Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and a number of other driver
  subsystem updates for 6.9-rc1. Included in here are:

   - IIO driver updates, loads of new ones and evolution of existing ones

   - coresight driver updates

   - const cleanups for many driver subsystems

   - speakup driver additions

   - platform remove callback void cleanups

   - mei driver updates

   - mhi driver updates

   - cdx driver updates for MSI interrupt handling

   - nvmem driver updates

   - other smaller driver updates and cleanups, full details in the
    shortlog

  All of these have been in linux-next for a long time with no reported
  issue, other than a build warning for the speakup driver"

The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.

Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/

* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
  binder: remove redundant variable page_addr
  uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
  uio_pruss: UIO_MEM_DMA_COHERENT conversion
  cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
  uio: introduce UIO_MEM_DMA_COHERENT type
  cdx: add MSI support for CDX bus
  pps: use cflags-y instead of EXTRA_CFLAGS
  speakup: Add /dev/synthu device
  speakup: Fix 8bit characters from direct synth
  parport: sunbpp: Convert to platform remove callback returning void
  parport: amiga: Convert to platform remove callback returning void
  char: xillybus: Convert to platform remove callback returning void
  vmw_balloon: change maintainership
  MAINTAINERS: change the maintainer for hpilo driver
  char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
  hpet: remove hpets::hp_clocksource
  platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
  char: xilinx_hwicap: drop casting to void in dev_set_drvdata
  greybus: move is_gb_* functions out of greybus.h
  greybus: Remove usage of the deprecated ida_simple_xx() API
  ...

1 files changed, 77 insertions, 21 deletions

diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
index d9e903fbfd99ea..6994b30015bdb6 100644
--- a/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,mprls0025pa.yaml
@@ -8,25 +8,28 @@ title: Honeywell mprls0025pa pressure sensor
 
 maintainers:
   - Andreas Klinger <ak@it-klinger.de>
+  - Petre Rodan <petre.rodan@subdimension.ro>
 
 description: |
   Honeywell pressure sensor of model mprls0025pa.
 
-  This sensor has an I2C and SPI interface. Only the I2C interface is
-  implemented.
+  This sensor has an I2C and SPI interface.
 
   There are many models with different pressure ranges available. The vendor
   calls them "mpr series". All of them have the identical programming model and
   differ in the pressure range, unit and transfer function.
 
-  To support different models one need to specify the pressure range as well as
-  the transfer function. Pressure range needs to be converted from its unit to
-  pascal.
+  To support different models one need to specify its pressure triplet as well
+  as the transfer function.
+
+  For custom silicon chips not covered by the Honeywell MPR series datasheet,
+  the pressure values can be specified manually via honeywell,pmin-pascal and
+  honeywell,pmax-pascal.
+  The minimal range value stands for the minimum pressure and the maximum value
+  also for the maximum pressure with linear relation inside the range.
 
   The transfer function defines the ranges of numerical values delivered by the
-  sensor. The minimal range value stands for the minimum pressure and the
-  maximum value also for the maximum pressure with linear relation inside the
-  range.
+  sensor.
 
   Specifications about the devices can be found at:
     https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/
@@ -42,6 +45,10 @@ properties:
     maxItems: 1
 
   interrupts:
+    description:
+      Optional interrupt for indicating End-of-conversion.
+      If not present, the driver loops for a while until the received status
+      byte indicates correct measurement.
     maxItems: 1
 
   reset-gpios:
@@ -50,14 +57,6 @@ properties:
       If not present the device is not reset during the probe.
     maxItems: 1
 
-  honeywell,pmin-pascal:
-    description:
-      Minimum pressure value the sensor can measure in pascal.
-
-  honeywell,pmax-pascal:
-    description:
-      Maximum pressure value the sensor can measure in pascal.
-
   honeywell,transfer-function:
     description: |
       Transfer function which defines the range of valid values delivered by the
@@ -65,19 +64,57 @@ properties:
       1 - A, 10% to 90% of 2^24 (1677722 .. 15099494)
       2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874)
       3 - C, 20% to 80% of 2^24 (3355443 .. 13421773)
+    enum: [1, 2, 3]
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, unset and provide pmin-pascal and pmax-pascal instead.
+    enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG,
+           0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG,
+           0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG,
+           0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG]
+    $ref: /schemas/types.yaml#/definitions/string
+
+  honeywell,pmin-pascal:
+    description:
+      Minimum pressure value the sensor can measure in pascal.
+
+  honeywell,pmax-pascal:
+    description:
+      Maximum pressure value the sensor can measure in pascal.
+
+  spi-max-frequency:
+    maximum: 800000
+
   vdd-supply:
     description: provide VDD power to the sensor.
 
 required:
   - compatible
   - reg
-  - honeywell,pmin-pascal
-  - honeywell,pmax-pascal
   - honeywell,transfer-function
   - vdd-supply
 
+oneOf:
+  - required:
+      - honeywell,pressure-triplet
+  - required:
+      - honeywell,pmin-pascal
+      - honeywell,pmax-pascal
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml
+  - if:
+      required:
+        - honeywell,pressure-triplet
+    then:
+      properties:
+        honeywell,pmin-pascal: false
+        honeywell,pmax-pascal: false
+
 additionalProperties: false
 
 examples:
@@ -93,10 +130,29 @@ examples:
             reg = <0x18>;
             reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
             interrupt-parent = <&gpio3>;
-            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
-            honeywell,pmin-pascal = <0>;
-            honeywell,pmax-pascal = <172369>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0025PA";
+            honeywell,transfer-function = <1>;
+            vdd-supply = <&vcc_3v3>;
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,mprls0025pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <30 IRQ_TYPE_EDGE_RISING>;
+
+            honeywell,pressure-triplet = "0015PA";
             honeywell,transfer-function = <1>;
             vdd-supply = <&vcc_3v3>;
         };
     };
+...