aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/iio/imu/bmi323/bmi323.h
blob: dff126d41658393ca49f28fc8e7b0f1920cf97f4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
/* SPDX-License-Identifier: GPL-2.0 */
/*
 * IIO driver for Bosch BMI323 6-Axis IMU
 *
 * Copyright (C) 2023, Jagath Jog J <jagathjog1996@gmail.com>
 */

#ifndef _BMI323_H_
#define _BMI323_H_

#include <linux/bits.h>
#include <linux/regmap.h>
#include <linux/units.h>

#define BMI323_I2C_DUMMY			2
#define BMI323_SPI_DUMMY			1

/* Register map */

#define BMI323_CHIP_ID_REG			0x00
#define BMI323_CHIP_ID_VAL			0x0043
#define BMI323_CHIP_ID_MSK			GENMASK(7, 0)
#define BMI323_ERR_REG				0x01
#define BMI323_STATUS_REG			0x02
#define BMI323_STATUS_POR_MSK			BIT(0)

/* Accelero/Gyro/Temp data registers */
#define BMI323_ACCEL_X_REG			0x03
#define BMI323_GYRO_X_REG			0x06
#define BMI323_TEMP_REG				0x09
#define BMI323_ALL_CHAN_MSK			GENMASK(5, 0)

/* Status registers */
#define BMI323_STATUS_INT1_REG			0x0D
#define BMI323_STATUS_INT2_REG			0x0E
#define BMI323_STATUS_NOMOTION_MSK		BIT(0)
#define BMI323_STATUS_MOTION_MSK		BIT(1)
#define BMI323_STATUS_STP_WTR_MSK		BIT(5)
#define BMI323_STATUS_TAP_MSK			BIT(8)
#define BMI323_STATUS_ERROR_MSK			BIT(10)
#define BMI323_STATUS_TMP_DRDY_MSK		BIT(11)
#define BMI323_STATUS_GYR_DRDY_MSK		BIT(12)
#define BMI323_STATUS_ACC_DRDY_MSK		BIT(13)
#define BMI323_STATUS_ACC_GYR_DRDY_MSK		GENMASK(13, 12)
#define BMI323_STATUS_FIFO_WTRMRK_MSK		BIT(14)
#define BMI323_STATUS_FIFO_FULL_MSK		BIT(15)

/* Feature registers */
#define BMI323_FEAT_IO0_REG			0x10
#define BMI323_FEAT_IO0_XYZ_NOMOTION_MSK	GENMASK(2, 0)
#define BMI323_FEAT_IO0_XYZ_MOTION_MSK		GENMASK(5, 3)
#define BMI323_FEAT_XYZ_MSK			GENMASK(2, 0)
#define BMI323_FEAT_IO0_STP_CNT_MSK		BIT(9)
#define BMI323_FEAT_IO0_S_TAP_MSK		BIT(12)
#define BMI323_FEAT_IO0_D_TAP_MSK		BIT(13)
#define BMI323_FEAT_IO1_REG			0x11
#define BMI323_FEAT_IO1_ERR_MSK			GENMASK(3, 0)
#define BMI323_FEAT_IO2_REG			0x12
#define BMI323_FEAT_IO_STATUS_REG		0x14
#define BMI323_FEAT_IO_STATUS_MSK		BIT(0)
#define BMI323_FEAT_ENG_POLL			2000
#define BMI323_FEAT_ENG_TIMEOUT			10000

/* FIFO registers */
#define BMI323_FIFO_FILL_LEVEL_REG		0x15
#define BMI323_FIFO_DATA_REG			0x16

/* Accelero/Gyro config registers */
#define BMI323_ACC_CONF_REG			0x20
#define BMI323_GYRO_CONF_REG			0x21
#define BMI323_ACC_GYRO_CONF_MODE_MSK		GENMASK(14, 12)
#define BMI323_ACC_GYRO_CONF_ODR_MSK		GENMASK(3, 0)
#define BMI323_ACC_GYRO_CONF_SCL_MSK		GENMASK(6, 4)
#define BMI323_ACC_GYRO_CONF_BW_MSK		BIT(7)
#define BMI323_ACC_GYRO_CONF_AVG_MSK		GENMASK(10, 8)

/* FIFO registers */
#define BMI323_FIFO_WTRMRK_REG			0x35
#define BMI323_FIFO_CONF_REG			0x36
#define BMI323_FIFO_CONF_STP_FUL_MSK		BIT(0)
#define BMI323_FIFO_CONF_ACC_GYR_EN_MSK		GENMASK(10, 9)
#define BMI323_FIFO_ACC_GYR_MSK			GENMASK(1, 0)
#define BMI323_FIFO_CTRL_REG			0x37
#define BMI323_FIFO_FLUSH_MSK			BIT(0)

/* Interrupt pin config registers */
#define BMI323_IO_INT_CTR_REG			0x38
#define BMI323_IO_INT1_LVL_MSK			BIT(0)
#define BMI323_IO_INT1_OD_MSK			BIT(1)
#define BMI323_IO_INT1_OP_EN_MSK		BIT(2)
#define BMI323_IO_INT1_LVL_OD_OP_MSK		GENMASK(2, 0)
#define BMI323_IO_INT2_LVL_MSK			BIT(8)
#define BMI323_IO_INT2_OD_MSK			BIT(9)
#define BMI323_IO_INT2_OP_EN_MSK		BIT(10)
#define BMI323_IO_INT2_LVL_OD_OP_MSK		GENMASK(10, 8)
#define BMI323_IO_INT_CONF_REG			0x39
#define BMI323_IO_INT_LTCH_MSK			BIT(0)
#define BMI323_INT_MAP1_REG			0x3A
#define BMI323_INT_MAP2_REG			0x3B
#define BMI323_NOMOTION_MSK			GENMASK(1, 0)
#define BMI323_MOTION_MSK			GENMASK(3, 2)
#define BMI323_STEP_CNT_MSK			GENMASK(11, 10)
#define BMI323_TAP_MSK				GENMASK(1, 0)
#define BMI323_TMP_DRDY_MSK			GENMASK(7, 6)
#define BMI323_GYR_DRDY_MSK			GENMASK(9, 8)
#define BMI323_ACC_DRDY_MSK			GENMASK(11, 10)
#define BMI323_FIFO_WTRMRK_MSK			GENMASK(13, 12)
#define BMI323_FIFO_FULL_MSK			GENMASK(15, 14)

/* Feature registers */
#define BMI323_FEAT_CTRL_REG			0x40
#define BMI323_FEAT_ENG_EN_MSK			BIT(0)
#define BMI323_FEAT_DATA_ADDR			0x41
#define BMI323_FEAT_DATA_TX			0x42
#define BMI323_FEAT_DATA_STATUS			0x43
#define BMI323_FEAT_DATA_TX_RDY_MSK		BIT(1)
#define BMI323_FEAT_EVNT_EXT_REG		0x47
#define BMI323_FEAT_EVNT_EXT_S_MSK		BIT(3)
#define BMI323_FEAT_EVNT_EXT_D_MSK		BIT(4)

#define BMI323_CMD_REG				0x7E
#define BMI323_RST_VAL				0xDEAF
#define BMI323_CFG_RES_REG			0x7F

/* Extended registers */
#define BMI323_GEN_SET1_REG			0x02
#define BMI323_GEN_SET1_MODE_MSK		BIT(0)
#define BMI323_GEN_HOLD_DUR_MSK			GENMASK(4, 1)

/* Any Motion/No Motion config registers */
#define BMI323_ANYMO1_REG			0x05
#define BMI323_NOMO1_REG			0x08
#define BMI323_MO2_OFFSET			0x01
#define BMI323_MO3_OFFSET			0x02
#define BMI323_MO1_REF_UP_MSK			BIT(12)
#define BMI323_MO1_SLOPE_TH_MSK			GENMASK(11, 0)
#define BMI323_MO2_HYSTR_MSK			GENMASK(9, 0)
#define BMI323_MO3_DURA_MSK			GENMASK(12, 0)

/* Step counter config registers */
#define BMI323_STEP_SC1_REG			0x10
#define BMI323_STEP_SC1_WTRMRK_MSK		GENMASK(9, 0)
#define BMI323_STEP_SC1_RST_CNT_MSK		BIT(10)
#define BMI323_STEP_SC1_REG			0x10
#define BMI323_STEP_LEN				2

/* Tap gesture config registers */
#define BMI323_TAP1_REG				0x1E
#define BMI323_TAP1_AXIS_SEL_MSK		GENMASK(1, 0)
#define BMI323_AXIS_XYZ_MSK			GENMASK(1, 0)
#define BMI323_TAP1_TIMOUT_MSK			BIT(2)
#define BMI323_TAP1_MAX_PEAKS_MSK		GENMASK(5, 3)
#define BMI323_TAP1_MODE_MSK			GENMASK(7, 6)
#define BMI323_TAP2_REG				0x1F
#define BMI323_TAP2_THRES_MSK			GENMASK(9, 0)
#define BMI323_TAP2_MAX_DUR_MSK			GENMASK(15, 10)
#define BMI323_TAP3_REG				0x20
#define BMI323_TAP3_QUIET_TIM_MSK		GENMASK(15, 12)
#define BMI323_TAP3_QT_BW_TAP_MSK		GENMASK(11, 8)
#define BMI323_TAP3_QT_AFT_GES_MSK		GENMASK(15, 12)

#define BMI323_MOTION_THRES_SCALE		512
#define BMI323_MOTION_HYSTR_SCALE		512
#define BMI323_MOTION_DURAT_SCALE		50
#define BMI323_TAP_THRES_SCALE			512
#define BMI323_DUR_BW_TAP_SCALE			200
#define BMI323_QUITE_TIM_GES_SCALE		25
#define BMI323_MAX_GES_DUR_SCALE		25

/*
 * The formula to calculate temperature in C.
 * See datasheet section 6.1.1, Register Map Overview
 *
 * T_C = (temp_raw / 512) + 23
 */
#define BMI323_TEMP_OFFSET			11776
#define BMI323_TEMP_SCALE			1953125

/*
 * The BMI323 features a FIFO with a capacity of 2048 bytes. Each frame
 * consists of accelerometer (X, Y, Z) data and gyroscope (X, Y, Z) data,
 * totaling 6 words or 12 bytes. The FIFO buffer can hold a total of
 * 170 frames.
 *
 * If a watermark interrupt is configured for 170 frames, the interrupt will
 * trigger when the FIFO reaches 169 frames, so limit the maximum watermark
 * level to 169 frames. In terms of data, 169 frames would equal 1014 bytes,
 * which is approximately 2 frames before the FIFO reaches its full capacity.
 * See datasheet section 5.7.3 FIFO Buffer Interrupts
 */
#define BMI323_BYTES_PER_SAMPLE			2
#define BMI323_FIFO_LENGTH_IN_BYTES		2048
#define BMI323_FIFO_FRAME_LENGTH		6
#define BMI323_FIFO_FULL_IN_FRAMES		\
	((BMI323_FIFO_LENGTH_IN_BYTES /		\
	(BMI323_BYTES_PER_SAMPLE * BMI323_FIFO_FRAME_LENGTH)) - 1)
#define BMI323_FIFO_FULL_IN_WORDS		\
	(BMI323_FIFO_FULL_IN_FRAMES * BMI323_FIFO_FRAME_LENGTH)

#define BMI323_INT_MICRO_TO_RAW(val, val2, scale) ((val) * (scale) + \
						  ((val2) * (scale)) / MEGA)

#define BMI323_RAW_TO_MICRO(raw, scale) ((((raw) % (scale)) * MEGA) / scale)

struct device;
int bmi323_core_probe(struct device *dev);
extern const struct regmap_config bmi323_regmap_config;

#endif