diff options
Diffstat (limited to 'drivers/mmc/core/core.c')
| -rw-r--r-- | drivers/mmc/core/core.c | 52 |
1 files changed, 36 insertions, 16 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index acbc3f2aaaf9e3..7dc0c85fdb6067 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -800,6 +800,10 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) data->timeout_ns = limit_us * 1000; data->timeout_clks = 0; } + + /* assign limit value if invalid */ + if (timeout_us == 0) + data->timeout_ns = limit_us * 1000; } /* @@ -1310,31 +1314,38 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, } EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr); +#endif /* CONFIG_REGULATOR */ + int mmc_regulator_get_supply(struct mmc_host *mmc) { struct device *dev = mmc_dev(mmc); - struct regulator *supply; int ret; - supply = devm_regulator_get(dev, "vmmc"); - mmc->supply.vmmc = supply; + mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc"); mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc"); - if (IS_ERR(supply)) - return PTR_ERR(supply); + if (IS_ERR(mmc->supply.vmmc)) { + if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No vmmc regulator found\n"); + } else { + ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc); + if (ret > 0) + mmc->ocr_avail = ret; + else + dev_warn(dev, "Failed getting OCR mask: %d\n", ret); + } - ret = mmc_regulator_get_ocrmask(supply); - if (ret > 0) - mmc->ocr_avail = ret; - else - dev_warn(mmc_dev(mmc), "Failed getting OCR mask: %d\n", ret); + if (IS_ERR(mmc->supply.vqmmc)) { + if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No vqmmc regulator found\n"); + } return 0; } EXPORT_SYMBOL_GPL(mmc_regulator_get_supply); -#endif /* CONFIG_REGULATOR */ - /* * Mask off any voltages we don't support and select * the lowest voltage @@ -1533,8 +1544,13 @@ void mmc_power_up(struct mmc_host *host, u32 ocr) host->ios.timing = MMC_TIMING_LEGACY; mmc_set_ios(host); - /* Set signal voltage to 3.3V */ - __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330); + /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */ + if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n"); + else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n"); + else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0) + dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n"); /* * This delay should be sufficient to allow the power supply @@ -2183,7 +2199,7 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen) { struct mmc_command cmd = {0}; - if (mmc_card_blockaddr(card) || mmc_card_ddr_mode(card)) + if (mmc_card_blockaddr(card) || mmc_card_ddr52(card)) return 0; cmd.opcode = MMC_SET_BLOCKLEN; @@ -2263,7 +2279,6 @@ static int mmc_do_hw_reset(struct mmc_host *host, int check) } } - host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_DDR); if (mmc_host_is_spi(host)) { host->ios.chip_select = MMC_CS_HIGH; host->ios.bus_mode = MMC_BUSMODE_PUSHPULL; @@ -2403,6 +2418,11 @@ void mmc_rescan(struct work_struct *work) container_of(work, struct mmc_host, detect.work); int i; + if (host->trigger_card_event && host->ops->card_event) { + host->ops->card_event(host); + host->trigger_card_event = false; + } + if (host->rescan_disable) return; |