drm/omap: Filter displays mode based on bandwidth limit

If we have memory bandwidth limit configured, reject the modes which would
require more bandwidth than the limit if it is used with one full
resolution plane (most common use case).

This filtering is not providing full protection as it is possible that
application would pick smaller crtc resolution with high resolution planes
and down scaling, or can enable more smaller planes where the sum of their
bandwidth need would be higher than the limit.

This patch only allows us to filter out modes which would need more
bandwidth if they were used with one full screen plane.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

3 files changed, 45 insertions, 0 deletions

diff --git a/drivers/gpu/drm/omapdrm/omap_crtc.c b/drivers/gpu/drm/omapdrm/omap_crtc.c
index cc85c16cbc2abd..ae2e16ed3874d2 100644
--- a/drivers/gpu/drm/omapdrm/omap_crtc.c
+++ b/drivers/gpu/drm/omapdrm/omap_crtc.c
@@ -23,6 +23,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_mode.h>
 #include <drm/drm_plane_helper.h>
+#include <linux/math64.h>
 
 #include "omap_drv.h"
 
@@ -400,6 +401,41 @@ static void omap_crtc_atomic_disable(struct drm_crtc *crtc,
 	drm_crtc_vblank_off(crtc);
 }
 
+static enum drm_mode_status omap_crtc_mode_valid(struct drm_crtc *crtc,
+					const struct drm_display_mode *mode)
+{
+	struct omap_drm_private *priv = crtc->dev->dev_private;
+
+	/* Check for bandwidth limit */
+	if (priv->max_bandwidth) {
+		/*
+		 * Estimation for the bandwidth need of a given mode with one
+		 * full screen plane:
+		 * bandwidth = resolution * 32bpp * (pclk / (vtotal * htotal))
+		 *					^^ Refresh rate ^^
+		 *
+		 * The interlaced mode is taken into account by using the
+		 * pixelclock in the calculation.
+		 *
+		 * The equation is rearranged for 64bit arithmetic.
+		 */
+		uint64_t bandwidth = mode->clock * 1000;
+		unsigned int bpp = 4;
+
+		bandwidth = bandwidth * mode->hdisplay * mode->vdisplay * bpp;
+		bandwidth = div_u64(bandwidth, mode->htotal * mode->vtotal);
+
+		/*
+		 * Reject modes which would need more bandwidth if used with one
+		 * full resolution plane (most common use case).
+		 */
+		if (priv->max_bandwidth < bandwidth)
+			return MODE_BAD;
+	}
+
+	return MODE_OK;
+}
+
 static void omap_crtc_mode_set_nofb(struct drm_crtc *crtc)
 {
 	struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
@@ -621,6 +657,7 @@ static const struct drm_crtc_helper_funcs omap_crtc_helper_funcs = {
 	.atomic_flush = omap_crtc_atomic_flush,
 	.atomic_enable = omap_crtc_atomic_enable,
 	.atomic_disable = omap_crtc_atomic_disable,
+	.mode_valid = omap_crtc_mode_valid,
 };
 
 /* -----------------------------------------------------------------------------
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c
index cdf5b0601ebabe..ba3d22fae55bdd 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.c
+++ b/drivers/gpu/drm/omapdrm/omap_drv.c
@@ -593,6 +593,11 @@ static int pdev_probe(struct platform_device *pdev)
 	ddev->dev_private = priv;
 	platform_set_drvdata(pdev, ddev);
 
+	/* Get memory bandwidth limits */
+	if (priv->dispc_ops->get_memory_bandwidth_limit)
+		priv->max_bandwidth =
+				priv->dispc_ops->get_memory_bandwidth_limit();
+
 	omap_gem_init(ddev);
 
 	ret = omap_modeset_init(ddev);
diff --git a/drivers/gpu/drm/omapdrm/omap_drv.h b/drivers/gpu/drm/omapdrm/omap_drv.h
index 4bd1e9070b3184..d404e8c56b6178 100644
--- a/drivers/gpu/drm/omapdrm/omap_drv.h
+++ b/drivers/gpu/drm/omapdrm/omap_drv.h
@@ -83,6 +83,9 @@ struct omap_drm_private {
 	spinlock_t wait_lock;		/* protects the wait_list */
 	struct list_head wait_list;	/* list of omap_irq_wait */
 	uint32_t irq_mask;		/* enabled irqs in addition to wait_list */
+
+	/* memory bandwidth limit if it is needed on the platform */
+	unsigned int max_bandwidth;
 };