1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
|
From 5dbef2f31f2c20e44d8c679f4fcba1dbb410c047 Mon Sep 17 00:00:00 2001
From: Sasha Levin <sashal@kernel.org>
Date: Wed, 17 Apr 2024 12:37:37 +0200
Subject: net: dsa: mv88e6xx: fix supported_interfaces setup in
mv88e6250_phylink_get_caps()
From: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
[ Upstream commit a4e3899065ffa87d49dc20e8c17501edbc189692 ]
With the recent PHYLINK changes requiring supported_interfaces to be set,
MV88E6250 family switches like the 88E6020 fail to probe - cmode is
never initialized on these devices, so mv88e6250_phylink_get_caps() does
not set any supported_interfaces flags.
Instead of a cmode, on 88E6250 we have a read-only port mode value that
encodes similar information. There is no reason to bother mapping port
mode to the cmodes of other switch models; instead we introduce a
mv88e6250_setup_supported_interfaces() that is called directly from
mv88e6250_phylink_get_caps().
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240417103737.166651-1-matthias.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/dsa/mv88e6xxx/chip.c | 56 +++++++++++++++++++++++++++++---
drivers/net/dsa/mv88e6xxx/port.h | 23 ++++++++++---
2 files changed, 71 insertions(+), 8 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 7de8a9c9e4576..32416d8802ca4 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -566,13 +566,61 @@ static void mv88e6xxx_translate_cmode(u8 cmode, unsigned long *supported)
phy_interface_set_rgmii(supported);
}
-static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
- struct phylink_config *config)
+static void
+mv88e6250_setup_supported_interfaces(struct mv88e6xxx_chip *chip, int port,
+ struct phylink_config *config)
{
unsigned long *supported = config->supported_interfaces;
+ int err;
+ u16 reg;
- /* Translate the default cmode */
- mv88e6xxx_translate_cmode(chip->ports[port].cmode, supported);
+ err = mv88e6xxx_port_read(chip, port, MV88E6XXX_PORT_STS, ®);
+ if (err) {
+ dev_err(chip->dev, "p%d: failed to read port status\n", port);
+ return;
+ }
+
+ switch (reg & MV88E6250_PORT_STS_PORTMODE_MASK) {
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY:
+ __set_bit(PHY_INTERFACE_MODE_REVMII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_HALF:
+ case MV88E6250_PORT_STS_PORTMODE_MII_FULL:
+ __set_bit(PHY_INTERFACE_MODE_MII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY:
+ __set_bit(PHY_INTERFACE_MODE_REVRMII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL:
+ case MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL:
+ __set_bit(PHY_INTERFACE_MODE_RMII, supported);
+ break;
+
+ case MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII:
+ __set_bit(PHY_INTERFACE_MODE_RGMII, supported);
+ break;
+
+ default:
+ dev_err(chip->dev,
+ "p%d: invalid port mode in status register: %04x\n",
+ port, reg);
+ }
+}
+
+static void mv88e6250_phylink_get_caps(struct mv88e6xxx_chip *chip, int port,
+ struct phylink_config *config)
+{
+ if (!mv88e6xxx_phy_is_internal(chip, port))
+ mv88e6250_setup_supported_interfaces(chip, port, config);
config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100;
}
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 86deeb347cbc1..ddadeb9bfdaee 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -25,10 +25,25 @@
#define MV88E6250_PORT_STS_PORTMODE_PHY_100_HALF 0x0900
#define MV88E6250_PORT_STS_PORTMODE_PHY_10_FULL 0x0a00
#define MV88E6250_PORT_STS_PORTMODE_PHY_100_FULL 0x0b00
-#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF 0x0c00
-#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF 0x0d00
-#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL 0x0e00
-#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL 0x0f00
+/* - Modes with PHY suffix use output instead of input clock
+ * - Modes without RMII or RGMII use MII
+ * - Modes without speed do not have a fixed speed specified in the manual
+ * ("DC to x MHz" - variable clock support?)
+ */
+#define MV88E6250_PORT_STS_PORTMODE_MII_DISABLED 0x0000
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_RGMII 0x0100
+#define MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL_PHY 0x0200
+#define MV88E6250_PORT_STS_PORTMODE_MII_200_RMII_FULL_PHY 0x0400
+#define MV88E6250_PORT_STS_PORTMODE_MII_DUAL_100_RMII_FULL 0x0600
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL 0x0700
+#define MV88E6250_PORT_STS_PORTMODE_MII_HALF 0x0800
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_HALF_PHY 0x0900
+#define MV88E6250_PORT_STS_PORTMODE_MII_FULL 0x0a00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_100_RMII_FULL_PHY 0x0b00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_HALF_PHY 0x0c00
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_HALF_PHY 0x0d00
+#define MV88E6250_PORT_STS_PORTMODE_MII_10_FULL_PHY 0x0e00
+#define MV88E6250_PORT_STS_PORTMODE_MII_100_FULL_PHY 0x0f00
#define MV88E6XXX_PORT_STS_LINK 0x0800
#define MV88E6XXX_PORT_STS_DUPLEX 0x0400
#define MV88E6XXX_PORT_STS_SPEED_MASK 0x0300
--
2.43.0
|
