| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt::
"Eventfs fixes:
- With the usage of simple_recursive_remove() recommended by Al Viro,
the code should not be calling "d_invalidate()" itself. Doing so is
causing crashes. The code was calling d_invalidate() on the race of
trying to look up a file while the parent was being deleted. This
was detected, and the added dentry was having d_invalidate() called
on it, but the deletion of the directory was also calling
d_invalidate() on that same dentry.
- A fix to not free the eventfs_inode (ei) until the last dput() was
called on its ei->dentry made the ei->dentry exist even after it
was marked for free by setting the ei->is_freed. But code elsewhere
still was checking if ei->dentry was NULL if ei->is_freed is set
and would trigger WARN_ON if that was the case. That's no longer
true and there should not be any warnings when it is true.
- Use GFP_NOFS for allocations done under eventfs_mutex. The
eventfs_mutex can be taken on file system reclaim, make sure that
allocations done under that mutex do not trigger file system
reclaim.
- Clean up code by moving the taking of inode_lock out of the helper
functions and into where they are needed, and not use the parameter
to know to take it or not. It must always be held but some callers
of the helper function have it taken when they were called.
- Warn if the inode_lock is not held in the helper functions.
- Warn if eventfs_start_creating() is called without a parent. As
eventfs is underneath tracefs, all files created will have a parent
(the top one will have a tracefs parent).
Tracing update:
- Add Mathieu Desnoyers as an official reviewer of the tracing subsystem"
* tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer
eventfs: Make sure that parent->d_inode is locked in creating files/dirs
eventfs: Do not allow NULL parent to eventfs_start_creating()
eventfs: Move taking of inode_lock into dcache_dir_open_wrapper()
eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held
eventfs: Do not invalidate dentry in create_file/dir_dentry()
eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- Revert "net: r8169: Disable multicast filter for RTL8168H and
RTL8107E"
- kselftest: rtnetlink: fix ip route command typo
Current release - new code bugs:
- s390/ism: make sure ism driver implies smc protocol in kconfig
- two build fixes for tools/net
Previous releases - regressions:
- rxrpc: couple of ACK/PING/RTT handling fixes
Previous releases - always broken:
- bpf: verify bpf_loop() callbacks as if they are called unknown
number of times
- improve stability of auto-bonding with Hyper-V
- account BPF-neigh-redirected traffic in interface statistics
Misc:
- net: fill in some more MODULE_DESCRIPTION()s"
* tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
tools: ynl: fix duplicate op name in devlink
tools: ynl: fix header path for nfsd
net: ipa: fix one GSI register field width
tls: fix NULL deref on tls_sw_splice_eof() with empty record
net: axienet: Fix check for partial TX checksum
vsock/test: fix SEQPACKET message bounds test
i40e: Fix adding unsupported cloud filters
ice: restore timestamp configuration after device reset
ice: unify logic for programming PFINT_TSYN_MSK
ice: remove ptp_tx ring parameter flag
amd-xgbe: propagate the correct speed and duplex status
amd-xgbe: handle the corner-case during tx completion
amd-xgbe: handle corner-case during sfp hotplug
net: veth: fix ethtool stats reporting
octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
net: usb: qmi_wwan: claim interface 4 for ZTE MF290
Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
net/smc: avoid data corruption caused by decline
nfc: virtual_ncidev: Add variable to check if ndev is running
dpll: Fix potential msg memleak when genlmsg_put_reply failed
...
|
|
In order to make sure I get CC'd on tracing changes for which my input
would be relevant, add my name as reviewer of the TRACING subsystem.
Link: https://lore.kernel.org/linux-trace-kernel/20231115155018.8236-1-mathieu.desnoyers@efficios.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Just a few fixes (one with two non-fix deps) plus tidying up
MAINTAINERS"
* tag 'platform-drivers-x86-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel_telemetry: Fix kernel doc descriptions
MAINTAINERS: Drop Mark Gross as maintainer for x86 platform drivers
platform/x86/amd/pmc: adjust getting DRAM size behavior
platform/x86: hp-bioscfg: Remove unused obj in hp_add_other_attributes()
platform/x86: hp-bioscfg: Fix error handling in hp_add_other_attributes()
platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes()
platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes()
platform/x86: ideapad-laptop: Set max_brightness before using it
MAINTAINERS: Remove stale entry for SBL platform driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Tidy up erofs_read_inode() for simplicity
- Fix broken fscache mode due to NULL dereference of dif->bdev_handle
- Add the EROFS webpage to MAINTAINERS, documentation, and Kconfig
* tag 'erofs-for-6.7-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
MAINTAINERS: erofs: add EROFS webpage
erofs: fix NULL dereference of dif->bdev_handle in fscache mode
erofs: simplify erofs_read_inode()
|
|
indirect_call_wrapper.h is not, strictly speaking, networking specific.
However, it's git history indicates that in practice changes go through
netdev and thus the netdev maintainers have effectively been taking
responsibility for it.
Formalise this by adding it to the NETWORKING [GENERAL] section in the
MAINTAINERS file.
It is not clear how many other files under include/linux fall into this
category and it would be interesting, as a follow-up, to audit that and
propose further updates to the MAINTAINERS file as appropriate.
Link: https://lore.kernel.org/netdev/20231116010310.4664dd38@kernel.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231120-indirect_call_wrapper-maintainer-v1-1-0a6bb1f7363e@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Mark has not really been active as maintainer for x86 platform drivers
lately, drop Mark from the MAINTAINERS entries for drivers/platform/x86,
drivers/platform/mellanox and drivers/platform/surface.
Cc: Mark Gross <markgross@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231120154548.611041-1-hdegoede@redhat.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Ignore invalid x2APIC entries in order to not waste per-CPU data
- Fix a back-to-back signals handling scenario when shadow stack is in
use
- A documentation fix
- Add Kirill as TDX maintainer
* tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi: Ignore invalid x2APIC entries
x86/shstk: Delay signal entry SSP write until after user accesses
x86/Documentation: Indent 'note::' directive for protocol version number note
MAINTAINERS: Add Intel TDX entry
|
|
Pull xfs fixes from Chandan Babu:
- Fix deadlock arising due to intent items in AIL not being cleared
when log recovery fails
- Fix stale data exposure bug when remapping COW fork extents to data
fork
- Fix deadlock when data device flush fails
- Fix AGFL minimum size calculation
- Select DEBUG_FS instead of XFS_DEBUG when XFS_ONLINE_SCRUB_STATS is
selected
- Fix corruption of log inode's extent count field when NREXT64 feature
is enabled
* tag 'xfs-6.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: recovery should not clear di_flushiter unconditionally
xfs: inode recovery does not validate the recovered inode
xfs: fix again select in kconfig XFS_ONLINE_SCRUB_STATS
xfs: fix internal error from AGFL exhaustion
xfs: up(ic_sema) if flushing data device fails
xfs: only remap the written blocks in xfs_reflink_end_cow_extent
XFS: Update MAINTAINERS to catch all XFS documentation
xfs: abort intent items when recovery intents fail
xfs: factor out xfs_defer_pending_abort
|
|
Add a new `W:` field of the EROFS entry points to the documentation
site at <https://erofs.docs.kernel.org>.
In addition, update the in-tree documentation and Kconfig too.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231117085329.1624223-1-hsiangkao@linux.alibaba.com
|
|
The netdev subsystem has had a subsystem process document for a while
now. Link it appropriately in MAINTAINERS with the P: tag.
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from BPF and netfilter.
Current release - regressions:
- core: fix undefined behavior in netdev name allocation
- bpf: do not allocate percpu memory at init stage
- netfilter: nf_tables: split async and sync catchall in two
functions
- mptcp: fix possible NULL pointer dereference on close
Current release - new code bugs:
- eth: ice: dpll: fix initial lock status of dpll
Previous releases - regressions:
- bpf: fix precision backtracking instruction iteration
- af_unix: fix use-after-free in unix_stream_read_actor()
- tipc: fix kernel-infoleak due to uninitialized TLV value
- eth: bonding: stop the device in bond_setup_by_slave()
- eth: mlx5:
- fix double free of encap_header
- avoid referencing skb after free-ing in drop path
- eth: hns3: fix VF reset
- eth: mvneta: fix calls to page_pool_get_stats
Previous releases - always broken:
- core: set SOCK_RCU_FREE before inserting socket into hashtable
- bpf: fix control-flow graph checking in privileged mode
- eth: ppp: limit MRU to 64K
- eth: stmmac: avoid rx queue overrun
- eth: icssg-prueth: fix error cleanup on failing initialization
- eth: hns3: fix out-of-bounds access may occur when coalesce info is
read via debugfs
- eth: cortina: handle large frames
Misc:
- selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45"
* tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
macvlan: Don't propagate promisc change to lower dev in passthru
net: sched: do not offload flows with a helper in act_ct
net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors
net/mlx5e: Check return value of snprintf writing to fw_version buffer
net/mlx5e: Reduce the size of icosq_str
net/mlx5: Increase size of irq name buffer
net/mlx5e: Update doorbell for port timestamping CQ before the software counter
net/mlx5e: Track xmit submission to PTP WQ after populating metadata map
net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe
net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload
net/mlx5e: Fix pedit endianness
net/mlx5e: fix double free of encap_header in update funcs
net/mlx5e: fix double free of encap_header
net/mlx5: Decouple PHC .adjtime and .adjphase implementations
net/mlx5: DR, Allow old devices to use multi destination FTE
net/mlx5: Free used cpus mask when an IRQ is released
Revert "net/mlx5: DR, Supporting inline WQE when possible"
bpf: Do not allocate percpu memory at init stage
net: Fix undefined behavior in netdev name allocation
dt-bindings: net: ethernet-controller: Fix formatting error
...
|
|
Maurice is no longer with Intel and his e-mail address is no longer
active. Remove the stale entry from Slim boot loader section.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20231102195218.143440-1-jithu.joseph@intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
I am retiring from Red Hat and will no longer be a maintainer of the
gfs2 file system.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add record for TI Industrial Communication Subsystem - Gigabit (ICSSG)
Ethernet driver.
Also add Roger and myself as maintainer.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Assumes that all XFS documentation will be prefixed with xfs-, which
seems like a good policy anyway.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- removed AR7 platform support
- cleanups and fixes
* tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: AR7: remove platform
watchdog: ar7_wdt: remove driver to prepare for platform removal
vlynq: remove bus driver
mtd: parsers: ar7: remove support
serial: 8250: remove AR7 support
arch: mips: remove ReiserFS from defconfig
MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h>
MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning
MIPS: KVM: Fix a build warning about variable set but not used
MIPS: Remove dead code in relocate_new_kernel
mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2
mips: dts: ralink: mt7621: define each reset as an item
mips: dts: ingenic: Remove unneeded probe-type properties
MIPS: loongson32: Remove dma.h and nand.h
|
|
Grygorii is no longer associated with TI and messages addressed to
him bounce.
Add Siddharth, Roger and myself as reviewers.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mailman-2 system behind lists.linux[-]foundation.org is being
retired, so the lists are being migrated to lists.linux.dev.
Since both domains belong to LF and setting up proper forwards is
possible, the old addresses will continue to work for a while, but all
new patches should be sent to the new canonical addresses for each list.
Signed-off-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull more drm updates from Dave Airlie:
"Geert pointed out I missed the renesas reworks in my main pull, so
this pull contains the renesas next work for atomic conversion and DT
support.
It also contains a bunch of amdgpu and some small ssd13xx fixes.
renesas:
- atomic conversion
- DT support
ssd13xx:
- dt binding fix for ssd132x
- Initialize ssd130x crtc_state to NULL.
amdgpu:
- Fix RAS support check
- RAS fixes
- MES fixes
- SMU13 fixes
- Contiguous memory allocation fix
- BACO fixes
- GPU reset fixes
- Min power limit fixes
- GFX11 fixes
- USB4/TB hotplug fixes
- ARM regression fix
- GFX9.4.3 fixes
- KASAN/KCSAN stack size check fixes
- SR-IOV fixes
- SMU14 fixes
- PSP13 fixes
- Display blend fixes
- Flexible array size fixes
amdkfd:
- GPUVM fix
radeon:
- Flexible array size fixes"
* tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm: (83 commits)
drm/amd/display: Enable fast update on blendTF change
drm/amd/display: Fix blend LUT programming
drm/amd/display: Program plane color setting correctly
drm/amdgpu: Query and report boot status
drm/amdgpu: Add psp v13 function to query boot status
drm/amd/swsmu: remove fw version check in sw_init.
drm/amd/swsmu: update smu v14_0_0 driver if and metrics table
drm/amdgpu: Add C2PMSG_109/126 reg field shift/masks
drm/amdgpu: Optimize the asic type fix code
drm/amdgpu: fix GRBM read timeout when do mes_self_test
drm/amdgpu: check recovery status of xgmi hive in ras_reset_error_count
drm/amd/pm: only check sriov vf flag once when creating hwmon sysfs
drm/amdgpu: Attach eviction fence on alloc
drm/amdkfd: Improve amdgpu_vm_handle_moved
drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2
drm/amd/display: Avoid NULL dereference of timing generator
drm/amdkfd: Update cache info for GFX 9.4.3
drm/amdkfd: Populate cache info for GFX 9.4.3
drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64
drm/amdgpu/smu13: drop compute workload workaround
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fanotify fsid updates from Christian Brauner:
"This work is part of the plan to enable fanotify to serve as a drop-in
replacement for inotify. While inotify is availabe on all filesystems,
fanotify currently isn't.
In order to support fanotify on all filesystems two things are needed:
(1) all filesystems need to support AT_HANDLE_FID
(2) all filesystems need to report a non-zero f_fsid
This contains (1) and allows filesystems to encode non-decodable file
handlers for fanotify without implementing any exportfs operations by
encoding a file id of type FILEID_INO64_GEN from i_ino and
i_generation.
Filesystems that want to opt out of encoding non-decodable file ids
for fanotify that don't support NFS export can do so by providing an
empty export_operations struct.
This also partially addresses (2) by generating f_fsid for simple
filesystems as well as freevxfs. Remaining filesystems will be dealt
with by separate patches.
Finally, this contains the patch from the current exportfs maintainers
which moves exportfs under vfs with Chuck, Jeff, and Amir as
maintainers and vfs.git as tree"
* tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
MAINTAINERS: create an entry for exportfs
fs: fix build error with CONFIG_EXPORTFS=m or not defined
freevxfs: derive f_fsid from bdev->bd_dev
fs: report f_fsid from s_dev for "simple" filesystems
exportfs: support encoding non-decodeable file handles by default
exportfs: define FILEID_INO64_GEN* file handle types
exportfs: make ->encode_fh() a mandatory method for NFS export
exportfs: add helpers to check if filesystem can encode/decode file handles
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap maintainership rotation from Christian Brauner:
"As discussed on list last week this makes fs/iomap part of vfs.git
with Darrick as main reviewer"
* tag 'vfs-6.7.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: rename iomap entry
iomap: rotate maintainers
|
|
Split the exportfs entry from the nfsd entry and add myself as reviewer.
Suggested-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231026205553.143556-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since this is now part of the vfs trees rename it accordingly and remove
the old tree referencing xfs.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
|
|
Pull virtio updates from Michael Tsirkin:
"vhost,virtio,vdpa: features, fixes, cleanups.
vdpa/mlx5:
- VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
- new maintainer
vdpa:
- support for vq descriptor mappings
- decouple reset of iotlb mapping from device reset
and fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
vdpa_sim: implement .reset_map support
vdpa/mlx5: implement .reset_map driver op
vhost-vdpa: clean iotlb map during reset for older userspace
vdpa: introduce .compat_reset operation callback
vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
vhost-vdpa: reset vendor specific mapping to initial state in .release
vdpa: introduce .reset_map operation callback
virtio_pci: add check for common cfg size
virtio-blk: fix implicit overflow on virtio_max_dma_size
virtio_pci: add build offset check for the new common cfg items
virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
vduse: make vduse_class constant
vhost-scsi: Spelling s/preceeding/preceding/g
virtio: kdoc for struct virtio_pci_modern_device
vdpa: Update sysfs ABI documentation
MAINTAINERS: Add myself as mlx5_vdpa driver
virtio-balloon: correct the comment of virtballoon_migratepage()
mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
vdpa/mlx5: Update cvq iotlb mapping on ASID change
vdpa/mlx5: Make iotlb helper functions more generic
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has largely driver updates for 6.7, i.e. feature additions (like
adding transfers while in atomic mode), using new helpers (like
devm_clk_get_enabled), new IDs, documentation fixes and additions...
you name it.
The core got a memleak fix and better support for nested muxes"
* tag 'i2c-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
i2c: s3c2410: make i2c_s3c_irq_nextbyte() void
i2c: qcom-geni: add ACPI device id for sc8180x
Documentation: i2c: add fault code for not supporting 10 bit addresses
i2c: sun6i-p2wi: Prevent potential division by zero
i2c: mux: demux-pinctrl: Convert to use sysfs_emit_at() API
i2c: i801: Use new helper acpi_use_parent_companion
ACPI: Add helper acpi_use_parent_companion
MAINTAINERS: add YAML file for i2c-demux-pinctrl
i2c: core: fix lockdep warning for sparsely nested adapter chain
i2c: axxia: eliminate kernel-doc warnings
dt-bindings: i2c: i2c-demux-pinctrl: Convert to json-schema
i2c: stm32f7: Use devm_clk_get_enabled()
i2c: stm32f4: Use devm_clk_get_enabled()
i2c: stm32f7: add description of atomic in struct stm32f7_i2c_dev
i2c: fix memleak in i2c_new_client_device()
i2c: exynos5: Calculate t_scl_l, t_scl_h according to i2c spec
i2c: i801: Simplify class-based client device instantiation
i2c: exynos5: add support for atomic transfers
i2c: at91-core: Use devm_clk_get_enabled()
eeprom: at24: add ST M24C64-D Additional Write lockable page support
...
|
|
Pull CXL (Compute Express Link) updates from Dan Williams:
"The main new functionality this time is work to allow Linux to
natively handle CXL link protocol errors signalled via PCIe AER for
current generation CXL platforms. This required some enlightenment of
the PCIe AER core to workaround the fact that current generation RCH
(Restricted CXL Host) platforms physically hide topology details and
registers via a mechanism called RCRB (Root Complex Register Block).
The next major highlight is reworks to address bugs in parsing region
configurations for next generation VH (Virtual Host) topologies. The
old broken algorithm is replaced with a simpler one that significantly
increases the number of region configurations supported by Linux. This
is again relevant for error handling so that forward and reverse
address translation of memory errors can be carried out by Linux for
memory regions instantiated by platform firmware.
As for other cross-tree work, the ACPI table parsing code has been
refactored for reuse parsing the "CDAT" structure which is an
ACPI-like data structure that is reported by CXL devices. That work is
in preparation for v6.8 support for CXL QoS. Think of this as dynamic
generation of NUMA node topology information generated by Linux rather
than platform firmware.
Lastly, a number of internal object lifetime issues have been resolved
along with misc. fixes and feature updates (decoders_committed sysfs
ABI).
Summary:
- Add support for RCH (Restricted CXL Host) Error recovery
- Fix several region assembly bugs
- Fix mem-device lifetime issues relative to the sanitize command and
RCH topology.
- Refactor ACPI table parsing for CDAT parsing re-use in preparation
for CXL QOS support"
* tag 'cxl-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (50 commits)
lib/fw_table: Remove acpi_parse_entries_array() export
cxl/pci: Change CXL AER support check to use native AER
cxl/hdm: Remove broken error path
cxl/hdm: Fix && vs || bug
acpi: Move common tables helper functions to common lib
cxl: Add support for reading CXL switch CDAT table
cxl: Add checksum verification to CDAT from CXL
cxl: Export QTG ids from CFMWS to sysfs as qos_class attribute
cxl: Add decoders_committed sysfs attribute to cxl_port
cxl: Add cxl_decoders_committed() helper
cxl/core/regs: Rework cxl_map_pmu_regs() to use map->dev for devm
cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
PCI/AER: Unmask RCEC internal errors to enable RCH downstream port error handling
PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem dev handler
cxl/pci: Disable root port interrupts in RCH mode
cxl/pci: Add RCH downstream port error logging
cxl/pci: Map RCH downstream AER registers for logging protocol errors
cxl/pci: Update CXL error logging to use RAS register address
PCI/AER: Refactor cper_print_aer() for use by CXL driver module
cxl/pci: Add RCH downstream port AER register discovery
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux
Pull unified attestation reporting from Dan Williams:
"In an ideal world there would be a cross-vendor standard attestation
report format for confidential guests along with a common device
definition to act as the transport.
In the real world the situation ended up with multiple platform
vendors inventing their own attestation report formats with the
SEV-SNP implementation being a first mover to define a custom
sev-guest character device and corresponding ioctl(). Later, this
configfs-tsm proposal intercepted an attempt to add a tdx-guest
character device and a corresponding new ioctl(). It also anticipated
ARM and RISC-V showing up with more chardevs and more ioctls().
The proposal takes for granted that Linux tolerates the vendor report
format differentiation until a standard arrives. From talking with
folks involved, it sounds like that standardization work is unlikely
to resolve anytime soon. It also takes the position that kernfs ABIs
are easier to maintain than ioctl(). The result is a shared configfs
mechanism to return per-vendor report-blobs with the option to later
support a standard when that arrives.
Part of the goal here also is to get the community into the
"uncomfortable, but beneficial to the long term maintainability of the
kernel" state of talking to each other about their differentiation and
opportunities to collaborate. Think of this like the device-driver
equivalent of the common memory-management infrastructure for
confidential-computing being built up in KVM.
As for establishing an "upstream path for cross-vendor
confidential-computing device driver infrastructure" this is something
I want to discuss at Plumbers. At present, the multiple vendor
proposals for assigning devices to confidential computing VMs likely
needs a new dedicated repository and maintainer team, but that is a
discussion for v6.8.
For now, Greg and Thomas have acked this approach and this is passing
is AMD, Intel, and Google tests.
Summary:
- Introduce configfs-tsm as a shared ABI for confidential computing
attestation reports
- Convert sev-guest to additionally support configfs-tsm alongside
its vendor specific ioctl()
- Added signed attestation report retrieval to the tdx-guest driver
forgoing a new vendor specific ioctl()
- Misc cleanups and a new __free() annotation for kvfree()"
* tag 'tsm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux:
virt: tdx-guest: Add Quote generation support using TSM_REPORTS
virt: sevguest: Add TSM_REPORTS support for SNP_GET_EXT_REPORT
mm/slab: Add __free() support for kvfree
virt: sevguest: Prep for kernel internal get_ext_report()
configfs-tsm: Introduce a shared ABI for attestation reports
virt: coco: Add a coco/Makefile and coco/Kconfig
virt: sevguest: Fix passing a stack buffer as a scatterlist target
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Implement the binary search in modpost for faster symbol lookup
- Respect HOSTCC when linking host programs written in Rust
- Change the binrpm-pkg target to generate kernel-devel RPM package
- Fix endianness issues for tee and ishtp MODULE_DEVICE_TABLE
- Unify vdso_install rules
- Remove unused __memexit* annotations
- Eliminate stale whitelisting for __devinit/__devexit from modpost
- Enable dummy-tools to handle the -fpatchable-function-entry flag
- Add 'userldlibs' syntax
* tag 'kbuild-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: support 'userldlibs' syntax
kbuild: dummy-tools: pretend we understand -fpatchable-function-entry
kbuild: Correct missing architecture-specific hyphens
modpost: squash ALL_{INIT,EXIT}_TEXT_SECTIONS to ALL_TEXT_SECTIONS
modpost: merge sectioncheck table entries regarding init/exit sections
modpost: use ALL_INIT_SECTIONS for the section check from DATA_SECTIONS
modpost: disallow the combination of EXPORT_SYMBOL and __meminit*
modpost: remove EXIT_SECTIONS macro
modpost: remove MEM_INIT_SECTIONS macro
modpost: remove more symbol patterns from the section check whitelist
modpost: disallow *driver to reference .meminit* sections
linux/init: remove __memexit* annotations
modpost: remove ALL_EXIT_DATA_SECTIONS macro
kbuild: simplify cmd_ld_multi_m
kbuild: avoid too many execution of scripts/pahole-flags.sh
kbuild: remove ARCH_POSTLINK from module builds
kbuild: unify no-compiler-targets and no-sync-config-targets
kbuild: unify vdso_install rules
docs: kbuild: add INSTALL_DTBS_PATH
UML: remove unused cmd_vdso_install
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
- Big pile of __counted_by attribute annotations to several structures
for bounds checking of flexible arrays at run-time
- Another big pile platform remove callback returning void changes
- Device tree device_get_match_data() usage and dropping
of_match_device() calls
- Minor driver updates to pxa, idxd fsl, hisi etc drivers
* tag 'dmaengine-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (106 commits)
dmaengine: stm32-mdma: correct desc prep when channel running
dmaengine: dw-axi-dmac: Add support DMAX_NUM_CHANNELS > 16
dmaengine: xilinx: xilinx_dma: Fix kernel doc about xilinx_dma_remove()
dmaengine: mmp_tdma: drop unused variable 'of_id'
MAINTAINERS: Add entries for NXP(Freescale) eDMA drivers
dmaengine: xilinx: xdma: Support cyclic transfers
dmaengine: xilinx: xdma: Prepare the introduction of cyclic transfers
dmaengine: Drop unnecessary of_match_device() calls
dmaengine: Use device_get_match_data()
dmaengine: pxa_dma: Annotate struct pxad_desc_sw with __counted_by
dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc()
dmaengine: xilinx: xdma: Use resource_size() in xdma_probe()
dmaengine: fsl-dpaa2-qdma: Remove redundant initialization owner in dpaa2_qdma_driver
dmaengine: Remove unused declaration dma_chan_cleanup()
dmaengine: mmp: fix Wvoid-pointer-to-enum-cast warning
dmaengine: qcom: fix Wvoid-pointer-to-enum-cast warning
dmaengine: fsl-edma: Remove redundant dev_err() for platform_get_irq()
dmaengine: ep93xx_dma: Annotate struct ep93xx_dma_engine with __counted_by
dmaengine: idxd: add wq driver name support for accel-config user tool
dmaengine: fsl-edma: Annotate struct struct fsl_edma_engine with __counted_by
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 6.7-rc1. A bit
bigger than 6.6 this time around, as it coincided with the Outreachy
and mentorship application process, so we got a bunch of new
developers sending in their first changes, which is nice to see.
Also in here is a removal of the qlge ethernet driver, and the
rtl8192u wireless driver. Both of these were very old and no one was
maintaining them, the wireless driver removal was due to no one using
it anymore, and no hardware to be found, and is part of a larger
effort to remove unused and old wifi drivers from the system.
The qlge ethernet driver did have one user pop up after it was
dropped, and we are working with the network mainainers to figure out
what tree it will come back in from and who will be responsible for
it, and if it really is being used or not. Odds are it will show up in
a network subsystem pull request after -rc1 is out, but we aren't sure
yet.
Other smaller changes in here are:
- Lots of vc04_services work by Umang to clean up the mess created by
the rpi developers long ago, bringing it almost into good enough
shape to get out of staging, hopefully next major release, it's
getting close.
- rtl8192e variable cleanups and removal of unused code and
structures
- vme_user coding style cleanups
- other small coding style cleanups to lots of the staging drivers
- octeon typedef removals, and then last-minute revert when it was
found to break the build in some configurations (it's a hard driver
to build properly, none of the normal automated testing catches
it.)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits)
Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t"
Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t"
Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t"
Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t"
staging: vt6655: Type encoding info dropped from variable name "byRxRate"
staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF"
staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF"
staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType"
staging: vt6655: Type encoding info dropped from variable name "byPacketType"
staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter"
staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime"
staging: vt6655: Type encoding info dropped from variable name "pbyTxRate"
staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter"
staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff"
staging: fbtft: Convert to platform remove callback returning void
staging: olpc_dcon: Remove I2C_CLASS_DDC support
staging: vc04_services: use snprintf instead of sprintf
staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx]
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
|
|
Add myself as Intel TDX maintainer.
I drove upstreaming most of TDX code so far and I will continue
working on TDX for foreseeable future.
[ dhansen: * Add myself as a reviewer too
* Swap Maintained=>Supported. I double
checked Kirill is still being paid
* Add drivers/virt/coco/tdx-guest ]
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20231101233314.2567-1-kirill.shutemov%40linux.intel.com
|
|
Pull bitmap updates from Yury Norov:
"This includes the 'bitmap: cleanup bitmap_*_region() implementation'
series, and scattered cleanup patches"
* tag 'bitmap-for-6.7' of https://github.com/norov/linux:
buildid: reduce header file dependencies for module
bitmap: move bitmap_*_region() functions to bitmap.h
bitmap: drop _reg_op() function
bitmap: replace _reg_op(REG_OP_ISFREE) with find_next_bit()
bitmap: replace _reg_op(REG_OP_RELEASE) with bitmap_clear()
bitmap: replace _reg_op(REG_OP_ALLOC) with bitmap_set()
bitmap: fix opencoded bitmap_allocate_region()
bitmap: add test for bitmap_*_region() functions
bitmap: align __reg_op() wrappers with modern coding style
lib/bitmap: split-out string-related operations to a separate files
bitmap: Remove dead code, i.e. bitmap_copy_le()
bitmap: Fix a typo ("identify map")
cpumask: kernel-doc cleanups and additions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add virtual-address based lskcipher interface
- Optimise ahash/shash performance in light of costly indirect calls
- Remove ahash alignmask attribute
Algorithms:
- Improve AES/XTS performance of 6-way unrolling for ppc
- Remove some uses of obsolete algorithms (md4, md5, sha1)
- Add FIPS 202 SHA-3 support in pkcs1pad
- Add fast path for single-page messages in adiantum
- Remove zlib-deflate
Drivers:
- Add support for S4 in meson RNG driver
- Add STM32MP13x support in stm32
- Add hwrng interface support in qcom-rng
- Add support for deflate algorithm in hisilicon/zip"
* tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits)
crypto: adiantum - flush destination page before unmapping
crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place
Documentation/module-signing.txt: bring up to date
module: enable automatic module signing with FIPS 202 SHA-3
crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures
crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support
crypto: FIPS 202 SHA-3 register in hash info for IMA
x509: Add OIDs for FIPS 202 SHA-3 hash and signatures
crypto: ahash - optimize performance when wrapping shash
crypto: ahash - check for shash type instead of not ahash type
crypto: hash - move "ahash wrapping shash" functions to ahash.c
crypto: talitos - stop using crypto_ahash::init
crypto: chelsio - stop using crypto_ahash::init
crypto: ahash - improve file comment
crypto: ahash - remove struct ahash_request_priv
crypto: ahash - remove crypto_ahash_alignmask
crypto: gcm - stop using alignmask of ahash
crypto: chacha20poly1305 - stop using alignmask of ahash
crypto: ccm - stop using alignmask of ahash
net: ipv6: stop checking crypto_ahash_alignmask
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
scsi_debug) plus the usual assorted minor fixes and updates.
The major change this time around is a prep patch for rethreading of
the driver reset handler API not to take a scsi_cmd structure which
starts to reduce various drivers' dependence on scsi_cmd in error
handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
scsi: ufs: core: Leave space for '\0' in utf8 desc string
scsi: ufs: core: Conversion to bool not necessary
scsi: ufs: core: Fix race between force complete and ISR
scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
scsi: aic79xx: Fix up NULL command in ahd_done()
scsi: message: fusion: Initialize return value in mptfc_bus_reset()
scsi: mpt3sas: Fix loop logic
scsi: snic: Remove useless code in snic_dr_clean_pending_req()
scsi: core: Add comment to target_destroy in scsi_host_template
scsi: core: Clean up scsi_dev_queue_ready()
scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
scsi: target: core: Fix kernel-doc comment
scsi: pmcraid: Fix kernel-doc comment
scsi: core: Handle depopulation and restoration in progress
scsi: ufs: core: Add support for parsing OPP
scsi: ufs: core: Add OPP support for scaling clocks and regulators
scsi: ufs: dt-bindings: common: Add OPP table
scsi: scsi_debug: Add param to control sdev's allow_restart
scsi: scsi_debug: Add debugfs interface to fail target reset
scsi: scsi_debug: Add new error injection type: Reset LUN failed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization.
Other than that, there have little change wrt API, rather lots of
driver-specific updates and fixes.
Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list"
* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
ALSA: hda: cs35l41: mark cs35l41_verify_id() static
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
ASoC: soc-dai: add flag to mute and unmute stream during trigger
ASoC: ams-delta.c: use component after check
ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
ASoC: codecs: aw88399: fix typo in Kconfig select
ASoC: amd: acp: add ACPI dependency
ASoC: Intel: avs: Add rt5514 machine board
ASoC: Intel: avs: Add rt5514 machine board
ALSA: scarlett2: Add missing check with firmware version control
ALSA: virtio: use ack callback
ALSA: scarlett2: Remap Level Meter values
ALSA: scarlett2: Allow passing any output to line_out_remap()
ALSA: scarlett2: Add support for reading firmware version
ALSA: scarlett2: Rename Gen 3 config sets
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
ALSA: hda: cs35l41: Check CSPL state after loading firmware
ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
evaluation to learn device characteristics (Andy Shevchenko)
- Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
definition (Ilpo Järvinen)
- Simplify config access error checking in various drivers (Ilpo
Järvinen)
- Use pcie_capability_clear_word() (not
pcie_capability_clear_and_set_word()) when only clearing (Ilpo
Järvinen)
- Add pci_get_base_class() to simplify finding devices using base
class only (ignoring subclass and programming interface) (Sui
Jingfeng)
- Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
devices from before the Class Code was added to PCI (Sui Jingfeng)
- Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
include ancient VGA devices (Sui Jingfeng)
Resource management:
- Make pci_assign_unassigned_resources() non-init because sparc uses
it after init (Randy Dunlap)
Driver binding:
- Retain .remove() and .probe() callbacks (previously __init) because
sysfs may cause them to be called later (Uwe Kleine-König)
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
it can be claimed by dwc3 instead (Vicki Pfau)
PCI device hotplug:
- Add Ampere Altra Attention Indicator extension driver for acpiphp
(D Scott Phillips)
Power management:
- Quirk VideoPropulsion Torrent QN16e with longer delay after reset
(Lukas Wunner)
- Prevent users from overriding drivers that say we shouldn't use
D3cold (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
because wakeup interrupts from those states don't work if amd-pmc
has put the platform in a hardware sleep state (Mario Limonciello)
IOMMU:
- Disable ATS for Intel IPU E2000 devices with invalidation message
endianness erratum (Bartosz Pawlowski)
Error handling:
- Factor out interrupt enable/disable into helpers (Kai-Heng Feng)
Peer-to-peer DMA:
- Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
ever use pagemaps with multiple entries (Gustavo A. R. Silva)
ASPM:
- Revert a change that broke when drivers disabled L1 and users later
enabled an L1.x substate via sysfs, and fix a similar issue when
users disabled L1 via sysfs (Heiner Kallweit)
Endpoint framework:
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)
Cadence PCIe controller driver:
- Drop unused "is_rc" member (Li Chen)
Freescale Layerscape PCIe controller driver:
- Enable 64-bit addressing in endpoint mode (Guanhua Gao)
Intel VMD host bridge driver:
- Fix multi-function header check (Ilpo Järvinen)
Microsoft Hyper-V host bridge driver:
- Annotate struct hv_dr_state with __counted_by (Kees Cook)
NVIDIA Tegra194 PCIe controller driver:
- Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
Shimoda)
Qualcomm PCIe controller driver:
- Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
(Manivannan Sadhasivam)
- Add a .write_dbi2() callback so DBI2 register writes, e.g., for
setting the BAR size, work correctly (Manivannan Sadhasivam)
- Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
doesn't enable ASPM states that haven't been enabled by the
firmware (Manivannan Sadhasivam)
Renesas R-Car Gen4 PCIe controller driver:
- Add DesignWare core support (set max link width, EDMA_UNROLL flag,
.pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
controller in both host and endpoint mode (Yoshihiro Shimoda)
Xilinx NWL PCIe controller driver:
- Update ECAM size to support 256 buses (Thippeswamy Havalige)
- Stop setting bridge primary/secondary/subordinate bus numbers,
since PCI core does this (Thippeswamy Havalige)
Xilinx XDMA controller driver:
- Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
Xilinx XDMA Soft IP (Thippeswamy Havalige)
Miscellaneous:
- Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
macros (Ilpo Järvinen, Bjorn Helgaas)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John
Sanpe)
- Replace unnecessary UTF-8 in Kconfig help text because menuconfig
doesn't render it correctly (Liu Song)"
* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI/AER: Factor out interrupt toggling into helpers
PCI: acpiphp: Allow built-in drivers for Attention Indicators
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set of patches has some minor fixes for message handling, some
misc cleanups, and updates the maintainers entry"
* tag 'dlm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
MAINTAINERS: Update dlm maintainer and web page
dlm: slow down filling up processing queue
dlm: fix no ack after final message
dlm: be sure we reset all nodes at forced shutdown
dlm: fix remove member after close call
dlm: fix creating multiple node structures
fs: dlm: Remove some useless memset()
fs: dlm: Fix the size of a buffer in dlm_create_debug_file()
fs: dlm: Simplify buffer size computation in dlm_create_debug_file()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"The only thing worth highligthing is that gzip moves to use vmalloc()
instead of kmalloc just as we had a fix for this for zstd on v6.6-rc1.
The rest is regular house keeping, keeping things neat, tidy, and
boring"
[ The kmalloc -> vmalloc conversion is not the right approach.
Unless you know you need huge areas or know you need to use virtual
mappings for some reason (playing with protection bits or whatever),
you should use kvmalloc()/kvfree, which automatically picks the right
allocation model - Linus ]
* tag 'modules-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Annotate struct module_notes_attrs with __counted_by
module: Fix comment typo
module: Make is_valid_name() return bool
module: Make is_mapping_symbol() return bool
module/decompress: use vmalloc() for gzip decompression workspace
MAINTAINERS: add include/linux/module*.h to modules
module: Clarify documentation of module_param_call()
|
|
Pull documentation updates from Jonathan Corbet:
"The number of commits for documentation is not huge this time around,
but there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations
- The much-discussed documentation of the confidential-computing
threat model
- Powerpc and RISCV documentation move under Documentation/arch -
these complete this particular bit of documentation churn
- A large traditional-Chinese documentation update
- A new document on backporting and conflict resolution
- Some kernel-doc and Sphinx fixes
Plus the usual smattering of smaller updates and typo fixes"
* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
scripts/kernel-doc: Fix the regex for matching -Werror flag
docs: backporting: address feedback
Documentation: driver-api: pps: Update PPS generator documentation
speakup: Document USB support
doc: blk-ioprio: Bring the doc in line with the implementation
docs: usb: fix reference to nonexistent file in UVC Gadget
docs: doc-guide: mention 'make refcheckdocs'
Documentation: fix typo in dynamic-debug howto
scripts/kernel-doc: match -Werror flag strictly
Documentation/sphinx: Remove the repeated word "the" in comments.
docs: sparse: add SPDX-License-Identifier
docs/zh_CN: Add subsystem-apis Chinese translation
docs/zh_TW: update contents for zh_TW
docs: submitting-patches: encourage direct notifications to commenters
docs: add backporting and conflict resolution document
docs: move riscv under arch
docs: update link to powerpc/vmemmap_dedup.rst
mm/memory-hotplug: fix typo in documentation
docs: move powerpc under arch
PCI: Update the devres documentation regarding to pcim_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Cleanups:
- kprobes: Fixes typo in kprobes samples
- tracing/eprobes: Remove 'break' after return
kretprobe/fprobe performance improvements:
- lib: Introduce new `objpool`, which is a high performance lockless
object queue. This uses per-cpu ring array to allocate/release
objects from the pre-allocated object pool.
Since the index of ring array is a 32bit sequential counter, we can
retry to push/pop the object pointer from the ring without lock (as
seq-lock does)
- lib: Add an objpool test module to test the functionality and
evaluate the performance under some circumstances
- kprobes/fprobe: Improve kretprobe and rethook scalability
performance with objpool.
This improves both legacy kretprobe and fprobe exit handler (which
is based on rethook) to be scalable on SMP systems. Even with
8-threads parallel test, it shows a great scalability improvement
- Remove unneeded freelist.h which is replaced by objpool
- objpool: Add maintainers entry for the objpool
- objpool: Fix to remove unused include header lines"
* tag 'probes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: unused header files removed
MAINTAINERS: objpool added
kprobes: freelist.h removed
kprobes: kretprobe scalability improvement
lib: objpool test module added
lib: objpool added: ring-array based lockless MPMC
tracing/eprobe: drop unneeded breaks
samples: kprobes: Fixes a typo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into drm-next
drm: renesas: shmobile: Atomic conversion + DT support
Currently, there are two drivers for the LCD controller on Renesas
SuperH-based and ARM-based SH-Mobile and R-Mobile SoCs:
1. sh_mobile_lcdcfb, using the fbdev framework,
2. shmob_drm, using the DRM framework.
However, only the former driver is used, as all platform support
integrates the former. None of these drivers support DT-based systems.
Convert the SH-Mobile DRM driver to atomic modesetting, and add DT
support, complemented by the customary set of fixes and improvements.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/cover.1694767208.git.geert+renesas@glider.be/
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patchwork.freedesktop.org/patch/msgid/CAMuHMdUF61V5qNyKbrTGxZfEJvCVuLO7q2R5MqZYkzRC_cNr0w@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
Pull ARM SoC code updates from Arnd Bergmann:
"The AMD Pensando DPU platform gets added to arm64, and some minor
updates make it into Renesas' 32-bit platforms"
* tag 'soc-arm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm: debug: reuse the config DEBUG_OMAP2UART{1,2} for OMAP{3,4,5}
arm64: Add config for AMD Pensando SoC platforms
MAINTAINERS: Add entry for AMD PENSANDO
ARM: shmobile: sh73a0: Reserve boot area when SMP is enabled
ARM: shmobile: r8a7779: Reserve boot area when SMP is enabled
ARM: shmobile: rcar-gen2: Reserve boot area when SMP is enabled
ARM: shmobile: rcar-gen2: Remove unneeded once handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
|
|
Pull SoC DT updates from Arnd Bergmann:
"There are a couple new SoCs that are supported for the first time:
- AMD Pensando Elba is a data processing unit based on Cortex-A72 CPU
cores
- Sophgo makes RISC-V based chips, and we now support the CV1800B
chip used in the milkv-duo board and the massive sg2042 chip in the
milkv-pioneer, a 64-core developer workstation.
- Qualcomm Snapdragon 720G (sm7125) is a close relative of Snapdragon
7c and gets added with some Xiaomi phones
- Renesas gains support for the R8A779F4 (R-Car S4-8) automotive SoC
and the RZ/G3S (R9A08G045) embedded SoC.
There are also a bunch of newly supported machines that use already
supported chips. On the 32-bit side, we have:
- USRobotics USR8200 is a NAS/Firewall/router based on the ancient
Intel IXP4xx platform
- A couple of machines based on the NXP i.MX5 and i.MX6 platforms
- One machine each for Allwinner V3s, Aspeed AST2600, Microchip
sama5d29 and ST STM32mp157
The other ones all use arm64 cores on chips from allwinner, amlogic,
freescale, mediatek, qualcomm and rockchip"
* tag 'soc-dt-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (641 commits)
ARM: dts: BCM5301X: Set switch ports for Linksys EA9200
ARM: dts: BCM5301X: Set fixed-link for extra Netgear R8000 CPU ports
ARM: dts: BCM5301X: Explicitly disable unused switch CPU ports
ARM: dts: BCM5301X: Relicense Vivek's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense Felix's code to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Set MAC address for Asus RT-AC87U
arm64: dts: socionext: add missing cache properties
riscv: dts: thead: convert isa detection to new properties
arm64: dts: Update cache properties for socionext
arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports
arm64: dts: ti: k3-am654-icssg2: add ICSSG2 Ethernet support
arm64: dts: ti: k3-am65-main: Add ICSSG IEP nodes
arm64: dts: ti: k3-am62p5-sk: Updates for SK EVM
arm64: dts: ti: k3-am62p: Add nodes for more IPs
arm64: dts: rockchip: Add Turing RK1 SoM support
dt-bindings: arm: rockchip: Add Turing RK1
dt-bindings: vendor-prefixes: add turing
arm64: dts: rockchip: Add DFI to rk3588s
arm64: dts: rockchip: Add DFI to rk356x
arm64: dts: rockchip: Always enable DFI on rk3399
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
- Move Kconfig files into the pmdomain subsystem
- Drop use of genpd's redundant ->opp_to_performance_state() callback
- amlogic:
- Add support for the T7 power-domains controller
- Fix mask for the second NNA mem power-domain
- bcm: Fixup ASB register read and comparison for bcm2835-power
- imx: Fix device link problem for consumers of the pgc power-domain
- mediatek: Add support for the MT8365 power domains
- qcom:
- Add support for the rpmhpds for SC8380XP power-domains
- Add support for the rpmhpds for SM8650 power-domains
- Add support for the rpmhpd clocks for SM7150
- Add support for the rpmpds for MSM8917 (families) power-domains
- starfive: Add support for the JH7110 AON PMU
* tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits)
pmdomain: amlogic: Fix mask for the second NNA mem PD domain
pmdomain: qcom: rpmhpd: Add SC8380XP power domains
pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains
dt-bindings: power: rpmpd: Add SC8380XP support
dt-bindings: power: qcom,rpmhpd: Add GMXC PD index
dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains
pmdomain: imx: Make imx pgc power domain also set the fwnode
pmdomain: qcom: rpmpd: Add QM215 power domains
pmdomain: qcom: rpmpd: Add MSM8917 power domains
dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215
pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable
pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback
pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback
pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback
pmdomain: Use device_get_match_data()
pmdomain: ti: add missing of_node_put
pmdomain: mediatek: Add support for MT8365
pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap
pmdomain: mediatek: Add support for WAY_EN operations
pmdomain: mediatek: Unify configuration for infracfg and smi
...
|
|
Pull MMC updates from Ulf Hansson:
" MMC core:
- Enable host caps to be modified via debugfs to test speed-modes
- Improve random I/O writes for 4k buffers for hsq enabled hosts
MMC host:
- atmel-mci/sdhci-of-at91: Aubin Constans takes over as maintainer
- dw_mmc-starfive: Re-work tuning support
- meson-gx: Fix bogus IRQ when using CMD_CFG_ERROR
- mmci: Use peripheral flow control for the STM32 variant
- renesas,sdhi: Add support for the RZ/G3S variant
- sdhci-esdhc-imx: Optimize the manual tuning logic
- sdhci-msm: Add support for the SM8650 variant
- sdhci-npcm: Add driver to support the Nuvoton NPCM BMC variant
- sdhci-pci-gli: Add workaround to allow GL9750 to enter ASPM L1.2"
* tag 'mmc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
dt-bindings: mmc: sdhci-msm: document the SM8650 SDHCI Controller
mmc: meson-gx: Remove setting of CMD_CFG_ERROR
MAINTAINERS: mmc: take over as maintainer of MCI & SDHCI MICROCHIP DRIVERS
mmc: jz4740: Use device_get_match_data()
mmc: sdhci-npcm: Add NPCM SDHCI driver
dt-bindings: mmc: npcm,sdhci: Document NPCM SDHCI controller
mmc: sdhci-pltfm: Make driver OF independent
mmc: sdhci-pltfm: Drop unnecessary error messages in sdhci_pltfm_init()
mmc: sdhci-pci: Switch to use acpi_evaluate_dsm_typed()
mmc: debugfs: Allow host caps to be modified
mmc: core: Always reselect card type
mmc: mmci: use peripheral flow control for STM32
mmc: vub300: replace deprecated strncpy with strscpy
memstick: jmb38x_ms: Annotate struct jmb38x_ms with __counted_by
mmc: starfive: Change tuning implementation
dt-bindings: mmc: starfive: Remove properties from required
mmc: hsq: Improve random I/O write performance for 4k buffers
mmc: core: Allow dynamical updates of the number of requests for hsq
mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2
dt-bindings: mmc: renesas,sdhi: Document RZ/G3S support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Update DM core to directly call the map function for both the linear
and stripe targets; which are provided by DM core
- Various updates to use new safer string functions
- Update DM core to respect REQ_NOWAIT flag in normal bios so that
memory allocations are always attempted with GFP_NOWAIT
- Add Mikulas Patocka to MAINTAINERS as a DM maintainer!
- Improve DM delay target's handling of short delays (< 50ms) by using
a kthread to check expiration of IOs rather than timers and a wq
- Update the DM error target so that it works with zoned storage. This
helps xfstests to provide proper IO error handling coverage when
testing a filesystem with native zoned storage support
- Update both DM crypt and integrity targets to improve performance by
using crypto_shash_digest() rather than init+update+final sequence
- Fix DM crypt target by backfilling missing memory allocation
accounting for compound pages
* tag 'for-6.7/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: account large pages in cc->n_allocated_pages
dm integrity: use crypto_shash_digest() in sb_mac()
dm crypt: use crypto_shash_digest() in crypt_iv_tcw_whitening()
dm error: Add support for zoned block devices
dm delay: for short delays, use kthread instead of timers and wq
MAINTAINERS: add Mikulas Patocka as a DM maintainer
dm: respect REQ_NOWAIT flag in normal bios issued to DM
dm: enhance alloc_multiple_bios() to be more versatile
dm: make __send_duplicate_bios return unsigned int
dm log userspace: replace deprecated strncpy with strscpy
dm ioctl: replace deprecated strncpy with strscpy_pad
dm crypt: replace open-coded kmemdup_nul
dm cache metadata: replace deprecated strncpy with strscpy
dm: shortcut the calls to linear_map and stripe_map
|
|
Use glob include/linux/module*.h to capture all module changes.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
|
|
Per a discussion last week, let's improve coordination between fs/iomap/
and the rest of the VFS by shifting Christian into the role of git tree
maintainer. I'll stay on as reviewer and main developer, which will
free up some more time to clean up the code base a bit and help
filesystem maintainers port off of bufferheads and onto iomap.
Link: https://lore.kernel.org/linux-fsdevel/20231026-gehofft-vorfreude-a5079bff7373@brauner/
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20231031234820.GB1205221@frogsfrogsfrogs
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As Eli Cohen moved to other work, I'll be the contact point for
mlx5_vdpa.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20230925160654.1558627-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add a kselftest to check for unprobed DT devices
- Fix address translation for some 3 address cells cases
- Refactor firmware node refcounting for AMBA bus
- Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and
Freescale QMC HDLC
- Add Marantec vendor prefix
- Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt, and
atmel,at91rm9200-wdt bindings to DT schema
- Several additionalProperties/unevaluatedProperties on child node
schemas fixes
- Drop reserved-memory bindings which now live in dtschema project
- Fix a reference to rockchip,inno-usb2phy.yaml
- Remove backlight nodes from display panel examples
- Expand example for using DT_SCHEMA_FILES
- Merge simple LVDS panel bindings to one binding doc
* tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name
dt-bindings: arm,coresight-cti: Add missing additionalProperties on child nodes
dt-bindings: arm,coresight-cti: Drop type for 'cpu' property
dt-bindings: soundwire: Add reference to soundwire-controller.yaml schema
dt-bindings: input: syna,rmi4: Make "additionalProperties: true" explicit
media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias"
dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
of: overlay: unittest: overlay_bad_unresolved: Spelling s/ok/okay/
of: address: Consolidate bus .map() functions
of: address: Store number of bus flag cells rather than bool
of: unittest: Add tests for address translations
of: address: Remove duplicated functions
of: address: Fix address translation when address-size is greater than 2
dt-bindings: watchdog: cnxt,cx92755-wdt: convert txt to yaml
dt-bindings: watchdog: da9062-wdt: convert txt to yaml
dt-bindings: watchdog: fsl,scu-wdt: Document imx8dl
dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml
dt-bindings: usb: rockchip,dwc3: update inno usb2 phy binding name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Core changes:
- propagate of_node to child device
- change from atomic to blocking notifier_call_chain
New drivers:
- pm8916 battery management system
- mm8013 fuel gauge
New features:
- maxim max17040: add temperature support
- gpio-poweroff: make priority configurable
Cleanups:
- simplify reset drivers using builtin_platform_driver()
- convert all platform drivers to remove_new callback
- replace all strncpy occurrences with strscpy
- started converting drivers to i2c_get_match_data()
- misc fixes and cleanups"
* tag 'for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (91 commits)
power: reset: vexpress: Use device_get_match_data()
power: supply: surface-charger: replace deprecated strncpy with strscpy
power: supply: surface_battery: replace deprecated strncpy with strscpy
power: supply: charger-manager: replace deprecated strncpy with strscpy
power: supply: bq25980: replace deprecated strncpy with strscpy
power: supply: bq256xx: replace deprecated strncpy with strscpy
power: supply: bq2515x: replace deprecated strncpy with strscpy
power: supply: bq24190_charger: replace deprecated strncpy with strscpy
power: supply: cpcap: Drop non-DT driver matching
power: reset: brcmstb: Depend on actual SoC dependencies
power: reset: gpio-poweroff: make sys handler priority configurable
dt-bindings: power: reset: gpio-poweroff: Add priority property
power: reset: gpio-poweroff: use sys-off handler API
power: reset: gpio-poweroff: use a struct to store the module variables
power: supply: rt5033_charger: Replace "&pdev->dev" by "charger->dev" in probe
power: supply: rt5033_charger: Simplify initialization of rt5033_charger_data
power: supply: rt5033_charger: Add cable detection and USB OTG supply
power: supply: core: remove opencoded string_lower()
dt-bindings: power: supply: sbs-manager: Add missing unevaluatedProperties on child node schemas
power: supply: mm8013: Fix an error checking issue in mm8013_checkdevice()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for LTC2991
- Driver for POWER-Z
Added chip / system support to existing drivers:
- The ina238 driver now also supports INA237
- The asus-ec-sensors driver now supports ROG Crosshair X670E Gene
- The aquacomputer_d5next now supports Aquacomputer High Flow USB and
MPS Flow
- The pmbus/mpq7932 driver now also supports MPQ2286
- The nct6683 now also supports ASRock X670E Taichi
Various other minor improvements and fixes:
- One patch series to call out is the conversion of hwmon platform
drivers to use the platform remove callback returning void"
* tag 'hwmon-for-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (69 commits)
hwmon: (aquacomputer_d5next) Check if temp sensors of legacy devices are connected
hwmon: (aquacomputer_d5next) Add support for Aquacomputer High Flow USB and MPS Flow
dt-bindings: hwmon: npcm: Add npcm845 compatible string
hwmon: Add driver for ltc2991
dt-bindings: hwmon: ltc2991: add bindings
hwmon: (pmbus/max31785) Add delay between bus accesses
hwmon: (ina238) add ina237 support
dt-bindings: hwmon: ti,ina2xx: add ti,ina237
hwmon: (asus-ec-sensors) add ROG Crosshair X670E Gene.
hwmon: (max31827) handle vref regulator
hwmon: (ina3221) Add support for channel summation disable
dt-bindings: hwmon: ina3221: Add ti,summation-disable
dt-bindings: hwmon: ina3221: Convert to json-schema
hwmon: (pmbus/mpq7932) Add a support for mpq2286 Power Management IC
hwmon: (pmbus/core) Add helper macro to define single pmbus regulator
regulator: dt-bindings: Add mps,mpq2286 power-management IC
hwmon: (pmbus/mpq7932) Get page count based on chip info
dt-bindings: hwmon: Add possible new properties to max31827 bindings
hwmon: (max31827) Modify conversion wait time
hwmon: (max31827) Make code cleaner
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We don't have any new drivers. The loongson driver is getting extended
with support for new models. There's a big refactor of gpio-pca953x
and many small improvements to others.
The GPIO code in the kernel has acquired a lot of cruft over the years
as well as many abusers of the API across the kernel tree. This
release cycle we have started a major cleanup and improvement effort
that will most likely span several releases. We have started by
converting external users of struct gpio_chip to accessing the wrapper
around it - struct gpio_device. This is because the latter is
reference counted while the former is removed when the provider is
unbound. We also removed several instances of drivers accessing
private GPIOLIB structures and including the private header from
drivers/gpio/.
To that end you'll see several commits aimed at different subsystems
(acked by relevant maintainers) as well as two merges from the
x86/platform tree.
We'll then rework the locking in GPIOLIB which currently uses a big
spinlock for many different things and could use becoming more
fine-grained, especially as it doesn't even get the locking right.
We'll also use SRCU for protecting the gpio_chip pointer against
in-kernel hot-unplug crashes similar to what we saw triggered from
user-space and fixed with semaphores in gpiolib-cdev. The core GPIOLIB
is still vulnerable to these use-cases. I'm just mentioning the plans
here, this is not part of this PR.
You'll see some new instances of using __free(). We've added a
gpio_device_put cleanup helper similar to the put_device one
introduced by Peter Zijlstra and used it according to the preferred
pattern except where it didn't make sense.
GPIOLIB core:
- provide interfaces allowing users to retrieve, manage and query the
reference counted GPIO device instead of accessing the private
gpio_chip structure
- replace gpiochip_find() with gpio_device_find()
- remove unused acpi_get_and_request_gpiod()
- improve the ignore_interrupt functionality in GPIO ACPI
- correct notifier return codes in gpiolib-of
- unexport gpiod_set_transitory() as it's unused outside of core GPIO
code
- while there are still external users accessing struct gpio_chip,
let's make gpiochip_get_desc() public so that they at least use the
preferred helper
- improve locking for lookup tables
- annotate struct linereq with __counted_by
- improve GPIOLIB docs
- add an OF quirk for LED trigger sources
Driver improvements:
- convert all GPIO drivers with .remove() callbacks to using the new
variant returning void instead of int
- stop accessing the GPIOLIB private structures in gpio-mockup,
i2c-mux-gpio, hte-tegra194, gpio-sim
- use the recommended pattern for autofree variables in gpio-sim
- add support for more models to gpio-loongson
- use a notifier chain to notify other blocks about interrupts in
gpio-eic-sprd instead of looking up GPIO devices on every interrupt
- convert gpio-pca953x and gpio-fx6408 to using the maple tree regmap
cache
- don't include GPIOLIB internal headers in drivers which don't need
them
- move the ingenic NAND quirk into gpiolib-of
- add an ignore interrupt quirk for Peaq C1010
- drop static GPIO base from gpio-omap, gpio-f7188x
- use the preferred device_get_match_data() function in drivers that
still don't
- refactor gpio-pca953x: switch to using DEFINE_SIMPLE_DEV_PM_OPS(),
use cleanup helpers, use dev_err_probe() where it makes sense,
fully convert to using devres and some other minor tweaks
DT bindings:
- add support for a new model to gpio-vf610 and update existing
properties
- add support for more loongson models
- add missing support for imx models that are used but undocumented
- convert bindings for Intel IXP4xx to schema
Minor stuff:
- deprecate gpio-mockup in favor of gpio-sim
- include missing headers here and there
- stop using gpiochip_find() in OMAP1 board files
- minor tweaks in gpio-vf610, gpio-hisi
- remove unneeded 'extern' specifiers from headers"
* tag 'gpio-updates-for-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (108 commits)
hte: tegra194: add GPIOLIB dependency
hte: tegra194: don't access struct gpio_chip
gpiolib: provide gpio_device_get_base()
i2c: mux: gpio: don't fiddle with GPIOLIB internals
gpiolib: provide gpiod_to_gpio_device()
gpiolib: provide gpio_device_to_device()
gpio: hisi: Fix format specifier
gpiolib: provide gpio_device_find_by_fwnode()
gpio: acpi: remove acpi_get_and_request_gpiod()
gpio: Use device_get_match_data()
gpio: vf610: update comment for i.MX8ULP and i.MX93 legacy compatibles
platform/x86: int3472: Switch to devm_get_gpiod()
platform/x86: int3472: Stop using gpiod_toggle_active_low()
platform/x86: int3472: Add new skl_int3472_gpiod_get_from_temp_lookup() helper
platform/x86: int3472: Add new skl_int3472_fill_gpiod_lookup() helper
gpio: vf610: simplify code by dropping data check
gpio: vf610: add i.MX8ULP of_device_id entry
dt-bindings: gpio: vf610: add i.MX95 compatible
dt-bindings: gpio: vf610: correct i.MX8ULP and i.MX93
dt-bindings: gpio: vf610: update gpio-ranges
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These further rework the ACPI thermal driver, after the changes made
to it in the previous cycle, to make it easier to grasp, get rid of
redundant pieces of internal data structures and eliminate its
reliance on a specific ordering of trip point objects in the thermal
core, make thermal core adjustments needed for the ACPI thermal driver
rework, modify the thermal governor interface so as to use trip
pointers for representing trip points in it, switch over multiple
thermal drivers to using void platform driver remove callbacks, add
support for 2 hardware features to the Intel int340x thermal driver,
add support for new hardware on ARM platforms, update documentation,
fix problems, clean up code and update the MAINTAINERS record for
thermal control.
Specifics:
- Untangle the initialization and updates of passive and active trip
points in the ACPI thermal driver (Rafael Wysocki)
- Reduce code duplication related to the initialization and updates
of trip points in the ACPI thermal driver (Rafael Wysocki)
- Use trip pointers for cooling device binding in the ACPI thermal
driver (Rafael Wysocki)
- Simplify critical and hot trips representation in the ACPI thermal
driver (Rafael Wysocki)
- Use trip pointers in thermal governors and in the related part of
the thermal core (Rafael Wysocki)
- Drop the trips_disabled bitmask that has become redundant from the
thermal core (Rafael Wysocki)
- Avoid updating trip points when the thermal zone temperature falls
into a trip point's hysteresis range (ícolas F. R. A. Prado)
- Add power floor notifications support to the int340x thermal
control driver (Srinivas Pandruvada)
- Rework updating trip points in the int340x thermal driver so that
it does not access thermal zone internals directly (Rafael
Wysocki)
- Use param_get_byte() instead of param_get_int() as the max_idle
module parameter .get() callback in the Intel powerclamp thermal
driver to avoid possible out-of-bounds access (David Arcari)
- Add workload hints support to the int340x thermal driver (Srinivas
Pandruvada)
- Add support for Mediatek LVTS MT8192 along with suspend/resume
routines (Balsam Chihi)
- Fix probe for THERMAL_V2 in the Mediatek LVTS driver (Markus
Schneider-Pargmann)
- Remove duplicate error message from the max76620 driver when
thermal_of_zone_register() fails (Thierry Reding)
- Add i.MX7D compatible bindings to fix a warning from dtbs_check for
the imx6ul platform (Alexander Stein)
- Add sa8775p compatible to the QCom tsens driver (Priyansh Jain)
- Fix error check in lvts_debugfs_init() to be against PTR_ERR() in
the LVTS Mediatek driver (Minjie Du)
- Remove unused variable in thermal/tools (Kuan-Wei Chiu)
- Document the imx8dl thermal sensor (Fabio Estevam)
- Add variable names in callback prototypes to prevent warning from
checkpatch.pl in the imx8mm driver (Bragatheswaran Manickavel)
- Add missing unevaluatedProperties on child node schemas for
tegra124 (Rob Herring)
- Add mt7988 support to the Mediatek LVTS driver (Frank Wunderlich)"
* tag 'thermal-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (111 commits)
thermal: ACPI: Include the right header file
thermal: core: Don't update trip points inside the hysteresis range
thermal: core: Pass trip pointer to governor throttle callback
thermal: gov_step_wise: Fold update_passive_instance() into its caller
thermal: gov_power_allocator: Use trip pointers instead of trip indices
thermal: gov_fair_share: Rearrange get_trip_level()
thermal: trip: Define for_each_trip() macro
thermal: trip: Simplify computing trip indices
thermal/qcom/tsens: Drop ops_v0_1
thermal/drivers/mediatek/lvts_thermal: Update calibration data documentation
thermal/drivers/mediatek/lvts_thermal: Add mt8192 support
thermal/drivers/mediatek/lvts_thermal: Add suspend and resume
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for mt8192
thermal/drivers/mediatek: Fix probe for THERMAL_V2
thermal/drivers/max77620: Remove duplicate error message
dt-bindings: timer: add imx7d compatible
dt-bindings: net: microchip: Allow nvmem-cell usage
dt-bindings: imx-thermal: Add #thermal-sensor-cells property
dt-bindings: thermal: tsens: Add sa8775p compatible
thermal/drivers/mediatek/lvts_thermal: Fix error check in lvts_debugfs_init()
...
|
|
Pickup some misc. CXL updates for v6.7.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support usec resolution of TCP timestamps, enabled selectively by a
route attribute.
- Defer regular TCP ACK while processing socket backlog, try to send
a cumulative ACK at the end. Increase single TCP flow performance
on a 200Gbit NIC by 20% (100Gbit -> 120Gbit).
- The Fair Queuing (FQ) packet scheduler:
- add built-in 3 band prio / WRR scheduling
- support bypass if the qdisc is mostly idle (5% speed up for TCP RR)
- improve inactive flow reporting
- optimize the layout of structures for better cache locality
- Support TCP Authentication Option (RFC 5925, TCP-AO), a more modern
replacement for the old MD5 option.
- Add more retransmission timeout (RTO) related statistics to
TCP_INFO.
- Support sending fragmented skbs over vsock sockets.
- Make sure we send SIGPIPE for vsock sockets if socket was
shutdown().
- Add sysctl for ignoring lower limit on lifetime in Router
Advertisement PIO, based on an in-progress IETF draft.
- Add sysctl to control activation of TCP ping-pong mode.
- Add sysctl to make connection timeout in MPTCP configurable.
- Support rcvlowat and notsent_lowat on MPTCP sockets, to help apps
limit the number of wakeups.
- Support netlink GET for MDB (multicast forwarding), allowing user
space to request a single MDB entry instead of dumping the entire
table.
- Support selective FDB flushing in the VXLAN tunnel driver.
- Allow limiting learned FDB entries in bridges, prevent OOM attacks.
- Allow controlling via configfs netconsole targets which were
created via the kernel cmdline at boot, rather than via configfs at
runtime.
- Support multiple PTP timestamp event queue readers with different
filters.
- MCTP over I3C.
BPF:
- Add new veth-like netdevice where BPF program defines the logic of
the xmit routine. It can operate in L3 and L2 mode.
- Support exceptions - allow asserting conditions which should never
be true but are hard for the verifier to infer. With some extra
flexibility around handling of the exit / failure:
https://lwn.net/Articles/938435/
- Add support for local per-cpu kptr, allow allocating and storing
per-cpu objects in maps. Access to those objects operates on the
value for the current CPU.
This allows to deprecate local one-off implementations of per-CPU
storage like BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE maps.
- Extend cgroup BPF sockaddr hooks for UNIX sockets. The use case is
for systemd to re-implement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services.
- Enable open-coded task_vma iteration, after maple tree conversion
made it hard to directly walk VMAs in tracing programs.
- Add open-coded task, css_task and css iterator support. One of the
use cases is customizable OOM victim selection via BPF.
- Allow source address selection with bpf_*_fib_lookup().
- Add ability to pin BPF timer to the current CPU.
- Prevent creation of infinite loops by combining tail calls and
fentry/fexit programs.
- Add missed stats for kprobes to retrieve the number of missed
kprobe executions and subsequent executions of BPF programs.
- Inherit system settings for CPU security mitigations.
- Add BPF v4 CPU instruction support for arm32 and s390x.
Changes to common code:
- overflow: add DEFINE_FLEX() for on-stack definition of structs with
flexible array members.
- Process doc update with more guidance for reviewers.
Driver API:
- Simplify locking in WiFi (cfg80211 and mac80211 layers), use wiphy
mutex in most places and remove a lot of smaller locks.
- Create a common DPLL configuration API. Allow configuring and
querying state of PLL circuits used for clock syntonization, in
network time distribution.
- Unify fragmented and full page allocation APIs in page pool code.
Let drivers be ignorant of PAGE_SIZE.
- Rework PHY state machine to avoid races with calls to phy_stop().
- Notify DSA drivers of MAC address changes on user ports, improve
correctness of offloads which depend on matching port MAC
addresses.
- Allow antenna control on injected WiFi frames.
- Reduce the number of variants of napi_schedule().
- Simplify error handling when composing devlink health messages.
Misc:
- A lot of KCSAN data race "fixes", from Eric.
- A lot of __counted_by() annotations, from Kees.
- A lot of strncpy -> strscpy and printf format fixes.
- Replace master/slave terminology with conduit/user in DSA drivers.
- Handful of KUnit tests for netdev and WiFi core.
Removed:
- AppleTalk COPS.
- AppleTalk ipddp.
- TI AR7 CPMAC Ethernet driver.
Drivers:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- add a driver for the Intel E2000 IPUs
- make CRC/FCS stripping configurable
- cross-timestamping for E823 devices
- basic support for E830 devices
- use aux-bus for managing client drivers
- i40e: report firmware versions via devlink
- nVidia/Mellanox:
- support 4-port NICs
- increase max number of channels to 256
- optimize / parallelize SF creation flow
- Broadcom (bnxt):
- enhance NIC temperature reporting
- support PAM4 speeds and lane configuration
- Marvell OcteonTX2:
- PTP pulse-per-second output support
- enable hardware timestamping for VFs
- Solarflare/AMD:
- conntrack NAT offload and offload for tunnels
- Wangxun (ngbe/txgbe):
- expose HW statistics
- Pensando/AMD:
- support PCI level reset
- narrow down the condition under which skbs are linearized
- Netronome/Corigine (nfp):
- support CHACHA20-POLY1305 crypto in IPsec offload
- Ethernet NICs embedded, slower, virtual:
- Synopsys (stmmac):
- add Loongson-1 SoC support
- enable use of HW queues with no offload capabilities
- enable PPS input support on all 5 channels
- increase TX coalesce timer to 5ms
- RealTek USB (r8152): improve efficiency of Rx by using GRO frags
- xen: support SW packet timestamping
- add drivers for implementations based on TI's PRUSS (AM64x EVM)
- nVidia/Mellanox Ethernet datacenter switches:
- avoid poor HW resource use on Spectrum-4 by better block
selection for IPv6 multicast forwarding and ordering of blocks
in ACL region
- Ethernet embedded switches:
- Microchip:
- support configuring the drive strength for EMI compliance
- ksz9477: partial ACL support
- ksz9477: HSR offload
- ksz9477: Wake on LAN
- Realtek:
- rtl8366rb: respect device tree config of the CPU port
- Ethernet PHYs:
- support Broadcom BCM5221 PHYs
- TI dp83867: support hardware LED blinking
- CAN:
- add support for Linux-PHY based CAN transceivers
- at91_can: clean up and use rx-offload helpers
- WiFi:
- MediaTek (mt76):
- new sub-driver for mt7925 USB/PCIe devices
- HW wireless <> Ethernet bridging in MT7988 chips
- mt7603/mt7628 stability improvements
- Qualcomm (ath12k):
- WCN7850:
- enable 320 MHz channels in 6 GHz band
- hardware rfkill support
- enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to
make scan faster
- read board data variant name from SMBIOS
- QCN9274: mesh support
- RealTek (rtw89):
- TDMA-based multi-channel concurrency (MCC)
- Silicon Labs (wfx):
- Remain-On-Channel (ROC) support
- Bluetooth:
- ISO: many improvements for broadcast support
- mark BCM4378/BCM4387 as BROKEN_LE_CODED
- add support for QCA2066
- btmtksdio: enable Bluetooth wakeup from suspend"
* tag 'net-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1816 commits)
net: pcs: xpcs: Add 2500BASE-X case in get state for XPCS drivers
net: bpf: Use sockopt_lock_sock() in ip_sock_set_tos()
net: mana: Use xdp_set_features_flag instead of direct assignment
vxlan: Cleanup IFLA_VXLAN_PORT_RANGE entry in vxlan_get_size()
iavf: delete the iavf client interface
iavf: add a common function for undoing the interrupt scheme
iavf: use unregister_netdev
iavf: rely on netdev's own registered state
iavf: fix the waiting time for initial reset
iavf: in iavf_down, don't queue watchdog_task if comms failed
iavf: simplify mutex_trylock+sleep loops
iavf: fix comments about old bit locks
doc/netlink: Update schema to support cmd-cnt-name and cmd-max-name
tools: ynl: introduce option to process unknown attributes or types
ipvlan: properly track tx_errors
netdevsim: Block until all devices are released
nfp: using napi_build_skb() to replace build_skb()
net: dsa: microchip: ksz9477: Fix spelling mistake "Enery" -> "Energy"
net: dsa: microchip: Ensure Stable PME Pin State for Wake-on-LAN
net: dsa: microchip: Refactor switch shutdown routine for WoL preparation
...
|
|
KVM/riscv changes for 6.7
- Smstateen and Zicond support for Guest/VM
- Virtualized senvcfg CSR for Guest/VM
- Added Smstateen registers to the get-reg-list selftests
- Added Zicond to the get-reg-list selftests
- Virtualized SBI debug console (DBCN) for Guest/VM
- Added SBI debug console (DBCN) to the get-reg-list selftests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.7
Add LoongArch's KVM support. Loongson 3A5000/3A6000 supports hardware
assisted virtualization. With cpu virtualization, there are separate
hw-supported user mode and kernel mode in guest mode. With memory
virtualization, there are two-level hw mmu table for guest mode and host
mode. Also there is separate hw cpu timer with consant frequency in
guest mode, so that vm can migrate between hosts with different freq.
Currently, we are able to boot LoongArch Linux Guests.
Few key aspects of KVM LoongArch added by this series are:
1. Enable kvm hardware function when kvm module is loaded.
2. Implement VM and vcpu related ioctl interface such as vcpu create,
vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
get general registers one by one.
3. Hardware access about MMU, timer and csr are emulated in kernel.
4. Hardwares such as mmio and iocsr device are emulated in user space
such as IPI, irqchips, pci devices etc.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.7
More updates for v6,7 following the early merge request:
- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.
|
|
Pull rust updates from Miguel Ojeda:
"A small one compared to the previous one in terms of features. In
terms of lines, as usual, the 'alloc' version upgrade accounts for
most of them.
Toolchain and infrastructure:
- Upgrade to Rust 1.73.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. They contain the fixes for
a few issues we reported to the Rust project.
In addition, a few cleanups indicated by the upgraded compiler or
possible thanks to it. For instance, the compiler now detects
redundant explicit links.
- A couple changes to the Rust 'Makefile' so that it can be used with
toybox tools, allowing Rust to be used in the Android kernel build.
x86:
- Enable IBT if enabled in C
Documentation:
- Add "The Rust experiment" section to the Rust index page
MAINTAINERS:
- Add Maintainer Entry Profile field ('P:').
- Update our 'W:' field to point to the webpage we have been building
this year"
* tag 'rust-6.7' of https://github.com/Rust-for-Linux/linux:
docs: rust: add "The Rust experiment" section
x86: Enable IBT in Rust if enabled in C
rust: Use grep -Ev rather than relying on GNU grep
rust: Use awk instead of recent xargs
rust: upgrade to Rust 1.73.0
rust: print: use explicit link in documentation
rust: task: remove redundant explicit link
rust: kernel: remove `#[allow(clippy::new_ret_no_self)]`
MAINTAINERS: add Maintainer Entry Profile field for Rust
MAINTAINERS: update Rust webpage
rust: upgrade to Rust 1.72.1
rust: arc: add explicit `drop()` around `Box::from_raw()`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.7-rc1:
drm-misc-next-2023-10-19 + following:
UAPI Changes:
Cross-subsystem Changes:
- Convert fbdev drivers to use fbdev i/o mem helpers.
Core Changes:
- Use cross-references for macros in docs.
- Make drm_client_buffer_addb use addfb2.
- Add NV20 and NV30 YUV formats.
- Documentation updates for create_dumb ioctl.
- CI fixes.
- Allow variable number of run-queues in scheduler.
Driver Changes:
- Rename drm/ast constants.
- Make ili9882t its own driver.
- Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu.
- Add planar formats to rockchip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- A new EDAC driver for Xilinx's Versal integrated memory controller
* tag 'edac_updates_for_v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/versal: Add a Xilinx Versal memory controller driver
dt-bindings: memory-controllers: Add support for Xilinx Versal EDAC for DDRMC
|
|
Pull initial bcachefs updates from Kent Overstreet:
"Here's the bcachefs filesystem pull request.
One new patch since last week: the exportfs constants ended up
conflicting with other filesystems that are also getting added to the
global enum, so switched to new constants picked by Amir.
The only new non fs/bcachefs/ patch is the objtool patch that adds
bcachefs functions to the list of noreturns. The patch that exports
osq_lock() has been dropped for now, per Ingo"
* tag 'bcachefs-2023-10-30' of https://evilpiepirate.org/git/bcachefs: (2781 commits)
exportfs: Change bcachefs fid_type enum to avoid conflicts
bcachefs: Refactor memcpy into direct assignment
bcachefs: Fix drop_alloc_keys()
bcachefs: snapshot_create_lock
bcachefs: Fix snapshot skiplists during snapshot deletion
bcachefs: bch2_sb_field_get() refactoring
bcachefs: KEY_TYPE_error now counts towards i_sectors
bcachefs: Fix handling of unknown bkey types
bcachefs: Switch to unsafe_memcpy() in a few places
bcachefs: Use struct_size()
bcachefs: Correctly initialize new buckets on device resize
bcachefs: Fix another smatch complaint
bcachefs: Use strsep() in split_devs()
bcachefs: Add iops fields to bch_member
bcachefs: Rename bch_sb_field_members -> bch_sb_field_members_v1
bcachefs: New superblock section members_v2
bcachefs: Add new helper to retrieve bch_member from sb
bcachefs: bucket_lock() is now a sleepable lock
bcachefs: fix crc32c checksum merge byte order problem
bcachefs: Fix bch2_inode_delete_keys()
...
|
|
Add support for LTC2991 Octal I2C Voltage, Current, and Temperature
Monitor.
The LTC2991 is used to monitor system temperatures, voltages and
currents. Through the I2C serial interface, the eight monitors can
individually measure supply voltages and can be paired for
differential measurements of current sense resistors or temperature
sensing transistors. Additional measurements include internal
temperature and internal VCC.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20231026103413.27800-2-antoniu.miclaus@analog.com
[groeck: Fixed up documentation warning]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some very small driver fixes for 6.6-final that have shown up
in the past two weeks. Included in here are:
- tiny fastrpc bugfixes for reported errors
- nvmem register fixes
- iio driver fixes for some reported problems
- fpga test fix
- MAINTAINERS file update for fpga
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
fpga: Fix memory leak for fpga_region_test_class_find()
fpga: m10bmc-sec: Change contact for secure update driver
fpga: disable KUnit test suites when module support is enabled
iio: afe: rescale: Accept only offset channels
nvmem: imx: correct nregs for i.MX6ULL
nvmem: imx: correct nregs for i.MX6UL
nvmem: imx: correct nregs for i.MX6SLL
misc: fastrpc: Unmap only if buffer is unmapped from DSP
misc: fastrpc: Clean buffers on remote invocation failures
misc: fastrpc: Free DMA handles for RPC calls with no arguments
misc: fastrpc: Reset metadata buffer to avoid incorrect free
iio: exynos-adc: request second interupt only when touchscreen mode is used
iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
dt-bindings: iio: add missing reset-gpios constrain
|
|
As he is the submitter of this driver, add his mail so he can
maintain the driver and easily reply in the mailing list.
Acked-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230928075249.109459-1-hal.feng@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
scripts/pahole-flags.sh is executed so many times.
You can confirm it, as follows:
$ cat <<EOF >> scripts/pahole-flags.sh
> echo "scripts/pahole-flags.sh was executed" >&2
> EOF
$ make -s
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
scripts/pahole-flags.sh was executed
[ lots of repeated lines... ]
This scripts is executed more than 20 times during the kernel build
because PAHOLE_FLAGS is a recursively expanded variable and exported
to sub-processes.
With GNU Make >= 4.4, it is executed more than 60 times because
exported variables are also passed to other $(shell ) invocations.
Without careful coding, it is known to cause an exponential fork
explosion. [1]
The use of $(shell ) in an exported recursive variable is likely wrong
because $(shell ) is always evaluated due to the 'export' keyword, and
the evaluation can occur multiple times by the nature of recursive
variables.
Convert the shell script to a Makefile, which is included only when
CONFIG_DEBUG_INFO_BTF=y.
[1]: https://savannah.gnu.org/bugs/index.php?64746
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
|
|
Some of the routines in ACPI driver/acpi/tables.c can be shared with
parsing CDAT. CDAT is a device-provided data structure that is formatted
similar to a platform provided ACPI table. CDAT is used by CXL and can
exist on platforms that do not use ACPI. Split out the common routine
from ACPI to accommodate platforms that do not support ACPI and move that
to /lib. The common routines can be built outside of ACPI if
FIRMWARE_TABLES is selected.
Link: https://lore.kernel.org/linux-cxl/CAJZ5v0jipbtTNnsA0-o5ozOk8ZgWnOg34m34a9pPenTyRLj=6A@mail.gmail.com/
Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/169713683430.2205276.17899451119920103445.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Mikulas is a long-time contributor to the DM subsystem and has
effectively been a shadow DM maintainer. It is time to formally
name Mikulas as a DM maintainer.
In practice this doesn't imply any process changes for DM maintenance
(Mikulas can still just feed changes and contribute review like
normal).
This change does allow the possibility for Mikulas to take on more
responsibility in actually sending DM changes upstream.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
POWER-Z is a series of devices to monitor power characteristics of
USB-C connections and display those on a on-device display.
Some of the devices, notably KM002C and KM003C, contain an additional
port which exposes the measurements via USB.
This is a driver for this monitor port.
It was developed and tested with the KM003C.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230902-powerz-v4-1-7ec2c1440687@weissschuh.net
[groeck:
Release urb after hwmon registration error;
Move priv->status initialization to correct place before reinit_completion
]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the Greybus host driver for BeaglePlay board by BeagleBoard.org.
The current greybus setup involves running SVC in a user-space
application (GBridge) and using netlink to communicate with kernel
space. GBridge itself uses wpanusb kernel driver, so the greybus messages
travel from kernel space (gb_netlink) to user-space (GBridge) and then
back to kernel space (wpanusb) before reaching CC1352.
This driver directly communicates with CC1352 (running SVC Zephyr
application). Thus, it simplifies the complete greybus setup eliminating
user-space GBridge.
This driver is responsible for the following:
- Start SVC (CC1352) on driver load.
- Send/Receive Greybus messages to/from CC1352 using HDLC over UART.
- Print Logs from CC1352.
- Stop SVC (CC1352) on driver load.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Link: https://lore.kernel.org/r/20231017101116.178041-3-ayushdevel1325@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add DT bindings for Texas Instruments Simplelink CC1352P7 wireless MCU
BeaglePlay has CC1352P7 co-processor connected to the main AM62 (running
Linux) over UART. In the BeagleConnect Technology, CC1352 is responsible
for handling 6LoWPAN communication with beagleconnect freedom nodes as
well as their discovery.
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20231017101116.178041-2-ayushdevel1325@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are a few files missing from the list like test_arm_coresight.sh
and arm-coresight.txt so add the missing entries.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20231020154103.55936-1-james.clark@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Brijesh is no longer with AMD.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This driver was originally developed for the Focusrite Scarlett Gen 2
series. Since then Focusrite have used a similar protocol for their
Gen 3, Gen 4, Clarett USB, Clarett+, and Vocaster series.
Let's call this common protocol the "Scarlett 2 Protocol" and rename
the driver to scarlett2 to not imply that it is restricted to Gen 2
series devices.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/e1ad7f69a1e20cdb39094164504389160c1a0a0b.1698342632.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Messages submitted to the ML bounce (address not found error). In
fact, the ML was mistagged as person maintainer instead of mailing
list.
Remove the ML to keep Cc: lists a bit shorter and not to spam
everyone's inbox with postmaster notifications.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231025130332.67995-2-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.7
The third, and most likely the last, features pull request for v6.7.
Fixes all over and only few small new features.
Major changes:
iwlwifi
- more Multi-Link Operation (MLO) work
ath12k
- QCN9274: mesh support
ath11k
- firmware-2.bin container file format support
* tag 'wireless-next-2023-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (155 commits)
wifi: ray_cs: Remove unnecessary (void*) conversions
Revert "wifi: ath11k: call ath11k_mac_fils_discovery() without condition"
wifi: ath12k: Introduce and use ath12k_sta_to_arsta()
wifi: ath12k: fix htt mlo-offset event locking
wifi: ath12k: fix dfs-radar and temperature event locking
wifi: ath11k: fix gtk offload status event locking
wifi: ath11k: fix htt pktlog locking
wifi: ath11k: fix dfs radar event locking
wifi: ath11k: fix temperature event locking
wifi: ath12k: rename the sc naming convention to ab
wifi: ath12k: rename the wmi_sc naming convention to wmi_ab
wifi: ath11k: add firmware-2.bin support
wifi: ath11k: qmi: refactor ath11k_qmi_m3_load()
wifi: rtw89: cleanup firmware elements parsing
wifi: rt2x00: rework MT7620 PA/LNA RF calibration
wifi: rt2x00: rework MT7620 channel config function
wifi: rt2x00: improve MT7620 register initialization
MAINTAINERS: wifi: rt2x00: drop Helmut Schaa
wifi: wlcore: main: replace deprecated strncpy with strscpy
wifi: wlcore: boot: replace deprecated strncpy with strscpy
...
====================
Link: https://lore.kernel.org/r/20231026090411.B2426C433CB@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-26
We've added 51 non-merge commits during the last 10 day(s) which contain
a total of 75 files changed, 5037 insertions(+), 200 deletions(-).
The main changes are:
1) Add open-coded task, css_task and css iterator support.
One of the use cases is customizable OOM victim selection via BPF,
from Chuyi Zhou.
2) Fix BPF verifier's iterator convergence logic to use exact states
comparison for convergence checks, from Eduard Zingerman,
Andrii Nakryiko and Alexei Starovoitov.
3) Add BPF programmable net device where bpf_mprog defines the logic
of its xmit routine. It can operate in L3 and L2 mode,
from Daniel Borkmann and Nikolay Aleksandrov.
4) Batch of fixes for BPF per-CPU kptr and re-enable unit_size checking
for global per-CPU allocator, from Hou Tao.
5) Fix libbpf which eagerly assumed that SHT_GNU_verdef ELF section
was going to be present whenever a binary has SHT_GNU_versym section,
from Andrii Nakryiko.
6) Fix BPF ringbuf correctness to fold smp_mb__before_atomic() into
atomic_set_release(), from Paul E. McKenney.
7) Add a warning if NAPI callback missed xdp_do_flush() under
CONFIG_DEBUG_NET which helps checking if drivers were missing
the former, from Sebastian Andrzej Siewior.
8) Fix missed RCU read-lock in bpf_task_under_cgroup() which was throwing
a warning under sleepable programs, from Yafang Shao.
9) Avoid unnecessary -EBUSY from htab_lock_bucket by disabling IRQ before
checking map_locked, from Song Liu.
10) Make BPF CI linked_list failure test more robust,
from Kumar Kartikeya Dwivedi.
11) Enable samples/bpf to be built as PIE in Fedora, from Viktor Malik.
12) Fix xsk starving when multiple xsk sockets were associated with
a single xsk_buff_pool, from Albert Huang.
13) Clarify the signed modulo implementation for the BPF ISA standardization
document that it uses truncated division, from Dave Thaler.
14) Improve BPF verifier's JEQ/JNE branch taken logic to also consider
signed bounds knowledge, from Andrii Nakryiko.
15) Add an option to XDP selftests to use multi-buffer AF_XDP
xdp_hw_metadata and mark used XDP programs as capable to use frags,
from Larysa Zaremba.
16) Fix bpftool's BTF dumper wrt printing a pointer value and another
one to fix struct_ops dump in an array, from Manu Bretelle.
* tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (51 commits)
netkit: Remove explicit active/peer ptr initialization
selftests/bpf: Fix selftests broken by mitigations=off
samples/bpf: Allow building with custom bpftool
samples/bpf: Fix passing LDFLAGS to libbpf
samples/bpf: Allow building with custom CFLAGS/LDFLAGS
bpf: Add more WARN_ON_ONCE checks for mismatched alloc and free
selftests/bpf: Add selftests for netkit
selftests/bpf: Add netlink helper library
bpftool: Extend net dump with netkit progs
bpftool: Implement link show support for netkit
libbpf: Add link-based API for netkit
tools: Sync if_link uapi header
netkit, bpf: Add bpf programmable net device
bpf: Improve JEQ/JNE branch taken logic
bpf: Fold smp_mb__before_atomic() into atomic_set_release()
bpf: Fix unnecessary -EBUSY from htab_lock_bucket
xsk: Avoid starving the xsk further down the list
bpf: print full verifier states on infinite loop detection
selftests/bpf: test if state loops are detected in a tricky case
bpf: correct loop detection for iterators convergence
...
====================
Link: https://lore.kernel.org/r/20231026150509.2824-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Deep has decided to transfer the maintainership of the VMware virtual
PTP clock driver (ptp_vmw) to Jeff. Update the MAINTAINERS file to
reflect this change.
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Acked-by: Deep Shah <sdeep@vmware.com>
Acked-by: Jeff Sipek <jsipek@vmware.com>
Link: https://lore.kernel.org/r/20231025231931.76842-1-amakhalov@vmware.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/mac80211/rx.c
91535613b609 ("wifi: mac80211: don't drop all unprotected public action frames")
6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value")
Adjacent changes:
drivers/net/ethernet/apm/xgene/xgene_enet_main.c
61471264c018 ("net: ethernet: apm: Convert to platform remove callback returning void")
d2ca43f30611 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF")
net/vmw_vsock/virtio_transport.c
64c99d2d6ada ("vsock/virtio: support to send non-linear skb")
53b08c498515 ("vsock/virtio: initialize the_virtio_vsock before using VQs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the GPU Scheduler maintainer email.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Link: https://lore.kernel.org/r/20231026174438.18427-2-ltuikov89@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of platforms have some last-minute fixes, in particular:
- riscv gets some fixes for noncoherent DMA on the renesas and thead
platforms and dts fix for SPI on the visionfive 2 board
- Qualcomm Snapdragon gets three dts fixes to address board specific
regressions on the pmic and gpio nodes
- Rockchip platforms get multiple dts fixes to address issues on the
recent rk3399 platform as well as the older rk3128 platform that
apparently regressed a while ago.
- TI OMAP gets some trivial code and dts fixes and a regression fix
for the omap1 ams-delta modem
- NXP i.MX firmware has one fix for a use-after-free but in its error
handling"
* tag 'soc-fixes-6.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
soc: renesas: ARCH_R9A07G043 depends on !RISCV_ISA_ZICBOM
riscv: only select DMA_DIRECT_REMAP from RISCV_ISA_ZICBOM and ERRATA_THEAD_PBMT
riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT
riscv: dts: thead: set dma-noncoherent to soc bus
arm64: dts: rockchip: Fix i2s0 pin conflict on ROCK Pi 4 boards
arm64: dts: rockchip: Add i2s0-2ch-bus-bclk-off pins to RK3399
clk: ti: Fix missing omap5 mcbsp functional clock and aliases
clk: ti: Fix missing omap4 mcbsp functional clock and aliases
ARM: OMAP1: ams-delta: Fix MODEM initialization failure
soc: renesas: Make ARCH_R9A07G043 depend on required options
riscv: dts: starfive: visionfive 2: correct spi's ss pin
firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()
ARM: OMAP: timer32K: fix all kernel-doc warnings
ARM: omap2: fix a debug printk
ARM: dts: rockchip: Fix timer clocks for RK3128
ARM: dts: rockchip: Add missing quirk for RK3128's dma engine
ARM: dts: rockchip: Add missing arm timer interrupt for RK3128
ARM: dts: rockchip: Fix i2c0 register address for RK3128
arm64: dts: rockchip: set codec system-clock-fixed on px30-ringneck-haikou
arm64: dts: rockchip: use codec as clock master on px30-ringneck-haikou
...
|
|
tools/testing/cxl contains the unit test infrastructure for mocking CXL
hierarchies. These are under the purview of the CXL subsystem maintainers.
Add the 'F:' entry for this to MAINTAINERS so that get_maintainer.pl
works as expected for patches to this area.
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20231026-vv-mainteners-fix-v1-1-0a0f25634073@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
DRM CI keeps track of which tests are failing, flaking or being skipped
by the ci in the expectations files. Add entries for those files to the
corresponding driver maintainer, so they can be notified when they
change.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230919182249.153499-1-helen.koike@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v6.7
The Qualcomm SMC an QSEECOM drivers are moved into a "qcom"
subdirectory, to declutter the base directory. Missing include guards
are added to the qseecom header file. Unneded extern specifiers are
removed from the scm call wrappers.
__counted_by is added to the apr_rx_buf structure, in the APR driver.
Lastly in the pmic_glink driver the pmic_glink drm_bridge type is
corrected to DisplayPort, over the incorrect "USB" value. The return
values are added to error prints for the various typec set() calls.
* tag 'qcom-drivers-for-6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
firmware: qcom: qseecom: add missing include guards
Link: https://lore.kernel.org/r/20231025201109.1016121-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This reverts the following commits:
commit 53313ed25ba8 ("dt-bindings: marvell: Add Marvell MV88E6060 DSA schema")
commit 0f35369b4efe ("dt-bindings: marvell: Rewrite MV88E6xxx in schema")
commit 605a5f5d406d ("ARM64: dts: marvell: Fix some common switch mistakes")
commit bfedd8423643 ("ARM: dts: nxp: Fix some common switch mistakes")
commit 2b83557a588f ("ARM: dts: marvell: Fix some common switch mistakes")
commit ddae07ce9bb3 ("dt-bindings: net: mvusb: Fix up DSA example")
commit b5ef61718ad7 ("dt-bindings: net: dsa: Require ports or ethernet-ports")
As repoted by Vladimir, it breaks boot on the Turris MOX board.
Link: https://lore.kernel.org/all/20231025093632.fb2qdtunzaznd73z@skbuf/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Marvell MV88E6060 is one of the oldest DSA switches from
Marvell, and it has DT bindings used in the wild. Let's define
them properly.
It is different enough from the rest of the MV88E6xxx switches
that it deserves its own binding.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is an attempt to rewrite the Marvell MV88E6xxx switch bindings
in YAML schema.
The current text binding says:
WARNING: This binding is currently unstable. Do not program it into a
FLASH never to be changed again. Once this binding is stable, this
warning will be removed.
Well that never happened before we switched to YAML markup,
we can't have it like this, what about fixing the mess?
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This work adds a new, minimal BPF-programmable device called "netkit"
(former PoC code-name "meta") we recently presented at LSF/MM/BPF. The
core idea is that BPF programs are executed within the drivers xmit routine
and therefore e.g. in case of containers/Pods moving BPF processing closer
to the source.
One of the goals was that in case of Pod egress traffic, this allows to
move BPF programs from hostns tcx ingress into the device itself, providing
earlier drop or forward mechanisms, for example, if the BPF program
determines that the skb must be sent out of the node, then a redirect to
the physical device can take place directly without going through per-CPU
backlog queue. This helps to shift processing for such traffic from softirq
to process context, leading to better scheduling decisions/performance (see
measurements in the slides).
In this initial version, the netkit device ships as a pair, but we plan to
extend this further so it can also operate in single device mode. The pair
comes with a primary and a peer device. Only the primary device, typically
residing in hostns, can manage BPF programs for itself and its peer. The
peer device is designated for containers/Pods and cannot attach/detach
BPF programs. Upon the device creation, the user can set the default policy
to 'pass' or 'drop' for the case when no BPF program is attached.
Additionally, the device can be operated in L3 (default) or L2 mode. The
management of BPF programs is done via bpf_mprog, so that multi-attach is
supported right from the beginning with similar API and dependency controls
as tcx. For details on the latter see commit 053c8e1f235d ("bpf: Add generic
attach/detach/query API for multi-progs"). tc BPF compatibility is provided,
so that existing programs can be easily migrated.
Going forward, we plan to use netkit devices in Cilium as the main device
type for connecting Pods. They will be operated in L3 mode in order to
simplify a Pod's neighbor management and the peer will operate in default
drop mode, so that no traffic is leaving between the time when a Pod is
brought up by the CNI plugin and programs attached by the agent.
Additionally, the programs we attach via tcx on the physical devices are
using bpf_redirect_peer() for inbound traffic into netkit device, hence the
latter is also supporting the ndo_get_peer_dev callback. Similarly, we use
bpf_redirect_neigh() for the way out, pushing from netkit peer to phys device
directly. Also, BIG TCP is supported on netkit device. For the follow-up
work in single device mode, we plan to convert Cilium's cilium_host/_net
devices into a single one.
An extensive test suite for checking device operations and the BPF program
and link management API comes as BPF selftests in this series.
Co-developed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://github.com/borkmann/iproute2/tree/pr/netkit
Link: http://vger.kernel.org/bpfconf2023_material/tcx_meta_netdev_borkmann.pdf (24ff.)
Link: https://lore.kernel.org/r/20231024214904.29825-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
generated with:
$ ./tools/net/ynl/ynl-gen-c.py --mode uapi \
> --spec Documentation/netlink/specs/mptcp.yaml \
> --header -o include/uapi/linux/mptcp_pm.h
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-5-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
it describes most of the current netlink interface (uAPI definitions,
doit/dumpit operations and attributes)
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-4-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 12 are cc:stable and the remainder address post-6.5
issues or aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier
mailmap: correct email aliasing for Oleksij Rempel
mailmap: map Bartosz's old address to the current one
mm/damon/sysfs: check DAMOS regions update progress from before_terminate()
MAINTAINERS: Ondrej has moved
kasan: disable kasan_non_canonical_hook() for HW tags
kasan: print the original fault addr when access invalid shadow
hugetlbfs: close race between MADV_DONTNEED and page fault
hugetlbfs: extend hugetlb_vma_lock to private VMAs
hugetlbfs: clear resv_map pointer if mmap fails
mm: zswap: fix pool refcount bug around shrink_worker()
mm/migrate: fix do_pages_move for compat pointers
riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set
riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking
mmap: fix error paths with dup_anon_vma()
mmap: fix vma_iterator in error path of vma_merge()
mm: fix vm_brk_flags() to not bail out while holding lock
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
mm/page_alloc: correct start page when guard page debug is enabled
|
|
Change the maintainer for the Intel MAX10 BMC Secure Update driver from
Russ Weight to Peter Colberg. Update the ABI documentation contact
information as well.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Peter Colberg <peter.colberg@intel.com>
Link: https://lore.kernel.org/r/20230928164753.278684-1-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://lore.kernel.org/r/20231023032857.902699-2-yilun.xu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc fixes from Paul McKenney:
- tools/nolibc: i386: Fix a stack misalign bug on _start
- MAINTAINERS: nolibc: update tree location
- tools/nolibc: mark start_c as weak to avoid linker errors
* tag 'urgent/nolibc.2023.10.16a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc: mark start_c as weak
MAINTAINERS: nolibc: update tree location
tools/nolibc: i386: Fix a stack misalign bug on _start
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 6.6 (part 1)
Update MAINTAINERS for eDPU board
* tag 'mvebu-fixes-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
MAINTAINERS: uDPU: add remaining Methode boards
MAINTAINERS: uDPU: make myself maintainer of it
Link: https://lore.kernel.org/r/875y32abqe.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Get fixes needed so we can enable build of ams-delta in more
configurations.
|
|
Add a EDAC driver for the RAS capabilities on the Xilinx integrated DDR
Memory Controllers (DDRMCs) which support both DDR4 and LPDDR4/4X memory
interfaces. It has four programmable Network-on-Chip (NoC) interface
ports and is designed to handle multiple streams of traffic. The driver
reports correctable and uncorrectable errors, and also creates debugfs
entries for testing through error injection.
[ bp:
- Add a pointer to the documentation about the register unlock code.
- Squash in a fix for a Smatch static checker issue as reported by
Dan Carpenter:
https://lore.kernel.org/r/a4db6f93-8e5f-4d55-a7b8-b5a987d48a58@moroto.mountain
]
Co-developed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231005101242.14621-3-shubhrajyoti.datta@amd.com
|
|
Helmut hasn't been responding to rt2x00 related emails since 2016,
remove him from rt2x00 mainterner list.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231019202651.518136-1-stf_xl@wp.pl
|
|
As discussed on alsa-devel mailing list [1], it is useful to have an open
mailing list to avoid moderation delays for the kernel patch work. Use
linux-sound mailing list for kernel driver related threads.
In the first stage, change the list for the ALSA core, ASoC and tests.
[1] https://lore.kernel.org/alsa-devel/20231019-posture-cache-fe060b@meerkat/
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231020071247.973909-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Update this entry for R-Car Gen4's source code.
Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-15-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
|
|
On the one hand Eugen has taken responsibilities outside Microchip, on the
other hand I have some experience with the Microchip SDMMC SDHCI
controller. Change Eugen as reviewer and take over maintainership of the
SDHCI MICROCHIP DRIVER. Also, take over maintainership of its predecessor,
that is the MCI MICROCHIP DRIVER.
Signed-off-by: Aubin Constans <aubin.constans@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20230911153246.137148-1-aubin.constans@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Brian has been playing with bcachefs for several months now and has
offerred to commit time to patch review.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs is a new copy-on-write filesystem; add a MAINTAINERS entry for
it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're getting more and more qcom specific .c files in drivers/firmware/
and about to get even more. Create a separate directory for Qualcomm
firmware drivers and move existing sources in there.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Link: https://lore.kernel.org/r/20231017092732.19983-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Fix spurious brightness down presses on newer Asus laptop models
- Fix backlight control not working on T2 Mac Pro all-in-ones
- Add Armin Wolf as new maintainer for the WMI bus driver and change
its status from orphaned to maintained
- A few other small fixes
* tag 'platform-drivers-x86-v6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/mellanox: mlxbf-tmfifo: Fix a warning message
apple-gmux: Hard Code max brightness for MMIO gmux
platform/surface: platform_profile: Propagate error if profile registration fails
platform/x86: asus-wmi: Map 0x2a code, Ignore 0x2b and 0x2c events
platform/x86: asus-wmi: Only map brightness codes when using asus-wmi backlight control
platform/x86: asus-wmi: Change ASUS_WMI_BRN_DOWN code from 0x20 to 0x2e
platform/x86: wmi: Update MAINTAINERS entry
platform/x86: msi-ec: Fix the 3rd config
platform/x86: intel-uncore-freq: Conditionally create attribute for read frequency
platform: mellanox: Fix a resource leak in an error handling path in probing flow
|
|
No significant improvements have been done to this driver since commit
a7c3ddf29a78 ("staging: qlge: clean up debugging code in the QL_ALL_DUMP
ifdef land") in January 2021. The driver should not stay in staging
forever. Since it has been abandoned by the vendor and no one has stepped
up to maintain it, delete it.
If some users manifest themselves, the driver will be restored to
drivers/net/ as suggested in the linked message.
Link: https://lore.kernel.org/netdev/20231019074237.7ef255d7@kernel.org/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Cc: Manish Chopra <manishc@marvell.com>
Cc: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231020124457.312449-3-benjamin.poirier@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.7
This is quite a large set of changes but mostly due to API cleanups and
in driver specific ways rather than due to anything subsystem wide.
Highlights include:
- Standardisation of API prefixes on snd_soc_, removing asoc_.
- GPIO API usage improvements.
- Support for HDA patches.
- Lots of work on SOF, including crash dump support.
- Support for AMD platforms with es83xx, Awinc AT87390, many Intel
platforms, many Mediatek platforms, Qualcomm SM6115, Richtek RTQ9128
and Texas Instruments TAS575x.
[ the merge conflicts around SOF Intel HD-audio and CS35L41 subcodec
drivers are resolved here -- tiwai ]
|
|
While most of the gcc-plugins are self-contained in the
scripts/gcc-plugins directory, stackleak actually has some additional
files. Add those so changes are directed to the hardening list.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20231019004616.work.960-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.7
Particularly great to see a resolver driver move out of staging via a
massive set of changes. Only took 13 years :)
One small patch added then reverted due to a report of test breakage
(ashai-kasei,ak8975: Drop deprecated enums.)
An immutable branch was used for some hid-senors changes in case
there was a need to take them into the HID tree as well.
New device support
-----------------
adi,hmc425a
- Add support for HMC540SLP3E broadband 4-bit digital attenuator.
kionix,kx022a
- Add support for the kx132-1211 accelerometer. Require significant
driver rework to enable this including add a chip type specific
structure to deal with the chip differences.
- Add support for the kx132acr-lbz accelerometer (subset of the kx022a
feature set).
lltc,ltc2309
- New driver for this 8 channel ADC.
microchip,mcp3911
- Add support for rest of mcp391x family of ADCs (there are various
differences beyond simple channel count variation.
Series includes some general driver cleanup.
microchip,mcp3564
- New driver for MCP3461, MCP3462, MCP3464, MCP3541, MCP3562, MCP3564
and their R variants of 16/24bit ADCs. A few minor fixed followed.
rohm,bu1390
- New driver for this pressure sensor.
Staging graduation
------------------
adi,ad1210 (after 13 or so years :)
- More or less a complete (step-wise) rewrite of this resolver driver
to bring it up to date with modern IIO standards. The fault signal
handling mapping to event channels was particularly complex and
significant part of the changes.
Features
--------
iio-core
- Add chromacity and color temperature channel types.
adi,ad7192
- Oversampling ratio control (called fast settling in datasheet).
adi,adis16475
- Add core support and then driver support for delta angle and delta
velocity channels. These are intended for summation to establish
angle and velocity changes over larger timescales. Fix was
needed for alignment after the temperature channel. Further fix
reduced set of devices for which the buffer support was applicable
as seems burst reads don't cover these on all devices.
hid-sensors-als
- Chromacity and color temperatures support including in amd sfh.
stx104
- Add support for counter subsystem to this multipurpose device.
ti,twl6030
- Add missing device tree binding description.
Clean up and minor fixes.
------------------------
treewide
- Drop some unused declarations across IIO.
- Make more use of device_get_match_data() instead of OF specific
approaches.
Similar cleanup to sets of drivers.
- Stop platform remove callbacks returning anything by using the
temporary remove_new() callback.
- Use i2c_get_match_data() to cope nicely with all types of ID table
entry.
- Use device_get_match_data() for various platform device to cope
with more types of firmware.
- Convert from enum to pointer in ID tables allowing use of
i2c_get_match_data().
- Fix sorting on some ID tables.
- Include specific string helper headers rather than simply string_helpers.h
docs
- Better description of the ordering requirements etc for
available_scan_masks.
tools
- Handle alignment of mixed sizes where the last element isn't the biggest
correctly. Seems that doesn't happen often!
adi,ad2s1210
- Lots of work from David Lechner on this driver including a few fixes
that are going with the rework to avoid slowing that down.
adi,ad4310
- Replace deprecated devm_clk_register()
adi,ad74413r
- Bring the channel function setting inline with the datasheet.
adi,ad7192
- Change to FIELD_PREP(), FIELD_GET().
- Calculate f_order from the sinc filter and chop filter states.
- Move more per chip config into data in struct ad7192_chip_info
- Cleanup unused parameter in channel macros.
adi,adf4350
- Make use of devm_* to simplify error handling for many of the setup
calls in probe() / tear down in remove() and error paths. Some more
work to be done on this one.
- Use dev_err_probe() for errors in probe() callback.
adi,adf4413
- Typo in function name prefix.
adi,adxl345
- Add channel scale to the chip type specific structure and drop
using a type field previously used for indirection.
asahi,ak8985
- Fix a mismatch introduced when switching from enum->pointers
in the match tables.
amlogic,meson
- Expand error logging during probe.
invensense,mpu6050
- Support level-shifter control. Whilst no one is sure exactly what this
is doing it is needed for some old boards.
- Document mount-matrix dt-binding.
mediatek,mt6577
- Use devm_clk_get_enabled() to replace open coded version and move
everything over to being device managed. Drop now empty remove()
callback. Fix follows to put the drvdata back.
- Use dev_err_probe() for error reporting in probe() callback.
memsic,mxc4005
- Add of_match_table.
microchip,mcp4725
- Move various chip specific data from being looked up by chip ID to
data in the chip type specific structure.
silicon-labs,si7005
- Add of_match_table and entry in trivial-devices.yaml
st,lsm6dsx
- Add missing mount-matrix dt binding documentation.
st,spear
- Use devm_clk_get_enabled() and some other devm calls to move everything
over to being device managed. Drop now empty remove() callback.
- Use dev_err_probe() to better handled deferred probing and tidy up
error reporting in probe() callback.
st,stm32-adc
- Add a bit of additional checking in probe() to protect against a NULL
pointer (no known path to trigger it today).
- Replace deprecated strncpy()
ti,ads1015
- Allow for edge triggers.
- Document interrupt in dt-bindings.
* tag 'iio-for-6.7a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (201 commits)
iio: Use device_get_match_data()
iio: adc: MCP3564: fix warn: unsigned '__x' is never less than zero.
dt-bindings: trivial-devices: add silabs,si7005
iio: si7005: Add device tree support
drivers: imu: adis16475.c: Remove scan index from delta channels
dt-bindings: iio: imu: st,lsm6dsx: add mount-matrix property
iio: resolver: ad2s1210: remove of_match_ptr()
iio: resolver: ad2s1210: remove DRV_NAME macro
iio: resolver: ad2s1210: move out of staging
staging: iio: resolver: ad2s1210: simplify code with guard(mutex)
staging: iio: resolver: ad2s1210: clear faults after soft reset
staging: iio: resolver: ad2s1210: refactor sample toggle
staging: iio: resolver: ad2s1210: remove fault attribute
staging: iio: resolver: ad2s1210: add label attribute support
staging: iio: resolver: ad2s1210: add register/fault support summary
staging: iio: resolver: ad2s1210: implement fault events
iio: event: add optional event label support
staging: iio: resolver: ad2s1210: rename DOS reset min/max attrs
staging: iio: resolver: ad2s1210: convert DOS mismatch threshold to event attr
staging: iio: resolver: ad2s1210: convert DOS overrange threshold to event attr
...
|
|
One of the common operations of a TSM (Trusted Security Module) is to
provide a way for a TVM (confidential computing guest execution
environment) to take a measurement of its launch state, sign it and
submit it to a verifying party. Upon successful attestation that
verifies the integrity of the TVM additional secrets may be deployed.
The concept is common across TSMs, but the implementations are
unfortunately vendor specific. While the industry grapples with a common
definition of this attestation format [1], Linux need not make this
problem worse by defining a new ABI per TSM that wants to perform a
similar operation. The current momentum has been to invent new ioctl-ABI
per TSM per function which at best is an abdication of the kernel's
responsibility to make common infrastructure concepts share common ABI.
The proposal, targeted to conceptually work with TDX, SEV-SNP, COVE if
not more, is to define a configfs interface to retrieve the TSM-specific
blob.
report=/sys/kernel/config/tsm/report/report0
mkdir $report
dd if=binary_userdata_plus_nonce > $report/inblob
hexdump $report/outblob
This approach later allows for the standardization of the attestation
blob format without needing to invent a new ABI. Once standardization
happens the standard format can be emitted by $report/outblob and
indicated by $report/provider, or a new attribute like
"$report/tcg_coco_report" can emit the standard format alongside the
vendor format.
Review of previous iterations of this interface identified that there is
a need to scale report generation for multiple container environments
[2]. Configfs enables a model where each container can bind mount one or
more report generation item instances. Still, within a container only a
single thread can be manipulating a given configuration instance at a
time. A 'generation' count is provided to detect conflicts between
multiple threads racing to configure a report instance.
The SEV-SNP concepts of "extended reports" and "privilege levels" are
optionally enabled by selecting 'tsm_report_ext_type' at register_tsm()
time. The expectation is that those concepts are generic enough that
they may be adopted by other TSM implementations. In other words,
configfs-tsm aims to address a superset of TSM specific functionality
with a common ABI where attributes may appear, or not appear, based on
the set of concepts the implementation supports.
Link: http://lore.kernel.org/r/64961c3baf8ce_142af829436@dwillia2-xfh.jf.intel.com.notmuch [1]
Link: http://lore.kernel.org/r/57f3a05e-8fcd-4656-beea-56bb8365ae64@linux.microsoft.com [2]
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Samuel Ortiz <sameo@rivosinc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Cross-merge networking fixes after downstream PR.
net/mac80211/key.c
02e0e426a2fb ("wifi: mac80211: fix error path key leak")
2a8b665e6bcc ("wifi: mac80211: remove key_mtx")
7d6904bf26b9 ("Merge wireless into wireless-next")
https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/
Adjacent changes:
drivers/net/ethernet/ti/Kconfig
a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object")
98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
lib/generic-radix-tree.c is a simple radix tree that supports storing
arbitrary types. Add a maintainers entry for it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
closures, from bcache, are async widgets with a variety of uses.
bcachefs also uses them, so they're being moved to lib/; mark them as
maintained.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
There are no users with a vlynq_driver in the Kernel tree. Also, only
the AR7 platform ever initialized a VLYNQ bus, but AR7 is going to be
removed from the Kernel. OpenWRT had some out-of-tree drivers which they
probably intended to upport, but AR7 devices are even there not
supported anymore because they are "stuck with Kernel
3.18" [1]. This code can go.
[1] https://openwrt.org/docs/techref/targets/ar7
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This patch add a new kselftest to demonstrate and verify the new hugetlb
memcg accounting behavior.
Link: https://lkml.kernel.org/r/20231006184629.155543-5-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update my email-address in MAINTAINERS to <megi@xff.cz>. Also add
.mailmap entries to map my old, now blocked, email address.
Link: https://lkml.kernel.org/r/20231008105812.1084226-1-megi@xff.cz
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org> # qcom
Cc: Mark Brown <broonie@kernel.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.7
This introduces partial support for the Qualcomm Secure Execution
Environment SCM interface, and uses this to implement EFI variable
access on the Windows On Snapdragon devices (for now).
The 32/64-bit calling convention detector of the SCM interface is
updated to not choose 64-bit convention when Linux is 32-bit. The
"extern" specifier is dropped from the interface include file.
The LLCC driver gains support for carrying configuration for multiple
different system/DDR configurations for a given platform, and selecting
between them. Support for Q[DR]U1000 is added to the driver.
All exported symbols are transitioned to EXPORT_SYMBOL_GPL().
The platform_drivers in the Qualcomm SoC are transitioned to the
void-returning remove_new implementation.
The rmtfs memory driver gains support for leaving guard pages around the
used area, to avoid issues if the allocation happens to be placed
adjacent to another protected memory region.
The socinfo driver gains knowledge about IPQ8174, QCM6490, SM7150P and
various PMICs used together with SM8550.
* tag 'qcom-drivers-for-6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (44 commits)
soc: qcom: socinfo: Convert to platform remove callback returning void
soc: qcom: smsm: Convert to platform remove callback returning void
soc: qcom: smp2p: Convert to platform remove callback returning void
soc: qcom: smem: Convert to platform remove callback returning void
soc: qcom: rmtfs_mem: Convert to platform remove callback returning void
soc: qcom: qcom_stats: Convert to platform remove callback returning void
soc: qcom: qcom_gsbi: Convert to platform remove callback returning void
soc: qcom: qcom_aoss: Convert to platform remove callback returning void
soc: qcom: pmic_glink: Convert to platform remove callback returning void
soc: qcom: ocmem: Convert to platform remove callback returning void
soc: qcom: llcc-qcom: Convert to platform remove callback returning void
soc: qcom: icc-bwmon: Convert to platform remove callback returning void
firmware: qcom_scm: use 64-bit calling convention only when client is 64-bit
soc: qcom: llcc: Handle a second device without data corruption
soc: qcom: Switch to EXPORT_SYMBOL_GPL()
soc: qcom: smem: Annotate struct qcom_smem with __counted_by
soc: qcom: rmtfs: Support discarding guard pages
dt-bindings: reserved-memory: rmtfs: Allow guard pages
dt-bindings: firmware: qcom,scm: document IPQ5018 compatible
firmware: qcom_scm: disable SDI if required
...
Link: https://lore.kernel.org/r/20231015204014.855672-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
objpool, a scalable and lockless ring-array based object pool, was
introduced to replace the original freelist (a LIFO queue based on
singly linked list) to improve kretprobe scalability.
Link: https://lore.kernel.org/all/20231017135654.82270-6-wuqiang.matt@bytedance.com/
Signed-off-by: wuqiang.matt <wuqiang.matt@bytedance.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.7
StarFive:
Things are a bit slower for StarFive this window, there's only the
addition of audio related DT nodes to speak of here.
Generic:
The SiFive, StarFive and Microchip devicetrees have had my replacement
ISA extension detection properties added. Unfortunately, the old
"riscv,isa" property never defined exactly what the extensions it
contained meant, and people were want to fill it in incorrectly (and
call upstream kernel devs idiots for not doing the same). The new
properties have explicit definitions and hopefully will stand up better
to some of the variation from RVI.
Sophgo:
Two new SoCs, one is probably the first of several with up/down tuned
variants, that have a pair of T-Head c906 cores and appear aimed at the
IP camera, smart <insert whatever> etc markets. They are intended to run
in AMP mode, with an RTOS on the less powerful core. The other is far
more interesting to kernel developers however, the 64-core SG2042, with
more recent c920 cores from T-Head at 2 GHz. For both, support is at a
very basic stage - some of the same developers are working on them as
other T-Head powered SoCs, but hopefully things will move beyond a basic
console boot. The goal is for Chen Wang to take over maintaining the
Sophgo support once they have some more experience with the process.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.7' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (22 commits)
riscv: dts: starfive: convert isa detection to new properties
riscv: dts: sifive: convert isa detection to new properties
riscv: dts: microchip: convert isa detection to new properties
riscv: dts: sophgo: add Milk-V Duo board device tree
riscv: dts: sophgo: add initial CV1800B SoC device tree
dt-bindings: riscv: Add Milk-V Duo board compatibles
dt-bindings: timer: Add SOPHGO CV1800B clint
dt-bindings: interrupt-controller: Add SOPHGO CV1800B plic
riscv: defconfig: enable SOPHGO SoC
riscv: dts: sophgo: add Milk-V Pioneer board device tree
riscv: dts: add initial Sophgo SG2042 SoC device tree
dt-bindings: interrupt-controller: Add Sophgo sg2042 CLINT mswi
dt-bindings: timer: Add Sophgo sg2042 CLINT timer
dt-bindings: interrupt-controller: Add Sophgo SG2042 PLIC
dt-bindings: riscv: Add T-HEAD C920 compatibles
dt-bindings: riscv: add sophgo sg2042 bindings
dt-bindings: vendor-prefixes: add milkv/sophgo
riscv: Add SOPHGO SOC family Kconfig support
riscv: dts: starfive: add assigned-clock* to limit frquency
riscv: dts: starfive: Add JH7110 PWM-DAC support
...
Link: https://lore.kernel.org/r/20231016-filing-payroll-7aca51b8f1a3@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix the path of the devicetree bindings. The path was changed during
review but MAINTAINERS file was not updated.
Fixes: b4a3d877dc92 ("media: ti: Add CSI2RX support for J721E")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310130411.c66pTXjG-lkp@intel.com/
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Commit 0113a99b8a75 ("eeprom: Remove deprecated legacy eeprom driver")
already removes the eeprom driver's code.
Remove also the eeprom driver's documentation and MAINTAINERS section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20231012042834.6663-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a Device Tree binding schema for the OLED panels based on the Solomon
SSD132x family of controllers.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-7-javierm@redhat.com
|
|
There are DT properties that can be shared across different Solomon OLED
Display Controller families. Split them into a separate common schema to
avoid these properties to be duplicated in different DT bindings schemas.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231014071520.1342189-6-javierm@redhat.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next
This tag contains habanalabs driver changes for v6.7.
The notable changes are:
- uAPI changes:
- Expose tsc clock sampling to better sync clock information in profiler.
- Enhance engine error reporting in the info ioctl.
- Block access to the eventfd operations through the control device.
- Disable the option of the user to register multiple times with the same
offset for timestamp dump by the driver. If a user wants to use the same
offset in the timestamp buffer for different interrupt, it needs to first
de-register the offset.
- When exporting dma-buf (for p2p), force the user to specify size/offset
in multiples of PAGE_SIZE. This is instead of the driver doing the
rounding to PAGE_SIZE, which has caused the driver to map more memory
than was intended by the user.
- New features and improvements:
- Complete the move of the driver to the accel subsystem by removing the
custom habanalabs class and major and registering to accel subsystem.
- Move the firmware interface files to include/linux/habanalabs. This is
a pre-requisite for upstreaming the NIC drivers of Gaudi (as they need to
include those files).
- Perform device hard-reset upon PCIe AXI drain event to prevent the failure
from cascading to different IP blocks in the SoC. In secured environments,
this is done automatically by the firmware.
- Print device name when it is removed for better debuggability.
- Add support for trace of dma map sgtable operations.
- Optimize handling of user interrupts by splitting the interrupts to two
lists. One list for fast handling and second list for handling with
timestamp recording, which is slower.
- Prevent double device hard-reset due to 2 adjacent H/W events.
- Set device status 'malfunction' while in rmmod.
- Firmware related fixes:
- Extend preboot timeout because preboot loading might take longer than
expected in certain cases.
- Add a protection mechanism for the Event Queue. In case it is full, the
firmware will be able to notify about it through a dedicated interrupt.
- Perform device hard-reset in case scrubbing of memory has failed.
- Bug fixes and code cleanups:
- Small fixes of dma-buf handling in Gaudi2, such as handling an offset != 0,
using the correct exported size, creation of sg table.
- Fix spmu mask creation.
- Fix bug in wait for cs completion for decoder workloads.
- Cleanup Greco name from documentation.
- Fix bug in recording timestamp during cs completion interrupt handling.
- Fix CoreSight ETF configuration and flush logic.
- Fix small bug in hpriv_list handling (the list that contains the private
data per process that opens our device).
Signed-off-by: Dave Airlie <airlied@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmUlHoQACgkQZR1NuKta
# 54DsXQf8CW+W4iWJf5UDTj/E/giu9rVRrsUsU0hhCcXbecIxRsLObYXtulENu5/u
# VuEAo/tAvo0LUKi8pdIv6ernDKaxZ1+fimlfXMCzllAA/ts3yp1NgunprsIsx3tv
# YgcJ2GNR8UlVZ1qYuZl+4dOTyD0yfRMROUXBe7wqKnUXOEepOiLBxq6W15tZiJnx
# L+V0yGkNk6pAoADIXLW9EgEXiN/bJZCXGPWp06i/Nz7cHIHJGoV59wAqftqllCtk
# 8ZMkLByjlQKPhc5AgWBtKE8EGVip3sm7b/Q2Gq0ZXdZiebyVJ+AjuuDOdtq1UCIw
# Rcp2576E7rByIBu3RAFlrioWhuR5Zw==
# =2ien
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 10 Oct 2023 19:51:00 AEST
# gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780
# gpg: Can't check signature: No public key
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZSUfiX4J7v4Wn0cU@ogabbay-vm-u22.habana-labs.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.7
Main additions this time include:
1. SCMI v3.2 clock configuration support:
This helps to retrieve the enabled state of a clock as well as allow
to set OEM specific clock configurations.
2. Support for generic performance scaling(DVFS):
The current SCMI DVFS support is limited to the CPUs in the kernel.
This extension enables it to used for all kind of devices and not
only for the CPUs. It updates the SCMI cpufreq to utilize the power
domain bindings. It also adds a more generic SCMI performance domain
based on the genpd framework that as be used for all the non-CPU
devices.
3. Extend the generic performance scaling(DVFS) support for firmware
driver OPPs:
Consumer drivers for devices that are attached to the SCMI performance
domain can't make use of the current OPP library to scale performance
as the OPPs are firmware driven and often obtained from the firmware
rather than the device tree. These changes extend the generic OPP
and genpd PM domain frameworks to identify and utilise these firmware
driven OPPs.
4. SCMI v3.2 clock parent support:
This enables the support for discovering and changing parent clocks
and extending the SCMI clk driver to use the same.
5. Qualcom SMC/HVC transport support:
The Qualcomm virtual platforms require capability id in the hypervisor
call to identify which doorbell to assert when supporting multiple
SMC/HVC based SCMI transport channels. Extra parameter is added to
support the same and the same is obtained at the fixed address in the
shared memory which is initialised by the firmware.
6. Move the existing SCMI power domain driver under drivers/pmdomain
Apart from the above main changes, it also include couple of minor fixes
and cosmetic reworks.
* tag 'scmi-updates-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (37 commits)
firmware: arm_scmi: Add qcom smc/hvc transport support
dt-bindings: arm: Add new compatible for smc/hvc transport for SCMI
firmware: arm_scmi: Convert u32 to unsigned long to align with arm_smccc_1_1_invoke()
clk: scmi: Add support for clock {set,get}_parent
firmware: arm_scmi: Add support for clock parents
clk: scmi: Free scmi_clk allocated when the clocks with invalid info are skipped
firmware: arm_scpi: Use device_get_match_data()
firmware: arm_scmi: Add generic OPP support to the SCMI performance domain
firmware: arm_scmi: Specify the performance level when adding an OPP
firmware: arm_scmi: Simplify error path in scmi_dvfs_device_opps_add()
OPP: Extend support for the opp-level beyond required-opps
OPP: Switch to use dev_pm_domain_set_performance_state()
OPP: Extend dev_pm_opp_data with a level
OPP: Add dev_pm_opp_add_dynamic() to allow more flexibility
PM: domains: Implement the ->set_performance_state() callback for genpd
PM: domains: Introduce dev_pm_domain_set_performance_state()
firmware: arm_scmi: Rename scmi_{msg_,}clock_config_{get,set}_{2,21}
firmware: arm_scmi: Do not use !! on boolean when setting msg->flags
firmware: arm_scmi: Move power-domain driver to the pmdomain dir
pmdomain: arm: Add the SCMI performance domain
...
Link: https://lore.kernel.org/r/20231010124347.1620040-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.7
- New board support: TQ-Systems LS1043A/LS1046A and LS1088 based boards,
VAR-SOM-MX6 SoM, SolidRun LX2162A SoM & Clearfog, and phyGATE-Tauri
i.MX 8M Mini board.
- A set of changes from Adam Ford adding audio related devices for i.MX8M
SoCs, migrating sound card to simple-audio-card for imx8mm-beacon board,
and adding DMIC support i.MX8M Beacon boards.
- A series from Alexander Stein to add LVDS overlay support for i.MX8M
based MBA8Mx boards.
- A couple of changes from Cem Tenruh to add gpio-line-names for i.MX8MP
based phycore boards.
- A bunch of dt-schema check fixes from Fabio Estevam.
- A few changes from Frank Li to add edma devices and enable UART
support for i.MX93 and i.MX8 SoCs and related boards.
- A series from Marek Vasut to improve various aspects of i.MX8MP based
DHCOM boards support.
- A series from Teresa Remmet to enable Flexcan, USB and RS232/RS485
support for imx8mp-phyboard-pollux board.
- A number of changes from Tim Harvey to add imx219 overlay and TPM
device support for Gateworks boards.
- Other small and random changes.
* tag 'imx-dt64-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (101 commits)
arm64: dts: imx8mp: Drop i.MX8MP DHCOM rev.100 PHY address workaround from PDK3 DT
arm64: dts: imx8mp: Update i.MX8MP DHCOM SoM DT to production rev.200
arm64: dts: imx8mp: Add UART1 and RTC wake up source on DH i.MX8M Plus DHCOM SoM
arm64: dts: imx8mp: Switch WiFI enable signal to mmc-pwrseq-simple on i.MX8MP DHCOM SoM
arm64: dts: imx8mp: Fix property indent on DH i.MX8M Plus DHCOM PDK3
arm64: dts: imx8mp: Describe VDD_ARM run and standby voltage for DH i.MX8M Plus DHCOM SoM
arm64: dts: imx8mp: Describe VDD_ARM run and standby voltage for Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mp-beacon: Add DMIC support
arm64: dts: imx8mn-beacon: Add DMIC support
arm64: dts: imx8mm-beacon: Add DMIC support
arm64: dts: imx8mm-beacon: Migrate sound card to simple-audio-card
arm64: dts: imx8mn-evk: Remove codec clocks/clock-names
arm64: dts: imx8mp-beacon: Configure 100MHz PCIe Ref Clk
arm64: dts: imx8mn: Add sound-dai-cells to micfil node
arm64: dts: imx8mm: Add sound-dai-cells to micfil node
arm64: dts: freescale: add initial device tree for TQMLS1088A
arm64: dts: freescale: add initial device tree for TQMLS1043A/TQMLS1046A
arm64: dts: ls1043a: remove second dspi node
arm64: dts: freescale: Add support for LX2162 SoM & Clearfog Board
arm64: dts: lx2160a: describe the SerDes block #2
...
Link: https://lore.kernel.org/r/20231015132300.2268016-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device tree bindings for the LCD Controller (LCDC) found in Renesas
SuperH SH-Mobile and ARM SH/R-Mobile SOCs.
Based on a plain text prototype by Laurent Pinchart.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/6d0a053502abd6555e9a6cbe055e1bdc3329999d.1694767208.git.geert+renesas@glider.be
|
|
Split off DRM drivers for Renesas SH-Mobile into its own entry, and add
Geert Uytterhoeven as a maintainer.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/7cbcec72214886b67afa8d724a9245661d8cd675.1694767208.git.geert+renesas@glider.be
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- documentation update for embargoed hardware issues
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...
|
|
lib/bitmap.c and corresponding include/linux/bitmap.h are intended to
hold functions related to operations on bitmaps, like bitmap_shift or
bitmap_set. Historically, some string-related operations like
bitmap_parse are also reside in lib/bitmap.c.
Now that the subsystem evolves, string-related bitmap operations became a
significant part of the file. Because they are quite different from the
other bitmap functions by nature, it's worth to split them to a separate
source/header files.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
Chandrakanth patil <chandrakanth.patil@broadcom.com> says:
This set of patches includes critical fixes, and updates to the
maintainer list.
Link: https://lore.kernel.org/r/20231003110021.168862-1-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Given my active involvement in megaraid_sas development, I am including
myself in the maintainers list.
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231003110021.168862-5-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace Martin, who has left GE.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230921104751.56544-2-ian.ray@ge.com
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c55 ("bpf: Fix verifier log for async callback return values")
a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The nolibc tree moved out of Willys user namespace into its own.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20230916-nolibc-tree-v1-1-06c9b59a5035@weissschuh.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"AngeloGioacchino Del Regno is stepping in as co-maintainer for the
MediaTek SoC platform and starts by sending some dts fixes for the
mt8195 platform that had been pending for a while.
On the ixp4xx platform, Krzysztof Halasa steps down as co-maintainer,
reflecting that Linus Walleij has been handling this on his own for
the past few years.
Generic RISC-V kernels are now marked as incompatible with the RZ/Five
platform that requires custom hacks both for managing its DMA bounce
buffers and for addressing low virtual memory.
Finally, there is one bugfix for the AMDTEE firmware driver to prevent
a use-after-free bug"
* tag 'soc-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
IXP4xx MAINTAINERS entries
arm64: dts: mediatek: mt8195: Set DSU PMU status to fail
arm64: dts: mediatek: fix t-phy unit name
arm64: dts: mediatek: mt8195-demo: update and reorder reserved memory regions
arm64: dts: mediatek: mt8195-demo: fix the memory size to 8GB
MAINTAINERS: Add Angelo as MediaTek SoC co-maintainer
soc: renesas: Make ARCH_R9A07G043 (riscv version) depend on NONPORTABLE
tee: amdtee: fix use-after-free vulnerability in amdtee_close_session
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some pin control fixes for v6.6 which have been stacking up in my
tree.
Dmitry's fix to some locking in the core is the most substantial, that
was a really neat fix.
The rest is the usual assorted spray of minor driver fixes.
- Drop some minor code causing warnings in the Lantiq driver
- Fix out of bounds write in the Nuvoton driver
- Fix lost IRQs with CONFIG_PM in the Starfive driver
- Fix a locking issue in find_pinctrl()
- Revert a regressive Tegra debug patch
- Fix the Renesas RZN1 pin muxing"
* tag 'pinctrl-v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzn1: Enable missing PINMUX
Revert "pinctrl: tegra: Add support to display pin function"
pinctrl: avoid unsafe code pattern in find_pinctrl()
pinctrl: starfive: jh7110: Add system pm ops to save and restore context
pinctrl: starfive: jh7110: Fix failure to set irq after CONFIG_PM is enabled
pinctrl: nuvoton: wpcm450: fix out of bounds write
pinctrl: lantiq: Remove unsued declaration ltq_pinctrl_unregister()
|
|
With the introduction of the get-reg-list test for riscv, another
directory has been added that should be tracked by riscv kvm
maintainers.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Update MAINTAINERS entries for Intel IXP4xx SoCs.
Linus has been handling all IXP4xx stuff since 2019 or so.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Deepak Saxena <dsaxena@plexity.net>
Link: https://lore.kernel.org/r/m3ttqxu4ru.fsf@t19.piap.pl
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As I'm actively working on the rkisp1 driver, I would like to volunteer
as a co-maintainer, mostly to make sure I get CC on patches.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
capture over a CSI-2 bus.
The Cadence CSI2RX IP acts as a bridge between the TI specific parts and
the CSI-2 protocol parts. TI then has a wrapper on top of this bridge
called the SHIM layer. It takes in data from stream 0, repacks it, and
sends it to memory over PSI-L DMA.
This driver acts as the "front end" to V4L2 client applications. It
implements the required ioctls and buffer operations, passes the
necessary calls on to the bridge, programs the SHIM layer, and performs
DMA via the dmaengine API to finally return the data to a buffer
supplied by the application.
Co-developed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Tested-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Become designated reviewer and help thermal subsystem in development
process.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Amit Kucheria has not been participating in kernel development in any
way or form for quite some time, so it is not useful to list him as a
designated reviewer for the thermal subsystem or as the thermal zone DT
binding maintainer.
Remove him from the THERMAL entry in MAINTAINERS and list Daniel Lezcano
as the new thermal zone DT binding maintainer.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Amit Kucheria <amitk@kernel.org>
|
|
Since 2011, the WMI subsystem is marked as orphaned,
which means that a important part of platform support
for modern notebooks and even desktops is receiving
not enough maintenance.
So i decided to take over the maintenance of the WMI
subsystem.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231007233933.72121-2-W_Armin@gmx.de
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Updating drm-misc-next to the state of Linux v6.6-rc2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
After the cops driver is removed, ipddp is now the only
CONFIG_DEV_APPLETALK but as far as I can tell, this also has no users
and can be removed, making appletalk support purely based on ethertalk,
using ethernet hardware.
Link: https://lore.kernel.org/netdev/e490dd0c-a65d-4acf-89c6-c06cb48ec880@app.fastmail.com/
Link: https://lore.kernel.org/netdev/9cac4fbd-9557-b0b8-54fa-93f0290a6fb8@schmorgal.com/
Cc: Doug Brown <doug@schmorgal.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231009141139.1766345-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
|
|
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230930185354.3034118-1-costa.shul@redhat.com
|
|
and fix all in-tree references.
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230826165737.2101199-1-costa.shul@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
|
|
This adds support for the TQMLS1043A and TQMLS1046A SOM and the
MBLS10xxA baseboard. TQMLS1043A and TQMLS1046A share a common layout
and can be used on the MBLS10xxA.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The CPUCP interface is moved to a shared folder outside of accel as
a pre-requisite to upstream the NIC drivers that will also include
this file.
Signed-off-by: David Meriin <dmeriin@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add the MAINTAINERS entries for NXP(Freescale) eDMA drivers
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231004143228.839288-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix memory leak when freeing dm zoned target device
- Update dm-devel mailing list address in MAINTAINERS
* tag 'for-6.6/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
MAINTAINERS: update the dm-devel mailing list
dm zoned: free dmz->ddev array in dmz_put_zoned_devices
|
|
It is pretty obvious that I haven't done much on the IRQ side
for a while, and it is unlikely that I'll have more bandwidth
for it any time soon. People keep sending me patches that
I end-up reviewing in a cursory manner, which isn't great for
anyone.
So in everyone's interest, I'm removing myself from the list
of maintainers and leave the irqchip and irqdomain subsystems
in Thomas' capable hands.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231002141302.3409485-3-maz@kernel.org
|
|
The ARM GIC maintenance is currently covered by the blanket
IRQCHIP DRIVERS entry, which I'm about to remove myself from.
It is unlikely that anyone is mad enough to pick this up,
so I'll keep doing that for the foreseable future.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Link: https://lore.kernel.org/r/20231002141302.3409485-2-maz@kernel.org
|
|
Milk-V Pioneer motherboard is powered by SG2042.
SG2042 is server grade chip with high performance, low power
consumption and high data throughput.
Key features:
- 64 RISC-V cpu cores
- 4 cores per cluster, 16 clusters on chip
- More info is available at [1].
Currently only support booting into console with only uart,
other features will be added soon later.
Link: https://en.sophgo.com/product/introduce/sg2042.html [1]
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Chao Wei <chao.wei@sophgo.com>
Co-developed-by: Xiaoguang Xing <xiaoguang.xing@sophgo.com>
Signed-off-by: Xiaoguang Xing <xiaoguang.xing@sophgo.com>
Co-developed-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The MT9M114 is a CMOS camera sensor that combines a 1296x976 pixel array
with a 10-bit dynamic range together with an internal ISP. The driver
exposes two subdevs, one for the pixel array and one for the ISP (named
IFP for Image Flow Processor). Major supported features are
- Full configuration of analog crop and binning in the pixel array
- Full configuration of scaling in the ISP
- Automatic exposure and white balance
- Manual exposure and analog gain
- Horizontal and vertical flip
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add device tree binding for the onsemi MT9M114 CMOS camera sensor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The current maintainers won't be looking after this driver anymore. Mark
it orphan.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The current maintainers won't be looking after this driver anymore. Mark
it orphan.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The current maintainers won't be looking after this driver anymore. Mark
it orphan.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The current maintainers won't be looking after this driver anymore. Dave
offered to take over the driver, assign maintenance to him.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Digiteq Automotive MGB4 is a modular frame grabber PCIe card for automotive
video interfaces. As for now, two modules - FPD-Link and GMSL - are
available and supported by the driver. The card has two inputs and two
outputs (FPD-Link only).
In addition to the video interfaces it also provides a trigger signal
interface and a MTD interface for FPGA firmware upload.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
dm-devel@redhat.com has migrated to dm-devel@lists.linux.dev
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Since there's no alternate driver, change this entry from obsolete
to orphan.
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Link: https://lore.kernel.org/r/20231005131039.25881-1-harini.katakam@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I am a top reviewer mainly for MediaTek SoC related patches in most
subsystems and I've also been upstreaming both improvements, fixes
and new drivers and devicetrees when required.
The MediaTek scene saw a generous increase in number of patches that
are sent to the lists every week, increasing the amount of required
efforts to maintain the MTK bits overall, and we will possibly see
even more of that.
For this reason, and also because of suggestions and encouragement
coming from the community, I'm stepping up to be a co-maintainer of
MediaTek SoCs support.
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20230929082009.71843-1-angelogioacchino.delregno@collabora.com
Link: https://lore.kernel.org/r/20231003-mediatek-fixes-v6-7-v1-1-dad7cd62a8ff@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add DT binding documentation for the SOPHGO's SG2042 Soc [1] and the
Milk-V Pioneer board [2].
Link: https://en.sophgo.com/product/introduce/sg2042.html [1]
Link: https://milkv.io/pioneer [2]
Acked-by: Chao Wei <chao.wei@sophgo.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add missing sof header files for ASoC.
Suggested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/lkml/f258a7e6-0728-4f55-a71a-6e99113ce7e5@sirena.org.uk
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231005025618.work.355-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
AR7 is going to be removed from the Kernel, so remove its networking
support in form of the cpmac driver. This allows us to remove the
platform because this driver includes a platform specific header.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/all/20230922061530.3121-6-wsa+renesas@sang-engineering.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (or adjacent changes of note).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The `P:` field allows a URI, and we have been adding information
on how to contribute to the Rust subsystem to our webpage for a
while now (and other relevant topics, e.g. branches, third-party
crates, Rust unstable features...).
The webpage/document does not currently follow the headings of
the Maintainer Entry Profile, but it does nevertheless answer
some of the questions we have got so far from contributors and
it covers partially some of the topics there.
Thus link to our "Contributing" document [1].
Link: https://rust-for-linux.com/contributing [1]
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20230830165949.127475-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
A few months ago we started a webpage for the Rust subsystem and
the overall Rust for Linux project [1].
The current `W:` field of the Rust entry points to the GitHub
repository, since originally we kept information in a `README.md`
file that got rendered by GitHub when visiting that URL.
That information was moved into the webpage and got expanded.
The webpage is also nowadays the entry point to the project,
and we pointed the "Website" GitHub metadata field to it.
Thus update the `W:` field to point to the actual webpage.
Link: https://rust-for-linux.com [1]
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Geert Stappers <stappers@stappers.nl>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20230830165949.127475-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, netfilter, BPF and WiFi.
I didn't collect precise data but feels like we've got a lot of 6.5
fixes here. WiFi fixes are most user-awaited.
Current release - regressions:
- Bluetooth: fix hci_link_tx_to RCU lock usage
Current release - new code bugs:
- bpf: mprog: fix maximum program check on mprog attachment
- eth: ti: icssg-prueth: fix signedness bug in prueth_init_tx_chns()
Previous releases - regressions:
- ipv6: tcp: add a missing nf_reset_ct() in 3WHS handling
- vringh: don't use vringh_kiov_advance() in vringh_iov_xfer(), it
doesn't handle zero length like we expected
- wifi:
- cfg80211: fix cqm_config access race, fix crashes with brcmfmac
- iwlwifi: mvm: handle PS changes in vif_cfg_changed
- mac80211: fix mesh id corruption on 32 bit systems
- mt76: mt76x02: fix MT76x0 external LNA gain handling
- Bluetooth: fix handling of HCI_QUIRK_STRICT_DUPLICATE_FILTER
- l2tp: fix handling of transhdrlen in __ip{,6}_append_data()
- dsa: mv88e6xxx: avoid EEPROM timeout when EEPROM is absent
- eth: stmmac: fix the incorrect parameter after refactoring
Previous releases - always broken:
- net: replace calls to sock->ops->connect() with kernel_connect(),
prevent address rewrite in kernel_bind(); otherwise BPF hooks may
modify arguments, unexpectedly to the caller
- tcp: fix delayed ACKs when reads and writes align with MSS
- bpf:
- verifier: unconditionally reset backtrack_state masks on global
func exit
- s390: let arch_prepare_bpf_trampoline return program size, fix
struct_ops offsets
- sockmap: fix accounting of available bytes in presence of PEEKs
- sockmap: reject sk_msg egress redirects to non-TCP sockets
- ipv4/fib: send netlink notify when delete source address routes
- ethtool: plca: fix width of reads when parsing netlink commands
- netfilter: nft_payload: rebuild vlan header on h_proto access
- Bluetooth: hci_codec: fix leaking memory of local_codecs
- eth: intel: ice: always add legacy 32byte RXDID in supported_rxdids
- eth: stmmac:
- dwmac-stm32: fix resume on STM32 MCU
- remove buggy and unneeded stmmac_poll_controller, depend on NAPI
- ibmveth: always recompute TCP pseudo-header checksum, fix use of
the driver with Open vSwitch
- wifi:
- rtw88: rtw8723d: fix MAC address offset in EEPROM
- mt76: fix lock dependency problem for wed_lock
- mwifiex: sanity check data reported by the device
- iwlwifi: ensure ack flag is properly cleared
- iwlwifi: mvm: fix a memory corruption due to bad pointer arithm
- iwlwifi: mvm: fix incorrect usage of scan API
Misc:
- wifi: mac80211: work around Cisco AP 9115 VHT MPDU length"
* tag 'net-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
MAINTAINERS: update Matthieu's email address
mptcp: userspace pm allow creating id 0 subflow
mptcp: fix delegated action races
net: stmmac: remove unneeded stmmac_poll_controller
net: lan743x: also select PHYLIB
net: ethernet: mediatek: disable irq before schedule napi
net: mana: Fix oversized sge0 for GSO packets
net: mana: Fix the tso_bytes calculation
net: mana: Fix TX CQE error handling
netlink: annotate data-races around sk->sk_err
sctp: update hb timer immediately after users change hb_interval
sctp: update transport state when processing a dupcook packet
tcp: fix delayed ACKs for MSS boundary condition
tcp: fix quick-ack counting to count actual ACKs of new data
page_pool: fix documentation typos
tipc: fix a potential deadlock on &tx->lock
net: stmmac: dwmac-stm32: fix resume on STM32 MCU
ipv4: Set offload_failed flag in fibmatch results
netfilter: nf_tables: nft_set_rbtree: fix spurious insertion failure
netfilter: nf_tables: Deduplicate nft_register_obj audit logs
...
|
|
Use my kernel.org account instead.
The other one will bounce by the end of the year.
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231004-send-net-20231004-v1-3-28de4ac663ae@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add myself as a maintainer for ROHM BM1390 pressure sensor driver.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/fb19d3027ac19663789e18d4dc972a5dac0fde74.1695727471.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The http://ez.analog.com/community/linux-device-drivers link is broken.
Update website link to the new available one:
https://ez.analog.com/linux-software-drivers
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230926100149.4611-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Update the firmware_loader documentation and corresponding section
in the MAINTAINERs file with a new email address.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20230929151326.311959-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Kconfig belongs closer to the corresponding implementation, hence let's
move it from the soc subsystem to the pmdomain subsystem.
Cc: Walker Chen <walker.chen@starfivetech.com>
Cc: Conor Dooley <conor@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Make sure a few other paths are correctly sent to the ASoC maintainers.
Link: https://lore.kernel.org/lkml/63dd3676.170a0220.1f1b2.3244@mx.google.com/
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20231004193441.work.109-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Quite a collection of fixes this time, really too many
to list individually. Many stack fixes, even rfkill
(found by simulation and the new eevdf scheduler)!
Also a bigger maintainers file cleanup, to remove old
and redundant information.
* tag 'wireless-2023-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (32 commits)
wifi: iwlwifi: mvm: Fix incorrect usage of scan API
wifi: mac80211: Create resources for disabled links
wifi: cfg80211: avoid leaking stack data into trace
wifi: mac80211: allow transmitting EAPOL frames with tainted key
wifi: mac80211: work around Cisco AP 9115 VHT MPDU length
wifi: cfg80211: Fix 6GHz scan configuration
wifi: mac80211: fix potential key leak
wifi: mac80211: fix potential key use-after-free
wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling
wifi: brcmfmac: Replace 1-element arrays with flexible arrays
wifi: mwifiex: Fix oob check condition in mwifiex_process_rx_packet
wifi: rtw88: rtw8723d: Fix MAC address offset in EEPROM
rfkill: sync before userspace visibility/changes
wifi: mac80211: fix mesh id corruption on 32 bit systems
wifi: cfg80211: add missing kernel-doc for cqm_rssi_work
wifi: cfg80211: fix cqm_config access race
wifi: iwlwifi: mvm: Fix a memory corruption issue
wifi: iwlwifi: Ensure ack flag is properly cleared.
wifi: iwlwifi: dbg_ini: fix structure packing
iwlwifi: mvm: handle PS changes in vif_cfg_changed
...
====================
Link: https://lore.kernel.org/r/20230927095835.25803-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The drm-stats fdinfo tags made available to user space are drm-engine,
drm-cycles, drm-max-freq and drm-curfreq, one per job slot.
This deviates from standard practice in other DRM drivers, where a single
set of key:value pairs is provided for the whole render engine. However,
Panfrost has separate queues for fragment and vertex/tiler jobs, so a
decision was made to calculate bus cycles and workload times separately.
Maximum operating frequency is calculated at devfreq initialisation time.
Current frequency is made available to user space because nvtop uses it
when performing engine usage calculations.
It is important to bear in mind that both GPU cycle and kernel time numbers
provided are at best rough estimations, and always reported in excess from
the actual figure because of two reasons:
- Excess time because of the delay between the end of a job processing,
the subsequent job IRQ and the actual time of the sample.
- Time spent in the engine queue waiting for the GPU to pick up the next
job.
To avoid race conditions during enablement/disabling, a reference counting
mechanism was introduced, and a job flag that tells us whether a given job
increased the refcount. This is necessary, because user space can toggle
cycle counting through a debugfs file, and a given job might have been in
flight by the time cycle counting was disabled.
The main goal of the debugfs cycle counter knob is letting tools like nvtop
or IGT's gputop switch it at any time, to avoid power waste in case no
engine usage measuring is necessary.
Also add a documentation file explaining the possible values for fdinfo's
engine keystrings and Panfrost-specific drm-curfreq-<keystr> pairs.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230929181616.2769345-3-adrian.larumbe@collabora.com
|
|
Commit 9431063ad323 ("dpll: core: Add DPLL framework base functions") adds
the section DPLL SUBSYSTEM in MAINTAINERS and includes a file entry to the
non-existing file 'include/net/dpll.h'.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference. Looking at the file stat of the commit above, this entry
clearly intended to refer to 'include/linux/dpll.h'.
Adjust this header file entry in DPLL SUBSYSTEM.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add maintainers for LoongArch KVM.
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the latest bug fixes that have come up in the soc tree. Most
of these are fairly minor. Most notably, the majority of changes this
time are not for dts files as usual.
- Updates to the addresses of the broadcom and aspeed entries in the
MAINTAINERS file.
- Defconfig updates to address a regression on samsung and a build
warning from an unknown Kconfig symbol
- Build fixes for the StrongARM and Uniphier platforms
- Code fixes for SCMI and FF-A firmware drivers, both of which had a
simple bug that resulted in invalid data, and a lesser fix for the
optee firmware driver
- Multiple fixes for the recently added loongson/loongarch "guts" soc
driver
- Devicetree fixes for RISC-V on the startfive platform, addressing
issues with NOR flash, usb and uart.
- Multiple fixes for NXP i.MX8/i.MX9 dts files, fixing problems with
clock, gpio, hdmi settings and the Makefile
- Bug fixes for i.MX firmware code and the OCOTP soc driver
- Multiple fixes for the TI sysc bus driver
- Minor dts updates for TI omap dts files, to address boot time
warnings and errors"
* tag 'soc-fixes-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits)
MAINTAINERS: Fix Florian Fainelli's email address
arm64: defconfig: enable syscon-poweroff driver
ARM: locomo: fix locomolcd_power declaration
soc: loongson: loongson2_guts: Remove unneeded semicolon
soc: loongson: loongson2_guts: Convert to devm_platform_ioremap_resource()
soc: loongson: loongson_pm2: Populate children syscon nodes
dt-bindings: soc: loongson,ls2k-pmc: Allow syscon-reboot/syscon-poweroff as child
soc: loongson: loongson_pm2: Drop useless of_device_id compatible
dt-bindings: soc: loongson,ls2k-pmc: Use fallbacks for ls2k-pmc compatible
soc: loongson: loongson_pm2: Add dependency for INPUT
arm64: defconfig: remove CONFIG_COMMON_CLK_NPCM8XX=y
ARM: uniphier: fix cache kernel-doc warnings
MAINTAINERS: aspeed: Update Andrew's email address
MAINTAINERS: aspeed: Update git tree URL
firmware: arm_ffa: Don't set the memory region attributes for MEM_LEND
arm64: dts: imx: Add imx8mm-prt8mm.dtb to build
arm64: dts: imx8mm-evk: Fix hdmi@3d node
soc: imx8m: Enable OCOTP clock for imx8mm before reading registers
arm64: dts: imx8mp-beacon-kit: Fix audio_pll2 clock
arm64: dts: imx8mp: Fix SDMA2/3 clocks
...
|
|
Commit 31345a0f5901 ("MAINTAINERS: Replace my email address") added 13
instances of ...@broadcom.com and one of only ...@broadcom. I didn't
double check if Broadcom really owns that TLD, but git send-email
doesn't accept it, so add ".com" to that one bogous(?) instance.
Fixes: 31345a0f5901 ("MAINTAINERS: Replace my email address")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
It's an oversight to not have already listed Gustavo here. Add him as a
Reviewer.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Since __counted_by annotations may also require that code be changed to
get initialization ordering correct, let's get an extra group of eyes on
code that is working on these annotations.
Signed-off-by: Kees Cook <keescook@chromium.org>
|
