diff options
| -rw-r--r-- | event.c | 2 | ||||
| -rw-r--r-- | info.c | 2 | ||||
| -rw-r--r-- | interface.c | 7 | ||||
| -rw-r--r-- | nl80211.h | 80 | ||||
| -rwxr-xr-x | version.sh | 2 |
5 files changed, 78 insertions, 15 deletions
@@ -295,6 +295,8 @@ static void parse_wowlan_wake_event(struct nlattr **attrs) printf("\t* TCP connection lost\n"); if (tb[NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS]) printf("\t* TCP connection ran out of tokens\n"); + if (tb[NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC]) + printf("\t* unprotected deauth/disassoc\n"); } extern struct vendor_event *__start_vendor_event[]; @@ -172,6 +172,8 @@ static void ext_feat_print(enum nl80211_ext_feature_index idx) ext_feat_case(AUTH_AND_DEAUTH_RANDOM_TA, "random auth/deauth transmitter address"); ext_feat_case(OWE_OFFLOAD, "OWE DH element handling offload (client)"); ext_feat_case(OWE_OFFLOAD_AP, "OWE DH element handling offload (AP)"); + ext_feat_case(DFS_CONCURRENT, "DFS channel use under concurrent DFS master"); + ext_feat_case(SPP_AMSDU_SUPPORT, "SPP A-MSDU support"); } } diff --git a/interface.c b/interface.c index eeef496..bb1a1d3 100644 --- a/interface.c +++ b/interface.c @@ -385,6 +385,13 @@ static void print_channel(struct nlattr **tb) if (tb[NL80211_ATTR_CENTER_FREQ2]) printf(", center2: %d MHz", nla_get_u32(tb[NL80211_ATTR_CENTER_FREQ2])); + + if (tb[NL80211_ATTR_PUNCT_BITMAP]) { + uint32_t punct = nla_get_u32(tb[NL80211_ATTR_PUNCT_BITMAP]); + + if (punct) + printf(", punctured: 0x%x", punct); + } } else if (tb[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) { enum nl80211_channel_type channel_type; @@ -11,7 +11,7 @@ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * Copyright 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018-2023 Intel Corporation + * Copyright (C) 2018-2024 Intel Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above @@ -438,7 +438,8 @@ * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type * of disconnection indication should be sent to the station * (Deauthentication or Disassociation frame and reason code for that - * frame). + * frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove + * stations connected and using at least that link as one of its links. * * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to * destination %NL80211_ATTR_MAC on the interface identified by @@ -2851,6 +2852,10 @@ enum nl80211_commands { * mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element) * in Draft P802.11be_D4.0. * + * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with + * %NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs + * are used on this connection + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3394,6 +3399,8 @@ enum nl80211_attrs { NL80211_ATTR_MLO_TTLM_DLINK, NL80211_ATTR_MLO_TTLM_ULINK, + NL80211_ATTR_ASSOC_SPP_AMSDU, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -3534,6 +3541,7 @@ enum nl80211_iftype { * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a * previously added station into associated state + * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -3546,6 +3554,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_TDLS_PEER, NL80211_STA_FLAG_ASSOCIATED, + NL80211_STA_FLAG_SPP_AMSDU, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -4256,6 +4265,17 @@ enum nl80211_wmm_rule { * in current regulatory domain. * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that * is allowed on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is + * allowed for peer-to-peer or adhoc communication under the control + * of a DFS master which operates on the same channel (FCC-594280 D01 + * Section B.3). Should be used together with %NL80211_RRF_DFS only. + * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP + * not allowed using this channel + * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP + * not allowed using this channel + * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor + * mode despite other (regulatory) restrictions, even if the channel is + * otherwise completely disabled. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4295,6 +4315,10 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_320MHZ, NL80211_FREQUENCY_ATTR_NO_EHT, NL80211_FREQUENCY_ATTR_PSD, + NL80211_FREQUENCY_ATTR_DFS_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT, + NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT, + NL80211_FREQUENCY_ATTR_CAN_MONITOR, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -4307,6 +4331,10 @@ enum nl80211_frequency_attr { #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ NL80211_FREQUENCY_ATTR_IR_CONCURRENT +#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \ + NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT +#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \ + NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT /** * enum nl80211_bitrate_attr - bitrate attributes @@ -4444,14 +4472,7 @@ enum nl80211_reg_rule_attr { * value as specified by &struct nl80211_bss_select_rssi_adjust. * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching * (this cannot be used together with SSID). - * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the - * band specific minimum rssi thresholds for the bands defined in - * enum nl80211_band. The minimum rssi threshold value(s32) specific to a - * band shall be encapsulated in attribute with type value equals to one - * of the NL80211_BAND_* defined in enum nl80211_band. For example, the - * minimum rssi threshold value for 2.4GHZ band shall be encapsulated - * within an attribute of type NL80211_BAND_2GHZ. And one or more of such - * attributes will be nested within this attribute. + * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use @@ -4464,7 +4485,7 @@ enum nl80211_sched_scan_match_attr { NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, - NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, + NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */ /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, @@ -4500,6 +4521,12 @@ enum nl80211_sched_scan_match_attr { * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed * @NL80211_RRF_NO_EHT: EHT operation not allowed * @NL80211_RRF_PSD: Ruleset has power spectral density value + * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for + peer-to-peer or adhoc communication under the control of a DFS master + which operates on the same channel (FCC-594280 D01 Section B.3). + Should be used together with %NL80211_RRF_DFS only. + * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed + * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed */ enum nl80211_reg_rule_flags { NL80211_RRF_NO_OFDM = 1<<0, @@ -4521,6 +4548,9 @@ enum nl80211_reg_rule_flags { NL80211_RRF_NO_320MHZ = 1<<18, NL80211_RRF_NO_EHT = 1<<19, NL80211_RRF_PSD = 1<<20, + NL80211_RRF_DFS_CONCURRENT = 1<<21, + NL80211_RRF_NO_6GHZ_VLP_CLIENT = 1<<22, + NL80211_RRF_NO_6GHZ_AFC_CLIENT = 1<<23, }; #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR @@ -4529,6 +4559,8 @@ enum nl80211_reg_rule_flags { #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ NL80211_RRF_NO_HT40PLUS) #define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT +#define NL80211_RRF_NO_UHB_VLP_CLIENT NL80211_RRF_NO_6GHZ_VLP_CLIENT +#define NL80211_RRF_NO_UHB_AFC_CLIENT NL80211_RRF_NO_6GHZ_AFC_CLIENT /* For backport compatibility with older userspace */ #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) @@ -5076,11 +5108,17 @@ enum nl80211_bss_use_for { * BSS isn't possible * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't * supported by the device, and this BSS entry represents one. + * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting + * the AP power type (SP, VLP, AP) that the AP uses. */ enum nl80211_bss_cannot_use_reasons { NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY = 1 << 0, + NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH = 1 << 1, }; +#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \ + NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH + /** * enum nl80211_bss - netlink attributes for a BSS * @@ -5719,6 +5757,8 @@ struct nl80211_pattern_support { * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one * frequency, it means that the match occurred in more than one * channel. + * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only. + * Wake up happened due to unprotected deauth or disassoc frame in MFP. * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number * @@ -5746,6 +5786,7 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, NL80211_WOWLAN_TRIG_NET_DETECT, NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, + NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC, /* keep last */ NUM_NL80211_WOWLAN_TRIG, @@ -6387,8 +6428,7 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching * (set/del PMKSA operations) in AP mode. * - * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports - * filtering of sched scan results using band specific RSSI thresholds. + * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete * * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power * to a station. @@ -6492,6 +6532,16 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE * handling in AP mode. * + * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or + * ad hoc operation on DFS channels under the control of a concurrent + * DFS master on the same channel as described in FCC-594280 D01 + * (Section B.3). This, for example, allows P2P GO and P2P clients to + * operate on DFS channels as long as there's a concurrent BSS connection. + * + * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP + * (signaling and payload protected) A-MSDUs and this shall be advertised + * in the RSNXE. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6533,7 +6583,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, NL80211_EXT_FEATURE_AP_PMKSA_CACHING, - NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, + NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */ NL80211_EXT_FEATURE_EXT_KEY_ID, NL80211_EXT_FEATURE_STA_TX_PWR, NL80211_EXT_FEATURE_SAE_OFFLOAD, @@ -6565,6 +6615,8 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA, NL80211_EXT_FEATURE_OWE_OFFLOAD, NL80211_EXT_FEATURE_OWE_OFFLOAD_AP, + NL80211_EXT_FEATURE_DFS_CONCURRENT, + NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -1,6 +1,6 @@ #!/bin/sh -VERSION="6.7" +VERSION="6.9" OUT="$1" # get the absolute path for the OUT file |