Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management update from Zhang Rui:
 "Specifics:

   - fix a bug in Exynos thermal driver, which overwrites the hardware
     trip point threshold when updating software trigger levels and
     results in emergency shutdown.  From: Tushar Behera.

   - add thermal sensor support for Armada 375 and 38x SoCs.  From
     Ezequiel Garcia.

   - add TMU (Thermal Management Unit) support for Exynos5260 and
     Exynos5420 SoCs.  From Naveen Krishna Chatradhi.

   - add support for the additional digital temperature sensors in the
     Intel SoCs like Bay Trail.  From: Srinivas Pandruvada.

   - a couple of cleanups and small fixes from Jingoo Han, Bartlomiej
     Zolnierkiewicz, Geert Uytterhoeven, Jacob Pan, Paul Walmsley and
     Lan,Tianyu"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (21 commits)
  thermal: spear: remove unnecessary OOM messages
  thermal: exynos: remove unnecessary OOM messages
  thermal: rcar: remove unnecessary OOM messages
  thermal: armada: Support Armada 380 SoC
  thermal: armada: Support Armada 375 SoC
  thermal: armada: Allow to specify an 'inverted readout' sensor
  thermal: armada: Pass the platform_device to init_sensor()
  thermal: armada: Add generic infrastructure to handle the sensor
  thermal: armada: Add infrastructure to support generic formulas
  thermal: armada: Rename armada_thermal_ops struct
  thermal/intel_powerclamp: add newer cpu ids
  thermal: rcar: Use pm_runtime_put() i.s.o. pm_runtime_put_sync()
  thermal: samsung: Only update available threshold limits
  Thermal/int3403: Fix thermal hysteresis unit conversion
  thermal: Intel SoC DTS thermal
  thermal: samsung: Add TMU support for Exynos5260 SoCs
  thermal: samsung: Add TMU support for Exynos5420 SoCs
  thermal: samsung: change base_common to more meaningful base_second
  thermal: samsung: replace inten_ bit fields with intclr_
  thermal: offer Samsung thermal support only when ARCH_EXYNOS is defined
  ...

15 files changed, 1015 insertions, 75 deletions

diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
index fff93d5f92dea1..4cf024929a3f4b 100644
--- a/Documentation/devicetree/bindings/thermal/armada-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -1,11 +1,21 @@
-* Marvell Armada 370/XP thermal management
+* Marvell Armada 370/375/380/XP thermal management
 
 Required properties:
 
 - compatible:	Should be set to one of the following:
 		marvell,armada370-thermal
+		marvell,armada375-thermal
+		marvell,armada375-z1-thermal
+		marvell,armada380-thermal
 		marvell,armadaxp-thermal
 
+		Note: As the name suggests, "marvell,armada375-z1-thermal"
+		applies for the SoC Z1 stepping only. On such stepping
+		some quirks need to be done and the register offset differs
+		from the one in the A0 stepping.
+		The operating system may auto-detect the SoC stepping and
+		update the compatible and register offsets at runtime.
+
 - reg:		Device's register space.
 		Two entries are expected, see the examples below.
 		The first one is required for the sensor register;
diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
index 284f5300fd8bbe..c94909215c0785 100644
--- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt
@@ -6,16 +6,35 @@
 	       "samsung,exynos4412-tmu"
 	       "samsung,exynos4210-tmu"
 	       "samsung,exynos5250-tmu"
+	       "samsung,exynos5260-tmu"
+	       "samsung,exynos5420-tmu" for TMU channel 0, 1 on Exynos5420
+	       "samsung,exynos5420-tmu-ext-triminfo" for TMU channels 2, 3 and 4
+			Exynos5420 (Must pass triminfo base and triminfo clock)
 	       "samsung,exynos5440-tmu"
 - interrupt-parent : The phandle for the interrupt controller
 - reg : Address range of the thermal registers. For soc's which has multiple
 	instances of TMU and some registers are shared across all TMU's like
 	interrupt related then 2 set of register has to supplied. First set
-	belongs	to each instance of TMU and second set belongs to common TMU
-	registers.
+	belongs	to register set of TMU instance and second set belongs to
+	registers shared with the TMU instance.
+
+  NOTE: On Exynos5420, the TRIMINFO register is misplaced for TMU
+	channels 2, 3 and 4
+	Use "samsung,exynos5420-tmu-ext-triminfo" in cases, there is a misplaced
+	register, also provide clock to access that base.
+
+	TRIMINFO at 0x1006c000 contains data for TMU channel 3
+	TRIMINFO at 0x100a0000 contains data for TMU channel 4
+	TRIMINFO at 0x10068000 contains data for TMU channel 2
+
 - interrupts : Should contain interrupt for thermal system
-- clocks : The main clock for TMU device
+- clocks : The main clocks for TMU device
+	-- 1. operational clock for TMU channel
+	-- 2. optional clock to access the shared registers of TMU channel
 - clock-names : Thermal system clock name
+	-- "tmu_apbif" operational clock for current TMU channel
+	-- "tmu_triminfo_apbif" clock to access the shared triminfo register
+		for current TMU channel
 - vtmu-supply: This entry is optional and provides the regulator node supplying
 		voltage to TMU. If needed this entry can be placed inside
 		board/platform specific dts file.
@@ -43,6 +62,31 @@ Example 2):
 		clock-names = "tmu_apbif";
 	};
 
+Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")
+	tmu_cpu2: tmu@10068000 {
+		compatible = "samsung,exynos5420-tmu-ext-triminfo";
+		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+		interrupts = <0 184 0>;
+		clocks = <&clock 318>, <&clock 318>;
+		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+	};
+
+	tmu_cpu3: tmu@1006c000 {
+		compatible = "samsung,exynos5420-tmu-ext-triminfo";
+		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+		interrupts = <0 185 0>;
+		clocks = <&clock 318>, <&clock 319>;
+		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+	};
+
+	tmu_gpu: tmu@100a0000 {
+		compatible = "samsung,exynos5420-tmu-ext-triminfo";
+		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+		interrupts = <0 215 0>;
+		clocks = <&clock 319>, <&clock 318>;
+		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+	};
+
 Note: For multi-instance tmu each instance should have an alias correctly
 numbered in "aliases" node.
 
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 2d51912a6e408a..f9a13867cb70df 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -222,12 +222,24 @@ config ACPI_INT3403_THERMAL
 	  the Intel Thermal Daemon can use this information to allow the user
 	  to select his laptop to run without turning on the fans.
 
+config INTEL_SOC_DTS_THERMAL
+	tristate "Intel SoCs DTS thermal driver"
+	depends on X86 && IOSF_MBI
+	help
+	  Enable this to register Intel SoCs (e.g. Bay Trail) platform digital
+	  temperature sensor (DTS). These SoCs have two additional DTSs in
+	  addition to DTSs on CPU cores. Each DTS will be registered as a
+	  thermal zone. There are two trip points. One of the trip point can
+	  be set by user mode programs to get notifications via Linux thermal
+	  notification methods.The other trip is a critical trip point, which
+	  was set by the driver based on the TJ MAX temperature.
+
 menu "Texas Instruments thermal drivers"
 source "drivers/thermal/ti-soc-thermal/Kconfig"
 endmenu
 
 menu "Samsung thermal drivers"
-depends on PLAT_SAMSUNG
+depends on ARCH_EXYNOS
 source "drivers/thermal/samsung/Kconfig"
 endmenu
 
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 54e4ec9eb5df2b..de0636a57a6470 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -29,5 +29,6 @@ obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
 obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
 obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
 obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
+obj-$(CONFIG_INTEL_SOC_DTS_THERMAL)	+= intel_soc_dts_thermal.o
 obj-$(CONFIG_TI_SOC_THERMAL)	+= ti-soc-thermal/
 obj-$(CONFIG_ACPI_INT3403_THERMAL)	+= int3403_thermal.o
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index 5e53212b984fd1..9d1420acb391b0 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -24,10 +24,7 @@
 #include <linux/of_device.h>
 #include <linux/thermal.h>
 
-#define THERMAL_VALID_OFFSET		9
 #define THERMAL_VALID_MASK		0x1
-#define THERMAL_TEMP_OFFSET		10
-#define THERMAL_TEMP_MASK		0x1ff
 
 /* Thermal Manager Control and Status Register */
 #define PMU_TDC0_SW_RST_MASK		(0x1 << 1)
@@ -38,24 +35,47 @@
 #define PMU_TDC0_OTF_CAL_MASK		(0x1 << 30)
 #define PMU_TDC0_START_CAL_MASK		(0x1 << 25)
 
-struct armada_thermal_ops;
+#define A375_Z1_CAL_RESET_LSB		0x8011e214
+#define A375_Z1_CAL_RESET_MSB		0x30a88019
+#define A375_Z1_WORKAROUND_BIT		BIT(9)
+
+#define A375_UNIT_CONTROL_SHIFT		27
+#define A375_UNIT_CONTROL_MASK		0x7
+#define A375_READOUT_INVERT		BIT(15)
+#define A375_HW_RESETn			BIT(8)
+#define A380_HW_RESET			BIT(8)
+
+struct armada_thermal_data;
 
 /* Marvell EBU Thermal Sensor Dev Structure */
 struct armada_thermal_priv {
 	void __iomem *sensor;
 	void __iomem *control;
-	struct armada_thermal_ops *ops;
+	struct armada_thermal_data *data;
 };
 
-struct armada_thermal_ops {
+struct armada_thermal_data {
 	/* Initialize the sensor */
-	void (*init_sensor)(struct armada_thermal_priv *);
+	void (*init_sensor)(struct platform_device *pdev,
+			    struct armada_thermal_priv *);
 
 	/* Test for a valid sensor value (optional) */
 	bool (*is_valid)(struct armada_thermal_priv *);
+
+	/* Formula coeficients: temp = (b + m * reg) / div */
+	unsigned long coef_b;
+	unsigned long coef_m;
+	unsigned long coef_div;
+	bool inverted;
+
+	/* Register shift and mask to access the sensor temperature */
+	unsigned int temp_shift;
+	unsigned int temp_mask;
+	unsigned int is_valid_shift;
 };
 
-static void armadaxp_init_sensor(struct armada_thermal_priv *priv)
+static void armadaxp_init_sensor(struct platform_device *pdev,
+				 struct armada_thermal_priv *priv)
 {
 	unsigned long reg;
 
@@ -80,7 +100,8 @@ static void armadaxp_init_sensor(struct armada_thermal_priv *priv)
 	writel(reg, priv->sensor);
 }
 
-static void armada370_init_sensor(struct armada_thermal_priv *priv)
+static void armada370_init_sensor(struct platform_device *pdev,
+				  struct armada_thermal_priv *priv)
 {
 	unsigned long reg;
 
@@ -99,11 +120,54 @@ static void armada370_init_sensor(struct armada_thermal_priv *priv)
 	mdelay(10);
 }
 
+static void armada375_init_sensor(struct platform_device *pdev,
+				  struct armada_thermal_priv *priv)
+{
+	unsigned long reg;
+	bool quirk_needed =
+		!!of_device_is_compatible(pdev->dev.of_node,
+					  "marvell,armada375-z1-thermal");
+
+	if (quirk_needed) {
+		/* Ensure these registers have the default (reset) values */
+		writel(A375_Z1_CAL_RESET_LSB, priv->control);
+		writel(A375_Z1_CAL_RESET_MSB, priv->control + 0x4);
+	}
+
+	reg = readl(priv->control + 4);
+	reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT);
+	reg &= ~A375_READOUT_INVERT;
+	reg &= ~A375_HW_RESETn;
+
+	if (quirk_needed)
+		reg |= A375_Z1_WORKAROUND_BIT;
+
+	writel(reg, priv->control + 4);
+	mdelay(20);
+
+	reg |= A375_HW_RESETn;
+	writel(reg, priv->control + 4);
+	mdelay(50);
+}
+
+static void armada380_init_sensor(struct platform_device *pdev,
+				  struct armada_thermal_priv *priv)
+{
+	unsigned long reg = readl_relaxed(priv->control);
+
+	/* Reset hardware once */
+	if (!(reg & A380_HW_RESET)) {
+		reg |= A380_HW_RESET;
+		writel(reg, priv->control);
+		mdelay(10);
+	}
+}
+
 static bool armada_is_valid(struct armada_thermal_priv *priv)
 {
 	unsigned long reg = readl_relaxed(priv->sensor);
 
-	return (reg >> THERMAL_VALID_OFFSET) & THERMAL_VALID_MASK;
+	return (reg >> priv->data->is_valid_shift) & THERMAL_VALID_MASK;
 }
 
 static int armada_get_temp(struct thermal_zone_device *thermal,
@@ -111,17 +175,27 @@ static int armada_get_temp(struct thermal_zone_device *thermal,
 {
 	struct armada_thermal_priv *priv = thermal->devdata;
 	unsigned long reg;
+	unsigned long m, b, div;
 
 	/* Valid check */
-	if (priv->ops->is_valid && !priv->ops->is_valid(priv)) {
+	if (priv->data->is_valid && !priv->data->is_valid(priv)) {
 		dev_err(&thermal->device,
 			"Temperature sensor reading not valid\n");
 		return -EIO;
 	}
 
 	reg = readl_relaxed(priv->sensor);
-	reg = (reg >> THERMAL_TEMP_OFFSET) & THERMAL_TEMP_MASK;
-	*temp = (3153000000UL - (10000000UL*reg)) / 13825;
+	reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask;
+
+	/* Get formula coeficients */
+	b = priv->data->coef_b;
+	m = priv->data->coef_m;
+	div = priv->data->coef_div;
+
+	if (priv->data->inverted)
+		*temp = ((m * reg) - b) / div;
+	else
+		*temp = (b - (m * reg)) / div;
 	return 0;
 }
 
@@ -129,23 +203,69 @@ static struct thermal_zone_device_ops ops = {
 	.get_temp = armada_get_temp,
 };
 
-static const struct armada_thermal_ops armadaxp_ops = {
+static const struct armada_thermal_data armadaxp_data = {
 	.init_sensor = armadaxp_init_sensor,
+	.temp_shift = 10,
+	.temp_mask = 0x1ff,
+	.coef_b = 3153000000UL,
+	.coef_m = 10000000UL,
+	.coef_div = 13825,
 };
 
-static const struct armada_thermal_ops armada370_ops = {
+static const struct armada_thermal_data armada370_data = {
 	.is_valid = armada_is_valid,
 	.init_sensor = armada370_init_sensor,
+	.is_valid_shift = 9,
+	.temp_shift = 10,
+	.temp_mask = 0x1ff,
+	.coef_b = 3153000000UL,
+	.coef_m = 10000000UL,
+	.coef_div = 13825,
+};
+
+static const struct armada_thermal_data armada375_data = {
+	.is_valid = armada_is_valid,
+	.init_sensor = armada375_init_sensor,
+	.is_valid_shift = 10,
+	.temp_shift = 0,
+	.temp_mask = 0x1ff,
+	.coef_b = 3171900000UL,
+	.coef_m = 10000000UL,
+	.coef_div = 13616,
+};
+
+static const struct armada_thermal_data armada380_data = {
+	.is_valid = armada_is_valid,
+	.init_sensor = armada380_init_sensor,
+	.is_valid_shift = 10,
+	.temp_shift = 0,
+	.temp_mask = 0x3ff,
+	.coef_b = 1169498786UL,
+	.coef_m = 2000000UL,
+	.coef_div = 4289,
+	.inverted = true,
 };
 
 static const struct of_device_id armada_thermal_id_table[] = {
 	{
 		.compatible = "marvell,armadaxp-thermal",
-		.data       = &armadaxp_ops,
+		.data       = &armadaxp_data,
 	},
 	{
 		.compatible = "marvell,armada370-thermal",
-		.data       = &armada370_ops,
+		.data       = &armada370_data,
+	},
+	{
+		.compatible = "marvell,armada375-thermal",
+		.data       = &armada375_data,
+	},
+	{
+		.compatible = "marvell,armada375-z1-thermal",
+		.data       = &armada375_data,
+	},
+	{
+		.compatible = "marvell,armada380-thermal",
+		.data       = &armada380_data,
 	},
 	{
 		/* sentinel */
@@ -178,8 +298,8 @@ static int armada_thermal_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->control))
 		return PTR_ERR(priv->control);
 
-	priv->ops = (struct armada_thermal_ops *)match->data;
-	priv->ops->init_sensor(priv);
+	priv->data = (struct armada_thermal_data *)match->data;
+	priv->data->init_sensor(pdev, priv);
 
 	thermal = thermal_zone_device_register("armada_thermal", 0, 0,
 					       priv, &ops, NULL, 0, 0);
diff --git a/drivers/thermal/int3403_thermal.c b/drivers/thermal/int3403_thermal.c
index 1301681d9a7792..e93f0253f6ed20 100644
--- a/drivers/thermal/int3403_thermal.c
+++ b/drivers/thermal/int3403_thermal.c
@@ -62,7 +62,13 @@ static int sys_get_trip_hyst(struct thermal_zone_device *tzone,
 	if (ACPI_FAILURE(status))
 		return -EIO;
 
-	*temp = DECI_KELVIN_TO_MILLI_CELSIUS(hyst, KELVIN_OFFSET);
+	/*
+	 * Thermal hysteresis represents a temperature difference.
+	 * Kelvin and Celsius have same degree size. So the
+	 * conversion here between tenths of degree Kelvin unit
+	 * and Milli-Celsius unit is just to multiply 100.
+	 */
+	*temp = hyst * 100;
 
 	return 0;
 }
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index a084325f13861c..95cb7fc20e1780 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -681,8 +681,10 @@ static const struct x86_cpu_id intel_powerclamp_ids[] = {
 	{ X86_VENDOR_INTEL, 6, 0x2d},
 	{ X86_VENDOR_INTEL, 6, 0x2e},
 	{ X86_VENDOR_INTEL, 6, 0x2f},
+	{ X86_VENDOR_INTEL, 6, 0x37},
 	{ X86_VENDOR_INTEL, 6, 0x3a},
 	{ X86_VENDOR_INTEL, 6, 0x3c},
+	{ X86_VENDOR_INTEL, 6, 0x3d},
 	{ X86_VENDOR_INTEL, 6, 0x3e},
 	{ X86_VENDOR_INTEL, 6, 0x3f},
 	{ X86_VENDOR_INTEL, 6, 0x45},
diff --git a/drivers/thermal/intel_soc_dts_thermal.c b/drivers/thermal/intel_soc_dts_thermal.c
new file mode 100644
index 00000000000000..a6a0a18ec0aa98
--- /dev/null
+++ b/drivers/thermal/intel_soc_dts_thermal.c
@@ -0,0 +1,479 @@
+/*
+ * intel_soc_dts_thermal.c
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/thermal.h>
+#include <asm/cpu_device_id.h>
+#include <asm/iosf_mbi.h>
+
+#define SOC_DTS_OFFSET_ENABLE	0xB0
+#define SOC_DTS_OFFSET_TEMP	0xB1
+
+#define SOC_DTS_OFFSET_PTPS	0xB2
+#define SOC_DTS_OFFSET_PTTS	0xB3
+#define SOC_DTS_OFFSET_PTTSS	0xB4
+#define SOC_DTS_OFFSET_PTMC	0x80
+#define SOC_DTS_TE_AUX0		0xB5
+#define SOC_DTS_TE_AUX1		0xB6
+
+#define SOC_DTS_AUX0_ENABLE_BIT		BIT(0)
+#define SOC_DTS_AUX1_ENABLE_BIT		BIT(1)
+#define SOC_DTS_CPU_MODULE0_ENABLE_BIT	BIT(16)
+#define SOC_DTS_CPU_MODULE1_ENABLE_BIT	BIT(17)
+#define SOC_DTS_TE_SCI_ENABLE		BIT(9)
+#define SOC_DTS_TE_SMI_ENABLE		BIT(10)
+#define SOC_DTS_TE_MSI_ENABLE		BIT(11)
+#define SOC_DTS_TE_APICA_ENABLE		BIT(14)
+#define SOC_DTS_PTMC_APIC_DEASSERT_BIT	BIT(4)
+
+/* DTS encoding for TJ MAX temperature */
+#define SOC_DTS_TJMAX_ENCODING	0x7F
+
+/* IRQ 86 is a fixed APIC interrupt for BYT DTS Aux threshold notifications */
+#define BYT_SOC_DTS_APIC_IRQ	86
+
+/* Only 2 out of 4 is allowed for OSPM */
+#define SOC_MAX_DTS_TRIPS	2
+
+/* Mask for two trips in status bits */
+#define SOC_DTS_TRIP_MASK	0x03
+
+/* DTS0 and DTS 1 */
+#define SOC_MAX_DTS_SENSORS	2
+
+#define CRITICAL_OFFSET_FROM_TJ_MAX	5000
+
+struct soc_sensor_entry {
+	int id;
+	u32 tj_max;
+	u32 temp_mask;
+	u32 temp_shift;
+	u32 store_status;
+	struct thermal_zone_device *tzone;
+};
+
+static struct soc_sensor_entry *soc_dts[SOC_MAX_DTS_SENSORS];
+
+static int crit_offset = CRITICAL_OFFSET_FROM_TJ_MAX;
+module_param(crit_offset, int, 0644);
+MODULE_PARM_DESC(crit_offset,
+	"Critical Temperature offset from tj max in millidegree Celsius.");
+
+static DEFINE_MUTEX(aux_update_mutex);
+static spinlock_t intr_notify_lock;
+static int soc_dts_thres_irq;
+
+static int get_tj_max(u32 *tj_max)
+{
+	u32 eax, edx;
+	u32 val;
+	int err;
+
+	err = rdmsr_safe(MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
+	if (err)
+		goto err_ret;
+	else {
+		val = (eax >> 16) & 0xff;
+		if (val)
+			*tj_max = val * 1000;
+		else {
+			err = -EINVAL;
+			goto err_ret;
+		}
+	}
+
+	return 0;
+err_ret:
+	*tj_max = 0;
+
+	return err;
+}
+
+static int sys_get_trip_temp(struct thermal_zone_device *tzd,
+					int trip, unsigned long *temp)
+{
+	int status;
+	u32 out;
+	struct soc_sensor_entry *aux_entry;
+
+	aux_entry = tzd->devdata;
+
+	if (!trip) {
+		/* Just return the critical temp */
+		*temp = aux_entry->tj_max - crit_offset;
+		return 0;
+	}
+
+	mutex_lock(&aux_update_mutex);
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+					SOC_DTS_OFFSET_PTPS, &out);
+	mutex_unlock(&aux_update_mutex);
+	if (status)
+		return status;
+
+	out = (out >> (trip * 8)) & SOC_DTS_TJMAX_ENCODING;
+
+	if (!out)
+		*temp = 0;
+	else
+		*temp = aux_entry->tj_max - out * 1000;
+
+	return 0;
+}
+
+static int update_trip_temp(struct soc_sensor_entry *aux_entry,
+				int thres_index, unsigned long temp)
+{
+	int status;
+	u32 temp_out;
+	u32 out;
+	u32 store_ptps;
+	u32 store_ptmc;
+	u32 store_te_out;
+	u32 te_out;
+
+	u32 int_enable_bit = SOC_DTS_TE_APICA_ENABLE |
+						SOC_DTS_TE_MSI_ENABLE;
+
+	temp_out = (aux_entry->tj_max - temp) / 1000;
+
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+				SOC_DTS_OFFSET_PTPS, &store_ptps);
+	if (status)
+		return status;
+
+	out = (store_ptps & ~(0xFF << (thres_index * 8)));
+	out |= (temp_out & 0xFF) << (thres_index * 8);
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+				SOC_DTS_OFFSET_PTPS, out);
+	if (status)
+		return status;
+	pr_debug("update_trip_temp PTPS = %x\n", out);
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+					SOC_DTS_OFFSET_PTMC, &out);
+	if (status)
+		goto err_restore_ptps;
+
+	store_ptmc = out;
+
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+					SOC_DTS_TE_AUX0 + thres_index,
+					&te_out);
+	if (status)
+		goto err_restore_ptmc;
+
+	store_te_out = te_out;
+
+	/* Enable for CPU module 0 and module 1 */
+	out |= (SOC_DTS_CPU_MODULE0_ENABLE_BIT |
+					SOC_DTS_CPU_MODULE1_ENABLE_BIT);
+	if (temp) {
+		if (thres_index)
+			out |= SOC_DTS_AUX1_ENABLE_BIT;
+		else
+			out |= SOC_DTS_AUX0_ENABLE_BIT;
+		te_out |= int_enable_bit;
+	} else {
+		if (thres_index)
+			out &= ~SOC_DTS_AUX1_ENABLE_BIT;
+		else
+			out &= ~SOC_DTS_AUX0_ENABLE_BIT;
+		te_out &= ~int_enable_bit;
+	}
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+					SOC_DTS_OFFSET_PTMC, out);
+	if (status)
+		goto err_restore_te_out;
+
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+					SOC_DTS_TE_AUX0 + thres_index,
+					te_out);
+	if (status)
+		goto err_restore_te_out;
+
+	return 0;
+
+err_restore_te_out:
+	iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+				SOC_DTS_OFFSET_PTMC, store_te_out);
+err_restore_ptmc:
+	iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+				SOC_DTS_OFFSET_PTMC, store_ptmc);
+err_restore_ptps:
+	iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+				SOC_DTS_OFFSET_PTPS, store_ptps);
+	/* Nothing we can do if restore fails */
+
+	return status;
+}
+
+static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
+							unsigned long temp)
+{
+	struct soc_sensor_entry *aux_entry = tzd->devdata;
+	int status;
+
+	if (temp > (aux_entry->tj_max - crit_offset))
+		return -EINVAL;
+
+	mutex_lock(&aux_update_mutex);
+	status = update_trip_temp(tzd->devdata, trip, temp);
+	mutex_unlock(&aux_update_mutex);
+
+	return status;
+}
+
+static int sys_get_trip_type(struct thermal_zone_device *thermal,
+		int trip, enum thermal_trip_type *type)
+{
+	if (trip)
+		*type = THERMAL_TRIP_PASSIVE;
+	else
+		*type = THERMAL_TRIP_CRITICAL;
+
+	return 0;
+}
+
+static int sys_get_curr_temp(struct thermal_zone_device *tzd,
+						unsigned long *temp)
+{
+	int status;
+	u32 out;
+	struct soc_sensor_entry *aux_entry;
+
+	aux_entry = tzd->devdata;
+
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+					SOC_DTS_OFFSET_TEMP, &out);
+	if (status)
+		return status;
+
+	out = (out & aux_entry->temp_mask) >> aux_entry->temp_shift;
+	out -= SOC_DTS_TJMAX_ENCODING;
+	*temp = aux_entry->tj_max - out * 1000;
+
+	return 0;
+}
+
+static struct thermal_zone_device_ops tzone_ops = {
+	.get_temp = sys_get_curr_temp,
+	.get_trip_temp = sys_get_trip_temp,
+	.get_trip_type = sys_get_trip_type,
+	.set_trip_temp = sys_set_trip_temp,
+};
+
+static void free_soc_dts(struct soc_sensor_entry *aux_entry)
+{
+	if (aux_entry) {
+		iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+			SOC_DTS_OFFSET_ENABLE, aux_entry->store_status);
+		thermal_zone_device_unregister(aux_entry->tzone);
+		kfree(aux_entry);
+	}
+}
+
+static int soc_dts_enable(int id)
+{
+	u32 out;
+	int ret;
+
+	ret = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+					SOC_DTS_OFFSET_ENABLE, &out);
+	if (ret)
+		return ret;
+
+	if (!(out & BIT(id))) {
+		out |= BIT(id);
+		ret = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+					SOC_DTS_OFFSET_ENABLE, out);
+		if (ret)
+			return ret;
+	}
+
+	return ret;
+}
+
+static struct soc_sensor_entry *alloc_soc_dts(int id, u32 tj_max)
+{
+	struct soc_sensor_entry *aux_entry;
+	char name[10];
+	int err;
+
+	aux_entry = kzalloc(sizeof(*aux_entry), GFP_KERNEL);
+	if (!aux_entry) {
+		err = -ENOMEM;
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* Store status to restor on exit */
+	err = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+					SOC_DTS_OFFSET_ENABLE,
+					&aux_entry->store_status);
+	if (err)
+		goto err_ret;
+
+	aux_entry->id = id;
+	aux_entry->tj_max = tj_max;
+	aux_entry->temp_mask = 0x00FF << (id * 8);
+	aux_entry->temp_shift = id * 8;
+	snprintf(name, sizeof(name), "soc_dts%d", id);
+	aux_entry->tzone = thermal_zone_device_register(name,
+			SOC_MAX_DTS_TRIPS,
+			0x02,
+			aux_entry, &tzone_ops, NULL, 0, 0);
+	if (IS_ERR(aux_entry->tzone)) {
+		err = PTR_ERR(aux_entry->tzone);
+		goto err_ret;
+	}
+
+	err = soc_dts_enable(id);
+	if (err)
+		goto err_aux_status;
+
+	return aux_entry;
+
+err_aux_status:
+	thermal_zone_device_unregister(aux_entry->tzone);
+err_ret:
+	kfree(aux_entry);
+	return ERR_PTR(err);
+}
+
+static void proc_thermal_interrupt(void)
+{
+	u32 sticky_out;
+	int status;
+	u32 ptmc_out;
+
+	/* Clear APIC interrupt */
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+				SOC_DTS_OFFSET_PTMC, &ptmc_out);
+
+	ptmc_out |= SOC_DTS_PTMC_APIC_DEASSERT_BIT;
+	status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+					SOC_DTS_OFFSET_PTMC, ptmc_out);
+
+	/* Read status here */
+	status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
+					SOC_DTS_OFFSET_PTTSS, &sticky_out);
+	pr_debug("status %d PTTSS %x\n", status, sticky_out);
+	if (sticky_out & SOC_DTS_TRIP_MASK) {
+		int i;
+		/* reset sticky bit */
+		status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
+					SOC_DTS_OFFSET_PTTSS, sticky_out);
+		for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+			pr_debug("TZD update for zone %d\n", i);
+			thermal_zone_device_update(soc_dts[i]->tzone);
+		}
+	}
+
+}
+
+static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&intr_notify_lock, flags);
+	proc_thermal_interrupt();
+	spin_unlock_irqrestore(&intr_notify_lock, flags);
+	pr_debug("proc_thermal_interrupt\n");
+
+	return IRQ_HANDLED;
+}
+
+static const struct x86_cpu_id soc_thermal_ids[] = {
+	{ X86_VENDOR_INTEL, X86_FAMILY_ANY, 0x37, 0, BYT_SOC_DTS_APIC_IRQ},
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, soc_thermal_ids);
+
+static int __init intel_soc_thermal_init(void)
+{
+	u32 tj_max;
+	int err = 0;
+	int i;
+	const struct x86_cpu_id *match_cpu;
+
+	match_cpu = x86_match_cpu(soc_thermal_ids);
+	if (!match_cpu)
+		return -ENODEV;
+
+	if (get_tj_max(&tj_max))
+		return -EINVAL;
+
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+		soc_dts[i] = alloc_soc_dts(i, tj_max);
+		if (IS_ERR(soc_dts[i])) {
+			err = PTR_ERR(soc_dts[i]);
+			goto err_free;
+		}
+	}
+
+	spin_lock_init(&intr_notify_lock);
+
+	soc_dts_thres_irq = (int)match_cpu->driver_data;
+
+	err = request_threaded_irq(soc_dts_thres_irq, NULL,
+					soc_irq_thread_fn,
+					IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					"soc_dts", soc_dts);
+	if (err) {
+		pr_err("request_threaded_irq ret %d\n", err);
+		goto err_free;
+	}
+
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
+		err = update_trip_temp(soc_dts[i], 0, tj_max - crit_offset);
+		if (err)
+			goto err_trip_temp;
+	}
+
+	return 0;
+
+err_trip_temp:
+	i = SOC_MAX_DTS_SENSORS;
+	free_irq(soc_dts_thres_irq, soc_dts);
+err_free:
+	while (--i >= 0)
+		free_soc_dts(soc_dts[i]);
+
+	return err;
+}
+
+static void __exit intel_soc_thermal_exit(void)
+{
+	int i;
+
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i)
+		update_trip_temp(soc_dts[i], 0, 0);
+
+	free_irq(soc_dts_thres_irq, soc_dts);
+
+	for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i)
+		free_soc_dts(soc_dts[i]);
+
+}
+
+module_init(intel_soc_thermal_init)
+module_exit(intel_soc_thermal_exit)
+
+MODULE_DESCRIPTION("Intel SoC DTS Thermal Driver");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 5a37940b02c99d..8803e693fe6868 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -374,10 +374,8 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	int idle = IDLE_INTERVAL;
 
 	common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
-	if (!common) {
-		dev_err(dev, "Could not allocate common\n");
+	if (!common)
 		return -ENOMEM;
-	}
 
 	INIT_LIST_HEAD(&common->head);
 	spin_lock_init(&common->lock);
@@ -423,7 +421,6 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 
 		priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 		if (!priv) {
-			dev_err(dev, "Could not allocate priv\n");
 			ret = -ENOMEM;
 			goto error_unregister;
 		}
@@ -470,7 +467,7 @@ error_unregister:
 			rcar_thermal_irq_disable(priv);
 	}
 
-	pm_runtime_put_sync(dev);
+	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
 
 	return ret;
@@ -488,7 +485,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)
 			rcar_thermal_irq_disable(priv);
 	}
 
-	pm_runtime_put_sync(dev);
+	pm_runtime_put(dev);
 	pm_runtime_disable(dev);
 
 	return 0;
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 0d96a510389f41..d7ca9f49c9cb22 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -41,12 +41,13 @@
  * @id: identifier of the one instance of the TMU controller.
  * @pdata: pointer to the tmu platform/configuration data
  * @base: base address of the single instance of the TMU controller.
- * @base_common: base address of the common registers of the TMU controller.
+ * @base_second: base address of the common registers of the TMU controller.
  * @irq: irq number of the TMU controller.
  * @soc: id of the SOC type.
  * @irq_work: pointer to the irq work structure.
  * @lock: lock to implement synchronization.
  * @clk: pointer to the clock structure.
+ * @clk_sec: pointer to the clock structure for accessing the base_second.
  * @temp_error1: fused value of the first point trim.
  * @temp_error2: fused value of the second point trim.
  * @regulator: pointer to the TMU regulator structure.
@@ -56,12 +57,12 @@ struct exynos_tmu_data {
 	int id;
 	struct exynos_tmu_platform_data *pdata;
 	void __iomem *base;
-	void __iomem *base_common;
+	void __iomem *base_second;
 	int irq;
 	enum soc_type soc;
 	struct work_struct irq_work;
 	struct mutex lock;
-	struct clk *clk;
+	struct clk *clk, *clk_sec;
 	u8 temp_error1, temp_error2;
 	struct regulator *regulator;
 	struct thermal_sensor_conf *reg_conf;
@@ -152,6 +153,8 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 
 	mutex_lock(&data->lock);
 	clk_enable(data->clk);
+	if (!IS_ERR(data->clk_sec))
+		clk_enable(data->clk_sec);
 
 	if (TMU_SUPPORTS(pdata, READY_STATUS)) {
 		status = readb(data->base + reg->tmu_status);
@@ -186,7 +189,12 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
 			EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
 		}
 	} else {
-		trim_info = readl(data->base + reg->triminfo_data);
+		/* On exynos5420 the triminfo register is in the shared space */
+		if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
+			trim_info = readl(data->base_second +
+							reg->triminfo_data);
+		else
+			trim_info = readl(data->base + reg->triminfo_data);
 	}
 	data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
 	data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
@@ -225,6 +233,8 @@ skip_calib_data:
 			trigger_levs++;
 	}
 
+	rising_threshold = readl(data->base + reg->threshold_th0);
+
 	if (data->soc == SOC_ARCH_EXYNOS4210) {
 		/* Write temperature code for threshold */
 		threshold_code = temp_to_code(data, pdata->threshold);
@@ -238,7 +248,7 @@ skip_calib_data:
 			writeb(pdata->trigger_levels[i], data->base +
 			reg->threshold_th0 + i * sizeof(reg->threshold_th0));
 
-		writel(reg->inten_rise_mask, data->base + reg->tmu_intclear);
+		writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
 	} else {
 		/* Write temperature code for rising and falling threshold */
 		for (i = 0;
@@ -249,6 +259,7 @@ skip_calib_data:
 				ret = threshold_code;
 				goto out;
 			}
+			rising_threshold &= ~(0xff << 8 * i);
 			rising_threshold |= threshold_code << 8 * i;
 			if (pdata->threshold_falling) {
 				threshold_code = temp_to_code(data,
@@ -265,8 +276,8 @@ skip_calib_data:
 		writel(falling_threshold,
 				data->base + reg->threshold_th1);
 
-		writel((reg->inten_rise_mask << reg->inten_rise_shift) |
-			(reg->inten_fall_mask << reg->inten_fall_shift),
+		writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
+			(reg->intclr_fall_mask << reg->intclr_fall_shift),
 				data->base + reg->tmu_intclear);
 
 		/* if last threshold limit is also present */
@@ -281,6 +292,7 @@ skip_calib_data:
 			}
 			if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
 				/* 1-4 level to be assigned in th0 reg */
+				rising_threshold &= ~(0xff << 8 * i);
 				rising_threshold |= threshold_code << 8 * i;
 				writel(rising_threshold,
 					data->base + reg->threshold_th0);
@@ -298,10 +310,12 @@ skip_calib_data:
 	}
 	/*Clear the PMIN in the common TMU register*/
 	if (reg->tmu_pmin && !data->id)
-		writel(0, data->base_common + reg->tmu_pmin);
+		writel(0, data->base_second + reg->tmu_pmin);
 out:
 	clk_disable(data->clk);
 	mutex_unlock(&data->lock);
+	if (!IS_ERR(data->clk_sec))
+		clk_disable(data->clk_sec);
 
 	return ret;
 }
@@ -453,12 +467,16 @@ static void exynos_tmu_work(struct work_struct *work)
 	const struct exynos_tmu_registers *reg = pdata->registers;
 	unsigned int val_irq, val_type;
 
+	if (!IS_ERR(data->clk_sec))
+		clk_enable(data->clk_sec);
 	/* Find which sensor generated this interrupt */
 	if (reg->tmu_irqstatus) {
-		val_type = readl(data->base_common + reg->tmu_irqstatus);
+		val_type = readl(data->base_second + reg->tmu_irqstatus);
 		if (!((val_type >> data->id) & 0x1))
 			goto out;
 	}
+	if (!IS_ERR(data->clk_sec))
+		clk_disable(data->clk_sec);
 
 	exynos_report_trigger(data->reg_conf);
 	mutex_lock(&data->lock);
@@ -499,6 +517,18 @@ static const struct of_device_id exynos_tmu_match[] = {
 		.data = (void *)EXYNOS5250_TMU_DRV_DATA,
 	},
 	{
+		.compatible = "samsung,exynos5260-tmu",
+		.data = (void *)EXYNOS5260_TMU_DRV_DATA,
+	},
+	{
+		.compatible = "samsung,exynos5420-tmu",
+		.data = (void *)EXYNOS5420_TMU_DRV_DATA,
+	},
+	{
+		.compatible = "samsung,exynos5420-tmu-ext-triminfo",
+		.data = (void *)EXYNOS5420_TMU_DRV_DATA,
+	},
+	{
 		.compatible = "samsung,exynos5440-tmu",
 		.data = (void *)EXYNOS5440_TMU_DRV_DATA,
 	},
@@ -580,7 +610,7 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 	 * Check if the TMU shares some registers and then try to map the
 	 * memory of common registers.
 	 */
-	if (!TMU_SUPPORTS(pdata, SHARED_MEMORY))
+	if (!TMU_SUPPORTS(pdata, ADDRESS_MULTIPLE))
 		return 0;
 
 	if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
@@ -588,9 +618,9 @@ static int exynos_map_dt_data(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	data->base_common = devm_ioremap(&pdev->dev, res.start,
+	data->base_second = devm_ioremap(&pdev->dev, res.start,
 					resource_size(&res));
-	if (!data->base_common) {
+	if (!data->base_second) {
 		dev_err(&pdev->dev, "Failed to ioremap memory\n");
 		return -ENOMEM;
 	}
@@ -607,10 +637,8 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 
 	data = devm_kzalloc(&pdev->dev, sizeof(struct exynos_tmu_data),
 					GFP_KERNEL);
-	if (!data) {
-		dev_err(&pdev->dev, "Failed to allocate driver structure\n");
+	if (!data)
 		return -ENOMEM;
-	}
 
 	platform_set_drvdata(pdev, data);
 	mutex_init(&data->lock);
@@ -629,13 +657,31 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		return  PTR_ERR(data->clk);
 	}
 
+	data->clk_sec = devm_clk_get(&pdev->dev, "tmu_triminfo_apbif");
+	if (IS_ERR(data->clk_sec)) {
+		if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
+			dev_err(&pdev->dev, "Failed to get triminfo clock\n");
+			return PTR_ERR(data->clk_sec);
+		}
+	} else {
+		ret = clk_prepare(data->clk_sec);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to get clock\n");
+			return ret;
+		}
+	}
+
 	ret = clk_prepare(data->clk);
-	if (ret)
-		return ret;
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get clock\n");
+		goto err_clk_sec;
+	}
 
 	if (pdata->type == SOC_ARCH_EXYNOS4210 ||
 	    pdata->type == SOC_ARCH_EXYNOS4412 ||
 	    pdata->type == SOC_ARCH_EXYNOS5250 ||
+	    pdata->type == SOC_ARCH_EXYNOS5260 ||
+	    pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO ||
 	    pdata->type == SOC_ARCH_EXYNOS5440)
 		data->soc = pdata->type;
 	else {
@@ -656,7 +702,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	sensor_conf = devm_kzalloc(&pdev->dev,
 				sizeof(struct thermal_sensor_conf), GFP_KERNEL);
 	if (!sensor_conf) {
-		dev_err(&pdev->dev, "Failed to allocate registration struct\n");
 		ret = -ENOMEM;
 		goto err_clk;
 	}
@@ -704,6 +749,9 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	return 0;
 err_clk:
 	clk_unprepare(data->clk);
+err_clk_sec:
+	if (!IS_ERR(data->clk_sec))
+		clk_unprepare(data->clk_sec);
 	return ret;
 }
 
@@ -716,6 +764,8 @@ static int exynos_tmu_remove(struct platform_device *pdev)
 	exynos_unregister_thermal(data->reg_conf);
 
 	clk_unprepare(data->clk);
+	if (!IS_ERR(data->clk_sec))
+		clk_unprepare(data->clk_sec);
 
 	if (!IS_ERR(data->regulator))
 		regulator_disable(data->regulator);
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 3fb65547e64c9d..edd08cf7672921 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -43,6 +43,8 @@ enum soc_type {
 	SOC_ARCH_EXYNOS4210 = 1,
 	SOC_ARCH_EXYNOS4412,
 	SOC_ARCH_EXYNOS5250,
+	SOC_ARCH_EXYNOS5260,
+	SOC_ARCH_EXYNOS5420_TRIMINFO,
 	SOC_ARCH_EXYNOS5440,
 };
 
@@ -60,7 +62,7 @@ enum soc_type {
  *			state(active/idle) can be checked.
  * TMU_SUPPORT_EMUL_TIME - This features allows to set next temp emulation
  *			sample time.
- * TMU_SUPPORT_SHARED_MEMORY - This feature tells that the different TMU
+ * TMU_SUPPORT_ADDRESS_MULTIPLE - This feature tells that the different TMU
  *			sensors shares some common registers.
  * TMU_SUPPORT - macro to compare the above features with the supplied.
  */
@@ -70,7 +72,7 @@ enum soc_type {
 #define TMU_SUPPORT_FALLING_TRIP		BIT(3)
 #define TMU_SUPPORT_READY_STATUS		BIT(4)
 #define TMU_SUPPORT_EMUL_TIME			BIT(5)
-#define TMU_SUPPORT_SHARED_MEMORY		BIT(6)
+#define TMU_SUPPORT_ADDRESS_MULTIPLE		BIT(6)
 
 #define TMU_SUPPORTS(a, b)	(a->features & TMU_SUPPORT_ ## b)
 
@@ -122,10 +124,6 @@ enum soc_type {
  * @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
  * @tmu_inten: register containing the different threshold interrupt
 	enable bits.
- * @inten_rise_shift: shift bits of all rising interrupt bits.
- * @inten_rise_mask: mask bits of all rising interrupt bits.
- * @inten_fall_shift: shift bits of all rising interrupt bits.
- * @inten_fall_mask: mask bits of all rising interrupt bits.
  * @inten_rise0_shift: shift bits of rising 0 interrupt bits.
  * @inten_rise1_shift: shift bits of rising 1 interrupt bits.
  * @inten_rise2_shift: shift bits of rising 2 interrupt bits.
@@ -136,6 +134,10 @@ enum soc_type {
  * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
  * @tmu_intstat: Register containing the interrupt status values.
  * @tmu_intclear: Register for clearing the raised interrupt status.
+ * @intclr_fall_shift: shift bits for interrupt clear fall 0
+ * @intclr_rise_shift: shift bits of all rising interrupt bits.
+ * @intclr_rise_mask: mask bits of all rising interrupt bits.
+ * @intclr_fall_mask: mask bits of all rising interrupt bits.
  * @emul_con: TMU emulation controller register.
  * @emul_temp_shift: shift bits of emulation temperature.
  * @emul_time_shift: shift bits of emulation time.
@@ -149,6 +151,7 @@ struct exynos_tmu_registers {
 	u32	triminfo_85_shift;
 
 	u32	triminfo_ctrl;
+	u32	triminfo_ctrl1;
 	u32	triminfo_reload_shift;
 
 	u32	tmu_ctrl;
@@ -191,10 +194,6 @@ struct exynos_tmu_registers {
 	u32	threshold_th3_l0_shift;
 
 	u32	tmu_inten;
-	u32	inten_rise_shift;
-	u32	inten_rise_mask;
-	u32	inten_fall_shift;
-	u32	inten_fall_mask;
 	u32	inten_rise0_shift;
 	u32	inten_rise1_shift;
 	u32	inten_rise2_shift;
@@ -207,6 +206,10 @@ struct exynos_tmu_registers {
 	u32	tmu_intstat;
 
 	u32	tmu_intclear;
+	u32	intclr_fall_shift;
+	u32	intclr_rise_shift;
+	u32	intclr_fall_mask;
+	u32	intclr_rise_mask;
 
 	u32	emul_con;
 	u32	emul_temp_shift;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 476b768c633e93..c1d81dcd781993 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -40,13 +40,13 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = {
 	.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
 	.threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0,
 	.tmu_inten = EXYNOS_TMU_REG_INTEN,
-	.inten_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
 	.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
 	.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
 	.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
 	.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
 	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
 	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+	.intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
 };
 
 struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
@@ -112,10 +112,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
 	.threshold_th0 = EXYNOS_THD_TEMP_RISE,
 	.threshold_th1 = EXYNOS_THD_TEMP_FALL,
 	.tmu_inten = EXYNOS_TMU_REG_INTEN,
-	.inten_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
-	.inten_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
-	.inten_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
-	.inten_fall_shift = EXYNOS_TMU_FALL_INT_SHIFT,
 	.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
 	.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
 	.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
@@ -123,6 +119,10 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
 	.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
 	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
 	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+	.intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
+	.intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
+	.intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
+	.intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
 	.emul_con = EXYNOS_EMUL_CON,
 	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
 	.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
@@ -194,6 +194,197 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
 };
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS5260)
+static const struct exynos_tmu_registers exynos5260_tmu_registers = {
+	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
+	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
+	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL1,
+	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+	.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
+	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
+	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
+	.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+	.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+	.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+	.tmu_status = EXYNOS_TMU_REG_STATUS,
+	.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
+	.threshold_th0 = EXYNOS_THD_TEMP_RISE,
+	.threshold_th1 = EXYNOS_THD_TEMP_FALL,
+	.tmu_inten = EXYNOS5260_TMU_REG_INTEN,
+	.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
+	.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
+	.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
+	.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
+	.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
+	.tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT,
+	.tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR,
+	.intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
+	.intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
+	.intclr_rise_mask = EXYNOS5260_TMU_RISE_INT_MASK,
+	.intclr_fall_mask = EXYNOS5260_TMU_FALL_INT_MASK,
+	.emul_con = EXYNOS5260_EMUL_CON,
+	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
+	.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
+	.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
+};
+
+#define __EXYNOS5260_TMU_DATA	\
+	.threshold_falling = 10, \
+	.trigger_levels[0] = 85, \
+	.trigger_levels[1] = 103, \
+	.trigger_levels[2] = 110, \
+	.trigger_levels[3] = 120, \
+	.trigger_enable[0] = true, \
+	.trigger_enable[1] = true, \
+	.trigger_enable[2] = true, \
+	.trigger_enable[3] = false, \
+	.trigger_type[0] = THROTTLE_ACTIVE, \
+	.trigger_type[1] = THROTTLE_ACTIVE, \
+	.trigger_type[2] = SW_TRIP, \
+	.trigger_type[3] = HW_TRIP, \
+	.max_trigger_level = 4, \
+	.gain = 8, \
+	.reference_voltage = 16, \
+	.noise_cancel_mode = 4, \
+	.cal_type = TYPE_ONE_POINT_TRIMMING, \
+	.efuse_value = 55, \
+	.min_efuse_value = 40, \
+	.max_efuse_value = 100, \
+	.first_point_trim = 25, \
+	.second_point_trim = 85, \
+	.default_temp_offset = 50, \
+	.freq_tab[0] = { \
+		.freq_clip_max = 800 * 1000, \
+		.temp_level = 85, \
+	}, \
+	.freq_tab[1] = { \
+		.freq_clip_max = 200 * 1000, \
+		.temp_level = 103, \
+	}, \
+	.freq_tab_count = 2, \
+	.registers = &exynos5260_tmu_registers, \
+
+#define EXYNOS5260_TMU_DATA \
+	__EXYNOS5260_TMU_DATA \
+	.type = SOC_ARCH_EXYNOS5260, \
+	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
+			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+			TMU_SUPPORT_EMUL_TIME)
+
+struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
+	.tmu_data = {
+		{ EXYNOS5260_TMU_DATA },
+		{ EXYNOS5260_TMU_DATA },
+		{ EXYNOS5260_TMU_DATA },
+		{ EXYNOS5260_TMU_DATA },
+		{ EXYNOS5260_TMU_DATA },
+	},
+	.tmu_count = 5,
+};
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5420)
+static const struct exynos_tmu_registers exynos5420_tmu_registers = {
+	.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
+	.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
+	.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
+	.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
+	.buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
+	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
+	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
+	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
+	.buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
+	.buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
+	.core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
+	.tmu_status = EXYNOS_TMU_REG_STATUS,
+	.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
+	.threshold_th0 = EXYNOS_THD_TEMP_RISE,
+	.threshold_th1 = EXYNOS_THD_TEMP_FALL,
+	.tmu_inten = EXYNOS_TMU_REG_INTEN,
+	.inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
+	.inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
+	.inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
+	/* INTEN_RISE3 Not availble in exynos5420 */
+	.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
+	.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
+	.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
+	.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
+	.intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
+	.intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
+	.intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
+	.intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
+	.emul_con = EXYNOS_EMUL_CON,
+	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
+	.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
+	.emul_time_mask = EXYNOS_EMUL_TIME_MASK,
+};
+
+#define __EXYNOS5420_TMU_DATA	\
+	.threshold_falling = 10, \
+	.trigger_levels[0] = 85, \
+	.trigger_levels[1] = 103, \
+	.trigger_levels[2] = 110, \
+	.trigger_levels[3] = 120, \
+	.trigger_enable[0] = true, \
+	.trigger_enable[1] = true, \
+	.trigger_enable[2] = true, \
+	.trigger_enable[3] = false, \
+	.trigger_type[0] = THROTTLE_ACTIVE, \
+	.trigger_type[1] = THROTTLE_ACTIVE, \
+	.trigger_type[2] = SW_TRIP, \
+	.trigger_type[3] = HW_TRIP, \
+	.max_trigger_level = 4, \
+	.gain = 8, \
+	.reference_voltage = 16, \
+	.noise_cancel_mode = 4, \
+	.cal_type = TYPE_ONE_POINT_TRIMMING, \
+	.efuse_value = 55, \
+	.min_efuse_value = 40, \
+	.max_efuse_value = 100, \
+	.first_point_trim = 25, \
+	.second_point_trim = 85, \
+	.default_temp_offset = 50, \
+	.freq_tab[0] = { \
+		.freq_clip_max = 800 * 1000, \
+		.temp_level = 85, \
+	}, \
+	.freq_tab[1] = { \
+		.freq_clip_max = 200 * 1000, \
+		.temp_level = 103, \
+	}, \
+	.freq_tab_count = 2, \
+	.registers = &exynos5420_tmu_registers, \
+
+#define EXYNOS5420_TMU_DATA \
+	__EXYNOS5420_TMU_DATA \
+	.type = SOC_ARCH_EXYNOS5250, \
+	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
+			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+			TMU_SUPPORT_EMUL_TIME)
+
+#define EXYNOS5420_TMU_DATA_SHARED \
+	__EXYNOS5420_TMU_DATA \
+	.type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
+	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
+			TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
+			TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE)
+
+struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
+	.tmu_data = {
+		{ EXYNOS5420_TMU_DATA },
+		{ EXYNOS5420_TMU_DATA },
+		{ EXYNOS5420_TMU_DATA_SHARED },
+		{ EXYNOS5420_TMU_DATA_SHARED },
+		{ EXYNOS5420_TMU_DATA_SHARED },
+	},
+	.tmu_count = 5,
+};
+#endif
+
 #if defined(CONFIG_SOC_EXYNOS5440)
 static const struct exynos_tmu_registers exynos5440_tmu_registers = {
 	.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
@@ -217,10 +408,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
 	.threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
 	.threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
 	.tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
-	.inten_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
-	.inten_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
-	.inten_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
-	.inten_fall_shift = EXYNOS5440_TMU_FALL_INT_SHIFT,
 	.inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
 	.inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
 	.inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
@@ -228,6 +415,10 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
 	.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
 	.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
 	.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
+	.intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT,
+	.intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
+	.intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
+	.intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
 	.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
 	.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
 	.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
@@ -255,7 +446,7 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
 	.type = SOC_ARCH_EXYNOS5440, \
 	.registers = &exynos5440_tmu_registers, \
 	.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
-			TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_SHARED_MEMORY),
+			TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_ADDRESS_MULTIPLE),
 
 struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
 	.tmu_data = {
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index a1ea19d9e0a6e6..d268981b65e5f1 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -69,9 +69,11 @@
 #define EXYNOS_TMU_RISE_INT_MASK	0x111
 #define EXYNOS_TMU_RISE_INT_SHIFT	0
 #define EXYNOS_TMU_FALL_INT_MASK	0x111
-#define EXYNOS_TMU_FALL_INT_SHIFT	12
 #define EXYNOS_TMU_CLEAR_RISE_INT	0x111
 #define EXYNOS_TMU_CLEAR_FALL_INT	(0x111 << 12)
+#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT	12
+#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT	16
+#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT	4
 #define EXYNOS_TMU_TRIP_MODE_SHIFT	13
 #define EXYNOS_TMU_TRIP_MODE_MASK	0x7
 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT	12
@@ -85,6 +87,7 @@
 #define EXYNOS_TMU_INTEN_FALL0_SHIFT	16
 #define EXYNOS_TMU_INTEN_FALL1_SHIFT	20
 #define EXYNOS_TMU_INTEN_FALL2_SHIFT	24
+#define EXYNOS_TMU_INTEN_FALL3_SHIFT	28
 
 #define EXYNOS_EMUL_TIME	0x57F0
 #define EXYNOS_EMUL_TIME_MASK	0xffff
@@ -95,6 +98,17 @@
 
 #define EXYNOS_MAX_TRIGGER_PER_REG	4
 
+/* Exynos5260 specific */
+#define EXYNOS_TMU_REG_CONTROL1			0x24
+#define EXYNOS5260_TMU_REG_INTEN		0xC0
+#define EXYNOS5260_TMU_REG_INTSTAT		0xC4
+#define EXYNOS5260_TMU_REG_INTCLEAR		0xC8
+#define EXYNOS5260_TMU_CLEAR_RISE_INT		0x1111
+#define EXYNOS5260_TMU_CLEAR_FALL_INT		(0x1111 << 16)
+#define EXYNOS5260_TMU_RISE_INT_MASK		0x1111
+#define EXYNOS5260_TMU_FALL_INT_MASK		0x1111
+#define EXYNOS5260_EMUL_CON			0x100
+
 /* Exynos4412 specific */
 #define EXYNOS4412_MUX_ADDR_VALUE          6
 #define EXYNOS4412_MUX_ADDR_SHIFT          20
@@ -119,7 +133,6 @@
 #define EXYNOS5440_TMU_RISE_INT_MASK		0xf
 #define EXYNOS5440_TMU_RISE_INT_SHIFT		0
 #define EXYNOS5440_TMU_FALL_INT_MASK		0xf
-#define EXYNOS5440_TMU_FALL_INT_SHIFT		4
 #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT	0
 #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT	1
 #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT	2
@@ -156,6 +169,20 @@ extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
 #define EXYNOS5250_TMU_DRV_DATA (NULL)
 #endif
 
+#if defined(CONFIG_SOC_EXYNOS5260)
+extern struct exynos_tmu_init_data const exynos5260_default_tmu_data;
+#define EXYNOS5260_TMU_DRV_DATA (&exynos5260_default_tmu_data)
+#else
+#define EXYNOS5260_TMU_DRV_DATA (NULL)
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5420)
+extern struct exynos_tmu_init_data const exynos5420_default_tmu_data;
+#define EXYNOS5420_TMU_DRV_DATA (&exynos5420_default_tmu_data)
+#else
+#define EXYNOS5420_TMU_DRV_DATA (NULL)
+#endif
+
 #if defined(CONFIG_SOC_EXYNOS5440)
 extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
 #define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c
index ab79ea4701d9f8..1e2193fc3241f8 100644
--- a/drivers/thermal/spear_thermal.c
+++ b/drivers/thermal/spear_thermal.c
@@ -113,10 +113,8 @@ static int spear_thermal_probe(struct platform_device *pdev)
 	}
 
 	stdev = devm_kzalloc(&pdev->dev, sizeof(*stdev), GFP_KERNEL);
-	if (!stdev) {
-		dev_err(&pdev->dev, "kzalloc fail\n");
+	if (!stdev)
 		return -ENOMEM;
-	}
 
 	/* Enable thermal sensor */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 3ab12ee359b793..a1271b55103ace 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -1248,7 +1248,7 @@ int ti_bandgap_probe(struct platform_device *pdev)
 	clk_rate = clk_round_rate(bgp->div_clk,
 				  bgp->conf->sensors[0].ts_data->max_freq);
 	if (clk_rate < bgp->conf->sensors[0].ts_data->min_freq ||
-	    clk_rate == 0xffffffff) {
+	    clk_rate <= 0) {
 		ret = -ENODEV;
 		dev_err(&pdev->dev, "wrong clock rate (%d)\n", clk_rate);
 		goto put_clks;