Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Some driver bugfixes and an old API removal now that all users are
  gone"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: tegra: Synchronize DMA before termination
  i2c: tegra: Better handle case where CPU0 is busy for a long time
  i2c: remove i2c_new_probed_device API
  i2c: altera: use proper variable to hold errno
  i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHT

5 files changed, 38 insertions, 40 deletions

diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c
index 20ef63820c776e..f5c00f903df383 100644
--- a/drivers/i2c/busses/i2c-altera.c
+++ b/drivers/i2c/busses/i2c-altera.c
@@ -384,7 +384,6 @@ static int altr_i2c_probe(struct platform_device *pdev)
 	struct altr_i2c_dev *idev = NULL;
 	struct resource *res;
 	int irq, ret;
-	u32 val;
 
 	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
 	if (!idev)
@@ -411,17 +410,17 @@ static int altr_i2c_probe(struct platform_device *pdev)
 	init_completion(&idev->msg_complete);
 	spin_lock_init(&idev->lock);
 
-	val = device_property_read_u32(idev->dev, "fifo-size",
+	ret = device_property_read_u32(idev->dev, "fifo-size",
 				       &idev->fifo_size);
-	if (val) {
+	if (ret) {
 		dev_err(&pdev->dev, "FIFO size set to default of %d\n",
 			ALTR_I2C_DFLT_FIFO_SZ);
 		idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ;
 	}
 
-	val = device_property_read_u32(idev->dev, "clock-frequency",
+	ret = device_property_read_u32(idev->dev, "clock-frequency",
 				       &idev->bus_clk_rate);
-	if (val) {
+	if (ret) {
 		dev_err(&pdev->dev, "Default to 100kHz\n");
 		idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;	/* default clock rate */
 	}
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index c98befe2a92e04..5536673060cc63 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -354,10 +354,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	adap->dev.of_node = pdev->dev.of_node;
 	adap->nr = -1;
 
-	dev_pm_set_driver_flags(&pdev->dev,
-				DPM_FLAG_SMART_PREPARE |
-				DPM_FLAG_SMART_SUSPEND |
-				DPM_FLAG_LEAVE_SUSPENDED);
+	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
+		dev_pm_set_driver_flags(&pdev->dev,
+					DPM_FLAG_SMART_PREPARE |
+					DPM_FLAG_LEAVE_SUSPENDED);
+	} else {
+		dev_pm_set_driver_flags(&pdev->dev,
+					DPM_FLAG_SMART_PREPARE |
+					DPM_FLAG_SMART_SUSPEND |
+					DPM_FLAG_LEAVE_SUSPENDED);
+	}
 
 	/* The code below assumes runtime PM to be disabled. */
 	WARN_ON(pm_runtime_enabled(&pdev->dev));
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 4c4d17ddc96b96..8280ac7cc1b7df 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -996,14 +996,13 @@ tegra_i2c_poll_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 	do {
 		u32 status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
-		if (status) {
+		if (status)
 			tegra_i2c_isr(i2c_dev->irq, i2c_dev);
 
-			if (completion_done(complete)) {
-				s64 delta = ktime_ms_delta(ktimeout, ktime);
+		if (completion_done(complete)) {
+			s64 delta = ktime_ms_delta(ktimeout, ktime);
 
-				return msecs_to_jiffies(delta) ?: 1;
-			}
+			return msecs_to_jiffies(delta) ?: 1;
 		}
 
 		ktime = ktime_get();
@@ -1030,14 +1029,18 @@ tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 		disable_irq(i2c_dev->irq);
 
 		/*
-		 * There is a chance that completion may happen after IRQ
-		 * synchronization, which is done by disable_irq().
+		 * Under some rare circumstances (like running KASAN +
+		 * NFS root) CPU, which handles interrupt, may stuck in
+		 * uninterruptible state for a significant time.  In this
+		 * case we will get timeout if I2C transfer is running on
+		 * a sibling CPU, despite of IRQ being raised.
+		 *
+		 * In order to handle this rare condition, the IRQ status
+		 * needs to be checked after timeout.
 		 */
-		if (ret == 0 && completion_done(complete)) {
-			dev_warn(i2c_dev->dev,
-				 "completion done after timeout\n");
-			ret = 1;
-		}
+		if (ret == 0)
+			ret = tegra_i2c_poll_completion_timeout(i2c_dev,
+								complete, 0);
 	}
 
 	return ret;
@@ -1216,6 +1219,15 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		time_left = tegra_i2c_wait_completion_timeout(
 				i2c_dev, &i2c_dev->dma_complete, xfer_time);
 
+		/*
+		 * Synchronize DMA first, since dmaengine_terminate_sync()
+		 * performs synchronization after the transfer's termination
+		 * and we want to get a completion if transfer succeeded.
+		 */
+		dmaengine_synchronize(i2c_dev->msg_read ?
+				      i2c_dev->rx_dma_chan :
+				      i2c_dev->tx_dma_chan);
+
 		dmaengine_terminate_sync(i2c_dev->msg_read ?
 					 i2c_dev->rx_dma_chan :
 					 i2c_dev->tx_dma_chan);
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 5cc0b0ec5570bd..a6691278206474 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -2273,19 +2273,6 @@ i2c_new_scanned_device(struct i2c_adapter *adap,
 }
 EXPORT_SYMBOL_GPL(i2c_new_scanned_device);
 
-struct i2c_client *
-i2c_new_probed_device(struct i2c_adapter *adap,
-		      struct i2c_board_info *info,
-		      unsigned short const *addr_list,
-		      int (*probe)(struct i2c_adapter *adap, unsigned short addr))
-{
-	struct i2c_client *client;
-
-	client = i2c_new_scanned_device(adap, info, addr_list, probe);
-	return IS_ERR(client) ? NULL : client;
-}
-EXPORT_SYMBOL_GPL(i2c_new_probed_device);
-
 struct i2c_adapter *i2c_get_adapter(int nr)
 {
 	struct i2c_adapter *adapter;
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 456fc17ecb1c38..45d36ba4826bd8 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -461,12 +461,6 @@ i2c_new_scanned_device(struct i2c_adapter *adap,
 		       unsigned short const *addr_list,
 		       int (*probe)(struct i2c_adapter *adap, unsigned short addr));
 
-struct i2c_client *
-i2c_new_probed_device(struct i2c_adapter *adap,
-		       struct i2c_board_info *info,
-		       unsigned short const *addr_list,
-		       int (*probe)(struct i2c_adapter *adap, unsigned short addr));
-
 /* Common custom probe functions */
 int i2c_probe_func_quick_read(struct i2c_adapter *adap, unsigned short addr);