Merge tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Some late GPIO fixes for the v5.9 series:

   - Fix compiler warnings on the OMAP when PM is disabled

   - Clear the interrupt when setting edge sensitivity on the Spreadtrum
     driver.

   - Fix up spurious interrupts on the TC35894.

   - Support threaded interrupts on the Siox controller.

   - Fix resource leaks on the mockup driver.

   - Fix line event handling in syscall compatible mode for the
     character device.

   - Fix an unitialized variable in the PCA953A driver.

   - Fix access to all GPIO IRQs on the Aspeed AST2600.

   - Fix line direction on the AMD FCH driver.

   - Use the bitmap API instead of compiler intrinsics for bit
     manipulation in the PCA953x driver"

* tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x
  gpio: pca953x: Use bitmap API over implicit GCC extension
  gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION
  gpio: aspeed: fix ast2600 bank properties
  gpio/aspeed-sgpio: don't enable all interrupts by default
  gpio/aspeed-sgpio: enable access to all 80 input & output sgpios
  gpio: pca953x: Fix uninitialized pending variable
  gpiolib: Fix line event handling in syscall compatible mode
  gpio: mockup: fix resource leak in error path
  gpio: siox: explicitly support only threaded irqs
  gpio: tc35894: fix up tc35894 interrupt configuration
  gpio: sprd: Clear interrupt when setting the type as edge
  gpio: omap: Fix warnings if PM is disabled

11 files changed, 138 insertions, 60 deletions

diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
index d4d83916c09dd9..be329ea4794f88 100644
--- a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
+++ b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
@@ -20,8 +20,9 @@ Required properties:
 - gpio-controller : Marks the device node as a GPIO controller
 - interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
 - interrupt-controller : Mark the GPIO controller as an interrupt-controller
-- ngpios : number of GPIO lines, see gpio.txt
-  (should be multiple of 8, up to 80 pins)
+- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose
+  2 software GPIOs per hardware GPIO: one for hardware input, one for hardware
+  output. Up to 80 pins, must be a multiple of 8.
 - clocks : A phandle to the APB clock for SGPM clock division
 - bus-frequency : SGPM CLK frequency
 
diff --git a/drivers/gpio/gpio-amd-fch.c b/drivers/gpio/gpio-amd-fch.c
index 4e44ba4d7423c7..2a21354ed6a030 100644
--- a/drivers/gpio/gpio-amd-fch.c
+++ b/drivers/gpio/gpio-amd-fch.c
@@ -92,7 +92,7 @@ static int amd_fch_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
 	ret = (readl_relaxed(ptr) & AMD_FCH_GPIO_FLAG_DIRECTION);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return ret ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
+	return ret ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN;
 }
 
 static void amd_fch_gpio_set(struct gpio_chip *gc,
diff --git a/drivers/gpio/gpio-aspeed-sgpio.c b/drivers/gpio/gpio-aspeed-sgpio.c
index 3aa45934d60c41..64e54f8c30d2d6 100644
--- a/drivers/gpio/gpio-aspeed-sgpio.c
+++ b/drivers/gpio/gpio-aspeed-sgpio.c
@@ -17,7 +17,17 @@
 #include <linux/spinlock.h>
 #include <linux/string.h>
 
-#define MAX_NR_SGPIO			80
+/*
+ * MAX_NR_HW_GPIO represents the number of actual hardware-supported GPIOs (ie,
+ * slots within the clocked serial GPIO data). Since each HW GPIO is both an
+ * input and an output, we provide MAX_NR_HW_GPIO * 2 lines on our gpiochip
+ * device.
+ *
+ * We use SGPIO_OUTPUT_OFFSET to define the split between the inputs and
+ * outputs; the inputs start at line 0, the outputs start at OUTPUT_OFFSET.
+ */
+#define MAX_NR_HW_SGPIO			80
+#define SGPIO_OUTPUT_OFFSET		MAX_NR_HW_SGPIO
 
 #define ASPEED_SGPIO_CTRL		0x54
 
@@ -30,8 +40,8 @@ struct aspeed_sgpio {
 	struct clk *pclk;
 	spinlock_t lock;
 	void __iomem *base;
-	uint32_t dir_in[3];
 	int irq;
+	int n_sgpio;
 };
 
 struct aspeed_sgpio_bank {
@@ -111,31 +121,69 @@ static void __iomem *bank_reg(struct aspeed_sgpio *gpio,
 	}
 }
 
-#define GPIO_BANK(x)    ((x) >> 5)
-#define GPIO_OFFSET(x)  ((x) & 0x1f)
+#define GPIO_BANK(x)    ((x % SGPIO_OUTPUT_OFFSET) >> 5)
+#define GPIO_OFFSET(x)  ((x % SGPIO_OUTPUT_OFFSET) & 0x1f)
 #define GPIO_BIT(x)     BIT(GPIO_OFFSET(x))
 
 static const struct aspeed_sgpio_bank *to_bank(unsigned int offset)
 {
-	unsigned int bank = GPIO_BANK(offset);
+	unsigned int bank;
+
+	bank = GPIO_BANK(offset);
 
 	WARN_ON(bank >= ARRAY_SIZE(aspeed_sgpio_banks));
 	return &aspeed_sgpio_banks[bank];
 }
 
+static int aspeed_sgpio_init_valid_mask(struct gpio_chip *gc,
+		unsigned long *valid_mask, unsigned int ngpios)
+{
+	struct aspeed_sgpio *sgpio = gpiochip_get_data(gc);
+	int n = sgpio->n_sgpio;
+	int c = SGPIO_OUTPUT_OFFSET - n;
+
+	WARN_ON(ngpios < MAX_NR_HW_SGPIO * 2);
+
+	/* input GPIOs in the lower range */
+	bitmap_set(valid_mask, 0, n);
+	bitmap_clear(valid_mask, n, c);
+
+	/* output GPIOS above SGPIO_OUTPUT_OFFSET */
+	bitmap_set(valid_mask, SGPIO_OUTPUT_OFFSET, n);
+	bitmap_clear(valid_mask, SGPIO_OUTPUT_OFFSET + n, c);
+
+	return 0;
+}
+
+static void aspeed_sgpio_irq_init_valid_mask(struct gpio_chip *gc,
+		unsigned long *valid_mask, unsigned int ngpios)
+{
+	struct aspeed_sgpio *sgpio = gpiochip_get_data(gc);
+	int n = sgpio->n_sgpio;
+
+	WARN_ON(ngpios < MAX_NR_HW_SGPIO * 2);
+
+	/* input GPIOs in the lower range */
+	bitmap_set(valid_mask, 0, n);
+	bitmap_clear(valid_mask, n, ngpios - n);
+}
+
+static bool aspeed_sgpio_is_input(unsigned int offset)
+{
+	return offset < SGPIO_OUTPUT_OFFSET;
+}
+
 static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int offset)
 {
 	struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
 	const struct aspeed_sgpio_bank *bank = to_bank(offset);
 	unsigned long flags;
 	enum aspeed_sgpio_reg reg;
-	bool is_input;
 	int rc = 0;
 
 	spin_lock_irqsave(&gpio->lock, flags);
 
-	is_input = gpio->dir_in[GPIO_BANK(offset)] & GPIO_BIT(offset);
-	reg = is_input ? reg_val : reg_rdata;
+	reg = aspeed_sgpio_is_input(offset) ? reg_val : reg_rdata;
 	rc = !!(ioread32(bank_reg(gpio, bank, reg)) & GPIO_BIT(offset));
 
 	spin_unlock_irqrestore(&gpio->lock, flags);
@@ -143,22 +191,31 @@ static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int offset)
 	return rc;
 }
 
-static void sgpio_set_value(struct gpio_chip *gc, unsigned int offset, int val)
+static int sgpio_set_value(struct gpio_chip *gc, unsigned int offset, int val)
 {
 	struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
 	const struct aspeed_sgpio_bank *bank = to_bank(offset);
-	void __iomem *addr;
+	void __iomem *addr_r, *addr_w;
 	u32 reg = 0;
 
-	addr = bank_reg(gpio, bank, reg_val);
-	reg = ioread32(addr);
+	if (aspeed_sgpio_is_input(offset))
+		return -EINVAL;
+
+	/* Since this is an output, read the cached value from rdata, then
+	 * update val. */
+	addr_r = bank_reg(gpio, bank, reg_rdata);
+	addr_w = bank_reg(gpio, bank, reg_val);
+
+	reg = ioread32(addr_r);
 
 	if (val)
 		reg |= GPIO_BIT(offset);
 	else
 		reg &= ~GPIO_BIT(offset);
 
-	iowrite32(reg, addr);
+	iowrite32(reg, addr_w);
+
+	return 0;
 }
 
 static void aspeed_sgpio_set(struct gpio_chip *gc, unsigned int offset, int val)
@@ -175,43 +232,28 @@ static void aspeed_sgpio_set(struct gpio_chip *gc, unsigned int offset, int val)
 
 static int aspeed_sgpio_dir_in(struct gpio_chip *gc, unsigned int offset)
 {
-	struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
-	unsigned long flags;
-
-	spin_lock_irqsave(&gpio->lock, flags);
-	gpio->dir_in[GPIO_BANK(offset)] |= GPIO_BIT(offset);
-	spin_unlock_irqrestore(&gpio->lock, flags);
-
-	return 0;
+	return aspeed_sgpio_is_input(offset) ? 0 : -EINVAL;
 }
 
 static int aspeed_sgpio_dir_out(struct gpio_chip *gc, unsigned int offset, int val)
 {
 	struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
 	unsigned long flags;
+	int rc;
 
-	spin_lock_irqsave(&gpio->lock, flags);
-
-	gpio->dir_in[GPIO_BANK(offset)] &= ~GPIO_BIT(offset);
-	sgpio_set_value(gc, offset, val);
+	/* No special action is required for setting the direction; we'll
+	 * error-out in sgpio_set_value if this isn't an output GPIO */
 
+	spin_lock_irqsave(&gpio->lock, flags);
+	rc = sgpio_set_value(gc, offset, val);
 	spin_unlock_irqrestore(&gpio->lock, flags);
 
-	return 0;
+	return rc;
 }
 
 static int aspeed_sgpio_get_direction(struct gpio_chip *gc, unsigned int offset)
 {
-	int dir_status;
-	struct aspeed_sgpio *gpio = gpiochip_get_data(gc);
-	unsigned long flags;
-
-	spin_lock_irqsave(&gpio->lock, flags);
-	dir_status = gpio->dir_in[GPIO_BANK(offset)] & GPIO_BIT(offset);
-	spin_unlock_irqrestore(&gpio->lock, flags);
-
-	return dir_status;
-
+	return !!aspeed_sgpio_is_input(offset);
 }
 
 static void irqd_to_aspeed_sgpio_data(struct irq_data *d,
@@ -402,6 +444,7 @@ static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
 
 	irq = &gpio->chip.irq;
 	irq->chip = &aspeed_sgpio_irqchip;
+	irq->init_valid_mask = aspeed_sgpio_irq_init_valid_mask;
 	irq->handler = handle_bad_irq;
 	irq->default_type = IRQ_TYPE_NONE;
 	irq->parent_handler = aspeed_sgpio_irq_handler;
@@ -409,17 +452,15 @@ static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
 	irq->parents = &gpio->irq;
 	irq->num_parents = 1;
 
-	/* set IRQ settings and Enable Interrupt */
+	/* Apply default IRQ settings */
 	for (i = 0; i < ARRAY_SIZE(aspeed_sgpio_banks); i++) {
 		bank = &aspeed_sgpio_banks[i];
 		/* set falling or level-low irq */
 		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type0));
 		/* trigger type is edge */
 		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type1));
-		/* dual edge trigger mode. */
-		iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_type2));
-		/* enable irq */
-		iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_enable));
+		/* single edge trigger */
+		iowrite32(0x00000000, bank_reg(gpio, bank, reg_irq_type2));
 	}
 
 	return 0;
@@ -452,11 +493,12 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
 	if (rc < 0) {
 		dev_err(&pdev->dev, "Could not read ngpios property\n");
 		return -EINVAL;
-	} else if (nr_gpios > MAX_NR_SGPIO) {
+	} else if (nr_gpios > MAX_NR_HW_SGPIO) {
 		dev_err(&pdev->dev, "Number of GPIOs exceeds the maximum of %d: %d\n",
-			MAX_NR_SGPIO, nr_gpios);
+			MAX_NR_HW_SGPIO, nr_gpios);
 		return -EINVAL;
 	}
+	gpio->n_sgpio = nr_gpios;
 
 	rc = of_property_read_u32(pdev->dev.of_node, "bus-frequency", &sgpio_freq);
 	if (rc < 0) {
@@ -497,7 +539,8 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
 	spin_lock_init(&gpio->lock);
 
 	gpio->chip.parent = &pdev->dev;
-	gpio->chip.ngpio = nr_gpios;
+	gpio->chip.ngpio = MAX_NR_HW_SGPIO * 2;
+	gpio->chip.init_valid_mask = aspeed_sgpio_init_valid_mask;
 	gpio->chip.direction_input = aspeed_sgpio_dir_in;
 	gpio->chip.direction_output = aspeed_sgpio_dir_out;
 	gpio->chip.get_direction = aspeed_sgpio_get_direction;
@@ -509,9 +552,6 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
 	gpio->chip.label = dev_name(&pdev->dev);
 	gpio->chip.base = -1;
 
-	/* set all SGPIO pins as input (1). */
-	memset(gpio->dir_in, 0xff, sizeof(gpio->dir_in));
-
 	aspeed_sgpio_setup_irqs(gpio, pdev);
 
 	rc = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index bf08b4561f3616..e44d5de2a1201a 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -1114,8 +1114,8 @@ static const struct aspeed_gpio_config ast2500_config =
 
 static const struct aspeed_bank_props ast2600_bank_props[] = {
 	/*     input	  output   */
-	{5, 0xffffffff,  0x0000ffff}, /* U/V/W/X */
-	{6, 0xffff0000,  0x0fff0000}, /* Y/Z */
+	{5, 0xffffffff,  0xffffff00}, /* U/V/W/X */
+	{6, 0x0000ffff,  0x0000ffff}, /* Y/Z */
 	{ },
 };
 
diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c
index bc345185db2609..1652897fdf90d1 100644
--- a/drivers/gpio/gpio-mockup.c
+++ b/drivers/gpio/gpio-mockup.c
@@ -552,6 +552,7 @@ static int __init gpio_mockup_init(void)
 	err = platform_driver_register(&gpio_mockup_driver);
 	if (err) {
 		gpio_mockup_err("error registering platform driver\n");
+		debugfs_remove_recursive(gpio_mockup_dbg_dir);
 		return err;
 	}
 
@@ -582,6 +583,7 @@ static int __init gpio_mockup_init(void)
 			gpio_mockup_err("error registering device");
 			platform_driver_unregister(&gpio_mockup_driver);
 			gpio_mockup_unregister_pdevs();
+			debugfs_remove_recursive(gpio_mockup_dbg_dir);
 			return PTR_ERR(pdev);
 		}
 
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 7fbe0c9e1fc10c..0ea640fb636cf0 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1516,7 +1516,7 @@ static int __maybe_unused omap_gpio_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static int omap_gpio_suspend(struct device *dev)
+static int __maybe_unused omap_gpio_suspend(struct device *dev)
 {
 	struct gpio_bank *bank = dev_get_drvdata(dev);
 
@@ -1528,7 +1528,7 @@ static int omap_gpio_suspend(struct device *dev)
 	return omap_gpio_runtime_suspend(dev);
 }
 
-static int omap_gpio_resume(struct device *dev)
+static int __maybe_unused omap_gpio_resume(struct device *dev)
 {
 	struct gpio_bank *bank = dev_get_drvdata(dev);
 
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index bd2e96c34f824f..fb61f2fc6ed7cf 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -818,6 +818,8 @@ static irqreturn_t pca953x_irq_handler(int irq, void *devid)
 	int level;
 	bool ret;
 
+	bitmap_zero(pending, MAX_LINE);
+
 	mutex_lock(&chip->i2c_lock);
 	ret = pca953x_irq_pending(chip, pending);
 	mutex_unlock(&chip->i2c_lock);
@@ -940,6 +942,7 @@ out:
 static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
 {
 	DECLARE_BITMAP(val, MAX_LINE);
+	unsigned int i;
 	int ret;
 
 	ret = device_pca95xx_init(chip, invert);
@@ -947,7 +950,9 @@ static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
 		goto out;
 
 	/* To enable register 6, 7 to control pull up and pull down */
-	memset(val, 0x02, NBANK(chip));
+	for (i = 0; i < NBANK(chip); i++)
+		bitmap_set_value8(val, 0x02, i * BANK_SZ);
+
 	ret = pca953x_write_regs(chip, PCA957X_BKEN, val);
 	if (ret)
 		goto out;
diff --git a/drivers/gpio/gpio-siox.c b/drivers/gpio/gpio-siox.c
index 26e1fe092304d4..f8c5e9fc4baca4 100644
--- a/drivers/gpio/gpio-siox.c
+++ b/drivers/gpio/gpio-siox.c
@@ -245,6 +245,7 @@ static int gpio_siox_probe(struct siox_device *sdevice)
 	girq->chip = &ddata->ichip;
 	girq->default_type = IRQ_TYPE_NONE;
 	girq->handler = handle_level_irq;
+	girq->threaded = true;
 
 	ret = devm_gpiochip_add_data(dev, &ddata->gchip, NULL);
 	if (ret)
diff --git a/drivers/gpio/gpio-sprd.c b/drivers/gpio/gpio-sprd.c
index d7314d39ab65ba..36ea8a3bd4510f 100644
--- a/drivers/gpio/gpio-sprd.c
+++ b/drivers/gpio/gpio-sprd.c
@@ -149,17 +149,20 @@ static int sprd_gpio_irq_set_type(struct irq_data *data,
 		sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
 		sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0);
 		sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 1);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
 		irq_set_handler_locked(data, handle_edge_irq);
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
 		sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
 		sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0);
 		sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 0);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
 		irq_set_handler_locked(data, handle_edge_irq);
 		break;
 	case IRQ_TYPE_EDGE_BOTH:
 		sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
 		sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 1);
+		sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
 		irq_set_handler_locked(data, handle_edge_irq);
 		break;
 	case IRQ_TYPE_LEVEL_HIGH:
diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
index 58b0da9eb76f76..ea3f68a28feafa 100644
--- a/drivers/gpio/gpio-tc3589x.c
+++ b/drivers/gpio/gpio-tc3589x.c
@@ -212,7 +212,7 @@ static void tc3589x_gpio_irq_sync_unlock(struct irq_data *d)
 				continue;
 
 			tc3589x_gpio->oldregs[i][j] = new;
-			tc3589x_reg_write(tc3589x, regmap[i] + j * 8, new);
+			tc3589x_reg_write(tc3589x, regmap[i] + j, new);
 		}
 	}
 
diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index e6c9b78adfc26b..76c36b05aef6af 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -423,6 +423,21 @@ static __poll_t lineevent_poll(struct file *file,
 	return events;
 }
 
+static ssize_t lineevent_get_size(void)
+{
+#ifdef __x86_64__
+	/* i386 has no padding after 'id' */
+	if (in_ia32_syscall()) {
+		struct compat_gpioeevent_data {
+			compat_u64	timestamp;
+			u32		id;
+		};
+
+		return sizeof(struct compat_gpioeevent_data);
+	}
+#endif
+	return sizeof(struct gpioevent_data);
+}
 
 static ssize_t lineevent_read(struct file *file,
 			      char __user *buf,
@@ -432,9 +447,20 @@ static ssize_t lineevent_read(struct file *file,
 	struct lineevent_state *le = file->private_data;
 	struct gpioevent_data ge;
 	ssize_t bytes_read = 0;
+	ssize_t ge_size;
 	int ret;
 
-	if (count < sizeof(ge))
+	/*
+	 * When compatible system call is being used the struct gpioevent_data,
+	 * in case of at least ia32, has different size due to the alignment
+	 * differences. Because we have first member 64 bits followed by one of
+	 * 32 bits there is no gap between them. The only difference is the
+	 * padding at the end of the data structure. Hence, we calculate the
+	 * actual sizeof() and pass this as an argument to copy_to_user() to
+	 * drop unneeded bytes from the output.
+	 */
+	ge_size = lineevent_get_size();
+	if (count < ge_size)
 		return -EINVAL;
 
 	do {
@@ -470,10 +496,10 @@ static ssize_t lineevent_read(struct file *file,
 			break;
 		}
 
-		if (copy_to_user(buf + bytes_read, &ge, sizeof(ge)))
+		if (copy_to_user(buf + bytes_read, &ge, ge_size))
 			return -EFAULT;
-		bytes_read += sizeof(ge);
-	} while (count >= bytes_read + sizeof(ge));
+		bytes_read += ge_size;
+	} while (count >= bytes_read + ge_size);
 
 	return bytes_read;
 }