usb-storage: make karma a separate module

This patch (as1216) converts usb-storage's karma subdriver into a
separate module.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 91 insertions, 5 deletions

diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c
index 0d79ae5683f76e..cfb8e60866b818 100644
--- a/drivers/usb/storage/karma.c
+++ b/drivers/usb/storage/karma.c
@@ -18,6 +18,8 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#include <linux/module.h>
+
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -25,7 +27,6 @@
 #include "usb.h"
 #include "transport.h"
 #include "debug.h"
-#include "karma.h"
 
 #define RIO_PREFIX "RIOP\x00"
 #define RIO_PREFIX_LEN 5
@@ -36,13 +37,53 @@
 #define RIO_LEAVE_STORAGE 0x2
 #define RIO_RESET 0xC
 
-extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data *);
-
 struct karma_data {
 	int in_storage;
 	char *recv;
 };
 
+static int rio_karma_init(struct us_data *us);
+
+
+/*
+ * The table of devices
+ */
+#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
+		    vendorName, productName, useProtocol, useTransport, \
+		    initFunction, flags) \
+{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
+  .driver_info = (flags)|(USB_US_TYPE_STOR<<24) }
+
+struct usb_device_id karma_usb_ids[] = {
+#	include "unusual_karma.h"
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, karma_usb_ids);
+
+#undef UNUSUAL_DEV
+
+/*
+ * The flags table
+ */
+#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
+		    vendor_name, product_name, use_protocol, use_transport, \
+		    init_function, Flags) \
+{ \
+	.vendorName = vendor_name,	\
+	.productName = product_name,	\
+	.useProtocol = use_protocol,	\
+	.useTransport = use_transport,	\
+	.initFunction = init_function,	\
+}
+
+static struct us_unusual_dev karma_unusual_dev_list[] = {
+#	include "unusual_karma.h"
+	{ }		/* Terminating entry */
+};
+
+#undef UNUSUAL_DEV
+
+
 /*
  * Send commands to Rio Karma.
  *
@@ -104,7 +145,7 @@ err:
  * Trap START_STOP and READ_10 to leave/re-enter storage mode.
  * Everything else is propagated to the normal bulk layer.
  */
-int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
+static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us)
 {
 	int ret;
 	struct karma_data *data = (struct karma_data *) us->extra;
@@ -133,7 +174,7 @@ static void rio_karma_destructor(void *extra)
 	kfree(data->recv);
 }
 
-int rio_karma_init(struct us_data *us)
+static int rio_karma_init(struct us_data *us)
 {
 	int ret = 0;
 	struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO);
@@ -153,3 +194,48 @@ int rio_karma_init(struct us_data *us)
 out:
 	return ret;
 }
+
+static int karma_probe(struct usb_interface *intf,
+			 const struct usb_device_id *id)
+{
+	struct us_data *us;
+	int result;
+
+	result = usb_stor_probe1(&us, intf, id,
+			(id - karma_usb_ids) + karma_unusual_dev_list);
+	if (result)
+		return result;
+
+	us->transport_name = "Rio Karma/Bulk";
+	us->transport = rio_karma_transport;
+	us->transport_reset = usb_stor_Bulk_reset;
+
+	result = usb_stor_probe2(us);
+	return result;
+}
+
+static struct usb_driver karma_driver = {
+	.name =		"ums-karma",
+	.probe =	karma_probe,
+	.disconnect =	usb_stor_disconnect,
+	.suspend =	usb_stor_suspend,
+	.resume =	usb_stor_resume,
+	.reset_resume =	usb_stor_reset_resume,
+	.pre_reset =	usb_stor_pre_reset,
+	.post_reset =	usb_stor_post_reset,
+	.id_table =	karma_usb_ids,
+	.soft_unbind =	1,
+};
+
+static int __init karma_init(void)
+{
+	return usb_register(&karma_driver);
+}
+
+static void __exit karma_exit(void)
+{
+	usb_deregister(&karma_driver);
+}
+
+module_init(karma_init);
+module_exit(karma_exit);