net: stmmac: Prevent DSA tags from breaking COE

Some DSA tagging protocols change the EtherType field in the MAC header
e.g.  DSA_TAG_PROTO_(DSA/EDSA/BRCM/MTK/RTL4C_A/SJA1105). On TX these tagged
frames are ignored by the checksum offload engine and IP header checker of
some stmmac cores.

On RX, the stmmac driver wrongly assumes that checksums have been computed
for these tagged packets, and sets CHECKSUM_UNNECESSARY.

Add an additional check in the stmmac TX and RX hotpaths so that COE is
deactivated for packets with ethertypes that will not trigger the COE and
IP header checks.

Fixes: 6b2c6e4a938f ("net: stmmac: propagate feature flags to vlan")
Cc:  <stable@vger.kernel.org>
Reported-by: Richard Tresidder <rtresidd@electromag.com.au>
Link: https://lore.kernel.org/netdev/e5c6c75f-2dfa-4e50-a1fb-6bf4cdb617c2@electromag.com.au/
Reported-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://lore.kernel.org/netdev/c57283ed-6b9b-b0e6-ee12-5655c1c54495@bootlin.com/
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 29 insertions, 3 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c78a96b8eb6499..a0e46369ae158b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4436,6 +4436,28 @@ dma_map_err:
 }
 
 /**
+ * stmmac_has_ip_ethertype() - Check if packet has IP ethertype
+ * @skb: socket buffer to check
+ *
+ * Check if a packet has an ethertype that will trigger the IP header checks
+ * and IP/TCP checksum engine of the stmmac core.
+ *
+ * Return: true if the ethertype can trigger the checksum engine, false
+ * otherwise
+ */
+static bool stmmac_has_ip_ethertype(struct sk_buff *skb)
+{
+	int depth = 0;
+	__be16 proto;
+
+	proto = __vlan_get_protocol(skb, eth_header_parse_protocol(skb),
+				    &depth);
+
+	return (depth <= ETH_HLEN) &&
+		(proto == htons(ETH_P_IP) || proto == htons(ETH_P_IPV6));
+}
+
+/**
  *  stmmac_xmit - Tx entry point of the driver
  *  @skb : the socket buffer
  *  @dev : device pointer
@@ -4499,9 +4521,13 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* DWMAC IPs can be synthesized to support tx coe only for a few tx
 	 * queues. In that case, checksum offloading for those queues that don't
 	 * support tx coe needs to fallback to software checksum calculation.
+	 *
+	 * Packets that won't trigger the COE e.g. most DSA-tagged packets will
+	 * also have to be checksummed in software.
 	 */
 	if (csum_insertion &&
-	    priv->plat->tx_queues_cfg[queue].coe_unsupported) {
+	    (priv->plat->tx_queues_cfg[queue].coe_unsupported ||
+	     !stmmac_has_ip_ethertype(skb))) {
 		if (unlikely(skb_checksum_help(skb)))
 			goto dma_map_err;
 		csum_insertion = !csum_insertion;
@@ -5066,7 +5092,7 @@ static void stmmac_dispatch_skb_zc(struct stmmac_priv *priv, u32 queue,
 		stmmac_rx_vlan(priv->dev, skb);
 	skb->protocol = eth_type_trans(skb, priv->dev);
 
-	if (unlikely(!coe))
+	if (unlikely(!coe) || !stmmac_has_ip_ethertype(skb))
 		skb_checksum_none_assert(skb);
 	else
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -5589,7 +5615,7 @@ drain_data:
 
 		skb->protocol = eth_type_trans(skb, priv->dev);
 
-		if (unlikely(!coe))
+		if (unlikely(!coe) || !stmmac_has_ip_ethertype(skb))
 			skb_checksum_none_assert(skb);
 		else
 			skb->ip_summed = CHECKSUM_UNNECESSARY;