 },
-	{ 0x33,	0x00000000 },
-	{ 0x34,	0x00000000 },
-	{ 0x35,	0x00000000 },
-	{ 0x36,	0x00000000 },
-	{ 0x37,	0x00000000 }
-};
-
-static void reset_gui(struct atyfb_par *par)
-{
-	aty_st_8(GEN_TEST_CNTL+1, 0x01, par);
-	aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
-	aty_st_8(GEN_TEST_CNTL+1, 0x02, par);
-	mdelay(5);
-}
-
-static void reset_sdram(struct atyfb_par *par)
-{
-	u8 temp;
-
-	temp = aty_ld_8(EXT_MEM_CNTL, par);
-	temp |= 0x02;
-	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_SDRAM_RESET = 1b
-	temp |= 0x08;
-	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST    = 10b
-	temp |= 0x0c;
-	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST    = 11b
-	mdelay(5);
-	temp &= 0xf3;
-	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_CYC_TEST    = 00b
-	temp &= 0xfd;
-	aty_st_8(EXT_MEM_CNTL, temp, par); // MEM_SDRAM_REST  = 0b
-	mdelay(5);
-}
-
-static void init_dll(struct atyfb_par *par)
-{
-	// enable DLL
-	aty_st_pll_ct(PLL_GEN_CNTL,
-		   aty_ld_pll_ct(PLL_GEN_CNTL, par) & 0x7f,
-		   par);
-
-	// reset DLL
-	aty_st_pll_ct(DLL_CNTL, 0x82, par);
-	aty_st_pll_ct(DLL_CNTL, 0xE2, par);
-	mdelay(5);
-	aty_st_pll_ct(DLL_CNTL, 0x82, par);
-	mdelay(6);
-}
-
-static void reset_clocks(struct atyfb_par *par, struct pll_ct *pll,
-			 int hsync_enb)
-{
-	reset_gui(par);
-	aty_st_pll_ct(MCLK_FB_DIV, pll->mclk_fb_div, par);
-	aty_st_pll_ct(SCLK_FB_DIV, pll->sclk_fb_div, par);
-
-	mdelay(15);
-	init_dll(par);
-	aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
-	mdelay(5);
-	aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
-	mdelay(6);
-	reset_sdram(par);
-	aty_st_8(CRTC_GEN_CNTL+3,
-		 hsync_enb ? 0x00 : 0x04, par);
-
-	aty_st_pll_ct(SPLL_CNTL2, pll->spll_cntl2, par);
-	aty_st_pll_ct(PLL_GEN_CNTL, pll->pll_gen_cntl, par);
-	aty_st_pll_ct(PLL_VCLK_CNTL, pll->pll_vclk_cntl, par);
-}
-
-int atyfb_xl_init(struct fb_info *info)
-{
-	const struct xl_card_cfg_t * card = &card_cfg[xl_card];
-	struct atyfb_par *par = (struct atyfb_par *) info->par;
-	union aty_pll pll;
-	int err;
-	u32 temp;
-	
-	aty_st_8(CONFIG_STAT0, 0x85, par);
-	mdelay(10);
-
-	/*
-	 * The following needs to be set before the call
-	 * to var_to_pll() below. They'll be re-set again
-	 * to the same values in aty_init().
-	 */
-	par->ref_clk_per = 100000000UL/card->ref_crystal;
-	par->ram_type = card->mem_type;
-	info->fix.smem_len = card->mem_size;
-	if (xl_card == VICTORIA) {
-		// the MCLK, XCLK are 120MHz on victoria card
-		par->mclk_per = 1000000/120;
-		par->xclk_per = 1000000/120;
-		par->features &= ~M64F_MFB_FORCE_4;
-	}
-	
-	/*
-	 * Calculate mclk and xclk dividers, etc. The passed
-	 * pixclock and bpp values don't matter yet, the vclk
-	 * isn't programmed until later.
-	 */
-	if ((err = aty_pll_ct.var_to_pll(info, 39726, 8, &pll)))
-		return err;
-
-	aty_st_pll_ct(LVDS_CNTL0, 0x00, par);
-	aty_st_pll_ct(DLL2_CNTL, card->dll2_cntl, par);
-	aty_st_pll_ct(V2PLL_CNTL, 0x10, par);
-	aty_st_pll_ct(MPLL_CNTL, MPLL_GAIN, par);
-	aty_st_pll_ct(VPLL_CNTL, VPLL_GAIN, par);
-	aty_st_pll_ct(PLL_VCLK_CNTL, 0x00, par);
-	aty_st_pll_ct(VFC_CNTL, 0x1B, par);
-	aty_st_pll_ct(PLL_REF_DIV, pll.ct.pll_ref_div, par);
-	aty_st_pll_ct(PLL_EXT_CNTL, pll.ct.pll_ext_cntl, par);
-	aty_st_pll_ct(SPLL_CNTL2, 0x03, par);
-	aty_st_pll_ct(PLL_GEN_CNTL, 0x44, par);
-
-	reset_clocks(par, &pll.ct, 0);
-	mdelay(10);
-
-	aty_st_pll_ct(VCLK_POST_DIV, 0x03, par);
-	aty_st_pll_ct(VCLK0_FB_DIV, 0xDA, par);
-	aty_st_pll_ct(VCLK_POST_DIV, 0x0F, par);
-	aty_st_pll_ct(VCLK1_FB_DIV, 0xF5, par);
-	aty_st_pll_ct(VCLK_POST_DIV, 0x3F, par);
-	aty_st_pll_ct(PLL_EXT_CNTL, 0x40 | pll.ct.pll_ext_cntl, par);
-	aty_st_pll_ct(VCLK2_FB_DIV, 0x00, par);
-	aty_st_pll_ct(VCLK_POST_DIV, 0xFF, par);
-	aty_st_pll_ct(PLL_EXT_CNTL, 0xC0 | pll.ct.pll_ext_cntl, par);
-	aty_st_pll_ct(VCLK3_FB_DIV, 0x00, par);
-
-	aty_st_8(BUS_CNTL, 0x01, par);
-	aty_st_le32(BUS_CNTL, card->bus_cntl | 0x08000000, par);
-
-	aty_st_le32(CRTC_GEN_CNTL, 0x04000200, par);
-	aty_st_le16(CONFIG_STAT0, 0x0020, par);
-	aty_st_le32(MEM_CNTL, 0x10151A33, par);
-	aty_st_le32(EXT_MEM_CNTL, 0xE0000C01, par);
-	aty_st_le16(CRTC_GEN_CNTL+2, 0x0000, par);
-	aty_st_le32(DAC_CNTL, card->dac_cntl, par);
-	aty_st_le16(GEN_TEST_CNTL, 0x0100, par);
-	aty_st_le32(CUSTOM_MACRO_CNTL, 0x003C0171, par);
-	aty_st_le32(MEM_BUF_CNTL, 0x00382848, par);
-
-	aty_st_le32(HW_DEBUG, card->hw_debug, par);
-	aty_st_le16(MEM_ADDR_CONFIG, 0x0000, par);
-	aty_st_le16(GP_IO+2, 0x0000, par);
-	aty_st_le16(GEN_TEST_CNTL, 0x0000, par);
-	aty_st_le16(EXT_DAC_REGS+2, 0x0000, par);
-	aty_st_le32(CRTC_INT_CNTL, 0x00000000, par);
-	aty_st_le32(TIMER_CONFIG, 0x00000000, par);
-	aty_st_le32(0xEC, 0x00000000, par);
-	aty_st_le32(0xFC, 0x00000000, par);
-
-#if defined (CONFIG_FB_ATY_GENERIC_LCD)
-	{
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(lcd_tbl); i++)
-			aty_st_lcd(lcd_tbl[i].lcd_reg, lcd_tbl[i].val, par);
-	}
-#endif
-
-	aty_st_le16(CONFIG_STAT0, 0x00A4, par);
-	mdelay(10);
-
-	aty_st_8(BUS_CNTL+1, 0xA0, par);
-	mdelay(10);
-	
-	reset_clocks(par, &pll.ct, 1);
-	mdelay(10);
-
-	// something about power management
-	aty_st_8(LCD_INDEX, 0x08, par);
-	aty_st_8(LCD_DATA, 0x0A, par);
-	aty_st_8(LCD_INDEX, 0x08, par);
-	aty_st_8(LCD_DATA+3, 0x02, par);
-	aty_st_8(LCD_INDEX, 0x08, par);
-	aty_st_8(LCD_DATA, 0x0B, par);
-	mdelay(2);
-	
-	// enable display requests, enable CRTC
-	aty_st_8(CRTC_GEN_CNTL+3, 0x02, par);
-	// disable display
-	aty_st_8(CRTC_GEN_CNTL, 0x40, par);
-	// disable display requests, disable CRTC
-	aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
-	mdelay(10);
-
-	aty_st_pll_ct(PLL_YCLK_CNTL, 0x25, par);
-
-	aty_st_le16(CUSTOM_MACRO_CNTL, 0x0179, par);
-	aty_st_le16(CUSTOM_MACRO_CNTL+2, 0x005E, par);
-	aty_st_le16(CUSTOM_MACRO_CNTL+2, card->custom_macro_cntl>>16, par);
-	aty_st_8(CUSTOM_MACRO_CNTL+1,
-		 (card->custom_macro_cntl>>8) & 0xff, par);
-
-	aty_st_le32(MEM_ADDR_CONFIG, card->mem_addr_config, par);
-	aty_st_le32(MEM_CNTL, card->mem_cntl, par);
-	aty_st_le32(EXT_MEM_CNTL, card->ext_mem_cntl, par);
-
-	aty_st_8(CONFIG_STAT0, 0xA0 | card->mem_type, par);
-
-	aty_st_pll_ct(PLL_YCLK_CNTL, 0x01, par);
-	mdelay(15);
-	aty_st_pll_ct(PLL_YCLK_CNTL, card->pll_yclk_cntl, par);
-	mdelay(1);
-	
-	reset_clocks(par, &pll.ct, 0);
-	mdelay(50);
-	reset_clocks(par, &pll.ct, 0);
-	mdelay(50);
-
-	// enable extended register block
-	aty_st_8(BUS_CNTL+3, 0x7B, par);
-	mdelay(1);
-	// disable extended register block
-	aty_st_8(BUS_CNTL+3, 0x73, par);
-
-	aty_st_8(CONFIG_STAT0, 0x80 | card->mem_type, par);
-
-	// disable display requests, disable CRTC
-	aty_st_8(CRTC_GEN_CNTL+3, 0x04, par);
-	// disable mapping registers in VGA aperture
-	aty_st_8(CONFIG_CNTL, aty_ld_8(CONFIG_CNTL, par) & ~0x04, par);
-	mdelay(50);
-	// enable display requests, enable CRTC
-	aty_st_8(CRTC_GEN_CNTL+3, 0x02, par);
-
-	// make GPIO's 14,15,16 all inputs
-	aty_st_8(LCD_INDEX, 0x07, par);
-	aty_st_8(LCD_DATA+3, 0x00, par);
-
-	// enable the display
-	aty_st_8(CRTC_GEN_CNTL, 0x00, par);
-	mdelay(17);
-	// reset the memory controller
-	aty_st_8(GEN_TEST_CNTL+1, 0x02, par);
-	mdelay(15);
-	aty_st_8(GEN_TEST_CNTL+1, 0x00, par);
-	mdelay(30);
-
-	// enable extended register block
-	aty_st_8(BUS_CNTL+3,
-		 (u8)(aty_ld_8(BUS_CNTL+3, par) | 0x08),
-		 par);
-	// set FIFO size to 512 (PIO)
-	aty_st_le32(GUI_CNTL,
-		    aty_ld_le32(GUI_CNTL, par) & ~0x3,
-		    par);
-
-	// enable CRT and disable lcd
-	aty_st_8(LCD_INDEX, 0x01, par);
-	temp = aty_ld_le32(LCD_DATA, par);
-	temp = (temp | 0x01) & ~0x02;
-	aty_st_le32(LCD_DATA, temp, par);
-	return 0;
-}
-