1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
|
From b05042223346bdeceecd5f4039da27b86010f682 Mon Sep 17 00:00:00 2001
From: Tim Schendekehl <tim.schendekehl@egnite.de>
Date: Tue, 24 Apr 2012 18:47:59 +0200
Subject: Ethernut 5 board support
commit 26690863e2c1fa4fee5f6137b219f4b8a1a02287 upstream.
Add support for the Ethernut 5 open hardware design, based
on Atmel's AT91SAM9XE512 SoC.
Signed-off-by: Tim Schendekehl <tim.schendekehl@egnite.de>
---
arch/arm/boot/dts/ethernut5.dts | 84 ++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-at91/Makefile.boot | 1 +
2 files changed, 85 insertions(+)
create mode 100644 arch/arm/boot/dts/ethernut5.dts
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
new file mode 100644
index 0000000..1ea9d34
--- /dev/null
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -0,0 +1,84 @@
+/*
+ * ethernut5.dts - Device Tree file for Ethernut 5 board
+ *
+ * Copyright (C) 2012 egnite GmbH <info@egnite.de>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+
+/ {
+ model = "Ethernut 5";
+ compatible = "egnite,ethernut5", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
+ };
+
+ memory {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ usart0: serial@fffb0000 {
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 0>;
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ gpios = <0
+ &pioC 14 0
+ 0
+ >;
+
+ root@0 {
+ label = "root";
+ reg = <0x0 0x08000000>;
+ };
+
+ data@20000 {
+ label = "data";
+ reg = <0x08000000 0x38000000>;
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ pcf8563@50 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+};
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 99e8097..c03417d 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -15,6 +15,7 @@ endif
# Keep dtb files sorted alphabetically for each SoC
# sam9260
+dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
# sam9263
--
1.8.0.197.g5a90748
|