diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8953.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8953.dtsi | 155 |
1 files changed, 153 insertions, 2 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index ad2f8cf9c966c5..f1011bb641c619 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -859,6 +859,8 @@ "vsync", "core"; + resets = <&gcc GCC_MDSS_BCR>; + #address-cells = <1>; #size-cells = <1>; ranges; @@ -1044,6 +1046,125 @@ }; }; + gpu: gpu@1c00000 { + compatible = "qcom,adreno-506.0", "qcom,adreno"; + reg = <0x01c00000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GCC_OXILI_TIMER_CLK>, + <&gcc GCC_OXILI_AON_CLK>; + clock-names = "core", + "iface", + "mem_iface", + "alt_mem_iface", + "rbbmtimer", + "alwayson"; + power-domains = <&gcc OXILI_GX_GDSC>; + + iommus = <&gpu_iommu 0>; + operating-points-v2 = <&gpu_opp_table>; + + #cooling-cells = <2>; + + status = "disabled"; + + zap-shader { + memory-region = <&zap_shader_region>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-133300000 { + opp-hz = /bits/ 64 <133300000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-216000000 { + opp-hz = /bits/ 64 <216000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-560000000 { + opp-hz = /bits/ 64 <560000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_nom_plus>; + }; + + /* + * This opp is only available on msm8953 and + * sdm632, the max for sdm450 is 600MHz. + */ + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + opp-supported-hw = <0xff>; + required-opps = <&rpmpd_opp_turbo>; + }; + }; + }; + + gpu_iommu: iommu@1c48000 { + compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v2"; + ranges = <0 0x01c48000 0x8000>; + + clocks = <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>; + clock-names = "iface", "bus"; + + power-domains = <&gcc OXILI_CX_GDSC>; + + qcom,iommu-secure-id = <18>; + + #address-cells = <1>; + #iommu-cells = <1>; + #size-cells = <1>; + + /* gfx3d_user */ + iommu-ctx@0 { + compatible = "qcom,msm-iommu-v2-ns"; + reg = <0x0000 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* gfx3d_secure */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v2-sec"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + apps_iommu: iommu@1e20000 { compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; ranges = <0 0x01e20000 0x20000>; @@ -1160,9 +1281,12 @@ #size-cells = <1>; ranges; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupt-names = "pwr_event", + "qusb2_phy", + "ss_phy_irq"; clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, @@ -2012,6 +2136,33 @@ }; }; }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 15>; + + trips { + gpu_alert: trip-point0 { + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&gpu_alert>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; }; timer { |