diff options
| author | Volodymyr Babchuk <Volodymyr_Babchuk@epam.com> | 2024-04-12 19:03:25 +0000 |
|---|---|---|
| committer | Bjorn Andersson <andersson@kernel.org> | 2024-04-20 12:58:33 -0500 |
| commit | 819fe8c96a5172dfd960e5945e8f00f8fed32953 (patch) | |
| tree | 1e0c3b6b1df919f0e860502308ec48de7fcd41a9 | |
| parent | ecda8309098402f878c96184f29a1b7ec682d772 (diff) | |
| download | linux-819fe8c96a5172dfd960e5945e8f00f8fed32953.tar.gz | |
arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration
There are two issues with SDHC2 configuration for SA8155P-ADP,
which prevent use of SDHC2 and causes issues with ethernet:
- Card Detect pin for SHDC2 on SA8155P-ADP is connected to gpio4 of
PMM8155AU_1, not to SoC itself. SoC's gpio4 is used for DWMAC
TX. If sdhc driver probes after dwmac driver, it reconfigures
gpio4 and this breaks Ethernet MAC.
- pinctrl configuration mentions gpio96 as CD pin. It seems it was
copied from some SM8150 example, because as mentioned above,
correct CD pin is gpio4 on PMM8155AU_1.
This patch fixes both mentioned issues by providing correct pin handle
and pinctrl configuration.
Fixes: 0deb2624e2d0 ("arm64: dts: qcom: sa8155p-adp: Add support for uSD card")
Cc: stable@vger.kernel.org
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20240412190310.1647893-1-volodymyr_babchuk@epam.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 30 |
1 files changed, 13 insertions, 17 deletions
diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts index 5e4287f8c8cd1..b2cf2c988336c 100644 --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts @@ -367,6 +367,16 @@ }; }; +&pmm8155au_1_gpios { + pmm8155au_1_sdc2_cd: sdc2-cd-default-state { + pins = "gpio4"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + }; +}; + &qupv3_id_1 { status = "okay"; }; @@ -384,10 +394,10 @@ &sdhc_2 { status = "okay"; - cd-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + cd-gpios = <&pmm8155au_1_gpios 4 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_on>; - pinctrl-1 = <&sdc2_off>; + pinctrl-0 = <&sdc2_on &pmm8155au_1_sdc2_cd>; + pinctrl-1 = <&sdc2_off &pmm8155au_1_sdc2_cd>; vqmmc-supply = <&vreg_l13c_2p96>; /* IO line power */ vmmc-supply = <&vreg_l17a_2p96>; /* Card power line */ bus-width = <4>; @@ -505,13 +515,6 @@ bias-pull-up; /* pull up */ drive-strength = <16>; /* 16 MA */ }; - - sd-cd-pins { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; }; sdc2_off: sdc2-off-state { @@ -532,13 +535,6 @@ bias-pull-up; /* pull up */ drive-strength = <2>; /* 2 MA */ }; - - sd-cd-pins { - pins = "gpio96"; - function = "gpio"; - bias-pull-up; /* pull up */ - drive-strength = <2>; /* 2 MA */ - }; }; usb2phy_ac_en1_default: usb2phy-ac-en1-default-state { |