Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git

37 files changed, 2834 insertions, 1050 deletions

diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
index 3e2d216c6432b2..dc4ac41f244117 100644
--- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
+++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml
@@ -18,8 +18,9 @@ allOf:
 
 properties:
   compatible:
-    items:
-      - const: elan,ekth6915
+    enum:
+      - elan,ekth6915
+      - ilitek,ili2901
 
   reg:
     const: 0x10
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 4ce74af7965794..4c682c65070408 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -761,14 +761,15 @@ config HID_MULTITOUCH
 	  module will be called hid-multitouch.
 
 config HID_NINTENDO
-	tristate "Nintendo Joy-Con and Pro Controller support"
+	tristate "Nintendo Joy-Con, NSO, and Pro Controller support"
 	depends on NEW_LEDS
 	depends on LEDS_CLASS
 	select POWER_SUPPLY
 	help
-	Adds support for the Nintendo Switch Joy-Cons and Pro Controller.
+	Adds support for the Nintendo Switch Joy-Cons, NSO, Pro Controller.
 	All controllers support bluetooth, and the Pro Controller also supports
-	its USB mode.
+	its USB mode. This also includes support for the Nintendo Switch Online
+	Controllers which include the Genesis, SNES, and N64 controllers.
 
 	To compile this driver as a module, choose M here: the
 	module will be called hid-nintendo.
@@ -779,9 +780,9 @@ config NINTENDO_FF
 	select INPUT_FF_MEMLESS
 	help
 	Say Y here if you have a Nintendo Switch controller and want to enable
-	force feedback support for it. This works for both joy-cons and the pro
-	controller. For the pro controller, both rumble motors can be controlled
-	individually.
+	force feedback support for it. This works for both joy-cons, the pro
+	controller, and the NSO N64 controller. For the pro controller, both
+	rumble motors can be controlled individually.
 
 config HID_NTI
 	tristate "NTI keyboard adapters"
@@ -1296,6 +1297,15 @@ config HID_ALPS
 	Say Y here if you have a Alps touchpads over i2c-hid or usbhid
 	and want support for its special functionalities.
 
+config HID_MCP2200
+	tristate "Microchip MCP2200 HID USB-to-GPIO bridge"
+	depends on USB_HID && GPIOLIB
+	help
+	  Provides GPIO functionality over USB-HID through MCP2200 device.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called hid-mcp2200.ko.
+
 config HID_MCP2221
 	tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support"
 	depends on USB_HID && I2C
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 8a06d0f840bcbe..082a728eac6004 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_HID_LOGITECH_HIDPP)	+= hid-logitech-hidpp.o
 obj-$(CONFIG_HID_MACALLY)	+= hid-macally.o
 obj-$(CONFIG_HID_MAGICMOUSE)	+= hid-magicmouse.o
 obj-$(CONFIG_HID_MALTRON)	+= hid-maltron.o
+obj-$(CONFIG_HID_MCP2200)	+= hid-mcp2200.o
 obj-$(CONFIG_HID_MCP2221)	+= hid-mcp2221.o
 obj-$(CONFIG_HID_MAYFLASH)	+= hid-mf.o
 obj-$(CONFIG_HID_MEGAWORLD_FF)	+= hid-megaworld.o
diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_common.h b/drivers/hid/amd-sfh-hid/amd_sfh_common.h
index 2643bb14fee27c..a1950bc6e6cefe 100644
--- a/drivers/hid/amd-sfh-hid/amd_sfh_common.h
+++ b/drivers/hid/amd-sfh-hid/amd_sfh_common.h
@@ -37,6 +37,11 @@ struct amd_mp2_sensor_info {
 	dma_addr_t dma_address;
 };
 
+struct sfh_dev_status {
+	bool is_hpd_present;
+	bool is_als_present;
+};
+
 struct amd_mp2_dev {
 	struct pci_dev *pdev;
 	struct amdtp_cl_data *cl_data;
@@ -47,6 +52,7 @@ struct amd_mp2_dev {
 	struct amd_input_data in_data;
 	/* mp2 active control status */
 	u32 mp2_acs;
+	struct sfh_dev_status dev_en;
 };
 
 struct amd_mp2_ops {
diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c
index 8a037de08e924d..33fbdde8aff00c 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c
@@ -132,7 +132,7 @@ static void get_common_inputs(struct common_input_property *common, int report_i
 	common->event_type = HID_USAGE_SENSOR_EVENT_DATA_UPDATED_ENUM;
 }
 
-static int float_to_int(u32 flt32_val)
+int amd_sfh_float_to_int(u32 flt32_val)
 {
 	int fraction, shift, mantissa, sign, exp, zeropre;
 
@@ -201,9 +201,9 @@ static u8 get_input_rep(u8 current_index, int sensor_idx, int report_id,
 			     OFFSET_SENSOR_DATA_DEFAULT;
 		memcpy_fromio(&accel_data, sensoraddr, sizeof(struct sfh_accel_data));
 		get_common_inputs(&acc_input.common_property, report_id);
-		acc_input.in_accel_x_value = float_to_int(accel_data.acceldata.x) / 100;
-		acc_input.in_accel_y_value = float_to_int(accel_data.acceldata.y) / 100;
-		acc_input.in_accel_z_value = float_to_int(accel_data.acceldata.z) / 100;
+		acc_input.in_accel_x_value = amd_sfh_float_to_int(accel_data.acceldata.x) / 100;
+		acc_input.in_accel_y_value = amd_sfh_float_to_int(accel_data.acceldata.y) / 100;
+		acc_input.in_accel_z_value = amd_sfh_float_to_int(accel_data.acceldata.z) / 100;
 		memcpy(input_report, &acc_input, sizeof(acc_input));
 		report_size = sizeof(acc_input);
 		break;
@@ -212,9 +212,9 @@ static u8 get_input_rep(u8 current_index, int sensor_idx, int report_id,
 			     OFFSET_SENSOR_DATA_DEFAULT;
 		memcpy_fromio(&gyro_data, sensoraddr, sizeof(struct sfh_gyro_data));
 		get_common_inputs(&gyro_input.common_property, report_id);
-		gyro_input.in_angel_x_value = float_to_int(gyro_data.gyrodata.x) / 1000;
-		gyro_input.in_angel_y_value = float_to_int(gyro_data.gyrodata.y) / 1000;
-		gyro_input.in_angel_z_value = float_to_int(gyro_data.gyrodata.z) / 1000;
+		gyro_input.in_angel_x_value = amd_sfh_float_to_int(gyro_data.gyrodata.x) / 1000;
+		gyro_input.in_angel_y_value = amd_sfh_float_to_int(gyro_data.gyrodata.y) / 1000;
+		gyro_input.in_angel_z_value = amd_sfh_float_to_int(gyro_data.gyrodata.z) / 1000;
 		memcpy(input_report, &gyro_input, sizeof(gyro_input));
 		report_size = sizeof(gyro_input);
 		break;
@@ -223,9 +223,9 @@ static u8 get_input_rep(u8 current_index, int sensor_idx, int report_id,
 			     OFFSET_SENSOR_DATA_DEFAULT;
 		memcpy_fromio(&mag_data, sensoraddr, sizeof(struct sfh_mag_data));
 		get_common_inputs(&magno_input.common_property, report_id);
-		magno_input.in_magno_x = float_to_int(mag_data.magdata.x) / 100;
-		magno_input.in_magno_y = float_to_int(mag_data.magdata.y) / 100;
-		magno_input.in_magno_z = float_to_int(mag_data.magdata.z) / 100;
+		magno_input.in_magno_x = amd_sfh_float_to_int(mag_data.magdata.x) / 100;
+		magno_input.in_magno_y = amd_sfh_float_to_int(mag_data.magdata.y) / 100;
+		magno_input.in_magno_z = amd_sfh_float_to_int(mag_data.magdata.z) / 100;
 		magno_input.in_magno_accuracy = mag_data.accuracy / 100;
 		memcpy(input_report, &magno_input, sizeof(magno_input));
 		report_size = sizeof(magno_input);
@@ -235,13 +235,15 @@ static u8 get_input_rep(u8 current_index, int sensor_idx, int report_id,
 			     OFFSET_SENSOR_DATA_DEFAULT;
 		memcpy_fromio(&als_data, sensoraddr, sizeof(struct sfh_als_data));
 		get_common_inputs(&als_input.common_property, report_id);
-		als_input.illuminance_value = float_to_int(als_data.lux);
+		als_input.illuminance_value = amd_sfh_float_to_int(als_data.lux);
 
 		memcpy_fromio(&binfo, mp2->vsbase, sizeof(struct sfh_base_info));
 		if (binfo.sbase.s_prop[ALS_IDX].sf.feat & 0x2) {
 			als_input.light_color_temp = als_data.light_color_temp;
-			als_input.chromaticity_x_value = float_to_int(als_data.chromaticity_x);
-			als_input.chromaticity_y_value = float_to_int(als_data.chromaticity_y);
+			als_input.chromaticity_x_value =
+				amd_sfh_float_to_int(als_data.chromaticity_x);
+			als_input.chromaticity_y_value =
+				amd_sfh_float_to_int(als_data.chromaticity_y);
 		}
 
 		report_size = sizeof(als_input);
diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
index e9c6413af24a07..9dbe6f4cb29426 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
@@ -73,6 +73,15 @@ static int amd_sfh_hid_client_deinit(struct amd_mp2_dev *privdata)
 	int i, status;
 
 	for (i = 0; i < cl_data->num_hid_devices; i++) {
+		switch (cl_data->sensor_idx[i]) {
+		case HPD_IDX:
+			privdata->dev_en.is_hpd_present = false;
+			break;
+		case ALS_IDX:
+			privdata->dev_en.is_als_present = false;
+			break;
+		}
+
 		if (cl_data->sensor_sts[i] == SENSOR_ENABLED) {
 			privdata->mp2_ops->stop(privdata, cl_data->sensor_idx[i]);
 			status = amd_sfh_wait_for_response
@@ -178,6 +187,14 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata)
 			rc = amdtp_hid_probe(i, cl_data);
 			if (rc)
 				goto cleanup;
+			switch (cl_data->sensor_idx[i]) {
+			case HPD_IDX:
+				privdata->dev_en.is_hpd_present = true;
+				break;
+			case ALS_IDX:
+				privdata->dev_en.is_als_present = true;
+				break;
+			}
 		}
 		dev_dbg(dev, "sid 0x%x (%s) status 0x%x\n",
 			cl_data->sensor_idx[i], get_sensor_name(cl_data->sensor_idx[i]),
@@ -259,6 +276,7 @@ static void amd_mp2_pci_remove(void *privdata)
 {
 	struct amd_mp2_dev *mp2 = privdata;
 
+	sfh_deinit_emp2();
 	amd_sfh_hid_client_deinit(privdata);
 	mp2->mp2_ops->stop_all(mp2);
 	pci_intx(mp2->pdev, false);
@@ -311,12 +329,14 @@ int amd_sfh1_1_init(struct amd_mp2_dev *mp2)
 
 	rc = amd_sfh_irq_init(mp2);
 	if (rc) {
+		sfh_deinit_emp2();
 		dev_err(dev, "amd_sfh_irq_init failed\n");
 		return rc;
 	}
 
 	rc = amd_sfh1_1_hid_client_init(mp2);
 	if (rc) {
+		sfh_deinit_emp2();
 		dev_err(dev, "amd_sfh1_1_hid_client_init failed\n");
 		return rc;
 	}
diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c
index 4f81ef2d4f56ea..ae36312bc23650 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.c
@@ -7,11 +7,14 @@
  *
  * Author: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
  */
+#include <linux/amd-pmf-io.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/iopoll.h>
 
 #include "amd_sfh_interface.h"
 
+static struct amd_mp2_dev *emp2;
+
 static int amd_sfh_wait_response(struct amd_mp2_dev *mp2, u8 sid, u32 cmd_id)
 {
 	struct sfh_cmd_response cmd_resp;
@@ -73,7 +76,63 @@ static struct amd_mp2_ops amd_sfh_ops = {
 	.response = amd_sfh_wait_response,
 };
 
+void sfh_deinit_emp2(void)
+{
+	emp2 = NULL;
+}
+
 void sfh_interface_init(struct amd_mp2_dev *mp2)
 {
 	mp2->mp2_ops = &amd_sfh_ops;
+	emp2 = mp2;
+}
+
+static int amd_sfh_hpd_info(u8 *user_present)
+{
+	struct hpd_status hpdstatus;
+
+	if (!user_present)
+		return -EINVAL;
+
+	if (!emp2 || !emp2->dev_en.is_hpd_present)
+		return -ENODEV;
+
+	hpdstatus.val = readl(emp2->mmio + AMD_C2P_MSG(4));
+	*user_present = hpdstatus.shpd.presence;
+
+	return 0;
+}
+
+static int amd_sfh_als_info(u32 *ambient_light)
+{
+	struct sfh_als_data als_data;
+	void __iomem *sensoraddr;
+
+	if (!ambient_light)
+		return -EINVAL;
+
+	if (!emp2 || !emp2->dev_en.is_als_present)
+		return -ENODEV;
+
+	sensoraddr = emp2->vsbase +
+		(ALS_IDX * SENSOR_DATA_MEM_SIZE_DEFAULT) +
+		OFFSET_SENSOR_DATA_DEFAULT;
+	memcpy_fromio(&als_data, sensoraddr, sizeof(struct sfh_als_data));
+	*ambient_light = amd_sfh_float_to_int(als_data.lux);
+
+	return 0;
+}
+
+int amd_get_sfh_info(struct amd_sfh_info *sfh_info, enum sfh_message_type op)
+{
+	if (sfh_info) {
+		switch (op) {
+		case MT_HPD:
+			return amd_sfh_hpd_info(&sfh_info->user_present);
+		case MT_ALS:
+			return amd_sfh_als_info(&sfh_info->ambient_light);
+		}
+	}
+	return -EINVAL;
 }
+EXPORT_SYMBOL_GPL(amd_get_sfh_info);
diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h
index 656c3e95ef8c33..2c211d28764da5 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_interface.h
@@ -165,5 +165,7 @@ struct hpd_status {
 };
 
 void sfh_interface_init(struct amd_mp2_dev *mp2);
+void sfh_deinit_emp2(void);
 void amd_sfh1_1_set_desc_ops(struct amd_mp2_ops *mp2_ops);
+int amd_sfh_float_to_int(u32 flt32_val);
 #endif
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index e0181218ad8578..de7a477d66656c 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -2749,7 +2749,7 @@ static int hid_uevent(const struct device *dev, struct kobj_uevent_env *env)
 	return 0;
 }
 
-struct bus_type hid_bus_type = {
+const struct bus_type hid_bus_type = {
 	.name		= "hid",
 	.dev_groups	= hid_dev_groups,
 	.drv_groups	= hid_drv_groups,
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 72046039d1be75..fb30e228d35f9a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -916,6 +916,7 @@
 #define USB_DEVICE_ID_PICK16F1454	0x0042
 #define USB_DEVICE_ID_PICK16F1454_V2	0xf2f7
 #define USB_DEVICE_ID_LUXAFOR		0xf372
+#define USB_DEVICE_ID_MCP2200		0x00df
 #define USB_DEVICE_ID_MCP2221		0x00dd
 
 #define USB_VENDOR_ID_MICROSOFT		0x045e
@@ -987,7 +988,10 @@
 #define USB_DEVICE_ID_NINTENDO_JOYCONL	0x2006
 #define USB_DEVICE_ID_NINTENDO_JOYCONR	0x2007
 #define USB_DEVICE_ID_NINTENDO_PROCON	0x2009
-#define USB_DEVICE_ID_NINTENDO_CHRGGRIP	0x200E
+#define USB_DEVICE_ID_NINTENDO_CHRGGRIP	0x200e
+#define USB_DEVICE_ID_NINTENDO_SNESCON	0x2017
+#define USB_DEVICE_ID_NINTENDO_GENCON	0x201e
+#define USB_DEVICE_ID_NINTENDO_N64CON	0x2019
 
 #define USB_VENDOR_ID_NOVATEK		0x0603
 #define USB_DEVICE_ID_NOVATEK_PCT	0x0600
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index c9c968d4b36a39..a46ff4e8b99f54 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -120,6 +120,9 @@ MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state fie
  * @scroll_jiffies: Time of last scroll motion.
  * @touches: Most recent data for a touch, indexed by tracking ID.
  * @tracking_ids: Mapping of current touch input data to @touches.
+ * @hdev: Pointer to the underlying HID device.
+ * @work: Workqueue to handle initialization retry for quirky devices.
+ * @battery_timer: Timer for obtaining battery level information.
  */
 struct magicmouse_sc {
 	struct input_dev *input;
diff --git a/drivers/hid/hid-mcp2200.c b/drivers/hid/hid-mcp2200.c
new file mode 100644
index 00000000000000..bf57f7f6caa084
--- /dev/null
+++ b/drivers/hid/hid-mcp2200.c
@@ -0,0 +1,392 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MCP2200 - Microchip USB to GPIO bridge
+ *
+ * Copyright (c) 2023, Johannes Roith <johannes@gnu-linux.rocks>
+ *
+ * Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/22228A.pdf
+ * App Note for HID: https://ww1.microchip.com/downloads/en/DeviceDoc/93066A.pdf
+ */
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/hid.h>
+#include <linux/hidraw.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include "hid-ids.h"
+
+/* Commands codes in a raw output report */
+#define SET_CLEAR_OUTPUTS	0x08
+#define CONFIGURE		0x10
+#define READ_EE			0x20
+#define WRITE_EE		0x40
+#define READ_ALL		0x80
+
+/* MCP GPIO direction encoding */
+enum MCP_IO_DIR {
+	MCP2200_DIR_OUT = 0x00,
+	MCP2200_DIR_IN  = 0x01,
+};
+
+/* Altternative pin assignments */
+#define TXLED		2
+#define RXLED		3
+#define USBCFG		6
+#define SSPND		7
+#define MCP_NGPIO	8
+
+/* CMD to set or clear a GPIO output */
+struct mcp_set_clear_outputs {
+	u8 cmd;
+	u8 dummys1[10];
+	u8 set_bmap;
+	u8 clear_bmap;
+	u8 dummys2[3];
+} __packed;
+
+/* CMD to configure the IOs */
+struct mcp_configure {
+	u8 cmd;
+	u8 dummys1[3];
+	u8 io_bmap;
+	u8 config_alt_pins;
+	u8 io_default_val_bmap;
+	u8 config_alt_options;
+	u8 baud_h;
+	u8 baud_l;
+	u8 dummys2[6];
+} __packed;
+
+/* CMD to read all parameters */
+struct mcp_read_all {
+	u8 cmd;
+	u8 dummys[15];
+} __packed;
+
+/* Response to the read all cmd */
+struct mcp_read_all_resp {
+	u8 cmd;
+	u8 eep_addr;
+	u8 dummy;
+	u8 eep_val;
+	u8 io_bmap;
+	u8 config_alt_pins;
+	u8 io_default_val_bmap;
+	u8 config_alt_options;
+	u8 baud_h;
+	u8 baud_l;
+	u8 io_port_val_bmap;
+	u8 dummys[5];
+} __packed;
+
+struct mcp2200 {
+	struct hid_device *hdev;
+	struct mutex lock;
+	struct completion wait_in_report;
+	u8 gpio_dir;
+	u8 gpio_val;
+	u8 gpio_inval;
+	u8 baud_h;
+	u8 baud_l;
+	u8 config_alt_pins;
+	u8 gpio_reset_val;
+	u8 config_alt_options;
+	int status;
+	struct gpio_chip gc;
+	u8 hid_report[16];
+};
+
+/* this executes the READ_ALL cmd */
+static int mcp_cmd_read_all(struct mcp2200 *mcp)
+{
+	struct mcp_read_all *read_all;
+	int len, t;
+
+	reinit_completion(&mcp->wait_in_report);
+
+	mutex_lock(&mcp->lock);
+
+	read_all = (struct mcp_read_all *) mcp->hid_report;
+	read_all->cmd = READ_ALL;
+	len = hid_hw_output_report(mcp->hdev, (u8 *) read_all,
+				   sizeof(struct mcp_read_all));
+
+	mutex_unlock(&mcp->lock);
+
+	if (len != sizeof(struct mcp_read_all))
+		return -EINVAL;
+
+	t = wait_for_completion_timeout(&mcp->wait_in_report,
+					msecs_to_jiffies(4000));
+	if (!t)
+		return -ETIMEDOUT;
+
+	/* return status, negative value if wrong response was received */
+	return mcp->status;
+}
+
+static void mcp_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+			     unsigned long *bits)
+{
+	struct mcp2200 *mcp = gpiochip_get_data(gc);
+	u8 value;
+	int status;
+	struct mcp_set_clear_outputs *cmd;
+
+	mutex_lock(&mcp->lock);
+	cmd = (struct mcp_set_clear_outputs *) mcp->hid_report;
+
+	value = mcp->gpio_val & ~*mask;
+	value |= (*mask & *bits);
+
+	cmd->cmd = SET_CLEAR_OUTPUTS;
+	cmd->set_bmap = value;
+	cmd->clear_bmap = ~(value);
+
+	status = hid_hw_output_report(mcp->hdev, (u8 *) cmd,
+		       sizeof(struct mcp_set_clear_outputs));
+
+	if (status == sizeof(struct mcp_set_clear_outputs))
+		mcp->gpio_val = value;
+
+	mutex_unlock(&mcp->lock);
+}
+
+static void mcp_set(struct gpio_chip *gc, unsigned int gpio_nr, int value)
+{
+	unsigned long mask = 1 << gpio_nr;
+	unsigned long bmap_value = value << gpio_nr;
+
+	mcp_set_multiple(gc, &mask, &bmap_value);
+}
+
+static int mcp_get_multiple(struct gpio_chip *gc, unsigned long *mask,
+		unsigned long *bits)
+{
+	u32 val;
+	struct mcp2200 *mcp = gpiochip_get_data(gc);
+	int status;
+
+	status = mcp_cmd_read_all(mcp);
+	if (status)
+		return status;
+
+	val = mcp->gpio_inval;
+	*bits = (val & *mask);
+	return 0;
+}
+
+static int mcp_get(struct gpio_chip *gc, unsigned int gpio_nr)
+{
+	unsigned long mask = 0, bits = 0;
+
+	mask = (1 << gpio_nr);
+	mcp_get_multiple(gc, &mask, &bits);
+	return bits > 0;
+}
+
+static int mcp_get_direction(struct gpio_chip *gc, unsigned int gpio_nr)
+{
+	struct mcp2200 *mcp = gpiochip_get_data(gc);
+
+	return (mcp->gpio_dir & (MCP2200_DIR_IN << gpio_nr))
+		? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
+}
+
+static int mcp_set_direction(struct gpio_chip *gc, unsigned int gpio_nr,
+			     enum MCP_IO_DIR io_direction)
+{
+	struct mcp2200 *mcp = gpiochip_get_data(gc);
+	struct mcp_configure *conf;
+	int status;
+	/* after the configure cmd we will need to set the outputs again */
+	unsigned long mask = ~(mcp->gpio_dir); /* only set outputs */
+	unsigned long bits = mcp->gpio_val;
+	/* Offsets of alternative pins in config_alt_pins, 0 is not used */
+	u8 alt_pin_conf[8] = {SSPND, USBCFG, 0, 0, 0, 0, RXLED, TXLED};
+	u8 config_alt_pins = mcp->config_alt_pins;
+
+	/* Read in the reset baudrate first, we need it later */
+	status = mcp_cmd_read_all(mcp);
+	if (status != 0)
+		return status;
+
+	mutex_lock(&mcp->lock);
+	conf = (struct mcp_configure  *) mcp->hid_report;
+
+	/* configure will reset the chip! */
+	conf->cmd = CONFIGURE;
+	conf->io_bmap = (mcp->gpio_dir & ~(1 << gpio_nr))
+		| (io_direction << gpio_nr);
+	/* Don't overwrite the reset parameters */
+	conf->baud_h = mcp->baud_h;
+	conf->baud_l = mcp->baud_l;
+	conf->config_alt_options = mcp->config_alt_options;
+	conf->io_default_val_bmap = mcp->gpio_reset_val;
+	/* Adjust alt. func if necessary */
+	if (alt_pin_conf[gpio_nr])
+		config_alt_pins &= ~(1 << alt_pin_conf[gpio_nr]);
+	conf->config_alt_pins = config_alt_pins;
+
+	status = hid_hw_output_report(mcp->hdev, (u8 *) conf,
+				      sizeof(struct mcp_set_clear_outputs));
+
+	if (status == sizeof(struct mcp_set_clear_outputs)) {
+		mcp->gpio_dir = conf->io_bmap;
+		mcp->config_alt_pins = config_alt_pins;
+	} else {
+		mutex_unlock(&mcp->lock);
+		return -EIO;
+	}
+
+	mutex_unlock(&mcp->lock);
+
+	/* Configure CMD will clear all IOs -> rewrite them */
+	mcp_set_multiple(gc, &mask, &bits);
+	return 0;
+}
+
+static int mcp_direction_input(struct gpio_chip *gc, unsigned int gpio_nr)
+{
+	return mcp_set_direction(gc, gpio_nr, MCP2200_DIR_IN);
+}
+
+static int mcp_direction_output(struct gpio_chip *gc, unsigned int gpio_nr,
+				int value)
+{
+	int ret;
+	unsigned long mask, bmap_value;
+
+	mask = 1 << gpio_nr;
+	bmap_value = value << gpio_nr;
+
+	ret = mcp_set_direction(gc, gpio_nr, MCP2200_DIR_OUT);
+	if (!ret)
+		mcp_set_multiple(gc, &mask, &bmap_value);
+	return ret;
+}
+
+static const struct gpio_chip template_chip = {
+	.label			= "mcp2200",
+	.owner			= THIS_MODULE,
+	.get_direction		= mcp_get_direction,
+	.direction_input	= mcp_direction_input,
+	.direction_output	= mcp_direction_output,
+	.set			= mcp_set,
+	.set_multiple		= mcp_set_multiple,
+	.get			= mcp_get,
+	.get_multiple		= mcp_get_multiple,
+	.base			= -1,
+	.ngpio			= MCP_NGPIO,
+	.can_sleep		= true,
+};
+
+/*
+ * MCP2200 uses interrupt endpoint for input reports. This function
+ * is called by HID layer when it receives i/p report from mcp2200,
+ * which is actually a response to the previously sent command.
+ */
+static int mcp2200_raw_event(struct hid_device *hdev, struct hid_report *report,
+		u8 *data, int size)
+{
+	struct mcp2200 *mcp = hid_get_drvdata(hdev);
+	struct mcp_read_all_resp *all_resp;
+
+	switch (data[0]) {
+	case READ_ALL:
+		all_resp = (struct mcp_read_all_resp *) data;
+		mcp->status = 0;
+		mcp->gpio_inval = all_resp->io_port_val_bmap;
+		mcp->baud_h = all_resp->baud_h;
+		mcp->baud_l = all_resp->baud_l;
+		mcp->gpio_reset_val = all_resp->io_default_val_bmap;
+		mcp->config_alt_pins = all_resp->config_alt_pins;
+		mcp->config_alt_options = all_resp->config_alt_options;
+		break;
+	default:
+		mcp->status = -EIO;
+		break;
+	}
+
+	complete(&mcp->wait_in_report);
+	return 0;
+}
+
+static int mcp2200_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+	struct mcp2200 *mcp;
+
+	mcp = devm_kzalloc(&hdev->dev, sizeof(*mcp), GFP_KERNEL);
+	if (!mcp)
+		return -ENOMEM;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "can't parse reports\n");
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, 0);
+	if (ret) {
+		hid_err(hdev, "can't start hardware\n");
+		return ret;
+	}
+
+	hid_info(hdev, "USB HID v%x.%02x Device [%s] on %s\n", hdev->version >> 8,
+			hdev->version & 0xff, hdev->name, hdev->phys);
+
+	ret = hid_hw_open(hdev);
+	if (ret) {
+		hid_err(hdev, "can't open device\n");
+		hid_hw_stop(hdev);
+		return ret;
+	}
+
+	mutex_init(&mcp->lock);
+	init_completion(&mcp->wait_in_report);
+	hid_set_drvdata(hdev, mcp);
+	mcp->hdev = hdev;
+
+	mcp->gc = template_chip;
+	mcp->gc.parent = &hdev->dev;
+
+	ret = devm_gpiochip_add_data(&hdev->dev, &mcp->gc, mcp);
+	if (ret < 0) {
+		hid_err(hdev, "Unable to register gpiochip\n");
+		hid_hw_close(hdev);
+		hid_hw_stop(hdev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void mcp2200_remove(struct hid_device *hdev)
+{
+	hid_hw_close(hdev);
+	hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id mcp2200_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_MCP2200) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, mcp2200_devices);
+
+static struct hid_driver mcp2200_driver = {
+	.name		= "mcp2200",
+	.id_table	= mcp2200_devices,
+	.probe		= mcp2200_probe,
+	.remove		= mcp2200_remove,
+	.raw_event	= mcp2200_raw_event,
+};
+
+/* Register with HID core */
+module_hid_driver(mcp2200_driver);
+
+MODULE_AUTHOR("Johannes Roith <johannes@gnu-linux.rocks>");
+MODULE_DESCRIPTION("MCP2200 Microchip HID USB to GPIO bridge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-mcp2221.c b/drivers/hid/hid-mcp2221.c
index aef0785c91cc2d..f9cceaeffd0814 100644
--- a/drivers/hid/hid-mcp2221.c
+++ b/drivers/hid/hid-mcp2221.c
@@ -49,6 +49,7 @@ enum {
 	MCP2221_I2C_MASK_ADDR_NACK = 0x40,
 	MCP2221_I2C_WRADDRL_SEND = 0x21,
 	MCP2221_I2C_ADDR_NACK = 0x25,
+	MCP2221_I2C_READ_PARTIAL = 0x54,
 	MCP2221_I2C_READ_COMPL = 0x55,
 	MCP2221_ALT_F_NOT_GPIOV = 0xEE,
 	MCP2221_ALT_F_NOT_GPIOD = 0xEF,
@@ -187,6 +188,25 @@ static int mcp_cancel_last_cmd(struct mcp2221 *mcp)
 	return mcp_send_data_req_status(mcp, mcp->txbuf, 8);
 }
 
+/* Check if the last command succeeded or failed and return the result.
+ * If the command did fail, cancel that command which will free the i2c bus.
+ */
+static int mcp_chk_last_cmd_status_free_bus(struct mcp2221 *mcp)
+{
+	int ret;
+
+	ret = mcp_chk_last_cmd_status(mcp);
+	if (ret) {
+		/* The last command was a failure.
+		 * Send a cancel which will also free the bus.
+		 */
+		usleep_range(980, 1000);
+		mcp_cancel_last_cmd(mcp);
+	}
+
+	return ret;
+}
+
 static int mcp_set_i2c_speed(struct mcp2221 *mcp)
 {
 	int ret;
@@ -241,7 +261,7 @@ static int mcp_i2c_write(struct mcp2221 *mcp,
 		usleep_range(980, 1000);
 
 		if (last_status) {
-			ret = mcp_chk_last_cmd_status(mcp);
+			ret = mcp_chk_last_cmd_status_free_bus(mcp);
 			if (ret)
 				return ret;
 		}
@@ -278,6 +298,7 @@ static int mcp_i2c_smbus_read(struct mcp2221 *mcp,
 {
 	int ret;
 	u16 total_len;
+	int retries = 0;
 
 	mcp->txbuf[0] = type;
 	if (msg) {
@@ -301,20 +322,31 @@ static int mcp_i2c_smbus_read(struct mcp2221 *mcp,
 	mcp->rxbuf_idx = 0;
 
 	do {
+		/* Wait for the data to be read by the device */
+		usleep_range(980, 1000);
+
 		memset(mcp->txbuf, 0, 4);
 		mcp->txbuf[0] = MCP2221_I2C_GET_DATA;
 
 		ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
-		if (ret)
-			return ret;
-
-		ret = mcp_chk_last_cmd_status(mcp);
-		if (ret)
-			return ret;
-
-		usleep_range(980, 1000);
+		if (ret) {
+			if (retries < 5) {
+				/* The data wasn't ready to read.
+				 * Wait a bit longer and try again.
+				 */
+				usleep_range(90, 100);
+				retries++;
+			} else {
+				return ret;
+			}
+		} else {
+			retries = 0;
+		}
 	} while (mcp->rxbuf_idx < total_len);
 
+	usleep_range(980, 1000);
+	ret = mcp_chk_last_cmd_status_free_bus(mcp);
+
 	return ret;
 }
 
@@ -328,11 +360,6 @@ static int mcp_i2c_xfer(struct i2c_adapter *adapter,
 
 	mutex_lock(&mcp->lock);
 
-	/* Setting speed before every transaction is required for mcp2221 */
-	ret = mcp_set_i2c_speed(mcp);
-	if (ret)
-		goto exit;
-
 	if (num == 1) {
 		if (msgs->flags & I2C_M_RD) {
 			ret = mcp_i2c_smbus_read(mcp, msgs, MCP2221_I2C_RD_DATA,
@@ -417,9 +444,7 @@ static int mcp_smbus_write(struct mcp2221 *mcp, u16 addr,
 	if (last_status) {
 		usleep_range(980, 1000);
 
-		ret = mcp_chk_last_cmd_status(mcp);
-		if (ret)
-			return ret;
+		ret = mcp_chk_last_cmd_status_free_bus(mcp);
 	}
 
 	return ret;
@@ -437,10 +462,6 @@ static int mcp_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
 
 	mutex_lock(&mcp->lock);
 
-	ret = mcp_set_i2c_speed(mcp);
-	if (ret)
-		goto exit;
-
 	switch (size) {
 
 	case I2C_SMBUS_QUICK:
@@ -791,7 +812,8 @@ static int mcp2221_raw_event(struct hid_device *hdev,
 				mcp->status = -EIO;
 				break;
 			}
-			if (data[2] == MCP2221_I2C_READ_COMPL) {
+			if (data[2] == MCP2221_I2C_READ_COMPL ||
+			    data[2] == MCP2221_I2C_READ_PARTIAL) {
 				buf = mcp->rxbuf;
 				memcpy(&buf[mcp->rxbuf_idx], &data[4], data[3]);
 				mcp->rxbuf_idx = mcp->rxbuf_idx + data[3];
@@ -1150,12 +1172,18 @@ static int mcp2221_probe(struct hid_device *hdev,
 	if (i2c_clk_freq < 50)
 		i2c_clk_freq = 50;
 	mcp->cur_i2c_clk_div = (12000000 / (i2c_clk_freq * 1000)) - 3;
+	ret = mcp_set_i2c_speed(mcp);
+	if (ret) {
+		hid_err(hdev, "can't set i2c speed: %d\n", ret);
+		return ret;
+	}
 
 	mcp->adapter.owner = THIS_MODULE;
 	mcp->adapter.class = I2C_CLASS_HWMON;
 	mcp->adapter.algo = &mcp_i2c_algo;
 	mcp->adapter.retries = 1;
 	mcp->adapter.dev.parent = &hdev->dev;
+	ACPI_COMPANION_SET(&mcp->adapter.dev, ACPI_COMPANION(hdev->dev.parent));
 	snprintf(mcp->adapter.name, sizeof(mcp->adapter.name),
 			"MCP2221 usb-i2c bridge");
 
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 997c3a1adacab2..ccc4032fb2b03f 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -3,6 +3,9 @@
  * HID driver for Nintendo Switch Joy-Cons and Pro Controllers
  *
  * Copyright (c) 2019-2021 Daniel J. Ogorchock <djogorchock@gmail.com>
+ * Portions Copyright (c) 2020 Nadia Holmquist Pedersen <nadia@nhp.sh>
+ * Copyright (c) 2022 Emily Strickland <linux@emily.st>
+ * Copyright (c) 2023 Ryan McClelland <rymcclel@gmail.com>
  *
  * The following resources/projects were referenced for this driver:
  *   https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering
@@ -17,6 +20,9 @@
  * This driver supports the Nintendo Switch Joy-Cons and Pro Controllers. The
  * Pro Controllers can either be used over USB or Bluetooth.
  *
+ * This driver also incorporates support for Nintendo Switch Online controllers
+ * for the NES, SNES, Sega Genesis, and N64.
+ *
  * The driver will retrieve the factory calibration info from the controllers,
  * so little to no user calibration should be required.
  *
@@ -305,9 +311,14 @@ enum joycon_ctlr_state {
 
 /* Controller type received as part of device info */
 enum joycon_ctlr_type {
-	JOYCON_CTLR_TYPE_JCL = 0x01,
-	JOYCON_CTLR_TYPE_JCR = 0x02,
-	JOYCON_CTLR_TYPE_PRO = 0x03,
+	JOYCON_CTLR_TYPE_JCL  = 0x01,
+	JOYCON_CTLR_TYPE_JCR  = 0x02,
+	JOYCON_CTLR_TYPE_PRO  = 0x03,
+	JOYCON_CTLR_TYPE_NESL = 0x09,
+	JOYCON_CTLR_TYPE_NESR = 0x0A,
+	JOYCON_CTLR_TYPE_SNES = 0x0B,
+	JOYCON_CTLR_TYPE_GEN  = 0x0D,
+	JOYCON_CTLR_TYPE_N64  = 0x0C,
 };
 
 struct joycon_stick_cal {
@@ -348,6 +359,137 @@ struct joycon_imu_cal {
 #define JC_BTN_L	 BIT(22)
 #define JC_BTN_ZL	 BIT(23)
 
+struct joycon_ctlr_button_mapping {
+	u32 code;
+	u32 bit;
+};
+
+/*
+ * D-pad is configured as buttons for the left Joy-Con only!
+ */
+static const struct joycon_ctlr_button_mapping left_joycon_button_mappings[] = {
+	{ BTN_TL,		JC_BTN_L,	},
+	{ BTN_TL2,		JC_BTN_ZL,	},
+	{ BTN_SELECT,		JC_BTN_MINUS,	},
+	{ BTN_THUMBL,		JC_BTN_LSTICK,	},
+	{ BTN_DPAD_UP,		JC_BTN_UP,	},
+	{ BTN_DPAD_DOWN,	JC_BTN_DOWN,	},
+	{ BTN_DPAD_LEFT,	JC_BTN_LEFT,	},
+	{ BTN_DPAD_RIGHT,	JC_BTN_RIGHT,	},
+	{ BTN_Z,		JC_BTN_CAP,	},
+	{ /* sentinel */ },
+};
+
+/*
+ * The unused *right*-side triggers become the SL/SR triggers for the *left*
+ * Joy-Con, if and only if we're not using a charging grip.
+ */
+static const struct joycon_ctlr_button_mapping left_joycon_s_button_mappings[] = {
+	{ BTN_TR,	JC_BTN_SL_L,	},
+	{ BTN_TR2,	JC_BTN_SR_L,	},
+	{ /* sentinel */ },
+};
+
+static const struct joycon_ctlr_button_mapping right_joycon_button_mappings[] = {
+	{ BTN_EAST,	JC_BTN_A,	},
+	{ BTN_SOUTH,	JC_BTN_B,	},
+	{ BTN_NORTH,	JC_BTN_X,	},
+	{ BTN_WEST,	JC_BTN_Y,	},
+	{ BTN_TR,	JC_BTN_R,	},
+	{ BTN_TR2,	JC_BTN_ZR,	},
+	{ BTN_START,	JC_BTN_PLUS,	},
+	{ BTN_THUMBR,	JC_BTN_RSTICK,	},
+	{ BTN_MODE,	JC_BTN_HOME,	},
+	{ /* sentinel */ },
+};
+
+/*
+ * The unused *left*-side triggers become the SL/SR triggers for the *right*
+ * Joy-Con, if and only if we're not using a charging grip.
+ */
+static const struct joycon_ctlr_button_mapping right_joycon_s_button_mappings[] = {
+	{ BTN_TL,	JC_BTN_SL_R,	},
+	{ BTN_TL2,	JC_BTN_SR_R,	},
+	{ /* sentinel */ },
+};
+
+static const struct joycon_ctlr_button_mapping procon_button_mappings[] = {
+	{ BTN_EAST,	JC_BTN_A,	},
+	{ BTN_SOUTH,	JC_BTN_B,	},
+	{ BTN_NORTH,	JC_BTN_X,	},
+	{ BTN_WEST,	JC_BTN_Y,	},
+	{ BTN_TL,	JC_BTN_L,	},
+	{ BTN_TR,	JC_BTN_R,	},
+	{ BTN_TL2,	JC_BTN_ZL,	},
+	{ BTN_TR2,	JC_BTN_ZR,	},
+	{ BTN_SELECT,	JC_BTN_MINUS,	},
+	{ BTN_START,	JC_BTN_PLUS,	},
+	{ BTN_THUMBL,	JC_BTN_LSTICK,	},
+	{ BTN_THUMBR,	JC_BTN_RSTICK,	},
+	{ BTN_MODE,	JC_BTN_HOME,	},
+	{ BTN_Z,	JC_BTN_CAP,	},
+	{ /* sentinel */ },
+};
+
+static const struct joycon_ctlr_button_mapping nescon_button_mappings[] = {
+	{ BTN_SOUTH,	JC_BTN_A,	},
+	{ BTN_EAST,	JC_BTN_B,	},
+	{ BTN_TL,	JC_BTN_L,	},
+	{ BTN_TR,	JC_BTN_R,	},
+	{ BTN_SELECT,	JC_BTN_MINUS,	},
+	{ BTN_START,	JC_BTN_PLUS,	},
+	{ /* sentinel */ },
+};
+
+static const struct joycon_ctlr_button_mapping snescon_button_mappings[] = {
+	{ BTN_EAST,	JC_BTN_A,	},
+	{ BTN_SOUTH,	JC_BTN_B,	},
+	{ BTN_NORTH,	JC_BTN_X,	},
+	{ BTN_WEST,	JC_BTN_Y,	},
+	{ BTN_TL,	JC_BTN_L,	},
+	{ BTN_TR,	JC_BTN_R,	},
+	{ BTN_TL2,	JC_BTN_ZL,	},
+	{ BTN_TR2,	JC_BTN_ZR,	},
+	{ BTN_SELECT,	JC_BTN_MINUS,	},
+	{ BTN_START,	JC_BTN_PLUS,	},
+	{ /* sentinel */ },
+};
+
+/*
+ * "A", "B", and "C" are mapped positionally, rather than by label (e.g., "A"
+ * gets assigned to BTN_EAST instead of BTN_A).
+ */
+static const struct joycon_ctlr_button_mapping gencon_button_mappings[] = {
+	{ BTN_SOUTH,	JC_BTN_A,	},
+	{ BTN_EAST,	JC_BTN_B,	},
+	{ BTN_WEST,	JC_BTN_R,	},
+	{ BTN_SELECT,	JC_BTN_ZR,	},
+	{ BTN_START,	JC_BTN_PLUS,	},
+	{ BTN_MODE,	JC_BTN_HOME,	},
+	{ BTN_Z,	JC_BTN_CAP,	},
+	{ /* sentinel */ },
+};
+
+/*
+ * N64's C buttons get assigned to d-pad directions and registered as buttons.
+ */
+static const struct joycon_ctlr_button_mapping n64con_button_mappings[] = {
+	{ BTN_A,		JC_BTN_A,	},
+	{ BTN_B,		JC_BTN_B,	},
+	{ BTN_TL2,		JC_BTN_ZL,	}, /* Z */
+	{ BTN_TL,		JC_BTN_L,	},
+	{ BTN_TR,		JC_BTN_R,	},
+	{ BTN_TR2,		JC_BTN_LSTICK,	}, /* ZR */
+	{ BTN_START,		JC_BTN_PLUS,	},
+	{ BTN_FORWARD,		JC_BTN_Y,	}, /* C UP */
+	{ BTN_BACK,		JC_BTN_ZR,	}, /* C DOWN */
+	{ BTN_LEFT,		JC_BTN_X,	}, /* C LEFT */
+	{ BTN_RIGHT,		JC_BTN_MINUS,	}, /* C RIGHT */
+	{ BTN_MODE,		JC_BTN_HOME,	},
+	{ BTN_Z,		JC_BTN_CAP,	},
+	{ /* sentinel */ },
+};
+
 enum joycon_msg_type {
 	JOYCON_MSG_TYPE_NONE,
 	JOYCON_MSG_TYPE_USB,
@@ -506,13 +648,182 @@ struct joycon_ctlr {
 /* Does this controller have inputs associated with left joycon? */
 #define jc_type_has_left(ctlr) \
 	(ctlr->ctlr_type == JOYCON_CTLR_TYPE_JCL || \
-	 ctlr->ctlr_type == JOYCON_CTLR_TYPE_PRO)
+	 ctlr->ctlr_type == JOYCON_CTLR_TYPE_PRO || \
+	 ctlr->ctlr_type == JOYCON_CTLR_TYPE_N64)
 
 /* Does this controller have inputs associated with right joycon? */
 #define jc_type_has_right(ctlr) \
 	(ctlr->ctlr_type == JOYCON_CTLR_TYPE_JCR || \
 	 ctlr->ctlr_type == JOYCON_CTLR_TYPE_PRO)
 
+
+/*
+ * Controller device helpers
+ *
+ * These look at the device ID known to the HID subsystem to identify a device,
+ * but take caution: some NSO devices lie about themselves (NES Joy-Cons and
+ * Sega Genesis controller). See type helpers below.
+ *
+ * These helpers are most useful early during the HID probe or in conjunction
+ * with the capability helpers below.
+ */
+static inline bool joycon_device_is_left_joycon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_JOYCONL;
+}
+
+static inline bool joycon_device_is_right_joycon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_JOYCONR;
+}
+
+static inline bool joycon_device_is_procon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_PROCON;
+}
+
+static inline bool joycon_device_is_chrggrip(struct joycon_ctlr *ctlr)
+{
+	return ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_CHRGGRIP;
+}
+
+static inline bool joycon_device_is_snescon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_SNESCON;
+}
+
+static inline bool joycon_device_is_gencon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_GENCON;
+}
+
+static inline bool joycon_device_is_n64con(struct joycon_ctlr *ctlr)
+{
+	return ctlr->hdev->product == USB_DEVICE_ID_NINTENDO_N64CON;
+}
+
+static inline bool joycon_device_has_usb(struct joycon_ctlr *ctlr)
+{
+	return joycon_device_is_procon(ctlr) ||
+	       joycon_device_is_chrggrip(ctlr) ||
+	       joycon_device_is_snescon(ctlr) ||
+	       joycon_device_is_gencon(ctlr) ||
+	       joycon_device_is_n64con(ctlr);
+}
+
+/*
+ * Controller type helpers
+ *
+ * These are slightly different than the device-ID-based helpers above. They are
+ * generally more reliable, since they can distinguish between, e.g., Genesis
+ * versus SNES, or NES Joy-Cons versus regular Switch Joy-Cons. They're most
+ * useful for reporting available inputs. For other kinds of distinctions, see
+ * the capability helpers below.
+ *
+ * They have two major drawbacks: (1) they're not available until after we set
+ * the reporting method and then request the device info; (2) they can't
+ * distinguish all controllers (like the Charging Grip from the Pro controller.)
+ */
+static inline bool joycon_type_is_left_joycon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->ctlr_type == JOYCON_CTLR_TYPE_JCL;
+}
+
+static inline bool joycon_type_is_right_joycon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->ctlr_type == JOYCON_CTLR_TYPE_JCR;
+}
+
+static inline bool joycon_type_is_procon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->ctlr_type == JOYCON_CTLR_TYPE_PRO;
+}
+
+static inline bool joycon_type_is_snescon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->ctlr_type == JOYCON_CTLR_TYPE_SNES;
+}
+
+static inline bool joycon_type_is_gencon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->ctlr_type == JOYCON_CTLR_TYPE_GEN;
+}
+
+static inline bool joycon_type_is_n64con(struct joycon_ctlr *ctlr)
+{
+	return ctlr->ctlr_type == JOYCON_CTLR_TYPE_N64;
+}
+
+static inline bool joycon_type_is_left_nescon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->ctlr_type == JOYCON_CTLR_TYPE_NESL;
+}
+
+static inline bool joycon_type_is_right_nescon(struct joycon_ctlr *ctlr)
+{
+	return ctlr->ctlr_type == JOYCON_CTLR_TYPE_NESR;
+}
+
+static inline bool joycon_type_has_left_controls(struct joycon_ctlr *ctlr)
+{
+	return joycon_type_is_left_joycon(ctlr) ||
+	       joycon_type_is_procon(ctlr);
+}
+
+static inline bool joycon_type_has_right_controls(struct joycon_ctlr *ctlr)
+{
+	return joycon_type_is_right_joycon(ctlr) ||
+	       joycon_type_is_procon(ctlr);
+}
+
+static inline bool joycon_type_is_any_joycon(struct joycon_ctlr *ctlr)
+{
+	return joycon_type_is_left_joycon(ctlr) ||
+	       joycon_type_is_right_joycon(ctlr) ||
+	       joycon_device_is_chrggrip(ctlr);
+}
+
+static inline bool joycon_type_is_any_nescon(struct joycon_ctlr *ctlr)
+{
+	return joycon_type_is_left_nescon(ctlr) ||
+	       joycon_type_is_right_nescon(ctlr);
+}
+
+/*
+ * Controller capability helpers
+ *
+ * These helpers combine the use of the helpers above to detect certain
+ * capabilities during initialization. They are always accurate but (since they
+ * use type helpers) cannot be used early in the HID probe.
+ */
+static inline bool joycon_has_imu(struct joycon_ctlr *ctlr)
+{
+	return joycon_device_is_chrggrip(ctlr) ||
+	       joycon_type_is_any_joycon(ctlr) ||
+	       joycon_type_is_procon(ctlr);
+}
+
+static inline bool joycon_has_joysticks(struct joycon_ctlr *ctlr)
+{
+	return joycon_device_is_chrggrip(ctlr) ||
+	       joycon_type_is_any_joycon(ctlr) ||
+	       joycon_type_is_procon(ctlr) ||
+	       joycon_type_is_n64con(ctlr);
+}
+
+static inline bool joycon_has_rumble(struct joycon_ctlr *ctlr)
+{
+	return joycon_device_is_chrggrip(ctlr) ||
+	       joycon_type_is_any_joycon(ctlr) ||
+	       joycon_type_is_procon(ctlr) ||
+	       joycon_type_is_n64con(ctlr);
+}
+
+static inline bool joycon_using_usb(struct joycon_ctlr *ctlr)
+{
+	return ctlr->hdev->bus == BUS_USB;
+}
+
 static int __joycon_hid_send(struct hid_device *hdev, u8 *data, size_t len)
 {
 	u8 *buf;
@@ -1296,15 +1607,10 @@ static void joycon_parse_imu_report(struct joycon_ctlr *ctlr,
 	}
 }
 
-static void joycon_parse_report(struct joycon_ctlr *ctlr,
-				struct joycon_input_report *rep)
+static void joycon_handle_rumble_report(struct joycon_ctlr *ctlr, struct joycon_input_report *rep)
 {
-	struct input_dev *dev = ctlr->input;
 	unsigned long flags;
-	u8 tmp;
-	u32 btns;
 	unsigned long msecs = jiffies_to_msecs(jiffies);
-	unsigned long report_delta_ms = msecs - ctlr->last_input_report_msecs;
 
 	spin_lock_irqsave(&ctlr->lock, flags);
 	if (IS_ENABLED(CONFIG_NINTENDO_FF) && rep->vibrator_report &&
@@ -1323,11 +1629,21 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr,
 		queue_work(ctlr->rumble_queue, &ctlr->rumble_worker);
 	}
 
-	/* Parse the battery status */
+	spin_unlock_irqrestore(&ctlr->lock, flags);
+}
+
+static void joycon_parse_battery_status(struct joycon_ctlr *ctlr, struct joycon_input_report *rep)
+{
+	u8 tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ctlr->lock, flags);
+
 	tmp = rep->bat_con;
 	ctlr->host_powered = tmp & BIT(0);
 	ctlr->battery_charging = tmp & BIT(4);
 	tmp = tmp >> 5;
+
 	switch (tmp) {
 	case 0: /* empty */
 		ctlr->battery_capacity = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
@@ -1349,102 +1665,121 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr,
 		hid_warn(ctlr->hdev, "Invalid battery status\n");
 		break;
 	}
+
 	spin_unlock_irqrestore(&ctlr->lock, flags);
+}
 
-	/* Parse the buttons and sticks */
-	btns = hid_field_extract(ctlr->hdev, rep->button_status, 0, 24);
-
-	if (jc_type_has_left(ctlr)) {
-		u16 raw_x;
-		u16 raw_y;
-		s32 x;
-		s32 y;
-
-		/* get raw stick values */
-		raw_x = hid_field_extract(ctlr->hdev, rep->left_stick, 0, 12);
-		raw_y = hid_field_extract(ctlr->hdev,
-					  rep->left_stick + 1, 4, 12);
-		/* map the stick values */
-		x = joycon_map_stick_val(&ctlr->left_stick_cal_x, raw_x);
-		y = -joycon_map_stick_val(&ctlr->left_stick_cal_y, raw_y);
-		/* report sticks */
-		input_report_abs(dev, ABS_X, x);
-		input_report_abs(dev, ABS_Y, y);
-
-		/* report buttons */
-		input_report_key(dev, BTN_TL, btns & JC_BTN_L);
-		input_report_key(dev, BTN_TL2, btns & JC_BTN_ZL);
-		input_report_key(dev, BTN_SELECT, btns & JC_BTN_MINUS);
-		input_report_key(dev, BTN_THUMBL, btns & JC_BTN_LSTICK);
-		input_report_key(dev, BTN_Z, btns & JC_BTN_CAP);
-
-		if (jc_type_is_joycon(ctlr)) {
-			/* Report the S buttons as the non-existent triggers */
-			input_report_key(dev, BTN_TR, btns & JC_BTN_SL_L);
-			input_report_key(dev, BTN_TR2, btns & JC_BTN_SR_L);
-
-			/* Report d-pad as digital buttons for the joy-cons */
-			input_report_key(dev, BTN_DPAD_DOWN,
-					 btns & JC_BTN_DOWN);
-			input_report_key(dev, BTN_DPAD_UP, btns & JC_BTN_UP);
-			input_report_key(dev, BTN_DPAD_RIGHT,
-					 btns & JC_BTN_RIGHT);
-			input_report_key(dev, BTN_DPAD_LEFT,
-					 btns & JC_BTN_LEFT);
-		} else {
-			int hatx = 0;
-			int haty = 0;
-
-			/* d-pad x */
-			if (btns & JC_BTN_LEFT)
-				hatx = -1;
-			else if (btns & JC_BTN_RIGHT)
-				hatx = 1;
-			input_report_abs(dev, ABS_HAT0X, hatx);
-
-			/* d-pad y */
-			if (btns & JC_BTN_UP)
-				haty = -1;
-			else if (btns & JC_BTN_DOWN)
-				haty = 1;
-			input_report_abs(dev, ABS_HAT0Y, haty);
-		}
-	}
-	if (jc_type_has_right(ctlr)) {
-		u16 raw_x;
-		u16 raw_y;
-		s32 x;
-		s32 y;
-
-		/* get raw stick values */
-		raw_x = hid_field_extract(ctlr->hdev, rep->right_stick, 0, 12);
-		raw_y = hid_field_extract(ctlr->hdev,
-					  rep->right_stick + 1, 4, 12);
-		/* map stick values */
-		x = joycon_map_stick_val(&ctlr->right_stick_cal_x, raw_x);
-		y = -joycon_map_stick_val(&ctlr->right_stick_cal_y, raw_y);
-		/* report sticks */
-		input_report_abs(dev, ABS_RX, x);
-		input_report_abs(dev, ABS_RY, y);
-
-		/* report buttons */
-		input_report_key(dev, BTN_TR, btns & JC_BTN_R);
-		input_report_key(dev, BTN_TR2, btns & JC_BTN_ZR);
-		if (jc_type_is_joycon(ctlr)) {
-			/* Report the S buttons as the non-existent triggers */
-			input_report_key(dev, BTN_TL, btns & JC_BTN_SL_R);
-			input_report_key(dev, BTN_TL2, btns & JC_BTN_SR_R);
-		}
-		input_report_key(dev, BTN_START, btns & JC_BTN_PLUS);
-		input_report_key(dev, BTN_THUMBR, btns & JC_BTN_RSTICK);
-		input_report_key(dev, BTN_MODE, btns & JC_BTN_HOME);
-		input_report_key(dev, BTN_WEST, btns & JC_BTN_Y);
-		input_report_key(dev, BTN_NORTH, btns & JC_BTN_X);
-		input_report_key(dev, BTN_EAST, btns & JC_BTN_A);
-		input_report_key(dev, BTN_SOUTH, btns & JC_BTN_B);
+static void joycon_report_left_stick(struct joycon_ctlr *ctlr,
+				     struct joycon_input_report *rep)
+{
+	u16 raw_x;
+	u16 raw_y;
+	s32 x;
+	s32 y;
+
+	raw_x = hid_field_extract(ctlr->hdev, rep->left_stick, 0, 12);
+	raw_y = hid_field_extract(ctlr->hdev, rep->left_stick + 1, 4, 12);
+
+	x = joycon_map_stick_val(&ctlr->left_stick_cal_x, raw_x);
+	y = -joycon_map_stick_val(&ctlr->left_stick_cal_y, raw_y);
+
+	input_report_abs(ctlr->input, ABS_X, x);
+	input_report_abs(ctlr->input, ABS_Y, y);
+}
+
+static void joycon_report_right_stick(struct joycon_ctlr *ctlr,
+				      struct joycon_input_report *rep)
+{
+	u16 raw_x;
+	u16 raw_y;
+	s32 x;
+	s32 y;
+
+	raw_x = hid_field_extract(ctlr->hdev, rep->right_stick, 0, 12);
+	raw_y = hid_field_extract(ctlr->hdev, rep->right_stick + 1, 4, 12);
+
+	x = joycon_map_stick_val(&ctlr->right_stick_cal_x, raw_x);
+	y = -joycon_map_stick_val(&ctlr->right_stick_cal_y, raw_y);
+
+	input_report_abs(ctlr->input, ABS_RX, x);
+	input_report_abs(ctlr->input, ABS_RY, y);
+}
+
+static void joycon_report_dpad(struct joycon_ctlr *ctlr,
+			       struct joycon_input_report *rep)
+{
+	int hatx = 0;
+	int haty = 0;
+	u32 btns = hid_field_extract(ctlr->hdev, rep->button_status, 0, 24);
+
+	if (btns & JC_BTN_LEFT)
+		hatx = -1;
+	else if (btns & JC_BTN_RIGHT)
+		hatx = 1;
+
+	if (btns & JC_BTN_UP)
+		haty = -1;
+	else if (btns & JC_BTN_DOWN)
+		haty = 1;
+
+	input_report_abs(ctlr->input, ABS_HAT0X, hatx);
+	input_report_abs(ctlr->input, ABS_HAT0Y, haty);
+}
+
+static void joycon_report_buttons(struct joycon_ctlr *ctlr,
+				  struct joycon_input_report *rep,
+				  const struct joycon_ctlr_button_mapping button_mappings[])
+{
+	const struct joycon_ctlr_button_mapping *button;
+	u32 status = hid_field_extract(ctlr->hdev, rep->button_status, 0, 24);
+
+	for (button = button_mappings; button->code; button++)
+		input_report_key(ctlr->input, button->code, status & button->bit);
+}
+
+static void joycon_parse_report(struct joycon_ctlr *ctlr,
+				struct joycon_input_report *rep)
+{
+	unsigned long flags;
+	unsigned long msecs = jiffies_to_msecs(jiffies);
+	unsigned long report_delta_ms = msecs - ctlr->last_input_report_msecs;
+
+	if (joycon_has_rumble(ctlr))
+		joycon_handle_rumble_report(ctlr, rep);
+
+	joycon_parse_battery_status(ctlr, rep);
+
+	if (joycon_type_is_left_joycon(ctlr)) {
+		joycon_report_left_stick(ctlr, rep);
+		joycon_report_buttons(ctlr, rep, left_joycon_button_mappings);
+		if (!joycon_device_is_chrggrip(ctlr))
+			joycon_report_buttons(ctlr, rep, left_joycon_s_button_mappings);
+	} else if (joycon_type_is_right_joycon(ctlr)) {
+		joycon_report_right_stick(ctlr, rep);
+		joycon_report_buttons(ctlr, rep, right_joycon_button_mappings);
+		if (!joycon_device_is_chrggrip(ctlr))
+			joycon_report_buttons(ctlr, rep, right_joycon_s_button_mappings);
+	} else if (joycon_type_is_procon(ctlr)) {
+		joycon_report_left_stick(ctlr, rep);
+		joycon_report_right_stick(ctlr, rep);
+		joycon_report_dpad(ctlr, rep);
+		joycon_report_buttons(ctlr, rep, procon_button_mappings);
+	} else if (joycon_type_is_any_nescon(ctlr)) {
+		joycon_report_dpad(ctlr, rep);
+		joycon_report_buttons(ctlr, rep, nescon_button_mappings);
+	} else if (joycon_type_is_snescon(ctlr)) {
+		joycon_report_dpad(ctlr, rep);
+		joycon_report_buttons(ctlr, rep, snescon_button_mappings);
+	} else if (joycon_type_is_gencon(ctlr)) {
+		joycon_report_dpad(ctlr, rep);
+		joycon_report_buttons(ctlr, rep, gencon_button_mappings);
+	} else if (joycon_type_is_n64con(ctlr)) {
+		joycon_report_left_stick(ctlr, rep);
+		joycon_report_dpad(ctlr, rep);
+		joycon_report_buttons(ctlr, rep, n64con_button_mappings);
 	}
 
-	input_sync(dev);
+	input_sync(ctlr->input);
 
 	spin_lock_irqsave(&ctlr->lock, flags);
 	ctlr->last_input_report_msecs = msecs;
@@ -1484,7 +1819,7 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr,
 	}
 
 	/* parse IMU data if present */
-	if (rep->id == JC_INPUT_IMU_DATA)
+	if ((rep->id == JC_INPUT_IMU_DATA) && joycon_has_imu(ctlr))
 		joycon_parse_imu_report(ctlr, rep);
 }
 
@@ -1697,123 +2032,65 @@ static int joycon_play_effect(struct input_dev *dev, void *data,
 }
 #endif /* IS_ENABLED(CONFIG_NINTENDO_FF) */
 
-static const unsigned int joycon_button_inputs_l[] = {
-	BTN_SELECT, BTN_Z, BTN_THUMBL,
-	BTN_TL, BTN_TL2,
-	0 /* 0 signals end of array */
-};
-
-static const unsigned int joycon_button_inputs_r[] = {
-	BTN_START, BTN_MODE, BTN_THUMBR,
-	BTN_SOUTH, BTN_EAST, BTN_NORTH, BTN_WEST,
-	BTN_TR, BTN_TR2,
-	0 /* 0 signals end of array */
-};
-
-/* We report joy-con d-pad inputs as buttons and pro controller as a hat. */
-static const unsigned int joycon_dpad_inputs_jc[] = {
-	BTN_DPAD_UP, BTN_DPAD_DOWN, BTN_DPAD_LEFT, BTN_DPAD_RIGHT,
-	0 /* 0 signals end of array */
-};
-
-static int joycon_input_create(struct joycon_ctlr *ctlr)
+static void joycon_config_left_stick(struct input_dev *idev)
 {
-	struct hid_device *hdev;
-	const char *name;
-	const char *imu_name;
-	int ret;
-	int i;
-
-	hdev = ctlr->hdev;
+	input_set_abs_params(idev,
+			     ABS_X,
+			     -JC_MAX_STICK_MAG,
+			     JC_MAX_STICK_MAG,
+			     JC_STICK_FUZZ,
+			     JC_STICK_FLAT);
+	input_set_abs_params(idev,
+			     ABS_Y,
+			     -JC_MAX_STICK_MAG,
+			     JC_MAX_STICK_MAG,
+			     JC_STICK_FUZZ,
+			     JC_STICK_FLAT);
+}
 
-	switch (hdev->product) {
-	case USB_DEVICE_ID_NINTENDO_PROCON:
-		name = "Nintendo Switch Pro Controller";
-		imu_name = "Nintendo Switch Pro Controller IMU";
-		break;
-	case USB_DEVICE_ID_NINTENDO_CHRGGRIP:
-		if (jc_type_has_left(ctlr)) {
-			name = "Nintendo Switch Left Joy-Con (Grip)";
-			imu_name = "Nintendo Switch Left Joy-Con IMU (Grip)";
-		} else {
-			name = "Nintendo Switch Right Joy-Con (Grip)";
-			imu_name = "Nintendo Switch Right Joy-Con IMU (Grip)";
-		}
-		break;
-	case USB_DEVICE_ID_NINTENDO_JOYCONL:
-		name = "Nintendo Switch Left Joy-Con";
-		imu_name = "Nintendo Switch Left Joy-Con IMU";
-		break;
-	case USB_DEVICE_ID_NINTENDO_JOYCONR:
-		name = "Nintendo Switch Right Joy-Con";
-		imu_name = "Nintendo Switch Right Joy-Con IMU";
-		break;
-	default: /* Should be impossible */
-		hid_err(hdev, "Invalid hid product\n");
-		return -EINVAL;
-	}
+static void joycon_config_right_stick(struct input_dev *idev)
+{
+	input_set_abs_params(idev,
+			     ABS_RX,
+			     -JC_MAX_STICK_MAG,
+			     JC_MAX_STICK_MAG,
+			     JC_STICK_FUZZ,
+			     JC_STICK_FLAT);
+	input_set_abs_params(idev,
+			     ABS_RY,
+			     -JC_MAX_STICK_MAG,
+			     JC_MAX_STICK_MAG,
+			     JC_STICK_FUZZ,
+			     JC_STICK_FLAT);
+}
 
-	ctlr->input = devm_input_allocate_device(&hdev->dev);
-	if (!ctlr->input)
-		return -ENOMEM;
-	ctlr->input->id.bustype = hdev->bus;
-	ctlr->input->id.vendor = hdev->vendor;
-	ctlr->input->id.product = hdev->product;
-	ctlr->input->id.version = hdev->version;
-	ctlr->input->uniq = ctlr->mac_addr_str;
-	ctlr->input->name = name;
-	ctlr->input->phys = hdev->phys;
-	input_set_drvdata(ctlr->input, ctlr);
+static void joycon_config_dpad(struct input_dev *idev)
+{
+	input_set_abs_params(idev,
+			     ABS_HAT0X,
+			     -JC_MAX_DPAD_MAG,
+			     JC_MAX_DPAD_MAG,
+			     JC_DPAD_FUZZ,
+			     JC_DPAD_FLAT);
+	input_set_abs_params(idev,
+			     ABS_HAT0Y,
+			     -JC_MAX_DPAD_MAG,
+			     JC_MAX_DPAD_MAG,
+			     JC_DPAD_FUZZ,
+			     JC_DPAD_FLAT);
+}
 
-	/* set up sticks and buttons */
-	if (jc_type_has_left(ctlr)) {
-		input_set_abs_params(ctlr->input, ABS_X,
-				     -JC_MAX_STICK_MAG, JC_MAX_STICK_MAG,
-				     JC_STICK_FUZZ, JC_STICK_FLAT);
-		input_set_abs_params(ctlr->input, ABS_Y,
-				     -JC_MAX_STICK_MAG, JC_MAX_STICK_MAG,
-				     JC_STICK_FUZZ, JC_STICK_FLAT);
-
-		for (i = 0; joycon_button_inputs_l[i] > 0; i++)
-			input_set_capability(ctlr->input, EV_KEY,
-					     joycon_button_inputs_l[i]);
-
-		/* configure d-pad differently for joy-con vs pro controller */
-		if (hdev->product != USB_DEVICE_ID_NINTENDO_PROCON) {
-			for (i = 0; joycon_dpad_inputs_jc[i] > 0; i++)
-				input_set_capability(ctlr->input, EV_KEY,
-						     joycon_dpad_inputs_jc[i]);
-		} else {
-			input_set_abs_params(ctlr->input, ABS_HAT0X,
-					     -JC_MAX_DPAD_MAG, JC_MAX_DPAD_MAG,
-					     JC_DPAD_FUZZ, JC_DPAD_FLAT);
-			input_set_abs_params(ctlr->input, ABS_HAT0Y,
-					     -JC_MAX_DPAD_MAG, JC_MAX_DPAD_MAG,
-					     JC_DPAD_FUZZ, JC_DPAD_FLAT);
-		}
-	}
-	if (jc_type_has_right(ctlr)) {
-		input_set_abs_params(ctlr->input, ABS_RX,
-				     -JC_MAX_STICK_MAG, JC_MAX_STICK_MAG,
-				     JC_STICK_FUZZ, JC_STICK_FLAT);
-		input_set_abs_params(ctlr->input, ABS_RY,
-				     -JC_MAX_STICK_MAG, JC_MAX_STICK_MAG,
-				     JC_STICK_FUZZ, JC_STICK_FLAT);
-
-		for (i = 0; joycon_button_inputs_r[i] > 0; i++)
-			input_set_capability(ctlr->input, EV_KEY,
-					     joycon_button_inputs_r[i]);
-	}
+static void joycon_config_buttons(struct input_dev *idev,
+		 const struct joycon_ctlr_button_mapping button_mappings[])
+{
+	const struct joycon_ctlr_button_mapping *button;
 
-	/* Let's report joy-con S triggers separately */
-	if (hdev->product == USB_DEVICE_ID_NINTENDO_JOYCONL) {
-		input_set_capability(ctlr->input, EV_KEY, BTN_TR);
-		input_set_capability(ctlr->input, EV_KEY, BTN_TR2);
-	} else if (hdev->product == USB_DEVICE_ID_NINTENDO_JOYCONR) {
-		input_set_capability(ctlr->input, EV_KEY, BTN_TL);
-		input_set_capability(ctlr->input, EV_KEY, BTN_TL2);
-	}
+	for (button = button_mappings; button->code; button++)
+		input_set_capability(idev, EV_KEY, button->code);
+}
 
+static void joycon_config_rumble(struct joycon_ctlr *ctlr)
+{
 #if IS_ENABLED(CONFIG_NINTENDO_FF)
 	/* set up rumble */
 	input_set_capability(ctlr->input, EV_FF, FF_RUMBLE);
@@ -1826,10 +2103,15 @@ static int joycon_input_create(struct joycon_ctlr *ctlr)
 	joycon_set_rumble(ctlr, 0, 0, false);
 	ctlr->rumble_msecs = jiffies_to_msecs(jiffies);
 #endif
+}
 
-	ret = input_register_device(ctlr->input);
-	if (ret)
-		return ret;
+static int joycon_imu_input_create(struct joycon_ctlr *ctlr)
+{
+	struct hid_device *hdev;
+	const char *imu_name;
+	int ret;
+
+	hdev = ctlr->hdev;
 
 	/* configure the imu input device */
 	ctlr->imu_input = devm_input_allocate_device(&hdev->dev);
@@ -1841,8 +2123,14 @@ static int joycon_input_create(struct joycon_ctlr *ctlr)
 	ctlr->imu_input->id.product = hdev->product;
 	ctlr->imu_input->id.version = hdev->version;
 	ctlr->imu_input->uniq = ctlr->mac_addr_str;
-	ctlr->imu_input->name = imu_name;
 	ctlr->imu_input->phys = hdev->phys;
+
+	imu_name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "%s (IMU)", ctlr->input->name);
+	if (!imu_name)
+		return -ENOMEM;
+
+	ctlr->imu_input->name = imu_name;
+
 	input_set_drvdata(ctlr->imu_input, ctlr);
 
 	/* configure imu axes */
@@ -1884,6 +2172,71 @@ static int joycon_input_create(struct joycon_ctlr *ctlr)
 	return 0;
 }
 
+static int joycon_input_create(struct joycon_ctlr *ctlr)
+{
+	struct hid_device *hdev;
+	int ret;
+
+	hdev = ctlr->hdev;
+
+	ctlr->input = devm_input_allocate_device(&hdev->dev);
+	if (!ctlr->input)
+		return -ENOMEM;
+	ctlr->input->id.bustype = hdev->bus;
+	ctlr->input->id.vendor = hdev->vendor;
+	ctlr->input->id.product = hdev->product;
+	ctlr->input->id.version = hdev->version;
+	ctlr->input->uniq = ctlr->mac_addr_str;
+	ctlr->input->name = hdev->name;
+	ctlr->input->phys = hdev->phys;
+	input_set_drvdata(ctlr->input, ctlr);
+
+	ret = input_register_device(ctlr->input);
+	if (ret)
+		return ret;
+
+	if (joycon_type_is_right_joycon(ctlr)) {
+		joycon_config_right_stick(ctlr->input);
+		joycon_config_buttons(ctlr->input, right_joycon_button_mappings);
+		if (!joycon_device_is_chrggrip(ctlr))
+			joycon_config_buttons(ctlr->input, right_joycon_s_button_mappings);
+	} else if (joycon_type_is_left_joycon(ctlr)) {
+		joycon_config_left_stick(ctlr->input);
+		joycon_config_buttons(ctlr->input, left_joycon_button_mappings);
+		if (!joycon_device_is_chrggrip(ctlr))
+			joycon_config_buttons(ctlr->input, left_joycon_s_button_mappings);
+	} else if (joycon_type_is_procon(ctlr)) {
+		joycon_config_left_stick(ctlr->input);
+		joycon_config_right_stick(ctlr->input);
+		joycon_config_dpad(ctlr->input);
+		joycon_config_buttons(ctlr->input, procon_button_mappings);
+	} else if (joycon_type_is_any_nescon(ctlr)) {
+		joycon_config_dpad(ctlr->input);
+		joycon_config_buttons(ctlr->input, nescon_button_mappings);
+	} else if (joycon_type_is_snescon(ctlr)) {
+		joycon_config_dpad(ctlr->input);
+		joycon_config_buttons(ctlr->input, snescon_button_mappings);
+	} else if (joycon_type_is_gencon(ctlr)) {
+		joycon_config_dpad(ctlr->input);
+		joycon_config_buttons(ctlr->input, gencon_button_mappings);
+	} else if (joycon_type_is_n64con(ctlr)) {
+		joycon_config_dpad(ctlr->input);
+		joycon_config_left_stick(ctlr->input);
+		joycon_config_buttons(ctlr->input, n64con_button_mappings);
+	}
+
+	if (joycon_has_imu(ctlr)) {
+		ret = joycon_imu_input_create(ctlr);
+		if (ret)
+			return ret;
+	}
+
+	if (joycon_has_rumble(ctlr))
+		joycon_config_rumble(ctlr);
+
+	return 0;
+}
+
 /* Because the subcommand sets all the leds at once, the brightness argument is ignored */
 static int joycon_player_led_brightness_set(struct led_classdev *led,
 					    enum led_brightness brightness)
@@ -2120,9 +2473,7 @@ static int joycon_read_info(struct joycon_ctlr *ctlr)
 	struct joycon_input_report *report;
 
 	req.subcmd_id = JC_SUBCMD_REQ_DEV_INFO;
-	mutex_lock(&ctlr->output_mutex);
 	ret = joycon_send_subcmd(ctlr, &req, 0, HZ);
-	mutex_unlock(&ctlr->output_mutex);
 	if (ret) {
 		hid_err(ctlr->hdev, "Failed to get joycon info; ret=%d\n", ret);
 		return ret;
@@ -2145,8 +2496,17 @@ static int joycon_read_info(struct joycon_ctlr *ctlr)
 		return -ENOMEM;
 	hid_info(ctlr->hdev, "controller MAC = %s\n", ctlr->mac_addr_str);
 
-	/* Retrieve the type so we can distinguish for charging grip */
+	/*
+	 * Retrieve the type so we can distinguish the controller type
+	 * Unfortantly the hdev->product can't always be used due to a ?bug?
+	 * with the NSO Genesis controller. Over USB, it will report the
+	 * PID as 0x201E, but over bluetooth it will report the PID as 0x2017
+	 * which is the same as the NSO SNES controller. This is different from
+	 * the rest of the controllers which will report the same PID over USB
+	 * and bluetooth.
+	 */
 	ctlr->ctlr_type = report->subcmd_reply.data[2];
+	hid_dbg(ctlr->hdev, "controller type = 0x%02X\n", ctlr->ctlr_type);
 
 	return 0;
 }
@@ -2158,8 +2518,7 @@ static int joycon_init(struct hid_device *hdev)
 
 	mutex_lock(&ctlr->output_mutex);
 	/* if handshake command fails, assume ble pro controller */
-	if ((jc_type_is_procon(ctlr) || jc_type_is_chrggrip(ctlr)) &&
-	    !joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ)) {
+	if (joycon_using_usb(ctlr) && !joycon_send_usb(ctlr, JC_USB_CMD_HANDSHAKE, HZ)) {
 		hid_dbg(hdev, "detected USB controller\n");
 		/* set baudrate for improved latency */
 		ret = joycon_send_usb(ctlr, JC_USB_CMD_BAUDRATE_3M, HZ);
@@ -2184,24 +2543,43 @@ static int joycon_init(struct hid_device *hdev)
 		goto out_unlock;
 	}
 
-	/* get controller calibration data, and parse it */
-	ret = joycon_request_calibration(ctlr);
+	/* needed to retrieve the controller type */
+	ret = joycon_read_info(ctlr);
 	if (ret) {
-		/*
-		 * We can function with default calibration, but it may be
-		 * inaccurate. Provide a warning, and continue on.
-		 */
-		hid_warn(hdev, "Analog stick positions may be inaccurate\n");
+		hid_err(hdev, "Failed to retrieve controller info; ret=%d\n",
+			ret);
+		goto out_unlock;
 	}
 
-	/* get IMU calibration data, and parse it */
-	ret = joycon_request_imu_calibration(ctlr);
-	if (ret) {
-		/*
-		 * We can function with default calibration, but it may be
-		 * inaccurate. Provide a warning, and continue on.
-		 */
-		hid_warn(hdev, "Unable to read IMU calibration data\n");
+	if (joycon_has_joysticks(ctlr)) {
+		/* get controller calibration data, and parse it */
+		ret = joycon_request_calibration(ctlr);
+		if (ret) {
+			/*
+			 * We can function with default calibration, but it may be
+			 * inaccurate. Provide a warning, and continue on.
+			 */
+			hid_warn(hdev, "Analog stick positions may be inaccurate\n");
+		}
+	}
+
+	if (joycon_has_imu(ctlr)) {
+		/* get IMU calibration data, and parse it */
+		ret = joycon_request_imu_calibration(ctlr);
+		if (ret) {
+			/*
+			 * We can function with default calibration, but it may be
+			 * inaccurate. Provide a warning, and continue on.
+			 */
+			hid_warn(hdev, "Unable to read IMU calibration data\n");
+		}
+
+		/* Enable the IMU */
+		ret = joycon_enable_imu(ctlr);
+		if (ret) {
+			hid_err(hdev, "Failed to enable the IMU; ret=%d\n", ret);
+			goto out_unlock;
+		}
 	}
 
 	/* Set the reporting mode to 0x30, which is the full report mode */
@@ -2211,18 +2589,13 @@ static int joycon_init(struct hid_device *hdev)
 		goto out_unlock;
 	}
 
-	/* Enable rumble */
-	ret = joycon_enable_rumble(ctlr);
-	if (ret) {
-		hid_err(hdev, "Failed to enable rumble; ret=%d\n", ret);
-		goto out_unlock;
-	}
-
-	/* Enable the IMU */
-	ret = joycon_enable_imu(ctlr);
-	if (ret) {
-		hid_err(hdev, "Failed to enable the IMU; ret=%d\n", ret);
-		goto out_unlock;
+	if (joycon_has_rumble(ctlr)) {
+		/* Enable rumble */
+		ret = joycon_enable_rumble(ctlr);
+		if (ret) {
+			hid_err(hdev, "Failed to enable rumble; ret=%d\n", ret);
+			goto out_unlock;
+		}
 	}
 
 out_unlock:
@@ -2367,13 +2740,6 @@ static int nintendo_hid_probe(struct hid_device *hdev,
 		goto err_close;
 	}
 
-	ret = joycon_read_info(ctlr);
-	if (ret) {
-		hid_err(hdev, "Failed to retrieve controller info; ret=%d\n",
-			ret);
-		goto err_close;
-	}
-
 	/* Initialize the leds */
 	ret = joycon_leds_create(ctlr);
 	if (ret) {
@@ -2445,6 +2811,12 @@ static int nintendo_hid_resume(struct hid_device *hdev)
 static const struct hid_device_id nintendo_hid_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
 			 USB_DEVICE_ID_NINTENDO_PROCON) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+			 USB_DEVICE_ID_NINTENDO_SNESCON) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+			 USB_DEVICE_ID_NINTENDO_GENCON) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
+			 USB_DEVICE_ID_NINTENDO_N64CON) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
 			 USB_DEVICE_ID_NINTENDO_PROCON) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NINTENDO,
@@ -2453,6 +2825,12 @@ static const struct hid_device_id nintendo_hid_devices[] = {
 			 USB_DEVICE_ID_NINTENDO_JOYCONL) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
 			 USB_DEVICE_ID_NINTENDO_JOYCONR) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
+			 USB_DEVICE_ID_NINTENDO_SNESCON) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
+			 USB_DEVICE_ID_NINTENDO_GENCON) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_NINTENDO,
+			 USB_DEVICE_ID_NINTENDO_N64CON) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, nintendo_hid_devices);
@@ -2471,6 +2849,7 @@ static struct hid_driver nintendo_hid_driver = {
 module_hid_driver(nintendo_hid_driver);
 
 MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ryan McClelland <rymcclel@gmail.com>");
+MODULE_AUTHOR("Emily Strickland <linux@emily.st>");
 MODULE_AUTHOR("Daniel J. Ogorchock <djogorchock@gmail.com>");
 MODULE_DESCRIPTION("Driver for Nintendo Switch Controllers");
-
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index 2eba152e8b9053..26e93a331a5107 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -632,7 +632,7 @@ static int sensor_hub_probe(struct hid_device *hdev,
 	}
 	INIT_LIST_HEAD(&hdev->inputs);
 
-	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT | HID_CONNECT_DRIVER);
 	if (ret) {
 		hid_err(hdev, "hw start failed\n");
 		return ret;
diff --git a/drivers/hid/hid-steam.c b/drivers/hid/hid-steam.c
index b110818fc94586..b3c4e50e248aa7 100644
--- a/drivers/hid/hid-steam.c
+++ b/drivers/hid/hid-steam.c
@@ -71,60 +71,222 @@ static LIST_HEAD(steam_devices);
 
 /*
  * Commands that can be sent in a feature report.
- * Thanks to Valve for some valuable hints.
+ * Thanks to Valve and SDL for the names.
  */
-#define STEAM_CMD_SET_MAPPINGS		0x80
-#define STEAM_CMD_CLEAR_MAPPINGS	0x81
-#define STEAM_CMD_GET_MAPPINGS		0x82
-#define STEAM_CMD_GET_ATTRIB		0x83
-#define STEAM_CMD_GET_ATTRIB_LABEL	0x84
-#define STEAM_CMD_DEFAULT_MAPPINGS	0x85
-#define STEAM_CMD_FACTORY_RESET		0x86
-#define STEAM_CMD_WRITE_REGISTER	0x87
-#define STEAM_CMD_CLEAR_REGISTER	0x88
-#define STEAM_CMD_READ_REGISTER		0x89
-#define STEAM_CMD_GET_REGISTER_LABEL	0x8a
-#define STEAM_CMD_GET_REGISTER_MAX	0x8b
-#define STEAM_CMD_GET_REGISTER_DEFAULT	0x8c
-#define STEAM_CMD_SET_MODE		0x8d
-#define STEAM_CMD_DEFAULT_MOUSE		0x8e
-#define STEAM_CMD_FORCEFEEDBAK		0x8f
-#define STEAM_CMD_REQUEST_COMM_STATUS	0xb4
-#define STEAM_CMD_GET_SERIAL		0xae
-#define STEAM_CMD_HAPTIC_RUMBLE		0xeb
-
-/* Some useful register ids */
-#define STEAM_REG_LPAD_MODE		0x07
-#define STEAM_REG_RPAD_MODE		0x08
-#define STEAM_REG_RPAD_MARGIN		0x18
-#define STEAM_REG_LED			0x2d
-#define STEAM_REG_GYRO_MODE		0x30
-#define STEAM_REG_LPAD_CLICK_PRESSURE	0x34
-#define STEAM_REG_RPAD_CLICK_PRESSURE	0x35
-
-/* Raw event identifiers */
-#define STEAM_EV_INPUT_DATA		0x01
-#define STEAM_EV_CONNECT		0x03
-#define STEAM_EV_BATTERY		0x04
-#define STEAM_EV_DECK_INPUT_DATA	0x09
+enum {
+	ID_SET_DIGITAL_MAPPINGS		= 0x80,
+	ID_CLEAR_DIGITAL_MAPPINGS	= 0x81,
+	ID_GET_DIGITAL_MAPPINGS		= 0x82,
+	ID_GET_ATTRIBUTES_VALUES	= 0x83,
+	ID_GET_ATTRIBUTE_LABEL		= 0x84,
+	ID_SET_DEFAULT_DIGITAL_MAPPINGS	= 0x85,
+	ID_FACTORY_RESET		= 0x86,
+	ID_SET_SETTINGS_VALUES		= 0x87,
+	ID_CLEAR_SETTINGS_VALUES	= 0x88,
+	ID_GET_SETTINGS_VALUES		= 0x89,
+	ID_GET_SETTING_LABEL		= 0x8A,
+	ID_GET_SETTINGS_MAXS		= 0x8B,
+	ID_GET_SETTINGS_DEFAULTS	= 0x8C,
+	ID_SET_CONTROLLER_MODE		= 0x8D,
+	ID_LOAD_DEFAULT_SETTINGS	= 0x8E,
+	ID_TRIGGER_HAPTIC_PULSE		= 0x8F,
+	ID_TURN_OFF_CONTROLLER		= 0x9F,
+
+	ID_GET_DEVICE_INFO		= 0xA1,
+
+	ID_CALIBRATE_TRACKPADS		= 0xA7,
+	ID_RESERVED_0			= 0xA8,
+	ID_SET_SERIAL_NUMBER		= 0xA9,
+	ID_GET_TRACKPAD_CALIBRATION	= 0xAA,
+	ID_GET_TRACKPAD_FACTORY_CALIBRATION = 0xAB,
+	ID_GET_TRACKPAD_RAW_DATA	= 0xAC,
+	ID_ENABLE_PAIRING		= 0xAD,
+	ID_GET_STRING_ATTRIBUTE		= 0xAE,
+	ID_RADIO_ERASE_RECORDS		= 0xAF,
+	ID_RADIO_WRITE_RECORD		= 0xB0,
+	ID_SET_DONGLE_SETTING		= 0xB1,
+	ID_DONGLE_DISCONNECT_DEVICE	= 0xB2,
+	ID_DONGLE_COMMIT_DEVICE		= 0xB3,
+	ID_DONGLE_GET_WIRELESS_STATE	= 0xB4,
+	ID_CALIBRATE_GYRO		= 0xB5,
+	ID_PLAY_AUDIO			= 0xB6,
+	ID_AUDIO_UPDATE_START		= 0xB7,
+	ID_AUDIO_UPDATE_DATA		= 0xB8,
+	ID_AUDIO_UPDATE_COMPLETE	= 0xB9,
+	ID_GET_CHIPID			= 0xBA,
+
+	ID_CALIBRATE_JOYSTICK		= 0xBF,
+	ID_CALIBRATE_ANALOG_TRIGGERS	= 0xC0,
+	ID_SET_AUDIO_MAPPING		= 0xC1,
+	ID_CHECK_GYRO_FW_LOAD		= 0xC2,
+	ID_CALIBRATE_ANALOG		= 0xC3,
+	ID_DONGLE_GET_CONNECTED_SLOTS	= 0xC4,
+
+	ID_RESET_IMU			= 0xCE,
+
+	ID_TRIGGER_HAPTIC_CMD		= 0xEA,
+	ID_TRIGGER_RUMBLE_CMD		= 0xEB,
+};
+
+/* Settings IDs */
+enum {
+	/* 0 */
+	SETTING_MOUSE_SENSITIVITY,
+	SETTING_MOUSE_ACCELERATION,
+	SETTING_TRACKBALL_ROTATION_ANGLE,
+	SETTING_HAPTIC_INTENSITY_UNUSED,
+	SETTING_LEFT_GAMEPAD_STICK_ENABLED,
+	SETTING_RIGHT_GAMEPAD_STICK_ENABLED,
+	SETTING_USB_DEBUG_MODE,
+	SETTING_LEFT_TRACKPAD_MODE,
+	SETTING_RIGHT_TRACKPAD_MODE,
+	SETTING_MOUSE_POINTER_ENABLED,
+
+	/* 10 */
+	SETTING_DPAD_DEADZONE,
+	SETTING_MINIMUM_MOMENTUM_VEL,
+	SETTING_MOMENTUM_DECAY_AMMOUNT,
+	SETTING_TRACKPAD_RELATIVE_MODE_TICKS_PER_PIXEL,
+	SETTING_HAPTIC_INCREMENT,
+	SETTING_DPAD_ANGLE_SIN,
+	SETTING_DPAD_ANGLE_COS,
+	SETTING_MOMENTUM_VERTICAL_DIVISOR,
+	SETTING_MOMENTUM_MAXIMUM_VELOCITY,
+	SETTING_TRACKPAD_Z_ON,
+
+	/* 20 */
+	SETTING_TRACKPAD_Z_OFF,
+	SETTING_SENSITIVY_SCALE_AMMOUNT,
+	SETTING_LEFT_TRACKPAD_SECONDARY_MODE,
+	SETTING_RIGHT_TRACKPAD_SECONDARY_MODE,
+	SETTING_SMOOTH_ABSOLUTE_MOUSE,
+	SETTING_STEAMBUTTON_POWEROFF_TIME,
+	SETTING_UNUSED_1,
+	SETTING_TRACKPAD_OUTER_RADIUS,
+	SETTING_TRACKPAD_Z_ON_LEFT,
+	SETTING_TRACKPAD_Z_OFF_LEFT,
+
+	/* 30 */
+	SETTING_TRACKPAD_OUTER_SPIN_VEL,
+	SETTING_TRACKPAD_OUTER_SPIN_RADIUS,
+	SETTING_TRACKPAD_OUTER_SPIN_HORIZONTAL_ONLY,
+	SETTING_TRACKPAD_RELATIVE_MODE_DEADZONE,
+	SETTING_TRACKPAD_RELATIVE_MODE_MAX_VEL,
+	SETTING_TRACKPAD_RELATIVE_MODE_INVERT_Y,
+	SETTING_TRACKPAD_DOUBLE_TAP_BEEP_ENABLED,
+	SETTING_TRACKPAD_DOUBLE_TAP_BEEP_PERIOD,
+	SETTING_TRACKPAD_DOUBLE_TAP_BEEP_COUNT,
+	SETTING_TRACKPAD_OUTER_RADIUS_RELEASE_ON_TRANSITION,
+
+	/* 40 */
+	SETTING_RADIAL_MODE_ANGLE,
+	SETTING_HAPTIC_INTENSITY_MOUSE_MODE,
+	SETTING_LEFT_DPAD_REQUIRES_CLICK,
+	SETTING_RIGHT_DPAD_REQUIRES_CLICK,
+	SETTING_LED_BASELINE_BRIGHTNESS,
+	SETTING_LED_USER_BRIGHTNESS,
+	SETTING_ENABLE_RAW_JOYSTICK,
+	SETTING_ENABLE_FAST_SCAN,
+	SETTING_IMU_MODE,
+	SETTING_WIRELESS_PACKET_VERSION,
+
+	/* 50 */
+	SETTING_SLEEP_INACTIVITY_TIMEOUT,
+	SETTING_TRACKPAD_NOISE_THRESHOLD,
+	SETTING_LEFT_TRACKPAD_CLICK_PRESSURE,
+	SETTING_RIGHT_TRACKPAD_CLICK_PRESSURE,
+	SETTING_LEFT_BUMPER_CLICK_PRESSURE,
+	SETTING_RIGHT_BUMPER_CLICK_PRESSURE,
+	SETTING_LEFT_GRIP_CLICK_PRESSURE,
+	SETTING_RIGHT_GRIP_CLICK_PRESSURE,
+	SETTING_LEFT_GRIP2_CLICK_PRESSURE,
+	SETTING_RIGHT_GRIP2_CLICK_PRESSURE,
+
+	/* 60 */
+	SETTING_PRESSURE_MODE,
+	SETTING_CONTROLLER_TEST_MODE,
+	SETTING_TRIGGER_MODE,
+	SETTING_TRACKPAD_Z_THRESHOLD,
+	SETTING_FRAME_RATE,
+	SETTING_TRACKPAD_FILT_CTRL,
+	SETTING_TRACKPAD_CLIP,
+	SETTING_DEBUG_OUTPUT_SELECT,
+	SETTING_TRIGGER_THRESHOLD_PERCENT,
+	SETTING_TRACKPAD_FREQUENCY_HOPPING,
+
+	/* 70 */
+	SETTING_HAPTICS_ENABLED,
+	SETTING_STEAM_WATCHDOG_ENABLE,
+	SETTING_TIMP_TOUCH_THRESHOLD_ON,
+	SETTING_TIMP_TOUCH_THRESHOLD_OFF,
+	SETTING_FREQ_HOPPING,
+	SETTING_TEST_CONTROL,
+	SETTING_HAPTIC_MASTER_GAIN_DB,
+	SETTING_THUMB_TOUCH_THRESH,
+	SETTING_DEVICE_POWER_STATUS,
+	SETTING_HAPTIC_INTENSITY,
+
+	/* 80 */
+	SETTING_STABILIZER_ENABLED,
+	SETTING_TIMP_MODE_MTE,
+};
+
+/* Input report identifiers */
+enum
+{
+	ID_CONTROLLER_STATE = 1,
+	ID_CONTROLLER_DEBUG = 2,
+	ID_CONTROLLER_WIRELESS = 3,
+	ID_CONTROLLER_STATUS = 4,
+	ID_CONTROLLER_DEBUG2 = 5,
+	ID_CONTROLLER_SECONDARY_STATE = 6,
+	ID_CONTROLLER_BLE_STATE = 7,
+	ID_CONTROLLER_DECK_STATE = 9
+};
+
+/* String attribute idenitifiers */
+enum {
+	ATTRIB_STR_BOARD_SERIAL,
+	ATTRIB_STR_UNIT_SERIAL,
+};
 
 /* Values for GYRO_MODE (bitmask) */
-#define STEAM_GYRO_MODE_OFF		0x0000
-#define STEAM_GYRO_MODE_STEERING	0x0001
-#define STEAM_GYRO_MODE_TILT		0x0002
-#define STEAM_GYRO_MODE_SEND_ORIENTATION	0x0004
-#define STEAM_GYRO_MODE_SEND_RAW_ACCEL		0x0008
-#define STEAM_GYRO_MODE_SEND_RAW_GYRO		0x0010
+enum {
+	SETTING_GYRO_MODE_OFF			= 0,
+	SETTING_GYRO_MODE_STEERING		= BIT(0),
+	SETTING_GYRO_MODE_TILT			= BIT(1),
+	SETTING_GYRO_MODE_SEND_ORIENTATION	= BIT(2),
+	SETTING_GYRO_MODE_SEND_RAW_ACCEL	= BIT(3),
+	SETTING_GYRO_MODE_SEND_RAW_GYRO		= BIT(4),
+};
+
+/* Trackpad modes */
+enum {
+	TRACKPAD_ABSOLUTE_MOUSE,
+	TRACKPAD_RELATIVE_MOUSE,
+	TRACKPAD_DPAD_FOUR_WAY_DISCRETE,
+	TRACKPAD_DPAD_FOUR_WAY_OVERLAP,
+	TRACKPAD_DPAD_EIGHT_WAY,
+	TRACKPAD_RADIAL_MODE,
+	TRACKPAD_ABSOLUTE_DPAD,
+	TRACKPAD_NONE,
+	TRACKPAD_GESTURE_KEYBOARD,
+};
+
+/* Pad identifiers for the deck */
+#define STEAM_PAD_LEFT 0
+#define STEAM_PAD_RIGHT 1
+#define STEAM_PAD_BOTH 2
 
 /* Other random constants */
-#define STEAM_SERIAL_LEN 10
+#define STEAM_SERIAL_LEN 0x15
 
 struct steam_device {
 	struct list_head list;
 	spinlock_t lock;
 	struct hid_device *hdev, *client_hdev;
-	struct mutex mutex;
-	bool client_opened;
+	struct mutex report_mutex;
+	unsigned long client_opened;
 	struct input_dev __rcu *input;
 	unsigned long quirks;
 	struct work_struct work_connect;
@@ -134,7 +296,9 @@ struct steam_device {
 	struct power_supply __rcu *battery;
 	u8 battery_charge;
 	u16 voltage;
-	struct delayed_work heartbeat;
+	struct delayed_work mode_switch;
+	bool did_mode_switch;
+	bool gamepad_mode;
 	struct work_struct rumble_work;
 	u16 rumble_left;
 	u16 rumble_right;
@@ -226,13 +390,13 @@ static inline int steam_send_report_byte(struct steam_device *steam, u8 cmd)
 	return steam_send_report(steam, &cmd, 1);
 }
 
-static int steam_write_registers(struct steam_device *steam,
+static int steam_write_settings(struct steam_device *steam,
 		/* u8 reg, u16 val */...)
 {
 	/* Send: 0x87 len (reg valLo valHi)* */
 	u8 reg;
 	u16 val;
-	u8 cmd[64] = {STEAM_CMD_WRITE_REGISTER, 0x00};
+	u8 cmd[64] = {ID_SET_SETTINGS_VALUES, 0x00};
 	int ret;
 	va_list args;
 
@@ -265,23 +429,29 @@ static int steam_get_serial(struct steam_device *steam)
 {
 	/*
 	 * Send: 0xae 0x15 0x01
-	 * Recv: 0xae 0x15 0x01 serialnumber (10 chars)
+	 * Recv: 0xae 0x15 0x01 serialnumber
 	 */
-	int ret;
-	u8 cmd[] = {STEAM_CMD_GET_SERIAL, 0x15, 0x01};
+	int ret = 0;
+	u8 cmd[] = {ID_GET_STRING_ATTRIBUTE, sizeof(steam->serial_no), ATTRIB_STR_UNIT_SERIAL};
 	u8 reply[3 + STEAM_SERIAL_LEN + 1];
 
+	mutex_lock(&steam->report_mutex);
 	ret = steam_send_report(steam, cmd, sizeof(cmd));
 	if (ret < 0)
-		return ret;
+		goto out;
 	ret = steam_recv_report(steam, reply, sizeof(reply));
 	if (ret < 0)
-		return ret;
-	if (reply[0] != 0xae || reply[1] != 0x15 || reply[2] != 0x01)
-		return -EIO;
+		goto out;
+	if (reply[0] != ID_GET_STRING_ATTRIBUTE || reply[1] < 1 ||
+	    reply[1] > sizeof(steam->serial_no) || reply[2] != ATTRIB_STR_UNIT_SERIAL) {
+		ret = -EIO;
+		goto out;
+	}
 	reply[3 + STEAM_SERIAL_LEN] = 0;
-	strscpy(steam->serial_no, reply + 3, sizeof(steam->serial_no));
-	return 0;
+	strscpy(steam->serial_no, reply + 3, reply[1]);
+out:
+	mutex_unlock(&steam->report_mutex);
+	return ret;
 }
 
 /*
@@ -291,14 +461,50 @@ static int steam_get_serial(struct steam_device *steam)
  */
 static inline int steam_request_conn_status(struct steam_device *steam)
 {
-	return steam_send_report_byte(steam, STEAM_CMD_REQUEST_COMM_STATUS);
+	int ret;
+	mutex_lock(&steam->report_mutex);
+	ret = steam_send_report_byte(steam, ID_DONGLE_GET_WIRELESS_STATE);
+	mutex_unlock(&steam->report_mutex);
+	return ret;
+}
+
+/*
+ * Send a haptic pulse to the trackpads
+ * Duration and interval are measured in microseconds, count is the number
+ * of pulses to send for duration time with interval microseconds between them
+ * and gain is measured in decibels, ranging from -24 to +6
+ */
+static inline int steam_haptic_pulse(struct steam_device *steam, u8 pad,
+				u16 duration, u16 interval, u16 count, u8 gain)
+{
+	int ret;
+	u8 report[10] = {ID_TRIGGER_HAPTIC_PULSE, 8};
+
+	/* Left and right are swapped on this report for legacy reasons */
+	if (pad < STEAM_PAD_BOTH)
+		pad ^= 1;
+
+	report[2] = pad;
+	report[3] = duration & 0xFF;
+	report[4] = duration >> 8;
+	report[5] = interval & 0xFF;
+	report[6] = interval >> 8;
+	report[7] = count & 0xFF;
+	report[8] = count >> 8;
+	report[9] = gain;
+
+	mutex_lock(&steam->report_mutex);
+	ret = steam_send_report(steam, report, sizeof(report));
+	mutex_unlock(&steam->report_mutex);
+	return ret;
 }
 
 static inline int steam_haptic_rumble(struct steam_device *steam,
 				u16 intensity, u16 left_speed, u16 right_speed,
 				u8 left_gain, u8 right_gain)
 {
-	u8 report[11] = {STEAM_CMD_HAPTIC_RUMBLE, 9};
+	int ret;
+	u8 report[11] = {ID_TRIGGER_RUMBLE_CMD, 9};
 
 	report[3] = intensity & 0xFF;
 	report[4] = intensity >> 8;
@@ -309,7 +515,10 @@ static inline int steam_haptic_rumble(struct steam_device *steam,
 	report[9] = left_gain;
 	report[10] = right_gain;
 
-	return steam_send_report(steam, report, sizeof(report));
+	mutex_lock(&steam->report_mutex);
+	ret = steam_send_report(steam, report, sizeof(report));
+	mutex_unlock(&steam->report_mutex);
+	return ret;
 }
 
 static void steam_haptic_rumble_cb(struct work_struct *work)
@@ -335,40 +544,36 @@ static int steam_play_effect(struct input_dev *dev, void *data,
 
 static void steam_set_lizard_mode(struct steam_device *steam, bool enable)
 {
+	if (steam->gamepad_mode)
+		enable = false;
+
 	if (enable) {
+		mutex_lock(&steam->report_mutex);
 		/* enable esc, enter, cursors */
-		steam_send_report_byte(steam, STEAM_CMD_DEFAULT_MAPPINGS);
-		/* enable mouse */
-		steam_send_report_byte(steam, STEAM_CMD_DEFAULT_MOUSE);
-		steam_write_registers(steam,
-			STEAM_REG_RPAD_MARGIN, 0x01, /* enable margin */
-			0);
-
-		cancel_delayed_work_sync(&steam->heartbeat);
+		steam_send_report_byte(steam, ID_SET_DEFAULT_DIGITAL_MAPPINGS);
+		/* reset settings */
+		steam_send_report_byte(steam, ID_LOAD_DEFAULT_SETTINGS);
+		mutex_unlock(&steam->report_mutex);
 	} else {
+		mutex_lock(&steam->report_mutex);
 		/* disable esc, enter, cursor */
-		steam_send_report_byte(steam, STEAM_CMD_CLEAR_MAPPINGS);
+		steam_send_report_byte(steam, ID_CLEAR_DIGITAL_MAPPINGS);
 
 		if (steam->quirks & STEAM_QUIRK_DECK) {
-			steam_write_registers(steam,
-				STEAM_REG_RPAD_MARGIN, 0x00, /* disable margin */
-				STEAM_REG_LPAD_MODE, 0x07, /* disable mouse */
-				STEAM_REG_RPAD_MODE, 0x07, /* disable mouse */
-				STEAM_REG_LPAD_CLICK_PRESSURE, 0xFFFF, /* disable clicky pad */
-				STEAM_REG_RPAD_CLICK_PRESSURE, 0xFFFF, /* disable clicky pad */
+			steam_write_settings(steam,
+				SETTING_LEFT_TRACKPAD_MODE, TRACKPAD_NONE, /* disable mouse */
+				SETTING_RIGHT_TRACKPAD_MODE, TRACKPAD_NONE, /* disable mouse */
+				SETTING_LEFT_TRACKPAD_CLICK_PRESSURE, 0xFFFF, /* disable haptic click */
+				SETTING_RIGHT_TRACKPAD_CLICK_PRESSURE, 0xFFFF, /* disable haptic click */
+				SETTING_STEAM_WATCHDOG_ENABLE, 0, /* disable watchdog that tests if Steam is active */
 				0);
-			/*
-			 * The Steam Deck has a watchdog that automatically enables
-			 * lizard mode if it doesn't see any traffic for too long
-			 */
-			if (!work_busy(&steam->heartbeat.work))
-				schedule_delayed_work(&steam->heartbeat, 5 * HZ);
+			mutex_unlock(&steam->report_mutex);
 		} else {
-			steam_write_registers(steam,
-				STEAM_REG_RPAD_MARGIN, 0x00, /* disable margin */
-				STEAM_REG_LPAD_MODE, 0x07, /* disable mouse */
-				STEAM_REG_RPAD_MODE, 0x07, /* disable mouse */
+			steam_write_settings(steam,
+				SETTING_LEFT_TRACKPAD_MODE, TRACKPAD_NONE, /* disable mouse */
+				SETTING_RIGHT_TRACKPAD_MODE, TRACKPAD_NONE, /* disable mouse */
 				0);
+			mutex_unlock(&steam->report_mutex);
 		}
 	}
 }
@@ -376,22 +581,38 @@ static void steam_set_lizard_mode(struct steam_device *steam, bool enable)
 static int steam_input_open(struct input_dev *dev)
 {
 	struct steam_device *steam = input_get_drvdata(dev);
+	unsigned long flags;
+	bool set_lizard_mode;
+
+	/*
+	 * Disabling lizard mode automatically is only done on the Steam
+	 * Controller. On the Steam Deck, this is toggled manually by holding
+	 * the options button instead, handled by steam_mode_switch_cb.
+	 */
+	if (!(steam->quirks & STEAM_QUIRK_DECK)) {
+		spin_lock_irqsave(&steam->lock, flags);
+		set_lizard_mode = !steam->client_opened && lizard_mode;
+		spin_unlock_irqrestore(&steam->lock, flags);
+		if (set_lizard_mode)
+			steam_set_lizard_mode(steam, false);
+	}
 
-	mutex_lock(&steam->mutex);
-	if (!steam->client_opened && lizard_mode)
-		steam_set_lizard_mode(steam, false);
-	mutex_unlock(&steam->mutex);
 	return 0;
 }
 
 static void steam_input_close(struct input_dev *dev)
 {
 	struct steam_device *steam = input_get_drvdata(dev);
+	unsigned long flags;
+	bool set_lizard_mode;
 
-	mutex_lock(&steam->mutex);
-	if (!steam->client_opened && lizard_mode)
-		steam_set_lizard_mode(steam, true);
-	mutex_unlock(&steam->mutex);
+	if (!(steam->quirks & STEAM_QUIRK_DECK)) {
+		spin_lock_irqsave(&steam->lock, flags);
+		set_lizard_mode = !steam->client_opened && lizard_mode;
+		spin_unlock_irqrestore(&steam->lock, flags);
+		if (set_lizard_mode)
+			steam_set_lizard_mode(steam, true);
+	}
 }
 
 static enum power_supply_property steam_battery_props[] = {
@@ -635,7 +856,8 @@ static void steam_battery_unregister(struct steam_device *steam)
 static int steam_register(struct steam_device *steam)
 {
 	int ret;
-	bool client_opened;
+	unsigned long client_opened;
+	unsigned long flags;
 
 	/*
 	 * This function can be called several times in a row with the
@@ -648,11 +870,9 @@ static int steam_register(struct steam_device *steam)
 		 * Unlikely, but getting the serial could fail, and it is not so
 		 * important, so make up a serial number and go on.
 		 */
-		mutex_lock(&steam->mutex);
 		if (steam_get_serial(steam) < 0)
 			strscpy(steam->serial_no, "XXXXXXXXXX",
 					sizeof(steam->serial_no));
-		mutex_unlock(&steam->mutex);
 
 		hid_info(steam->hdev, "Steam Controller '%s' connected",
 				steam->serial_no);
@@ -667,15 +887,13 @@ static int steam_register(struct steam_device *steam)
 		mutex_unlock(&steam_devices_lock);
 	}
 
-	mutex_lock(&steam->mutex);
+	spin_lock_irqsave(&steam->lock, flags);
 	client_opened = steam->client_opened;
-	if (!client_opened)
+	spin_unlock_irqrestore(&steam->lock, flags);
+	if (!client_opened) {
 		steam_set_lizard_mode(steam, lizard_mode);
-	mutex_unlock(&steam->mutex);
-
-	if (!client_opened)
 		ret = steam_input_register(steam);
-	else
+	} else
 		ret = 0;
 
 	return ret;
@@ -719,6 +937,34 @@ static void steam_work_connect_cb(struct work_struct *work)
 	}
 }
 
+static void steam_mode_switch_cb(struct work_struct *work)
+{
+	struct steam_device *steam = container_of(to_delayed_work(work),
+							struct steam_device, mode_switch);
+	unsigned long flags;
+	bool client_opened;
+	steam->gamepad_mode = !steam->gamepad_mode;
+	if (!lizard_mode)
+		return;
+
+	if (steam->gamepad_mode)
+		steam_set_lizard_mode(steam, false);
+	else {
+		spin_lock_irqsave(&steam->lock, flags);
+		client_opened = steam->client_opened;
+		spin_unlock_irqrestore(&steam->lock, flags);
+		if (!client_opened)
+			steam_set_lizard_mode(steam, lizard_mode);
+	}
+
+	steam_haptic_pulse(steam, STEAM_PAD_RIGHT, 0x190, 0, 1, 0);
+	if (steam->gamepad_mode) {
+		steam_haptic_pulse(steam, STEAM_PAD_LEFT, 0x14D, 0x14D, 0x2D, 0);
+	} else {
+		steam_haptic_pulse(steam, STEAM_PAD_LEFT, 0x1F4, 0x1F4, 0x1E, 0);
+	}
+}
+
 static bool steam_is_valve_interface(struct hid_device *hdev)
 {
 	struct hid_report_enum *rep_enum;
@@ -738,22 +984,6 @@ static bool steam_is_valve_interface(struct hid_device *hdev)
 	return !list_empty(&rep_enum->report_list);
 }
 
-static void steam_lizard_mode_heartbeat(struct work_struct *work)
-{
-	struct steam_device *steam = container_of(work, struct steam_device,
-							heartbeat.work);
-
-	mutex_lock(&steam->mutex);
-	if (!steam->client_opened && steam->client_hdev) {
-		steam_send_report_byte(steam, STEAM_CMD_CLEAR_MAPPINGS);
-		steam_write_registers(steam,
-			STEAM_REG_RPAD_MODE, 0x07, /* disable mouse */
-			0);
-		schedule_delayed_work(&steam->heartbeat, 5 * HZ);
-	}
-	mutex_unlock(&steam->mutex);
-}
-
 static int steam_client_ll_parse(struct hid_device *hdev)
 {
 	struct steam_device *steam = hdev->driver_data;
@@ -774,10 +1004,11 @@ static void steam_client_ll_stop(struct hid_device *hdev)
 static int steam_client_ll_open(struct hid_device *hdev)
 {
 	struct steam_device *steam = hdev->driver_data;
+	unsigned long flags;
 
-	mutex_lock(&steam->mutex);
-	steam->client_opened = true;
-	mutex_unlock(&steam->mutex);
+	spin_lock_irqsave(&steam->lock, flags);
+	steam->client_opened++;
+	spin_unlock_irqrestore(&steam->lock, flags);
 
 	steam_input_unregister(steam);
 
@@ -792,17 +1023,14 @@ static void steam_client_ll_close(struct hid_device *hdev)
 	bool connected;
 
 	spin_lock_irqsave(&steam->lock, flags);
-	connected = steam->connected;
+	steam->client_opened--;
+	connected = steam->connected && !steam->client_opened;
 	spin_unlock_irqrestore(&steam->lock, flags);
 
-	mutex_lock(&steam->mutex);
-	steam->client_opened = false;
-	if (connected)
+	if (connected) {
 		steam_set_lizard_mode(steam, lizard_mode);
-	mutex_unlock(&steam->mutex);
-
-	if (connected)
 		steam_input_register(steam);
+	}
 }
 
 static int steam_client_ll_raw_request(struct hid_device *hdev,
@@ -888,20 +1116,13 @@ static int steam_probe(struct hid_device *hdev,
 	steam->hdev = hdev;
 	hid_set_drvdata(hdev, steam);
 	spin_lock_init(&steam->lock);
-	mutex_init(&steam->mutex);
+	mutex_init(&steam->report_mutex);
 	steam->quirks = id->driver_data;
 	INIT_WORK(&steam->work_connect, steam_work_connect_cb);
+	INIT_DELAYED_WORK(&steam->mode_switch, steam_mode_switch_cb);
 	INIT_LIST_HEAD(&steam->list);
-	INIT_DEFERRABLE_WORK(&steam->heartbeat, steam_lizard_mode_heartbeat);
 	INIT_WORK(&steam->rumble_work, steam_haptic_rumble_cb);
 
-	steam->client_hdev = steam_create_client_hid(hdev);
-	if (IS_ERR(steam->client_hdev)) {
-		ret = PTR_ERR(steam->client_hdev);
-		goto client_hdev_fail;
-	}
-	steam->client_hdev->driver_data = steam;
-
 	/*
 	 * With the real steam controller interface, do not connect hidraw.
 	 * Instead, create the client_hid and connect that.
@@ -910,10 +1131,6 @@ static int steam_probe(struct hid_device *hdev,
 	if (ret)
 		goto hid_hw_start_fail;
 
-	ret = hid_add_device(steam->client_hdev);
-	if (ret)
-		goto client_hdev_add_fail;
-
 	ret = hid_hw_open(hdev);
 	if (ret) {
 		hid_err(hdev,
@@ -939,17 +1156,28 @@ static int steam_probe(struct hid_device *hdev,
 		}
 	}
 
+	steam->client_hdev = steam_create_client_hid(hdev);
+	if (IS_ERR(steam->client_hdev)) {
+		ret = PTR_ERR(steam->client_hdev);
+		goto client_hdev_fail;
+	}
+	steam->client_hdev->driver_data = steam;
+
+	ret = hid_add_device(steam->client_hdev);
+	if (ret)
+		goto client_hdev_add_fail;
+
 	return 0;
 
-input_register_fail:
-hid_hw_open_fail:
 client_hdev_add_fail:
 	hid_hw_stop(hdev);
-hid_hw_start_fail:
-	hid_destroy_device(steam->client_hdev);
 client_hdev_fail:
+	hid_destroy_device(steam->client_hdev);
+input_register_fail:
+hid_hw_open_fail:
+hid_hw_start_fail:
 	cancel_work_sync(&steam->work_connect);
-	cancel_delayed_work_sync(&steam->heartbeat);
+	cancel_delayed_work_sync(&steam->mode_switch);
 	cancel_work_sync(&steam->rumble_work);
 steam_alloc_fail:
 	hid_err(hdev, "%s: failed with error %d\n",
@@ -966,13 +1194,11 @@ static void steam_remove(struct hid_device *hdev)
 		return;
 	}
 
+	cancel_delayed_work_sync(&steam->mode_switch);
+	cancel_work_sync(&steam->work_connect);
 	hid_destroy_device(steam->client_hdev);
-	mutex_lock(&steam->mutex);
 	steam->client_hdev = NULL;
-	steam->client_opened = false;
-	cancel_delayed_work_sync(&steam->heartbeat);
-	mutex_unlock(&steam->mutex);
-	cancel_work_sync(&steam->work_connect);
+	steam->client_opened = 0;
 	if (steam->quirks & STEAM_QUIRK_WIRELESS) {
 		hid_info(hdev, "Steam wireless receiver disconnected");
 	}
@@ -1254,6 +1480,17 @@ static void steam_do_deck_input_event(struct steam_device *steam,
 	b13 = data[13];
 	b14 = data[14];
 
+	if (!(b9 & BIT(6)) && steam->did_mode_switch) {
+		steam->did_mode_switch = false;
+		cancel_delayed_work_sync(&steam->mode_switch);
+	} else if (!steam->client_opened && (b9 & BIT(6)) && !steam->did_mode_switch) {
+		steam->did_mode_switch = true;
+		schedule_delayed_work(&steam->mode_switch, 45 * HZ / 100);
+	}
+
+	if (!steam->gamepad_mode)
+		return;
+
 	lpad_touched = b10 & BIT(3);
 	rpad_touched = b10 & BIT(4);
 
@@ -1375,7 +1612,7 @@ static int steam_raw_event(struct hid_device *hdev,
 		return 0;
 
 	switch (data[2]) {
-	case STEAM_EV_INPUT_DATA:
+	case ID_CONTROLLER_STATE:
 		if (steam->client_opened)
 			return 0;
 		rcu_read_lock();
@@ -1384,7 +1621,7 @@ static int steam_raw_event(struct hid_device *hdev,
 			steam_do_input_event(steam, input, data);
 		rcu_read_unlock();
 		break;
-	case STEAM_EV_DECK_INPUT_DATA:
+	case ID_CONTROLLER_DECK_STATE:
 		if (steam->client_opened)
 			return 0;
 		rcu_read_lock();
@@ -1393,7 +1630,7 @@ static int steam_raw_event(struct hid_device *hdev,
 			steam_do_deck_input_event(steam, input, data);
 		rcu_read_unlock();
 		break;
-	case STEAM_EV_CONNECT:
+	case ID_CONTROLLER_WIRELESS:
 		/*
 		 * The payload of this event is a single byte:
 		 *  0x01: disconnected.
@@ -1408,7 +1645,7 @@ static int steam_raw_event(struct hid_device *hdev,
 			break;
 		}
 		break;
-	case STEAM_EV_BATTERY:
+	case ID_CONTROLLER_STATUS:
 		if (steam->quirks & STEAM_QUIRK_WIRELESS) {
 			rcu_read_lock();
 			battery = rcu_dereference(steam->battery);
@@ -1439,10 +1676,8 @@ static int steam_param_set_lizard_mode(const char *val,
 
 	mutex_lock(&steam_devices_lock);
 	list_for_each_entry(steam, &steam_devices, list) {
-		mutex_lock(&steam->mutex);
 		if (!steam->client_opened)
 			steam_set_lizard_mode(steam, lizard_mode);
-		mutex_unlock(&steam->mutex);
 	}
 	mutex_unlock(&steam_devices_lock);
 	return 0;
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 2735cd585af0df..90f316ae9819af 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -44,12 +44,11 @@
 #include "i2c-hid.h"
 
 /* quirks to control the device */
-#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV	BIT(0)
-#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET	BIT(1)
-#define I2C_HID_QUIRK_BOGUS_IRQ			BIT(4)
-#define I2C_HID_QUIRK_RESET_ON_RESUME		BIT(5)
-#define I2C_HID_QUIRK_BAD_INPUT_SIZE		BIT(6)
-#define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET	BIT(7)
+#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET	BIT(0)
+#define I2C_HID_QUIRK_BOGUS_IRQ			BIT(1)
+#define I2C_HID_QUIRK_RESET_ON_RESUME		BIT(2)
+#define I2C_HID_QUIRK_BAD_INPUT_SIZE		BIT(3)
+#define I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET	BIT(4)
 
 /* Command opcodes */
 #define I2C_HID_OPCODE_RESET			0x01
@@ -120,8 +119,6 @@ static const struct i2c_hid_quirks {
 	__u16 idProduct;
 	__u32 quirks;
 } i2c_hid_quirks[] = {
-	{ USB_VENDOR_ID_WEIDA, HID_ANY_ID,
-		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
 	{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
 		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
 	{ I2C_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_VOYO_WINPAD_A15,
@@ -395,8 +392,7 @@ static int i2c_hid_set_power(struct i2c_hid *ihid, int power_state)
 	 * The call will get a return value (EREMOTEIO) but device will be
 	 * triggered and activated. After that, it goes like a normal device.
 	 */
-	if (power_state == I2C_HID_PWR_ON &&
-	    ihid->quirks & I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV) {
+	if (power_state == I2C_HID_PWR_ON) {
 		ret = i2c_hid_set_power_command(ihid, I2C_HID_PWR_ON);
 
 		/* Device was already activated */
@@ -426,12 +422,23 @@ set_pwr_exit:
 	return ret;
 }
 
-static int i2c_hid_execute_reset(struct i2c_hid *ihid)
+static int i2c_hid_start_hwreset(struct i2c_hid *ihid)
 {
 	size_t length = 0;
 	int ret;
 
-	i2c_hid_dbg(ihid, "resetting...\n");
+	i2c_hid_dbg(ihid, "%s\n", __func__);
+
+	/*
+	 * This prevents sending feature reports while the device is
+	 * being reset. Otherwise we may lose the reset complete
+	 * interrupt.
+	 */
+	lockdep_assert_held(&ihid->reset_lock);
+
+	ret = i2c_hid_set_power(ihid, I2C_HID_PWR_ON);
+	if (ret)
+		return ret;
 
 	/* Prepare reset command. Command register goes first. */
 	*(__le16 *)ihid->cmdbuf = ihid->hdesc.wCommandRegister;
@@ -444,60 +451,40 @@ static int i2c_hid_execute_reset(struct i2c_hid *ihid)
 
 	ret = i2c_hid_xfer(ihid, ihid->cmdbuf, length, NULL, 0);
 	if (ret) {
-		dev_err(&ihid->client->dev, "failed to reset device.\n");
-		goto out;
-	}
-
-	if (ihid->quirks & I2C_HID_QUIRK_NO_IRQ_AFTER_RESET) {
-		msleep(100);
-		goto out;
+		dev_err(&ihid->client->dev,
+			"failed to reset device: %d\n", ret);
+		goto err_clear_reset;
 	}
 
-	i2c_hid_dbg(ihid, "%s: waiting...\n", __func__);
-	if (!wait_event_timeout(ihid->wait,
-				!test_bit(I2C_HID_RESET_PENDING, &ihid->flags),
-				msecs_to_jiffies(5000))) {
-		ret = -ENODATA;
-		goto out;
-	}
-	i2c_hid_dbg(ihid, "%s: finished.\n", __func__);
+	return 0;
 
-out:
+err_clear_reset:
 	clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
+	i2c_hid_set_power(ihid, I2C_HID_PWR_SLEEP);
 	return ret;
 }
 
-static int i2c_hid_hwreset(struct i2c_hid *ihid)
+static int i2c_hid_finish_hwreset(struct i2c_hid *ihid)
 {
-	int ret;
+	int ret = 0;
 
-	i2c_hid_dbg(ihid, "%s\n", __func__);
-
-	/*
-	 * This prevents sending feature reports while the device is
-	 * being reset. Otherwise we may lose the reset complete
-	 * interrupt.
-	 */
-	mutex_lock(&ihid->reset_lock);
-
-	ret = i2c_hid_set_power(ihid, I2C_HID_PWR_ON);
-	if (ret)
-		goto out_unlock;
+	i2c_hid_dbg(ihid, "%s: waiting...\n", __func__);
 
-	ret = i2c_hid_execute_reset(ihid);
-	if (ret) {
-		dev_err(&ihid->client->dev,
-			"failed to reset device: %d\n", ret);
-		i2c_hid_set_power(ihid, I2C_HID_PWR_SLEEP);
-		goto out_unlock;
+	if (ihid->quirks & I2C_HID_QUIRK_NO_IRQ_AFTER_RESET) {
+		msleep(100);
+		clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
+	} else if (!wait_event_timeout(ihid->wait,
+				       !test_bit(I2C_HID_RESET_PENDING, &ihid->flags),
+				       msecs_to_jiffies(1000))) {
+		dev_warn(&ihid->client->dev, "device did not ack reset within 1000 ms\n");
+		clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
 	}
+	i2c_hid_dbg(ihid, "%s: finished.\n", __func__);
 
 	/* At least some SIS devices need this after reset */
 	if (!(ihid->quirks & I2C_HID_QUIRK_NO_WAKEUP_AFTER_RESET))
 		ret = i2c_hid_set_power(ihid, I2C_HID_PWR_ON);
 
-out_unlock:
-	mutex_unlock(&ihid->reset_lock);
 	return ret;
 }
 
@@ -729,11 +716,10 @@ static int i2c_hid_parse(struct hid_device *hid)
 	struct i2c_client *client = hid->driver_data;
 	struct i2c_hid *ihid = i2c_get_clientdata(client);
 	struct i2c_hid_desc *hdesc = &ihid->hdesc;
+	char *rdesc = NULL, *use_override = NULL;
 	unsigned int rsize;
-	char *rdesc;
 	int ret;
 	int tries = 3;
-	char *use_override;
 
 	i2c_hid_dbg(ihid, "entering %s\n", __func__);
 
@@ -743,14 +729,15 @@ static int i2c_hid_parse(struct hid_device *hid)
 		return -EINVAL;
 	}
 
+	mutex_lock(&ihid->reset_lock);
 	do {
-		ret = i2c_hid_hwreset(ihid);
+		ret = i2c_hid_start_hwreset(ihid);
 		if (ret)
 			msleep(1000);
 	} while (tries-- > 0 && ret);
 
 	if (ret)
-		return ret;
+		goto abort_reset;
 
 	use_override = i2c_hid_get_dmi_hid_report_desc_override(client->name,
 								&rsize);
@@ -762,8 +749,8 @@ static int i2c_hid_parse(struct hid_device *hid)
 		rdesc = kzalloc(rsize, GFP_KERNEL);
 
 		if (!rdesc) {
-			dbg_hid("couldn't allocate rdesc memory\n");
-			return -ENOMEM;
+			ret = -ENOMEM;
+			goto abort_reset;
 		}
 
 		i2c_hid_dbg(ihid, "asking HID report descriptor\n");
@@ -773,23 +760,34 @@ static int i2c_hid_parse(struct hid_device *hid)
 					    rdesc, rsize);
 		if (ret) {
 			hid_err(hid, "reading report descriptor failed\n");
-			kfree(rdesc);
-			return -EIO;
+			goto abort_reset;
 		}
 	}
 
+	/*
+	 * Windows directly reads the report-descriptor after sending reset
+	 * and then waits for resets completion afterwards. Some touchpads
+	 * actually wait for the report-descriptor to be read before signalling
+	 * reset completion.
+	 */
+	ret = i2c_hid_finish_hwreset(ihid);
+abort_reset:
+	clear_bit(I2C_HID_RESET_PENDING, &ihid->flags);
+	mutex_unlock(&ihid->reset_lock);
+	if (ret)
+		goto out;
+
 	i2c_hid_dbg(ihid, "Report Descriptor: %*ph\n", rsize, rdesc);
 
 	ret = hid_parse_report(hid, rdesc, rsize);
+	if (ret)
+		dbg_hid("parsing report descriptor failed\n");
+
+out:
 	if (!use_override)
 		kfree(rdesc);
 
-	if (ret) {
-		dbg_hid("parsing report descriptor failed\n");
-		return ret;
-	}
-
-	return 0;
+	return ret;
 }
 
 static int i2c_hid_start(struct hid_device *hid)
@@ -987,10 +985,15 @@ static int i2c_hid_core_resume(struct i2c_hid *ihid)
 	 * However some ALPS touchpads generate IRQ storm without reset, so
 	 * let's still reset them here.
 	 */
-	if (ihid->quirks & I2C_HID_QUIRK_RESET_ON_RESUME)
-		ret = i2c_hid_hwreset(ihid);
-	else
+	if (ihid->quirks & I2C_HID_QUIRK_RESET_ON_RESUME) {
+		mutex_lock(&ihid->reset_lock);
+		ret = i2c_hid_start_hwreset(ihid);
+		if (ret == 0)
+			ret = i2c_hid_finish_hwreset(ihid);
+		mutex_unlock(&ihid->reset_lock);
+	} else {
 		ret = i2c_hid_set_power(ihid, I2C_HID_PWR_ON);
+	}
 
 	if (ret)
 		return ret;
diff --git a/drivers/hid/i2c-hid/i2c-hid-of-elan.c b/drivers/hid/i2c-hid/i2c-hid-of-elan.c
index 31abab57ad443e..5b91fb106cfc3c 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of-elan.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of-elan.c
@@ -130,9 +130,17 @@ static const struct elan_i2c_hid_chip_data ilitek_ili9882t_chip_data = {
 	.main_supply_name = NULL,
 };
 
+static const struct elan_i2c_hid_chip_data ilitek_ili2901_chip_data = {
+	.post_power_delay_ms = 10,
+	.post_gpio_reset_on_delay_ms = 100,
+	.hid_descriptor_address = 0x0001,
+	.main_supply_name = "vcc33",
+};
+
 static const struct of_device_id elan_i2c_hid_of_match[] = {
 	{ .compatible = "elan,ekth6915", .data = &elan_ekth6915_chip_data },
 	{ .compatible = "ilitek,ili9882t", .data = &ilitek_ili9882t_chip_data },
+	{ .compatible = "ilitek,ili2901", .data = &ilitek_ili2901_chip_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, elan_i2c_hid_of_match);
diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
index 710fda5f19e1c9..65e7eeb2fa64ec 100644
--- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c
+++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
@@ -119,50 +119,6 @@ static inline bool ish_should_leave_d0i3(struct pci_dev *pdev)
 	return !pm_resume_via_firmware() || pdev->device == CHV_DEVICE_ID;
 }
 
-static int enable_gpe(struct device *dev)
-{
-#ifdef CONFIG_ACPI
-	acpi_status acpi_sts;
-	struct acpi_device *adev;
-	struct acpi_device_wakeup *wakeup;
-
-	adev = ACPI_COMPANION(dev);
-	if (!adev) {
-		dev_err(dev, "get acpi handle failed\n");
-		return -ENODEV;
-	}
-	wakeup = &adev->wakeup;
-
-	/*
-	 * Call acpi_disable_gpe(), so that reference count
-	 * gpe_event_info->runtime_count doesn't overflow.
-	 * When gpe_event_info->runtime_count = 0, the call
-	 * to acpi_disable_gpe() simply return.
-	 */
-	acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
-
-	acpi_sts = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
-	if (ACPI_FAILURE(acpi_sts)) {
-		dev_err(dev, "enable ose_gpe failed\n");
-		return -EIO;
-	}
-
-	return 0;
-#else
-	return -ENODEV;
-#endif
-}
-
-static void enable_pme_wake(struct pci_dev *pdev)
-{
-	if ((pci_pme_capable(pdev, PCI_D0) ||
-	     pci_pme_capable(pdev, PCI_D3hot) ||
-	     pci_pme_capable(pdev, PCI_D3cold)) && !enable_gpe(&pdev->dev)) {
-		pci_pme_active(pdev, true);
-		dev_dbg(&pdev->dev, "ish ipc driver pme wake enabled\n");
-	}
-}
-
 /**
  * ish_probe() - PCI driver probe callback
  * @pdev:	pci device
@@ -233,7 +189,7 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Enable PME for EHL */
 	if (pdev->device == EHL_Ax_DEVICE_ID)
-		enable_pme_wake(pdev);
+		device_init_wakeup(dev, true);
 
 	ret = ish_init(ishtp);
 	if (ret)
@@ -256,6 +212,19 @@ static void ish_remove(struct pci_dev *pdev)
 	ish_device_disable(ishtp_dev);
 }
 
+
+/**
+ * ish_shutdown() - PCI driver shutdown callback
+ * @pdev:	pci device
+ *
+ * This function sets up wakeup for S5
+ */
+static void ish_shutdown(struct pci_dev *pdev)
+{
+	if (pdev->device == EHL_Ax_DEVICE_ID)
+		pci_prepare_to_sleep(pdev);
+}
+
 static struct device __maybe_unused *ish_resume_device;
 
 /* 50ms to get resume response */
@@ -378,13 +347,6 @@ static int __maybe_unused ish_resume(struct device *device)
 	struct pci_dev *pdev = to_pci_dev(device);
 	struct ishtp_device *dev = pci_get_drvdata(pdev);
 
-	/* add this to finish power flow for EHL */
-	if (dev->pdev->device == EHL_Ax_DEVICE_ID) {
-		pci_set_power_state(pdev, PCI_D0);
-		enable_pme_wake(pdev);
-		dev_dbg(dev->devc, "set power state to D0 for ehl\n");
-	}
-
 	ish_resume_device = device;
 	dev->resume_flag = 1;
 
@@ -400,6 +362,7 @@ static struct pci_driver ish_driver = {
 	.id_table = ish_pci_tbl,
 	.probe = ish_probe,
 	.remove = ish_remove,
+	.shutdown = ish_shutdown,
 	.driver.pm = &ish_pm_ops,
 };
 
diff --git a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
index 16aa030af8453c..e157863a8b250b 100644
--- a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
+++ b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
@@ -840,43 +840,22 @@ static void load_fw_from_host_handler(struct work_struct *work)
  *
  * Return: 0 for success, negative error code for failure
  */
-static int loader_init(struct ishtp_cl *loader_ishtp_cl, int reset)
+static int loader_init(struct ishtp_cl *loader_ishtp_cl, bool reset)
 {
 	int rv;
-	struct ishtp_fw_client *fw_client;
 	struct ishtp_cl_data *client_data =
 		ishtp_get_client_data(loader_ishtp_cl);
 
 	dev_dbg(cl_data_to_dev(client_data), "reset flag: %d\n", reset);
 
-	rv = ishtp_cl_link(loader_ishtp_cl);
-	if (rv < 0) {
-		dev_err(cl_data_to_dev(client_data), "ishtp_cl_link failed\n");
-		return rv;
-	}
-
-	/* Connect to firmware client */
-	ishtp_set_tx_ring_size(loader_ishtp_cl, LOADER_CL_TX_RING_SIZE);
-	ishtp_set_rx_ring_size(loader_ishtp_cl, LOADER_CL_RX_RING_SIZE);
-
-	fw_client =
-		ishtp_fw_cl_get_client(ishtp_get_ishtp_device(loader_ishtp_cl),
-				       &loader_ishtp_id_table[0].guid);
-	if (!fw_client) {
-		dev_err(cl_data_to_dev(client_data),
-			"ISH client uuid not found\n");
-		rv = -ENOENT;
-		goto err_cl_unlink;
-	}
-
-	ishtp_cl_set_fw_client_id(loader_ishtp_cl,
-				  ishtp_get_fw_client_id(fw_client));
-	ishtp_set_connection_state(loader_ishtp_cl, ISHTP_CL_CONNECTING);
-
-	rv = ishtp_cl_connect(loader_ishtp_cl);
+	rv = ishtp_cl_establish_connection(loader_ishtp_cl,
+					   &loader_ishtp_id_table[0].guid,
+					   LOADER_CL_TX_RING_SIZE,
+					   LOADER_CL_RX_RING_SIZE,
+					   reset);
 	if (rv < 0) {
 		dev_err(cl_data_to_dev(client_data), "Client connect fail\n");
-		goto err_cl_unlink;
+		goto err_cl_disconnect;
 	}
 
 	dev_dbg(cl_data_to_dev(client_data), "Client connected\n");
@@ -885,17 +864,14 @@ static int loader_init(struct ishtp_cl *loader_ishtp_cl, int reset)
 
 	return 0;
 
-err_cl_unlink:
-	ishtp_cl_unlink(loader_ishtp_cl);
+err_cl_disconnect:
+	ishtp_cl_destroy_connection(loader_ishtp_cl, reset);
 	return rv;
 }
 
 static void loader_deinit(struct ishtp_cl *loader_ishtp_cl)
 {
-	ishtp_set_connection_state(loader_ishtp_cl, ISHTP_CL_DISCONNECTING);
-	ishtp_cl_disconnect(loader_ishtp_cl);
-	ishtp_cl_unlink(loader_ishtp_cl);
-	ishtp_cl_flush_queues(loader_ishtp_cl);
+	ishtp_cl_destroy_connection(loader_ishtp_cl, false);
 
 	/* Disband and free all Tx and Rx client-level rings */
 	ishtp_cl_free(loader_ishtp_cl);
@@ -914,19 +890,7 @@ static void reset_handler(struct work_struct *work)
 	loader_ishtp_cl = client_data->loader_ishtp_cl;
 	cl_device = client_data->cl_device;
 
-	/* Unlink, flush queues & start again */
-	ishtp_cl_unlink(loader_ishtp_cl);
-	ishtp_cl_flush_queues(loader_ishtp_cl);
-	ishtp_cl_free(loader_ishtp_cl);
-
-	loader_ishtp_cl = ishtp_cl_allocate(cl_device);
-	if (!loader_ishtp_cl)
-		return;
-
-	ishtp_set_drvdata(cl_device, loader_ishtp_cl);
-	ishtp_set_client_data(loader_ishtp_cl, client_data);
-	client_data->loader_ishtp_cl = loader_ishtp_cl;
-	client_data->cl_device = cl_device;
+	ishtp_cl_destroy_connection(loader_ishtp_cl, true);
 
 	rv = loader_init(loader_ishtp_cl, 1);
 	if (rv < 0) {
@@ -974,7 +938,7 @@ static int loader_ishtp_cl_probe(struct ishtp_cl_device *cl_device)
 	INIT_WORK(&client_data->work_fw_load,
 		  load_fw_from_host_handler);
 
-	rv = loader_init(loader_ishtp_cl, 0);
+	rv = loader_init(loader_ishtp_cl, false);
 	if (rv < 0) {
 		ishtp_cl_free(loader_ishtp_cl);
 		return rv;
diff --git a/drivers/hid/intel-ish-hid/ishtp-hid-client.c b/drivers/hid/intel-ish-hid/ishtp-hid-client.c
index e3d70c5460e964..fbd4f8ea1951b8 100644
--- a/drivers/hid/intel-ish-hid/ishtp-hid-client.c
+++ b/drivers/hid/intel-ish-hid/ishtp-hid-client.c
@@ -639,47 +639,26 @@ static int ishtp_get_report_descriptor(struct ishtp_cl *hid_ishtp_cl,
  *
  * Return: 0 on success, non zero on error
  */
-static int hid_ishtp_cl_init(struct ishtp_cl *hid_ishtp_cl, int reset)
+static int hid_ishtp_cl_init(struct ishtp_cl *hid_ishtp_cl, bool reset)
 {
-	struct ishtp_device *dev;
 	struct ishtp_cl_data *client_data = ishtp_get_client_data(hid_ishtp_cl);
-	struct ishtp_fw_client *fw_client;
 	int i;
 	int rv;
 
 	dev_dbg(cl_data_to_dev(client_data), "%s\n", __func__);
 	hid_ishtp_trace(client_data,  "%s reset flag: %d\n", __func__, reset);
 
-	rv = ishtp_cl_link(hid_ishtp_cl);
-	if (rv) {
-		dev_err(cl_data_to_dev(client_data),
-			"ishtp_cl_link failed\n");
-		return	-ENOMEM;
-	}
-
 	client_data->init_done = 0;
 
-	dev = ishtp_get_ishtp_device(hid_ishtp_cl);
-
-	/* Connect to FW client */
-	ishtp_set_tx_ring_size(hid_ishtp_cl, HID_CL_TX_RING_SIZE);
-	ishtp_set_rx_ring_size(hid_ishtp_cl, HID_CL_RX_RING_SIZE);
-
-	fw_client = ishtp_fw_cl_get_client(dev, &hid_ishtp_id_table[0].guid);
-	if (!fw_client) {
-		dev_err(cl_data_to_dev(client_data),
-			"ish client uuid not found\n");
-		return -ENOENT;
-	}
-	ishtp_cl_set_fw_client_id(hid_ishtp_cl,
-				  ishtp_get_fw_client_id(fw_client));
-	ishtp_set_connection_state(hid_ishtp_cl, ISHTP_CL_CONNECTING);
-
-	rv = ishtp_cl_connect(hid_ishtp_cl);
+	rv = ishtp_cl_establish_connection(hid_ishtp_cl,
+					   &hid_ishtp_id_table[0].guid,
+					   HID_CL_TX_RING_SIZE,
+					   HID_CL_RX_RING_SIZE,
+					   reset);
 	if (rv) {
 		dev_err(cl_data_to_dev(client_data),
 			"client connect fail\n");
-		goto err_cl_unlink;
+		goto err_cl_disconnect;
 	}
 
 	hid_ishtp_trace(client_data,  "%s client connected\n", __func__);
@@ -723,10 +702,7 @@ static int hid_ishtp_cl_init(struct ishtp_cl *hid_ishtp_cl, int reset)
 	return 0;
 
 err_cl_disconnect:
-	ishtp_set_connection_state(hid_ishtp_cl, ISHTP_CL_DISCONNECTING);
-	ishtp_cl_disconnect(hid_ishtp_cl);
-err_cl_unlink:
-	ishtp_cl_unlink(hid_ishtp_cl);
+	ishtp_cl_destroy_connection(hid_ishtp_cl, reset);
 	return rv;
 }
 
@@ -738,8 +714,7 @@ err_cl_unlink:
  */
 static void hid_ishtp_cl_deinit(struct ishtp_cl *hid_ishtp_cl)
 {
-	ishtp_cl_unlink(hid_ishtp_cl);
-	ishtp_cl_flush_queues(hid_ishtp_cl);
+	ishtp_cl_destroy_connection(hid_ishtp_cl, false);
 
 	/* disband and free all Tx and Rx client-level rings */
 	ishtp_cl_free(hid_ishtp_cl);
@@ -749,33 +724,23 @@ static void hid_ishtp_cl_reset_handler(struct work_struct *work)
 {
 	struct ishtp_cl_data *client_data;
 	struct ishtp_cl *hid_ishtp_cl;
-	struct ishtp_cl_device *cl_device;
 	int retry;
 	int rv;
 
 	client_data = container_of(work, struct ishtp_cl_data, work);
 
 	hid_ishtp_cl = client_data->hid_ishtp_cl;
-	cl_device = client_data->cl_device;
 
 	hid_ishtp_trace(client_data, "%s hid_ishtp_cl %p\n", __func__,
 			hid_ishtp_cl);
 	dev_dbg(ishtp_device(client_data->cl_device), "%s\n", __func__);
 
-	hid_ishtp_cl_deinit(hid_ishtp_cl);
-
-	hid_ishtp_cl = ishtp_cl_allocate(cl_device);
-	if (!hid_ishtp_cl)
-		return;
-
-	ishtp_set_drvdata(cl_device, hid_ishtp_cl);
-	ishtp_set_client_data(hid_ishtp_cl, client_data);
-	client_data->hid_ishtp_cl = hid_ishtp_cl;
+	ishtp_cl_destroy_connection(hid_ishtp_cl, true);
 
 	client_data->num_hid_devices = 0;
 
 	for (retry = 0; retry < 3; ++retry) {
-		rv = hid_ishtp_cl_init(hid_ishtp_cl, 1);
+		rv = hid_ishtp_cl_init(hid_ishtp_cl, true);
 		if (!rv)
 			break;
 		dev_err(cl_data_to_dev(client_data), "Retry reset init\n");
@@ -841,7 +806,7 @@ static int hid_ishtp_cl_probe(struct ishtp_cl_device *cl_device)
 
 	ishtp_hid_print_trace = ishtp_trace_callback(cl_device);
 
-	rv = hid_ishtp_cl_init(hid_ishtp_cl, 0);
+	rv = hid_ishtp_cl_init(hid_ishtp_cl, false);
 	if (rv) {
 		ishtp_cl_free(hid_ishtp_cl);
 		return rv;
@@ -868,11 +833,9 @@ static void hid_ishtp_cl_remove(struct ishtp_cl_device *cl_device)
 			hid_ishtp_cl);
 
 	dev_dbg(ishtp_device(cl_device), "%s\n", __func__);
-	ishtp_set_connection_state(hid_ishtp_cl, ISHTP_CL_DISCONNECTING);
-	ishtp_cl_disconnect(hid_ishtp_cl);
+	hid_ishtp_cl_deinit(hid_ishtp_cl);
 	ishtp_put_device(cl_device);
 	ishtp_hid_remove(client_data);
-	hid_ishtp_cl_deinit(hid_ishtp_cl);
 
 	hid_ishtp_cl = NULL;
 
diff --git a/drivers/hid/intel-ish-hid/ishtp/bus.c b/drivers/hid/intel-ish-hid/ishtp/bus.c
index 7fc738a2237556..aa6cb033bb06b7 100644
--- a/drivers/hid/intel-ish-hid/ishtp/bus.c
+++ b/drivers/hid/intel-ish-hid/ishtp/bus.c
@@ -378,7 +378,7 @@ static const struct dev_pm_ops ishtp_cl_bus_dev_pm_ops = {
 	.restore = ishtp_cl_device_resume,
 };
 
-static struct bus_type ishtp_cl_bus_type = {
+static const struct bus_type ishtp_cl_bus_type = {
 	.name		= "ishtp",
 	.dev_groups	= ishtp_cl_dev_groups,
 	.probe		= ishtp_cl_device_probe,
diff --git a/drivers/hid/intel-ish-hid/ishtp/client.c b/drivers/hid/intel-ish-hid/ishtp/client.c
index 2d92fc129ce4d8..82c907f01bd3b6 100644
--- a/drivers/hid/intel-ish-hid/ishtp/client.c
+++ b/drivers/hid/intel-ish-hid/ishtp/client.c
@@ -339,16 +339,17 @@ static bool ishtp_cl_is_other_connecting(struct ishtp_cl *cl)
 }
 
 /**
- * ishtp_cl_connect() - Send connect request to firmware
+ * ishtp_cl_connect_to_fw() - Send connect request to firmware
  * @cl: client device instance
  *
- * Send a connect request for a client to firmware. If successful it will
- * RX and TX ring buffers
+ * Send a connect request to the firmware and wait for firmware response.
+ * If there is successful connection response from the firmware, change
+ * client state to ISHTP_CL_CONNECTED, and bind client to related
+ * firmware client_id.
  *
- * Return: 0 if successful connect response from the firmware and able
- * to bind and allocate ring buffers or error code on failure
+ * Return: 0 for success and error code on failure
  */
-int ishtp_cl_connect(struct ishtp_cl *cl)
+static int ishtp_cl_connect_to_fw(struct ishtp_cl *cl)
 {
 	struct ishtp_device *dev;
 	int rets;
@@ -358,8 +359,6 @@ int ishtp_cl_connect(struct ishtp_cl *cl)
 
 	dev = cl->dev;
 
-	dev->print_log(dev, "%s() current_state = %d\n", __func__, cl->state);
-
 	if (ishtp_cl_is_other_connecting(cl)) {
 		dev->print_log(dev, "%s() Busy\n", __func__);
 		return	-EBUSY;
@@ -405,6 +404,38 @@ int ishtp_cl_connect(struct ishtp_cl *cl)
 		return rets;
 	}
 
+	return rets;
+}
+
+/**
+ * ishtp_cl_connect() - Build connection with firmware
+ * @cl: client device instance
+ *
+ * Call ishtp_cl_connect_to_fw() to connect and bind to firmware. If successful,
+ * allocate RX and TX ring buffers, and start flow control with firmware to
+ * start communication.
+ *
+ * Return: 0 if there is successful connection to the firmware, allocate
+ * ring buffers.
+ */
+int ishtp_cl_connect(struct ishtp_cl *cl)
+{
+	struct ishtp_device *dev;
+	int rets;
+
+	if (!cl || !cl->dev)
+		return -ENODEV;
+
+	dev = cl->dev;
+
+	dev->print_log(dev, "%s() current_state = %d\n", __func__, cl->state);
+
+	rets = ishtp_cl_connect_to_fw(cl);
+	if (rets) {
+		dev->print_log(dev, "%s() Connect to fw failed\n", __func__);
+		return rets;
+	}
+
 	rets = ishtp_cl_alloc_rx_ring(cl);
 	if (rets) {
 		dev->print_log(dev, "%s() Alloc RX ring failed\n", __func__);
@@ -422,16 +453,148 @@ int ishtp_cl_connect(struct ishtp_cl *cl)
 		return rets;
 	}
 
-	/* Upon successful connection and allocation, emit flow-control */
+	/*
+	 * Upon successful connection and allocation, start flow-control.
+	 */
 	rets = ishtp_cl_read_start(cl);
 
-	dev->print_log(dev, "%s() successful\n", __func__);
-
 	return rets;
 }
 EXPORT_SYMBOL(ishtp_cl_connect);
 
 /**
+ * ishtp_cl_establish_connection() - Establish connection with the firmware
+ * @cl: client device instance
+ * @uuid: uuid of the client to search
+ * @tx_size: TX ring buffer size
+ * @rx_size: RX ring buffer size
+ * @reset: true if called for reset connection, otherwise for first connection
+ *
+ * This is a helper function for client driver to build connection with firmware.
+ * If it's first time connecting to the firmware, set reset to false, this
+ * function will link client to bus, find client id and send connect request to
+ * the firmware.
+ *
+ * If it's called for reset handler where client lost connection after
+ * firmware reset, set reset to true, this function will reinit client state and
+ * establish connection again. In this case, this function reuses current client
+ * structure and ring buffers to avoid allocation failure and memory fragments.
+ *
+ * Return: 0 for successful connection with the firmware,
+ * or error code on failure
+ */
+int ishtp_cl_establish_connection(struct ishtp_cl *cl, const guid_t *uuid,
+				  int tx_size, int rx_size, bool reset)
+{
+	struct ishtp_device *dev;
+	struct ishtp_fw_client *fw_client;
+	int rets;
+
+	if (!cl || !cl->dev)
+		return -ENODEV;
+
+	dev = cl->dev;
+
+	ishtp_set_connection_state(cl, ISHTP_CL_INITIALIZING);
+
+	/* reinit ishtp_cl structure if call for reset */
+	if (reset) {
+		cl->host_client_id = 0;
+		cl->fw_client_id = 0;
+		cl->ishtp_flow_ctrl_creds = 0;
+		cl->out_flow_ctrl_creds = 0;
+
+		cl->last_tx_path = CL_TX_PATH_IPC;
+		cl->last_dma_acked = 1;
+		cl->last_dma_addr = NULL;
+		cl->last_ipc_acked = 1;
+
+		cl->sending = 0;
+		cl->err_send_msg = 0;
+		cl->err_send_fc = 0;
+
+		cl->send_msg_cnt_ipc = 0;
+		cl->send_msg_cnt_dma = 0;
+		cl->recv_msg_cnt_ipc = 0;
+		cl->recv_msg_cnt_dma = 0;
+		cl->recv_msg_num_frags = 0;
+		cl->ishtp_flow_ctrl_cnt = 0;
+		cl->out_flow_ctrl_cnt = 0;
+	}
+
+	/* link to bus */
+	rets = ishtp_cl_link(cl);
+	if (rets) {
+		dev->print_log(dev, "%s() ishtp_cl_link failed\n", __func__);
+		return rets;
+	}
+
+	/* find firmware client */
+	fw_client = ishtp_fw_cl_get_client(dev, uuid);
+	if (!fw_client) {
+		dev->print_log(dev,
+			       "%s() ish client uuid not found\n", __func__);
+		return -ENOENT;
+	}
+
+	ishtp_set_tx_ring_size(cl, tx_size);
+	ishtp_set_rx_ring_size(cl, rx_size);
+
+	ishtp_cl_set_fw_client_id(cl, ishtp_get_fw_client_id(fw_client));
+
+	ishtp_set_connection_state(cl, ISHTP_CL_CONNECTING);
+
+	/*
+	 * For reset case, not allocate tx/rx ring buffer which are already
+	 * done in ishtp_cl_connect() during first connection.
+	 */
+	if (reset) {
+		rets = ishtp_cl_connect_to_fw(cl);
+		if (!rets)
+			rets = ishtp_cl_read_start(cl);
+		else
+			dev->print_log(dev,
+				"%s() connect to fw failed\n", __func__);
+	} else {
+		rets = ishtp_cl_connect(cl);
+	}
+
+	return rets;
+}
+EXPORT_SYMBOL(ishtp_cl_establish_connection);
+
+/**
+ * ishtp_cl_destroy_connection() - Disconnect with the firmware
+ * @cl: client device instance
+ * @reset: true if called for firmware reset, false for normal disconnection
+ *
+ * This is a helper function for client driver to disconnect with firmware,
+ * unlink to bus and flush message queue.
+ */
+void ishtp_cl_destroy_connection(struct ishtp_cl *cl, bool reset)
+{
+	if (!cl)
+		return;
+
+	if (reset) {
+		/*
+		 * For reset case, connection is already lost during fw reset.
+		 * Just set state to DISCONNECTED is enough.
+		 */
+		ishtp_set_connection_state(cl, ISHTP_CL_DISCONNECTED);
+	} else {
+		if (cl->state != ISHTP_CL_DISCONNECTED) {
+			ishtp_set_connection_state(cl, ISHTP_CL_DISCONNECTING);
+			ishtp_cl_disconnect(cl);
+		}
+	}
+
+	ishtp_cl_unlink(cl);
+	ishtp_cl_flush_queues(cl);
+}
+EXPORT_SYMBOL(ishtp_cl_destroy_connection);
+
+/**
  * ishtp_cl_read_start() - Prepare to read client message
  * @cl: client device instance
  *
diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h
index 166a76c9bcad38..77c5fb26cd14c2 100644
--- a/drivers/hid/wacom.h
+++ b/drivers/hid/wacom.h
@@ -164,6 +164,7 @@ struct wacom {
 	struct work_struct battery_work;
 	struct work_struct remote_work;
 	struct delayed_work init_work;
+	struct delayed_work aes_battery_work;
 	struct wacom_remote *remote;
 	struct work_struct mode_change_work;
 	struct timer_list idleprox_timer;
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index 3f704b8072e8a0..b613f11ed9498d 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -1813,6 +1813,13 @@ static void wacom_destroy_battery(struct wacom *wacom)
 	}
 }
 
+static void wacom_aes_battery_handler(struct work_struct *work)
+{
+	struct wacom *wacom = container_of(work, struct wacom, aes_battery_work.work);
+
+	wacom_destroy_battery(wacom);
+}
+
 static ssize_t wacom_show_speed(struct device *dev,
 				struct device_attribute
 				*attr, char *buf)
@@ -2794,6 +2801,7 @@ static int wacom_probe(struct hid_device *hdev,
 
 	mutex_init(&wacom->lock);
 	INIT_DELAYED_WORK(&wacom->init_work, wacom_init_work);
+	INIT_DELAYED_WORK(&wacom->aes_battery_work, wacom_aes_battery_handler);
 	INIT_WORK(&wacom->wireless_work, wacom_wireless_work);
 	INIT_WORK(&wacom->battery_work, wacom_battery_work);
 	INIT_WORK(&wacom->remote_work, wacom_remote_work);
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 471db78dbbf02d..da8a01fedd3944 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2528,11 +2528,12 @@ static void wacom_wac_pen_report(struct hid_device *hdev,
 	struct input_dev *input = wacom_wac->pen_input;
 	bool range = wacom_wac->hid_data.inrange_state;
 	bool sense = wacom_wac->hid_data.sense_state;
+	bool entering_range = !wacom_wac->tool[0] && range;
 
 	if (wacom_wac->is_invalid_bt_frame)
 		return;
 
-	if (!wacom_wac->tool[0] && range) { /* first in range */
+	if (entering_range) { /* first in range */
 		/* Going into range select tool */
 		if (wacom_wac->hid_data.invert_state)
 			wacom_wac->tool[0] = BTN_TOOL_RUBBER;
@@ -2583,6 +2584,15 @@ static void wacom_wac_pen_report(struct hid_device *hdev,
 		input_sync(input);
 	}
 
+	/* Handle AES battery timeout behavior */
+	if (wacom_wac->features.quirks & WACOM_QUIRK_AESPEN) {
+		if (entering_range)
+			cancel_delayed_work(&wacom->aes_battery_work);
+		if (!sense)
+			schedule_delayed_work(&wacom->aes_battery_work,
+					      msecs_to_jiffies(WACOM_AES_BATTERY_TIMEOUT));
+	}
+
 	if (!sense) {
 		wacom_wac->tool[0] = 0;
 		wacom_wac->id[0] = 0;
@@ -2649,8 +2659,8 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
 {
 	struct hid_data *hid_data = &wacom_wac->hid_data;
 	bool mt = wacom_wac->features.touch_max > 1;
-	bool prox = hid_data->tipswitch &&
-		    report_touch_events(wacom_wac);
+	bool touch_down = hid_data->tipswitch && hid_data->confidence;
+	bool prox = touch_down && report_touch_events(wacom_wac);
 
 	if (touch_is_muted(wacom_wac)) {
 		if (!wacom_wac->shared->touch_down)
@@ -2700,24 +2710,6 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
 	}
 }
 
-static bool wacom_wac_slot_is_active(struct input_dev *dev, int key)
-{
-	struct input_mt *mt = dev->mt;
-	struct input_mt_slot *s;
-
-	if (!mt)
-		return false;
-
-	for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
-		if (s->key == key &&
-			input_mt_get_value(s, ABS_MT_TRACKING_ID) >= 0) {
-			return true;
-		}
-	}
-
-	return false;
-}
-
 static void wacom_wac_finger_event(struct hid_device *hdev,
 		struct hid_field *field, struct hid_usage *usage, __s32 value)
 {
@@ -2768,14 +2760,8 @@ static void wacom_wac_finger_event(struct hid_device *hdev,
 	}
 
 	if (usage->usage_index + 1 == field->report_count) {
-		if (equivalent_usage == wacom_wac->hid_data.last_slot_field) {
-			bool touch_removed = wacom_wac_slot_is_active(wacom_wac->touch_input,
-				wacom_wac->hid_data.id) && !wacom_wac->hid_data.tipswitch;
-
-			if (wacom_wac->hid_data.confidence || touch_removed) {
-				wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
-			}
-		}
+		if (equivalent_usage == wacom_wac->hid_data.last_slot_field)
+			wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
 	}
 }
 
diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index 57e185f18d53da..e63b1e806e3470 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -14,6 +14,7 @@
 #define WACOM_MAX_REMOTES	5
 #define WACOM_STATUS_UNKNOWN	255
 #define WACOM_REMOTE_BATTERY_TIMEOUT	21000000000ll
+#define WACOM_AES_BATTERY_TIMEOUT       1800000
 
 /* packet length for individual models */
 #define WACOM_PKGLEN_BBFUN	 9
diff --git a/drivers/platform/chrome/cros_ec_ishtp.c b/drivers/platform/chrome/cros_ec_ishtp.c
index cb2031cf7106fe..5ac37bd024c884 100644
--- a/drivers/platform/chrome/cros_ec_ishtp.c
+++ b/drivers/platform/chrome/cros_ec_ishtp.c
@@ -367,55 +367,33 @@ static void ish_event_cb(struct ishtp_cl_device *cl_device)
 /**
  * cros_ish_init() - Init function for ISHTP client
  * @cros_ish_cl: ISHTP client instance
+ * @reset: true if called from reset handler
  *
  * This function complete the initializtion of the client.
  *
  * Return: 0 for success, negative error code for failure.
  */
-static int cros_ish_init(struct ishtp_cl *cros_ish_cl)
+static int cros_ish_init(struct ishtp_cl *cros_ish_cl, bool reset)
 {
 	int rv;
-	struct ishtp_device *dev;
-	struct ishtp_fw_client *fw_client;
 	struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
 
-	rv = ishtp_cl_link(cros_ish_cl);
-	if (rv) {
-		dev_err(cl_data_to_dev(client_data),
-			"ishtp_cl_link failed\n");
-		return rv;
-	}
-
-	dev = ishtp_get_ishtp_device(cros_ish_cl);
-
-	/* Connect to firmware client */
-	ishtp_set_tx_ring_size(cros_ish_cl, CROS_ISH_CL_TX_RING_SIZE);
-	ishtp_set_rx_ring_size(cros_ish_cl, CROS_ISH_CL_RX_RING_SIZE);
-
-	fw_client = ishtp_fw_cl_get_client(dev, &cros_ec_ishtp_id_table[0].guid);
-	if (!fw_client) {
-		dev_err(cl_data_to_dev(client_data),
-			"ish client uuid not found\n");
-		rv = -ENOENT;
-		goto err_cl_unlink;
-	}
-
-	ishtp_cl_set_fw_client_id(cros_ish_cl,
-				  ishtp_get_fw_client_id(fw_client));
-	ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_CONNECTING);
-
-	rv = ishtp_cl_connect(cros_ish_cl);
+	rv = ishtp_cl_establish_connection(cros_ish_cl,
+					   &cros_ec_ishtp_id_table[0].guid,
+					   CROS_ISH_CL_TX_RING_SIZE,
+					   CROS_ISH_CL_RX_RING_SIZE,
+					   reset);
 	if (rv) {
 		dev_err(cl_data_to_dev(client_data),
 			"client connect fail\n");
-		goto err_cl_unlink;
+		goto err_cl_disconnect;
 	}
 
 	ishtp_register_event_cb(client_data->cl_device, ish_event_cb);
 	return 0;
 
-err_cl_unlink:
-	ishtp_cl_unlink(cros_ish_cl);
+err_cl_disconnect:
+	ishtp_cl_destroy_connection(cros_ish_cl, reset);
 	return rv;
 }
 
@@ -427,10 +405,7 @@ err_cl_unlink:
  */
 static void cros_ish_deinit(struct ishtp_cl *cros_ish_cl)
 {
-	ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_DISCONNECTING);
-	ishtp_cl_disconnect(cros_ish_cl);
-	ishtp_cl_unlink(cros_ish_cl);
-	ishtp_cl_flush_queues(cros_ish_cl);
+	ishtp_cl_destroy_connection(cros_ish_cl, false);
 
 	/* Disband and free all Tx and Rx client-level rings */
 	ishtp_cl_free(cros_ish_cl);
@@ -592,7 +567,6 @@ static void reset_handler(struct work_struct *work)
 	int rv;
 	struct device *dev;
 	struct ishtp_cl *cros_ish_cl;
-	struct ishtp_cl_device *cl_device;
 	struct ishtp_cl_data *client_data =
 		container_of(work, struct ishtp_cl_data, work_ishtp_reset);
 
@@ -600,26 +574,11 @@ static void reset_handler(struct work_struct *work)
 	down_write(&init_lock);
 
 	cros_ish_cl = client_data->cros_ish_cl;
-	cl_device = client_data->cl_device;
 
-	/* Unlink, flush queues & start again */
-	ishtp_cl_unlink(cros_ish_cl);
-	ishtp_cl_flush_queues(cros_ish_cl);
-	ishtp_cl_free(cros_ish_cl);
-
-	cros_ish_cl = ishtp_cl_allocate(cl_device);
-	if (!cros_ish_cl) {
-		up_write(&init_lock);
-		return;
-	}
-
-	ishtp_set_drvdata(cl_device, cros_ish_cl);
-	ishtp_set_client_data(cros_ish_cl, client_data);
-	client_data->cros_ish_cl = cros_ish_cl;
+	ishtp_cl_destroy_connection(cros_ish_cl, true);
 
-	rv = cros_ish_init(cros_ish_cl);
+	rv = cros_ish_init(cros_ish_cl, true);
 	if (rv) {
-		ishtp_cl_free(cros_ish_cl);
 		dev_err(cl_data_to_dev(client_data), "Reset Failed\n");
 		up_write(&init_lock);
 		return;
@@ -672,7 +631,7 @@ static int cros_ec_ishtp_probe(struct ishtp_cl_device *cl_device)
 	INIT_WORK(&client_data->work_ec_evt,
 		  ish_evt_handler);
 
-	rv = cros_ish_init(cros_ish_cl);
+	rv = cros_ish_init(cros_ish_cl, false);
 	if (rv)
 		goto end_ishtp_cl_init_error;
 
@@ -690,10 +649,7 @@ static int cros_ec_ishtp_probe(struct ishtp_cl_device *cl_device)
 	return 0;
 
 end_cros_ec_dev_init_error:
-	ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_DISCONNECTING);
-	ishtp_cl_disconnect(cros_ish_cl);
-	ishtp_cl_unlink(cros_ish_cl);
-	ishtp_cl_flush_queues(cros_ish_cl);
+	ishtp_cl_destroy_connection(cros_ish_cl, false);
 	ishtp_put_device(cl_device);
 end_ishtp_cl_init_error:
 	ishtp_cl_free(cros_ish_cl);
diff --git a/include/linux/amd-pmf-io.h b/include/linux/amd-pmf-io.h
new file mode 100644
index 00000000000000..b4f8182052169c
--- /dev/null
+++ b/include/linux/amd-pmf-io.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * AMD Platform Management Framework Interface
+ *
+ * Copyright (c) 2023, Advanced Micro Devices, Inc.
+ * All Rights Reserved.
+ *
+ * Authors: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
+ *          Basavaraj Natikar <Basavaraj.Natikar@amd.com>
+ */
+
+#ifndef AMD_PMF_IO_H
+#define AMD_PMF_IO_H
+
+#include <linux/types.h>
+
+/**
+ * enum sfh_message_type - Query the SFH message type
+ * @MT_HPD: Message ID to know the Human presence info from MP2 FW
+ * @MT_ALS: Message ID to know the Ambient light info from MP2 FW
+ */
+enum sfh_message_type {
+	MT_HPD,
+	MT_ALS,
+};
+
+/**
+ * enum sfh_hpd_info - Query the Human presence information
+ * @SFH_NOT_DETECTED: Check the HPD connection information from MP2 FW
+ * @SFH_USER_PRESENT: Check if the user is present from HPD sensor
+ * @SFH_USER_AWAY: Check if the user is away from HPD sensor
+ */
+enum sfh_hpd_info {
+	SFH_NOT_DETECTED,
+	SFH_USER_PRESENT,
+	SFH_USER_AWAY,
+};
+
+/**
+ * struct amd_sfh_info - get HPD sensor info from MP2 FW
+ * @ambient_light: Populates the ambient light information
+ * @user_present: Populates the user presence information
+ */
+struct amd_sfh_info {
+	u32 ambient_light;
+	u8 user_present;
+};
+
+int amd_get_sfh_info(struct amd_sfh_info *sfh_info, enum sfh_message_type op);
+#endif
diff --git a/include/linux/hid.h b/include/linux/hid.h
index bf43f3ff666400..7c26db874ff032 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -912,7 +912,7 @@ extern bool hid_ignore(struct hid_device *);
 extern int hid_add_device(struct hid_device *);
 extern void hid_destroy_device(struct hid_device *);
 
-extern struct bus_type hid_bus_type;
+extern const struct bus_type hid_bus_type;
 
 extern int __must_check __hid_register_driver(struct hid_driver *,
 		struct module *, const char *mod_name);
diff --git a/include/linux/hid_bpf.h b/include/linux/hid_bpf.h
index e9afb61e6ee019..840cd254172d06 100644
--- a/include/linux/hid_bpf.h
+++ b/include/linux/hid_bpf.h
@@ -115,7 +115,7 @@ struct hid_bpf_ops {
 				  size_t len, enum hid_report_type rtype,
 				  enum hid_class_request reqtype);
 	struct module *owner;
-	struct bus_type *bus_type;
+	const struct bus_type *bus_type;
 };
 
 extern struct hid_bpf_ops *hid_bpf_ops;
diff --git a/include/linux/intel-ish-client-if.h b/include/linux/intel-ish-client-if.h
index f45f13304addd6..771622650247a7 100644
--- a/include/linux/intel-ish-client-if.h
+++ b/include/linux/intel-ish-client-if.h
@@ -94,6 +94,9 @@ int ishtp_cl_link(struct ishtp_cl *cl);
 void ishtp_cl_unlink(struct ishtp_cl *cl);
 int ishtp_cl_disconnect(struct ishtp_cl *cl);
 int ishtp_cl_connect(struct ishtp_cl *cl);
+int ishtp_cl_establish_connection(struct ishtp_cl *cl, const guid_t *uuid,
+				  int tx_size, int rx_size, bool reset);
+void ishtp_cl_destroy_connection(struct ishtp_cl *cl, bool reset);
 int ishtp_cl_send(struct ishtp_cl *cl, uint8_t *buf, size_t length);
 int ishtp_cl_flush_queues(struct ishtp_cl *cl);
 int ishtp_cl_io_rb_recycle(struct ishtp_cl_rb *rb);
diff --git a/tools/testing/selftests/hid/tests/base.py b/tools/testing/selftests/hid/tests/base.py
index 1305cfc9646e06..51433063b22707 100644
--- a/tools/testing/selftests/hid/tests/base.py
+++ b/tools/testing/selftests/hid/tests/base.py
@@ -14,7 +14,7 @@ import logging
 
 from hidtools.device.base_device import BaseDevice, EvdevMatch, SysfsFile
 from pathlib import Path
-from typing import Final
+from typing import Final, List, Tuple
 
 logger = logging.getLogger("hidtools.test.base")
 
@@ -155,7 +155,7 @@ class BaseTestCase:
         # if any module is not available (not compiled), the test will skip.
         # Each element is a tuple '(kernel driver name, kernel module)',
         # for example ("playstation", "hid-playstation")
-        kernel_modules = []
+        kernel_modules: List[Tuple[str, str]] = []
 
         def assertInputEventsIn(self, expected_events, effective_events):
             effective_events = effective_events.copy()
@@ -238,8 +238,7 @@ class BaseTestCase:
             try:
                 with HIDTestUdevRule.instance():
                     with new_uhdev as self.uhdev:
-                        skip_cond = request.node.get_closest_marker("skip_if_uhdev")
-                        if skip_cond:
+                        for skip_cond in request.node.iter_markers("skip_if_uhdev"):
                             test, message, *rest = skip_cond.args
 
                             if test(self.uhdev):
diff --git a/tools/testing/selftests/hid/tests/test_mouse.py b/tools/testing/selftests/hid/tests/test_mouse.py
index fd2ba62e783abe..66daf7e5975ca5 100644
--- a/tools/testing/selftests/hid/tests/test_mouse.py
+++ b/tools/testing/selftests/hid/tests/test_mouse.py
@@ -52,13 +52,13 @@ class BaseMouse(base.UHIDTestDevice):
         :param reportID: the numeric report ID for this report, if needed
         """
         if buttons is not None:
-            l, r, m = buttons
-            if l is not None:
-                self.left = l
-            if r is not None:
-                self.right = r
-            if m is not None:
-                self.middle = m
+            left, right, middle = buttons
+            if left is not None:
+                self.left = left
+            if right is not None:
+                self.right = right
+            if middle is not None:
+                self.middle = middle
         left = self.left
         right = self.right
         middle = self.middle
diff --git a/tools/testing/selftests/hid/tests/test_tablet.py b/tools/testing/selftests/hid/tests/test_tablet.py
index 303ffff9ee8dc4..903f19f7cbe9f4 100644
--- a/tools/testing/selftests/hid/tests/test_tablet.py
+++ b/tools/testing/selftests/hid/tests/test_tablet.py
@@ -13,62 +13,133 @@ from hidtools.util import BusType
 import libevdev
 import logging
 import pytest
-from typing import Dict, Tuple
+from typing import Dict, List, Optional, Tuple
 
 logger = logging.getLogger("hidtools.test.tablet")
 
 
+class BtnTouch(Enum):
+    """Represents whether the BTN_TOUCH event is set to True or False"""
+
+    DOWN = True
+    UP = False
+
+
+class ToolType(Enum):
+    PEN = libevdev.EV_KEY.BTN_TOOL_PEN
+    RUBBER = libevdev.EV_KEY.BTN_TOOL_RUBBER
+
+
+class BtnPressed(Enum):
+    """Represents whether a button is pressed on the stylus"""
+
+    PRIMARY_PRESSED = libevdev.EV_KEY.BTN_STYLUS
+    SECONDARY_PRESSED = libevdev.EV_KEY.BTN_STYLUS2
+
+
 class PenState(Enum):
     """Pen states according to Microsoft reference:
     https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/windows-pen-states
-    """
 
-    PEN_IS_OUT_OF_RANGE = (False, None)
-    PEN_IS_IN_RANGE = (False, libevdev.EV_KEY.BTN_TOOL_PEN)
-    PEN_IS_IN_CONTACT = (True, libevdev.EV_KEY.BTN_TOOL_PEN)
-    PEN_IS_IN_RANGE_WITH_ERASING_INTENT = (False, libevdev.EV_KEY.BTN_TOOL_RUBBER)
-    PEN_IS_ERASING = (True, libevdev.EV_KEY.BTN_TOOL_RUBBER)
+    We extend it with the various buttons when we need to check them.
+    """
 
-    def __init__(self, touch, tool):
-        self.touch = touch
-        self.tool = tool
+    PEN_IS_OUT_OF_RANGE = BtnTouch.UP, None, None
+    PEN_IS_IN_RANGE = BtnTouch.UP, ToolType.PEN, None
+    PEN_IS_IN_RANGE_WITH_BUTTON = BtnTouch.UP, ToolType.PEN, BtnPressed.PRIMARY_PRESSED
+    PEN_IS_IN_RANGE_WITH_SECOND_BUTTON = (
+        BtnTouch.UP,
+        ToolType.PEN,
+        BtnPressed.SECONDARY_PRESSED,
+    )
+    PEN_IS_IN_CONTACT = BtnTouch.DOWN, ToolType.PEN, None
+    PEN_IS_IN_CONTACT_WITH_BUTTON = (
+        BtnTouch.DOWN,
+        ToolType.PEN,
+        BtnPressed.PRIMARY_PRESSED,
+    )
+    PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON = (
+        BtnTouch.DOWN,
+        ToolType.PEN,
+        BtnPressed.SECONDARY_PRESSED,
+    )
+    PEN_IS_IN_RANGE_WITH_ERASING_INTENT = BtnTouch.UP, ToolType.RUBBER, None
+    PEN_IS_IN_RANGE_WITH_ERASING_INTENT_WITH_BUTTON = (
+        BtnTouch.UP,
+        ToolType.RUBBER,
+        BtnPressed.PRIMARY_PRESSED,
+    )
+    PEN_IS_IN_RANGE_WITH_ERASING_INTENT_WITH_SECOND_BUTTON = (
+        BtnTouch.UP,
+        ToolType.RUBBER,
+        BtnPressed.SECONDARY_PRESSED,
+    )
+    PEN_IS_ERASING = BtnTouch.DOWN, ToolType.RUBBER, None
+    PEN_IS_ERASING_WITH_BUTTON = (
+        BtnTouch.DOWN,
+        ToolType.RUBBER,
+        BtnPressed.PRIMARY_PRESSED,
+    )
+    PEN_IS_ERASING_WITH_SECOND_BUTTON = (
+        BtnTouch.DOWN,
+        ToolType.RUBBER,
+        BtnPressed.SECONDARY_PRESSED,
+    )
+
+    def __init__(self, touch: BtnTouch, tool: Optional[ToolType], button: Optional[BtnPressed]):
+        self.touch = touch  # type: ignore
+        self.tool = tool  # type: ignore
+        self.button = button  # type: ignore
 
     @classmethod
     def from_evdev(cls, evdev) -> "PenState":
-        touch = bool(evdev.value[libevdev.EV_KEY.BTN_TOUCH])
+        touch = BtnTouch(evdev.value[libevdev.EV_KEY.BTN_TOUCH])
         tool = None
+        button = None
         if (
             evdev.value[libevdev.EV_KEY.BTN_TOOL_RUBBER]
             and not evdev.value[libevdev.EV_KEY.BTN_TOOL_PEN]
         ):
-            tool = libevdev.EV_KEY.BTN_TOOL_RUBBER
+            tool = ToolType(libevdev.EV_KEY.BTN_TOOL_RUBBER)
         elif (
             evdev.value[libevdev.EV_KEY.BTN_TOOL_PEN]
             and not evdev.value[libevdev.EV_KEY.BTN_TOOL_RUBBER]
         ):
-            tool = libevdev.EV_KEY.BTN_TOOL_PEN
+            tool = ToolType(libevdev.EV_KEY.BTN_TOOL_PEN)
         elif (
             evdev.value[libevdev.EV_KEY.BTN_TOOL_PEN]
             or evdev.value[libevdev.EV_KEY.BTN_TOOL_RUBBER]
         ):
             raise ValueError("2 tools are not allowed")
 
-        return cls((touch, tool))
+        # we take only the highest button in account
+        for b in [libevdev.EV_KEY.BTN_STYLUS, libevdev.EV_KEY.BTN_STYLUS2]:
+            if bool(evdev.value[b]):
+                button = BtnPressed(b)
 
-    def apply(self, events) -> "PenState":
+        # the kernel tends to insert an EV_SYN once removing the tool, so
+        # the button will be released after
+        if tool is None:
+            button = None
+
+        return cls((touch, tool, button))  # type: ignore
+
+    def apply(self, events: List[libevdev.InputEvent], strict: bool) -> "PenState":
         if libevdev.EV_SYN.SYN_REPORT in events:
             raise ValueError("EV_SYN is in the event sequence")
         touch = self.touch
         touch_found = False
         tool = self.tool
         tool_found = False
+        button = self.button
+        button_found = False
 
         for ev in events:
             if ev == libevdev.InputEvent(libevdev.EV_KEY.BTN_TOUCH):
                 if touch_found:
                     raise ValueError(f"duplicated BTN_TOUCH in {events}")
                 touch_found = True
-                touch = bool(ev.value)
+                touch = BtnTouch(ev.value)
             elif ev in (
                 libevdev.InputEvent(libevdev.EV_KEY.BTN_TOOL_PEN),
                 libevdev.InputEvent(libevdev.EV_KEY.BTN_TOOL_RUBBER),
@@ -76,35 +147,55 @@ class PenState(Enum):
                 if tool_found:
                     raise ValueError(f"duplicated BTN_TOOL_* in {events}")
                 tool_found = True
-                if ev.value:
-                    tool = ev.code
-                else:
-                    tool = None
-
-        new_state = PenState((touch, tool))
-        assert (
-            new_state in self.valid_transitions()
-        ), f"moving from {self} to {new_state} is forbidden"
+                tool = ToolType(ev.code) if ev.value else None
+            elif ev in (
+                libevdev.InputEvent(libevdev.EV_KEY.BTN_STYLUS),
+                libevdev.InputEvent(libevdev.EV_KEY.BTN_STYLUS2),
+            ):
+                if button_found:
+                    raise ValueError(f"duplicated BTN_STYLUS* in {events}")
+                button_found = True
+                button = BtnPressed(ev.code) if ev.value else None
+
+        # the kernel tends to insert an EV_SYN once removing the tool, so
+        # the button will be released after
+        if tool is None:
+            button = None
+
+        new_state = PenState((touch, tool, button))  # type: ignore
+        if strict:
+            assert (
+                new_state in self.valid_transitions()
+            ), f"moving from {self} to {new_state} is forbidden"
+        else:
+            assert (
+                new_state in self.historically_tolerated_transitions()
+            ), f"moving from {self} to {new_state} is forbidden"
 
         return new_state
 
     def valid_transitions(self) -> Tuple["PenState", ...]:
-        """Following the state machine in the URL above, with a couple of addition
-        for skipping the in-range state, due to historical reasons.
+        """Following the state machine in the URL above.
 
         Note that those transitions are from the evdev point of view, not HID"""
         if self == PenState.PEN_IS_OUT_OF_RANGE:
             return (
                 PenState.PEN_IS_OUT_OF_RANGE,
                 PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
                 PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT,
                 PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
                 PenState.PEN_IS_ERASING,
             )
 
         if self == PenState.PEN_IS_IN_RANGE:
             return (
                 PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
                 PenState.PEN_IS_OUT_OF_RANGE,
                 PenState.PEN_IS_IN_CONTACT,
             )
@@ -112,8 +203,9 @@ class PenState(Enum):
         if self == PenState.PEN_IS_IN_CONTACT:
             return (
                 PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
                 PenState.PEN_IS_IN_RANGE,
-                PenState.PEN_IS_OUT_OF_RANGE,
             )
 
         if self == PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT:
@@ -127,113 +219,126 @@ class PenState(Enum):
             return (
                 PenState.PEN_IS_ERASING,
                 PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT,
+            )
+
+        if self == PenState.PEN_IS_IN_RANGE_WITH_BUTTON:
+            return (
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
                 PenState.PEN_IS_OUT_OF_RANGE,
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
             )
 
-        return tuple()
+        if self == PenState.PEN_IS_IN_CONTACT_WITH_BUTTON:
+            return (
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+            )
 
+        if self == PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON:
+            return (
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_OUT_OF_RANGE,
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+            )
 
-class Data(object):
-    pass
+        if self == PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON:
+            return (
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+            )
 
+        return tuple()
 
-class Pen(object):
-    def __init__(self, x, y):
-        self.x = x
-        self.y = y
-        self.tipswitch = False
-        self.tippressure = 15
-        self.azimuth = 0
-        self.inrange = False
-        self.width = 10
-        self.height = 10
-        self.barrelswitch = False
-        self.invert = False
-        self.eraser = False
-        self.x_tilt = 0
-        self.y_tilt = 0
-        self.twist = 0
-        self._old_values = None
-        self.current_state = None
+    def historically_tolerated_transitions(self) -> Tuple["PenState", ...]:
+        """Following the state machine in the URL above, with a couple of addition
+        for skipping the in-range state, due to historical reasons.
 
-    def _restore(self):
-        if self._old_values is not None:
-            for i in [
-                "x",
-                "y",
-                "tippressure",
-                "azimuth",
-                "width",
-                "height",
-                "twist",
-                "x_tilt",
-                "y_tilt",
-            ]:
-                setattr(self, i, getattr(self._old_values, i))
+        Note that those transitions are from the evdev point of view, not HID"""
+        if self == PenState.PEN_IS_OUT_OF_RANGE:
+            return (
+                PenState.PEN_IS_OUT_OF_RANGE,
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_ERASING,
+            )
 
-    def move_to(self, state):
-        # fill in the previous values
-        if self.current_state == PenState.PEN_IS_OUT_OF_RANGE:
-            self._restore()
+        if self == PenState.PEN_IS_IN_RANGE:
+            return (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_OUT_OF_RANGE,
+                PenState.PEN_IS_IN_CONTACT,
+            )
 
-        print(f"\n  *** pen is moving to {state} ***")
+        if self == PenState.PEN_IS_IN_CONTACT:
+            return (
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_OUT_OF_RANGE,
+            )
 
-        if state == PenState.PEN_IS_OUT_OF_RANGE:
-            self._old_values = copy.copy(self)
-            self.x = 0
-            self.y = 0
-            self.tipswitch = False
-            self.tippressure = 0
-            self.azimuth = 0
-            self.inrange = False
-            self.width = 0
-            self.height = 0
-            self.invert = False
-            self.eraser = False
-            self.x_tilt = 0
-            self.y_tilt = 0
-            self.twist = 0
-        elif state == PenState.PEN_IS_IN_RANGE:
-            self.tipswitch = False
-            self.inrange = True
-            self.invert = False
-            self.eraser = False
-        elif state == PenState.PEN_IS_IN_CONTACT:
-            self.tipswitch = True
-            self.inrange = True
-            self.invert = False
-            self.eraser = False
-        elif state == PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT:
-            self.tipswitch = False
-            self.inrange = True
-            self.invert = True
-            self.eraser = False
-        elif state == PenState.PEN_IS_ERASING:
-            self.tipswitch = False
-            self.inrange = True
-            self.invert = True
-            self.eraser = True
+        if self == PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT:
+            return (
+                PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT,
+                PenState.PEN_IS_OUT_OF_RANGE,
+                PenState.PEN_IS_ERASING,
+            )
 
-        self.current_state = state
+        if self == PenState.PEN_IS_ERASING:
+            return (
+                PenState.PEN_IS_ERASING,
+                PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT,
+                PenState.PEN_IS_OUT_OF_RANGE,
+            )
 
-    def __assert_axis(self, evdev, axis, value):
-        if (
-            axis == libevdev.EV_KEY.BTN_TOOL_RUBBER
-            and evdev.value[libevdev.EV_KEY.BTN_TOOL_RUBBER] is None
-        ):
-            return
+        if self == PenState.PEN_IS_IN_RANGE_WITH_BUTTON:
+            return (
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_OUT_OF_RANGE,
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+            )
 
-        assert (
-            evdev.value[axis] == value
-        ), f"assert evdev.value[{axis}] ({evdev.value[axis]}) != {value}"
+        if self == PenState.PEN_IS_IN_CONTACT_WITH_BUTTON:
+            return (
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_OUT_OF_RANGE,
+            )
 
-    def assert_expected_input_events(self, evdev):
-        assert evdev.value[libevdev.EV_ABS.ABS_X] == self.x
-        assert evdev.value[libevdev.EV_ABS.ABS_Y] == self.y
-        assert self.current_state == PenState.from_evdev(evdev)
+        if self == PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON:
+            return (
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_OUT_OF_RANGE,
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+            )
+
+        if self == PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON:
+            return (
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_OUT_OF_RANGE,
+            )
+
+        return tuple()
 
     @staticmethod
-    def legal_transitions() -> Dict[str, Tuple[PenState, ...]]:
+    def legal_transitions() -> Dict[str, Tuple["PenState", ...]]:
         """This is the first half of the Windows Pen Implementation state machine:
         we don't have Invert nor Erase bits, so just move in/out-of-range or proximity.
         https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/windows-pen-states
@@ -259,7 +364,7 @@ class Pen(object):
         }
 
     @staticmethod
-    def legal_transitions_with_invert() -> Dict[str, Tuple[PenState, ...]]:
+    def legal_transitions_with_invert() -> Dict[str, Tuple["PenState", ...]]:
         """This is the second half of the Windows Pen Implementation state machine:
         we now have Invert and Erase bits, so move in/out or proximity with the intend
         to erase.
@@ -297,7 +402,106 @@ class Pen(object):
         }
 
     @staticmethod
-    def tolerated_transitions() -> Dict[str, Tuple[PenState, ...]]:
+    def legal_transitions_with_primary_button() -> Dict[str, Tuple["PenState", ...]]:
+        """We revisit the Windows Pen Implementation state machine:
+        we now have a primary button.
+        """
+        return {
+            "hover-button": (PenState.PEN_IS_IN_RANGE_WITH_BUTTON,),
+            "hover-button -> out-of-range": (
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_OUT_OF_RANGE,
+            ),
+            "in-range -> button-press": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+            ),
+            "in-range -> button-press -> button-release": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
+            ),
+            "in-range -> touch -> button-press -> button-release": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+                PenState.PEN_IS_IN_CONTACT,
+            ),
+            "in-range -> touch -> button-press -> release -> button-release": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
+            ),
+            "in-range -> button-press -> touch -> release -> button-release": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
+            ),
+            "in-range -> button-press -> touch -> button-release -> release": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_BUTTON,
+                PenState.PEN_IS_IN_CONTACT_WITH_BUTTON,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_RANGE,
+            ),
+        }
+
+    @staticmethod
+    def legal_transitions_with_secondary_button() -> Dict[str, Tuple["PenState", ...]]:
+        """We revisit the Windows Pen Implementation state machine:
+        we now have a secondary button.
+        Note: we don't looks for 2 buttons interactions.
+        """
+        return {
+            "hover-button": (PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,),
+            "hover-button -> out-of-range": (
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_OUT_OF_RANGE,
+            ),
+            "in-range -> button-press": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+            ),
+            "in-range -> button-press -> button-release": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
+            ),
+            "in-range -> touch -> button-press -> button-release": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_CONTACT,
+            ),
+            "in-range -> touch -> button-press -> release -> button-release": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
+            ),
+            "in-range -> button-press -> touch -> release -> button-release": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_RANGE,
+            ),
+            "in-range -> button-press -> touch -> button-release -> release": (
+                PenState.PEN_IS_IN_RANGE,
+                PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON,
+                PenState.PEN_IS_IN_CONTACT,
+                PenState.PEN_IS_IN_RANGE,
+            ),
+        }
+
+    @staticmethod
+    def tolerated_transitions() -> Dict[str, Tuple["PenState", ...]]:
         """This is not adhering to the Windows Pen Implementation state machine
         but we should expect the kernel to behave properly, mostly for historical
         reasons."""
@@ -310,7 +514,7 @@ class Pen(object):
         }
 
     @staticmethod
-    def tolerated_transitions_with_invert() -> Dict[str, Tuple[PenState, ...]]:
+    def tolerated_transitions_with_invert() -> Dict[str, Tuple["PenState", ...]]:
         """This is the second half of the Windows Pen Implementation state machine:
         we now have Invert and Erase bits, so move in/out or proximity with the intend
         to erase.
@@ -325,7 +529,7 @@ class Pen(object):
         }
 
     @staticmethod
-    def broken_transitions() -> Dict[str, Tuple[PenState, ...]]:
+    def broken_transitions() -> Dict[str, Tuple["PenState", ...]]:
         """Those tests are definitely not part of the Windows specification.
         However, a half broken device might export those transitions.
         For example, a pen that has the eraser button might wobble between
@@ -363,6 +567,61 @@ class Pen(object):
         }
 
 
+class Pen(object):
+    def __init__(self, x, y):
+        self.x = x
+        self.y = y
+        self.tipswitch = False
+        self.tippressure = 15
+        self.azimuth = 0
+        self.inrange = False
+        self.width = 10
+        self.height = 10
+        self.barrelswitch = False
+        self.secondarybarrelswitch = False
+        self.invert = False
+        self.eraser = False
+        self.xtilt = 1
+        self.ytilt = 1
+        self.twist = 1
+        self._old_values = None
+        self.current_state = None
+
+    def restore(self):
+        if self._old_values is not None:
+            for i in [
+                "x",
+                "y",
+                "tippressure",
+                "azimuth",
+                "width",
+                "height",
+                "twist",
+                "xtilt",
+                "ytilt",
+            ]:
+                setattr(self, i, getattr(self._old_values, i))
+
+    def backup(self):
+        self._old_values = copy.copy(self)
+
+    def __assert_axis(self, evdev, axis, value):
+        if (
+            axis == libevdev.EV_KEY.BTN_TOOL_RUBBER
+            and evdev.value[libevdev.EV_KEY.BTN_TOOL_RUBBER] is None
+        ):
+            return
+
+        assert (
+            evdev.value[axis] == value
+        ), f"assert evdev.value[{axis}] ({evdev.value[axis]}) != {value}"
+
+    def assert_expected_input_events(self, evdev):
+        assert evdev.value[libevdev.EV_ABS.ABS_X] == self.x
+        assert evdev.value[libevdev.EV_ABS.ABS_Y] == self.y
+        assert self.current_state == PenState.from_evdev(evdev)
+
+
 class PenDigitizer(base.UHIDTestDevice):
     def __init__(
         self,
@@ -388,6 +647,89 @@ class PenDigitizer(base.UHIDTestDevice):
                     continue
                 self.fields = [f.usage_name for f in r]
 
+    def move_to(self, pen, state):
+        # fill in the previous values
+        if pen.current_state == PenState.PEN_IS_OUT_OF_RANGE:
+            pen.restore()
+
+        print(f"\n  *** pen is moving to {state} ***")
+
+        if state == PenState.PEN_IS_OUT_OF_RANGE:
+            pen.backup()
+            pen.x = 0
+            pen.y = 0
+            pen.tipswitch = False
+            pen.tippressure = 0
+            pen.azimuth = 0
+            pen.inrange = False
+            pen.width = 0
+            pen.height = 0
+            pen.invert = False
+            pen.eraser = False
+            pen.xtilt = 0
+            pen.ytilt = 0
+            pen.twist = 0
+            pen.barrelswitch = False
+            pen.secondarybarrelswitch = False
+        elif state == PenState.PEN_IS_IN_RANGE:
+            pen.tipswitch = False
+            pen.inrange = True
+            pen.invert = False
+            pen.eraser = False
+            pen.barrelswitch = False
+            pen.secondarybarrelswitch = False
+        elif state == PenState.PEN_IS_IN_CONTACT:
+            pen.tipswitch = True
+            pen.inrange = True
+            pen.invert = False
+            pen.eraser = False
+            pen.barrelswitch = False
+            pen.secondarybarrelswitch = False
+        elif state == PenState.PEN_IS_IN_RANGE_WITH_BUTTON:
+            pen.tipswitch = False
+            pen.inrange = True
+            pen.invert = False
+            pen.eraser = False
+            pen.barrelswitch = True
+            pen.secondarybarrelswitch = False
+        elif state == PenState.PEN_IS_IN_CONTACT_WITH_BUTTON:
+            pen.tipswitch = True
+            pen.inrange = True
+            pen.invert = False
+            pen.eraser = False
+            pen.barrelswitch = True
+            pen.secondarybarrelswitch = False
+        elif state == PenState.PEN_IS_IN_RANGE_WITH_SECOND_BUTTON:
+            pen.tipswitch = False
+            pen.inrange = True
+            pen.invert = False
+            pen.eraser = False
+            pen.barrelswitch = False
+            pen.secondarybarrelswitch = True
+        elif state == PenState.PEN_IS_IN_CONTACT_WITH_SECOND_BUTTON:
+            pen.tipswitch = True
+            pen.inrange = True
+            pen.invert = False
+            pen.eraser = False
+            pen.barrelswitch = False
+            pen.secondarybarrelswitch = True
+        elif state == PenState.PEN_IS_IN_RANGE_WITH_ERASING_INTENT:
+            pen.tipswitch = False
+            pen.inrange = True
+            pen.invert = True
+            pen.eraser = False
+            pen.barrelswitch = False
+            pen.secondarybarrelswitch = False
+        elif state == PenState.PEN_IS_ERASING:
+            pen.tipswitch = False
+            pen.inrange = True
+            pen.invert = False
+            pen.eraser = True
+            pen.barrelswitch = False
+            pen.secondarybarrelswitch = False
+
+        pen.current_state = state
+
     def event(self, pen):
         rs = []
         r = self.create_report(application=self.cur_application, data=pen)
@@ -435,10 +777,14 @@ class BaseTest:
             self.debug_reports(r, uhdev, events)
             return events
 
-        def validate_transitions(self, from_state, pen, evdev, events):
+        def validate_transitions(
+            self, from_state, pen, evdev, events, allow_intermediate_states
+        ):
             # check that the final state is correct
             pen.assert_expected_input_events(evdev)
 
+            state = from_state
+
             # check that the transitions are valid
             sync_events = []
             while libevdev.InputEvent(libevdev.EV_SYN.SYN_REPORT) in events:
@@ -448,12 +794,12 @@ class BaseTest:
                 events = events[idx + 1 :]
 
                 # now check for a valid transition
-                from_state = from_state.apply(sync_events)
+                state = state.apply(sync_events, not allow_intermediate_states)
 
             if events:
-                from_state = from_state.apply(sync_events)
+                state = state.apply(sync_events, not allow_intermediate_states)
 
-        def _test_states(self, state_list, scribble):
+        def _test_states(self, state_list, scribble, allow_intermediate_states):
             """Internal method to test against a list of
             transition between states.
             state_list is a list of PenState objects
@@ -466,9 +812,11 @@ class BaseTest:
             cur_state = PenState.PEN_IS_OUT_OF_RANGE
 
             p = Pen(50, 60)
-            p.move_to(PenState.PEN_IS_OUT_OF_RANGE)
+            uhdev.move_to(p, PenState.PEN_IS_OUT_OF_RANGE)
             events = self.post(uhdev, p)
-            self.validate_transitions(cur_state, p, evdev, events)
+            self.validate_transitions(
+                cur_state, p, evdev, events, allow_intermediate_states
+            )
 
             cur_state = p.current_state
 
@@ -477,38 +825,77 @@ class BaseTest:
                     p.x += 1
                     p.y -= 1
                     events = self.post(uhdev, p)
-                    self.validate_transitions(cur_state, p, evdev, events)
+                    self.validate_transitions(
+                        cur_state, p, evdev, events, allow_intermediate_states
+                    )
                     assert len(events) >= 3  # X, Y, SYN
-                p.move_to(state)
+                uhdev.move_to(p, state)
                 if scribble and state != PenState.PEN_IS_OUT_OF_RANGE:
                     p.x += 1
                     p.y -= 1
                 events = self.post(uhdev, p)
-                self.validate_transitions(cur_state, p, evdev, events)
+                self.validate_transitions(
+                    cur_state, p, evdev, events, allow_intermediate_states
+                )
                 cur_state = p.current_state
 
         @pytest.mark.parametrize("scribble", [True, False], ids=["scribble", "static"])
         @pytest.mark.parametrize(
             "state_list",
-            [pytest.param(v, id=k) for k, v in Pen.legal_transitions().items()],
+            [pytest.param(v, id=k) for k, v in PenState.legal_transitions().items()],
         )
         def test_valid_pen_states(self, state_list, scribble):
             """This is the first half of the Windows Pen Implementation state machine:
             we don't have Invert nor Erase bits, so just move in/out-of-range or proximity.
             https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/windows-pen-states
             """
-            self._test_states(state_list, scribble)
+            self._test_states(state_list, scribble, allow_intermediate_states=False)
 
         @pytest.mark.parametrize("scribble", [True, False], ids=["scribble", "static"])
         @pytest.mark.parametrize(
             "state_list",
-            [pytest.param(v, id=k) for k, v in Pen.tolerated_transitions().items()],
+            [
+                pytest.param(v, id=k)
+                for k, v in PenState.tolerated_transitions().items()
+            ],
         )
         def test_tolerated_pen_states(self, state_list, scribble):
             """This is not adhering to the Windows Pen Implementation state machine
             but we should expect the kernel to behave properly, mostly for historical
             reasons."""
-            self._test_states(state_list, scribble)
+            self._test_states(state_list, scribble, allow_intermediate_states=True)
+
+        @pytest.mark.skip_if_uhdev(
+            lambda uhdev: "Barrel Switch" not in uhdev.fields,
+            "Device not compatible, missing Barrel Switch usage",
+        )
+        @pytest.mark.parametrize("scribble", [True, False], ids=["scribble", "static"])
+        @pytest.mark.parametrize(
+            "state_list",
+            [
+                pytest.param(v, id=k)
+                for k, v in PenState.legal_transitions_with_primary_button().items()
+            ],
+        )
+        def test_valid_primary_button_pen_states(self, state_list, scribble):
+            """Rework the transition state machine by adding the primary button."""
+            self._test_states(state_list, scribble, allow_intermediate_states=False)
+
+        @pytest.mark.skip_if_uhdev(
+            lambda uhdev: "Secondary Barrel Switch" not in uhdev.fields,
+            "Device not compatible, missing Secondary Barrel Switch usage",
+        )
+        @pytest.mark.parametrize("scribble", [True, False], ids=["scribble", "static"])
+        @pytest.mark.parametrize(
+            "state_list",
+            [
+                pytest.param(v, id=k)
+                for k, v in PenState.legal_transitions_with_secondary_button().items()
+            ],
+        )
+        def test_valid_secondary_button_pen_states(self, state_list, scribble):
+            """Rework the transition state machine by adding the secondary button."""
+            self._test_states(state_list, scribble, allow_intermediate_states=False)
 
         @pytest.mark.skip_if_uhdev(
             lambda uhdev: "Invert" not in uhdev.fields,
@@ -519,7 +906,7 @@ class BaseTest:
             "state_list",
             [
                 pytest.param(v, id=k)
-                for k, v in Pen.legal_transitions_with_invert().items()
+                for k, v in PenState.legal_transitions_with_invert().items()
             ],
         )
         def test_valid_invert_pen_states(self, state_list, scribble):
@@ -528,7 +915,7 @@ class BaseTest:
             to erase.
             https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/windows-pen-states
             """
-            self._test_states(state_list, scribble)
+            self._test_states(state_list, scribble, allow_intermediate_states=False)
 
         @pytest.mark.skip_if_uhdev(
             lambda uhdev: "Invert" not in uhdev.fields,
@@ -539,7 +926,7 @@ class BaseTest:
             "state_list",
             [
                 pytest.param(v, id=k)
-                for k, v in Pen.tolerated_transitions_with_invert().items()
+                for k, v in PenState.tolerated_transitions_with_invert().items()
             ],
         )
         def test_tolerated_invert_pen_states(self, state_list, scribble):
@@ -548,7 +935,7 @@ class BaseTest:
             to erase.
             https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/windows-pen-states
             """
-            self._test_states(state_list, scribble)
+            self._test_states(state_list, scribble, allow_intermediate_states=True)
 
         @pytest.mark.skip_if_uhdev(
             lambda uhdev: "Invert" not in uhdev.fields,
@@ -557,7 +944,7 @@ class BaseTest:
         @pytest.mark.parametrize("scribble", [True, False], ids=["scribble", "static"])
         @pytest.mark.parametrize(
             "state_list",
-            [pytest.param(v, id=k) for k, v in Pen.broken_transitions().items()],
+            [pytest.param(v, id=k) for k, v in PenState.broken_transitions().items()],
         )
         def test_tolerated_broken_pen_states(self, state_list, scribble):
             """Those tests are definitely not part of the Windows specification.
@@ -565,102 +952,7 @@ class BaseTest:
             For example, a pen that has the eraser button might wobble between
             touching and erasing if the tablet doesn't enforce the Windows
             state machine."""
-            self._test_states(state_list, scribble)
-
-        @pytest.mark.skip_if_uhdev(
-            lambda uhdev: "Barrel Switch" not in uhdev.fields,
-            "Device not compatible, missing Barrel Switch usage",
-        )
-        def test_primary_button(self):
-            """Primary button (stylus) pressed, reports as pressed even while hovering.
-            Actual reporting from the device: hid=TIPSWITCH,BARRELSWITCH,INRANGE (code=TOUCH,STYLUS,PEN):
-              { 0, 0, 1 } <- hover
-              { 0, 1, 1 } <- primary button pressed
-              { 0, 1, 1 } <- liftoff
-              { 0, 0, 0 } <- leaves
-            """
-
-            uhdev = self.uhdev
-            evdev = uhdev.get_evdev()
-
-            p = Pen(50, 60)
-            p.inrange = True
-            events = self.post(uhdev, p)
-            assert libevdev.InputEvent(libevdev.EV_KEY.BTN_TOOL_PEN, 1) in events
-            assert evdev.value[libevdev.EV_ABS.ABS_X] == 50
-            assert evdev.value[libevdev.EV_ABS.ABS_Y] == 60
-            assert not evdev.value[libevdev.EV_KEY.BTN_STYLUS]
-
-            p.barrelswitch = True
-            events = self.post(uhdev, p)
-            assert libevdev.InputEvent(libevdev.EV_KEY.BTN_STYLUS, 1) in events
-
-            p.x += 1
-            p.y -= 1
-            events = self.post(uhdev, p)
-            assert len(events) == 3  # X, Y, SYN
-            assert libevdev.InputEvent(libevdev.EV_ABS.ABS_X, 51) in events
-            assert libevdev.InputEvent(libevdev.EV_ABS.ABS_Y, 59) in events
-
-            p.barrelswitch = False
-            events = self.post(uhdev, p)
-            assert libevdev.InputEvent(libevdev.EV_KEY.BTN_STYLUS, 0) in events
-
-            p.inrange = False
-            events = self.post(uhdev, p)
-            assert libevdev.InputEvent(libevdev.EV_KEY.BTN_TOOL_PEN, 0) in events
-
-        @pytest.mark.skip_if_uhdev(
-            lambda uhdev: "Barrel Switch" not in uhdev.fields,
-            "Device not compatible, missing Barrel Switch usage",
-        )
-        def test_contact_primary_button(self):
-            """Primary button (stylus) pressed, reports as pressed even while hovering.
-            Actual reporting from the device: hid=TIPSWITCH,BARRELSWITCH,INRANGE (code=TOUCH,STYLUS,PEN):
-              { 0, 0, 1 } <- hover
-              { 0, 1, 1 } <- primary button pressed
-              { 1, 1, 1 } <- touch-down
-              { 1, 1, 1 } <- still touch, scribble on the screen
-              { 0, 1, 1 } <- liftoff
-              { 0, 0, 0 } <- leaves
-            """
-
-            uhdev = self.uhdev
-            evdev = uhdev.get_evdev()
-
-            p = Pen(50, 60)
-            p.inrange = True
-            events = self.post(uhdev, p)
-            assert libevdev.InputEvent(libevdev.EV_KEY.BTN_TOOL_PEN, 1) in events
-            assert evdev.value[libevdev.EV_ABS.ABS_X] == 50
-            assert evdev.value[libevdev.EV_ABS.ABS_Y] == 60
-            assert not evdev.value[libevdev.EV_KEY.BTN_STYLUS]
-
-            p.barrelswitch = True
-            events = self.post(uhdev, p)
-            assert libevdev.InputEvent(libevdev.EV_KEY.BTN_STYLUS, 1) in events
-
-            p.tipswitch = True
-            events = self.post(uhdev, p)
-            assert libevdev.InputEvent(libevdev.EV_KEY.BTN_TOUCH, 1) in events
-            assert evdev.value[libevdev.EV_KEY.BTN_STYLUS]
-
-            p.x += 1
-            p.y -= 1
-            events = self.post(uhdev, p)
-            assert len(events) == 3  # X, Y, SYN
-            assert libevdev.InputEvent(libevdev.EV_ABS.ABS_X, 51) in events
-            assert libevdev.InputEvent(libevdev.EV_ABS.ABS_Y, 59) in events
-
-            p.tipswitch = False
-            events = self.post(uhdev, p)
-            assert libevdev.InputEvent(libevdev.EV_KEY.BTN_TOUCH, 0) in events
-
-            p.barrelswitch = False
-            p.inrange = False
-            events = self.post(uhdev, p)
-            assert libevdev.InputEvent(libevdev.EV_KEY.BTN_TOOL_PEN, 0) in events
-            assert libevdev.InputEvent(libevdev.EV_KEY.BTN_STYLUS, 0) in events
+            self._test_states(state_list, scribble, allow_intermediate_states=True)
 
 
 class GXTP_pen(PenDigitizer):
diff --git a/tools/testing/selftests/hid/tests/test_wacom_generic.py b/tools/testing/selftests/hid/tests/test_wacom_generic.py
index f92fe8e02c1bff..352fc39f3c6c16 100644
--- a/tools/testing/selftests/hid/tests/test_wacom_generic.py
+++ b/tools/testing/selftests/hid/tests/test_wacom_generic.py
@@ -27,6 +27,7 @@ from .descriptors_wacom import (
 )
 
 import attr
+from collections import namedtuple
 from enum import Enum
 from hidtools.hut import HUT
 from hidtools.hid import HidUnit
@@ -862,6 +863,8 @@ class TestPTHX60_Pen(TestOpaqueCTLTablet):
 
 
 class TestDTH2452Tablet(test_multitouch.BaseTest.TestMultitouch, TouchTabletTest):
+    ContactIds = namedtuple("ContactIds", "contact_id, tracking_id, slot_num")
+
     def create_device(self):
         return test_multitouch.Digitizer(
             "DTH 2452",
@@ -869,6 +872,57 @@ class TestDTH2452Tablet(test_multitouch.BaseTest.TestMultitouch, TouchTabletTest
             input_info=(0x3, 0x056A, 0x0383),
         )
 
+    def make_contact(self, contact_id=0, t=0):
+        """
+        Make a single touch contact that can move over time.
+
+        Creates a touch object that has a well-known position in space that
+        does not overlap with other contacts. The value of `t` may be
+        incremented over time to move the point along a linear path.
+        """
+        x = 50 + 10 * contact_id + t
+        y = 100 + 100 * contact_id + t
+        return test_multitouch.Touch(contact_id, x, y)
+
+    def make_contacts(self, n, t=0):
+        """
+        Make multiple touch contacts that can move over time.
+
+        Returns a list of `n` touch objects that are positioned at well-known
+        locations. The value of `t` may be incremented over time to move the
+        points along a linear path.
+        """
+        return [ self.make_contact(id, t) for id in range(0, n) ]
+
+    def assert_contact(self, uhdev, evdev, contact_ids, t=0):
+        """
+        Assert properties of a contact generated by make_contact.
+        """
+        contact_id = contact_ids.contact_id
+        tracking_id = contact_ids.tracking_id
+        slot_num = contact_ids.slot_num
+
+        x = 50 + 10 * contact_id + t
+        y = 100 + 100 * contact_id + t
+
+        # If the data isn't supposed to be stored in any slots, there is
+        # nothing we can check for in the evdev stream.
+        if slot_num is None:
+            assert tracking_id == -1
+            return
+
+        assert evdev.slots[slot_num][libevdev.EV_ABS.ABS_MT_TRACKING_ID] == tracking_id
+        if tracking_id != -1:
+            assert evdev.slots[slot_num][libevdev.EV_ABS.ABS_MT_POSITION_X] == x
+            assert evdev.slots[slot_num][libevdev.EV_ABS.ABS_MT_POSITION_Y] == y
+
+    def assert_contacts(self, uhdev, evdev, data, t=0):
+        """
+        Assert properties of a list of contacts generated by make_contacts.
+        """
+        for contact_ids in data:
+            self.assert_contact(uhdev, evdev, contact_ids, t)
+
     def test_contact_id_0(self):
         """
         Bring a finger in contact with the tablet, then hold it down and remove it.
@@ -909,7 +963,7 @@ class TestDTH2452Tablet(test_multitouch.BaseTest.TestMultitouch, TouchTabletTest
         Ensure that the confidence bit being set to false should not result in a touch event.
         """
         uhdev = self.uhdev
-        evdev = uhdev.get_evdev()
+        _evdev = uhdev.get_evdev()
 
         t0 = test_multitouch.Touch(1, 50, 100)
         t0.confidence = False
@@ -917,6 +971,228 @@ class TestDTH2452Tablet(test_multitouch.BaseTest.TestMultitouch, TouchTabletTest
         events = uhdev.next_sync_events()
         self.debug_reports(r, uhdev, events)
 
-        slot = self.get_slot(uhdev, t0, 0)
+        _slot = self.get_slot(uhdev, t0, 0)
+
+        assert not events
+
+    def test_confidence_multitouch(self):
+        """
+        Bring multiple fingers in contact with the tablet, some with the
+        confidence bit set, and some without.
+
+        Ensure that all confident touches are reported and that all non-
+        confident touches are ignored.
+        """
+        uhdev = self.uhdev
+        evdev = uhdev.get_evdev()
+
+        touches = self.make_contacts(5)
+        touches[0].confidence = False
+        touches[2].confidence = False
+        touches[4].confidence = False
+
+        r = uhdev.event(touches)
+        events = uhdev.next_sync_events()
+        self.debug_reports(r, uhdev, events)
+
+        assert libevdev.InputEvent(libevdev.EV_KEY.BTN_TOUCH, 1) in events
+
+        self.assert_contacts(uhdev, evdev,
+            [ self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = None),
+              self.ContactIds(contact_id = 1, tracking_id = 0, slot_num = 0),
+              self.ContactIds(contact_id = 2, tracking_id = -1, slot_num = None),
+              self.ContactIds(contact_id = 3, tracking_id = 1, slot_num = 1),
+              self.ContactIds(contact_id = 4, tracking_id = -1, slot_num = None) ])
+
+    def confidence_change_assert_playback(self, uhdev, evdev, timeline):
+        """
+        Assert proper behavior of contacts that move and change tipswitch /
+        confidence status over time.
+
+        Given a `timeline` list of touch states to iterate over, verify
+        that the contacts move and are reported as up/down as expected
+        by the state of the tipswitch and confidence bits.
+        """
+        t = 0
+
+        for state in timeline:
+            touches = self.make_contacts(len(state), t)
+
+            for item in zip(touches, state):
+                item[0].tipswitch = item[1][1]
+                item[0].confidence = item[1][2]
+
+            r = uhdev.event(touches)
+            events = uhdev.next_sync_events()
+            self.debug_reports(r, uhdev, events)
+
+            ids = [ x[0] for x in state ]
+            self.assert_contacts(uhdev, evdev, ids, t)
+
+            t += 1
+
+    def test_confidence_loss_a(self):
+        """
+        Transition a confident contact to a non-confident contact by
+        first clearing the tipswitch.
+
+        Ensure that the driver reports the transitioned contact as
+        being removed and that other contacts continue to report
+        normally. This mode of confidence loss is used by the
+        DTH-2452.
+        """
+        uhdev = self.uhdev
+        evdev = uhdev.get_evdev()
+
+        self.confidence_change_assert_playback(uhdev, evdev, [
+            # t=0: Contact 0 == Down + confident; Contact 1 == Down + confident
+            # Both fingers confidently in contact
+            [(self.ContactIds(contact_id = 0, tracking_id = 0, slot_num = 0), True, True),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=1: Contact 0 == !Down + confident; Contact 1 == Down + confident
+            # First finger looses confidence and clears only the tipswitch flag
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), False, True),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=2: Contact 0 == !Down + !confident; Contact 1 == Down + confident
+            # First finger has lost confidence and has both flags cleared
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), False, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=3: Contact 0 == !Down + !confident; Contact 1 == Down + confident
+            # First finger has lost confidence and has both flags cleared
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), False, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)]
+        ])
+
+    def test_confidence_loss_b(self):
+        """
+        Transition a confident contact to a non-confident contact by
+        cleraing both tipswitch and confidence bits simultaneously.
+
+        Ensure that the driver reports the transitioned contact as
+        being removed and that other contacts continue to report
+        normally. This mode of confidence loss is used by some
+        AES devices.
+        """
+        uhdev = self.uhdev
+        evdev = uhdev.get_evdev()
+
+        self.confidence_change_assert_playback(uhdev, evdev, [
+            # t=0: Contact 0 == Down + confident; Contact 1 == Down + confident
+            # Both fingers confidently in contact
+            [(self.ContactIds(contact_id = 0, tracking_id = 0, slot_num = 0), True, True),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=1: Contact 0 == !Down + !confident; Contact 1 == Down + confident
+            # First finger looses confidence and has both flags cleared simultaneously
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), False, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=2: Contact 0 == !Down + !confident; Contact 1 == Down + confident
+            # First finger has lost confidence and has both flags cleared
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), False, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=3: Contact 0 == !Down + !confident; Contact 1 == Down + confident
+            # First finger has lost confidence and has both flags cleared
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), False, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)]
+        ])
+
+    def test_confidence_loss_c(self):
+        """
+        Transition a confident contact to a non-confident contact by
+        clearing only the confidence bit.
+
+        Ensure that the driver reports the transitioned contact as
+        being removed and that other contacts continue to report
+        normally.
+        """
+        uhdev = self.uhdev
+        evdev = uhdev.get_evdev()
+
+        self.confidence_change_assert_playback(uhdev, evdev, [
+            # t=0: Contact 0 == Down + confident; Contact 1 == Down + confident
+            # Both fingers confidently in contact
+            [(self.ContactIds(contact_id = 0, tracking_id = 0, slot_num = 0), True, True),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=1: Contact 0 == Down + !confident; Contact 1 == Down + confident
+            # First finger looses confidence and clears only the confidence flag
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), True, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=2: Contact 0 == !Down + !confident; Contact 1 == Down + confident
+            # First finger has lost confidence and has both flags cleared
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), False, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=3: Contact 0 == !Down + !confident; Contact 1 == Down + confident
+            # First finger has lost confidence and has both flags cleared
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), False, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)]
+        ])
+
+    def test_confidence_gain_a(self):
+        """
+        Transition a contact that was always non-confident to confident.
+
+        Ensure that the confident contact is reported normally.
+        """
+        uhdev = self.uhdev
+        evdev = uhdev.get_evdev()
+
+        self.confidence_change_assert_playback(uhdev, evdev, [
+            # t=0: Contact 0 == Down + !confident; Contact 1 == Down + confident
+            # Only second finger is confidently in contact
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = None), True, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 0, slot_num = 0), True, True)],
+
+            # t=1: Contact 0 == Down + !confident; Contact 1 == Down + confident
+            # First finger gains confidence
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = None), True, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 0, slot_num = 0), True, True)],
+
+            # t=2: Contact 0 == Down + confident; Contact 1 == Down + confident
+            # First finger remains confident
+            [(self.ContactIds(contact_id = 0, tracking_id = 1, slot_num = 1), True, True),
+             (self.ContactIds(contact_id = 1, tracking_id = 0, slot_num = 0), True, True)],
+
+            # t=3: Contact 0 == Down + confident; Contact 1 == Down + confident
+            # First finger remains confident
+            [(self.ContactIds(contact_id = 0, tracking_id = 1, slot_num = 1), True, True),
+             (self.ContactIds(contact_id = 1, tracking_id = 0, slot_num = 0), True, True)]
+        ])
+
+    def test_confidence_gain_b(self):
+        """
+        Transition a contact from non-confident to confident.
+
+        Ensure that the confident contact is reported normally.
+        """
+        uhdev = self.uhdev
+        evdev = uhdev.get_evdev()
 
-        assert not events
\ No newline at end of file
+        self.confidence_change_assert_playback(uhdev, evdev, [
+            # t=0: Contact 0 == Down + confident; Contact 1 == Down + confident
+            # First and second finger confidently in contact
+            [(self.ContactIds(contact_id = 0, tracking_id = 0, slot_num = 0), True, True),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=1: Contact 0 == Down + !confident; Contact 1 == Down + confident
+            # Firtst finger looses confidence
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), True, False),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=2: Contact 0 == Down + confident; Contact 1 == Down + confident
+            # First finger gains confidence
+            [(self.ContactIds(contact_id = 0, tracking_id = 2, slot_num = 0), True, True),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)],
+
+            # t=3: Contact 0 == !Down + confident; Contact 1 == Down + confident
+            # First finger goes up
+            [(self.ContactIds(contact_id = 0, tracking_id = -1, slot_num = 0), False, True),
+             (self.ContactIds(contact_id = 1, tracking_id = 1, slot_num = 1), True, True)]
+        ])
diff --git a/tools/testing/selftests/hid/vmtest.sh b/tools/testing/selftests/hid/vmtest.sh
index 4da48bf6b328a2..db534e9099a8a4 100755
--- a/tools/testing/selftests/hid/vmtest.sh
+++ b/tools/testing/selftests/hid/vmtest.sh
@@ -19,12 +19,12 @@ esac
 SCRIPT_DIR="$(dirname $(realpath $0))"
 OUTPUT_DIR="$SCRIPT_DIR/results"
 KCONFIG_REL_PATHS=("${SCRIPT_DIR}/config" "${SCRIPT_DIR}/config.common" "${SCRIPT_DIR}/config.${ARCH}")
-B2C_URL="https://gitlab.freedesktop.org/mupuf/boot2container/-/raw/master/vm2c.py"
+B2C_URL="https://gitlab.freedesktop.org/gfx-ci/boot2container/-/raw/main/vm2c.py"
 NUM_COMPILE_JOBS="$(nproc)"
 LOG_FILE_BASE="$(date +"hid_selftests.%Y-%m-%d_%H-%M-%S")"
 LOG_FILE="${LOG_FILE_BASE}.log"
 EXIT_STATUS_FILE="${LOG_FILE_BASE}.exit_status"
-CONTAINER_IMAGE="registry.freedesktop.org/libevdev/hid-tools/fedora/37:2023-02-17.1"
+CONTAINER_IMAGE="registry.freedesktop.org/bentiss/hid/fedora/39:2023-11-22.1"
 
 TARGETS="${TARGETS:=$(basename ${SCRIPT_DIR})}"
 DEFAULT_COMMAND="pip3 install hid-tools; make -C tools/testing/selftests TARGETS=${TARGETS} run_tests"
@@ -32,7 +32,7 @@ DEFAULT_COMMAND="pip3 install hid-tools; make -C tools/testing/selftests TARGETS
 usage()
 {
 	cat <<EOF
-Usage: $0 [-i] [-s] [-d <output_dir>] -- [<command>]
+Usage: $0 [-j N] [-s] [-b] [-d <output_dir>] -- [<command>]
 
 <command> is the command you would normally run when you are in
 the source kernel direcory. e.g:
@@ -55,6 +55,7 @@ Options:
 
 	-u)		Update the boot2container script to a newer version.
 	-d)		Update the output directory (default: ${OUTPUT_DIR})
+	-b)		Run only the build steps for the kernel and the selftests
 	-j)		Number of jobs for compilation, similar to -j in make
 			(default: ${NUM_COMPILE_JOBS})
 	-s)		Instead of powering off the VM, start an interactive
@@ -191,8 +192,9 @@ main()
 	local command="${DEFAULT_COMMAND}"
 	local update_b2c="no"
 	local debug_shell="no"
+	local build_only="no"
 
-	while getopts ':hsud:j:' opt; do
+	while getopts ':hsud:j:b' opt; do
 		case ${opt} in
 		u)
 			update_b2c="yes"
@@ -207,6 +209,9 @@ main()
 			command="/bin/sh"
 			debug_shell="yes"
 			;;
+		b)
+			build_only="yes"
+			;;
 		h)
 			usage
 			exit 0
@@ -226,8 +231,7 @@ main()
 	shift $((OPTIND -1))
 
 	# trap 'catch "$?"' EXIT
-
-	if [[ "${debug_shell}" == "no" ]]; then
+	if [[ "${build_only}" == "no" && "${debug_shell}" == "no" ]]; then
 		if [[ $# -eq 0 ]]; then
 			echo "No command specified, will run ${DEFAULT_COMMAND} in the vm"
 		else
@@ -267,24 +271,26 @@ main()
 	update_kconfig "${kernel_checkout}" "${kconfig_file}"
 
 	recompile_kernel "${kernel_checkout}" "${make_command}"
+	update_selftests "${kernel_checkout}" "${make_command}"
 
-	if [[ "${update_b2c}" == "no" && ! -f "${b2c}" ]]; then
-		echo "vm2c script not found in ${b2c}"
-		update_b2c="yes"
-	fi
+	if [[ "${build_only}" == "no" ]]; then
+		if [[ "${update_b2c}" == "no" && ! -f "${b2c}" ]]; then
+			echo "vm2c script not found in ${b2c}"
+			update_b2c="yes"
+		fi
 
-	if [[ "${update_b2c}" == "yes" ]]; then
-		download $B2C_URL $b2c
-		chmod +x $b2c
-	fi
+		if [[ "${update_b2c}" == "yes" ]]; then
+			download $B2C_URL $b2c
+			chmod +x $b2c
+		fi
 
-	update_selftests "${kernel_checkout}" "${make_command}"
-	run_vm "${kernel_checkout}" $b2c "${kernel_bzimage}" "${command}"
-	if [[ "${debug_shell}" != "yes" ]]; then
-		echo "Logs saved in ${OUTPUT_DIR}/${LOG_FILE}"
-	fi
+		run_vm "${kernel_checkout}" $b2c "${kernel_bzimage}" "${command}"
+		if [[ "${debug_shell}" != "yes" ]]; then
+			echo "Logs saved in ${OUTPUT_DIR}/${LOG_FILE}"
+		fi
 
-	exit $(cat ${OUTPUT_DIR}/${EXIT_STATUS_FILE})
+		exit $(cat ${OUTPUT_DIR}/${EXIT_STATUS_FILE})
+	fi
 }
 
 main "$@"