usb: storage: fix multi-line comment style

No functional changes here, just making sure our
storage driver uses a consistent multi-line comment
style.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 20 insertions, 14 deletions

diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c
index c80d3dec9a34fc..5e4af44d7d9fc8 100644
--- a/drivers/usb/storage/cypress_atacb.c
+++ b/drivers/usb/storage/cypress_atacb.c
@@ -110,13 +110,17 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 	/* first build the ATACB command */
 	srb->cmd_len = 16;
 
-	srb->cmnd[0] = 0x24; /* bVSCBSignature : vendor-specific command
-	                        this value can change, but most(all ?) manufacturers
-							keep the cypress default : 0x24 */
+	srb->cmnd[0] = 0x24; /*
+			      * bVSCBSignature : vendor-specific command
+			      * this value can change, but most(all ?) manufacturers
+			      * keep the cypress default : 0x24
+			      */
 	srb->cmnd[1] = 0x24; /* bVSCBSubCommand : 0x24 for ATACB */
 
-	srb->cmnd[3] = 0xff - 1; /* features, sector count, lba low, lba med
-								lba high, device, command are valid */
+	srb->cmnd[3] = 0xff - 1; /*
+				  * features, sector count, lba low, lba med
+				  * lba high, device, command are valid
+				  */
 	srb->cmnd[4] = 1; /* TransferBlockCount : 512 */
 
 	if (save_cmnd[0] == ATA_16) {
@@ -155,8 +159,7 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 
 	usb_stor_transparent_scsi_command(srb, us);
 
-	/* if the device doesn't support ATACB
-	 */
+	/* if the device doesn't support ATACB */
 	if (srb->result == SAM_STAT_CHECK_CONDITION &&
 			memcmp(srb->sense_buffer, usb_stor_sense_invalidCDB,
 				sizeof(usb_stor_sense_invalidCDB)) == 0) {
@@ -164,7 +167,8 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 		goto end;
 	}
 
-	/* if ck_cond flags is set, and there wasn't critical error,
+	/*
+	 * if ck_cond flags is set, and there wasn't critical error,
 	 * build the special sense
 	 */
 	if ((srb->result != (DID_ERROR << 16) &&
@@ -176,11 +180,11 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 		unsigned char *desc = sb + 8;
 		int tmp_result;
 
-		/* build the command for
-		 * reading the ATA registers */
+		/* build the command for reading the ATA registers */
 		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs));
 
-		/* we use the same command as before, but we set
+		/*
+		 * we use the same command as before, but we set
 		 * the read taskfile bit, for not executing atacb command,
 		 * but reading register selected in srb->cmnd[4]
 		 */
@@ -204,10 +208,11 @@ static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us)
 		sb[2] = 0; /* ATA PASS THROUGH INFORMATION AVAILABLE */
 		sb[3] = 0x1D;
 
-		/* XXX we should generate sk, asc, ascq from status and error
+		/*
+		 * XXX we should generate sk, asc, ascq from status and error
 		 * regs
 		 * (see 11.1 Error translation ATA device error to SCSI error
-		 *  map, and ata_to_sense_error from libata.)
+		 * map, and ata_to_sense_error from libata.)
 		 */
 
 		/* Sense data is current and format is descriptor. */
@@ -258,7 +263,8 @@ static int cypress_probe(struct usb_interface *intf,
 	if (result)
 		return result;
 
-	/* Among CY7C68300 chips, the A revision does not support Cypress ATACB
+	/*
+	 * Among CY7C68300 chips, the A revision does not support Cypress ATACB
 	 * Filter out this revision from EEPROM default descriptor values
 	 */
 	device = interface_to_usbdev(intf);