Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1712 insertions, 0 deletions

diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
new file mode 100644
index 0000000000000..7eff03d9b041c
--- /dev/null
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -0,0 +1,1712 @@
+/* Driver for SCM Microsystems USB-ATAPI cable
+ *
+ * $Id: shuttle_usbat.c,v 1.17 2002/04/22 03:39:43 mdharm Exp $
+ *
+ * Current development and maintenance by:
+ *   (c) 2000, 2001 Robert Baruch (autophile@starband.net)
+ *   (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * Developed with the assistance of:
+ *   (c) 2002 Alan Stern <stern@rowland.org>
+ *
+ * Flash support based on earlier work by:
+ *   (c) 2002 Thomas Kreiling <usbdev@sm04.de>
+ *
+ * Many originally ATAPI devices were slightly modified to meet the USB
+ * market by using some kind of translation from ATAPI to USB on the host,
+ * and the peripheral would translate from USB back to ATAPI.
+ *
+ * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only, 
+ * which does the USB-to-ATAPI conversion.  By obtaining the data sheet on
+ * their device under nondisclosure agreement, I have been able to write
+ * this driver for Linux.
+ *
+ * The chip used in the device can also be used for EPP and ISA translation
+ * as well. This driver is only guaranteed to work with the ATAPI
+ * translation.
+ *
+ * See the Kconfig help text for a list of devices known to be supported by
+ * this driver.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/cdrom.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "shuttle_usbat.h"
+
+#define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+
+static int transferred = 0;
+
+static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
+static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);
+
+/*
+ * Convenience function to produce an ATAPI read/write sectors command
+ * Use cmd=0x20 for read, cmd=0x30 for write
+ */
+static void usbat_pack_atapi_sector_cmd(unsigned char *buf,
+					unsigned char thistime,
+					u32 sector, unsigned char cmd)
+{
+	buf[0] = 0;
+	buf[1] = thistime;
+	buf[2] = sector & 0xFF;
+	buf[3] = (sector >>  8) & 0xFF;
+	buf[4] = (sector >> 16) & 0xFF;
+	buf[5] = 0xE0 | ((sector >> 24) & 0x0F);
+	buf[6] = cmd;
+}
+
+/*
+ * Convenience function to get the device type (flash or hp8200)
+ */
+static int usbat_get_device_type(struct us_data *us)
+{
+	return ((struct usbat_info*)us->extra)->devicetype;
+}
+
+/*
+ * Read a register from the device
+ */
+static int usbat_read(struct us_data *us,
+		      unsigned char access,
+		      unsigned char reg,
+		      unsigned char *content)
+{
+	return usb_stor_ctrl_transfer(us,
+		us->recv_ctrl_pipe,
+		access | USBAT_CMD_READ_REG,
+		0xC0,
+		(u16)reg,
+		0,
+		content,
+		1);
+}
+
+/*
+ * Write to a register on the device
+ */
+static int usbat_write(struct us_data *us,
+		       unsigned char access,
+		       unsigned char reg,
+		       unsigned char content)
+{
+	return usb_stor_ctrl_transfer(us,
+		us->send_ctrl_pipe,
+		access | USBAT_CMD_WRITE_REG,
+		0x40,
+		short_pack(reg, content),
+		0,
+		NULL,
+		0);
+}
+
+/*
+ * Convenience function to perform a bulk read
+ */
+static int usbat_bulk_read(struct us_data *us,
+							 unsigned char *data,
+							 unsigned int len)
+{
+	if (len == 0)
+		return USB_STOR_XFER_GOOD;
+
+	US_DEBUGP("usbat_bulk_read: len = %d\n", len);
+	return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, data, len, NULL);
+}
+
+/*
+ * Convenience function to perform a bulk write
+ */
+static int usbat_bulk_write(struct us_data *us,
+							unsigned char *data,
+							unsigned int len)
+{
+	if (len == 0)
+		return USB_STOR_XFER_GOOD;
+
+	US_DEBUGP("usbat_bulk_write:  len = %d\n", len);
+	return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, data, len, NULL);
+}
+
+/*
+ * Some USBAT-specific commands can only be executed over a command transport
+ * This transport allows one (len=8) or two (len=16) vendor-specific commands
+ * to be executed.
+ */
+static int usbat_execute_command(struct us_data *us,
+								 unsigned char *commands,
+								 unsigned int len)
+{
+	return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+								  USBAT_CMD_EXEC_CMD, 0x40, 0, 0,
+								  commands, len);
+}
+
+/*
+ * Read the status register
+ */
+static int usbat_get_status(struct us_data *us, unsigned char *status)
+{
+	int rc;
+	rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status);
+
+	US_DEBUGP("usbat_get_status: 0x%02X\n", (unsigned short) (*status));
+	return rc;
+}
+
+/*
+ * Check the device status
+ */
+static int usbat_check_status(struct us_data *us)
+{
+	unsigned char *reply = us->iobuf;
+	int rc;
+
+	if (!us)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	rc = usbat_get_status(us, reply);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_FAILED;
+
+	if (*reply & 0x01 && *reply != 0x51) // error/check condition (0x51 is ok)
+		return USB_STOR_TRANSPORT_FAILED;
+
+	if (*reply & 0x20) // device fault
+		return USB_STOR_TRANSPORT_FAILED;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Stores critical information in internal registers in prepartion for the execution
+ * of a conditional usbat_read_blocks or usbat_write_blocks call.
+ */
+static int usbat_set_shuttle_features(struct us_data *us,
+				      unsigned char external_trigger,
+				      unsigned char epp_control,
+				      unsigned char mask_byte,
+				      unsigned char test_pattern,
+				      unsigned char subcountH,
+				      unsigned char subcountL)
+{
+	unsigned char *command = us->iobuf;
+
+	command[0] = 0x40;
+	command[1] = USBAT_CMD_SET_FEAT;
+
+	// The only bit relevant to ATA access is bit 6
+	// which defines 8 bit data access (set) or 16 bit (unset)
+	command[2] = epp_control;
+
+	// If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
+	// ET1 and ET2 define an external event to be checked for on event of a
+	// _read_blocks or _write_blocks operation. The read/write will not take
+	// place unless the defined trigger signal is active.
+	command[3] = external_trigger;
+
+	// The resultant byte of the mask operation (see mask_byte) is compared for
+	// equivalence with this test pattern. If equal, the read/write will take
+	// place.
+	command[4] = test_pattern;
+
+	// This value is logically ANDed with the status register field specified
+	// in the read/write command.
+	command[5] = mask_byte;
+
+	// If ALQ is set in the qualifier, this field contains the address of the
+	// registers where the byte count should be read for transferring the data.
+	// If ALQ is not set, then this field contains the number of bytes to be
+	// transferred.
+	command[6] = subcountL;
+	command[7] = subcountH;
+
+	return usbat_execute_command(us, command, 8);
+}
+
+/*
+ * Block, waiting for an ATA device to become not busy or to report
+ * an error condition.
+ */
+static int usbat_wait_not_busy(struct us_data *us, int minutes)
+{
+	int i;
+	int result;
+	unsigned char *status = us->iobuf;
+
+	/* Synchronizing cache on a CDR could take a heck of a long time,
+	 * but probably not more than 10 minutes or so. On the other hand,
+	 * doing a full blank on a CDRW at speed 1 will take about 75
+	 * minutes!
+	 */
+
+	for (i=0; i<1200+minutes*60; i++) {
+
+ 		result = usbat_get_status(us, status);
+
+		if (result!=USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+		if (*status & 0x01) { // check condition
+			result = usbat_read(us, USBAT_ATA, 0x10, status);
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+		if (*status & 0x20) // device fault
+			return USB_STOR_TRANSPORT_FAILED;
+
+		if ((*status & 0x80)==0x00) { // not busy
+			US_DEBUGP("Waited not busy for %d steps\n", i);
+			return USB_STOR_TRANSPORT_GOOD;
+		}
+
+		if (i<500)
+			msleep(10); // 5 seconds
+		else if (i<700)
+			msleep(50); // 10 seconds
+		else if (i<1200)
+			msleep(100); // 50 seconds
+		else
+			msleep(1000); // X minutes
+	}
+
+	US_DEBUGP("Waited not busy for %d minutes, timing out.\n",
+		minutes);
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Read block data from the data register
+ */
+static int usbat_read_block(struct us_data *us,
+			    unsigned char *content,
+			    unsigned short len)
+{
+	int result;
+	unsigned char *command = us->iobuf;
+
+	if (!len)
+		return USB_STOR_TRANSPORT_GOOD;
+
+	command[0] = 0xC0;
+	command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK;
+	command[2] = USBAT_ATA_DATA;
+	command[3] = 0;
+	command[4] = 0;
+	command[5] = 0;
+	command[6] = LSB_of(len);
+	command[7] = MSB_of(len);
+
+	result = usbat_execute_command(us, command, 8);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	result = usbat_bulk_read(us, content, len);
+	return (result == USB_STOR_XFER_GOOD ?
+			USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
+}
+
+/*
+ * Write block data via the data register
+ */
+static int usbat_write_block(struct us_data *us,
+			     unsigned char access,
+			     unsigned char *content,
+			     unsigned short len,
+			     int minutes)
+{
+	int result;
+	unsigned char *command = us->iobuf;
+
+	if (!len)
+		return USB_STOR_TRANSPORT_GOOD;
+
+	command[0] = 0x40;
+	command[1] = access | USBAT_CMD_WRITE_BLOCK;
+	command[2] = USBAT_ATA_DATA;
+	command[3] = 0;
+	command[4] = 0;
+	command[5] = 0;
+	command[6] = LSB_of(len);
+	command[7] = MSB_of(len);
+
+	result = usbat_execute_command(us, command, 8);
+
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	result = usbat_bulk_write(us, content, len);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return usbat_wait_not_busy(us, minutes);
+}
+
+/*
+ * Process read and write requests
+ */
+static int usbat_hp8200e_rw_block_test(struct us_data *us,
+				       unsigned char access,
+				       unsigned char *registers,
+				       unsigned char *data_out,
+				       unsigned short num_registers,
+				       unsigned char data_reg,
+				       unsigned char status_reg,
+				       unsigned char timeout,
+				       unsigned char qualifier,
+				       int direction,
+				       unsigned char *content,
+				       unsigned short len,
+				       int use_sg,
+				       int minutes)
+{
+	int result;
+	unsigned int pipe = (direction == DMA_FROM_DEVICE) ?
+			us->recv_bulk_pipe : us->send_bulk_pipe;
+
+	unsigned char *command = us->iobuf;
+	int i, j;
+	int cmdlen;
+	unsigned char *data = us->iobuf;
+	unsigned char *status = us->iobuf;
+
+	BUG_ON(num_registers > US_IOBUF_SIZE/2);
+
+	for (i=0; i<20; i++) {
+
+		/*
+		 * The first time we send the full command, which consists
+		 * of downloading the SCSI command followed by downloading
+		 * the data via a write-and-test.  Any other time we only
+		 * send the command to download the data -- the SCSI command
+		 * is still 'active' in some sense in the device.
+		 * 
+		 * We're only going to try sending the data 10 times. After
+		 * that, we just return a failure.
+		 */
+
+		if (i==0) {
+			cmdlen = 16;
+			// Write to multiple registers
+			// Not really sure the 0x07, 0x17, 0xfc, 0xe7 is necessary here,
+			// but that's what came out of the trace every single time.
+			command[0] = 0x40;
+			command[1] = access | USBAT_CMD_WRITE_REGS;
+			command[2] = 0x07;
+			command[3] = 0x17;
+			command[4] = 0xFC;
+			command[5] = 0xE7;
+			command[6] = LSB_of(num_registers*2);
+			command[7] = MSB_of(num_registers*2);
+		} else
+			cmdlen = 8;
+
+		// Conditionally read or write blocks
+		command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
+		command[cmdlen-7] = access |
+				(direction==DMA_TO_DEVICE ?
+				 USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK);
+		command[cmdlen-6] = data_reg;
+		command[cmdlen-5] = status_reg;
+		command[cmdlen-4] = timeout;
+		command[cmdlen-3] = qualifier;
+		command[cmdlen-2] = LSB_of(len);
+		command[cmdlen-1] = MSB_of(len);
+
+		result = usbat_execute_command(us, command, cmdlen);
+
+		if (result != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (i==0) {
+
+			for (j=0; j<num_registers; j++) {
+				data[j<<1] = registers[j];
+				data[1+(j<<1)] = data_out[j];
+			}
+
+			result = usbat_bulk_write(us, data, num_registers*2);
+			if (result != USB_STOR_XFER_GOOD)
+				return USB_STOR_TRANSPORT_ERROR;
+
+		}
+
+
+		//US_DEBUGP("Transfer %s %d bytes, sg buffers %d\n",
+		//	direction == DMA_TO_DEVICE ? "out" : "in",
+		//	len, use_sg);
+
+		result = usb_stor_bulk_transfer_sg(us,
+			pipe, content, len, use_sg, NULL);
+
+		/*
+		 * If we get a stall on the bulk download, we'll retry
+		 * the bulk download -- but not the SCSI command because
+		 * in some sense the SCSI command is still 'active' and
+		 * waiting for the data. Don't ask me why this should be;
+		 * I'm only following what the Windoze driver did.
+		 *
+		 * Note that a stall for the test-and-read/write command means
+		 * that the test failed. In this case we're testing to make
+		 * sure that the device is error-free
+		 * (i.e. bit 0 -- CHK -- of status is 0). The most likely
+		 * hypothesis is that the USBAT chip somehow knows what
+		 * the device will accept, but doesn't give the device any
+		 * data until all data is received. Thus, the device would
+		 * still be waiting for the first byte of data if a stall
+		 * occurs, even if the stall implies that some data was
+		 * transferred.
+		 */
+
+		if (result == USB_STOR_XFER_SHORT ||
+				result == USB_STOR_XFER_STALLED) {
+
+			/*
+			 * If we're reading and we stalled, then clear
+			 * the bulk output pipe only the first time.
+			 */
+
+			if (direction==DMA_FROM_DEVICE && i==0) {
+				if (usb_stor_clear_halt(us,
+						us->send_bulk_pipe) < 0)
+					return USB_STOR_TRANSPORT_ERROR;
+			}
+
+			/*
+			 * Read status: is the device angry, or just busy?
+			 */
+
+ 			result = usbat_read(us, USBAT_ATA, 
+				direction==DMA_TO_DEVICE ?
+					USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS,
+				status);
+
+			if (result!=USB_STOR_XFER_GOOD)
+				return USB_STOR_TRANSPORT_ERROR;
+			if (*status & 0x01) // check condition
+				return USB_STOR_TRANSPORT_FAILED;
+			if (*status & 0x20) // device fault
+				return USB_STOR_TRANSPORT_FAILED;
+
+			US_DEBUGP("Redoing %s\n",
+			  direction==DMA_TO_DEVICE ? "write" : "read");
+
+		} else if (result != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+		else
+			return usbat_wait_not_busy(us, minutes);
+
+	}
+
+	US_DEBUGP("Bummer! %s bulk data 20 times failed.\n",
+		direction==DMA_TO_DEVICE ? "Writing" : "Reading");
+
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Write to multiple registers:
+ * Allows us to write specific data to any registers. The data to be written
+ * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN
+ * which gets sent through bulk out.
+ * Not designed for large transfers of data!
+ */
+static int usbat_multiple_write(struct us_data *us,
+				unsigned char *registers,
+				unsigned char *data_out,
+				unsigned short num_registers)
+{
+	int i, result;
+	unsigned char *data = us->iobuf;
+	unsigned char *command = us->iobuf;
+
+	BUG_ON(num_registers > US_IOBUF_SIZE/2);
+
+	// Write to multiple registers, ATA access
+	command[0] = 0x40;
+	command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;
+
+	// No relevance
+	command[2] = 0;
+	command[3] = 0;
+	command[4] = 0;
+	command[5] = 0;
+
+	// Number of bytes to be transferred (incl. addresses and data)
+	command[6] = LSB_of(num_registers*2);
+	command[7] = MSB_of(num_registers*2);
+
+	// The setup command
+	result = usbat_execute_command(us, command, 8);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	// Create the reg/data, reg/data sequence
+	for (i=0; i<num_registers; i++) {
+		data[i<<1] = registers[i];
+		data[1+(i<<1)] = data_out[i];
+	}
+
+	// Send the data
+	result = usbat_bulk_write(us, data, num_registers*2);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
+		return usbat_wait_not_busy(us, 0);
+	else
+		return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Conditionally read blocks from device:
+ * Allows us to read blocks from a specific data register, based upon the
+ * condition that a status register can be successfully masked with a status
+ * qualifier. If this condition is not initially met, the read will wait
+ * up until a maximum amount of time has elapsed, as specified by timeout.
+ * The read will start when the condition is met, otherwise the command aborts.
+ *
+ * The qualifier defined here is not the value that is masked, it defines
+ * conditions for the write to take place. The actual masked qualifier (and
+ * other related details) are defined beforehand with _set_shuttle_features().
+ */
+static int usbat_read_blocks(struct us_data *us,
+							 unsigned char *buffer,
+							 int len)
+{
+	int result;
+	unsigned char *command = us->iobuf;
+
+	command[0] = 0xC0;
+	command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
+	command[2] = USBAT_ATA_DATA;
+	command[3] = USBAT_ATA_STATUS;
+	command[4] = 0xFD; // Timeout (ms);
+	command[5] = USBAT_QUAL_FCQ;
+	command[6] = LSB_of(len);
+	command[7] = MSB_of(len);
+
+	// Multiple block read setup command
+	result = usbat_execute_command(us, command, 8);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_FAILED;
+	
+	// Read the blocks we just asked for
+	result = usbat_bulk_read(us, buffer, len);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_FAILED;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Conditionally write blocks to device:
+ * Allows us to write blocks to a specific data register, based upon the
+ * condition that a status register can be successfully masked with a status
+ * qualifier. If this condition is not initially met, the write will wait
+ * up until a maximum amount of time has elapsed, as specified by timeout.
+ * The read will start when the condition is met, otherwise the command aborts.
+ *
+ * The qualifier defined here is not the value that is masked, it defines
+ * conditions for the write to take place. The actual masked qualifier (and
+ * other related details) are defined beforehand with _set_shuttle_features().
+ */
+static int usbat_write_blocks(struct us_data *us,
+							  unsigned char *buffer,
+							  int len)
+{
+	int result;
+	unsigned char *command = us->iobuf;
+
+	command[0] = 0x40;
+	command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
+	command[2] = USBAT_ATA_DATA;
+	command[3] = USBAT_ATA_STATUS;
+	command[4] = 0xFD; // Timeout (ms)
+	command[5] = USBAT_QUAL_FCQ;
+	command[6] = LSB_of(len);
+	command[7] = MSB_of(len);
+
+	// Multiple block write setup command
+	result = usbat_execute_command(us, command, 8);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_FAILED;
+	
+	// Write the data
+	result = usbat_bulk_write(us, buffer, len);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_FAILED;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Read the User IO register
+ */
+static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags)
+{
+	int result;
+
+	result = usb_stor_ctrl_transfer(us,
+		us->recv_ctrl_pipe,
+		USBAT_CMD_UIO,
+		0xC0,
+		0,
+		0,
+		data_flags,
+		USBAT_UIO_READ);
+
+	US_DEBUGP("usbat_read_user_io: UIO register reads %02X\n", (unsigned short) (*data_flags));
+
+	return result;
+}
+
+/*
+ * Write to the User IO register
+ */
+static int usbat_write_user_io(struct us_data *us,
+			       unsigned char enable_flags,
+			       unsigned char data_flags)
+{
+	return usb_stor_ctrl_transfer(us,
+		us->send_ctrl_pipe,
+		USBAT_CMD_UIO,
+		0x40,
+		short_pack(enable_flags, data_flags),
+		0,
+		NULL,
+		USBAT_UIO_WRITE);
+}
+
+/*
+ * Reset the device
+ * Often needed on media change.
+ */
+static int usbat_device_reset(struct us_data *us)
+{
+	int rc;
+
+	// Reset peripheral, enable peripheral control signals
+	// (bring reset signal up)
+	rc = usbat_write_user_io(us,
+							 USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
+							 USBAT_UIO_EPAD | USBAT_UIO_1);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+			
+	// Enable peripheral control signals
+	// (bring reset signal down)
+	rc = usbat_write_user_io(us,
+							 USBAT_UIO_OE1  | USBAT_UIO_OE0,
+							 USBAT_UIO_EPAD | USBAT_UIO_1);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Enable card detect
+ */
+static int usbat_device_enable_cdt(struct us_data *us)
+{
+	int rc;
+
+	// Enable peripheral control signals and card detect
+	rc = usbat_write_user_io(us,
+							 USBAT_UIO_ACKD | USBAT_UIO_OE1  | USBAT_UIO_OE0,
+							 USBAT_UIO_EPAD | USBAT_UIO_1);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Determine if media is present.
+ */
+static int usbat_flash_check_media_present(unsigned char *uio)
+{
+	if (*uio & USBAT_UIO_UI0) {
+		US_DEBUGP("usbat_flash_check_media_present: no media detected\n");
+		return USBAT_FLASH_MEDIA_NONE;
+	}
+
+	return USBAT_FLASH_MEDIA_CF;
+}
+
+/*
+ * Determine if media has changed since last operation
+ */
+static int usbat_flash_check_media_changed(unsigned char *uio)
+{
+	if (*uio & USBAT_UIO_0) {
+		US_DEBUGP("usbat_flash_check_media_changed: media change detected\n");
+		return USBAT_FLASH_MEDIA_CHANGED;
+	}
+
+	return USBAT_FLASH_MEDIA_SAME;
+}
+
+/*
+ * Check for media change / no media and handle the situation appropriately
+ */
+static int usbat_flash_check_media(struct us_data *us,
+				   struct usbat_info *info)
+{
+	int rc;
+	unsigned char *uio = us->iobuf;
+
+	rc = usbat_read_user_io(us, uio);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	// Check for media existance
+	rc = usbat_flash_check_media_present(uio);
+	if (rc == USBAT_FLASH_MEDIA_NONE) {
+		info->sense_key = 0x02;
+		info->sense_asc = 0x3A;
+		info->sense_ascq = 0x00;
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	// Check for media change
+	rc = usbat_flash_check_media_changed(uio);
+	if (rc == USBAT_FLASH_MEDIA_CHANGED) {
+
+		// Reset and re-enable card detect
+		rc = usbat_device_reset(us);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+		rc = usbat_device_enable_cdt(us);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		msleep(50);
+
+		rc = usbat_read_user_io(us, uio);
+		if (rc != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+		
+		info->sense_key = UNIT_ATTENTION;
+		info->sense_asc = 0x28;
+		info->sense_ascq = 0x00;
+		return USB_STOR_TRANSPORT_FAILED;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Determine whether we are controlling a flash-based reader/writer,
+ * or a HP8200-based CD drive.
+ * Sets transport functions as appropriate.
+ */
+static int usbat_identify_device(struct us_data *us,
+				 struct usbat_info *info)
+{
+	int rc;
+	unsigned char status;
+
+	if (!us || !info)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	rc = usbat_device_reset(us);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		return rc;
+
+	/*
+	 * By examining the device signature after a reset, we can identify
+	 * whether the device supports the ATAPI packet interface.
+	 * The flash-devices do not support this, whereas the HP CDRW's obviously
+	 * do.
+	 *
+	 * This method is not ideal, but works because no other devices have been
+	 * produced based on the USBAT/USBAT02.
+	 *
+	 * Section 9.1 of the ATAPI-4 spec states (amongst other things) that
+	 * after a device reset, a Cylinder low of 0x14 indicates that the device
+	 * does support packet commands.
+	 */
+	rc = usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, &status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	US_DEBUGP("usbat_identify_device: Cylinder low is %02X\n", status);
+
+	if (status == 0x14) {
+		// Device is HP 8200
+		US_DEBUGP("usbat_identify_device: Detected HP8200 CDRW\n");
+		info->devicetype = USBAT_DEV_HP8200;
+	} else {
+		// Device is a CompactFlash reader/writer
+		US_DEBUGP("usbat_identify_device: Detected Flash reader/writer\n");
+		info->devicetype = USBAT_DEV_FLASH;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Set the transport function based on the device type
+ */
+static int usbat_set_transport(struct us_data *us,
+			       struct usbat_info *info)
+{
+	int rc;
+
+	if (!info->devicetype) {
+		rc = usbat_identify_device(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD) {
+			US_DEBUGP("usbat_set_transport: Could not identify device\n");
+			return 1;
+		}
+	}
+
+	if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
+		us->transport = usbat_hp8200e_transport;
+	else if (usbat_get_device_type(us) == USBAT_DEV_FLASH)
+		us->transport = usbat_flash_transport;
+
+	return 0;
+}
+
+/*
+ * Read the media capacity
+ */
+static int usbat_flash_get_sector_count(struct us_data *us,
+					struct usbat_info *info)
+{
+	unsigned char registers[3] = {
+		USBAT_ATA_SECCNT,
+		USBAT_ATA_DEVICE,
+		USBAT_ATA_CMD,
+	};
+	unsigned char  command[3] = { 0x01, 0xA0, 0xEC };
+	unsigned char *reply;
+	unsigned char status;
+	int rc;
+
+	if (!us || !info)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	reply = kmalloc(512, GFP_NOIO);
+	if (!reply)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	// ATAPI command : IDENTIFY DEVICE
+	rc = usbat_multiple_write(us, registers, command, 3);
+	if (rc != USB_STOR_XFER_GOOD) {
+		US_DEBUGP("usbat_flash_get_sector_count: Gah! identify_device failed\n");
+		rc = USB_STOR_TRANSPORT_ERROR;
+		goto leave;
+	}
+
+	// Read device status
+	if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
+		rc = USB_STOR_TRANSPORT_ERROR;
+		goto leave;
+	}
+
+	msleep(100);
+
+	// Read the device identification data
+	rc = usbat_read_block(us, reply, 512);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		goto leave;
+
+	info->sectors = ((u32)(reply[117]) << 24) |
+		((u32)(reply[116]) << 16) |
+		((u32)(reply[115]) <<  8) |
+		((u32)(reply[114])      );
+
+	rc = USB_STOR_TRANSPORT_GOOD;
+
+ leave:
+	kfree(reply);
+	return rc;
+}
+
+/*
+ * Read data from device
+ */
+static int usbat_flash_read_data(struct us_data *us,
+								 struct usbat_info *info,
+								 u32 sector,
+								 u32 sectors)
+{
+	unsigned char registers[7] = {
+		USBAT_ATA_FEATURES,
+		USBAT_ATA_SECCNT,
+		USBAT_ATA_SECNUM,
+		USBAT_ATA_LBA_ME,
+		USBAT_ATA_LBA_HI,
+		USBAT_ATA_DEVICE,
+		USBAT_ATA_STATUS,
+	};
+	unsigned char command[7];
+	unsigned char *buffer;
+	unsigned char  thistime;
+	unsigned int totallen, alloclen;
+	int len, result;
+	unsigned int sg_idx = 0, sg_offset = 0;
+
+	result = usbat_flash_check_media(us, info);
+	if (result != USB_STOR_TRANSPORT_GOOD)
+		return result;
+
+	// we're working in LBA mode.  according to the ATA spec,
+	// we can support up to 28-bit addressing.  I don't know if Jumpshot
+	// supports beyond 24-bit addressing.  It's kind of hard to test
+	// since it requires > 8GB CF card.
+
+	if (sector > 0x0FFFFFFF)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	totallen = sectors * info->ssize;
+
+	// Since we don't read more than 64 KB at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	alloclen = min(totallen, 65536u);
+	buffer = kmalloc(alloclen, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	do {
+		// loop, never allocate or transfer more than 64k at once
+		// (min(128k, 255*info->ssize) is the real limit)
+		len = min(totallen, alloclen);
+		thistime = (len / info->ssize) & 0xff;
+ 
+		// ATAPI command 0x20 (READ SECTORS)
+		usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x20);
+
+		// Write/execute ATAPI read command
+		result = usbat_multiple_write(us, registers, command, 7);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			goto leave;
+
+		// Read the data we just requested
+		result = usbat_read_blocks(us, buffer, len);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			goto leave;
+  	 
+		US_DEBUGP("usbat_flash_read_data:  %d bytes\n", len);
+	
+		// Store the data in the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+					 &sg_idx, &sg_offset, TO_XFER_BUF);
+
+		sector += thistime;
+		totallen -= len;
+	} while (totallen > 0);
+
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_GOOD;
+
+leave:
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+/*
+ * Write data to device
+ */
+static int usbat_flash_write_data(struct us_data *us,
+								  struct usbat_info *info,
+								  u32 sector,
+								  u32 sectors)
+{
+	unsigned char registers[7] = {
+		USBAT_ATA_FEATURES,
+		USBAT_ATA_SECCNT,
+		USBAT_ATA_SECNUM,
+		USBAT_ATA_LBA_ME,
+		USBAT_ATA_LBA_HI,
+		USBAT_ATA_DEVICE,
+		USBAT_ATA_STATUS,
+	};
+	unsigned char command[7];
+	unsigned char *buffer;
+	unsigned char  thistime;
+	unsigned int totallen, alloclen;
+	int len, result;
+	unsigned int sg_idx = 0, sg_offset = 0;
+
+	result = usbat_flash_check_media(us, info);
+	if (result != USB_STOR_TRANSPORT_GOOD)
+		return result;
+
+	// we're working in LBA mode.  according to the ATA spec,
+	// we can support up to 28-bit addressing.  I don't know if Jumpshot
+	// supports beyond 24-bit addressing.  It's kind of hard to test
+	// since it requires > 8GB CF card.
+
+	if (sector > 0x0FFFFFFF)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	totallen = sectors * info->ssize;
+
+	// Since we don't write more than 64 KB at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	alloclen = min(totallen, 65536u);
+	buffer = kmalloc(alloclen, GFP_NOIO);
+	if (buffer == NULL)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	do {
+		// loop, never allocate or transfer more than 64k at once
+		// (min(128k, 255*info->ssize) is the real limit)
+		len = min(totallen, alloclen);
+		thistime = (len / info->ssize) & 0xff;
+
+		// Get the data from the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, us->srb,
+					 &sg_idx, &sg_offset, FROM_XFER_BUF);
+
+		// ATAPI command 0x30 (WRITE SECTORS)
+		usbat_pack_atapi_sector_cmd(command, thistime, sector, 0x30);		
+
+		// Write/execute ATAPI write command
+		result = usbat_multiple_write(us, registers, command, 7);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			goto leave;
+
+		// Write the data
+		result = usbat_write_blocks(us, buffer, len);
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			goto leave;
+
+		sector += thistime;
+		totallen -= len;
+	} while (totallen > 0);
+
+	kfree(buffer);
+	return result;
+
+leave:
+	kfree(buffer);
+	return USB_STOR_TRANSPORT_ERROR;
+}
+
+/*
+ * Squeeze a potentially huge (> 65535 byte) read10 command into
+ * a little ( <= 65535 byte) ATAPI pipe
+ */
+static int usbat_hp8200e_handle_read10(struct us_data *us,
+				       unsigned char *registers,
+				       unsigned char *data,
+				       struct scsi_cmnd *srb)
+{
+	int result = USB_STOR_TRANSPORT_GOOD;
+	unsigned char *buffer;
+	unsigned int len;
+	unsigned int sector;
+	unsigned int sg_segment = 0;
+	unsigned int sg_offset = 0;
+
+	US_DEBUGP("handle_read10: transfersize %d\n",
+		srb->transfersize);
+
+	if (srb->request_bufflen < 0x10000) {
+
+		result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 
+			registers, data, 19,
+			USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
+			(USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+			DMA_FROM_DEVICE,
+			srb->request_buffer, 
+			srb->request_bufflen, srb->use_sg, 1);
+
+		return result;
+	}
+
+	/*
+	 * Since we're requesting more data than we can handle in
+	 * a single read command (max is 64k-1), we will perform
+	 * multiple reads, but each read must be in multiples of
+	 * a sector.  Luckily the sector size is in srb->transfersize
+	 * (see linux/drivers/scsi/sr.c).
+	 */
+
+	if (data[7+0] == GPCMD_READ_CD) {
+		len = short_pack(data[7+9], data[7+8]);
+		len <<= 16;
+		len |= data[7+7];
+		US_DEBUGP("handle_read10: GPCMD_READ_CD: len %d\n", len);
+		srb->transfersize = srb->request_bufflen/len;
+	}
+
+	if (!srb->transfersize)  {
+		srb->transfersize = 2048; /* A guess */
+		US_DEBUGP("handle_read10: transfersize 0, forcing %d\n",
+			srb->transfersize);
+	}
+
+	// Since we only read in one block at a time, we have to create
+	// a bounce buffer and move the data a piece at a time between the
+	// bounce buffer and the actual transfer buffer.
+
+	len = (65535/srb->transfersize) * srb->transfersize;
+	US_DEBUGP("Max read is %d bytes\n", len);
+	len = min(len, srb->request_bufflen);
+	buffer = kmalloc(len, GFP_NOIO);
+	if (buffer == NULL) // bloody hell!
+		return USB_STOR_TRANSPORT_FAILED;
+	sector = short_pack(data[7+3], data[7+2]);
+	sector <<= 16;
+	sector |= short_pack(data[7+5], data[7+4]);
+	transferred = 0;
+
+	sg_segment = 0; // for keeping track of where we are in
+	sg_offset = 0;  // the scatter/gather list
+
+	while (transferred != srb->request_bufflen) {
+
+		if (len > srb->request_bufflen - transferred)
+			len = srb->request_bufflen - transferred;
+
+		data[3] = len&0xFF; 	  // (cylL) = expected length (L)
+		data[4] = (len>>8)&0xFF;  // (cylH) = expected length (H)
+
+		// Fix up the SCSI command sector and num sectors
+
+		data[7+2] = MSB_of(sector>>16); // SCSI command sector
+		data[7+3] = LSB_of(sector>>16);
+		data[7+4] = MSB_of(sector&0xFFFF);
+		data[7+5] = LSB_of(sector&0xFFFF);
+		if (data[7+0] == GPCMD_READ_CD)
+			data[7+6] = 0;
+		data[7+7] = MSB_of(len / srb->transfersize); // SCSI command
+		data[7+8] = LSB_of(len / srb->transfersize); // num sectors
+
+		result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 
+			registers, data, 19,
+			USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, 
+			(USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+			DMA_FROM_DEVICE,
+			buffer,
+			len, 0, 1);
+
+		if (result != USB_STOR_TRANSPORT_GOOD)
+			break;
+
+		// Store the data in the transfer buffer
+		usb_stor_access_xfer_buf(buffer, len, srb,
+				 &sg_segment, &sg_offset, TO_XFER_BUF);
+
+		// Update the amount transferred and the sector number
+
+		transferred += len;
+		sector += len / srb->transfersize;
+
+	} // while transferred != srb->request_bufflen
+
+	kfree(buffer);
+	return result;
+}
+
+static int usbat_select_and_test_registers(struct us_data *us)
+{
+	int selector;
+	unsigned char *status = us->iobuf;
+	unsigned char max_selector = 0xB0;
+	if (usbat_get_device_type(us) == USBAT_DEV_FLASH)
+		max_selector = 0xA0;
+
+	// try device = master, then device = slave.
+
+	for (selector = 0xA0; selector <= max_selector; selector += 0x10) {
+
+		if (usbat_get_device_type(us) == USBAT_DEV_HP8200 &&
+			usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
+				USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Initialize the USBAT processor and the storage device
+ */
+int init_usbat(struct us_data *us)
+{
+	int rc;
+	struct usbat_info *info;
+	unsigned char subcountH = USBAT_ATA_LBA_HI;
+	unsigned char subcountL = USBAT_ATA_LBA_ME;
+	unsigned char *status = us->iobuf;
+
+	us->extra = kmalloc(sizeof(struct usbat_info), GFP_NOIO);
+	if (!us->extra) {
+		US_DEBUGP("init_usbat: Gah! Can't allocate storage for usbat info struct!\n");
+		return 1;
+	}
+	memset(us->extra, 0, sizeof(struct usbat_info));
+	info = (struct usbat_info *) (us->extra);
+
+	// Enable peripheral control signals
+	rc = usbat_write_user_io(us,
+				 USBAT_UIO_OE1 | USBAT_UIO_OE0,
+				 USBAT_UIO_EPAD | USBAT_UIO_1);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	US_DEBUGP("INIT 1\n");
+
+	msleep(2000);
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		return rc;
+
+	US_DEBUGP("INIT 2\n");
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	US_DEBUGP("INIT 3\n");
+
+	// At this point, we need to detect which device we are using
+	if (usbat_set_transport(us, info))
+		return USB_STOR_TRANSPORT_ERROR;
+
+	US_DEBUGP("INIT 4\n");
+
+	if (usbat_get_device_type(us) == USBAT_DEV_HP8200) {
+		msleep(250);
+
+		// Write 0x80 to ISA port 0x3F
+		rc = usbat_write(us, USBAT_ISA, 0x3F, 0x80);
+		if (rc != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		US_DEBUGP("INIT 5\n");
+
+		// Read ISA port 0x27
+		rc = usbat_read(us, USBAT_ISA, 0x27, status);
+		if (rc != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		US_DEBUGP("INIT 6\n");
+
+		rc = usbat_read_user_io(us, status);
+		if (rc != USB_STOR_XFER_GOOD)
+			return USB_STOR_TRANSPORT_ERROR;
+
+		US_DEBUGP("INIT 7\n");
+	}
+
+	rc = usbat_select_and_test_registers(us);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		return rc;
+
+	US_DEBUGP("INIT 8\n");
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	US_DEBUGP("INIT 9\n");
+
+	// Enable peripheral control signals and card detect
+	rc = usbat_device_enable_cdt(us);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		return rc;
+
+	US_DEBUGP("INIT 10\n");
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	US_DEBUGP("INIT 11\n");
+
+	msleep(1400);
+
+	rc = usbat_read_user_io(us, status);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	US_DEBUGP("INIT 12\n");
+
+	rc = usbat_select_and_test_registers(us);
+	if (rc != USB_STOR_TRANSPORT_GOOD)
+		return rc;
+
+	US_DEBUGP("INIT 13\n");
+
+	if (usbat_get_device_type(us) == USBAT_DEV_FLASH) { 
+		subcountH = 0x02;
+		subcountL = 0x00;
+	}
+	rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1),
+									0x00, 0x88, 0x08, subcountH, subcountL);
+	if (rc != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+
+	US_DEBUGP("INIT 14\n");
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Transport for the HP 8200e
+ */
+static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	int result;
+	unsigned char *status = us->iobuf;
+	unsigned char registers[32];
+	unsigned char data[32];
+	unsigned int len;
+	int i;
+	char string[64];
+
+	len = srb->request_bufflen;
+
+	/* Send A0 (ATA PACKET COMMAND).
+	   Note: I guess we're never going to get any of the ATA
+	   commands... just ATA Packet Commands.
+ 	 */
+
+	registers[0] = USBAT_ATA_FEATURES;
+	registers[1] = USBAT_ATA_SECCNT;
+	registers[2] = USBAT_ATA_SECNUM;
+	registers[3] = USBAT_ATA_LBA_ME;
+	registers[4] = USBAT_ATA_LBA_HI;
+	registers[5] = USBAT_ATA_DEVICE;
+	registers[6] = USBAT_ATA_CMD;
+	data[0] = 0x00;
+	data[1] = 0x00;
+	data[2] = 0x00;
+	data[3] = len&0xFF; 		// (cylL) = expected length (L)
+	data[4] = (len>>8)&0xFF; 	// (cylH) = expected length (H)
+	data[5] = 0xB0; 		// (device sel) = slave
+	data[6] = 0xA0; 		// (command) = ATA PACKET COMMAND
+
+	for (i=7; i<19; i++) {
+		registers[i] = 0x10;
+		data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7];
+	}
+
+	result = usbat_get_status(us, status);
+	US_DEBUGP("Status = %02X\n", *status);
+	if (result != USB_STOR_XFER_GOOD)
+		return USB_STOR_TRANSPORT_ERROR;
+	if (srb->cmnd[0] == TEST_UNIT_READY)
+		transferred = 0;
+
+	if (srb->sc_data_direction == DMA_TO_DEVICE) {
+
+		result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 
+			registers, data, 19,
+			USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
+			(USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
+			DMA_TO_DEVICE,
+			srb->request_buffer, 
+			len, srb->use_sg, 10);
+
+		if (result == USB_STOR_TRANSPORT_GOOD) {
+			transferred += len;
+			US_DEBUGP("Wrote %08X bytes\n", transferred);
+		}
+
+		return result;
+
+	} else if (srb->cmnd[0] == READ_10 ||
+		   srb->cmnd[0] == GPCMD_READ_CD) {
+
+		return usbat_hp8200e_handle_read10(us, registers, data, srb);
+
+	}
+
+	if (len > 0xFFFF) {
+		US_DEBUGP("Error: len = %08X... what do I do now?\n",
+			len);
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	if ( (result = usbat_multiple_write(us, 
+			registers, data, 7)) != USB_STOR_TRANSPORT_GOOD) {
+		return result;
+	}
+
+	// Write the 12-byte command header.
+
+	// If the command is BLANK then set the timer for 75 minutes.
+	// Otherwise set it for 10 minutes.
+
+	// NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
+	// AT SPEED 4 IS UNRELIABLE!!!
+
+	if ( (result = usbat_write_block(us, 
+			USBAT_ATA, srb->cmnd, 12,
+			srb->cmnd[0]==GPCMD_BLANK ? 75 : 10)) !=
+				USB_STOR_TRANSPORT_GOOD) {
+		return result;
+	}
+
+	// If there is response data to be read in 
+	// then do it here.
+
+	if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {
+
+		// How many bytes to read in? Check cylL register
+
+		if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
+		    	USB_STOR_XFER_GOOD) {
+			return USB_STOR_TRANSPORT_ERROR;
+		}
+
+		if (len > 0xFF) { // need to read cylH also
+			len = *status;
+			if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
+				    USB_STOR_XFER_GOOD) {
+				return USB_STOR_TRANSPORT_ERROR;
+			}
+			len += ((unsigned int) *status)<<8;
+		}
+		else
+			len = *status;
+
+
+		result = usbat_read_block(us, srb->request_buffer, len);
+
+		/* Debug-print the first 32 bytes of the transfer */
+
+		if (!srb->use_sg) {
+			string[0] = 0;
+			for (i=0; i<len && i<32; i++) {
+				sprintf(string+strlen(string), "%02X ",
+				  ((unsigned char *)srb->request_buffer)[i]);
+				if ((i%16)==15) {
+					US_DEBUGP("%s\n", string);
+					string[0] = 0;
+				}
+			}
+			if (string[0]!=0)
+				US_DEBUGP("%s\n", string);
+		}
+	}
+
+	return result;
+}
+
+/*
+ * Transport for USBAT02-based CompactFlash and similar storage devices
+ */
+static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
+{
+	int rc;
+	struct usbat_info *info = (struct usbat_info *) (us->extra);
+	unsigned long block, blocks;
+	unsigned char *ptr = us->iobuf;
+	static unsigned char inquiry_response[36] = {
+		0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+	};
+
+	if (srb->cmnd[0] == INQUIRY) {
+		US_DEBUGP("usbat_flash_transport: INQUIRY. Returning bogus response.\n");
+		memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+		fill_inquiry_response(us, ptr, 36);
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == READ_CAPACITY) {
+		rc = usbat_flash_check_media(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		rc = usbat_flash_get_sector_count(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		info->ssize = 0x200;  // hard coded 512 byte sectors as per ATA spec
+		US_DEBUGP("usbat_flash_transport: READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
+			  info->sectors, info->ssize);
+
+		// build the reply
+		// note: must return the sector number of the last sector,
+		// *not* the total number of sectors
+		((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
+		((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
+		usb_stor_set_xfer_buf(ptr, 8, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == MODE_SELECT_10) {
+		US_DEBUGP("usbat_flash_transport:  Gah! MODE_SELECT_10.\n");
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	if (srb->cmnd[0] == READ_10) {
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+				((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+		US_DEBUGP("usbat_flash_transport:  READ_10: read block 0x%04lx  count %ld\n", block, blocks);
+		return usbat_flash_read_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == READ_12) {
+		// I don't think we'll ever see a READ_12 but support it anyway...
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+		        ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+		         ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
+
+		US_DEBUGP("usbat_flash_transport: READ_12: read block 0x%04lx  count %ld\n", block, blocks);
+		return usbat_flash_read_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == WRITE_10) {
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+		        ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));
+
+		US_DEBUGP("usbat_flash_transport: WRITE_10: write block 0x%04lx  count %ld\n", block, blocks);
+		return usbat_flash_write_data(us, info, block, blocks);
+	}
+
+	if (srb->cmnd[0] == WRITE_12) {
+		// I don't think we'll ever see a WRITE_12 but support it anyway...
+		block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
+		        ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));
+
+		blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
+		         ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));
+
+		US_DEBUGP("usbat_flash_transport: WRITE_12: write block 0x%04lx  count %ld\n", block, blocks);
+		return usbat_flash_write_data(us, info, block, blocks);
+	}
+
+
+	if (srb->cmnd[0] == TEST_UNIT_READY) {
+		US_DEBUGP("usbat_flash_transport: TEST_UNIT_READY.\n");
+
+		rc = usbat_flash_check_media(us, info);
+		if (rc != USB_STOR_TRANSPORT_GOOD)
+			return rc;
+
+		return usbat_check_status(us);
+	}
+
+	if (srb->cmnd[0] == REQUEST_SENSE) {
+		US_DEBUGP("usbat_flash_transport: REQUEST_SENSE.\n");
+
+		memset(ptr, 0, 18);
+		ptr[0] = 0xF0;
+		ptr[2] = info->sense_key;
+		ptr[7] = 11;
+		ptr[12] = info->sense_asc;
+		ptr[13] = info->sense_ascq;
+		usb_stor_set_xfer_buf(ptr, 18, srb);
+
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+		// sure.  whatever.  not like we can stop the user from popping
+		// the media out of the device (no locking doors, etc)
+		return USB_STOR_TRANSPORT_GOOD;
+	}
+
+	US_DEBUGP("usbat_flash_transport: Gah! Unknown command: %d (0x%x)\n",
+			  srb->cmnd[0], srb->cmnd[0]);
+	info->sense_key = 0x05;
+	info->sense_asc = 0x20;
+	info->sense_ascq = 0x00;
+	return USB_STOR_TRANSPORT_FAILED;
+}
+
+/*
+ * Default transport function. Attempts to detect which transport function
+ * should be called, makes it the new default, and calls it.
+ *
+ * This function should never be called. Our usbat_init() function detects the
+ * device type and changes the us->transport ptr to the transport function
+ * relevant to the device.
+ * However, we'll support this impossible(?) case anyway.
+ */
+int usbat_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+	struct usbat_info *info = (struct usbat_info*) (us->extra);
+
+	if (usbat_set_transport(us, info))
+		return USB_STOR_TRANSPORT_ERROR;
+
+	return us->transport(srb, us);	
+}
+