Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of TTY/Serial driver updates and cleanups for
  6.9-rc1. Included in here are:

   - more tty cleanups from Jiri

   - loads of 8250 driver cleanups from Andy

   - max310x driver updates

   - samsung serial driver updates

   - uart_prepare_sysrq_char() updates for many drivers

   - platform driver remove callback void cleanups

   - stm32 driver updates

   - other small tty/serial driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  dt-bindings: serial: stm32: add power-domains property
  serial: 8250_dw: Replace ACPI device check by a quirk
  serial: Lock console when calling into driver before registration
  serial: 8250_uniphier: Switch to use uart_read_port_properties()
  serial: 8250_tegra: Switch to use uart_read_port_properties()
  serial: 8250_pxa: Switch to use uart_read_port_properties()
  serial: 8250_omap: Switch to use uart_read_port_properties()
  serial: 8250_of: Switch to use uart_read_port_properties()
  serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
  serial: 8250_ingenic: Switch to use uart_read_port_properties()
  serial: 8250_dw: Switch to use uart_read_port_properties()
  serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
  serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
  serial: port: Introduce a common helper to read properties
  serial: core: Add UPIO_UNKNOWN constant for unknown port type
  serial: core: Move struct uart_port::quirks closer to possible values
  serial: sh-sci: Call sci_serial_{in,out}() directly
  serial: core: only stop transmit when HW fifo is empty
  serial: pch: Use uart_prepare_sysrq_char().
  ...

1 files changed, 7 insertions, 13 deletions

diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index a12f737924c0b7..a2783e38a2e316 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -234,7 +234,7 @@ static int ingenic_uart_probe(struct platform_device *pdev)
 	struct ingenic_uart_data *data;
 	const struct ingenic_uart_config *cdata;
 	struct resource *regs;
-	int irq, err, line;
+	int err;
 
 	cdata = of_device_get_match_data(&pdev->dev);
 	if (!cdata) {
@@ -242,10 +242,6 @@ static int ingenic_uart_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
-
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!regs) {
 		dev_err(&pdev->dev, "no registers defined\n");
@@ -259,21 +255,19 @@ static int ingenic_uart_probe(struct platform_device *pdev)
 	spin_lock_init(&uart.port.lock);
 	uart.port.type = PORT_16550A;
 	uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE;
-	uart.port.iotype = UPIO_MEM;
 	uart.port.mapbase = regs->start;
-	uart.port.regshift = 2;
 	uart.port.serial_out = ingenic_uart_serial_out;
 	uart.port.serial_in = ingenic_uart_serial_in;
-	uart.port.irq = irq;
 	uart.port.dev = &pdev->dev;
-	uart.port.fifosize = cdata->fifosize;
 	uart.tx_loadsz = cdata->tx_loadsz;
 	uart.capabilities = UART_CAP_FIFO | UART_CAP_RTOIE;
 
-	/* Check for a fixed line number */
-	line = of_alias_get_id(pdev->dev.of_node, "serial");
-	if (line >= 0)
-		uart.port.line = line;
+	err = uart_read_port_properties(&uart.port);
+	if (err)
+		return err;
+
+	uart.port.regshift = 2;
+	uart.port.fifosize = cdata->fifosize;
 
 	uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
 					 resource_size(regs));