Merge tag 'iio-for-4.15c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third set of new device support, cleanups and features for IIO in the 4.15 cycle

New device support
* ti-dac082s085 dac
  - new driver supporting 8, 10 and 12 bit TI DACs with 2 and 4 channels:
    DAC082S085, DAC102S085, DAC122S085, DAC104s085 and DAC124S085.

Minor features and cleanps
* adc12138
  - make array ch_to_mux static for small object code size reduction.
* sun4i-gpadc
  - use of_device_get_match_data rather than opencoding it.
* stm32 trigger
  - add tim15 tigger on STM32H7
  - check clock rate to avoid potential division by zero
* tsl2x7x staging cleanups.
  - move *_thresh_period to being created by IIO core.
  - remove unused tsl2x7x_parse_result structure.
  - sort includes
  - drop a repeat iio_dev forward definition
  - fix some code alignment of defines.
  - use IIO_CONST_ATTR for constant string attribute
  - drop some unnecessary parentheses
  - fix various alignment with parenthese
  - rename power defines for readability reasons
  - fix a missaligned break statement
  - Tidy up function definitions so they fit on a single line.

2 files changed, 35 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 3fc79185cc56a5..2e3f919485f49f 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -522,6 +522,7 @@ Description:
 		Specifies the output powerdown mode.
 		DAC output stage is disconnected from the amplifier and
 		1kohm_to_gnd: connected to ground via an 1kOhm resistor,
+		2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor,
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
 		90kohm_to_gnd: connected to ground via a 90kOhm resistor,
diff --git a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt
new file mode 100644
index 00000000000000..9cb0e10df704aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt
@@ -0,0 +1,34 @@
+Texas Instruments 8/10/12-bit 2/4-channel DAC driver
+
+Required properties:
+ - compatible:		Must be one of:
+			"ti,dac082s085"
+			"ti,dac102s085"
+			"ti,dac122s085"
+			"ti,dac084s085"
+			"ti,dac104s085"
+			"ti,dac124s085"
+ - reg: 		Chip select number.
+ - spi-cpha, spi-cpol:	SPI mode (0,1) or (1,0) must be used, so specify
+			either spi-cpha or spi-cpol (but not both).
+ - vref-supply: 	Phandle to the external reference voltage supply.
+
+For other required and optional properties of SPI slave nodes please refer to
+../../spi/spi-bus.txt.
+
+Example:
+	vref_2v5_reg: regulator-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "2v5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	dac@0 {
+		compatible = "ti,dac082s085";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		spi-cpol;
+		vref-supply = <&vref_2v5_reg>;
+	};