libperf: Fix man page typos

Fix various typos and inconsistent capitalization of CPU in the libperf
man pages.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200807193241.3904545-1-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

3 files changed, 17 insertions, 14 deletions

diff --git a/tools/lib/perf/Documentation/libperf-counting.txt b/tools/lib/perf/Documentation/libperf-counting.txt
index cae9757f49c126..8b75efcd67ceaf 100644
--- a/tools/lib/perf/Documentation/libperf-counting.txt
+++ b/tools/lib/perf/Documentation/libperf-counting.txt
@@ -7,13 +7,13 @@ libperf-counting - counting interface
 
 DESCRIPTION
 -----------
-The counting interface provides API to meassure and get count for specific perf events.
+The counting interface provides API to measure and get count for specific perf events.
 
 The following test tries to explain count on `counting.c` example.
 
 It is by no means complete guide to counting, but shows libperf basic API for counting.
 
-The `counting.c` comes with libbperf package and can be compiled and run like:
+The `counting.c` comes with libperf package and can be compiled and run like:
 
 [source,bash]
 --
@@ -26,7 +26,8 @@ count 176242, enabled 176242, run 176242
 It requires root access, because of the `PERF_COUNT_SW_CPU_CLOCK` event,
 which is available only for root.
 
-The `counting.c` example monitors two events on the current process and displays their count, in a nutshel it:
+The `counting.c` example monitors two events on the current process and displays
+their count, in a nutshell it:
 
 * creates events
 * adds them to the event list
@@ -152,7 +153,7 @@ Configure event list with the thread map and open events:
 --
 
 Both events are created as disabled (note the `disabled = 1` assignment above),
-so we need to enable the whole list explicitely (both events).
+so we need to enable the whole list explicitly (both events).
 
 From this moment events are counting and we can do our workload.
 
@@ -167,7 +168,8 @@ When we are done we disable the events list.
  79         perf_evlist__disable(evlist);
 --
 
-Now we need to get the counts from events, following code iterates throught the events list and read counts:
+Now we need to get the counts from events, following code iterates through the
+events list and read counts:
 
 [source,c]
 --
@@ -178,7 +180,7 @@ Now we need to get the counts from events, following code iterates throught the
  85         }
 --
 
-And finaly cleanup.
+And finally cleanup.
 
 We close the whole events list (both events) and remove it together with the threads map:
 
diff --git a/tools/lib/perf/Documentation/libperf-sampling.txt b/tools/lib/perf/Documentation/libperf-sampling.txt
index d71a7b4fcf5f6d..d6ca24f6ef78f4 100644
--- a/tools/lib/perf/Documentation/libperf-sampling.txt
+++ b/tools/lib/perf/Documentation/libperf-sampling.txt
@@ -8,13 +8,13 @@ libperf-sampling - sampling interface
 
 DESCRIPTION
 -----------
-The sampling interface provides API to meassure and get count for specific perf events.
+The sampling interface provides API to measure and get count for specific perf events.
 
 The following test tries to explain count on `sampling.c` example.
 
 It is by no means complete guide to sampling, but shows libperf basic API for sampling.
 
-The `sampling.c` comes with libbperf package and can be compiled and run like:
+The `sampling.c` comes with libperf package and can be compiled and run like:
 
 [source,bash]
 --
@@ -33,7 +33,8 @@ cpu   0, pid   4465, tid   4470, ip         7f84fe0ebebf, period             176
 
 It requires root access, because it uses hardware cycles event.
 
-The `sampling.c` example profiles/samples all CPUs with hardware cycles, in a nutshel it:
+The `sampling.c` example profiles/samples all CPUs with hardware cycles, in a
+nutshell it:
 
 - creates events
 - adds them to the event list
@@ -90,7 +91,7 @@ Once the setup is complete we start by defining cycles event using the `struct p
  36         };
 --
 
-Next step is to prepare cpus map.
+Next step is to prepare CPUs map.
 
 In this case we will monitor all the available CPUs:
 
@@ -152,7 +153,7 @@ Once the events list is open, we can create memory maps AKA perf ring buffers:
 --
 
 The event is created as disabled (note the `disabled = 1` assignment above),
-so we need to enable the events list explicitely.
+so we need to enable the events list explicitly.
 
 From this moment the cycles event is sampling.
 
@@ -212,7 +213,7 @@ Each sample needs to get parsed:
 106                                 cpu, pid, tid, ip, period);
 --
 
-And finaly cleanup.
+And finally cleanup.
 
 We close the whole events list (both events) and remove it together with the threads map:
 
diff --git a/tools/lib/perf/Documentation/libperf.txt b/tools/lib/perf/Documentation/libperf.txt
index 5a6bb512789d33..0c74c30ed23a1b 100644
--- a/tools/lib/perf/Documentation/libperf.txt
+++ b/tools/lib/perf/Documentation/libperf.txt
@@ -29,7 +29,7 @@ SYNOPSIS
   void libperf_init(libperf_print_fn_t fn);
 --
 
-*API to handle cpu maps:*
+*API to handle CPU maps:*
 
 [source,c]
 --
@@ -217,7 +217,7 @@ Following objects are key to the libperf interface:
 
 [horizontal]
 
-struct perf_cpu_map:: Provides a cpu list abstraction.
+struct perf_cpu_map:: Provides a CPU list abstraction.
 
 struct perf_thread_map:: Provides a thread list abstraction.