| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These are ACPICA updates coming from the 20240322 release upstream, an
ACPI DPTF driver update adding new platform support for it, some new
quirks and some assorted fixes and cleanups.
Specifics:
- Add EINJ CXL error types to actbl1.h (Ben Cheatham)
- Add support for RAS2 table to ACPICA (Shiju Jose)
- Fix various spelling mistakes in text files and code comments in
ACPICA (Colin Ian King)
- Fix spelling and typos in ACPICA (Saket Dumbre)
- Modify ACPI_OBJECT_COMMON_HEADER (lijun)
- Add RISC-V RINTC affinity structure support to ACPICA (Haibo Xu)
- Fix CXL 3.0 structure (RDPAS) in the CEDT table (Hojin Nam)
- Add missin increment of registered GPE count to ACPICA (Daniil
Tatianin)
- Mark new ACPICA release 20240322 (Saket Dumbre)
- Add support for the AEST V2 table to ACPICA (Ruidong Tian)
- Disable -Wstringop-truncation for some ACPICA code in the kernel to
avoid a compiler warning that is not very useful (Arnd Bergmann)
- Make the kernel indicate support for several ACPI features that are
in fact supported to the platform firmware through _OSC and fix the
Generic Initiator Affinity _OSC bit (Armin Wolf)
- Make the ACPI core set the owner value for ACPI drivers, drop the
owner setting from a number of drivers and eliminate the owner
field from struct acpi_driver (Krzysztof Kozlowski)
- Rearrange fields in several structures to effectively eliminate
computations from container_of() in some cases (Andy Shevchenko)
- Do some assorted cleanups of the ACPI device enumeration code (Andy
Shevchenko)
- Make the ACPI device enumeration code skip devices with _STA values
clearly identified by the specification as invalid (Rafael Wysocki)
- Rework the handling of the NHLT table to simplify and clarify it
and drop some obsolete pieces (Cezary Rojewski)
- Add ACPI IRQ override quirks for Asus Vivobook Pro N6506MV,
TongFang GXxHRXx and GMxHGxx, and XMG APEX 17 M23 (Guenter
Schafranek, Tamim Khan, Christoffer Sandberg)
- Add reference to UEFI DSD Guide to the documentation related to the
ACPI handling of device properties (Sakari Ailus)
- Fix SRAT lookup of CFMWS ranges with numa_fill_memblks(), remove
lefover architecture-dependent code from the ACPI NUMA handling
code and simplify it on top of that (Robert Richter)
- Add a num-cs device property to specify the number of chip selects
for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a
nested CONFIG_PM #ifdef from it (Andy Shevchenko)
- Move three x86-specific ACPI files to the x86 directory (Andy
Shevchenko)
- Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a
PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede)
- Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy
Sathyanarayanan)
- Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar)
- Mark the einj_driver driver's remove callback as __exit because it
cannot get unbound via sysfs (Uwe Kleine-König)
- Fix a typo in the ACPI documentation regarding the layout of sysfs
subdirectory representing the ACPI namespace (John Watts)
- Make the ACPI pfrut utility print the update_cap field during
capability query (Chen Yu)
- Add HAS_IOPORT dependencies to PNP (Niklas Schnelle)"
* tag 'acpi-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity()
ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit()
ACPI/NUMA: Remove architecture dependent remainings
x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
ACPI: video: Add backlight=native quirk for Lenovo Slim 7 16ARH7
ACPI: scan: Avoid enumerating devices with clearly invalid _STA values
ACPI: Move acpi_blacklisted() declaration to asm/acpi.h
ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MV
ACPICA: AEST: Add support for the AEST V2 table
ACPI: tools: pfrut: Print the update_cap field during capability query
ACPI: property: Add reference to UEFI DSD Guide
Documentation: firmware-guide: ACPI: Fix namespace typo
PNP: add HAS_IOPORT dependencies
ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxx
ACPI: resource: Do IRQ override on GMxBGxx (XMG APEX 17 M23)
ACPICA: Update acpixf.h for new ACPICA release 20240322
ACPICA: events/evgpeinit: don't forget to increment registered GPE count
ACPICA: Fix CXL 3.0 structure (RDPAS) in the CEDT table
ACPICA: SRAT: Add dump and compiler support for RINTC affinity structure
ACPICA: SRAT: Add RISC-V RINTC affinity structure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly cpufreq updates, including a significant intel-pstate
driver update and several amd-pstate improvements plus some updates of
ARM cpufreq drivers, general fixes and cleanups.
Also included are changes related to system sleep, power capping
updates adding support for a new platform and a new hardware feature
(among other things), a Samsung exynos-asv driver update allowing it
to change its Energy Model after adjusting voltage, minor cpuidle and
devfreq updates and a small documentation cleanup.
Specifics:
- Rework the handling of disabled turbo in the intel_pstate driver
and make it update the maximum CPU frequency consistently
regardless of the reason on top of a number of cleanups (Rafael
Wysocki)
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar)
- Prevent pulicy->max from going above the frequency QoS maximum
value when cpufreq_frequency_table_verify() is used (Xuewen Yan)
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong)
- Update MAINTAINERS entry for amd-pstate to add two new
submaintainers and a designated reviewer (Huang Rui)
- Clean up the amd-pstate driver and update its documentation
(Gautham Shenoy)
- Fix the highest frequency issue in the amd-pstate driver which
limits performance (Perry Yuan)
- Enable CPPC v2 for certain processors in the family 17H, as
requested by TR40 processor users who expect improved performance
and lower system temperature (Perry Yuan)
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan)
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have
CPPC v2 capability (Perry Yuan)
- Sun50i cpufreq: Add support for opp_supported_hw, H616 platform and
general cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi,
Dan Carpenter, Viresh Kumar)
- CPPC cpufreq: Fix possible null pointer dereference (Aleksandr
Mishin)
- Eliminate uses of of_node_put() from cpufreq (Javier Carrasco,
Shivani Gupta)
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens)
- mediatek cpufreq: Add support for MT7988A (Sam Shih)
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei
Fan)
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate
cpufreq driver (Jeff Johnson)
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson)
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li)
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt)
- Use %ps to simplify debug output in the core system-wide suspend
and resume code (Len Brown)
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole)
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui)
- Add support for ArrowLake-H platform to the Intel RAPL driver
(Zhang Rui)
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li)
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba)
- Remove a reference to a function that has been dropped from the
power management documentation (Bjorn Helgaas)
- Convert the platfrom remove callback to .remove_new for the
exyno-nocp, exynos-ppmu, mtk-cci-devfreq, sun8i-a33-mbus, and
rk3399_dmc devfreq drivers (Uwe Kleine-König)
- Use DEFINE_SIMPLE_PM_OPS for exyno-bus.c driver (Anand Moon)"
* tag 'pm-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (68 commits)
PM / devfreq: exynos: Use DEFINE_SIMPLE_DEV_PM_OPS for PM functions
PM / devfreq: rk3399_dmc: Convert to platform remove callback returning void
PM / devfreq: sun8i-a33-mbus: Convert to platform remove callback returning void
PM / devfreq: mtk-cci: Convert to platform remove callback returning void
PM / devfreq: exynos-ppmu: Convert to platform remove callback returning void
PM / devfreq: exynos-nocp: Convert to platform remove callback returning void
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpuidle: ladder: fix ladder_do_selection() kernel-doc
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
PM: hibernate: replace deprecated strncpy() with strscpy()
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The most significant part of this is a rework of thermal governors,
including a redesign of the thermal governor interface and changes to
make some of them take trip point hysteresis into account properly, as
well as some related cleanups of the thermal governors and thermal
core.
The above is based on preliminary changes refactoring thermal data
structures and moving the definitions of some of them into the thermal
core which also ensure that trip point crossing notifications will be
sent to user space via netlink and recorded in the debug statistics in
temperature order.
In addition, netlink bind/unbind notifications are added to the
thermal core and the Intel HFI driver is modified to use them to avoid
sending netlink messages until there are subscribers.
Apart from that, multiple thermal drivers are updated which includes
new hardware support (MediaTek MT8188 and MT8186, Amlogic A1 thermal
sensor, Loongson-2K2000, Lmh QCM2290), fixes, cleanups and
documentation updates, and the recently added thermal debug code is
fixed and cleaned up.
Specifics:
- Redesign the thermal governor interface to allow the governors to
work in a more straightforward way (Rafael Wysocki)
- Make thermal governors take the current trip point thresholds into
account in their computations which allows trip hysteresis to be
observed more accurately (Rafael Wysocki)
- Make the thermal core manage passive polling for thermal zones and
remove passive polling management from thermal governors (Rafael
Wysocki)
- Refactor trip point representation and move the definition of
thermal governor and thermal zone device structures to the thermal
core (Rafael Wysocki)
- Sort trip point crossing notifications and debug recording of trip
point crossing events by temperature (Rafael Wysocki)
- Improve the handling of cooling device states and thermal
mitigation episodes in progress in the thermal debug code (Rafael
Wysocki)
- Avoid excessive updates of trip point statistics and clean up the
printing of thermal mitigation episode information (Rafael Wysocki)
- Clean up thermal governors and thermal core (Rafael Wysocki)
- Allow thermal drivers to register notifiers that will be invoked on
netlink events like BIND and UNBIND, so that they can adjust their
activity depending on whether or not there are any subscribers of
netlink messages coming from them, and make the Intel HFI driver
use this mechanism (Stanislaw Gruszka)
- Adjust the update delay and capabilities-per-event values in the
Intel HFI thermal driver to prevent it from missing events and
allow it to process more data in one go (Ricardo Neri)
- Add missing MODULE_DESCRIPTION() to multiple files in the
int340x_thermal and intel_soc_dts_iosf drivers (Srinivas
Pandruvada)
- Replace deprecated strncpy() with strscpy() in the int340x_thermal
driver (Justin Stitt)
- Add QCM2290 compatible DT bindings for Lmh and fix a NULL pointer
dereference in the lmh driver when the SCM is not present (Konrad
Dybcio)
- Use the strreplace() function instead of doing it manually in the
Armada driver (Rasmus Villemoes)
- Convert st,stih407-thermal to DT schema and fix up missing
properties (Raphael Gallais-Pou)
- Add suspend/resume by restoring the context of the tsens sensor
(Priyansh Jain)
- Support A1 SoC family Thermal Sensor controller and add the DT
bindings (Dmitry Rokosov)
- Improve the temperature approximation calculation and consolidate
the Tj constant into a shared area of the structure instead of
duplicating it on the Rcar Gen3 (Niklas Söderlund)
- Fix the Mediatek LVTS sensor coefficient for the MT8192 in order to
support it correctly (Hsin-Te Yuan)
- Fix a NULL pointer dereference in the tsens driver when the
function compute_intercept_slope() is called with a NULL parameter
(Aleksandr Mishin)
- Remove some unused fields in struct qpnp_tm_chip and k3_bandgap
(Christophe Jaillet)
- Fix up calibration efuse data decoding, consolidate the code by
checking boundaries and refactor some part of the LVTS Mediatek
driver. After setting the scene, add MT8186 and MT8188 along with
the DT bindings (Nicolas Pitre)
- Add Loongson-2K2000 support after some minor code adjustements and
providing the DT bindings definition (Binbin Zhou)"
* tag 'thermal-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
thermal: intel: hfi: Increase the number of CPU capabilities per netlink event
thermal: intel: hfi: Rename HFI_MAX_THERM_NOTIFY_COUNT
thermal: intel: hfi: Shorten the thermal netlink event delay to 100ms
thermal: intel: hfi: Rename HFI_UPDATE_INTERVAL
thermal: intel: Add missing module description
thermal: core: Move passive polling management to the core
thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid
thermal: trip: Add missing empty code line
thermal/debugfs: Avoid printing zero duration for mitigation events in progress
thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()
thermal/debugfs: Create records for cdev states as they get used
thermal: core: Introduce thermal_governor_trip_crossed()
thermal/debugfs: Make tze_seq_show() skip invalid trips and trips with no stats
thermal/debugfs: Rename thermal_debug_update_temp() to thermal_debug_update_trip_stats()
thermal/debugfs: Clean up thermal_debug_update_temp()
thermal/debugfs: Avoid excessive updates of trip point statistics
thermal: core: Relocate critical and hot trip handling
thermal: core: Drop the .throttle() governor callback
thermal: gov_user_space: Use .trip_crossed() instead of .throttle()
thermal: gov_fair_share: Eliminate unnecessary integer divisions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- make framework and tests reporting KTAP compliant
- make ktap_helpers and power_supply test POSIX compliant
- add ksft_exit_fail_perror() to include errono in string form
- avoid clang reporting false positive static analysis errors about
functions that exit and never return. ksft_exit* functions are marked
__noreturn to address this problem
- add mechanism for reporting a KSFT_ result code
- fix build warnings related missing headers and unused variables
- fix clang build failures
- cleanups to resctrl test
- add host arch for LLVM builds
* tag 'linux_kselftest-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (44 commits)
selftests/sgx: Include KHDR_INCLUDES in Makefile
selftests: Compile kselftest headers with -D_GNU_SOURCE
selftests/resctrl: fix clang build warnings related to abs(), labs() calls
selftests/ftrace: Fix checkbashisms errors
selftests/ftrace: Fix BTFARG testcase to check fprobe is enabled correctly
selftests/capabilities: fix warn_unused_result build warnings
selftests: filesystems: add missing stddef header
selftests: kselftest_deps: fix l5_test() empty variable
selftests: default to host arch for LLVM builds
selftests/resctrl: fix clang build failure: use LOCAL_HDRS
selftests/binderfs: use the Makefile's rules, not Make's implicit rules
Documentation: kselftest: fix codeblock
selftests: kselftest: Make ksft_exit functions return void instead of int
selftests: x86: ksft_exit_pass() does not return
selftests: timers: ksft_exit functions do not return
selftests: sync: ksft_exit_pass() does not return
selftests/resctrl: ksft_exit_skip() does not return
selftests: pidfd: ksft_exit functions do not return
selftests/mm: ksft_exit functions do not return
selftests: membarrier: ksft_exit_pass() does not return
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- fix race condition in try-catch completion
- change __kunit_test_suites_init() to exit early if there is
nothing to test
- change string-stream-test to use KUNIT_DEFINE_ACTION_WRAPPER
- move fault tests behind KUNIT_FAULT_TEST Kconfig option
- kthread test fixes and improvements
- iov_iter test fixes
* tag 'linux_kselftest-kunit-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: bail out early in __kunit_test_suites_init() if there are no suites to test
kunit: string-stream-test: use KUNIT_DEFINE_ACTION_WRAPPER
kunit: test: Move fault tests behind KUNIT_FAULT_TEST Kconfig option
kunit: unregister the device on error
kunit: Fix race condition in try-catch completion
kunit: Add tests for fault
kunit: Print last test location on fault
kunit: Fix KUNIT_SUCCESS() calls in iov_iter tests
kunit: Handle test faults
kunit: Fix timeout message
kunit: Fix kthread reference
kunit: Handle thread creation error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
- add support for uname(2)
- remove open-coded strnlen()
- export strlen()
- add tests for strlcat() and strlcpy()
- fix memory error in realloc()
- fix strlcat() and strlcpy() return code and size usage
* tag 'linux_kselftest-nolibc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tools/nolibc: add support for uname(2)
tools/nolibc/string: remove open-coded strnlen()
selftests/nolibc: Add tests for strlcat() and strlcpy()
tools/nolibc: Fix strlcpy() return code and size usage
tools/nolibc: Fix strlcat() return code and size usage
tools/nolibc/string: export strlen()
tools/nolibc/stdlib: fix memory error in realloc()
|
|
Pull OpenRISC updates from Stafford Horne:
"A few cleanups and fixups from me:
- Add a few missing relocations to fix module loading
- Cleanup FPU state save and restore to be more efficient
- Cleanups to traps handling and logging
- Fix issue with poweroff being broken after recent power driver
refactorings"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Move FPU state out of pt_regs
openrisc: Add FPU config
openrisc: traps: Don't send signals to kernel mode threads
openrisc: traps: Remove calls to show_registers before die
openrisc: traps: Convert printks to pr_<level> macros
openrisc: Add support for more module relocations
openrisc: Define openrisc relocation types
openrisc: Use do_kernel_power_off()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"The majority of improvements are coming from Geert Uytterhoeven who
took the time to fix a total of 30 cases of "-Wmissing-prototypes"
compiler warnings, either by adding a missing header include, defining
the missing forward declarations or making the functions in question
static.
In the case of several DMA functions, the fix was to actually just
remove them as they were added but never used. Another one of these
warnings was eliminated by removing the left-over sh5 cache handling
support, a change that was suggested by Yoshinori Sato and, finally,
the last of these warnings was fixed by guarding the function
setup_profiling_timer() with CONFIG_PROFILING.
While at it, Geert also removed two unneeded casts to kprobe_opcode_t
in the kprobes code.
Another change was contributed by Guenter Roeck to fix errors that
were reported during checksum unit tests. The fix actually reverts the
older change cadc4e1a2b4d ("sh: Handle calling csum_partial with
misaligned data") which turned to be incorrect. It remains to be
investigated whether there is a better way to handle misaligned data
in csum_partial().
A small fix contributed by Krzysztof Kozlowski drops the incorrect SPI
controller spi-max-frequency property in the device tree source file
for the J2 device platform while Uwe Kleine-König converted the
push-switch driver to have its callback function return void, a change
that is currently being applied to all drivers throughout the kernel
in order to avoid resource leaks.
Last but not least, Artur Rojek has fixed the IOPORT base address for
the Sega Dreamcast platform which allows the Linux kernel to be
successfully booted on this once popular video game console for the
first time since a long time ago"
* tag 'sh-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: (35 commits)
sh: setup: Add missing forward declaration for sh_fdt_init()
sh: smp: Protect setup_profiling_timer() by CONFIG_PROFILING
sh: of-generic: Add missing #include <asm/clock.h>
sh: dreamcast: Fix GAPS PCI bridge addressing
sh: boot: Add proper forward declarations
sh: boot: Remove sh5 cache handling
Revert "sh: Handle calling csum_partial with misaligned data"
sh: j2: Drop incorrect SPI controller spi-max-frequency property
sh: push-switch: Convert to platform remove callback returning void
sh: sh7785lcr: Make init_sh7785lcr_IRQ() static
sh: sh7757: Add missing #include <asm/mmzone.h>
sh: sh7757lcr: Make init_sh7757lcr_IRQ() static
sh: mach-sh03: Make sh03_rtc_settimeofday() static
sh: mach-highlander: Add missing #include <mach/highlander.h>
sh: traps: Make is_dsp_inst() static
sh: cache: Move forward declarations to <asm/cacheflush.h>
sh: dma: Remove unused functionality
sh: dwarf: Make dwarf_lookup_fde() static
sh: kprobes: Remove unneeded kprobe_opcode_t casts
sh: kprobes: Make trampoline_probe_handler() static
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The most interesting parts are probably the mm changes from Ryan which
optimise the creation of the linear mapping at boot and (separately)
implement write-protect support for userfaultfd.
Outside of our usual directories, the Kbuild-related changes under
scripts/ have been acked by Masahiro whilst the drivers/acpi/ parts
have been acked by Rafael and the addition of cpumask_any_and_but()
has been acked by Yury.
ACPI:
- Support for the Firmware ACPI Control Structure (FACS) signature
feature which is used to reboot out of hibernation on some systems
Kbuild:
- Support for building Flat Image Tree (FIT) images, where the kernel
Image is compressed alongside a set of devicetree blobs
Memory management:
- Optimisation of our early page-table manipulation for creation of
the linear mapping
- Support for userfaultfd write protection, which brings along some
nice cleanups to our handling of invalid but present ptes
- Extend our use of range TLBI invalidation at EL1
Perf and PMUs:
- Ensure that the 'pmu->parent' pointer is correctly initialised by
PMU drivers
- Avoid allocating 'cpumask_t' types on the stack in some PMU drivers
- Fix parsing of the CPU PMU "version" field in assembly code, as it
doesn't follow the usual architectural rules
- Add best-effort unwinding support for USER_STACKTRACE
- Minor driver fixes and cleanups
Selftests:
- Minor cleanups to the arm64 selftests (missing NULL check, unused
variable)
Miscellaneous:
- Add a command-line alias for disabling 32-bit application support
- Add part number for Neoverse-V2 CPUs
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
arm64/mm: Fix pud_user_accessible_page() for PGTABLE_LEVELS <= 2
arm64/mm: Add uffd write-protect support
arm64/mm: Move PTE_PRESENT_INVALID to overlay PTE_NG
arm64/mm: Remove PTE_PROT_NONE bit
arm64/mm: generalize PMD_PRESENT_INVALID for all levels
arm64: simplify arch_static_branch/_jump function
arm64: Add USER_STACKTRACE support
arm64: Add the arm64.no32bit_el0 command line option
drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset()
drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group
drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group
kselftest: arm64: Add a null pointer check
arm64: defer clearing DAIF.D
arm64: assembler: update stale comment for disable_step_tsk
arm64/sysreg: Update PIE permission encodings
kselftest/arm64: Remove unused parameters in abi test
perf/arm-spe: Assign parents for event_source device
perf/arm-smmuv3: Assign parents for event_source device
perf/arm-dsu: Assign parents for event_source device
perf/arm-dmc620: Assign parents for event_source device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Fix invalid context sleep and reboot hang on Mac
- Fix spinlock race in kernel thread creation
- Miscellaneous fixes and improvements
- defconfig updates
* tag 'm68k-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.9-rc1
m68k: Move ARCH_HAS_CPU_CACHE_ALIASING
m68k: mac: Fix reboot hang on Mac IIci
m68k: Fix spinlock race in kernel thread creation
m68k: Let GENERIC_IOMAP depend on HAS_IOPORT
m68k: amiga: Use str_plural() to fix Coccinelle warning
macintosh/via-macii: Fix "BUG: sleeping function called from invalid context"
zorro: Use helpers from ioport.h
m68k: Calculate THREAD_SIZE from THREAD_SIZE_ORDER
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 interrupt handling updates from Thomas Gleixner:
"Add support for posted interrupts on bare metal.
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the
corresponding device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter"
* tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Use existing helper for pending vector check
iommu/vt-d: Enable posted mode for device MSIs
iommu/vt-d: Make posted MSI an opt-in command line option
x86/irq: Extend checks for pending vectors to posted interrupts
x86/irq: Factor out common code for checking pending interrupts
x86/irq: Install posted MSI notification handler
x86/irq: Factor out handler invocation from common_interrupt()
x86/irq: Set up per host CPU posted interrupt descriptors
x86/irq: Reserve a per CPU IDT vector for posted MSIs
x86/irq: Add a Kconfig option for posted MSI
x86/irq: Remove bitfields in posted interrupt descriptor
x86/irq: Unionize PID.PIR for 64bit access w/o casting
KVM: VMX: Move posted interrupt descriptor out of VMX code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU
- The usual small cleanups
Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place"
* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timers update from Thomas Gleixner:
"A single update for the TSC synchronixation sanity checks:
The sad state of TSC being notoriously non-sychronized for several
decades caused the kernel to grow quite rigorous sanity checks to
detect whether the TSC is valid to be used for timekeeping.
The TSC ADJUST MSR provides the offset between the initial TSC value
after hardware reset and later modifications. This allows to detect
cases where firmware tampers with the TSC and also allows to correct
the firmware induced damage by resetting the offset in a controlled
way.
The universal correct rule is that the TSC ADJUST value has to be
consistent within all CPUs of a socket.
The kernel further assumes that the TSC offset should be consistent
between sockets. That's not really correct as systems with a huge
number of sockets are not architecurally guaranteed to reset the per
socket TSC base synchronously.
In case that the per socket offset is not consistent the kernel resets
it to the offset of the boot CPU and then does a synchronization check
which corrects for the inter socket delays.
That works most of the time, but it is suboptimal as the firmware has
eventually better information about the per socket offset and on sane
systems that offset should just work in the validation checks"
* tag 'x86-timers-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsc: Trust initial offset in architectural TSC-adjust MSRs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timers and timekeeping updates from Thomas Gleixner:
"Core code:
- Make timekeeping and VDSO time readouts resilent against math
overflow:
In guest context the kernel is prone to math overflow when the host
defers the timer interrupt due to overload, malfunction or malice.
This can be mitigated by checking the clocksource delta for the
maximum deferrement which is readily available. If that value is
exceeded then the code uses a slowpath function which can handle
the multiplication overflow.
This functionality is enabled unconditionally in the kernel, but
made conditional in the VDSO code. The latter is conditional
because it allows architectures to optimize the check so it is not
causing performance regressions.
On X86 this is achieved by reworking the existing check for
negative TSC deltas as a negative delta obviously exceeds the
maximum deferrement when it is evaluated as an unsigned value. That
avoids two conditionals in the hotpath and allows to hide both the
negative delta and the large delta handling in the same slow path.
- Add an initial minimal ktime_t abstraction for Rust
- The usual boring cleanups and enhancements
Drivers:
- Boring updates to device trees and trivial enhancements in various
drivers"
* tag 'timers-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
clocksource/drivers/arm_arch_timer: Mark hisi_161010101_oem_info const
clocksource/drivers/timer-ti-dm: Remove an unused field in struct dmtimer
clocksource/drivers/renesas-ostm: Avoid reprobe after successful early probe
clocksource/drivers/renesas-ostm: Allow OSTM driver to reprobe for RZ/V2H(P) SoC
dt-bindings: timer: renesas: ostm: Document Renesas RZ/V2H(P) SoC
rust: time: doc: Add missing C header links
clocksource: Make the int help prompt unit readable in ncurses
hrtimer: Rename __hrtimer_hres_active() to hrtimer_hres_active()
timerqueue: Remove never used function timerqueue_node_expires()
rust: time: Add Ktime
vdso: Fix powerpc build U64_MAX undeclared error
clockevents: Convert s[n]printf() to sysfs_emit()
clocksource: Convert s[n]printf() to sysfs_emit()
clocksource: Make watchdog and suspend-timing multiplication overflow safe
timekeeping: Let timekeeping_cycles_to_ns() handle both under and overflow
timekeeping: Make delta calculation overflow safe
timekeeping: Prepare timekeeping_cycles_to_ns() for overflow safety
timekeeping: Fold in timekeeping_delta_to_ns()
timekeeping: Consolidate timekeeping helpers
timekeeping: Refactor timekeeping helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 APIC update from Dave Hansen:
"Coccinelle complained about some 64-bit divisions, but the divisor was
really just a 32-bit value being stored as 'unsigned long'.
Fixing the types fixes the warning"
* tag 'x86_apic_for_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Improve data types to fix Coccinelle warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Small cleanups and improvements
* tag 'x86_sev_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Make the VMPL0 checking more straight forward
x86/sev: Rename snp_init() in boot/compressed/sev.c
x86/sev: Shorten struct name snp_secrets_page_layout to snp_secrets_page
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loader updates from Borislav Petkov:
- Fix a clang-15 build warning and other cleanups
* tag 'x86_microcode_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove unused struct cpu_info_ctx
x86/microcode/AMD: Remove unused PATCH_MAX_SIZE macro
x86/microcode/AMD: Avoid -Wformat warning with clang-15
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add a tracepoint to read out LLC occupancy of resource monitor IDs
with the goal of freeing them sooner rather than later
- Other code improvements and cleanups
* tag 'x86_cache_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Add tracepoint for llc_occupancy tracking
x86/resctrl: Rename pseudo_lock_event.h to trace.h
x86/resctrl: Simplify call convention for MSR update functions
x86/resctrl: Pass domain to target CPU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm alternatives updates from Borislav Petkov:
- Switch the in-place instruction patching which lead to at least one
weird bug with 32-bit guests, seeing stale instruction bytes, to one
working on a buffer, like the rest of the alternatives code does
- Add a long overdue check to the X86_FEATURE flag modifying functions
to warn when former get changed in a non-compatible way after
alternatives have been patched because those changes will be already
wrong
- Other cleanups
* tag 'x86_alternatives_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Remove alternative_input_2()
x86/alternatives: Sort local vars in apply_alternatives()
x86/alternatives: Optimize optimize_nops()
x86/alternatives: Get rid of __optimize_nops()
x86/alternatives: Use a temporary buffer when optimizing NOPs
x86/alternatives: Catch late X86_FEATURE modifiers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS update from Borislav Petkov:
- Change the fixed-size buffer for MCE records to a dynamically sized
one based on the number of CPUs present in the system
* tag 'ras_core_for_v6.10_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Dynamically size space for machine check records
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Have skx_edac decode error addresses belonging to SGX properly
- Remove a bunch of unused struct members
- Other cleanups
* tag 'edac_updates_for_v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/skx_common: Allow decoding of SGX addresses
EDAC/mc_sysfs: Convert sprintf()/snprintf() to sysfs_emit()
EDAC: Remove unused struct members
EDAC: Remove dynamic attributes from edac_device_alloc_ctl_info()
EDAC/device: Remove edac_dev_sysfs_block_attribute::store()
EDAC/device: Remove edac_dev_sysfs_block_attribute::{block,value}
EDAC/amd64: Remove unused struct member amd64_pvt::ext_nbcfg
|
|
Pull DSA and IAA accelerator mis-alignment fix from Arjan van de Ven:
"The DSA (memory copy/zero/etc) and IAA (compression) accelerators in
the Sapphire Rapids and Emerald Rapids SOCs turn out to have a bug
that has security implications.
Both of these accelerators work by the application submitting a 64
byte command to the device; this command contains an opcode as well as
the virtual address of the return value that the device will update on
completion... and a set of opcode specific values.
In a typical scenario a ring 3 application mmaps the device file and
uses the ENQCMD or MOVDIR64 instructions (which are variations of a 64
byte atomic write) on this mmap'd memory region to directly submit
commands to a device hardware.
The return value as specified in the command, is supposed to be 32 (or
64) bytes aligned in memory, and generally the hardware checks and
enforces this alignment.
However in testing it has been found that there are conditions
(controlled by the submitter) where this enforcement does not
happen... which makes it possible for the return value to span a page
boundary. And this is where it goes wrong - the accelerators will
perform the virtual to physical address lookup on the first of the two
pages, but end up continue writing to the next consecutive physical
(host) page rather than the consecutive virtual page. In addition, the
device will end up in a hung state on such unaligned write of the
return value.
This patch series has the proposed software side solution consisting
of three parts:
- Don't allow these two PCI devices to be assigned to VM guests (we
cannot trust a VM guest to behave correctly and not cause this
condition)
- Don't allow ring 3 applications to set up the mmap unless they have
CAP_SYS_RAWIO permissions. This makes it no longer possible for
non-root applications to directly submit commands to the
accelerator
- Add a write() method to the device so that an application can
submit its commands to the kernel driver, which performs the needed
sanity checks before submitting it to the hardware.
This switch from mmap to write is an incompatible interface change to
non-root userspace, but we have not found a way to avoid this. All
software we know of uses a small set of accessor libraries for these
accelerators, for which libqpl and libdml (on github) are the most
common. As part of the security release, updated versions of these
libraries will be released that transparently fall back to write().
Intel has assigned CVE-2024-21823 to this hardware issue"
* tag 'idxd-for-linus-may2024' of git bundle from Arjan:
dmaengine: idxd: add a write() method for applications to submit work
dmaengine: idxd: add a new security check to deal with a hardware erratum
VFIO: Add the SPR_DSA and SPR_IAX devices to the denylist
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 shadow stacks from Ingo Molnar:
"Enable shadow stacks for x32.
While we normally don't do such feature-enabling for 32-bit anymore,
this change is small, straightforward & tested on upstream glibc"
* tag 'x86-shstk-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/shstk: Enable shadow stacks for x32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
- Improve the DeviceTree (OF) NUMA enumeration code to address
kernel warnings & mis-mappings on DeviceTree platforms
- Migrate x86 platform drivers to the .remove_new callback API
- Misc cleanups & fixes
* tag 'x86-platform-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/olpc-xo1-sci: Convert to platform remove callback returning void
x86/platform/olpc-x01-pm: Convert to platform remove callback returning void
x86/platform/iris: Convert to platform remove callback returning void
x86/of: Change x86_dtb_parse_smp_config() to static
x86/of: Map NUMA node to CPUs as per DeviceTree
x86/of: Set the parse_smp_cfg for all the DeviceTree platforms by default
x86/hyperv/vtl: Correct x86_init.mpparse.parse_smp_cfg assignment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 percpu updates from Ingo Molnar:
- Expand the named address spaces optimizations down to
GCC 9.1+.
- Re-enable named address spaces with sanitizers for GCC 13.3+
- Generate better this_percpu_xchg_op() code
- Introduce raw_cpu_read_long() to reduce ifdeffery
- Simplify the x86_this_cpu_test_bit() et al macros
- Address Sparse warnings
- Misc cleanups & fixes
* tag 'x86-percpu-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/percpu: Introduce raw_cpu_read_long() to reduce ifdeffery
x86/percpu: Rewrite x86_this_cpu_test_bit() and friends as macros
x86/percpu: Fix x86_this_cpu_variable_test_bit() asm template
x86/percpu: Re-enable named address spaces with sanitizers for GCC 13.3+
x86/percpu: Use __force to cast from __percpu address space
x86/percpu: Do not use this_cpu_read_stable_8() for 32-bit targets
x86/percpu: Unify arch_raw_cpu_ptr() defines
x86/percpu: Enable named address spaces for GCC 9.1+
x86/percpu: Re-enable named address spaces with KASAN for GCC 13.3+
x86/percpu: Move raw_percpu_xchg_op() to a better place
x86/percpu: Convert this_percpu_xchg_op() from asm() to C code, to generate better code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
- Fix W^X violation check false-positives in the CPA code
when running as a Xen PV guest
- Fix W^X violation warning false-positives in show_fault_oops()
* tag 'x86-mm-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pat: Fix W^X violation false-positives when running as Xen PV guest
x86/pat: Restructure _lookup_address_cpa()
x86/mm: Use lookup_address_in_pgd_attr() in show_fault_oops()
x86/pat: Introduce lookup_address_in_pgd_attr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fpu updates from Ingo Molnar:
- Fix asm() constraints & modifiers in restore_fpregs_from_fpstate()
- Update comments
- Robustify the free_vm86() definition
* tag 'x86-fpu-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Update fpu_swap_kvm_fpu() uses in comments as well
x86/vm86: Make sure the free_vm86(task) definition uses its parameter even in the !CONFIG_VM86 case
x86/fpu: Fix AMD X86_BUG_FXSAVE_LEAK fixup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry cleanup from Ingo Molnar:
- Merge thunk_64.S and thunk_32.S into thunk.S
* tag 'x86-entry-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Merge thunk_64.S and thunk_32.S into thunk.S
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Ingo Molnar:
- Rework the x86 CPU vendor/family/model code: introduce the 'VFM'
value that is an 8+8+8 bit concatenation of the vendor/family/model
value, and add macros that work on VFM values. This simplifies the
addition of new Intel models & families, and simplifies existing
enumeration & quirk code.
- Add support for the AMD 0x80000026 leaf, to better parse topology
information
- Optimize the NUMA allocation layout of more per-CPU data structures
- Improve the workaround for AMD erratum 1386
- Clear TME from /proc/cpuinfo as well, when disabled by the firmware
- Improve x86 self-tests
- Extend the mce_record tracepoint with the ::ppin and ::microcode fields
- Implement recovery for MCE errors in TDX/SEAM non-root mode
- Misc cleanups and fixes
* tag 'x86-cpu-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
x86/mm: Switch to new Intel CPU model defines
x86/tsc_msr: Switch to new Intel CPU model defines
x86/tsc: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
x86/resctrl: Switch to new Intel CPU model defines
x86/microcode/intel: Switch to new Intel CPU model defines
x86/mce: Switch to new Intel CPU model defines
x86/cpu: Switch to new Intel CPU model defines
x86/cpu/intel_epb: Switch to new Intel CPU model defines
x86/aperfmperf: Switch to new Intel CPU model defines
x86/apic: Switch to new Intel CPU model defines
perf/x86/msr: Switch to new Intel CPU model defines
perf/x86/intel/uncore: Switch to new Intel CPU model defines
perf/x86/intel/pt: Switch to new Intel CPU model defines
perf/x86/lbr: Switch to new Intel CPU model defines
perf/x86/intel/cstate: Switch to new Intel CPU model defines
x86/bugs: Switch to new Intel CPU model defines
x86/bugs: Switch to new Intel CPU model defines
x86/cpu/vfm: Update arch/x86/include/asm/intel-family.h
x86/cpu/vfm: Add new macros to work with (vendor/family/model) values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
- Fix function prototypes to address clang function type cast
warnings in the math-emu code
- Reorder definitions in <asm/msr-index.h>
- Remove unused code
- Fix typos
- Simplify #include sections
* tag 'x86-cleanups-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/ce4100: Remove unused 'struct sim_reg_op'
x86/msr: Move ARCH_CAP_XAPIC_DISABLE bit definition to its rightful place
x86/math-emu: Fix function cast warnings
x86/extable: Remove unused fixup type EX_TYPE_COPY
x86/rtc: Remove unused intel-mid.h
x86/32: Remove unused IA32_STACK_TOP and two externs
x86/head: Simplify relative include path to xen-head.S
x86/fred: Fix typo in Kconfig description
x86/syscall/compat: Remove ia32_unistd.h
x86/syscall/compat: Remove unused macro __SYSCALL_ia32_NR
x86/virt/tdx: Remove duplicate include
x86/xen: Remove duplicate #include
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Ingo Molnar:
- Use -fpic to build the kexec 'purgatory' (the self-contained
code that runs between two kernels)
- Clean up vmlinux.lds.S generation
- Simplify the X86_EXTENDED_PLATFORM section of the x86 Kconfig
- Misc cleanups & fixes
* tag 'x86-build-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Merge the two CONFIG_X86_EXTENDED_PLATFORM entries
x86/purgatory: Switch to the position-independent small code model
x86/boot: Replace __PHYSICAL_START with LOAD_PHYSICAL_ADDR
x86/vmlinux.lds.S: Take __START_KERNEL out conditional definition
x86/vmlinux.lds.S: Remove conditional definition of LOAD_OFFSET
vmlinux.lds.h: Fix a typo in comment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 oops message cleanup from Ingo Molnar:
- Use uniform "Oops: " prefix for die() messages
* tag 'x86-bugs-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Use uniform "Oops: " prefix for die() messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Move the kernel cmdline setup earlier in the boot process (again),
to address a split_lock_detect= boot parameter bug
- Ignore relocations in .notes sections
- Simplify boot stack setup
- Re-introduce a bootloader quirk wrt CR4 handling
- Miscellaneous cleanups & fixes
* tag 'x86-boot-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/64: Clear most of CR4 in startup_64(), except PAE, MCE and LA57
x86/boot: Move kernel cmdline setup earlier in the boot process (again)
x86/build: Clean up arch/x86/tools/relocs.c a bit
x86/boot: Ignore relocations in .notes sections in walk_relocs() too
x86: Rename __{start,end}_init_task to __{start,end}_init_stack
x86/boot: Simplify boot stack setup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
- Clean up & fix asm() operand modifiers & constraints
- Misc cleanups
* tag 'x86-asm-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Remove a superfluous newline in _static_cpu_has()
x86/asm/64: Clean up memset16(), memset32(), memset64() assembly constraints in <asm/string_64.h>
x86/asm: Use "m" operand constraint in WRUSSQ asm template
x86/asm: Use %a instead of %P operand modifier in asm templates
x86/asm: Use %c/%n instead of %P operand modifier in asm templates
x86/asm: Remove %P operand modifier from altinstr asm templates
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull tip tree documentation update from Ingo Molnar:
- Update the -tip maintainers merge policy document wrt
merge window timing
* tag 'x86-misc-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/maintainer-tip: Clarify merge window policy
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
- Combine perf and BPF for fast evalution of HW breakpoint
conditions
- Add LBR capture support outside of hardware events
- Trigger IO signals for watermark_wakeup
- Add RAPL support for Intel Arrow Lake and Lunar Lake
- Optimize frequency-throttling
- Miscellaneous cleanups & fixes
* tag 'perf-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf/bpf: Mark perf_event_set_bpf_handler() and perf_event_free_bpf_handler() as inline too
selftests/perf_events: Test FASYNC with watermark wakeups
perf/ring_buffer: Trigger IO signals for watermark_wakeup
perf: Move perf_event_fasync() to perf_event.h
perf/bpf: Change the !CONFIG_BPF_SYSCALL stubs to static inlines
selftest/bpf: Test a perf BPF program that suppresses side effects
perf/bpf: Allow a BPF program to suppress all sample side effects
perf/bpf: Remove unneeded uses_default_overflow_handler()
perf/bpf: Call BPF handler directly, not through overflow machinery
perf/bpf: Remove #ifdef CONFIG_BPF_SYSCALL from struct perf_event members
perf/bpf: Create bpf_overflow_handler() stub for !CONFIG_BPF_SYSCALL
perf/bpf: Reorder bpf_overflow_handler() ahead of __perf_event_overflow()
perf/x86/rapl: Add support for Intel Lunar Lake
perf/x86/rapl: Add support for Intel Arrow Lake
perf/core: Reduce PMU access to adjust sample freq
perf/core: Optimize perf_adjust_freq_unthr_context()
perf/x86/amd: Don't reject non-sampling events with configured LBR
perf/x86/amd: Support capturing LBR from software events
perf/x86/amd: Avoid taking branches before disabling LBR
perf/x86/amd: Ensure amd_pmu_core_disable_all() is always inlined
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- Over a dozen code generation micro-optimizations for the atomic
and spinlock code
- Add more __ro_after_init attributes
- Robustify the lockdevent_*() macros
* tag 'locking-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/pvqspinlock/x86: Use _Q_LOCKED_VAL in PV_UNLOCK_ASM macro
locking/qspinlock/x86: Micro-optimize virt_spin_lock()
locking/atomic/x86: Merge __arch{,_try}_cmpxchg64_emu_local() with __arch{,_try}_cmpxchg64_emu()
locking/atomic/x86: Introduce arch_try_cmpxchg64_local()
locking/pvqspinlock/x86: Remove redundant CMP after CMPXCHG in __raw_callee_save___pv_queued_spin_unlock()
locking/pvqspinlock: Use try_cmpxchg() in qspinlock_paravirt.h
locking/pvqspinlock: Use try_cmpxchg_acquire() in trylock_clear_pending()
locking/qspinlock: Use atomic_try_cmpxchg_relaxed() in xchg_tail()
locking/atomic/x86: Define arch_atomic_sub() family using arch_atomic_add() functions
locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions
locking/atomic/x86: Introduce arch_atomic64_read_nonatomic() to x86_32
locking/atomic/x86: Introduce arch_atomic64_try_cmpxchg() to x86_32
locking/atomic/x86: Introduce arch_try_cmpxchg64() for !CONFIG_X86_CMPXCHG64
locking/atomic/x86: Modernize x86_32 arch_{,try_}_cmpxchg64{,_local}()
locking/atomic/x86: Correct the definition of __arch_try_cmpxchg128()
x86/tsc: Make __use_tsc __ro_after_init
x86/kvm: Make kvm_async_pf_enabled __ro_after_init
context_tracking: Make context_tracking_key __ro_after_init
jump_label,module: Don't alloc static_key_mod for __ro_after_init keys
locking/qspinlock: Always evaluate lockevent* non-event parameter once
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
- Set driver owner in the core registration so that coreboot drivers
don't need to set it individually
* tag 'tag-chrome-platform-firmware-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: google: cbmem: drop driver owner initialization
firmware: coreboot: store owner from modules with coreboot_driver_register()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Support Framework Laptop 13 and 16 (AMD Ryzen)
Improvements:
- Use sysfs_emit() instead of sprintf() for sysfs' show()
Fixes:
- Fix flex-array-member-not-at-end compiler warnings by using
DEFINE_RAW_FLEX()
- Add HAS_IOPORT dependencies
- Fix long pending events during suspend after resume
Misc cleanups:
- Provide ID tables for avoiding fallback match
- Replace deprecated UNIVERSAL_DEV_PM_OPS()"
* tag 'tag-chrome-platform-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (22 commits)
platform/chrome: cros_ec: Handle events during suspend after resume completion
platform/chrome: cros_ec_lpc: add quirks for the Framework Laptop (AMD)
platform/chrome: cros_ec_lpc: add a "quirks" system
platform/chrome: cros_ec_lpc: pass driver_data from DMI to the device
platform/chrome: cros_ec_lpc: introduce a priv struct for the lpc device
platform/chrome: add HAS_IOPORT dependencies
platform/chrome: cros_hps_i2c: Replace deprecated UNIVERSAL_DEV_PM_OPS()
platform/chrome: cros_kbd_led_backlight: provide ID table for avoiding fallback match
platform/chrome: wilco_ec: core: provide ID table for avoiding fallback match
platform/chrome: wilco_ec: event: remove redundant MODULE_ALIAS
platform/chrome: wilco_ec: debugfs: provide ID table for avoiding fallback match
platform/chrome: wilco_ec: telemetry: provide ID table for avoiding fallback match
platform/chrome: cros_ec_vbc: provide ID table for avoiding fallback match
platform/chrome: cros_ec_lightbar: provide ID table for avoiding fallback match
platform/chrome: cros_ec_sysfs: provide ID table for avoiding fallback match
platform/chrome: cros_ec_debugfs: provide ID table for avoiding fallback match
platform/chrome: cros_ec_chardev: provide ID table for avoiding fallback match
platform/chrome: cros_usbpd_notify: provide ID table for avoiding fallback match
platform/chrome: cros_usbpd_logger: provide ID table for avoiding fallback match
platform/chrome: cros_ec_sensorhub: provide ID table for avoiding fallback match
...
|
|
Pull Rust updates from Miguel Ojeda:
"The most notable change is the drop of the 'alloc' in-tree fork. This
is nicely reflected in the diffstat as a ~10k lines drop. In turn,
this makes the version upgrades way simpler and smaller in the future,
e.g. the latest one in commit 56f64b370612 ("rust: upgrade to Rust
1.78.0").
More importantly, this increases the chances that a newer compiler
version just works, which in turn means supporting several compiler
versions is easier now. Thus we will look into finally setting a
minimum version in the near future.
Toolchain and infrastructure:
- Upgrade to Rust 1.78.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. These allow us to remove
one more unstable feature ('offset_of') from the list, among other
improvements
- Drop 'alloc' in-tree fork of the standard library crate, which
means all the unstable features used by 'alloc' (~30 language ones,
~60 library ones) are not a concern anymore
- Support DWARFv5 via the '-Zdwarf-version' flag
- Support zlib and zstd debuginfo compression via the
'-Zdebuginfo-compression' flag
'kernel' crate:
- Support allocation flags ('GFP_*'), particularly in 'Box' (via
'BoxExt'), 'Vec' (via 'VecExt'), 'Arc' and 'UniqueArc', as well as
in the 'init' module APIs
- Remove usage of the 'allocator_api' unstable feature
- Remove 'try_' prefix in allocation APIs' names
- Add 'VecExt' (an extension trait) to be able to drop the 'alloc'
fork
- Add the '{make,to}_{upper,lower}case()' methods to 'CStr'/'CString'
- Add the 'as_ptr' method to 'ThisModule'
- Add the 'from_raw' method to 'ArcBorrow'
- Add the 'into_unique_or_drop' method to 'Arc'
- Display column number in the 'dbg!' macro output by applying the
equivalent change done to the standard library one
- Migrate 'Work' to '#[pin_data]' thanks to the changes in the
'macros' crate, which allows to remove an unsafe call in its 'new'
associated function
- Prevent namespacing issues when using the '[try_][pin_]init!'
macros by changing the generated name of guard variables
- Make the 'get' method in 'Opaque' const
- Implement the 'Default' trait for 'LockClassKey'
- Remove unneeded 'kernel::prelude' imports from doctests
- Remove redundant imports
'macros' crate:
- Add 'decl_generics' to 'parse_generics()' to support default
values, and use that to allow them in '#[pin_data]'
Helpers:
- Trivial English grammar fix
Documentation:
- Add section on Rust Kselftests to the 'Testing' document
- Expand the 'Abstractions vs. bindings' section of the 'General
Information' document"
* tag 'rust-6.10' of https://github.com/Rust-for-Linux/linux: (31 commits)
rust: alloc: fix dangling pointer in VecExt<T>::reserve()
rust: upgrade to Rust 1.78.0
rust: kernel: remove redundant imports
rust: sync: implement `Default` for `LockClassKey`
docs: rust: extend abstraction and binding documentation
docs: rust: Add instructions for the Rust kselftest
rust: remove unneeded `kernel::prelude` imports from doctests
rust: update `dbg!()` to format column number
rust: helpers: Fix grammar in comment
rust: init: change the generated name of guard variables
rust: sync: add `Arc::into_unique_or_drop`
rust: sync: add `ArcBorrow::from_raw`
rust: types: Make Opaque::get const
rust: kernel: remove usage of `allocator_api` unstable feature
rust: init: update `init` module to take allocation flags
rust: sync: update `Arc` and `UniqueArc` to take allocation flags
rust: alloc: update `VecExt` to take allocation flags
rust: alloc: introduce the `BoxExt` trait
rust: alloc: introduce allocation flags
rust: alloc: remove our fork of the `alloc` crate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove crypto stats interface
Algorithms:
- Add faster AES-XTS on modern x86_64 CPUs
- Forbid curves with order less than 224 bits in ecc (FIPS 186-5)
- Add ECDSA NIST P521
Drivers:
- Expose otp zone in atmel
- Add dh fallback for primes > 4K in qat
- Add interface for live migration in qat
- Use dma for aes requests in starfive
- Add full DMA support for stm32mpx in stm32
- Add Tegra Security Engine driver
Others:
- Introduce scope-based x509_certificate allocation"
* tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits)
crypto: atmel-sha204a - provide the otp content
crypto: atmel-sha204a - add reading from otp zone
crypto: atmel-i2c - rename read function
crypto: atmel-i2c - add missing arg description
crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy()
crypto: sahara - use 'time_left' variable with wait_for_completion_timeout()
crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout()
crypto: caam - i.MX8ULP donot have CAAM page0 access
crypto: caam - init-clk based on caam-page0-access
crypto: starfive - Use fallback for unaligned dma access
crypto: starfive - Do not free stack buffer
crypto: starfive - Skip unneeded fallback allocation
crypto: starfive - Skip dma setup for zeroed message
crypto: hisilicon/sec2 - fix for register offset
crypto: hisilicon/debugfs - mask the unnecessary info from the dump
crypto: qat - specify firmware files for 402xx
crypto: x86/aes-gcm - simplify GCM hash subkey derivation
crypto: x86/aes-gcm - delete unused GCM assembly code
crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath()
hwrng: stm32 - repair clock handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"The bulk of the changes here are related to refactoring and expanding
the KUnit tests for string helper and fortify behavior.
Some trivial strncpy replacements in fs/ were carried in my tree. Also
some fixes to SCSI string handling were carried in my tree since the
helper for those was introduce here. Beyond that, just little fixes
all around: objtool getting confused about LKDTM+KCFI, preparing for
future refactors (constification of sysctl tables, additional
__counted_by annotations), a Clang UBSAN+i386 crash fix, and adding
more options in the hardening.config Kconfig fragment.
Summary:
- selftests: Add str*cmp tests (Ivan Orlov)
- __counted_by: provide UAPI for _le/_be variants (Erick Archer)
- Various strncpy deprecation refactors (Justin Stitt)
- stackleak: Use a copy of soon-to-be-const sysctl table (Thomas
Weißschuh)
- UBSAN: Work around i386 -regparm=3 bug with Clang prior to
version 19
- Provide helper to deal with non-NUL-terminated string copying
- SCSI: Fix older string copying bugs (with new helper)
- selftests: Consolidate string helper behavioral tests
- selftests: add memcpy() fortify tests
- string: Add additional __realloc_size() annotations for "dup"
helpers
- LKDTM: Fix KCFI+rodata+objtool confusion
- hardening.config: Enable KCFI"
* tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (29 commits)
uapi: stddef.h: Provide UAPI macros for __counted_by_{le, be}
stackleak: Use a copy of the ctl_table argument
string: Add additional __realloc_size() annotations for "dup" helpers
kunit/fortify: Fix replaced failure path to unbreak __alloc_size
hardening: Enable KCFI and some other options
lkdtm: Disable CFI checking for perms functions
kunit/fortify: Add memcpy() tests
kunit/fortify: Do not spam logs with fortify WARNs
kunit/fortify: Rename tests to use recommended conventions
init: replace deprecated strncpy with strscpy_pad
kunit/fortify: Fix mismatched kvalloc()/vfree() usage
scsi: qla2xxx: Avoid possible run-time warning with long model_num
scsi: mpi3mr: Avoid possible run-time warning with long manufacturer strings
scsi: mptfusion: Avoid possible run-time warning with long manufacturer strings
fs: ecryptfs: replace deprecated strncpy with strscpy
hfsplus: refactor copy_name to not use strncpy
reiserfs: replace deprecated strncpy with scnprintf
virt: acrn: replace deprecated strncpy with strscpy
ubsan: Avoid i386 UBSAN handler crashes with Clang
ubsan: Remove 1-element array usage in debug reporting
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Provide knob to change (previously fixed) coredump NOTES size
(Allen Pais)
- Add sched_prepare_exec tracepoint (Marco Elver)
- Make /proc/$pid/auxv work under binfmt_elf_fdpic (Max Filippov)
- Convert ARCH_HAVE_EXTRA_ELF_NOTES to proper Kconfig (Vignesh
Balasubramanian)
- Leave a gap between .bss and brk
* tag 'execve-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fs/coredump: Enable dynamic configuration of max file note size
binfmt_elf_fdpic: fix /proc/<pid>/auxv
binfmt_elf: Leave a gap between .bss and brk
Replace macro "ARCH_HAVE_EXTRA_ELF_NOTES" with kconfig
tracing: Add sched_prepare_exec tracepoint
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp update from Kees Cook:
- Prepare for sysctl table constification
* tag 'seccomp-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Constify sysctl subhelpers
|
|
Pull block updates from Jens Axboe:
- Add a partscan attribute in sysfs, fixing an issue with systemd
relying on an internal interface that went away.
- Attempt #2 at making long running discards interruptible. The
previous attempt went into 6.9, but we ended up mostly reverting it
as it had issues.
- Remove old ida_simple API in bcache
- Support for zoned write plugging, greatly improving the performance
on zoned devices.
- Remove the old throttle low interface, which has been experimental
since 2017 and never made it beyond that and isn't being used.
- Remove page->index debugging checks in brd, as it hasn't caught
anything and prepares us for removing in struct page.
- MD pull request from Song
- Don't schedule block workers on isolated CPUs
* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
blk-throttle: delay initialization until configuration
blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
block: fix that util can be greater than 100%
block: support to account io_ticks precisely
block: add plug while submitting IO
bcache: fix variable length array abuse in btree_iter
bcache: Remove usage of the deprecated ida_simple_xx() API
md: Revert "md: Fix overflow in is_mddev_idle"
blk-lib: check for kill signal in ioctl BLKDISCARD
block: add a bio_await_chain helper
block: add a blk_alloc_discard_bio helper
block: add a bio_chain_and_submit helper
block: move discard checks into the ioctl handler
block: remove the discard_granularity check in __blkdev_issue_discard
block/ioctl: prefer different overflow check
null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
block: fix and simplify blkdevparts= cmdline parsing
block: refine the EOF check in blkdev_iomap_begin
block: add a partscan sysfs attribute for disks
block: add a disk_has_partscan helper
...
|
|
Pull io_uring updates from Jens Axboe:
- Greatly improve send zerocopy performance, by enabling coalescing of
sent buffers.
MSG_ZEROCOPY already does this with send(2) and sendmsg(2), but the
io_uring side did not. In local testing, the crossover point for send
zerocopy being faster is now around 3000 byte packets, and it
performs better than the sync syscall variants as well.
This feature relies on a shared branch with net-next, which was
pulled into both branches.
- Unification of how async preparation is done across opcodes.
Previously, opcodes that required extra memory for async retry would
allocate that as needed, using on-stack state until that was the
case. If async retry was needed, the on-stack state was adjusted
appropriately for a retry and then copied to the allocated memory.
This led to some fragile and ugly code, particularly for read/write
handling, and made storage retries more difficult than they needed to
be. Allocate the memory upfront, as it's cheap from our pools, and
use that state consistently both initially and also from the retry
side.
- Move away from using remap_pfn_range() for mapping the rings.
This is really not the right interface to use and can cause lifetime
issues or leaks. Additionally, it means the ring sq/cq arrays need to
be physically contigious, which can cause problems in production with
larger rings when services are restarted, as memory can be very
fragmented at that point.
Move to using vm_insert_page(s) for the ring sq/cq arrays, and apply
the same treatment to mapped ring provided buffers. This also helps
unify the code we have dealing with allocating and mapping memory.
Hard to see in the diffstat as we're adding a few features as well,
but this kills about ~400 lines of code from the codebase as well.
- Add support for bundles for send/recv.
When used with provided buffers, bundles support sending or receiving
more than one buffer at the time, improving the efficiency by only
needing to call into the networking stack once for multiple sends or
receives.
- Tweaks for our accept operations, supporting both a DONTWAIT flag for
skipping poll arm and retry if we can, and a POLLFIRST flag that the
application can use to skip the initial accept attempt and rely
purely on poll for triggering the operation. Both of these have
identical flags on the receive side already.
- Make the task_work ctx locking unconditional.
We had various code paths here that would do a mix of lock/trylock
and set the task_work state to whether or not it was locked. All of
that goes away, we lock it unconditionally and get rid of the state
flag indicating whether it's locked or not.
The state struct still exists as an empty type, can go away in the
future.
- Add support for specifying NOP completion values, allowing it to be
used for error handling testing.
- Use set/test bit for io-wq worker flags. Not strictly needed, but
also doesn't hurt and helps silence a KCSAN warning.
- Cleanups for io-wq locking and work assignments, closing a tiny race
where cancelations would not be able to find the work item reliably.
- Misc fixes, cleanups, and improvements
* tag 'for-6.10/io_uring-20240511' of git://git.kernel.dk/linux: (97 commits)
io_uring: support to inject result for NOP
io_uring: fail NOP if non-zero op flags is passed in
io_uring/net: add IORING_ACCEPT_POLL_FIRST flag
io_uring/net: add IORING_ACCEPT_DONTWAIT flag
io_uring/filetable: don't unnecessarily clear/reset bitmap
io_uring/io-wq: Use set_bit() and test_bit() at worker->flags
io_uring/msg_ring: cleanup posting to IOPOLL vs !IOPOLL ring
io_uring: Require zeroed sqe->len on provided-buffers send
io_uring/notif: disable LAZY_WAKE for linked notifs
io_uring/net: fix sendzc lazy wake polling
io_uring/msg_ring: reuse ctx->submitter_task read using READ_ONCE instead of re-reading it
io_uring/rw: reinstate thread check for retries
io_uring/notif: implement notification stacking
io_uring/notif: simplify io_notif_flush()
net: add callback for setting a ubuf_info to skb
net: extend ubuf_info callback to ops structure
io_uring/net: support bundles for recv
io_uring/net: support bundles for send
io_uring/kbuf: add helpers for getting/peeking multiple buffers
io_uring/net: add provided buffer support for IORING_OP_SEND
...
|
|
Pull vfs rw iterator updates from Christian Brauner:
"The core fs signalfd, userfaultfd, and timerfd subsystems did still
use f_op->read() instead of f_op->read_iter(). Convert them over since
we should aim to get rid of f_op->read() at some point.
Aside from that io_uring and others want to mark files as FMODE_NOWAIT
so it can make use of per-IO nonblocking hints to enable more
efficient IO. Converting those users to f_op->read_iter() allows them
to be marked with FMODE_NOWAIT"
* tag 'vfs-6.10.rw' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
signalfd: convert to ->read_iter()
userfaultfd: convert to ->read_iter()
timerfd: convert to ->read_iter()
new helper: copy_to_iter_full()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
"This reworks the netfslib writeback implementation so that pages read
from the cache are written to the cache through ->writepages(),
thereby allowing the fscache page flag to be retired.
The reworking also:
- builds on top of the new writeback_iter() infrastructure
- makes it possible to use vectored write RPCs as discontiguous
streams of pages can be accommodated
- makes it easier to do simultaneous content crypto and stream
division
- provides support for retrying writes and re-dividing a stream
- replaces the ->launder_folio() op, so that ->writepages() is used
instead
- uses mempools to allocate the netfs_io_request and
netfs_io_subrequest structs to avoid allocation failure in the
writeback path
Some code that uses the fscache page flag is retained for
compatibility purposes with nfs and ceph. The code is switched to
using the synonymous private_2 label instead and marked with
deprecation comments.
The merge commit contains additional details on the new algorithm that
I've left out of here as it would probably be excessively detailed.
On top of the netfslib infrastructure this contains the work to
convert cifs over to netfslib"
* tag 'vfs-6.10.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
cifs: Enable large folio support
cifs: Remove some code that's no longer used, part 3
cifs: Remove some code that's no longer used, part 2
cifs: Remove some code that's no longer used, part 1
cifs: Cut over to using netfslib
cifs: Implement netfslib hooks
cifs: Make add_credits_and_wake_if() clear deducted credits
cifs: Add mempools for cifs_io_request and cifs_io_subrequest structs
cifs: Set zero_point in the copy_file_range() and remap_file_range()
cifs: Move cifs_loose_read_iter() and cifs_file_write_iter() to file.c
cifs: Replace the writedata replay bool with a netfs sreq flag
cifs: Make wait_mtu_credits take size_t args
cifs: Use more fields from netfs_io_subrequest
cifs: Replace cifs_writedata with a wrapper around netfs_io_subrequest
cifs: Replace cifs_readdata with a wrapper around netfs_io_subrequest
cifs: Use alternative invalidation to using launder_folio
netfs, afs: Use writeback retry to deal with alternate keys
netfs: Miscellaneous tidy ups
netfs: Remove the old writeback code
netfs: Cut over to using new writeback code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount API conversions from Christian Brauner:
"This converts qnx6, minix, debugfs, tracefs, freevxfs, and openpromfs
to the new mount api, further reducing the number of filesystems
relying on the legacy mount api"
* tag 'vfs-6.10.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
minix: convert minix to use the new mount api
vfs: Convert tracefs to use the new mount API
vfs: Convert debugfs to use the new mount API
openpromfs: finish conversion to the new mount API
freevxfs: Convert freevxfs to the new mount API.
qnx6: convert qnx6 to use the new mount api
|
|
Merge an ACPI pfrut utility update, an ACPI documentation update and a
PNP update for 6.10:
- Fix a typo in the ACPI documentation regarding the layout of sysfs
subdirectory representing the ACPI namespace (John Watts).
- Make the ACPI pfrut utility print the update_cap field during
capability query (Chen Yu).
- Add HAS_IOPORT dependencies to PNP (Niklas Schnelle).
* acpi-tools:
ACPI: tools: pfrut: Print the update_cap field during capability query
* acpi-docs:
Documentation: firmware-guide: ACPI: Fix namespace typo
* pnp:
PNP: add HAS_IOPORT dependencies
|
|
Merge x86-specific ACPI updates, an ACPI DPTF driver update adding new
platform support to it, and an ACPI APEI update:
- Add a num-cs device property to specify the number of chip selects
for Intel Braswell to the ACPI LPSS (Intel SoC) driver and remove a
nested CONFIG_PM #ifdef from it (Andy Shevchenko).
- Move three x86-specific ACPI files to the x86 directory (Andy
Shevchenko).
- Mark SMO8810 accel on Dell XPS 15 9550 as always present and add a
PNP_UART1_SKIP quirk for Lenovo Blade2 tablets (Hans de Goede).
- Move acpi_blacklisted() declaration to asm/acpi.h (Kuppuswamy
Sathyanarayanan).
- Add Lunar Lake support to the ACPI DPTF driver (Sumeet Pawnikar).
- Mark the einj_driver driver's remove callback as __exit because it
cannot get unbound via sysfs (Uwe Kleine-König).
* acpi-x86:
ACPI: Move acpi_blacklisted() declaration to asm/acpi.h
ACPI: x86: Add PNP_UART1_SKIP quirk for Lenovo Blade2 tablets
ACPI: x86: utils: Mark SMO8810 accel on Dell XPS 15 9550 as always present
ACPI: x86: Move LPSS to x86 folder
ACPI: x86: Move blacklist to x86 folder
ACPI: x86: Move acpi_cmos_rtc to x86 folder
ACPI: x86: Introduce a Makefile
ACPI: LPSS: Remove nested ifdeffery for CONFIG_PM
ACPI: LPSS: Advertise number of chip selects via property
* acpi-dptf:
ACPI: DPTF: Add Lunar Lake support
* acpi-apei:
ACPI: APEI: EINJ: mark remove callback as __exit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Free up FMODE_* bits. I've freed up bits 6, 7, 8, and 24. That
means we now have six free FMODE_* bits in total (but bit #6
already got used for FMODE_WRITE_RESTRICTED)
- Add FOP_HUGE_PAGES flag (follow-up to FMODE_* cleanup)
- Add fd_raw cleanup class so we can make use of automatic cleanup
provided by CLASS(fd_raw, f)(fd) for O_PATH fds as well
- Optimize seq_puts()
- Simplify __seq_puts()
- Add new anon_inode_getfile_fmode() api to allow specifying f_mode
instead of open-coding it in multiple places
- Annotate struct file_handle with __counted_by() and use
struct_size()
- Warn in get_file() whether f_count resurrection from zero is
attempted (epoll/drm discussion)
- Folio-sophize aio
- Export the subvolume id in statx() for both btrfs and bcachefs
- Relax linkat(AT_EMPTY_PATH) requirements
- Add F_DUPFD_QUERY fcntl() allowing to compare two file descriptors
for dup*() equality replacing kcmp()
Cleanups:
- Compile out swapfile inode checks when swap isn't enabled
- Use (1 << n) notation for FMODE_* bitshifts for clarity
- Remove redundant variable assignment in fs/direct-io
- Cleanup uses of strncpy in orangefs
- Speed up and cleanup writeback
- Move fsparam_string_empty() helper into header since it's currently
open-coded in multiple places
- Add kernel-doc comments to proc_create_net_data_write()
- Don't needlessly read dentry->d_flags twice
Fixes:
- Fix out-of-range warning in nilfs2
- Fix ecryptfs overflow due to wrong encryption packet size
calculation
- Fix overly long line in xfs file_operations (follow-up to FMODE_*
cleanup)
- Don't raise FOP_BUFFER_{R,W}ASYNC for directories in xfs (follow-up
to FMODE_* cleanup)
- Don't call xfs_file_open from xfs_dir_open (follow-up to FMODE_*
cleanup)
- Fix stable offset api to prevent endless loops
- Fix afs file server rotations
- Prevent xattr node from overflowing the eraseblock in jffs2
- Move fdinfo PTRACE_MODE_READ procfs check into the .permission()
operation instead of .open() operation since this caused userspace
regressions"
* tag 'vfs-6.10.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
afs: Fix fileserver rotation getting stuck
selftests: add F_DUPDFD_QUERY selftests
fcntl: add F_DUPFD_QUERY fcntl()
file: add fd_raw cleanup class
fs: WARN when f_count resurrection is attempted
seq_file: Simplify __seq_puts()
seq_file: Optimize seq_puts()
proc: Move fdinfo PTRACE_MODE_READ check into the inode .permission operation
fs: Create anon_inode_getfile_fmode()
xfs: don't call xfs_file_open from xfs_dir_open
xfs: drop fop_flags for directories
xfs: fix overly long line in the file_operations
shmem: Fix shmem_rename2()
libfs: Add simple_offset_rename() API
libfs: Fix simple_offset_rename_exchange()
jffs2: prevent xattr node from overflowing the eraseblock
vfs, swap: compile out IS_SWAPFILE() on swapless configs
vfs: relax linkat() AT_EMPTY_PATH - aka flink() - requirements
fs/direct-io: remove redundant assignment to variable retval
fs/dcache: Re-use value stored to dentry->d_flags instead of re-reading
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iomap updates from Christian Brauner:
"This contains a few cleanups to the iomap code. Nothing particularly
stands out"
* tag 'vfs-6.10.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: do some small logical cleanup in buffered write
iomap: make iomap_write_end() return a boolean
iomap: use a new variable to handle the written bytes in iomap_write_iter()
iomap: don't increase i_size if it's not a write operation
iomap: drop the write failure handles when unsharing and zeroing
iomap: convert iomap_writepages to writeack_iter
|
|
Merge Enery Model update and a power management documentation update for
6.10:
- Make the Samsung exynos-asv driver update the Energy Model after
adjusting voltage on top of some preliminary changes of the OPP and
Enery Model generic code (Lukasz Luba).
- Remove a reference to a function that has been dropped from the power
management documentation (Bjorn Helgaas).
* pm-em:
soc: samsung: exynos-asv: Update Energy Model after adjusting voltage
PM: EM: Add em_dev_update_chip_binning()
PM: EM: Refactor em_adjust_new_capacity()
OPP: OF: Export dev_opp_pm_calc_power() for usage from EM
* pm-docs:
Documentation: PM: Update platform_pci_wakeup_init() reference
|
|
Merge cpuidle updates, changes related to system sleep and power capping
updates for 6.10:
- Fix kerneldoc description of ladder_do_selection() (Jeff Johnson).
- Convert the cpuidle kirkwood driver to platform remove callback
returning void (Yangtao Li).
- Replace deprecated strncpy() with strscpy() in the hibernation core
code (Justin Stitt).
- Use %ps to simplify debug output in the core system-wide suspend and
resume code (Len Brown).
- Remove unnecessary else from device_init_wakeup() and make
device_wakeup_disable() return void (Dhruva Gole).
- Enable PMU support in the Intel TPMI RAPL driver (Zhang Rui).
- Add support for ArrowLake-H platform to the Intel RAPL driver (Zhang
Rui).
- Avoid explicit cpumask allocation on stack in DTPM (Dawei Li).
* pm-cpuidle:
cpuidle: ladder: fix ladder_do_selection() kernel-doc
cpuidle: kirkwood: Convert to platform remove callback returning void
* pm-sleep:
PM: hibernate: replace deprecated strncpy() with strscpy()
PM: sleep: Take advantage of %ps to simplify debug output
PM: wakeup: Remove unnecessary else from device_init_wakeup()
PM: wakeup: make device_wakeup_disable() return void
* pm-powercap:
powercap: intel_rapl_tpmi: Enable PMU support
powercap: intel_rapl: Introduce APIs for PMU support
powercap: intel_rapl: Sort header files
powercap: intel_rapl: Add support for ArrowLake-H platform
powercap: DTPM: Avoid explicit cpumask allocation on stack
|
|
Merge cpufreq updates for 6.10:
- Rework the handling of disabled turbo in the intel_pstate driver and
make it update the maximum CPU frequency consistently regardless of
the reason on top of a number of cleanups (Rafael Wysocki).
- Add missing checks for NULL .exit() cpufreq driver callback to the
cpufreq core (Viresh Kumar).
- Prevent pulicy->max from going above the frequency QoS maximum value
when cpufreq_frequency_table_verify() is used (Xuewen Yan).
- Prevent a negative CPU number or frequency value from being printed
if they are really large (Joshua Yeong).
- Update MAINTAINERS entry for amd-pstate to add two new submaintainers
and a designated reviewer (Huang Rui).
- Clean up the amd-pstate driver and update its documentation (Gautham
Shenoy).
- Fix the highest frequency issue in the amd-pstate driver which limits
performance (Perry Yuan).
- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature (Perry Yuan).
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing (Perry Yuan).
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability (Perry Yuan).
- Sun50i: Add support for opp_supported_hw, H616 platform and general
cleanups (Andre Przywara, Martin Botka, Brandon Cheo Fusi, Dan
Carpenter, Viresh Kumar).
- CPPC: Fix possible null pointer dereference (Aleksandr Mishin).
- Eliminate uses of of_node_put() (Javier Carrasco, and Shivani Gupta).
- brcmstb-avs: ISO C90 forbids mixed declarations (Portia Stephens).
- mediatek: Add support for MT7988A (Sam Shih).
- cpufreq-qcom-hw: Add SM4450 compatibles in DT bindings (Tengfei Fan).
- Fix struct cpudata::epp_cached kernel-doc in the intel_pstate cpufreq
driver (Jeff Johnson).
* pm-cpufreq: (46 commits)
cpufreq: amd-pstate: fix the highest frequency issue which limits performance
cpufreq: intel_pstate: fix struct cpudata::epp_cached kernel-doc
cpufreq: Fix up printing large CPU numbers and frequency values
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
cpufreq: amd-pstate: Remove amd_get_{min,max,nominal,lowest_nonlinear}_freq()
cpufreq: amd-pstate: Unify computation of {max,min,nominal,lowest_nonlinear}_freq
cpufreq: amd-pstate: Document the units for freq variables in amd_cpudata
cpufreq: amd-pstate: Document *_limit_* fields in struct amd_cpudata
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM4450 compatibles
cpufreq: sun50i: fix error returns in dt_has_supported_hw()
cpufreq: brcmstb-avs-cpufreq: ISO C90 forbids mixed declarations
cpufreq: dt-platdev: eliminate uses of of_node_put()
cpufreq: dt: eliminate uses of of_node_put()
cpufreq: ti: Implement scope-based cleanup in ti_cpufreq_match_node()
...
|
|
Pull documentation updates from Jonathan Corbet:
"Another not-too-busy cycle for documentation, including:
- Some build-system changes to detect the variable fonts installed by
some distributions that can break the PDF build.
- Various updates and additions to the Spanish, Chinese, Italian, and
Japanese translations.
- Update the stable-kernel rules to match modern practice
... and the usual array of corrections, updates, and typo fixes"
* tag 'docs-6.10' of git://git.lwn.net/linux: (42 commits)
cgroup: Add documentation for missing zswap memory.stat
kernel-doc: Added "*" in $type_constants2 to fix 'make htmldocs' warning.
docs:core-api: fixed typos and grammar in printk-index page
Documentation: tracing: Fix spelling mistakes
docs/zh_CN/rust: Update the translation of quick-start to 6.9-rc4
docs/zh_CN/rust: Update the translation of general-information to 6.9-rc4
docs/zh_CN/rust: Update the translation of coding-guidelines to 6.9-rc4
docs/zh_CN/rust: Update the translation of arch-support to 6.9-rc4
docs: stable-kernel-rules: fix typo sent->send
docs/zh_CN: remove two inconsistent spaces
docs: scripts/check-variable-fonts.sh: Improve commands for detection
docs: stable-kernel-rules: create special tag to flag 'no backporting'
docs: stable-kernel-rules: explain use of stable@kernel.org (w/o @vger.)
docs: stable-kernel-rules: remove code-labels tags and a indention level
docs: stable-kernel-rules: call mainline by its name and change example
docs: stable-kernel-rules: reduce redundancy
docs, kprobes: Add riscv as supported architecture
Docs: typos/spelling
docs: kernel_include.py: Cope with docutils 0.21
docs: ja_JP/howto: Catch up update in v6.8
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys updates from Jarkko Sakkinen:
- do not overwrite the key expiration once it is set
- move key quota updates earlier into key_put(), instead of updating
them in key_gc_unused_keys()
* tag 'keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys: Fix overwrite of key expiration on instantiation
keys: update key quotas in key_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM updates from Jarkko Sakkinen:
"These are the changes for the TPM driver with a single major new
feature: TPM bus encryption and integrity protection. The key pair on
TPM side is generated from so called null random seed per power on of
the machine [1]. This supports the TPM encryption of the hard drive by
adding layer of protection against bus interposer attacks.
Other than that, a few minor fixes and documentation for tpm_tis to
clarify basics of TPM localities for future patch review discussions
(will be extended and refined over times, just a seed)"
Link: https://lore.kernel.org/linux-integrity/20240429202811.13643-1-James.Bottomley@HansenPartnership.com/ [1]
* tag 'tpmdd-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: (28 commits)
Documentation: tpm: Add TPM security docs toctree entry
tpm: disable the TPM if NULL name changes
Documentation: add tpm-security.rst
tpm: add the null key name as a sysfs export
KEYS: trusted: Add session encryption protection to the seal/unseal path
tpm: add session encryption protection to tpm2_get_random()
tpm: add hmac checks to tpm2_pcr_extend()
tpm: Add the rest of the session HMAC API
tpm: Add HMAC session name/handle append
tpm: Add HMAC session start and end functions
tpm: Add TCG mandated Key Derivation Functions (KDFs)
tpm: Add NULL primary creation
tpm: export the context save and load commands
tpm: add buffer function to point to returned parameters
crypto: lib - implement library version of AES in CFB mode
KEYS: trusted: tpm2: Use struct tpm_buf for sized buffers
tpm: Add tpm_buf_read_{u8,u16,u32}
tpm: TPM2B formatted buffers
tpm: Store the length of the tpm_buf data separately.
tpm: Update struct tpm_buf documentation comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull trusted keys updates from Jarkko Sakkinen:
"This contains a new key type for the Data Co-Processor (DCP), which is
an IP core built into many NXP SoCs such as i.mx6ull"
* tag 'keys-trusted-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
docs: trusted-encrypted: add DCP as new trust source
docs: document DCP-backed trusted keys kernel params
MAINTAINERS: add entry for DCP-based trusted keys
KEYS: trusted: Introduce NXP DCP-backed trusted keys
KEYS: trusted: improve scalability of trust source config
crypto: mxs-dcp: Add support for hardware-bound keys
|
|
Make ACPI resource management quirks, a documentation update related to
the ACPI handling of device properties and ACPI NUMA handling changes
for 6.10:
- Add ACPI IRQ override quirks for Asus Vivobook Pro N6506MV, TongFang
GXxHRXx and GMxHGxx, and XMG APEX 17 M23 (Guenter Schafranek, Tamim
Khan, Christoffer Sandberg).
- Add reference to UEFI DSD Guide to the documentation related to the
ACPI handling of device properties (Sakari Ailus).
- Fix SRAT lookup of CFMWS ranges with numa_fill_memblks(), remove
lefover architecture-dependent code from the ACPI NUMA handling code
and simplify it on top of that (Robert Richter).
* acpi-resource:
ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MV
ACPI: resource: Do IRQ override on TongFang GXxHRXx and GMxHGxx
ACPI: resource: Do IRQ override on GMxBGxx (XMG APEX 17 M23)
* acpi-property:
ACPI: property: Add reference to UEFI DSD Guide
* acpi-numa:
ACPI/NUMA: Squash acpi_numa_memory_affinity_init() into acpi_parse_memory_affinity()
ACPI/NUMA: Squash acpi_numa_slit_init() into acpi_parse_slit()
ACPI/NUMA: Remove architecture dependent remainings
x86/numa: Fix SRAT lookup of CFMWS ranges with numa_fill_memblks()
|
|
Merge ACPI device enumeration changes and ACPI data-only tables support
updates for 6.10:
- Rearrange fields in several structures to effectively eliminate
computations from container_of() in some cases (Andy Shevchenko).
- Do some assorted cleanups of the ACPI device enumeration code (Andy
Shevchenko).
- Make the ACPI device enumeration code skip devices with _STA values
clearly identified by the specification as invalid (Rafael Wysocki).
- Rework the handling of the NHLT table to simplify and clarify it and
drop some obsolete pieces (Cezary Rojewski).
* acpi-scan:
ACPI: scan: Avoid enumerating devices with clearly invalid _STA values
ACPI: scan: Introduce typedef:s for struct acpi_hotplug_context members
ACPI: scan: Use standard error checking pattern
ACPI: scan: Move misleading comment to acpi_dma_configure_id()
ACPI: scan: Use list_first_entry_or_null() in acpi_device_hid()
ACPI: bus: Don't use "proxy" headers
ACPI: bus: Make container_of() no-op where it makes sense
* acpi-tables:
ACPI: NHLT: Streamline struct naming
ACPI: NHLT: Drop redundant types
ACPI: NHLT: Introduce API for the table
ACPI: NHLT: Reintroduce types the table consists of
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"This time it's mostly random cleanups and fixes, with two performance
fixes that might have significant impact, but limited to systems
experiencing particular bad corner case scenarios rather than general
performance improvements.
The memcg hook changes are going through the mm tree due to
dependencies.
- Prevent stalls when reading /proc/slabinfo (Jianfeng Wang)
This fixes the long-standing problem that can happen with workloads
that have alloc/free patterns resulting in many partially used
slabs (in e.g. dentry cache). Reading /proc/slabinfo will traverse
the long partial slab list under spinlock with disabled irqs and
thus can stall other processes or even trigger the lockup
detection. The traversal is only done to count free objects so that
<active_objs> column can be reported along with <num_objs>.
To avoid affecting fast paths with another shared counter
(attempted in the past) or complex partial list traversal schemes
that allow rescheduling, the chosen solution resorts to
approximation - when the partial list is over 10000 slabs long, we
will only traverse first 5000 slabs from head and tail each and use
the average of those to estimate the whole list. Both head and tail
are used as the slabs near head to tend to have more free objects
than the slabs towards the tail.
It is expected the approximation should not break existing
/proc/slabinfo consumers. The <num_objs> field is still accurate
and reflects the overall kmem_cache footprint. The <active_objs>
was already imprecise due to cpu and percpu-partial slabs, so can't
be relied upon to determine exact cache usage. The difference
between <active_objs> and <num_objs> is mainly useful to determine
the slab fragmentation, and that will be possible even with the
approximation in place.
- Prevent allocating many slabs when a NUMA node is full (Chen Jun)
Currently, on NUMA systems with a node under significantly bigger
pressure than other nodes, the fallback strategy may result in each
kmalloc_node() that can't be safisfied from the preferred node, to
allocate a new slab on a fallback node, and not reuse the slabs
already on that node's partial list.
This is now fixed and partial lists of fallback nodes are checked
even for kmalloc_node() allocations. It's still preferred to
allocate a new slab on the requested node before a fallback, but
only with a GFP_NOWAIT attempt, which will fail quickly when the
node is under a significant memory pressure.
- More SLAB removal related cleanups (Xiu Jianfeng, Hyunmin Lee)
- Fix slub_kunit self-test with hardened freelists (Guenter Roeck)
- Mark racy accesses for KCSAN (linke li)
- Misc cleanups (Xiongwei Song, Haifeng Xu, Sangyun Kim)"
* tag 'slab-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: remove the check for NULL kmalloc_caches
mm/slub: create kmalloc 96 and 192 caches regardless cache size order
mm/slub: mark racy access on slab->freelist
slub: use count_partial_free_approx() in slab_out_of_memory()
slub: introduce count_partial_free_approx()
slub: Set __GFP_COMP in kmem_cache by default
mm/slub: remove duplicate initialization for early_kmem_cache_node_alloc()
mm/slub: correct comment in do_slab_free()
mm/slub, kunit: Use inverted data to corrupt kmem cache
mm/slub: simplify get_partial_node()
mm/slub: add slub_get_cpu_partial() helper
mm/slub: remove the check of !kmem_cache_has_cpu_partial()
mm/slub: Reduce memory consumption in extreme scenarios
mm/slub: mark racy accesses on slab->slabs
mm/slub: remove dummy slabinfo functions
|
|
Merge changes related to _OSC handling and updates eliminating the owner
field from struct acpi_driver:
- Make the kernel indicate support for several ACPI features that are
in fact supported to the platform firmware through _OSC and fix
the Generic Initiator Affinity _OSC bit (Armin Wolf).
- Make the ACPI core set the owner value for ACPI drivers, drop the
owner setting from a number of drivers and eliminate the owner
field from struct acpi_driver (Krzysztof Kozlowski).
* acpi-bus: (24 commits)
ACPI: drop redundant owner from acpi_driver
virt: vmgenid: drop owner assignment
ptp: vmw: drop owner assignment
platform/x86/wireless-hotkey: drop owner assignment
platform/x86/toshiba_haps: drop owner assignment
platform/x86/toshiba_bluetooth: drop owner assignment
platform/x86/toshiba_acpi: drop owner assignment
platform/x86/sony-laptop: drop owner assignment
platform/x86/lg-laptop: drop owner assignment
platform/x86/intel/smartconnect: drop owner assignment
platform/x86/intel/rst: drop owner assignment
platform/x86/eeepc: drop owner assignment
platform/x86/dell: drop owner assignment
platform: classmate-laptop: drop owner assignment
platform: asus-laptop: drop owner assignment
platform/chrome: wilco_ec: drop owner assignment
net: fjes: drop owner assignment
Input: atlas - drop owner assignment
ACPI: store owner from modules with acpi_bus_register_driver()
ACPI: bus: Indicate support for IRQ ResourceSource thru _OSC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull kcsan update from Paul McKenney:
"Introduce __data_racy type qualifier
This adds a __data_racy type qualifier that enables kernel developers
to inform KCSAN that a given variable is a shared variable without
needing to mark each and every access.
This allows pre-KCSAN code to be correctly (if approximately)
instrumented withh very little effort, and also provides people
reading the code a clear indication that the variable is in fact
shared.
In addition, it permits incremental transition to per-access KCSAN
marking, so that (for example) a given subsystem can be transitioned
one variable at a time, while avoiding large numbers of KCSAN warnings
during this transition"
* tag 'kcsan.2024.05.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan, compiler_types: Introduce __data_racy type qualifier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull LKMM documentation updates from Paul McKenney:
"This upgrades LKMM documentation, perhaps most notably adding a number
of litmus tests illustrating cmpxchg() ordering properties.
TL;DR: Failing cmpxchg() operations provide no ordering"
* tag 'lkmm.2024.05.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
Documentation/litmus-tests: Make cmpxchg() tests safe for klitmus
Documentation/atomic_t: Emphasize that failed atomic operations give no ordering
Documentation/litmus-tests: Demonstrate unordered failing cmpxchg
Documentation/litmus-tests: Add locking tests to README
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull cmpxchg updates from Paul McKenney:
"Provide one-byte and two-byte cmpxchg() support on sparc32, parisc,
and csky
This provides native one-byte and two-byte cmpxchg() support for
sparc32 and parisc, courtesy of Al Viro. This support is provided by
the same hashed-array-of-locks technique used for the other atomic
operations provided for these two platforms.
There is also emulated one-byte cmpxchg() support for csky using a new
cmpxchg_emu_u8() function that uses a four-byte cmpxchg() to emulate
the one-byte variant.
Similar patches for emulation of one-byte cmpxchg() for arc, sh, and
xtensa have not yet received maintainer acks, so they are slated for
the v6.11 merge window"
* tag 'cmpxchg.2024.05.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
csky: Emulate one-byte cmpxchg
lib: Add one-byte emulation function
parisc: add u16 support to cmpxchg()
parisc: add missing export of __cmpxchg_u8()
parisc: unify implementations of __cmpxchg_u{8,32,64}
parisc: __cmpxchg_u32(): lift conversion into the callers
sparc32: add __cmpxchg_u{8,16}() and teach __cmpxchg() to handle those sizes
sparc32: unify __cmpxchg_u{32,64}
sparc32: make the first argument of __cmpxchg_u64() volatile u64 *
sparc32: make __cmpxchg_u32() return u32
|
|
Pull RCU updates from Uladzislau Rezki:
- Fix a lockdep complain for lazy-preemptible kernel, remove redundant
BH disable for TINY_RCU, remove redundant READ_ONCE() in tree.c, fix
false positives KCSAN splat and fix buffer overflow in the
print_cpu_stall_info().
- Misc updates related to bpf, tracing and update the MAINTAINERS file.
- An improvement of a normal synchronize_rcu() call in terms of
latency. It maintains a separate track for sync. users only. This
approach bypasses per-cpu nocb-lists thus sync-users do not depend on
nocb-list length and how fast regular callbacks are processed.
- RCU tasks: switch tasks RCU grace periods to sleep at TASK_IDLE
priority, fix some comments, add some diagnostic warning to the
exit_tasks_rcu_start() and fix a buffer overflow in the
show_rcu_tasks_trace_gp_kthread().
- RCU torture: Increase memory to guest OS, fix a Tasks Rude RCU
testing, some updates for TREE09, dump mode information to debug GP
kthread state, remove redundant READ_ONCE(), fix some comments about
RCU_TORTURE_PIPE_LEN and pipe_count, remove some redundant pointer
initialization, fix a hung splat task by when the rcutorture tests
start to exit, fix invalid context warning, add '--do-kvfree'
parameter to torture test and use slow register unregister callbacks
only for rcutype test.
* tag 'rcu.next.v6.10' of https://github.com/urezki/linux: (48 commits)
rcutorture: Use rcu_gp_slow_register/unregister() only for rcutype test
torture: Scale --do-kvfree test time
rcutorture: Fix invalid context warning when enable srcu barrier testing
rcutorture: Make stall-tasks directly exit when rcutorture tests end
rcutorture: Removing redundant function pointer initialization
rcutorture: Make rcutorture support print rcu-tasks gp state
rcutorture: Use the gp_kthread_dbg operation specified by cur_ops
rcutorture: Re-use value stored to ->rtort_pipe_count instead of re-reading
rcutorture: Fix rcu_torture_one_read() pipe_count overflow comment
rcutorture: Remove extraneous rcu_torture_pipe_update_one() READ_ONCE()
rcu: Allocate WQ with WQ_MEM_RECLAIM bit set
rcu: Support direct wake-up of synchronize_rcu() users
rcu: Add a trace event for synchronize_rcu_normal()
rcu: Reduce synchronize_rcu() latency
rcu: Fix buffer overflow in print_cpu_stall_info()
rcu: Mollify sparse with RCU guard
rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow
rcu-tasks: Fix the comments for tasks_rcu_exit_srcu_stall_timer
rcu-tasks: Replace exit_tasks_rcu_start() initialization with WARN_ON_ONCE()
rcu: Remove redundant CONFIG_PROVE_RCU #if condition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull alpha updates from Arnd Bergmann:
"I had investigated dropping support for alpha EV5 and earlier a while
ago after noticing that this is the only supported CPU family in the
kernel without native byte access and that Debian has already dropped
support for this generation last year [1] in order to improve
performance for the newer machines.
This topic came up again when Paul McKenney noticed that parts of the
RCU code already rely on byte access and do not work on alpha EV5
reliably, so we decided on using my series to avoid the problem
entirely.
Al Viro did another series for alpha to address all the known build
issues. I rebased his patches without any further changes and included
it as a baseline for my work here to avoid conflicts and allow
backporting the fixes to stable kernels for the now removed hardware
support as well"
[ I dearly loved alpha back in the days, but the lack of byte and word
operations was a horrible mistake and made everything worse -
including very much the crazy IO contortions that resulted from it.
It certainly wasn't the only mistake in the architecture, but it's the
first-order issue.
So while it's a bit sad to see the support for my first alpha go away,
if you want to run museum hardware, maybe you should use museum
kernels.. - Linus ]
* tag 'asm-generic-alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
alpha: drop pre-EV56 support
alpha: cabriolet: remove EV5 CPU support
alpha: remove LCA and APECS based machines
alpha: sable: remove early machine support
alpha: remove DECpc AXP150 (Jensen) support
alpha: trim the unused stuff from asm-offsets.c
alpha: jensen, t2 - make __EXTERN_INLINE same as for the rest
alpha: core_lca: take the unused functions out
alpha: missing includes
alpha: sys_sio: fix misspelled ifdefs
alpha: don't make functions public without a reason
alpha: add clone3() support
alpha: fix modversions for strcpy() et.al.
alpha: sort scr_mem{cpy,move}w() out
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"Most of the changes enable additional device driver modules and arm64
platforms. In addition, the usb onboard-device support and ext4
security labels are turned on"
* tag 'soc-defconfig-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (23 commits)
arm64: defconfig: enable Airoha platform
arm64: defconfig: enable Khadas TS050 panel as module
arm64: defconfig: select INTERCONNECT_QCOM_SM6115 as built-in
arm64: defconfig: Enable Tegra Security Engine
arm64: defconfig: enable REGULATOR_QCOM_USB_VBUS
ARM: imx_v6_v7_defconfig: Update ONBOARD_USB_HUB to ONBOAD_USB_DEV
arm64: defconfig: enable ext4 security labels
arm64: defconfig: qcom: enable X1E80100 sound card
ARM: configs: sunxi: Enable DRM_DW_HDMI
arm64: defconfig: build snd_bcm2835 as module
arm64: defconfig: enable Rockchip Samsung USBDP PHY
ARM: shmobile: defconfig: Refresh for v6.9-rc1
arm64: defconfig: build ath12k as a module
arm64: defconfig: Enable sc7280 display and gpu clock controllers
ARM: imx_v6_v7_defconfig: Select CONFIG_USB_ONBOARD_HUB
arm64: defconfig: Enable DRM_IMX8MP_DW_HDMI_BRIDGE as module
arm64: defconfig: support Mali CSF-based GPUs
arm64: defconfig: enable Rockchip RK3308 internal audio codec driver
arm64: defconfig: Enable R9A09G057 SoC
arm64: defconfig: Enable Renesas DA9062 PMIC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC code changes from Arnd Bergmann:
"The code changes are fairly minimal, there is a bit of conversion of
the old orion5x platform to modern gpio descriptors, the Kconfig entry
for the added EN7581 platform and a sysfs change for the i.MX PMU
device"
* tag 'soc-arm-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: add Airoha EN7581 platform
ARM: orion5x: Convert TS409 board to GPIO descriptors for LEDs
ARM: orion5x: Convert Net2big board to GPIO descriptors for LEDs
ARM: orion5x: Convert MV2120 board to GPIO descriptors for LEDs
ARM: orion5x: Convert DNS323 board to GPIO descriptors for LEDs
ARM: orion5x: Convert D2Net board to GPIO descriptors for LEDs
ARM: imx: Assign parents for mmdc event_source devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.
Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console and a
few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"
* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Store AP Query Configuration Information in a static buffer
- Rework the AP initialization and add missing cleanups to the error
path
- Swap IRQ and AP bus/device registration to avoid race conditions
- Export prot_virt_guest symbol
- Introduce AP configuration changes notifier interface to facilitate
modularization of the AP bus
- Add CONFIG_AP kernel configuration option to allow modularization of
the AP bus
- Rework CONFIG_ZCRYPT_DEBUG kernel configuration option description
and dependency and rename it to CONFIG_AP_DEBUG
- Convert sprintf() and snprintf() to sysfs_emit() in CIO code
- Adjust indentation of RELOCS command build step
- Make crypto performance counters upward compatible
- Convert make_page_secure() and gmap_make_secure() to use folio
- Rework channel-utilization-block (CUB) handling in preparation of
introducing additional CUBs
- Use attribute groups to simplify registration, removal and extension
of measurement-related channel-path sysfs attributes
- Add a per-channel-path binary "ext_measurement" sysfs attribute that
provides access to extended channel-path measurement data
- Export measurement data for all channel-measurement-groups (CMG), not
only for a specific ones. This enables support of new CMG data
formats in userspace without the need for kernel changes
- Add a per-channel-path sysfs attribute "speed_bps" that provides the
operating speed in bits per second or 0 if the operating speed is not
available
- The CIO tracepoint subchannel-type field "st" is incorrectly set to
the value of subchannel-enabled SCHIB "ena" field. Fix that
- Do not forcefully limit vmemmap starting address to MAX_PHYSMEM_BITS
- Consider the maximum physical address available to a DCSS segment
(512GB) when memory layout is set up
- Simplify the virtual memory layout setup by reducing the size of
identity mapping vs vmemmap overlap
- Swap vmalloc and Lowcore/Real Memory Copy areas in virtual memory.
This will allow to place the kernel image next to kernel modules
- Move everyting KASLR related from <asm/setup.h> to <asm/page.h>
- Put virtual memory layout information into a structure to improve
code generation
- Currently __kaslr_offset is the kernel offset in both physical and
virtual memory spaces. Uncouple these offsets to allow uncoupling of
the addresses spaces
- Currently the identity mapping base address is implicit and is always
set to zero. Make it explicit by putting into __identity_base
persistent boot variable and use it in proper context
- Introduce .amode31 section start and end macros AMODE31_START and
AMODE31_END
- Introduce OS_INFO entries that do not reference any data in memory,
but rather provide only values
- Store virtual memory layout in OS_INFO. It is read out by
makedumpfile, crash and other tools
- Store virtual memory layout in VMCORE_INFO. It is read out by crash
and other tools when /proc/kcore device is used
- Create additional PT_LOAD ELF program header that covers kernel image
only, so that vmcore tools could locate kernel text and data when
virtual and physical memory spaces are uncoupled
- Uncouple physical and virtual address spaces
- Map kernel at fixed location when KASLR mode is disabled. The
location is defined by CONFIG_KERNEL_IMAGE_BASE kernel configuration
value.
- Rework deployment of kernel image for both compressed and
uncompressed variants as defined by CONFIG_KERNEL_UNCOMPRESSED kernel
configuration value
- Move .vmlinux.relocs section in front of the compressed kernel. The
interim section rescue step is avoided as result
- Correct modules thunk offset calculation when branch target is more
than 2GB away
- Kernel modules contain their own set of expoline thunks. Now that the
kernel modules area is less than 4GB away from kernel expoline
thunks, make modules use kernel expolines. Also make EXPOLINE_EXTERN
the default if the compiler supports it
- userfaultfd can insert shared zeropages into processes running VMs,
but that is not allowed for s390. Fallback to allocating a fresh
zeroed anonymous folio and insert that instead
- Re-enable shared zeropages for non-PV and non-skeys KVM guests
- Rename hex2bitmap() to ap_hex2bitmap() and export it for external use
- Add ap_config sysfs attribute to provide the means for setting or
displaying adapters, domains and control domains assigned to a
vfio-ap mediated device in a single operation
- Make vfio_ap_mdev_link_queue() ignore duplicate link requests
- Add write support to ap_config sysfs attribute to allow atomic update
a vfio-ap mediated device state
- Document ap_config sysfs attribute
- Function os_info_old_init() is expected to be called only from a
regular kdump kernel. Enable it to be called from a stand-alone dump
kernel
- Address gcc -Warray-bounds warning and fix array size in struct
os_info
- s390 does not support SMBIOS, so drop unneeded CONFIG_DMI checks
- Use unwinder instead of __builtin_return_address() with ftrace to
prevent returning of undefined values
- Sections .hash and .gnu.hash are only created when CONFIG_PIE_BUILD
kernel is enabled. Drop these for the case CONFIG_PIE_BUILD is
disabled
- Compile kernel with -fPIC and link with -no-pie to allow kpatch
feature always succeed and drop the whole CONFIG_PIE_BUILD
option-enabled code
- Add missing virt_to_phys() converter for VSIE facility and crypto
control blocks
* tag 's390-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
Revert "s390: Relocate vmlinux ELF data to virtual address space"
KVM: s390: vsie: Use virt_to_phys for crypto control block
s390: Relocate vmlinux ELF data to virtual address space
s390: Compile kernel with -fPIC and link with -no-pie
s390: vmlinux.lds.S: Drop .hash and .gnu.hash for !CONFIG_PIE_BUILD
s390/ftrace: Use unwinder instead of __builtin_return_address()
s390/pci: Drop unneeded reference to CONFIG_DMI
s390/os_info: Fix array size in struct os_info
s390/os_info: Initialize old os_info in standalone dump kernel
docs: Update s390 vfio-ap doc for ap_config sysfs attribute
s390/vfio-ap: Add write support to sysfs attr ap_config
s390/vfio-ap: Ignore duplicate link requests in vfio_ap_mdev_link_queue
s390/vfio-ap: Add sysfs attr, ap_config, to export mdev state
s390/ap: Externalize AP bus specific bitmap reading function
s390/mm: Re-enable the shared zeropage for !PV and !skeys KVM guests
mm/userfaultfd: Do not place zeropages when zeropages are disallowed
s390/expoline: Make modules use kernel expolines
s390/nospec: Correct modules thunk offset calculation
s390/boot: Do not rescue .vmlinux.relocs section
s390/boot: Rework deployment of the kernel image
...
|
|
After the patch to restrict the use of mmap() to CAP_SYS_RAWIO for
the currently existing devices, most applications can no longer make
use of the accelerators as in production "you don't run things as root".
To keep the DSA and IAA accelerators usable, hook up a write() method
so that applications can still submit work. In the write method,
sufficient input validation is performed to avoid the security issue
that required the mmap CAP_SYS_RAWIO check.
One complication is that the DSA device allows for indirect ("batched")
descriptors. There is no reasonable way to do the input validation
on these indirect descriptors so the write() method will not allow these
to be submitted to the hardware on affected hardware, and the sysfs
enumeration of support for the opcode is also removed.
Early performance data shows that the performance delta for most common
cases is within the noise.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
|
|
On Sapphire Rapids and related platforms, the DSA and IAA devices have an
erratum that causes direct access (for example, by using the ENQCMD or
MOVDIR64 instructions) from untrusted applications to be a security problem.
To solve this, add a flag to the PCI device enumeration and device structures
to indicate the presence/absence of this security exposure. In the mmap()
method of the device, this flag is then used to enforce that the user
has the CAP_SYS_RAWIO capability.
In a future patch, a write() based method will be added that allows untrusted
applications submit work to the accelerator, where the kernel can do
sanity checking on the user input to ensure secure operation of the accelerator.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
|
|
Due to an erratum with the SPR_DSA and SPR_IAX devices, it is not secure to assign
these devices to virtual machines. Add the PCI IDs of these devices to the VFIO
denylist to ensure that this is handled appropriately by the VFIO subsystem.
The SPR_DSA and SPR_IAX devices are on-SOC devices for the Sapphire Rapids
(and related) family of products that perform data movement and compression.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
|
|
arch/sh/kernel/setup.c:244:12: warning: no previous prototype for 'sh_fdt_init' [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/7e3ea09e706a075bceb6bfd172990676e79be1c2.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/kernel/smp.c:326:5: warning: no previous prototype for 'setup_profiling_timer' [-Wmissing-prototypes]
The function is unconditionally defined in smp.c, but conditionally
declared in <linux/profile.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/effa5eecbd2389c6661974e91bb834db210989ea.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
arch/sh/boards/of-generic.c:146:20: warning: no previous prototype for 'arch_init_clk_ops' [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/942621553ed82e3331e2e91485b643892d2d08bc.1715606232.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
The G2-to-PCI bridge chip found in SEGA Dreamcast assumes P2 area
relative addresses.
Set the appropriate IOPORT base offset.
Tested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240511191614.68561-2-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull Kselftest fixes from Mickaël Salaün:
"Fix Kselftest's vfork() side effects.
As reported by Kernel Test Robot and Sean Christopherson, some
tests fail since v6.9-rc1 . This is due to the use of vfork() which
introduced some side effects. Similarly, while making it more generic,
a previous commit made some Landlock file system tests flaky, and
subject to the host's file system mount configuration.
This fixes all these side effects by replacing vfork() with clone3()
and CLONE_VFORK, which is cleaner (no arbitrary shared memory) and
makes the Kselftest framework more robust"
Link: https://lore.kernel.org/oe-lkp/202403291015.1fcfa957-oliver.sang@intel.com
Link: https://lore.kernel.org/r/ZjPelW6-AbtYvslu@google.com
Link: https://lore.kernel.org/r/20240511171445.904356-1-mic@digikod.net
* tag 'kselftest-fix-vfork-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/harness: Handle TEST_F()'s explicit exit codes
selftests/harness: Fix vfork() side effects
selftests/harness: Share _metadata between forked processes
selftests/pidfd: Fix wrong expectation
selftests/harness: Constify fixture variants
selftests/landlock: Do not allocate memory in fixture data
selftests/harness: Fix interleaved scheduling leading to race conditions
selftests/harness: Fix fixture teardown
selftests/landlock: Fix FS tests when run on a private mount point
selftests/pidfd: Fix config for pidfd_setns_test
|
|
Pull kvm fix from Paolo Bonzini:
- Fix NULL pointer read on s390 in ioctl(KVM_CHECK_EXTENSION) for
/dev/kvm
* tag 'for-linus-6.9' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: s390: Check kvm pointer when testing KVM_CAP_S390_HPAGE_1M
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Fix a race condition when clearing error count bits and toggling the
error interrupt throug the same register, in synopsys_edac
* tag 'edac_urgent_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/synopsys: Fix ECC status and IRQ control race condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new PCI ID which belongs to a new AMD CPU family 0x1a
- Ensure that that last level cache ID is set in all cases, in the AMD
CPU topology parsing code, in order to prevent invalid scheduling
domain CPU masks
* tag 'x86_urgent_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/amd: Ensure that LLC ID is initialized
x86/amd_nb: Add new PCI IDs for AMD family 0x1a
|
|
If TEST_F() explicitly calls exit(code) with code different than 0, then
_metadata->exit_code is set to this code (e.g. KVM_ONE_VCPU_TEST()). We
need to keep in mind that _metadata->exit_code can be KSFT_SKIP while
the process exit code is 0.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Reported-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Closes: https://lore.kernel.org/r/ZjPelW6-AbtYvslu@google.com
Fixes: 0710a1a73fb4 ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Link: https://lore.kernel.org/r/20240511171445.904356-11-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Setting the time namespace with CLONE_NEWTIME returns -EUSERS if the
calling thread shares memory with another thread (because of the shared
vDSO), which is the case when it is created with vfork().
Fix pidfd_setns_test by replacing test harness's vfork() call with a
clone3() call with CLONE_VFORK, and an explicit sharing of the
_metadata and self objects.
Replace _metadata->teardown_parent with a new FIXTURE_TEARDOWN_PARENT()
helper that can replace FIXTURE_TEARDOWN(). This is a cleaner approach
and it enables to selectively share the fixture data between the child
process running tests and the parent process running the fixture
teardown. This also avoids updating several tests to not rely on the
self object's copy-on-write property (e.g. storing the returned value of
a fork() call).
Cc: Christian Brauner <brauner@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Günther Noack <gnoack@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403291015.1fcfa957-oliver.sang@intel.com
Fixes: 0710a1a73fb4 ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-10-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Unconditionally share _metadata between all forked processes, which
enables to actually catch errors which were previously ignored.
This is required for a following commit replacing vfork() with clone3()
and CLONE_VFORK (i.e. not sharing the full memory) . It should also be
useful to share _metadata to extend expectations to test process's
forks. For instance, this change identified a wrong expectation in
pidfd_setns_test.
Because this _metadata is used by the new XFAIL_ADD(), use a global
pointer initialized in TEST_F(). This is OK because only XFAIL_ADD()
use it, and XFAIL_ADD() already depends on TEST_F().
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Will Drewry <wad@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-9-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Replace a wrong EXPECT_GT(self->child_pid_exited, 0) with EXPECT_GE(),
which will be actually tested on the parent and child sides with a
following commit.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20240511171445.904356-8-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
FIXTURE_VARIANT_ADD() types are passed as const pointers to
FIXTURE_TEARDOWN(). Make that explicit by constifying the variants
declarations.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Will Drewry <wad@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-7-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Do not allocate self->dir_path in the test process because this would
not be visible in the FIXTURE_TEARDOWN() process when relying on
fork()/clone3() instead of vfork().
This change is required for a following commit removing vfork() call to
not break the layout3_fs.* test cases.
Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-6-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Fix a race condition when running several FIXTURE_TEARDOWN() managing
the same resource. This fixes a race condition in the Landlock file
system tests when creating or unmounting the same directory.
Using clone3() with CLONE_VFORK guarantees that the child and grandchild
test processes are sequentially scheduled. This is implemented with a
new clone3_vfork() helper replacing the fork() call.
This avoids triggering this error in __wait_for_test():
Test ended in some other way [127]
Cc: Christian Brauner <brauner@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Günther Noack <gnoack@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Fixes: 41cca0542d7c ("selftests/harness: Fix TEST_F()'s vfork handling")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-5-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Make sure fixture teardowns are run when test cases failed, including
when _metadata->teardown_parent is set to true.
Make sure only one fixture teardown is run per test case, handling the
case where the test child forks.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Shengyu Li <shengyu.li.evgeny@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Fixes: 72d7cb5c190b ("selftests/harness: Prevent infinite loop due to Assert in FIXTURE_TEARDOWN")
Fixes: 0710a1a73fb4 ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-4-mic@digikod.net
Rule: add
Link: https://lore.kernel.org/stable/20240506165518.474504-4-mic%40digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
According to the test environment, the mount point of the test's working
directory may be shared or not, which changes the visibility of the
nested "tmp" mount point for the test's parent process calling
umount("tmp").
This was spotted while running tests in containers [1], where mount
points are private.
Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://github.com/landlock-lsm/landlock-test-tools/pull/4 [1]
Fixes: 41cca0542d7c ("selftests/harness: Fix TEST_F()'s vfork handling")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240511171445.904356-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Required by switch_timens() to open /proc/self/ns/time_for_children.
CONFIG_GENERIC_VDSO_TIME_NS is not available on UML, so pidfd_setns_test
cannot be run successfully on this architecture.
Cc: Shuah Khan <skhan@linuxfoundation.org>
Fixes: 2b40c5db73e2 ("selftests/pidfd: add pidfd setns tests")
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20240511171445.904356-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
|
Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on csky.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Drop two-byte support per Arnd Bergmann feedback. ]
Co-developed-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-csky@vger.kernel.org>
|
|
Merge ACPICA material for v6.10. This is mostly new material included
in the 20240322 upstream ACPICA release.
- Disable -Wstringop-truncation for some ACPICA code in the kernel to
avoid a compiler warning that is not very useful (Arnd Bergmann).
- Add EINJ CXL error types to actbl1.h (Ben Cheatham).
- Add support for RAS2 table to ACPICA (Shiju Jose).
- Fix various spelling mistakes in text files and code comments in
ACPICA (Colin Ian King).
- Fix spelling and typos in ACPICA (Saket Dumbre).
- Modify ACPI_OBJECT_COMMON_HEADER (lijun).
- Add RISC-V RINTC affinity structure support to ACPICA (Haibo Xu).
- Fix CXL 3.0 structure (RDPAS) in the CEDT table (Hojin Nam).
- Add missin increment of registered GPE count to ACPICA (Daniil
Tatianin).
- Mark new ACPICA release 20240322 (Saket Dumbre).
- Add support for the AEST V2 table to ACPICA (Ruidong Tian).
* acpica:
ACPICA: AEST: Add support for the AEST V2 table
ACPICA: Update acpixf.h for new ACPICA release 20240322
ACPICA: events/evgpeinit: don't forget to increment registered GPE count
ACPICA: Fix CXL 3.0 structure (RDPAS) in the CEDT table
ACPICA: SRAT: Add dump and compiler support for RINTC affinity structure
ACPICA: SRAT: Add RISC-V RINTC affinity structure
ACPICA: Modify ACPI_OBJECT_COMMON_HEADER
ACPICA: Fix spelling and typos
ACPICA: Clean up the fix for Issue #900
ACPICA: Fix various spelling mistakes in text files and code comments
ACPICA: Attempt 1 to fix issue #900
ACPICA: ACPI 6.5: RAS2: Add support for RAS2 table
ACPICA: actbl1.h: Add EINJ CXL error types
ACPI: disable -Wstringop-truncation
|
|
Pull drm fixes from Dave Airlie:
"This should be the last set of fixes for 6.9, i915, xe and amdgpu are
the bulk here, one of the previous nouveau fixes turned up an issue,
so reverting it, otherwise one core and a couple of meson fixes.
core:
- fix connector debugging output
i915:
- Automate CCS Mode setting during engine resets
- Fix audio time stamp programming for DP
- Fix parsing backlight BDB data
xe:
- Fix use zero-length element array
- Move more from system wq to ordered private wq
- Do not ignore return for drmm_mutex_init
amdgpu:
- DCN 3.5 fix
- MST DSC fixes
- S0i3 fix
- S4 fix
- HDP MMIO mapping fix
- Fix a regression in visible vram handling
amdkfd:
- Spatial partition fix
meson:
- dw-hdmi: power-up fixes
- dw-hdmi: add badngap setting for g12
nouveau:
- revert SG_DEBUG fix that has a side effect"
* tag 'drm-fixes-2024-05-11' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/nouveau/firmware: Fix SG_DEBUG error with nvkm_firmware_ctor()"
drm/amdgpu: Fix comparison in amdgpu_res_cpu_visible
drm/amdkfd: don't allow mapping the MMIO HDP page with large pages
drm/xe: Use ordered WQ for G2H handler
drm/xe/guc: Check error code when initializing the CT mutex
drm/xe/ads: Use flexible-array
Revert "drm/amdkfd: Add partition id field to location_id"
dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users
drm/amd/display: MST DSC check for older devices
drm/amd/display: Fix idle optimization checks for multi-display and dual eDP
drm/amd/display: Fix DSC-re-computing
drm/amd/display: Enable urgent latency adjustments for DCN35
drm/connector: Add \n to message about demoting connector force-probes
drm/i915/bios: Fix parsing backlight BDB data
drm/i915/audio: Fix audio time stamp programming for DP
drm/i915/gt: Automate CCS Mode setting during engine resets
drm/meson: dw-hdmi: add bandgap setting for g12
drm/meson: dw-hdmi: power up phy on device init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"18 hotfixes, 7 of which are cc:stable.
More fixups for this cycle's page_owner updates. And a few userfaultfd
fixes. Otherwise, random singletons - see the individual changelogs
for details"
* tag 'mm-hotfixes-stable-2024-05-10-13-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Barry Song
selftests/mm: fix powerpc ARCH check
mailmap: add entry for John Garry
XArray: set the marks correctly when splitting an entry
selftests/vDSO: fix runtime errors on LoongArch
selftests/vDSO: fix building errors on LoongArch
mm,page_owner: don't remove __GFP_NOLOCKDEP in add_stack_record_to_list
fs/proc/task_mmu: fix uffd-wp confusion in pagemap_scan_pmd_entry()
fs/proc/task_mmu: fix loss of young/dirty bits during pagemap scan
mm/vmalloc: fix return value of vb_alloc if size is 0
mm: use memalloc_nofs_save() in page_cache_ra_order()
kmsan: compiler_types: declare __no_sanitize_or_inline
lib/test_xarray.c: fix error assumptions on check_xa_multi_store_adv_add()
tools: fix userspace compilation with new test_xarray changes
MAINTAINERS: update URL's for KEYS/KEYRINGS_INTEGRITY and TPM DEVICE DRIVER
mm: page_owner: fix wrong information in dump_page_owner
maple_tree: fix mas_empty_area_rev() null pointer dereference
mm/userfaultfd: reset ptes when close() for wr-protected ones
|
|
This reverts commit 52a6947bf576b97ff8e14bb0a31c5eaf2d0d96e2.
This causes loading failures in
[ 0.367379] nouveau 0000:01:00.0: NVIDIA GP104 (134000a1)
[ 0.474499] nouveau 0000:01:00.0: bios: version 86.04.50.80.13
[ 0.474620] nouveau 0000:01:00.0: pmu: firmware unavailable
[ 0.474977] nouveau 0000:01:00.0: fb: 8192 MiB GDDR5
[ 0.484371] nouveau 0000:01:00.0: sec2(acr): mbox 00000001 00000000
[ 0.484377] nouveau 0000:01:00.0: sec2(acr):load: boot failed: -5
[ 0.484379] nouveau 0000:01:00.0: acr: init failed, -5
[ 0.484466] nouveau 0000:01:00.0: init failed with -5
[ 0.484468] nouveau: DRM-master:00000000:00000080: init failed with -5
[ 0.484470] nouveau 0000:01:00.0: DRM-master: Device allocation failed: -5
[ 0.485078] nouveau 0000:01:00.0: probe with driver nouveau failed with error -50
I tried tracking it down but ran out of time this week, will revisit next week.
Reported-by: Dan Moulding <dan@danm.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
core:
- fix connector debugging output
meson:
- dw-hdmi: power-up fixes
- dw-hdmi: add badngap setting for g12
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510072027.GA9131@linux.fritz.box
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Some last-minute fixes for this release from the GPIO subsystem.
The first two address a regression in performance reported to me after
the conversion to using SRCU in GPIOLIB that was merged during the
v6.9 merge window. The second patch is not technically a fix but since
after the first one we no longer need to use a per-descriptor SRCU
struct, I think it's worth to simplify the code before it gets
released on Sunday.
The next two commits fix two memory issues: one use-after-free bug and
one instance of possibly leaking kernel stack memory to user-space.
Summary:
- fix a performance regression in GPIO requesting and releasing after
the conversion to SRCU
- fix a use-after-free bug due to a race-condition
- fix leaking stack memory to user-space in a GPIO uABI corner case"
* tag 'gpio-fixes-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: fix uninitialised kfifo
gpiolib: cdev: Fix use after free in lineinfo_changed_notify
gpiolib: use a single SRCU struct for all GPIO descriptors
gpiolib: fix the speed of descriptor label setting with SRCU
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.9-2024-05-10:
amdgpu:
- DCN 3.5 fix
- MST DSC fixes
- S0i3 fix
- S4 fix
- HDP MMIO mapping fix
- Fix a regression in visible vram handling
amdkfd:
- Spatial partition fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510171110.1394940-1-alexander.deucher@amd.com
|
|
Include a .mailmap entry to synchronize with both my past and current
emails. Among them, three business mailboxes are dead.
Link: https://lkml.kernel.org/r/20240506042009.10854-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
the logic to detect the machine architecture in the Makefile was changed
to use ARCH, and only fallback to uname -m if ARCH is unset. However the
tests of ARCH were not updated to account for the fact that ARCH is
"powerpc" for powerpc builds, not "ppc64".
Fix it by changing the checks to look for "powerpc", and change the
uname -m logic to convert "ppc64.*" into "powerpc".
With that fixed the following tests now build for powerpc again:
* protection_keys
* va_high_addr_switch
* virtual_address_range
* write_to_hugetlbfs
Link: https://lkml.kernel.org/r/20240506115825.66415-1-mpe@ellerman.id.au
Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> [6.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Merge updates of Intel thermal drivers for v6.10:
- Add missing MODULE_DESCRIPTION() to multiple files in the
int340x_thermal and intel_soc_dts_iosf drivers (Srinivas Pandruvada).
- Adjust the update delay and capabilities-per-event values in the
Intel HFI thermal driver to prevent it from missing events and allow
it to process more data in one go (Ricardo Neri).
* thermal-intel:
thermal: intel: hfi: Increase the number of CPU capabilities per netlink event
thermal: intel: hfi: Rename HFI_MAX_THERM_NOTIFY_COUNT
thermal: intel: hfi: Shorten the thermal netlink event delay to 100ms
thermal: intel: hfi: Rename HFI_UPDATE_INTERVAL
thermal: intel: Add missing module description
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- nvme target fixes (Sagi, Dan, Maurizo)
- new vendor quirk for broken MSI (Sean)
- Virtual boundary fix for a regression in this merge window (Ming)
* tag 'block-6.9-20240510' of git://git.kernel.dk/linux:
nvmet-rdma: fix possible bad dereference when freeing rsps
nvmet: prevent sprintf() overflow in nvmet_subsys_nsid_exists()
nvmet: make nvmet_wq unbound
nvmet-auth: return the error code to the nvmet_auth_ctrl_hash() callers
nvme-pci: Add quirk for broken MSIs
block: set default max segment size in case of virt_boundary
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Two device specific fixes here, one avoiding glitches on chip select
with the STM32 driver and one for incorrectly configured clocks on the
Microchip QSPI controller"
* tag 'spi-fix-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core-qspi: fix setting spi bus clock rate
spi: stm32: enable controller before asserting CS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two fixes here, one from Johan which fixes error handling when we
attempt to create duplicate debugfs files and one for an incorrect
specification of ramp_delay with the rtq2208"
* tag 'regulator-fix-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: fix debugfs creation regression
regulator: rtq2208: Fix the BUCK ramp_delay range to maximum of 16mVstep/us
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix possible (but unlikely) out-of-bounds access in the timer
migration per-CPU-init code"
* tag 'timers-urgent-2024-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Prevent out of bounds access on failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix offset miscalculation on ARM-SMMU driver
- AMD IOMMU fix for initializing state of untrusted devices
* tag 'iommu-fixes-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Use the correct type in nvidia_smmu_context_fault()
iommu/amd: Enhance def_domain_type to handle untrusted device
|
|
It incorrectly claimed a resource isn't CPU visible if it's located at
the very end of CPU visible VRAM.
Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3343
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-and-Tested-by: Jeremy Day <jsday@noreason.ca>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
|
|
We don't get the right offset in that case. The GPU has
an unused 4K area of the register BAR space into which you can
remap registers. We remap the HDP flush registers into this
space to allow userspace (CPU or GPU) to flush the HDP when it
updates VRAM. However, on systems with >4K pages, we end up
exposing PAGE_SIZE of MMIO space.
Fixes: d8e408a82704 ("drm/amdkfd: Expose HDP registers to user space")
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The original topology evaluation code initialized cpu_data::topo::llc_id
with the die ID initialy and then eventually overwrite it with information
gathered from a CPUID leaf.
The conversion analysis failed to spot that particular detail and omitted
this initial assignment under the assumption that each topology evaluation
path will set it up. That assumption is mostly correct, but turns out to be
wrong in case that the CPUID leaf 0x80000006 does not provide a LLC ID.
In that case, LLC ID is invalid and as a consequence the setup of the
scheduling domain CPU masks is incorrect which subsequently causes the
scheduler core to complain about it during CPU hotplug:
BUG: arch topology borken
the CLS domain not a subset of the MC domain
Cure it by reusing legacy_set_llc() and assigning the die ID if the LLC ID
is invalid after all possible parsers have been tried.
Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser")
Reported-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Link: https://lore.kernel.org/r/PUZPR04MB63168AC442C12627E827368581292@PUZPR04MB6316.apcprd04.prod.outlook.com
|
|
If a line is requested with debounce, and that results in debouncing
in software, and the line is subsequently reconfigured to enable edge
detection then the allocation of the kfifo to contain edge events is
overlooked. This results in events being written to and read from an
uninitialised kfifo. Read events are returned to userspace.
Initialise the kfifo in the case where the software debounce is
already active.
Fixes: 65cff7046406 ("gpiolib: cdev: support setting debounce")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240510065342.36191-1-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Enables the ARCH_AIROHA config by default.
Signed-off-by: Daniel Danzberger <dd@embedd.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/65737ca5506371ef84c3a055e68d280f314e3b41.1709975956.git.lorenzo@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Introduce the Kconfig entry for the Airoha EN7581 multicore architecture
available in the Airoha EN7581 evaluation board.
Signed-off-by: Daniel Danzberger <dd@embedd.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/d52d95db313e6a58ba997ba2181faf78a1014bcc.1709975956.git.lorenzo@kernel.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the new PCI Device IDs to the MISC IDs list to support new
generation of AMD 1Ah family 70h Models of processors.
[ bp: Massage commit message. ]
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240510111829.969501-1-Shyam-sundar.S-k@amd.com
|
|
Support to inject result for NOP so that we can inject failure from
userspace. It is very helpful for covering failure handling code in
io_uring core change.
With nop flags, it becomes possible to add more test features on NOP in
future.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240510035031.78874-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The NOP op flags should have been checked from beginning like any other
opcode, otherwise NOP may not be extended with the op flags.
Given both liburing and Rust io-uring crate always zeros SQE op flags, just
ignore users which play raw NOP uring interface without zeroing SQE, because
NOP is just for test purpose. Then we can save one NOP2 opcode.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Fixes: 2b188cc1bb85 ("Add io_uring IO interface")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240510035031.78874-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clockevent/source updates from Daniel Lezcano:
- Add the R9A09G057 compatible bindings in the DT documentation and
add specific code to deal with the probe routine being called twice
(Geert Uytterhoeven)
- Remove unused field in the struct dmtimer in the TI driver
(Christophe JAILLET)
- Constify the hisi_161010101_oem_info variable in the ARM arch timer
(Stephen Boyd)
Link: https://lore.kernel.org/lkml/7ca1c46a-93e6-4f67-bee3-623cb56764fa@linaro.org
|
|
Set up sysfs for the Atmel SHA204a. Provide the content of the otp zone as
an attribute field on the sysfs entry. Thereby make sure that if the chip
is locked, not connected or trouble with the i2c bus, the sysfs device is
not set up. This is mostly already handled in atmel-i2c.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Provide a read function reading the otp zone. The otp zone can be used for
storing serial numbers. The otp zone, as also data zone, are only
accessible if the chip was locked before. Locking the chip is a post
production customization and has to be done manually i.e. not by this
driver. Without this step the chip is pretty much not usable, where
putting or not putting data into the otp zone is optional.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Make the memory read function name more specific to the read memory zone.
The Atmel SHA204 chips provide config, otp and data zone. The implemented
read function in fact only reads some fields in zone config. The function
renaming allows for a uniform naming scheme when reading from other memory
zones.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add missing description for argument hwrng.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fixes the following two Coccinelle/coccicheck warnings reported by
memdup.cocci:
iaa_crypto_main.c:350:19-26: WARNING opportunity for kmemdup
iaa_crypto_main.c:358:18-25: WARNING opportunity for kmemdup
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
wait_for_completion_killable_timeout()
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_killable_timeout() causing patterns like:
timeout = wait_for_completion_killable_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
iMX8ULP have a secure-enclave hardware IP called EdgeLock Enclave(ELE),
that control access to caam controller's register page, i.e., page0.
At all, if the ELE release access to CAAM controller's register page,
it will release to secure-world only.
Clocks are turned on automatically for iMX8ULP. There exists the caam
clock gating bit, but it is not advised to gate the clock at linux, as
optee-os or any other entity might be using it.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
CAAM clock initializat is done based on the basis of soc specific
info stored in struct caam_imx_data:
- caam-page0-access flag
- num_clks
CAAM driver needs to be aware of access rights to CAAM control page
i.e., page0, to do things differently.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Dma address mapping fails on unaligned scatterlist offset. Use sw
fallback for these cases.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
RSA text data uses variable length buffer allocated in software stack.
Calling kfree on it causes undefined behaviour in subsequent operations.
Cc: <stable@vger.kernel.org> #6.7+
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Skip sw fallback allocation if RSA module failed to get device handle.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Skip dma setup and mapping for AES driver if plaintext is empty.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This isn't modified at runtime. Mark it const so it can move to
read-only data.
Cc: dann frazier <dann.frazier@canonical.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240502233447.420888-1-swboyd@chromium.org
|
|
In "struct dmtimer", the 'rate' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/c9f7579922c587fce334a1aa9651f3189de7a00b.1714513336.git.christophe.jaillet@wanadoo.fr
|
|
The Renesas OS Timer (OSTM) driver contains two probe points, of which
only one should complete:
1. Early probe, using TIMER_OF_DECLARE(), to provide the sole
clocksource on (arm32) RZ/A1 and RZ/A2 SoCs,
2. Normal probe, using a platform driver, to provide additional timers
on (arm64 + riscv) RZ/G2L and similar SoCs.
The latter is needed because using OSTM on RZ/G2L requires manipulation
of its reset signal, which is not yet available at the time of early
probe, causing early probe to fail with -EPROBE_DEFER. It is only
enabled when building a kernel with support for the RZ/G2L family, so it
does not impact RZ/A1 and RZ/A2. Hence only one probe method can
complete on all affected systems.
As relying on the order of initialization of subsystems inside the
kernel is fragile, set the DT node's OF_POPULATED flag after a succesful
early probe. This makes sure the platform driver's probe is never
called after a successful early probe.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviwed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/bd027379713cbaafa21ffe9e848ebb7f475ca0e7.1710930542.git.geert+renesas@glider.be
|
|
The RZ/V2H(P) (R9A09G057) SoC is equipped with the Generic Timer Module,
also known as OSTM. Similar to the RZ/G2L SoC, the OSTM on the RZ/V2H(P)
SoC requires the reset line to be deasserted before accessing any
registers.
Early call to ostm_init() happens through TIMER_OF_DECLARE() which always
fails with -EPROBE_DEFER, as resets are not available that early in the
boot process. To address this issue on the RZ/V2H(P) SoC, enable the OSTM
driver to be reprobed through the platform driver probe mechanism.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240322151219.885832-3-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
Document the General Timer Module (a.k.a OSTM) block on Renesas RZ/V2H(P)
("R9A09G057") SoC, which is identical to the one found on the RZ/A1H and
RZ/G2L SoCs. Add the "renesas,r9a09g057-ostm" compatible string for the
RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240322151219.885832-2-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
This was missed because of the function pointer indirection.
nvidia_smmu_context_fault() is also installed as a irq function, and the
'void *' was changed to a struct arm_smmu_domain. Since the iommu_domain
is embedded at a non-zero offset this causes nvidia_smmu_context_fault()
to miscompute the offset. Fixup the types.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107c9f000
[0000000000000120] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 1 PID: 47 Comm: kworker/u25:0 Not tainted 6.9.0-0.rc7.58.eln136.aarch64 #1
Hardware name: Unknown NVIDIA Jetson Orin NX/NVIDIA Jetson Orin NX, BIOS 3.1-32827747 03/19/2023
Workqueue: events_unbound deferred_probe_work_func
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : nvidia_smmu_context_fault+0x1c/0x158
lr : __free_irq+0x1d4/0x2e8
sp : ffff80008044b6f0
x29: ffff80008044b6f0 x28: ffff000080a60b18 x27: ffffd32b5172e970
x26: 0000000000000000 x25: ffff0000802f5aac x24: ffff0000802f5a30
x23: ffff0000802f5b60 x22: 0000000000000057 x21: 0000000000000000
x20: ffff0000802f5a00 x19: ffff000087d4cd80 x18: ffffffffffffffff
x17: 6234362066666666 x16: 6630303078302d30 x15: ffff00008156d888
x14: 0000000000000000 x13: ffff0000801db910 x12: ffff00008156d6d0
x11: 0000000000000003 x10: ffff0000801db918 x9 : ffffd32b50f94d9c
x8 : 1fffe0001032fda1 x7 : ffff00008197ed00 x6 : 000000000000000f
x5 : 000000000000010e x4 : 000000000000010e x3 : 0000000000000000
x2 : ffffd32b51720cd8 x1 : ffff000087e6f700 x0 : 0000000000000057
Call trace:
nvidia_smmu_context_fault+0x1c/0x158
__free_irq+0x1d4/0x2e8
free_irq+0x3c/0x80
devm_free_irq+0x64/0xa8
arm_smmu_domain_free+0xc4/0x158
iommu_domain_free+0x44/0xa0
iommu_deinit_device+0xd0/0xf8
__iommu_group_remove_device+0xcc/0xe0
iommu_bus_notifier+0x64/0xa8
notifier_call_chain+0x78/0x148
blocking_notifier_call_chain+0x4c/0x90
bus_notify+0x44/0x70
device_del+0x264/0x3e8
pci_remove_bus_device+0x84/0x120
pci_remove_root_bus+0x5c/0xc0
dw_pcie_host_deinit+0x38/0xe0
tegra_pcie_config_rp+0xc0/0x1f0
tegra_pcie_dw_probe+0x34c/0x700
platform_probe+0x70/0xe8
really_probe+0xc8/0x3a0
__driver_probe_device+0x84/0x160
driver_probe_device+0x44/0x130
__device_attach_driver+0xc4/0x170
bus_for_each_drv+0x90/0x100
__device_attach+0xa8/0x1c8
device_initial_probe+0x1c/0x30
bus_probe_device+0xb0/0xc0
deferred_probe_work_func+0xbc/0x120
process_one_work+0x194/0x490
worker_thread+0x284/0x3b0
kthread+0xf4/0x108
ret_from_fork+0x10/0x20
Code: a9b97bfd 910003fd a9025bf5 f85a0035 (b94122a1)
Cc: stable@vger.kernel.org
Fixes: e0976331ad11 ("iommu/arm-smmu: Pass arm_smmu_domain to internal functions")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Closes: https://lore.kernel.org/all/jto5e3ili4auk6sbzpnojdvhppgwuegir7mpd755anfhwcbkfz@2u5gh7bxb4iv
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/0-v1-24ce064de41f+4ac-nvidia_smmu_fault_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Fix the fileserver rotation code in a couple of ways:
(1) op->server_states is an array, not a pointer to a single record, so
fix the places that access it to index it.
(2) In the places that go through an address list to work out which one
has the best priority, fix the loops to skip known failed addresses.
Without this, the rotation algorithm may get stuck on addresses that are
inaccessible or don't respond.
This can be triggered manually by finding a server that advertises a
non-routable address and giving it a higher priority, eg.:
echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs
if the server, say, includes the address 192.168.7.7 in its address list,
and then attempting to access a volume on that server.
Fixes: 495f2ae9e355 ("afs: Fix fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/4005300.1712309731@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/998836.1714746152@warthog.procyon.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add simple selftests for the new F_DUPFD_QUERY fcntl().
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Often userspace needs to know whether two file descriptors refer to the
same struct file. For example, systemd uses this to filter out duplicate
file descriptors in it's file descriptor store (cf. [1]) and vulkan uses
it to compare dma-buf fds (cf. [2]).
The only api we provided for this was kcmp() but that's not generally
available or might be disallowed because it is way more powerful (allows
ordering of file pointers, operates on non-current task) etc. So give
userspace a simple way of comparing two file descriptors for sameness
adding a new fcntl() F_DUDFD_QUERY.
Link: https://github.com/systemd/systemd/blob/a4f0e0da3573a10bc5404142be8799418760b1d1/src/basic/fd-util.c#L517 [1]
Link: https://gitlab.freedesktop.org/wlroots/wlroots/-/blob/master/render/vulkan/texture.c#L490 [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[brauner: commit message]
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix use zero-length element array
- Move more from system wq to ordered private wq
- Do not ignore return for drmm_mutex_init
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3rduifdp5wipkljdpuq4x6uowkc2uyzgdoft4txvp6mgvzjaj@7zw7c6uw4wrf
|
|
https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes
- Automate CCS Mode setting during engine resets (Andi)
- Fix audio time stamp programming for DP (Chaitanya)
- Fix parsing backlight BDB data (Karthikeyan)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZjvTVEmQeVKVB2jx@intel.com
|
|
Stephen Rothwell reports htmldocs warning when merging tpmdd tree for
linux-next:
Documentation/security/tpm/tpm-security.rst: WARNING: document isn't included in any toctree
Add toctree entry for TPM security docs to fix above warning.
Fixes: ddfb3687c538 ("Documentation: add tpm-security.rst")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20240506162105.42ce2ff7@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Update tpm2_load_context() to return -EINVAL on integrity failures and
use this as a signal when loading the NULL context that something
might be wrong. If the signal fails, check the name of the NULL
primary against the one stored in the chip data and if there is a
mismatch disable the TPM because it is likely to have suffered a reset
attack.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Document how the new encrypted secure interface for TPM2 works and how
security can be assured after boot by certifying the NULL seed.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
This is the last component of encrypted tpm2 session handling that
allows us to verify from userspace that the key derived from the NULL
seed genuinely belongs to the TPM and has not been spoofed.
The procedure for doing this involves creating an attestation identity
key (which requires verification of the TPM EK certificate) and then
using that AIK to sign a certification of the Elliptic Curve key over
the NULL seed. Userspace must create this EC Key using the parameters
prescribed in TCG TPM v2.0 Provisioning Guidance for the SRK ECC; if
this is done correctly the names will match and the TPM can then run a
TPM2_Certify operation on this derived primary key using the newly
created AIK.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
If some entity is snooping the TPM bus, the can see the data going in
to be sealed and the data coming out as it is unsealed. Add parameter
and response encryption to these cases to ensure that no secrets are
leaked even if the bus is snooped.
As part of doing this conversion it was discovered that policy
sessions can't work with HMAC protected authority because of missing
pieces (the tpm Nonce). I've added code to work the same way as
before, which will result in potential authority exposure (while still
adding security for the command and the returned blob), and a fixme to
redo the API to get rid of this security hole.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
If some entity is snooping the TPM bus, they can see the random
numbers we're extracting from the TPM and do prediction attacks
against their consumers. Foil this attack by using response
encryption to prevent the attacker from seeing the random sequence.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_pcr_extend() is used by trusted keys to extend a PCR to prevent a
key from being re-loaded until the next reboot. To use this
functionality securely, that extend must be protected by a session
hmac. This patch adds HMAC protection so tampering with the
tpm2_pcr_extend() command in flight is detected.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The final pieces of the HMAC API are for manipulating the session area
of the command. To add an authentication HMAC session
tpm_buf_append_hmac_session() is called where tpm2_append_auth() would
go. If a non empty password is passed in, this is correctly added to
the HMAC to prove knowledge of it without revealing it. Note that if
the session is only used to encrypt or decrypt parameters (no
authentication) then tpm_buf_append_hmac_session_opt() must be used
instead. This functions identically to tpm_buf_append_hmac_session()
when TPM_BUS_SECURITY is enabled, but differently when it isn't,
because effectively nothing is appended to the session area.
Next the parameters should be filled in for the command and finally
tpm_buf_fill_hmac_session() is called immediately prior to transmitting
the command which computes the correct HMAC and places it in the
command at the session location in the tpm buffer
Finally, after tpm_transmit_cmd() is called,
tpm_buf_check_hmac_response() is called to check that the returned
HMAC matched and collect the new state for the next use of the
session, if any.
The features of the session are controlled by the session attributes
set in tpm_buf_append_hmac_session(). If TPM2_SA_CONTINUE_SESSION is
not specified, the session will be flushed and the tpm2_auth structure
freed in tpm_buf_check_hmac_response(); otherwise the session may be
used again. Parameter encryption is specified by or'ing the flag
TPM2_SA_DECRYPT and response encryption by or'ing the flag
TPM2_SA_ENCRYPT. the various encryptions will be taken care of by
tpm_buf_fill_hmac_session() and tpm_buf_check_hmac_response()
respectively.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # crypto API parts
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add tpm2_append_name() for appending to the handle area of the TPM
command. When TPM_BUS_SECURITY is enabled and HMAC sessions are in
use this adds the standard u32 handle to the buffer but additionally
records the name of the object which must be used as part of the HMAC
computation. The name of certain object types (volatile and permanent
handles and NV indexes) is a hash of the public area of the object.
Since this hash is not known ahead of time, it must be requested from
the TPM using TPM2_ReadPublic() (which cannot be HMAC protected, but
if an interposer lies about it, the HMAC check will fail and the
problem will be detected).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # crypto API parts
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add session based HMAC authentication plus parameter decryption and
response encryption using AES. The basic design is to segregate all
the nasty crypto, hash and hmac code into tpm2-sessions.c and export a
usable API. The API first of all starts off by gaining a session with
tpm2_start_auth_session() which initiates a session with the TPM and
allocates an opaque tpm2_auth structure to handle the session
parameters. The design is that session use will be single threaded
from start to finish under the ops lock, so the tpm2_auth structure is
stored in struct tpm2_chip to simpify the externally visible API.
The session can be ended with tpm2_end_auth_session() which is
designed only to be used in error legs. Ordinarily the further
session API (future patches) will end or continue the session
appropriately without having to call this.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # crypto API parts
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The TCG mandates two Key derivation functions called KDFa and KDFe
used to derive keys from seeds and elliptic curve points respectively.
The definitions for these functions are found in the TPM 2.0 Library
Specification Part 1 - Architecture Guide
https://trustedcomputinggroup.org/resource/tpm-library-specification/
Implement a cut down version of each of these functions sufficient to
support the key derivation needs of HMAC sessions.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The session handling code uses a "salted" session, meaning a session
whose salt is encrypted to the public part of another TPM key so an
observer cannot obtain it (and thus deduce the session keys). This
patch creates and context saves in the tpm_chip area the primary key
of the NULL hierarchy for this purpose.
[jarkko@kernel.org: fixed documentation errors]
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The TPM2 session HMAC and encryption handling code needs to save and
restore a single volatile context for the elliptic curve version of
the NULL seed, so export the APIs which do this for internal use.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Replace all instances of &buf.data[TPM_HEADER_SIZE] with a new
function tpm_buf_parameters() because encryption sessions change
where the return parameters are located in the buffer since if a
return session is present they're 4 bytes beyond the header with those
4 bytes giving the parameter length. If there is no return session,
then they're in the usual place immediately after the header.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Implement AES in CFB mode using the existing, mostly constant-time
generic AES library implementation. This will be used by the TPM code
to encrypt communications with TPM hardware, which is often a discrete
component connected using sniffable wires or traces.
While a CFB template does exist, using a skcipher is a major pain for
non-performance critical synchronous crypto where the algorithm is known
at compile time and the data is in contiguous buffers with valid kernel
virtual addresses.
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20230216201410.15010-1-James.Bottomley@HansenPartnership.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Take advantage of the new sized buffer (TPM2B) mode of struct tpm_buf in
tpm2_seal_trusted(). This allows to add robustness to the command
construction without requiring to calculate buffer sizes manually.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Declare reader functions for the instances of struct tpm_buf. If the read
goes out of boundary, TPM_BUF_BOUNDARY_ERROR is set, and subsequent read
will do nothing.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Declare tpm_buf_init_sized() and tpm_buf_reset_sized() for creating TPM2B
formatted buffers. These buffers are also known as sized buffers in the
specifications and literature.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
TPM2B buffers, or sized buffers, have a two byte header, which contains the
length of the payload as a 16-bit big-endian number, without counting in
the space taken by the header. This differs from encoding in the TPM header
where the length includes also the bytes taken by the header.
Unbound the length of a tpm_buf from the value stored to the TPM command
header. A separate encoding and decoding step so that different buffer
types can be supported, with variant header format and length encoding.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Remove deprecated portions and document enum values.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
separate out the tpm_buf_... handling functions from static inlines in
tpm.h and move them to their own tpm-buf.c file. This is a precursor
to adding new functions for other TPM type handling because the amount
of code will grow from the current 70 lines in tpm.h to about 200
lines when the additions are done. 200 lines of inline functions is a
bit too much to keep in a header file.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Open code the last remaining call site for tpm_send().
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The helper function has no call sites. Thus, remove it.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The recent change to handle HAS_IOPORT removed the TPM_INF_IO_PORT
define for the HAS_IOPORT=n case despite the define being used in
sections of code not covered by the same ifdef check. This was missed
because at the moment TCG_INFINEON indirectly depends on HAS_IOPORT via
PNP which depends on ACPI || ISA. As TCG_INFINEON does in principle
support MMIO only use add it for COMPILE_TEST to cover the HAS_IOPORT=n
case.
Link: https://lore.kernel.org/lkml/9d9fa267-067e-421b-9a39-aa178b913298@app.fastmail.com/
Fixes: dab56f80e7f9 ("char: tpm: handle HAS_IOPORT dependencies")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add the ST chip st33ktpm2xi2c to the supported compatible strings of the
TPM TIS I2C schema. The Chip is compliant with the TCG PC Client TPM
Profile specification.
For reference, a datasheet is available at:
https://www.st.com/resource/en/data_brief/st33ktpm2xi2c.pdf
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Based recent discussions on LKML, provide preliminary bits of tpm_tis_core
dependent drivers. Includes only bare essentials but can be extended later
on case by case. This way some people may even want to read it later on.
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Variable ret is being assigned and error code that is never read, it is
either being re-assigned in an error exit path or never referenced again
on the non-error path. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
drivers/char/tpm/eventlog/acpi.c:145:2: warning: Value stored to 'ret'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add this dependency and ifdef sections of
code using inb()/outb() as alternative access methods.
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Similarly to how polling first is supported for receive, it makes sense
to provide the same for accept. An accept operation does a lot of
expensive setup, like allocating an fd, a socket/inode, etc. If no
connection request is already pending, this is wasted and will just be
cleaned up and freed, only to retry via the usual poll trigger.
Add IORING_ACCEPT_POLL_FIRST, which tells accept to only initiate the
accept request if poll says we have something to accept.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This allows the caller to perform a non-blocking attempt, similarly to
how recvmsg has MSG_DONTWAIT. If set, and we get -EAGAIN on a connection
attempt, propagate the result to userspace rather than arm poll and
wait for a retry.
Suggested-by: Norman Maurer <norman_maurer@apple.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.9
- nvme target fixes (Sagi, Dan, Maurizo)
- new vendor quirk for broken MSI (Sean)"
* tag 'nvme-6.9-2024-05-09' of git://git.infradead.org/nvme:
nvmet-rdma: fix possible bad dereference when freeing rsps
nvmet: prevent sprintf() overflow in nvmet_subsys_nsid_exists()
nvmet: make nvmet_wq unbound
nvmet-auth: return the error code to the nvmet_auth_ctrl_hash() callers
nvme-pci: Add quirk for broken MSIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- pmbus/ucd9000: Increase chip access delay to avoid random access
errors
- corsair-cpro: Protect kernel code against parallel hidraw access from
userspace
* tag 'hwmon-for-v6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/ucd9000) Increase delay from 250 to 500us
hwmon: (corsair-cpro) Protect ccp->wait_input_report with a spinlock
hwmon: (corsair-cpro) Use complete_all() instead of complete() in ccp_raw_event()
hwmon: (corsair-cpro) Use a separate buffer for sending commands
|
|
This includes zswpin, zswpout and zswpwb.
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20240502185307.3942173-2-usamaarif642@gmail.com>
|
|
Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.
To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com
Fixes: 8d655e6523764 ("hwmon: (ucd90320) Add minimum delay between bus accesses")
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and IPsec.
The bridge patch is actually a follow-up to a recent fix in the same
area. We have a pending v6.8 AF_UNIX regression; it should be solved
soon, but not in time for this PR.
Current release - regressions:
- eth: ks8851: Queue RX packets in IRQ handler instead of disabling
BHs
- net: bridge: fix corrupted ethernet header on multicast-to-unicast
Current release - new code bugs:
- xfrm: fix possible bad pointer derferencing in error path
Previous releases - regressionis:
- core: fix out-of-bounds access in ops_init
- ipv6:
- fix potential uninit-value access in __ip6_make_skb()
- fib6_rules: avoid possible NULL dereference in fib6_rule_action()
- tcp: use refcount_inc_not_zero() in tcp_twsk_unique().
- rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation
- rxrpc: fix congestion control algorithm
- bluetooth:
- l2cap: fix slab-use-after-free in l2cap_connect()
- msft: fix slab-use-after-free in msft_do_close()
- eth: hns3: fix kernel crash when devlink reload during
initialization
- eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
family
Previous releases - always broken:
- xfrm: preserve vlan tags for transport mode software GRO
- tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
- eth: hns3: keep using user config after hardware reset"
* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
net: hns3: fix kernel crash when devlink reload during initialization
net: hns3: fix port vlan filter not disabled issue
net: hns3: use appropriate barrier function after setting a bit value
net: hns3: release PTP resources if pf initialization failed
net: hns3: change type of numa_node_mask as nodemask_t
net: hns3: direct return when receive a unknown mailbox message
net: hns3: using user configure after hardware reset
net/smc: fix neighbour and rtable leak in smc_ib_find_route()
ipv6: prevent NULL dereference in ip6_output()
hsr: Simplify code for announcing HSR nodes timer setup
ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
rxrpc: Only transmit one ACK per jumbo packet received
rxrpc: Fix congestion control algorithm
selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
ipv6: Fix potential uninit-value access in __ip6_make_skb()
net: phy: marvell-88q2xxx: add support for Rev B1 and B2
appletalk: Improve handling of broadcast packets
...
|
|
Other cgroup policy like bfq, iocost are lazy-initialized when they are
configured for the first time for the device, but blk-throttle is
initialized unconditionally from blkcg_init_disk().
Delay initialization of blk-throttle as well, to save some cpu and
memory overhead if it's not configured.
Noted that once it's initialized, it can't be destroyed until disk
removal, even if it's disabled.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240509121107.3195568-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
One the one hand, it's marked EXPERIMENTAL since 2017, and looks like
there are no users since then, and no testers and no developers, it's
just not active at all.
On the other hand, even if the config is disabled, there are still many
fields in throtl_grp and throtl_data and many functions that are only
used for throtl low.
At last, currently blk-throtl is initialized during disk initialization,
and destroyed during disk removal, and it exposes many functions to be
called directly from block layer.
Remove throtl low to make code much more cleaner and follow up work much
easier.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240509121107.3195568-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull ARM fix from Russell King:
- clear stale KASan stack poison when a CPU resumes
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9381/1: kasan: clear stale stack poison
|
|
regulator_get() may sometimes be called more than once for the same
consumer device, something which before commit dbe954d8f163 ("regulator:
core: Avoid debugfs: Directory ... already present! error") resulted in
errors being logged.
A couple of recent commits broke the handling of such cases so that
attributes are now erroneously created in the debugfs root directory the
second time a regulator is requested and the log is filled with errors
like:
debugfs: File 'uA_load' in directory '/' already present!
debugfs: File 'min_uV' in directory '/' already present!
debugfs: File 'max_uV' in directory '/' already present!
debugfs: File 'constraint_flags' in directory '/' already present!
on any further calls.
Fixes: 2715bb11cfff ("regulator: core: Fix more error checking for debugfs_create_dir()")
Fixes: 08880713ceec ("regulator: core: Streamline debugfs operations")
Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240509133304.8883-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull dentry leak fix from Al Viro:
"Dentry leak fix in the qibfs driver that I forgot to send a pull
request for ;-/
My apologies - it actually sat in vfs.git#fixes for more than two
months..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qibfs: fix dentry leak
|
|
Update the documentation for trusted and encrypted KEYS with DCP as new
trust source:
- Describe security properties of DCP trust source
- Describe key usage
- Document blob format
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Document the kernel parameters trusted.dcp_use_otp_key
and trusted.dcp_skip_zk_test for DCP-backed trusted keys.
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
This covers trusted keys backed by NXP's DCP (Data Co-Processor) chip
found in smaller i.MX SoCs.
Signed-off-by: David Gstir <david@sigma-star.at>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
DCP (Data Co-Processor) is the little brother of NXP's CAAM IP.
Beside of accelerated crypto operations, it also offers support for
hardware-bound keys. Using this feature it is possible to implement a blob
mechanism similar to what CAAM offers. Unlike on CAAM, constructing and
parsing the blob has to happen in software (i.e. the kernel).
The software-based blob format used by DCP trusted keys encrypts
the payload using AES-128-GCM with a freshly generated random key and nonce.
The random key itself is AES-128-ECB encrypted using the DCP unique
or OTP key.
The DCP trusted key blob format is:
/*
* struct dcp_blob_fmt - DCP BLOB format.
*
* @fmt_version: Format version, currently being %1
* @blob_key: Random AES 128 key which is used to encrypt @payload,
* @blob_key itself is encrypted with OTP or UNIQUE device key in
* AES-128-ECB mode by DCP.
* @nonce: Random nonce used for @payload encryption.
* @payload_len: Length of the plain text @payload.
* @payload: The payload itself, encrypted using AES-128-GCM and @blob_key,
* GCM auth tag of size AES_BLOCK_SIZE is attached at the end of it.
*
* The total size of a DCP BLOB is sizeof(struct dcp_blob_fmt) + @payload_len +
* AES_BLOCK_SIZE.
*/
struct dcp_blob_fmt {
__u8 fmt_version;
__u8 blob_key[AES_KEYSIZE_128];
__u8 nonce[AES_KEYSIZE_128];
__le32 payload_len;
__u8 payload[];
} __packed;
By default the unique key is used. It is also possible to use the
OTP key. While the unique key should be unique it is not documented how
this key is derived. Therefore selection the OTP key is supported as
well via the use_otp_key module parameter.
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Enabling trusted keys requires at least one trust source implementation
(currently TPM, TEE or CAAM) to be enabled. Currently, this is
done by checking each trust source's config option individually.
This does not scale when more trust sources like the one for DCP
are added, because the condition will get long and hard to read.
Add config HAVE_TRUSTED_KEYS which is set to true by each trust source
once its enabled and adapt the check for having at least one active trust
source to use this option. Whenever a new trust source is added, it now
needs to select HAVE_TRUSTED_KEYS.
Signed-off-by: David Gstir <david@sigma-star.at>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org> # for TRUSTED_KEYS_TPM
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
DCP (Data Co-Processor) is able to derive private keys for a fused
random seed, which can be referenced by handle but not accessed by
the CPU. Similarly, DCP is able to store arbitrary keys in four
dedicated key slots located in its secure memory area (internal SRAM).
These keys can be used to perform AES encryption.
Expose these derived keys and key slots through the crypto API via their
handle. The main purpose is to add DCP-backed trusted keys. Other
use cases are possible too (see similar existing paes implementations),
but these should carefully be evaluated as e.g. enabling AF_ALG will
give userspace full access to use keys. In scenarios with untrustworthy
userspace, this will enable en-/decryption oracles.
Co-developed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
* for-next/tlbi:
arm64: tlb: Allow range operation for MAX_TLBI_RANGE_PAGES
arm64: tlb: Improve __TLBI_VADDR_RANGE()
arm64: tlb: Fix TLBI RANGE operand
|
|
* for-next/selftests:
kselftest: arm64: Add a null pointer check
kselftest/arm64: Remove unused parameters in abi test
|
|
* for-next/perf: (41 commits)
arm64: Add USER_STACKTRACE support
drivers/perf: hisi: hns3: Actually use devm_add_action_or_reset()
drivers/perf: hisi: hns3: Fix out-of-bound access when valid event group
drivers/perf: hisi_pcie: Fix out-of-bound access when valid event group
perf/arm-spe: Assign parents for event_source device
perf/arm-smmuv3: Assign parents for event_source device
perf/arm-dsu: Assign parents for event_source device
perf/arm-dmc620: Assign parents for event_source device
perf/arm-ccn: Assign parents for event_source device
perf/arm-cci: Assign parents for event_source device
perf/alibaba_uncore: Assign parents for event_source device
perf/arm_pmu: Assign parents for event_source devices
perf/imx_ddr: Assign parents for event_source devices
perf/qcom: Assign parents for event_source devices
Documentation: qcom-pmu: Use /sys/bus/event_source/devices paths
perf/riscv: Assign parents for event_source devices
perf/thunderx2: Assign parents for event_source devices
Documentation: thunderx2-pmu: Use /sys/bus/event_source/devices paths
perf/xgene: Assign parents for event_source devices
Documentation: xgene-pmu: Use /sys/bus/event_source/devices paths
...
|
|
* for-next/mm:
arm64/mm: Fix pud_user_accessible_page() for PGTABLE_LEVELS <= 2
arm64/mm: Add uffd write-protect support
arm64/mm: Move PTE_PRESENT_INVALID to overlay PTE_NG
arm64/mm: Remove PTE_PROT_NONE bit
arm64/mm: generalize PMD_PRESENT_INVALID for all levels
arm64: mm: Don't remap pgtables for allocate vs populate
arm64: mm: Batch dsb and isb when populating pgtables
arm64: mm: Don't remap pgtables per-cont(pte|pmd) block
|
|
* for-next/misc:
arm64: simplify arch_static_branch/_jump function
arm64: Add the arm64.no32bit_el0 command line option
arm64: defer clearing DAIF.D
arm64: assembler: update stale comment for disable_step_tsk
arm64/sysreg: Update PIE permission encodings
arm64: Add Neoverse-V2 part
arm64: Remove unnecessary irqflags alternative.h include
|
|
* for-next/kbuild:
arm64: boot: Support Flat Image Tree
arm64: Add BOOT_TARGETS variable
|
|
* for-next/acpi:
arm64: acpi: Honour firmware_signature field of FACS, if it exists
ACPICA: Detect FACS even for hardware reduced platforms
|
